2194 lines
66 KiB
Plaintext
2194 lines
66 KiB
Plaintext
-- *****************************************************************
|
|
-- UBQS-INTERFACE-MIB
|
|
--
|
|
-- May 2009, Park Hyung Eun
|
|
--
|
|
-- Copyright (c) 2009 by Ubiquoss, Corp.
|
|
--
|
|
-- All rights reserved.
|
|
-- ***************************************************************
|
|
|
|
UBQS-INTERFACE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Gauge32,
|
|
Unsigned32,
|
|
Integer32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
RowStatus,
|
|
TruthValue,
|
|
TimeStamp,
|
|
DisplayString,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ifIndex,
|
|
InterfaceIndexOrZero,
|
|
ifName,
|
|
ifType,
|
|
ifAdminStatus,
|
|
ifOperStatus
|
|
FROM IF-MIB
|
|
entPhysicalIndex
|
|
FROM ENTITY-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
VlanIndex,
|
|
FROM Q-BRIDGE-MIB
|
|
UbiPortList,
|
|
UbiBridgeId,
|
|
Unsigned64,
|
|
IfOperStatusReason
|
|
FROM UBQS-TC
|
|
ubiMgmtv2
|
|
FROM UBQS-SMI;
|
|
|
|
|
|
ubiInterfaceMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200905260000Z"
|
|
ORGANIZATION "Ubiquoss Corp."
|
|
CONTACT-INFO
|
|
" Ubiquoss
|
|
Customer Service
|
|
|
|
Postal: 24F Milennium B/D,
|
|
467-12, Dogok-Dong,
|
|
GangNam-Gu, Seoul 135-270
|
|
Korea
|
|
|
|
Tel: 82-2-2190-3100"
|
|
DESCRIPTION
|
|
"A MIB module for the physical interface
|
|
in IF-MIB (RFC2863)."
|
|
::= { ubiMgmtv2 4 }
|
|
|
|
|
|
|
|
-- ***********************************************************
|
|
-- Textual Conventions
|
|
-- ***********************************************************
|
|
|
|
PortType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the port type."
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following (no transceiver, bad eeprom and so on)
|
|
|
|
-- 10/100 Ethernet
|
|
e100BaseUnknown(10), -- Unknown Fiber Fast Ethernet
|
|
e10BaseT(11), -- UTP Ethernet
|
|
e10BaseF(12), -- Multi Mode fiber Ethernet
|
|
e100BaseTX(13), -- UTP Fast Ethernet (Cat 5)
|
|
e100BaseT4(14), -- UTP Fast Ethernet (Cat 3)
|
|
e100BaseF(15), -- Multi Mode fiber Fast Ethernet
|
|
e100BaseLX(16), -- Long Wave fiber Fast Ethernet
|
|
e100BaseFsm(17), -- Single Mode fiber Fast Ethernet
|
|
e10a100BaseTX(18), -- 10/100 UTP Ethernet(Cat 3/5)
|
|
e100BaseBX10(19),
|
|
e100BaseBX10D(20), -- Fiber Fast Ethernet bi-directional
|
|
-- 10km Downlink over SMF
|
|
e100BaseBX10U(21), -- Fiber Fast Ethernet bi-directional
|
|
-- 10km Uplink over SMF
|
|
e100BaseSX(22), -- Short Wave Fiber Fast Ethernet
|
|
|
|
|
|
-- Gigabit Ethernet
|
|
e1000BaseUnknown(100), -- Unknown Giga Ethernet
|
|
e1000BaseLX(101), -- Long Wave fiber Giga Ethernet
|
|
e1000BaseSX(102), -- Short Wave fiber Giga Ethernet
|
|
e1000BaseCX(103), -- Copper Gigabit Ethernet
|
|
e1000BaseLH(104), -- Long Haul fiber Giga Ethernet
|
|
e1000BaseT(105), -- Twisted Pair Giga Ethernet
|
|
e10a100a1000BaseT(106), -- 10/100/1000 BaseT
|
|
e1000BaseZX(107), -- Extended Reach Giga Ethernet
|
|
|
|
e1000BaseBX(108), -- ubiquoss
|
|
e1000BaseBX10D(109), -- Giga Ethernet bi-directional 10km
|
|
-- Downlink over SMF
|
|
e1000BaseBX10U(110), -- Giga Ethernet bi-directional 10km
|
|
-- Uplink over SMF
|
|
e1000BasePX(111), -- ubiquoss
|
|
e1000BaseBT(112), -- BT Giga Ethernet
|
|
e1000BaseSvc(113), -- Service Module Giga Ethernet
|
|
e1000BasePXPon(114), -- Unknown Pon
|
|
e1000BasePX20(115), -- Pon 20km
|
|
e1000BasePX30(116), -- Pon 30km
|
|
|
|
|
|
-- 10 Gigabit Ethernet
|
|
e10GBaseUnknown(1000), -- Unknown 10G
|
|
e10GBaseCPX(1001), --10GE Parallel 860nm Laser
|
|
e10GBaseLX4(1002), -- 10GE Wide-WDM 1310nm Laser
|
|
e10GBaseEX4(1003), -- 10GE Wide-WDM 1550 Laser
|
|
e10GBaseLR(1004), -- 10GE Serial 1310nm Laser
|
|
e10GBaseSX4(1005), -- 10GE Wide-WDM 850nm Laser
|
|
e10GBaseER(1006), -- 10GE Serial 1550nm Laser
|
|
e10GBaseSR(1007), -- 10GE Serial 850nm Laser
|
|
e10GBaseCX4(1008), -- 10GE XAUI Copper
|
|
e10GBaseSW(1009), -- 10GE Laser
|
|
e10GBaseLW(1010), -- 10GE Laser
|
|
e10GBaseEW(1011), -- 10GE Laser
|
|
e10GBaseSvc(1012), -- Service Module 10G Ethernet
|
|
e10GBaseZR(1013), -- 10GE Laser
|
|
e100BaseEX(1014), -- Fiber Fast Ethernet
|
|
e100BaseZX(1015), -- Extended Reach Fiber Fast Ethernet
|
|
e10GBaseLRM(1016), -- 10GE Laser 300m over 50um Multi Mode Fiber
|
|
e10GBaseT(1017), -- 10GE Laser twisted pair
|
|
e10GBaseSfpPlus(1018), -- 10GE SFP PLUS
|
|
e10GBaseEPON(1019), -- 10GE EPON
|
|
|
|
-- 40 Gigabit Ethernet
|
|
e40GBaseUnknown(2000), -- Unknown 40G
|
|
e40GBaseCR4(2001), -- 40GE Twin-ax copper cable
|
|
e40GBaseSR4(2002), -- 40GE Serial 850nm Laser
|
|
e40GBaseLR4(2003), -- 40GE Serial 1300nm Laser
|
|
e40GXLPPI(2004) -- 40GE Active Cable
|
|
}
|
|
|
|
PortGBICTypeList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the type of slot."
|
|
SYNTAX INTEGER {
|
|
none(0), -- unequipped
|
|
other(1), -- equipped, none of the following list
|
|
sfp(2),
|
|
xfp(3),
|
|
sfp-plus(4),
|
|
qsfp-plus(5)
|
|
}
|
|
|
|
UbiSwitchportType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port type. The possible port types are:
|
|
customerVlanPort(0) - Indicates a port is a C-tag
|
|
aware port of an enterprise VLAN aware bridge.
|
|
|
|
providerNetworkPort(1) - Indicates a port is an S-tag
|
|
aware port of a Provider Bridge or Backbone Edge
|
|
Bridge used for connections within a PBN or PBBN.
|
|
|
|
customerNetworkPort(2) - Indicates a port is an S-tag
|
|
aware port of a Provider Bridge or Backbone Edge
|
|
Bridge used for connections to the exterior of a
|
|
PBN or PBBN.
|
|
|
|
customerEdgePort(3) - Indicates a port is a C-tag
|
|
aware port of a Provider Bridge used for connections
|
|
to the exterior of a PBN or PBBN.
|
|
|
|
customerBackbonePort(4) - Indicates a port is a I-tag
|
|
aware port of a Backbone Edge Bridge's B-component.
|
|
|
|
virtualInstancePort(5) - Indicates a port is a virtual
|
|
S-tag aware port within a Backbone Edge Bridge's
|
|
I-component which is responsible for handling
|
|
S-tagged traffic for a specific backbone service
|
|
instance.
|
|
|
|
dBridgePort(6) - Indicates a port is a VLAN-unaware
|
|
member of an 802.1D bridge.
|
|
access(7)
|
|
trunk(8)
|
|
hybrid(9) "
|
|
|
|
SYNTAX BITS {
|
|
customerVlanPort(0),
|
|
providerNetworkPort(1),
|
|
customerNetworkPort(2),
|
|
customerEdgePort(3),
|
|
customerBackbonePort(4),
|
|
virtualInstancePort(5),
|
|
dBridgePort(6),
|
|
access(7),
|
|
trunk(8),
|
|
hybrid(9)
|
|
}
|
|
|
|
UbiFlowctrlWatermark ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"represent flowcontrol watermark value :
|
|
|
|
'3d 3d'
|
|
|
|
--------------------------
|
|
first value = wmpause(0-255)
|
|
second value = wmcancel(0-255)"
|
|
SYNTAX OCTET STRING (SIZE(7))
|
|
|
|
-- ***************************************************************
|
|
-- ubiInterfaceMIB
|
|
-- ***************************************************************
|
|
ubiInterfaceMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiInterfaceMIB 0 }
|
|
ubiInterfaceMIBObjects OBJECT IDENTIFIER ::= { ubiInterfaceMIB 1 }
|
|
ubiInterfaceMIBConformance OBJECT IDENTIFIER ::= { ubiInterfaceMIB 2 }
|
|
|
|
|
|
|
|
ubiIfNotificationEnables OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 1 }
|
|
ubiPortExt OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 3 }
|
|
ubiSwitchPort OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 4 }
|
|
ubiPortTrafficControl OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 5 }
|
|
ubiIfStatistics OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 6 }
|
|
ubiPortControl OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 7 }
|
|
ubiIfErps OBJECT IDENTIFIER ::= { ubiInterfaceMIBObjects 8 }
|
|
|
|
|
|
-- subtable of ubiIfNotificationEnables
|
|
ubiGrp1 OBJECT IDENTIFIER ::= { ubiIfNotificationEnables 1 }
|
|
ubiGrp2 OBJECT IDENTIFIER ::= { ubiIfNotificationEnables 2 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiInterfaceMIBNotificationPrefix
|
|
-- ***********************************************************
|
|
ubiInterfaceNotifications OBJECT IDENTIFIER ::= { ubiInterfaceMIBNotificationPrefix 0 }
|
|
ubiTrafficControlNotifications OBJECT IDENTIFIER ::= { ubiInterfaceMIBNotificationPrefix 1 }
|
|
|
|
|
|
ubiPortAutoNegoFault NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiPortName,
|
|
ubiPortAutoNegoFaultState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ubiPortAutoNegoFault notification is sent
|
|
at auto negotiation failure for a particular physical
|
|
port."
|
|
::= { ubiInterfaceNotifications 1 }
|
|
|
|
ubiLoadMonitorRisingAlarm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiPortName,
|
|
ubiLoadMonitorType,
|
|
ubiLoadMonitorVariable,
|
|
ubiLoadMonitorValue,
|
|
ubiLoadMonitorAlarmType,
|
|
ubiLoadMonitorCriticalThreshold,
|
|
ubiLoadMonitorMajorThreshold,
|
|
ubiLoadMonitorUnit,
|
|
ubiLoadMonitorAlarmZone
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ubiLoadMonitorRisingAlarm notification is sent
|
|
when the ubiLoadMonitorValue crosses its rising threshold."
|
|
::= { ubiTrafficControlNotifications 1 }
|
|
|
|
ubiLoadMonitorFallingAlarm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ubiPortName,
|
|
ubiLoadMonitorType,
|
|
ubiLoadMonitorVariable,
|
|
ubiLoadMonitorValue,
|
|
ubiLoadMonitorAlarmType,
|
|
ubiLoadMonitorCriticalThreshold,
|
|
ubiLoadMonitorMajorThreshold,
|
|
ubiLoadMonitorUnit,
|
|
ubiLoadMonitorAlarmZone
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ubiLoadMonitorRisingAlarm notification is sent
|
|
when the ubiLoadMonitorValue crosses its falling threshold."
|
|
::= { ubiTrafficControlNotifications 2 }
|
|
|
|
ubiTrafficControlRisingAlarm NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ubiPortName,
|
|
ubiTrafficControlBaseType,
|
|
ubiTrafficControlType,
|
|
ubiTrafficControlDirection,
|
|
ubiTrafficControlStatus,
|
|
ubiTrafficControlHighThreshold,
|
|
ubiTrafficControlLowThreshold,
|
|
ubiTrafficControlAverageRate,
|
|
ubiTrafficControlOneMinRate,
|
|
ubiTrafficControlAlarmCount
|
|
}
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ubiTrafficControlRisingAlarm is sent
|
|
when ubiTrafficControlOneMinRate is greater than current threshold."
|
|
::= { ubiTrafficControlNotifications 3 }
|
|
|
|
ubiTrafficControlFallingAlarm NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
ubiPortName,
|
|
ubiTrafficControlBaseType,
|
|
ubiTrafficControlType,
|
|
ubiTrafficControlDirection,
|
|
ubiTrafficControlStatus,
|
|
ubiTrafficControlHighThreshold,
|
|
ubiTrafficControlLowThreshold,
|
|
ubiTrafficControlAverageRate,
|
|
ubiTrafficControlOneMinRate,
|
|
ubiTrafficControlAlarmCount
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A ubiTrafficControlFallingAlarm is sent
|
|
when ubiTrafficControlOneMinRate is less than current threshold."
|
|
::= { ubiTrafficControlNotifications 4 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfNotificationEnables
|
|
-- ***********************************************************
|
|
|
|
ubiLinkUpDownEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
produces the notification of linkup/down."
|
|
DEFVAL { false }
|
|
::= { ubiGrp1 1 }
|
|
|
|
|
|
ubiPortAutoNegoFaultEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
produces the notification of the auto negotiation
|
|
failure for a particular physical port."
|
|
DEFVAL { false }
|
|
::= { ubiGrp2 1 }
|
|
|
|
ubiLoadMonitorAlarmEnabled OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
input(0),
|
|
crc(1),
|
|
error(2),
|
|
drop(3),
|
|
output(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
produces the notification of ubiLoadMonitorRisingAlarm
|
|
and ubiLoadMonitorFallingAlarm."
|
|
::= { ubiGrp2 2 }
|
|
|
|
ubiTrafficControlAlarmEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates whether the system
|
|
produces the notification of ubiTrafficControlRisingAlarm
|
|
and ubiTrafficControlFallingAlarm."
|
|
DEFVAL { false }
|
|
::= { ubiGrp2 3 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfPortTable
|
|
-- ***********************************************************
|
|
|
|
ubiPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects which provide
|
|
more information about physical interface."
|
|
::= { ubiInterfaceMIBObjects 2 }
|
|
|
|
ubiPortEntry OBJECT-TYPE
|
|
SYNTAX UbiPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing management information
|
|
applicable to a particular physical interface."
|
|
INDEX { ifIndex }
|
|
::= { ubiPortTable 1 }
|
|
|
|
UbiPortEntry ::= SEQUENCE {
|
|
ubiPortName DisplayString,
|
|
ubiPortType PortType,
|
|
ubiPortOperStatus INTEGER,
|
|
-- ubiPortGBICStatus INTEGER,
|
|
-- ubiPortGBICType PortGBICTypeList,
|
|
ubiPortDuplex INTEGER,
|
|
ubiPortSpeed INTEGER,
|
|
ubiPortAdminDuplex INTEGER,
|
|
ubiPortAdminSpeed INTEGER,
|
|
ubiPortMtu Integer32,
|
|
ubiPortL2L3IfState INTEGER,
|
|
ubiPortAutoNegoFaultState INTEGER,
|
|
ubiPortReset INTEGER,
|
|
ubiPortGBICSerialNumber DisplayString,
|
|
ubiPortLocalSwitching INTEGER
|
|
}
|
|
|
|
ubiPortName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical port name."
|
|
::= { ubiPortEntry 1 }
|
|
|
|
ubiPortType OBJECT-TYPE
|
|
SYNTAX PortType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the physical port."
|
|
::= { ubiPortEntry 2 }
|
|
|
|
ubiPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
down(1),
|
|
up(2), -- status ok
|
|
disable(3) -- disable
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational status of the port.
|
|
down(1) is down
|
|
up(2) is up
|
|
disable(3) is administratively down"
|
|
::= { ubiPortEntry 3 }
|
|
|
|
-- ubiPortGBICStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- none(0),
|
|
-- in(1),
|
|
-- out(2)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The current operational status of the equipped slot."
|
|
-- ::= { ubiPortEntry 4 }
|
|
|
|
|
|
-- ubiPortGBICType OBJECT-TYPE
|
|
-- SYNTAX PortGBICTypeList
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The current GBIC Type of the equipped slot."
|
|
-- ::= { ubiPortEntry 5 }
|
|
|
|
|
|
ubiPortDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
half(1),
|
|
full(2),
|
|
auto(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the port is operating in half-
|
|
duplex, full-duplex or auto negotiation mode."
|
|
::= { ubiPortEntry 4 }
|
|
|
|
|
|
ubiPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
speed_10(10),
|
|
speed_100(100),
|
|
speed_1000(1000),
|
|
speed_2500(2500),
|
|
speed_10000(10000),
|
|
speed_40000(40000)
|
|
}
|
|
UNITS "Mbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational speed of the port."
|
|
::= { ubiPortEntry 5 }
|
|
|
|
|
|
ubiPortAdminDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
half(1),
|
|
full(2),
|
|
auto(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired duplex of the port."
|
|
::= { ubiPortEntry 6 }
|
|
|
|
ubiPortAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
speed_10(10),
|
|
speed_100(100),
|
|
speed_1000(1000),
|
|
speed_2500(2500),
|
|
speed_10000(10000),
|
|
speed_40000(40000)
|
|
}
|
|
UNITS "Mbps"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired speed of the port."
|
|
::= { ubiPortEntry 7 }
|
|
|
|
ubiPortMtu OBJECT-TYPE
|
|
SYNTAX Integer32 (1500..10218 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MTU value of the port."
|
|
DEFVAL { 1500 }
|
|
::= { ubiPortEntry 8 }
|
|
|
|
ubiPortL2L3IfState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routed(1),
|
|
switchport(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational mode of the port whether the port
|
|
is layer 2 or layer 3."
|
|
::= { ubiPortEntry 9 }
|
|
|
|
|
|
ubiPortAutoNegoFaultState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1),
|
|
fail(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link is down due to auto negotiation failure.
|
|
This state indicates the state of auto negotiation
|
|
failure for a particular port. But it's used for
|
|
notification only."
|
|
::= { ubiPortEntry 10 }
|
|
|
|
ubiPortReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
reset(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset the physical port."
|
|
::= { ubiPortEntry 11 }
|
|
|
|
ubiPortLocalSwitching OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port local-switching"
|
|
::= { ubiPortEntry 12 }
|
|
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiPortExtTable
|
|
-- ***********************************************************
|
|
|
|
ubiPortExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiPortExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains objects which provide
|
|
more information about physical interface."
|
|
::= { ubiPortExt 1 }
|
|
|
|
ubiPortExtEntry OBJECT-TYPE
|
|
SYNTAX UbiPortExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing management information
|
|
applicable to a particular physical interface."
|
|
INDEX { ifIndex }
|
|
::= { ubiPortExtTable 1 }
|
|
|
|
UbiPortExtEntry ::= SEQUENCE {
|
|
ubiPortGBICStatus INTEGER,
|
|
ubiPortGBICType PortGBICTypeList,
|
|
ubiPortGBICSerialNumber DisplayString
|
|
}
|
|
|
|
ubiPortGBICStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
in(1),
|
|
out(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational status of the equipped slot."
|
|
::= { ubiPortExtEntry 1 }
|
|
|
|
|
|
ubiPortGBICType OBJECT-TYPE
|
|
SYNTAX PortGBICTypeList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current GBIC Type of the equipped slot.
|
|
none(0): unequipped
|
|
other(1) : equipped, none of the following list
|
|
sfp(2)
|
|
xfp(3)
|
|
sfp-plus(4) "
|
|
::= { ubiPortExtEntry 2 }
|
|
|
|
|
|
ubiPortGBICSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of this GBIC."
|
|
::= { ubiPortExtEntry 3 }
|
|
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiSwitchPortTable
|
|
-- ***********************************************************
|
|
|
|
ubiSwitchportTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiSwitchportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains the information for switchport."
|
|
::= { ubiSwitchPort 1 }
|
|
|
|
ubiSwitchportEntry OBJECT-TYPE
|
|
SYNTAX UbiSwitchportEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each switchport."
|
|
INDEX { ifIndex }
|
|
::= { ubiSwitchportTable 1 }
|
|
|
|
|
|
UbiSwitchportEntry ::= SEQUENCE
|
|
{
|
|
ubiSwitchportName DisplayString,
|
|
ubiSwitchportMode UbiSwitchportType,
|
|
ubiSwitchportBridgeId UbiBridgeId,
|
|
ubiSwitchportVlanNative VlanIndex,
|
|
ubiSwitchportVlanDefault VlanIndex
|
|
}
|
|
|
|
ubiSwitchportName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information about
|
|
the interface."
|
|
::= { ubiSwitchportEntry 1 }
|
|
|
|
ubiSwitchportMode OBJECT-TYPE
|
|
SYNTAX UbiSwitchportType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A port type. The possible port types are:
|
|
customerVlanPort(0) - Indicates a port is a C-tag
|
|
aware port of an enterprise VLAN aware bridge.
|
|
|
|
providerNetworkPort(1) - Indicates a port is an S-tag
|
|
aware port of a Provider Bridge or Backbone Edge
|
|
Bridge used for connections within a PBN or PBBN.
|
|
|
|
customerNetworkPort(2) - Indicates a port is an S-tag
|
|
aware port of a Provider Bridge or Backbone Edge
|
|
Bridge used for connections to the exterior of a
|
|
PBN or PBBN.
|
|
|
|
customerEdgePort(3) - Indicates a port is a C-tag
|
|
aware port of a Provider Bridge used for connections
|
|
to the exterior of a PBN or PBBN.
|
|
|
|
customerBackbonePort(4) - Indicates a port is a I-tag
|
|
aware port of a Backbone Edge Bridge's B-component.
|
|
|
|
virtualInstancePort(5) - Indicates a port is a virtual
|
|
S-tag aware port within a Backbone Edge Bridge's
|
|
I-component which is responsible for handling
|
|
S-tagged traffic for a specific backbone service
|
|
instance.
|
|
|
|
dBridgePort(6) - Indicates a port is a VLAN-unaware
|
|
member of an 802.1D bridge.
|
|
access(7)
|
|
trunk(8)
|
|
hybrid(9)
|
|
"
|
|
::= { ubiSwitchportEntry 2 }
|
|
|
|
ubiSwitchportBridgeId OBJECT-TYPE
|
|
SYNTAX UbiBridgeId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to allocate the bridge
|
|
group id."
|
|
::= { ubiSwitchportEntry 3 }
|
|
|
|
ubiSwitchportVlanNative OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The native vlan of a switchport."
|
|
::= { ubiSwitchportEntry 4 }
|
|
|
|
ubiSwitchportVlanDefault OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default vlan of a switchport."
|
|
::= { ubiSwitchportEntry 5 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiSwitchPortVlanControlTable
|
|
-- ***********************************************************
|
|
|
|
ubiSwitchPortVlanControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiSwitchPortVlanControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the control information
|
|
of vlan for switchport."
|
|
::= { ubiSwitchPort 2 }
|
|
|
|
ubiSwitchPortVlanControlEntry OBJECT-TYPE
|
|
SYNTAX UbiSwitchPortVlanControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of vlan control for each switchport."
|
|
INDEX { ifIndex, ubiVlanIndex }
|
|
::= { ubiSwitchPortVlanControlTable 1 }
|
|
|
|
|
|
UbiSwitchPortVlanControlEntry ::= SEQUENCE
|
|
{
|
|
ubiSwitchportVlanTaggedSet INTEGER,
|
|
ubiSwitchportVlanUntaggedSet INTEGER,
|
|
ubiSwitchportVlanEgressTaggedSet INTEGER
|
|
}
|
|
|
|
ubiSwitchportVlanTaggedSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0), -- none of the following
|
|
add(1),
|
|
delete(2),
|
|
except(3),
|
|
all(4),
|
|
none(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational set of the switchport for a specific
|
|
tagged vlan.
|
|
|
|
If a value of set is all(4), the vlan index
|
|
should be a zero.
|
|
"
|
|
::= { ubiSwitchPortVlanControlEntry 1 }
|
|
|
|
ubiSwitchportVlanUntaggedSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0), -- none of the following
|
|
add(1),
|
|
delete(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational set of the switchport for a specific
|
|
untagged vlan.
|
|
|
|
If a value of set is all(4), the vlan index
|
|
should be a zero.
|
|
"
|
|
::= { ubiSwitchPortVlanControlEntry 2 }
|
|
|
|
ubiSwitchportVlanEgressTaggedSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational set of the switchport for a egress
|
|
tagged vlan."
|
|
::= { ubiSwitchPortVlanControlEntry 3 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiSwitchVlanStackingTable
|
|
-- ***********************************************************
|
|
|
|
ubiSwitchVlanStackingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiSwitchVlanStackingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the stacking information
|
|
of vlan for switchport."
|
|
::= { ubiSwitchPort 3 }
|
|
|
|
ubiSwitchVlanStackingEntry OBJECT-TYPE
|
|
SYNTAX UbiSwitchVlanStackingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of vlan stacking for each switchport."
|
|
INDEX { ifIndex }
|
|
::= { ubiSwitchVlanStackingTable 1 }
|
|
|
|
|
|
UbiSwitchVlanStackingEntry ::= SEQUENCE
|
|
{
|
|
ubiVlanStackingMode INTEGER,
|
|
ubiVlanStackingEthertype DisplayString,
|
|
}
|
|
|
|
ubiVlanStackingMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
customerEdgePort (1),
|
|
providerPort (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"vlan-stacking mode"
|
|
::= { ubiSwitchVlanStackingEntry 1 }
|
|
|
|
ubiVlanStackingEthertype OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"vlan-stacking ethertype (format : 0xhhhh)"
|
|
::= { ubiSwitchVlanStackingEntry 2 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiLoadMonitorTable
|
|
-- ***********************************************************
|
|
|
|
ubiLoadMonitorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiLoadMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the information of load monitoring."
|
|
::= { ubiPortTrafficControl 1 }
|
|
|
|
|
|
ubiLoadMonitorEntry OBJECT-TYPE
|
|
SYNTAX UbiLoadMonitorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of load monitoring configuration."
|
|
INDEX { ifIndex, ubiLoadMonitorType }
|
|
::= { ubiLoadMonitorTable 1 }
|
|
|
|
|
|
UbiLoadMonitorEntry ::= SEQUENCE
|
|
{
|
|
ubiLoadMonitorType INTEGER,
|
|
ubiLoadMonitorInterval Integer32,
|
|
ubiLoadMonitorVariable OBJECT IDENTIFIER,
|
|
ubiLoadMonitorValue Counter64,
|
|
ubiLoadMonitorCriticalThreshold Integer32,
|
|
ubiLoadMonitorMajorThreshold Integer32,
|
|
ubiLoadMonitorUnit DisplayString,
|
|
ubiLoadMonitorAlarmType INTEGER,
|
|
ubiLoadMonitorRowStatus RowStatus,
|
|
ubiLoadMonitorAlarmZone INTEGER,
|
|
}
|
|
|
|
ubiLoadMonitorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
input(1),
|
|
crc(2),
|
|
error(3),
|
|
drop(4),
|
|
output(5),
|
|
storm-control-discard(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of load monitoring.
|
|
For example, If type is input, ubiLoadMonitorVariable
|
|
should be the particular variable related to the input
|
|
statistics."
|
|
::= { ubiLoadMonitorEntry 1 }
|
|
|
|
ubiLoadMonitorInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The monitoring interval."
|
|
::= { ubiLoadMonitorEntry 2 }
|
|
|
|
ubiLoadMonitorVariable OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object identifier of the particular variable
|
|
to be sampled for load monitoring.
|
|
this variable is decided by ubiLoadMonitorType.
|
|
|
|
variable mapping information for load monitoring:
|
|
type object identifier
|
|
--------------- -------------------------
|
|
INPUT ifHCInOctets (64bit)
|
|
OUTPUT ifHCOutOctets (64bit)
|
|
CRC ubiIfStatsInCRCErrors (64bit)
|
|
DISCARD ifInDiscards (32bit)
|
|
ERROR ifInErrors (32bit)
|
|
STORM-DISCARD ubiStormTotalDiscards (64bit)
|
|
"
|
|
::= { ubiLoadMonitorEntry 3 }
|
|
|
|
ubiLoadMonitorValue OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sampling value of the statistic for the
|
|
particular variable."
|
|
::= { ubiLoadMonitorEntry 4 }
|
|
|
|
ubiLoadMonitorCriticalThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The critical threshold for the sampled statistics."
|
|
::= { ubiLoadMonitorEntry 5 }
|
|
|
|
ubiLoadMonitorMajorThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The major threshold for the sampled statistics."
|
|
::= { ubiLoadMonitorEntry 6 }
|
|
|
|
ubiLoadMonitorUnit OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unit of the sampled statistics and
|
|
threshold value."
|
|
::= { ubiLoadMonitorEntry 7 }
|
|
|
|
|
|
ubiLoadMonitorAlarmType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
critical(1),
|
|
major(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alarm type. This object is used
|
|
for notification only."
|
|
::= { ubiLoadMonitorEntry 8 }
|
|
|
|
ubiLoadMonitorRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this entry."
|
|
::= { ubiLoadMonitorEntry 9}
|
|
|
|
ubiLoadMonitorAlarmZone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(0),
|
|
critical(1),
|
|
major(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current alarm zone. "
|
|
::= { ubiLoadMonitorEntry 10 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiTrafficControl
|
|
-- ***********************************************************
|
|
|
|
ubiTrafficControl OBJECT IDENTIFIER ::= { ubiPortTrafficControl 2 }
|
|
ubiTrafficControlConfig OBJECT IDENTIFIER ::= { ubiTrafficControl 1 }
|
|
|
|
ubiTrafficControlReportInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(1)
|
|
}(1..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval when alarm is up/down according to traffic count"
|
|
::= { ubiTrafficControlConfig 1 }
|
|
|
|
ubiTrafficControlObservingPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(1)
|
|
}(1..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period for counting traffic"
|
|
::= { ubiTrafficControlConfig 2 }
|
|
|
|
ubiTrafficControlHighAlarmMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
repeatable(0),
|
|
once(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action that is operated when traffic is over high-threshold"
|
|
::= { ubiTrafficControlConfig 3 }
|
|
|
|
ubiTrafficControlLowAlarmMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
once(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action that is operated when traffic is below low-threshold"
|
|
::= { ubiTrafficControlConfig 4 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiTrafficControlTable
|
|
-- ***********************************************************
|
|
--
|
|
-- ubiTrafficControlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF UbiTrafficControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The table for traffic-control configuration"
|
|
-- ::= { ubiTrafficControl 2 }
|
|
--
|
|
-- ubiTrafficControlEntry OBJECT-TYPE
|
|
-- SYNTAX UbiTrafficControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The entry representing traffic-control config.
|
|
-- Index description
|
|
-- a) ifindex : interface index
|
|
-- b) trafficBaseType : base type of traffic
|
|
-- value - pps(1), kbps(2)
|
|
-- c) trafficType : type of traffic
|
|
-- value - all(1), unicast(2), broadcast(3), multicast(4)
|
|
-- d) trafficDirection : direction of traffic
|
|
-- value - inbound(1), outbound(2)"
|
|
-- INDEX
|
|
-- {
|
|
-- ifindex,
|
|
-- trafficBaseType,
|
|
-- trafficType,
|
|
-- trafficDirection
|
|
-- }
|
|
-- ::= { ubiTrafficControlTable 1 }
|
|
--
|
|
-- UbiTrafficControlEntry ::= SEQUENCE {
|
|
-- ubiTrafficControlHighThreshold Integer32,
|
|
-- ubiTrafficControlLowThreshold Integer32,
|
|
-- ubiTrafficControlAction INTEGER,
|
|
-- ubiTrafficControlRowStatus RowStatus
|
|
-- }
|
|
--
|
|
-- ubiTrafficControlHighThreshold OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..1500000)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "traffic high-threshold.
|
|
-- kbps could has threshold less than 1000000."
|
|
-- ::= { ubiTrafficControlEntry 1 }
|
|
--
|
|
-- ubiTrafficControlLowThreshold OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..1500000)
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "traffic low-threshold.
|
|
-- kbps could has threshold less than 1000000."
|
|
-- ::= { ubiTrafficControlEntry 2 }
|
|
--
|
|
-- ubiTrafficControlAction OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- alarmOnly(1),
|
|
-- blockMode(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "traffic action type"
|
|
-- ::= { ubiTrafficControlEntry 3 }
|
|
--
|
|
-- ubiTrafficControlRowStatus OBJECT-TYPE
|
|
-- SYNTAX RowStatus
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "row status"
|
|
-- ::= { ubiTrafficControlEntry 4 }
|
|
--
|
|
-- ***********************************************************
|
|
-- ubiTrafficStatisticsTable
|
|
-- ***********************************************************
|
|
--
|
|
-- ubiTrafficStatisticsTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF UbiTrafficStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The table of traffic statistices per interface"
|
|
-- ::= { ubiTrafficControl 3 }
|
|
--
|
|
-- ubiTrafficStatisticsEntry OBJECT-TYPE
|
|
-- SYNTAX UbiTrafficStatisticsEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The entry representing intreface traffic statistics.
|
|
-- Index description
|
|
-- a) ifindex : interface index
|
|
-- b) trafficBaseType : base type of traffic
|
|
-- value - pps(0), kbps(1)
|
|
-- c) trafficType : type of traffic
|
|
-- value - all(0), unicast(1), broadcast(2), multicast(3)
|
|
-- d) trafficDirection : direction of traffic
|
|
-- value - inbound(0), outbound(1)"
|
|
-- INDEX
|
|
-- {
|
|
-- ifindex,
|
|
-- trafficBaseType,
|
|
-- TrafficType,
|
|
-- trafficDirection
|
|
-- }
|
|
-- ::= { ubiTrafficStatisticsTable 1 }
|
|
--
|
|
-- UbiTrafficStatisticsEntry ::= SEQUENCE {
|
|
-- ubiTrafficStatisticsStatus INTEGER,
|
|
-- ubiTrafficStatisticsHighThreshold Integer32,
|
|
-- ubiTrafficStatisticsLowThreshold Integer32,
|
|
-- ubiTrafficStatisticsAverageRate DisplayString,
|
|
-- ubiTrafficStatisticsAlarmCount Integer32,
|
|
-- ubiTrafficStatisticsLastAlarmTime DisplayString
|
|
-- }
|
|
--
|
|
-- ubiTrafficStatisticsStatus OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- normal(0),
|
|
-- alarmed(1)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "traffic status"
|
|
-- ::= { ubiTrafficStatisticsEntry 1 }
|
|
--
|
|
-- ubiTrafficStatisticsHighThreshold OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..1500000)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "high threshold"
|
|
-- ::= { ubiTrafficStatisticsEntry 2 }
|
|
--
|
|
-- ubiTrafficStatisticsLowThreshold OBJECT-TYPE
|
|
-- SYNTAX Integer32(1..1500000)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "low threshold"
|
|
-- ::= { ubiTrafficStatisticsEntry 3 }
|
|
--
|
|
-- ubiTrafficStatisticsAverageRate OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "average rate"
|
|
-- ::= { ubiTrafficStatisticsEntry 4 }
|
|
--
|
|
-- ubiTrafficStatisticsAlarmCount OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "alarm count"
|
|
-- ::= { ubiTrafficStatisticsEntry 5 }
|
|
--
|
|
-- ubiTrafficStatisticsLastAlarmTime OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "last alarm time"
|
|
-- ::= { ubiTrafficStatisticsEntry 6 }
|
|
--
|
|
|
|
-- ***********************************************************
|
|
-- ubiTrafficControlTable
|
|
-- ***********************************************************
|
|
|
|
ubiTrafficControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiTrafficControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table for traffic-control configuration"
|
|
::= { ubiTrafficControl 2 }
|
|
|
|
ubiTrafficControlEntry OBJECT-TYPE
|
|
SYNTAX UbiTrafficControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry representing traffic-control config.
|
|
Index description
|
|
a) ubiTrafficControlIfindex : interface index
|
|
b) ubiTrafficControlBaseType : base type of traffic
|
|
value - pps(1), kbps(2)
|
|
c) ubiTrafficControlTrafficType : type of traffic
|
|
value - all(1), unicast(2), broadcast(3), multicast(4)
|
|
d) ubiTrafficControlDirection : direction of traffic
|
|
value - inbound(1), outbound(2)"
|
|
INDEX
|
|
{
|
|
ubiTrafficControlIfindex,
|
|
ubiTrafficControlBaseType,
|
|
ubiTrafficControlType,
|
|
ubiTrafficControlDirection
|
|
}
|
|
::= { ubiTrafficControlTable 1 }
|
|
|
|
UbiTrafficControlEntry ::= SEQUENCE {
|
|
ubiTrafficControlIfindex Integer32,
|
|
ubiTrafficControlBaseType INTEGER,
|
|
ubiTrafficControlType INTEGER,
|
|
ubiTrafficControlDirection INTEGER,
|
|
ubiTrafficControlHighThreshold Integer32,
|
|
ubiTrafficControlLowThreshold Integer32,
|
|
ubiTrafficControlAction INTEGER,
|
|
ubiTrafficControlStatus INTEGER,
|
|
ubiTrafficControlAverageRate DisplayString,
|
|
ubiTrafficControlOneMinRate DisplayString,
|
|
ubiTrafficControlAlarmCount Integer32,
|
|
ubiTrafficControlLastAlarmTime DisplayString,
|
|
ubiTrafficControlRowStatus RowStatus
|
|
}
|
|
|
|
ubiTrafficControlIfindex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each interface.
|
|
It is recommended that values are assigned contiguously
|
|
starting from 1. The value for each interface sub-layer
|
|
must remain constant at least from one re-initialization of
|
|
the entity's network management system to the next re-initialization."
|
|
::= { ubiTrafficControlEntry 1 }
|
|
|
|
ubiTrafficControlBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pps(1),
|
|
kbps(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Base type of traffic."
|
|
::= { ubiTrafficControlEntry 2 }
|
|
|
|
ubiTrafficControlType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
all(1),
|
|
broadcast(2),
|
|
multicast(3),
|
|
unicast(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of traffic.
|
|
Type based on KBPS must be only all(0). remains are only for pps."
|
|
::= { ubiTrafficControlEntry 3 }
|
|
|
|
ubiTrafficControlDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inbound(1),
|
|
outbound(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Direction of traffic."
|
|
::= { ubiTrafficControlEntry 4 }
|
|
|
|
ubiTrafficControlHighThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(1..1500000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic high-threshold.
|
|
Type based on KBPS could has threshold less than 1000000."
|
|
::= { ubiTrafficControlEntry 5 }
|
|
|
|
ubiTrafficControlLowThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(1..1500000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic low-threshold.
|
|
Type based on KBPS could has threshold less than 1000000."
|
|
::= { ubiTrafficControlEntry 6 }
|
|
|
|
ubiTrafficControlAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
alarmOnly(1),
|
|
blockMode(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic action type."
|
|
::= { ubiTrafficControlEntry 7 }
|
|
|
|
ubiTrafficControlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
alarm(2),
|
|
block(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface's current status."
|
|
::= { ubiTrafficControlEntry 8 }
|
|
|
|
ubiTrafficControlAverageRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average rate of controlled traffic."
|
|
::= { ubiTrafficControlEntry 9 }
|
|
|
|
ubiTrafficControlOneMinRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate of controlled traffic per 1 minute."
|
|
::= { ubiTrafficControlEntry 10 }
|
|
|
|
ubiTrafficControlAlarmCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of alarmed times."
|
|
::= { ubiTrafficControlEntry 11 }
|
|
|
|
ubiTrafficControlLastAlarmTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last alarmed time"
|
|
::= { ubiTrafficControlEntry 12 }
|
|
|
|
|
|
ubiTrafficControlRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row Status"
|
|
::= { ubiTrafficControlEntry 13 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiClearTrafficControl
|
|
-- ***********************************************************
|
|
|
|
ubiClearTrafficControl OBJECT IDENTIFIER ::= { ubiTrafficControl 3 }
|
|
|
|
ubiClearTrafficControlInterface OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If value is 0, clear all interface.
|
|
If value is ifindex, clear specific interface (only physical interface)"
|
|
::= { ubiClearTrafficControl 1 }
|
|
|
|
ubiClearTrafficControlBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
pps(1),
|
|
kbps(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic-control base type.
|
|
'none' value means all base type."
|
|
::= { ubiClearTrafficControl 2 }
|
|
|
|
ubiClearTrafficControlType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
all(1),
|
|
unicast(2),
|
|
broadcast(3),
|
|
multicast(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic-control type.
|
|
Type based on KBPS must be all.
|
|
'none' value means all traffic type."
|
|
::= { ubiClearTrafficControl 3 }
|
|
|
|
ubiClearTrafficControlDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
inbound(1),
|
|
outbound(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic-control direction.
|
|
'none' value means all direction."
|
|
::= { ubiClearTrafficControl 4 }
|
|
|
|
ubiClearTrafficControlOperate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
excute(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"clear excute"
|
|
::= { ubiClearTrafficControl 5 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfClassStatsTable
|
|
-- ***********************************************************
|
|
|
|
ubiIfEgressQueueStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiIfEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the information for egress
|
|
queue statistics."
|
|
::= { ubiIfStatistics 1 }
|
|
|
|
|
|
ubiIfEgressQueueStatsEntry OBJECT-TYPE
|
|
SYNTAX UbiIfEgressQueueStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of the port that configure cos feild.
|
|
that port collects the pass and drop statistics
|
|
for egress queue."
|
|
INDEX { ifIndex, ubiIfEqStatsQueueId }
|
|
::= { ubiIfEgressQueueStatsTable 1 }
|
|
|
|
|
|
UbiIfEgressQueueStatsEntry ::= SEQUENCE
|
|
{
|
|
ubiIfEqStatsQueueId Integer32,
|
|
ubiIfEqStatsPassOctets Counter64,
|
|
ubiIfEqStatsDropOctets Counter64,
|
|
ubiIfEqStatsPassPkts Counter,
|
|
ubiIfEqStatsDropPkts Counter,
|
|
ubiIfEqStatsQueueDescr DisplayString
|
|
}
|
|
|
|
ubiIfEqStatsQueueId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The queue identifier."
|
|
::= { ubiIfEgressQueueStatsEntry 1 }
|
|
|
|
ubiIfEqStatsPassOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pass counter for bytes."
|
|
::= { ubiIfEgressQueueStatsEntry 2 }
|
|
|
|
ubiIfEqStatsDropOctets OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop counter for bytes."
|
|
::= { ubiIfEgressQueueStatsEntry 3 }
|
|
|
|
ubiIfEqStatsPassPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pass counter for packets."
|
|
::= { ubiIfEgressQueueStatsEntry 4 }
|
|
|
|
ubiIfEqStatsDropPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The drop counter for packets."
|
|
::= { ubiIfEgressQueueStatsEntry 5 }
|
|
|
|
ubiIfEqStatsQueueDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information
|
|
about the interface's each queue."
|
|
::= { ubiIfEgressQueueStatsEntry 6 }
|
|
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfStatsTable
|
|
-- ***********************************************************
|
|
|
|
ubiIfStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiIfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the statistics for physical port."
|
|
::= { ubiIfStatistics 2 }
|
|
|
|
ubiIfStatsEntry OBJECT-TYPE
|
|
SYNTAX UbiIfStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Entry contains the statistics of a particular
|
|
physical port."
|
|
INDEX { ifIndex }
|
|
::= { ubiIfStatsTable 1 }
|
|
|
|
|
|
UbiIfStatsEntry ::= SEQUENCE
|
|
{
|
|
ubiIfStatsInPkts Counter64,
|
|
ubiIfStatsOutPkts Counter64,
|
|
ubiIfStatsInCRCErrors Counter64,
|
|
ubiIfStatsCounterClear INTEGER,
|
|
ubiIfStatsSnmpClear INTEGER
|
|
}
|
|
|
|
ubiIfStatsInPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of input packets for a given
|
|
physical port."
|
|
::= { ubiIfStatsEntry 1 }
|
|
|
|
ubiIfStatsOutPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of output packets for a given
|
|
physical interface."
|
|
::= { ubiIfStatsEntry 2 }
|
|
|
|
ubiIfStatsInCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of input CRC errors for a given
|
|
interface."
|
|
::= { ubiIfStatsEntry 3 }
|
|
|
|
ubiIfStatsCounterClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initialize the counter"
|
|
::= { ubiIfStatsEntry 14 }
|
|
|
|
ubiIfStatsSnmpClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initialize the statistics in this table."
|
|
::= { ubiIfStatsEntry 15 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfTrafficRateTable
|
|
-- ***********************************************************
|
|
|
|
ubiTrafficRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiTrafficRateEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"traffic rate per interface"
|
|
::= { ubiIfStatistics 3 }
|
|
|
|
ubiTrafficRateEntry OBJECT-TYPE
|
|
SYNTAX UbiTrafficRateEntry
|
|
ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"traffic rate per interface"
|
|
INDEX { ifindex }
|
|
::= { ubiTrafficRateTable 1 }
|
|
|
|
UbiTrafficRateEntry ::= SEQUENCE {
|
|
ubiIfStatsInTrafficRate Counter64,
|
|
ubiIfStatsOutTrafficRate Counter64
|
|
}
|
|
|
|
ubiIfStatsInTrafficRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { ubiTrafficRateEntry 1 }
|
|
|
|
ubiIfStatsOutTrafficRate OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { ubiTrafficRateEntry 2 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiFlowControlTable
|
|
-- ***********************************************************
|
|
|
|
ubiFlowControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiFlowControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of flowcontrol information on physical ports."
|
|
::= { ubiPortControl 1 }
|
|
|
|
ubiFlowControlEntry OBJECT-TYPE
|
|
SYNTAX UbiFlowControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of flowcontrol information on physical port."
|
|
INDEX { ifIndex }
|
|
::= { ubiFlowControlTable 1 }
|
|
|
|
UbiFlowControlEntry ::= SEQUENCE
|
|
{
|
|
ubiFlowctrlReceive INTEGER,
|
|
ubiFlowctrlSend INTEGER,
|
|
ubiFlowctrlWatermark UbiFlowctrlWatermark
|
|
}
|
|
|
|
ubiFlowctrlReceive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"flowcontrol on receive."
|
|
::= { ubiFlowControlEntry 1 }
|
|
|
|
ubiFlowctrlSend OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"flowcontrol on send"
|
|
::= { ubiFlowControlEntry 2 }
|
|
|
|
ubiFlowctrlWatermark OBJECT-TYPE
|
|
SYNTAX UbiFlowctrlWatermark
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"flowcontrol watermark value"
|
|
::= { ubiFlowControlEntry 3 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiRateLimit
|
|
-- ***********************************************************
|
|
ubiRateLimit OBJECT IDENTIFIER ::= { ubiPortControl 2 }
|
|
|
|
ubiRateLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of rate-limit information on physical ports"
|
|
::= { ubiRateLimit 1 }
|
|
|
|
ubiRateLimitEntry OBJECT-TYPE
|
|
SYNTAX UbiRateLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of rate-limit information on physical port"
|
|
INDEX { ifIndex }
|
|
::= { ubiRateLimitTable 1 }
|
|
|
|
UbiRateLimitEntry ::= SEQUENCE
|
|
{
|
|
ubiEgressTrafficRate Integer32,
|
|
ubiEgressBucketSize Integer32,
|
|
ubiIngressLevel DisplayString
|
|
}
|
|
|
|
ubiEgressTrafficRate OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"egress traffic rate"
|
|
::= { ubiRateLimitEntry 1 }
|
|
|
|
ubiEgressBucketSize OBJECT-TYPE
|
|
SYNTAX Integer32(1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"egress bucket size"
|
|
::= { ubiRateLimitEntry 2 }
|
|
|
|
ubiIngressLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ingress level, range from 0.01 to 100.00"
|
|
::= { ubiRateLimitEntry 3 }
|
|
|
|
|
|
ubiRateLimitQueueEgressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiRateLimitQueueEgressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of rate-limit q-egress information on physical ports"
|
|
::= { ubiRateLimit 2 }
|
|
|
|
ubiRateLimitQueueEgressEntry OBJECT-TYPE
|
|
SYNTAX UbiRateLimitQueueEgressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of rate-limit q-egress information on physical port"
|
|
INDEX { ifIndex, ubiQueueId }
|
|
::= { ubiRateLimitQueueEgressTable 1 }
|
|
|
|
|
|
UbiRateLimitQueueEgressEntry ::= SEQUENCE
|
|
{
|
|
ubiQueueId Integer32,
|
|
ubiQueueEgressTrafficRate Integer32,
|
|
ubiQueueEgressBucketSize Integer32
|
|
}
|
|
|
|
ubiQueueId OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"queue id"
|
|
::= { ubiRateLimitQueueEgressEntry 1 }
|
|
|
|
ubiQueueEgressTrafficRate OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"q-egress traffic rate"
|
|
::= { ubiRateLimitQueueEgressEntry 2 }
|
|
|
|
ubiQueueEgressBucketSize OBJECT-TYPE
|
|
SYNTAX Integer32(1..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"q-egress bucket size"
|
|
::= { ubiRateLimitQueueEgressEntry 3 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiStormControlTable
|
|
-- ***********************************************************
|
|
|
|
ubiStormControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of storm-control information on physical ports"
|
|
::= { ubiPortControl 3 }
|
|
|
|
ubiStormControlEntry OBJECT-TYPE
|
|
SYNTAX UbiStormControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of storm-control information on physical port"
|
|
INDEX { ifIndex }
|
|
::= { ubiStormControlTable 1 }
|
|
|
|
UbiStormControlEntry ::= SEQUENCE
|
|
{
|
|
ubiBroadcastLevel DisplayString,
|
|
ubiMulticastLevel DisplayString,
|
|
ubiUnicastLevel DisplayString
|
|
}
|
|
|
|
ubiBroadcastLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"broadcast control level, range from 0.01 to 100.00"
|
|
::= { ubiStormControlEntry 1 }
|
|
|
|
ubiMulticastLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"multicast control level, range from 0.01 to 100.00"
|
|
::= { ubiStormControlEntry 2 }
|
|
|
|
ubiUnicastLevel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"unicast control level, range from 0.01 to 100.00"
|
|
::= { ubiStormControlEntry 3 }
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiStormControlStatisticsTable
|
|
-- ***********************************************************
|
|
|
|
ubiStormDiscardStats OBJECT IDENTIFIER ::= { ubiPortControl 4 }
|
|
|
|
ubiStormDiscardStatsClear OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
clear(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Initialize the counters for discarded packet by Storm-Control."
|
|
::= { ubiStormDiscardStats 1 }
|
|
|
|
ubiStormDiscardStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiStormDiscardStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the statistics of discarded packets by Storm-control on physical ports"
|
|
::= { ubiStormDiscardStats 2 }
|
|
|
|
ubiStormDiscardStatsEntry OBJECT-TYPE
|
|
SYNTAX UbiStormDiscardStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of storm-control discard statistics on physical port"
|
|
INDEX { ifIndex }
|
|
::= { ubiStormDiscardStatsTable 1 }
|
|
|
|
UbiStormDiscardStatsEntry ::= SEQUENCE
|
|
{
|
|
ubiStormUnicastDiscards Counter64,
|
|
ubiStormMulticastDiscards Counter64,
|
|
ubiStormBroadcastDiscards Counter64,
|
|
ubiStormTotalDiscards Counter64,
|
|
-- ubiStormStatsClear INTEGER
|
|
}
|
|
|
|
ubiStormUnicastDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of discarded Unicast packets by Storm-control for a given interface."
|
|
::= { ubiStormDiscardStatsEntry 1 }
|
|
|
|
ubiStormMulticastDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of discarded Multicast packets by Storm-control for a given interface."
|
|
::= { ubiStormDiscardStatsEntry 2 }
|
|
|
|
ubiStormBroadcastDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of discarded Broadcast packets by Storm-control for a given interface."
|
|
::= { ubiStormDiscardStatsEntry 3 }
|
|
|
|
ubiStormTotalDiscards OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Total number of discarded packets by Storm-control for a given interface."
|
|
::= { ubiStormDiscardStatsEntry 4 }
|
|
|
|
-- ubiStormStatsClear OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- none(0),
|
|
-- clear(1)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Initialize the counters for discarded packet by Storm-Control."
|
|
-- ::= { ubiStormControlStatsEntry 5 }
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfErpsTable
|
|
-- ***********************************************************
|
|
|
|
ubiIfErpsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UbiIfErpsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of ERPS information on interface."
|
|
::= { ubiIfErps 1 }
|
|
|
|
|
|
ubiIfErpsEntry OBJECT-TYPE
|
|
SYNTAX UbiIfErpsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of ERPS information on interface."
|
|
INDEX { ifIndex }
|
|
::= { ubiIfErpsTable 1 }
|
|
|
|
|
|
UbiIfErpsEntry ::= SEQUENCE
|
|
{
|
|
ubiIfErpsAggMinLink Integer32
|
|
}
|
|
|
|
ubiIfErpsAggMinLink OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minmum Link count to activate Port-channel in ERPS.
|
|
- To activate Port-channel, actived members of port-channel
|
|
must be minmum link count at least."
|
|
::= { ubiIfErpsEntry 1 }
|
|
|
|
|
|
|
|
-- ***********************************************************
|
|
-- ubiIfMIBConformance
|
|
-- ***********************************************************
|
|
ubiInterfaceMIBCompliances OBJECT IDENTIFIER ::= { ubiInterfaceMIBConformance 1 }
|
|
ubiInterfaceMIBGroups OBJECT IDENTIFIER ::= { ubiInterfaceMIBConformance 2 }
|
|
-- Compliance
|
|
|
|
ubiInterfaceMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which
|
|
implement the UBQS-INTERFACE-MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ubiPortGroup,
|
|
ubiIfStatsGroup,
|
|
ubiSwitchportGroup,
|
|
ubiTrafficMonitoringGroup,
|
|
ubiExtIfStatsGroup,
|
|
}
|
|
::= { ubiInterfaceMIBCompliances 1 }
|
|
|
|
|
|
ubiPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ubiLinkUpDownEnable,
|
|
ubiPortMediaDescr,
|
|
ubiPortGBICState,
|
|
ubiPortGBICType,
|
|
ubiPortDuplex,
|
|
ubiPortMtu
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects containing
|
|
information about physical port."
|
|
::= { ubiInterfaceMIBGroups 1 }
|
|
|
|
|
|
ubiIfStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ubiIfStatsInPkts,
|
|
ubiIfStatsOutPkts,
|
|
ubiIfStatsInCRCErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects containing packet
|
|
statistics for a given port."
|
|
::= { ubiInterfaceMIBGroups 2 }
|
|
|
|
ubiSwitchportGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ubiPortL2L3IfState,
|
|
ubiSwitchportName,
|
|
ubiSwitchportMode,
|
|
ubiSwitchportBridgeId,
|
|
ubiSwitchportVlanNative,
|
|
ubiSwitchportVlanDefault,
|
|
ubiSwitchportVlanTaggedSet,
|
|
ubiSwitchportVlanUntaggedSet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects containing
|
|
the switchport information."
|
|
::= { ubiInterfaceMIBGroups 3 }
|
|
|
|
END
|