mibs/MIBS/trellix/MCAFEE-ATD-MIB
2023-12-05 12:25:34 +01:00

297 lines
8.2 KiB
Plaintext

-- *****************************************************************
-- MCAFEE-ATD.mib:
-- McAfee Enterprise Structure of Management Information
-- Nov 2014, Pravin Yarolkar, Pawan Bhandari
-- Jan 2018, Vibhavari Mandal
-- Copyright (c) 2014 by McAfee, Inc.
-- All rights reserved.
--
-- *****************************************************************
MCAFEE-ATD-MIB DEFINITIONS ::= BEGIN
--
-- Top-level infrastructure of the Mcafee-ATD product MIB tree
--
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32 FROM SNMPv2-SMI
matdProducts
FROM MCAFEE-INTRUVERT-SMI;
mcAfeeATDMIB MODULE-IDENTITY
LAST-UPDATED "201411200000Z"
ORGANIZATION "McAfee, Inc."
CONTACT-INFO
"McAfee Customer Service Department
Postal: 5000 Headquarters Drive
Plano, TX 75024
USA
Tel: +1 800 338 8754
E-mail: support@mcafee.com"
DESCRIPTION
"Top-level infrastructure of the MATD product under enterprise.mcafee-intruvert MIB tree."
REVISION "201411170000Z"
DESCRIPTION
"Initial Draft"
::= { matdProducts 1}
mcAfeeATDMIBObjects OBJECT IDENTIFIER ::= { mcAfeeATDMIB 1 }
atdCPUUtilizationAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides CPU utilization of the system."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 1 }
atdMemoryUtilization OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides Memory utilization of the system."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 2 }
atdHDDSystemSpaceUtilization OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides HDD system space utilization of the system."
::= { mcAfeeATDMIBObjects 3 }
atdHDDDataSpaceUtilization OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides HDD data space utilization of the system."
::= { mcAfeeATDMIBObjects 4 }
atdInterfaceCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtdInterfaceCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to list the received and sent packets over physical interfaces present in the system."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 5 }
atdInterfaceCountEntry OBJECT-TYPE
SYNTAX AtdInterfaceCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the atdInterfaceCountTable."
INDEX { atdInterfaceCountIndex }
::= { atdInterfaceCountTable 1 }
AtdInterfaceCountEntry ::= SEQUENCE
{
atdInterfaceCountIndex INTEGER,
atdInterfaceCountRx INTEGER,
atdInterfaceCountTx INTEGER
}
atdInterfaceCountIndex OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The auxiliary variable used for identifying instances of the columnar objects in the atdInterfaceCountTable."
::= { atdInterfaceCountEntry 1 }
atdInterfaceCountRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received packets on given interface."
DEFVAL { 0 }
::= { atdInterfaceCountEntry 2 }
atdInterfaceCountTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmitted packets on given interface."
DEFVAL { 0 }
::= { atdInterfaceCountEntry 3 }
atdFileWaiting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides number of sample in waiting in the system."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 6 }
atdFileAnalyzing OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides number of sample in analyzing in the system."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 7 }
atdSystemTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides system temperature."
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 8 }
atdSystemHealth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides system health.Value is
1 if SYSTEM health is GOOD
0 if SYETM health is BAD"
DEFVAL { 0}
::= { mcAfeeATDMIBObjects 9 }
atdBackupSchedulerStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides configured backup scheduler status. Value is
1 if Backup Scheduler Status is OK
0 if Backup Scheduler status is Failed"
DEFVAL { 0}
::= { mcAfeeATDMIBObjects 10 }
atdLoadBalancerStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides ATD Load Balancer Status. Value is
0 if device is in standalone mode
1 if LB status is DOWN
2 if LB status is UP and RUNNING
3 if Node status is SW VERSION MISMATCH
4 if Primary Node LB services are not UP
5 if SCP failed
6 if VM creation failed
7 if Invalid Status"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 11 }
atdEmailConnectorStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides ATD Email Connector Status.Value is
0 if Email Connector status is DISABLED
1 if EmailConnector status is Enabled and EmailConnector health is GOOD
2 if EmailConnector health is DEGRADED
3 if EmailConnector health is OVERLOADED"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 12 }
atdEmailGatewayWaitTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether system waittime is more than Email Gateway Wait Time threshold waittime. Value is
1 if threshold is reached
0 otherwise"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 13 }
atdMalwareInterfaceStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides ATD Malware Interface status. Value is
1 if interface status is UP
0 if interface status is DOWN"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 14 }
atdLicenseStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides ATD License Status. Value is
1 if License is VALID
2 if License is INVALID
3 if License is EXPIRED"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 15 }
atdDXLChannelStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides DXL status. Value is
1 if DXL is UP
0 if DXL is DOWN"
DEFVAL {0}
::= { mcAfeeATDMIBObjects 16 }
atdSensorStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides Sensor status. Value is
0 if Sensor status is INACTIVE
1 if Sensor status is ACTIVE
2 if Sensor status is NOT CONNECTED"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 17 }
atdTAXIIStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides TAXII Status. Value is
0 if TAXII channel health is DOWN
1 if TAXII channel health is UP
2 if TAXII channel health is UNKNOWN"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 18 }
atdHDDVarSpaceUtilization OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides Var disk utilization in %"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 19 }
atdMalwareDNSStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides Malware DNS status. Value is
1 if MALWARE DNS status is good
0 if MALWARE DNS status is bad"
DEFVAL { 0 }
::= { mcAfeeATDMIBObjects 20 }
END