mibs/MIBS/watchguard/WATCHGUARD-HA-MIB
2023-12-05 12:25:34 +01:00

373 lines
13 KiB
Plaintext

WATCHGUARD-HA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter64, Gauge32,
OBJECT-IDENTITY, enterprises,
IpAddress, TimeTicks FROM SNMPv2-SMI
DateAndTime FROM SNMPv2-TC
watchguard FROM WATCHGUARD-MIB;
wgInfoModule MODULE-IDENTITY
LAST-UPDATED "200701251200Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" Ella Yu
WatchGuard Technologies, Inc.
1841 Zanker Road
San Jose, CA 95112
USA
408-519-4888
ella.yu@watchguard.com "
DESCRIPTION
"The MIB module describes general information
of WatchGuard system. Mainly, the information
obtained from this MIB is used by wgInfoSystemMIB,
wgClientMIB, wgSystemStatisticsMIB, wgIpsecTunnelMIB,
wgHAMIB."
REVISION "200701251200Z"
DESCRIPTION
"Initial revision."
::= { watchguard 6 }
wgHAMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all HA related
branches."
::= { wgInfoModule 6 }
wgHALocal OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all objects which are
belong to local appliance."
::= { wgHAMIB 1 }
wgHAPeer OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all objects which are
belong to peer appliance."
::= { wgHAMIB 2 }
wgHAStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
unknown(1),
as-primary-active(2),
as-secondary-active(3),
aa-primary-ative(4),
aa-secondary-active(5),
aa-primary-takeover(6),
aa-secondary-takeover(7),
standby(8),
admin(9),
failed(10),
unavailable(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current status of local appliance.
disabled: The local appliance of HA system is not enabled.
unknown: The local appliance of HA system is in initialization
as-primary-active: The local appliance that is the primary appliance of
HA/AS system is in active mode. This status is also called
MASTER in some systems.
as-secondary-active: The local appliance that is the secondary appliance of
HA/AS system is in active mode. This status is also called
BACKUP in some systems.
aa-primary-ative: The local appliance that is the primary appliance of
HA/AA system is in active mode.
aa-secondary-active: The local appliance that is the secondary appliance of
HA/AA system is in active mode.
aa-primary-takeover: The local appliance that is the primary appliance of
HA/AA system has taken over the peer's duty.
aa-secondary-takeover: The local appliance of the secondary appliance of
HA/AA system has taken over the peer's duty.
standby: The local appliance of HA/AS system is in standby mode.
admin: The local appliance of HA system detects an mismatched
configuration and waits for system administrator to reslove
the conflict.
failed: The local appliance of the HA system is down due to forced failover
or other reasons.
unavailable: It's reported when local appliance of HA system is unabled
to get status information.
"
::= { wgHALocal 1 }
wgHAPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
unavailable(0),
active(1),
standby(2),
admin(3),
failed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates current status of peer appliance.
unavailable: It's reported when peer appliance of HA system is unabled
to get status information.
active: The peer applicance of HA system is in active mode.
standby: The peer applicance of HA system is in standby mode.
admin: The peer applicance of HA system dectects an mismatched
configuration and waits for system administrator to reslove the conflict.
failed: The peer appliance of HA system is down due to forced failover or other reasons.
"
::= {wgHALocal 2 }
wgHALastDBSyncTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last DB synchronized time of local appliance."
::= { wgHALocal 3 }
wgHAError OBJECT-TYPE
SYNTAX INTEGER {
no-error(0),
mismatched-ha-id(1),
mismatched-software(2),
mismatched-database(3),
mismatched-hardware(4),
forced-fail(5),
invalid-ha-role(6),
link-down(7),
lost-mia-heartbeat(8),
mia-not-responding(9),
admin-command-failed(10),
detect-ha-error(11),
unavailable(12),
hotsync-failed(13),
config-sync-failed(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the current error that occurred in local appliance ."
::= { wgHALocal 4 }
wgHAPeerError OBJECT-TYPE
SYNTAX INTEGER {
no-error(0),
mismatched-ha-id(1),
mismatched-software(2),
mismatched-database(3),
mismatched-hardware(4),
forced-fail(5),
invalid-ha-role(6),
link-down(7),
lost-mia-heartbeat(8),
mia-not-responding(9),
admin-command-failed(10),
detect-ha-error(11),
unavailable(12),
hotsync-failed(13),
config-sync-failed(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the current error that occurred in peer appliance."
::= { wgHALocal 5 }
wgHAPeerSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of peer appliance."
::= { wgHAPeer 1 }
wgHAPeerLastDBSyncTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last DB synchronized time of peer appliance."
::= { wgHAPeer 2}
wgHAPeerDevice OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object for parameters and configuration
data of devices in this entity."
::= { wgHAPeer 3 }
wgHAPeerCounters OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object for parameters and configuration
data of devices in this entity."
::= { wgHAPeer 4 }
wgHAPeerIfNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RapidCard installed in this entity."
::= { wgHAPeerDevice 1 }
wgHAPeerIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WGHAPeerIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of RapidCard entries. The number of
entries is given by the value of wgHAPeerDeviceNumber."
::= { wgHAPeerDevice 2 }
wgHAPeerIfEntry OBJECT-TYPE
SYNTAX WGHAPeerIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A RapidCard entry containing objects for a
particular RapidCard."
INDEX { wgHAPeerIfIndex }
::= { wgHAPeerIfTable 1 }
WGHAPeerIfEntry ::= SEQUENCE {
wgHAPeerIfIndex Unsigned32,
wgHAPeerIfIpAddr IpAddress,
wgHAPeerIfLinkStatus INTEGER
}
wgHAPeerIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique value for each interface."
::= { wgHAPeerIfEntry 1 }
wgHAPeerIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of the interface."
::= { wgHAPeerIfEntry 4 }
wgHAPeerIfLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
other(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the interface."
::= { wgHAPeerIfEntry 9 }
wgHAPeerSystemCpuUtil OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization of the peer system in last 5
seconds."
::= { wgHAPeerCounters 1 }
wgHAPeerSystemTotalSendBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes sent since peer system
is up."
::= { wgHAPeerCounters 2 }
wgHAPeerSystemTotalRecvBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received since peer system
is up."
::= { wgHAPeerCounters 3 }
wgHAPeerSystemTotalSendPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets sent since peer system is
up."
::= { wgHAPeerCounters 4 }
wgHAPeerSystemTotalRecvPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received since peer
system is up."
::= { wgHAPeerCounters 5 }
wgHAPeerSystemStreamReqTotal OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the connection requests since
system is up."
::= { wgHAPeerCounters 6 }
wgHAPeerSystemStreamReqDrop OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the connection requests being
dropped since system is up."
::= { wgHAPeerCounters 7 }
wgHAPeerSystemCurrIpsecTunnels OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ipsec tunnels in the peer system
currently."
::= {wgHAPeerCounters 8 }
wgHAPeerSystemCpuUtil1 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization of the peer system in last 1
minute."
::= { wgHAPeerCounters 9 }
wgHAPeerSystemCpuUtil5 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization of the peer system in last 5
minutes."
::= { wgHAPeerCounters 10 }
wgHAPeerSystemCpuUtil15 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization of the peer system in last 15
minutes."
::= { wgHAPeerCounters 11 }
END