1339 lines
36 KiB
Plaintext
1339 lines
36 KiB
Plaintext
--
|
|
-- $Id: zyxel-prestige.mib version 1.00 2001/10/05
|
|
--
|
|
|
|
-- Copyright (C) 1994 - 2001 Zyxel Communications, Inc.
|
|
-- All Rights Reserved.
|
|
--
|
|
-- Stagecoach Confidential; Need to Know only.
|
|
-- Protected as an unpublished work.
|
|
--
|
|
-- The computer program listings, specifications and documentation
|
|
-- herein are the property of Stagecoach Communications, Inc. and
|
|
-- shall not be reproduced, copied, disclosed, or used in whole or
|
|
-- in part for any reason without the prior express written permission of
|
|
-- Stagecoach Communications, Inc.
|
|
|
|
-- ZyXEL Communications Corporation
|
|
-- Private Enterprise MIB definition
|
|
|
|
ZYXEL-PRESTIGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, Counter, Gauge, IpAddress,
|
|
NetworkAddress, TimeTicks
|
|
FROM RFC1155-SMI
|
|
ifIndex, ipRouteDest, ipAdEntAddr, egpNeighAddr
|
|
FROM RFC1213-MIB
|
|
atportIndex
|
|
FROM APPLETALK-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
prestigeCommon
|
|
FROM ZYXEL-MIB;
|
|
|
|
|
|
-- PRESTIGE common managed objects
|
|
prestigeSystem OBJECT IDENTIFIER ::= { prestigeCommon 1 }
|
|
prestigeDynDns OBJECT IDENTIFIER ::= { prestigeCommon 2 }
|
|
prestigeLAN OBJECT IDENTIFIER ::= { prestigeCommon 3 }
|
|
prestigeStaticRoute OBJECT IDENTIFIER ::= { prestigeCommon 4 }
|
|
prestigeFilterConfig OBJECT IDENTIFIER ::= { prestigeCommon 5 }
|
|
prestigeXDSL OBJECT IDENTIFIER ::= { prestigeCommon 6 }
|
|
prestigeTraps OBJECT IDENTIFIER ::= { prestigeCommon 99 }
|
|
|
|
|
|
|
|
-- The system group
|
|
sysRasFWVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current ras firmware version, N/A means information
|
|
not available."
|
|
::= { prestigeSystem 1 }
|
|
|
|
sysHWVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current hardware version, N/A means information
|
|
not available."
|
|
::= { prestigeSystem 2 }
|
|
|
|
sysModemVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current modem code version, N/A means information
|
|
not available."
|
|
::= { prestigeSystem 3 }
|
|
|
|
sysSysName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Choose a descriptive name for identification purposes.
|
|
This name can be up to 30 alphanumeric characters long.
|
|
Spaces are not allowed, but dashes '-' and underscores
|
|
'_' are accepted."
|
|
::= { prestigeSystem 4 }
|
|
|
|
sysLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The geographic location (up to 30 characters) of your
|
|
Prestige."
|
|
::= { prestigeSystem 5 }
|
|
|
|
sysConatctPersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name (up to 30 characters) of the person in charge
|
|
of this Prestige."
|
|
::= { prestigeSystem 6 }
|
|
|
|
sysProtocolRouteIp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this object to Yes to enable IP routing. You must
|
|
enable IP routing for Internet access."
|
|
::= { prestigeSystem 7 }
|
|
|
|
sysProtocolBridge OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Turn on/off bridging for protocols not supported (e.g.,
|
|
SNA) or not turned on in the previous Route fields."
|
|
::= { prestigeSystem 8 }
|
|
|
|
|
|
sysDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The domain name of the LAN. If this object is empty,
|
|
the ISP may assign a domain name via DHCP."
|
|
::= { prestigeSystem 9 }
|
|
|
|
sysReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If yes reset prestige."
|
|
::= { prestigeSystem 10 }
|
|
|
|
-- The DynDns group
|
|
-- Dynamic DNS allows you to update your current dynamic
|
|
-- IP address with one or many dynamic DNS services so
|
|
-- that any one can conatct you (in NetMeeting, CU-SeeMe,
|
|
-- etc.) or access your FTP server or Web site on your own
|
|
-- computer using a DNS-like address (e.g. myhost.dnynds.org
|
|
-- where myhost is a name of your choice) which will never
|
|
-- change instead of using your IP address that changes each
|
|
-- time you reconnect.
|
|
|
|
ddnsActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the Dynamic DNS service."
|
|
::= { prestigeDynDns 1 }
|
|
|
|
ddnsServiceProvider OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dyndns(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The choice of your dynamic DNS client."
|
|
::= { prestigeDynDns 2 }
|
|
|
|
ddnsHost OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The domain name assigned to your prestige by
|
|
your Dyanmic DNS provider."
|
|
::= { prestigeDynDns 3 }
|
|
|
|
ddnsEmail OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Your e-mail address."
|
|
::= { prestigeDynDns 4 }
|
|
|
|
ddnsUser OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user name assigned to you."
|
|
::= { prestigeDynDns 5 }
|
|
|
|
ddnsPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..29))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The password assigned to you."
|
|
::= { prestigeDynDns 6 }
|
|
|
|
ddnsEnableWildcard OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabling the wildcard feature for your host
|
|
causes *.yourhost.dyndns.org to be aliased to
|
|
the same IP address as yourhost.dyndns.org.
|
|
This feature is useful if you want to be able
|
|
to use for example www.yourhost.dyndns.org
|
|
and still reach your hostname."
|
|
::= { prestigeDynDns 7 }
|
|
|
|
|
|
-- the LAN group
|
|
lanFilter OBJECT IDENTIFIER ::= { prestigeLAN 1 }
|
|
lanDHCP OBJECT IDENTIFIER ::= { prestigeLAN 2 }
|
|
lanTcpIp OBJECT IDENTIFIER ::= { prestigeLAN 3 }
|
|
lanWireless OBJECT IDENTIFIER ::= { prestigeLAN 4 }
|
|
|
|
-- the LAN filter group
|
|
-- This group allows you to specify filter set(s) that you
|
|
-- wish to apply to the Ethernet traffic. You seldom need to
|
|
-- filter Ethernet traffic; however, the filter sets may be
|
|
-- useful to block certain packets, reduce traffic and
|
|
-- prevent security breaches.
|
|
|
|
-- If you need to define filters, please read the Filter Config Group
|
|
-- description first, then return to this group to define the filter sets.
|
|
|
|
inProtocolFilterSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specified the protocol filter set for
|
|
incoming ethernet traffic."
|
|
::= { lanFilter 1 }
|
|
|
|
inDeviceFilterSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specified the device filter set for
|
|
incoming ethernet traffic."
|
|
::= { lanFilter 2 }
|
|
|
|
outProtocolFilterSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specified the protocol filter set for
|
|
outgoing ethernet traffic."
|
|
::= { lanFilter 3 }
|
|
|
|
outDeviceFilterSet OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specified the device filter set for
|
|
outgoing ethernet traffic."
|
|
::= { lanFilter 4 }
|
|
|
|
|
|
-- the LAN DHCP group
|
|
-- DHCP (Dynamic Host Configuration Protocol) allows the
|
|
-- individual clients (workstations) to obtain the TCP/IP
|
|
-- configuration at start-up from a centralized DHCP server.
|
|
-- The Prestige has built-in DHCP server capability,
|
|
-- enabled by default, which means it can assign IP
|
|
-- addresses, an IP default gateway and DNS servers to
|
|
-- Windows 95, Windows NT and other systems that support
|
|
-- the DHCP client. The Prestige can also act as a surrogate
|
|
-- DHCP server where it relays IP address assignment from
|
|
-- the actual DHCP server to the clients.
|
|
|
|
-- IP Pool Setup
|
|
-- The Prestige is pre-configured with a pool of 32 IP addresses
|
|
-- starting from 192.168.1.33 to 192.168.1.64 for the client
|
|
-- machines. This leaves 31 IP addresses, 192.168.1.2 to
|
|
-- 192.168.1.32 (excluding the Prestige itself which has a
|
|
-- default IP of 192.168.1.1) for other server machines, e.g.,
|
|
-- server for mail, FTP, telnet, web, etc., that you may have.
|
|
|
|
dhcpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
server(2),
|
|
relay(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If it is set to Server, your Prestige can assign
|
|
IP addresses, an IP default gateway and DNS servers
|
|
to Windows 95, Windows NT and other systems that
|
|
support the DHCP client. If set to None, the DHCP
|
|
server will be disabled. If set to Relay, the
|
|
Prestige acts as a surrogate DHCP server and relays
|
|
DHCP requests and responses between the remote
|
|
server and the clients. Enter the IP address of the
|
|
actual, remote DHCP server in the Remote DHCP
|
|
Server in this case."
|
|
::= { lanDHCP 1 }
|
|
|
|
|
|
dhcpStartIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the first of the contiguous
|
|
addresses in the IP address pool."
|
|
::= { lanDHCP 2 }
|
|
|
|
dhcpPoolSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the size, or count, of the IP
|
|
address pool."
|
|
::= { lanDHCP 3 }
|
|
|
|
dhcpPrimaryDnsServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DNS server addresses that you enter in this
|
|
object are passed to the client machines along
|
|
with the assigned IP address and subnet mask."
|
|
::= { lanDHCP 4 }
|
|
|
|
dhcpSecondaryDnsServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The DNS server addresses that you enter in this
|
|
object are passed to the client machines along
|
|
with the assigned IP address and subnet mask."
|
|
::= { lanDHCP 5 }
|
|
|
|
|
|
dhcpRemoteDhcpServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If Relay is selected in the dhcpStatus pbject above,
|
|
then this object should be the IP address of the
|
|
actual, remote DHCP server."
|
|
::= { lanDHCP 6 }
|
|
|
|
|
|
-- the LAN TCP/IP group
|
|
lanIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"IP address of your Prestige in dotted decimal notation"
|
|
::= { lanTcpIp 1 }
|
|
|
|
lanIpSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask specifies the network number
|
|
portion of the LAN IP address."
|
|
::= { lanTcpIp 2 }
|
|
|
|
lanIpRipDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
both(2),
|
|
in(3),
|
|
out(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RIP (Routing Information Protocol) allows a router
|
|
to exchange routing information with other routers.
|
|
This object controls the sending and receiving of
|
|
RIP packets. When set to Both, the Prestige will
|
|
broadcast its routing table periodically and
|
|
incorporate the RIP information that it receives;
|
|
when set to None, it will not send any RIP packets
|
|
and will ignore any RIP packets received."
|
|
::= { lanTcpIp 3 }
|
|
|
|
lanIpRipVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ohter(1), -- none of the following
|
|
rip1(2),
|
|
rip2B(3),
|
|
rip2M(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object controls the format and the broadcasting
|
|
method of the RIP packets that the Prestige sends (it
|
|
recognizes both formats when receiving). RIP-1 is
|
|
universally supported; but RIP-2 carries more
|
|
information. RIP-1 is probably adequate for most
|
|
networks, unless you have a unusual network topology.
|
|
Both RIP-2B and RIP-2M sends the routing data in
|
|
RIP-2 format; the difference being that RIP-2B uses
|
|
subnet broadcasting while RIP-2M uses multicasting."
|
|
::= { lanTcpIp 4 }
|
|
|
|
lanIpMulticast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
igmpv1(2),
|
|
igmpv2(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Prestige supports both IGMP version 1 (IGMP-v1)
|
|
and version 2 (IGMP-v2). At start up, the Prestige
|
|
queries all directly connected networks to gather
|
|
group membership. After that, the Prestige periodically
|
|
updates this information. Select None to disable IP
|
|
Multicasting."
|
|
::= { lanTcpIp 5 }
|
|
|
|
-- the Wireless LAN group
|
|
-- the Wireless LAN table
|
|
wlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LanWirelessEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of ip static route entries."
|
|
::= { lanWireless 1 }
|
|
|
|
wlanEntry OBJECT-TYPE
|
|
SYNTAX LanWirelessEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An wireless lan entry containing comment
|
|
object for a particular ESS."
|
|
INDEX { wlanCardID, wlanESSID}
|
|
::= { wlanTable 1 }
|
|
|
|
LanWirelessEntry ::=
|
|
SEQUENCE {
|
|
wlanEssStatus
|
|
INTEGER,
|
|
wlanCardID
|
|
INTEGER,
|
|
wlanESSID
|
|
DisplayString,
|
|
wlanHideESSID
|
|
INTEGER,
|
|
wlanChannelID
|
|
INTEGER,
|
|
wlanRTSThreshold
|
|
INTEGER,
|
|
wlanFragThreshold
|
|
INTEGER,
|
|
wlanWEPStatus
|
|
INTEGER,
|
|
wlanDefaultKey
|
|
INTEGER,
|
|
wlanWepKey1
|
|
DisplayString,
|
|
wlanWepKey2
|
|
DisplayString,
|
|
wlanWepKey3
|
|
DisplayString,
|
|
wlanWepKey4
|
|
DisplayString
|
|
}
|
|
|
|
wlanEssStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
active(2),
|
|
inactive(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object allows you to activate/deactivate this
|
|
ESS."
|
|
::= { wlanEntry 1 }
|
|
|
|
wlanCardID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Card ID indicates the wireless lan card number."
|
|
::= { wlanEntry 2 }
|
|
|
|
wlanESSID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ESSID(Extended Service Set Identification) is a
|
|
unique name to identify the Prestige in the wireless LAN.
|
|
Wireless clients associating to the Prestige must have
|
|
the same ESSID. "
|
|
::= { wlanEntry 3 }
|
|
|
|
wlanHideESSID OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Select Yes to hide the ESSID in so a station can not obtain
|
|
the ESSID through passive scanning. Select No to make the
|
|
ESSID visible so a station can obtain the ESSID through
|
|
passive scanning. "
|
|
::= { wlanEntry 4 }
|
|
|
|
wlanChannelID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The range of radio frequencies used by IEEE 802.11b wireless
|
|
devices is called a channel."
|
|
::= { wlanEntry 5 }
|
|
|
|
wlanRTSThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Select this option to enable RTS/CTS handshake. Data with its
|
|
rame size larger than this value will perform the RTS/CTS handshake.
|
|
Setting this attribute to be larger than the maximum MSDU
|
|
(MAC service data unit) size turns off the RTS/CTS handshake.
|
|
Setting this attribute to zero turns on the RTS/CTS handshake. "
|
|
::= { wlanEntry 6 }
|
|
|
|
wlanFragThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The threshold (number of bytes) for the fragmentation boundary for
|
|
directed messages. It is the maximum data fragment size that can be sent."
|
|
::= { wlanEntry 7 }
|
|
|
|
wlanWEPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disable(2),
|
|
WEP-64-bit(3),
|
|
WEP-128-bit(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WEP (Wired Equivalent Privacy) encrypts data frames before transmitting
|
|
over the wireless network. Select Disable allows all wireless computers
|
|
to communicate with the access points without any data encryption.
|
|
Select 64-bit WEP or 128-bit WEP to allow data encryption. "
|
|
::= { wlanEntry 8 }
|
|
|
|
wlanDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default transmit WEP key."
|
|
::= { wlanEntry 9 }
|
|
|
|
wlanWepKey1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..26))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WEP key #1 value for WEP encryption. If you chose WepKey-64-bit,
|
|
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
|
|
If you chose WepKey-128-bit, then enter 26 hexadecimal
|
|
digits ('0-9', 'AF') or 10 ASCII characters. "
|
|
::= { wlanEntry 10 }
|
|
|
|
wlanWepKey2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..26))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WEP key #2 value for WEP encryption. If you chose WepKey-64-bit,
|
|
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
|
|
If you chose WepKey-128-bit, then enter 26 hexadecimal
|
|
digits ('0-9', 'AF') or 10 ASCII characters. "
|
|
::= { wlanEntry 11 }
|
|
|
|
wlanWepKey3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..26))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WEP key #3 value for WEP encryption.If you chose WepKey-64-bit,
|
|
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
|
|
If you chose WepKey-128-bit, then enter 26 hexadecimal
|
|
digits ('0-9', 'AF') or 10 ASCII characters. "
|
|
::= { wlanEntry 12 }
|
|
|
|
wlanWepKey4 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..26))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WEP key #4 value for WEP encryption. If you chose WepKey-64-bit,
|
|
then enter any 10 hexadecimal digits ('0-9', 'A-F') or 5 ASCII characters.
|
|
If you chose WepKey-128-bit, then enter 26 hexadecimal
|
|
digits ('0-9', 'AF') or 10 ASCII characters. "
|
|
::= { wlanEntry 13 }
|
|
|
|
|
|
|
|
|
|
-- the static route group
|
|
-- Static routes tell the Prestige routing information that it
|
|
-- cannot learn automatically through other means. This can
|
|
-- arise in cases where RIP is disabled on the LAN or a remote
|
|
-- network is beyond the one that is directly connected to a
|
|
-- remote node. Each remote node specifies only the network to
|
|
-- which the gateway is directly connected and the Prestige
|
|
-- has no knowledge of the networks beyond it. The static
|
|
-- routes are for you to tell the Prestige about the networks
|
|
-- beyond the remote nodes.
|
|
|
|
-- the IP static route group
|
|
-- the IP static table
|
|
ipStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpStaticRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of ip static route entries."
|
|
::= { prestigeStaticRoute 1 }
|
|
|
|
ipStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX IpStaticRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ip static route entry containing comment object for a
|
|
particular ip static route."
|
|
INDEX { ipStaticRouteIndex }
|
|
::= { ipStaticRouteTable 1 }
|
|
|
|
IpStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
ipStaticRouteIndex
|
|
INTEGER,
|
|
ipStaticRouteName
|
|
DisplayString,
|
|
ipStaticRouteActiveStatus
|
|
INTEGER,
|
|
ipStaticRouteDestIpAddr
|
|
IpAddress,
|
|
ipStaticRouteSubnetMask
|
|
IpAddress,
|
|
ipStaticRouteGatewayIpAddr
|
|
IpAddress,
|
|
ipStaticRouteMetric
|
|
INTEGER,
|
|
ipStaticRoutePirvate
|
|
INTEGER
|
|
}
|
|
ipStaticRouteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of ip static route entry."
|
|
::= { ipStaticRouteEntry 1 }
|
|
|
|
ipStaticRouteName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The descriptive name for this route. This is for
|
|
identification purpose only."
|
|
::= { ipStaticRouteEntry 2 }
|
|
|
|
ipStaticRouteActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object allows you to activate/deactivate this
|
|
static route."
|
|
::= { ipStaticRouteEntry 3 }
|
|
|
|
ipStaticRouteDestIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the IP network address of the
|
|
final destination. Routing is always based on network
|
|
number. If you need to specify a route to a single
|
|
host, use a subnet mask of 255.255.255.255 in the
|
|
ipStaticRouteSubnetMask object to force the network
|
|
number to be identical to the host ID."
|
|
::= { ipStaticRouteEntry 4 }
|
|
|
|
ipStaticRouteSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask specifies the network number
|
|
portion of the ipStaticRouteDestIpAddr."
|
|
::= { ipStaticRouteEntry 5 }
|
|
|
|
ipStaticRouteGatewayIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The gateway is an immediate neighbor of your Prestige
|
|
that will forward the packet to the destination. On
|
|
the LAN, the gateway must be a router on the same
|
|
segment as your Prestige; over WAN, the gateway must
|
|
be the IP address of one of the remote nodes."
|
|
::= { ipStaticRouteEntry 6 }
|
|
|
|
ipStaticRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Metric represents the 'cost' of transmission for
|
|
routing purposes. IP routing uses hop count as
|
|
the measurement of cost, with a minimum of 1 for
|
|
directly connected networks. Enter a number that
|
|
approximates the cost for this link. The number
|
|
need not be precise, but it must be between 1 and
|
|
15. In practice, 2 or 3 is usually a good number."
|
|
::= { ipStaticRouteEntry 7 }
|
|
|
|
ipStaticRoutePirvate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This parameter determines if the Prestige will
|
|
include the route to this remote node in its RIP
|
|
broadcasts. If set to Yes, this route is kept
|
|
private and is not included in RIP broadcast.
|
|
If No, the route to this remote node will be
|
|
propagated to other hosts through RIP broadcasts."
|
|
::= { ipStaticRouteEntry 8 }
|
|
|
|
|
|
-- the Bridge static route group
|
|
-- Similar to network layer static routes, a bridging static
|
|
-- route tells the Prestige the route to a node before a
|
|
-- connection is established.
|
|
|
|
-- the Bridge static table
|
|
bridgeStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BridgeStaticRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of bridge static route entries."
|
|
::= { prestigeStaticRoute 2 }
|
|
|
|
bridgeStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX BridgeStaticRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An bridge static route entry containing comment
|
|
object for a particular bridge static route."
|
|
INDEX { bridgeStaticRouteIndex }
|
|
::= { bridgeStaticRouteTable 1 }
|
|
|
|
BridgeStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
bridgeStaticRouteIndex
|
|
INTEGER,
|
|
bridgeStaticRouteName
|
|
DisplayString,
|
|
bridgeStaticRouteActiveStatus
|
|
INTEGER,
|
|
bridgeStaticRouteEtherAddr
|
|
PhysAddress,
|
|
bridgeStaticRouteIpAddr
|
|
IpAddress,
|
|
bridgeStaticRouteGatewayNode
|
|
INTEGER
|
|
}
|
|
|
|
bridgeStaticRouteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of bridge static route entry."
|
|
::= { bridgeStaticRouteEntry 1 }
|
|
|
|
bridgeStaticRouteName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The descriptive name for this route. This is for
|
|
identification purpose only."
|
|
::= { bridgeStaticRouteEntry 2 }
|
|
|
|
bridgeStaticRouteActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object allows you to activate/deactivate this
|
|
static route."
|
|
::= { bridgeStaticRouteEntry 3 }
|
|
|
|
bridgeStaticRouteEtherAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the the MAC address of the
|
|
destination machine that you wish to bridge the
|
|
packets to."
|
|
::= { bridgeStaticRouteEntry 4 }
|
|
|
|
bridgeStaticRouteIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If available, this object specifies the IP address
|
|
of the destination machine that you wish to bridge
|
|
the packets to."
|
|
::= { bridgeStaticRouteEntry 5 }
|
|
|
|
bridgeStaticRouteGatewayNode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies the number of the remote node
|
|
that is the gateway of this static route."
|
|
::= { bridgeStaticRouteEntry 6 }
|
|
|
|
|
|
-- the filter config group
|
|
-- Your Prestige uses filters to decide whether or not to allow
|
|
-- passage of a packet. Data filters are divided into incoming
|
|
-- and outgoing filters, depending on the direction of the
|
|
-- packet relative to a port. These filters are further
|
|
-- subdivided into device and protocol filters.
|
|
|
|
-- the filter set table
|
|
filterSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FilterSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of filter set entries. The number of
|
|
entries is 12"
|
|
::= { prestigeFilterConfig 1 }
|
|
|
|
filterSetEntry OBJECT-TYPE
|
|
SYNTAX FilterSetEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An filter set entry containing comment object for a
|
|
particular filter set."
|
|
INDEX { filterSetIndex }
|
|
::= { filterSetTable 1 }
|
|
|
|
FilterSetEntry ::=
|
|
SEQUENCE {
|
|
filterSetIndex
|
|
INTEGER,
|
|
filterSetComment
|
|
DisplayString
|
|
}
|
|
|
|
filterSetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of filter set."
|
|
::= { filterSetEntry 1 }
|
|
|
|
filterSetComment OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The descriptive name or comment of filter set"
|
|
::= { filterSetEntry 2 }
|
|
|
|
|
|
-- the filter rule table
|
|
filterRuleTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FilterRuleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of filter rule entries. The number of
|
|
entries is (number of filter set) *
|
|
(number of rule set per filter set)"
|
|
::= { prestigeFilterConfig 2 }
|
|
|
|
filterRuleEntry OBJECT-TYPE
|
|
SYNTAX FilterRuleEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An filter rule entry containing TCP/IP and/or generic
|
|
filter rules for a particular filter set."
|
|
INDEX { filterSetIndex, filterRuleIndex }
|
|
::= { filterRuleTable 1 }
|
|
|
|
FilterRuleEntry ::=
|
|
SEQUENCE {
|
|
filterRuleIndex
|
|
INTEGER,
|
|
filterRuleActiveStatus
|
|
INTEGER,
|
|
filterRuleType
|
|
INTEGER,
|
|
filterRuleIpProtocol
|
|
INTEGER,
|
|
filterRuleIpSourceRoute
|
|
INTEGER,
|
|
filterRuleDestIpAddr
|
|
IpAddress,
|
|
filterRuleDestIpMask
|
|
IpAddress,
|
|
filterRuleDestPort
|
|
INTEGER,
|
|
filterRuleDestPortComp
|
|
INTEGER,
|
|
filterRuleSourceIpAddr
|
|
IpAddress,
|
|
filterRuleSourceIpMask
|
|
IpAddress,
|
|
filterRuleSourcePort
|
|
INTEGER,
|
|
filterRuleSourcePortComp
|
|
INTEGER,
|
|
filterRuleTcpEstab
|
|
INTEGER,
|
|
filterRuleGenericOffset
|
|
INTEGER,
|
|
filterRuleGenericLength
|
|
INTEGER,
|
|
filterRuleGenericMask
|
|
OCTET STRING,
|
|
filterRuleGenericValue
|
|
OCTET STRING,
|
|
filterRuleMore
|
|
INTEGER,
|
|
filterRuleLog
|
|
INTEGER,
|
|
filterRuleActMatched
|
|
INTEGER,
|
|
filterRuleActNotMatched
|
|
INTEGER
|
|
}
|
|
|
|
filterRuleIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of rule set."
|
|
::= { filterRuleEntry 1 }
|
|
|
|
filterRuleActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object activates/deactivates the filter rule."
|
|
::= { filterRuleEntry 2 }
|
|
|
|
filterRuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
tcpIp(2),
|
|
generic(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"There are two types of filter rules: TCP/IP and Generic.
|
|
TCP/IP rules allow you to base the rule on the fields in
|
|
the IP and the upper layer protocol, e.g., UDP and TCP,
|
|
headers.
|
|
The purpose of generic rules is to allow you to filter
|
|
non-IP packets. For IP, it is generally easier to use the
|
|
IP rules directly. For generic rules, the Prestige treats
|
|
a packet as a byte stream as opposed to an IP packet. You
|
|
specify the portion of the packet to check with the Offset
|
|
(from 0) and the Length fields, both in bytes. The Prestige
|
|
applies the Mask (bit-wise ANDing) to the data portion
|
|
before comparing the result against the Value to determine
|
|
a match. The Mask and Value are specified in hexadecimal
|
|
numbers. Note that it takes two hexadecimal digits to
|
|
represent a byte, so if the length is 4, the value in
|
|
either field will take 8 digits, e.g., FFFFFFFF."
|
|
::= { filterRuleEntry 3 }
|
|
|
|
filterRuleIpProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, protocol refers to the upper layer
|
|
protocol, e.g., TCP is 6, UDP is 17 and ICMP is 1.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 4 }
|
|
|
|
filterRuleIpSourceRoute OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, If Yes, the rule applies to packet
|
|
with IP source route option; else the packet must not
|
|
have source route option. The majority of IP packets
|
|
do not have source route.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 5 }
|
|
|
|
filterRuleDestIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the destination IP Address of
|
|
the packet you wish to filter. This object is
|
|
disregarded if it is 0.0.0.0.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 6 }
|
|
|
|
filterRuleDestIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the IP mask apply to the
|
|
Destination IP Addr.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 7 }
|
|
|
|
filterRuleDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the destination port of
|
|
the packets that you wish to filter.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 8 }
|
|
|
|
filterRuleDestPortComp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
equal(2),
|
|
notequal(3),
|
|
less(4),
|
|
greater(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, this object select the comparison
|
|
to apply to the filterRuleDestPortComp in the packet
|
|
against the value given in filterRuleDestPortComp.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 9 }
|
|
|
|
filterRuleSourceIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the source IP Address of
|
|
the packet you wish to filter. This object is
|
|
disregarded if it is 0.0.0.0.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 10 }
|
|
|
|
filterRuleSourceIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the IP mask apply to the
|
|
source IP Addr.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 11 }
|
|
|
|
filterRuleSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, it's the source port of the
|
|
packets that you wish to filter.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 12 }
|
|
|
|
filterRuleSourcePortComp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
equal(2),
|
|
notequal(3),
|
|
less(4),
|
|
greater(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, this object select the comparison
|
|
to apply to the filterRuleSourcePort in the packet
|
|
against the value given in filterRuleSourcePort.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 13 }
|
|
|
|
filterRuleTcpEstab OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For TCP/IP filter, this object is applicable only when
|
|
filterRuleIpProtocol is 6, TCP. If yes, the rule matches
|
|
only established TCP connections; else the rule matches
|
|
all TCP packets.
|
|
For generic filter this object is disregarded."
|
|
::= { filterRuleEntry 14 }
|
|
|
|
filterRuleGenericOffset OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For generic filter, this object is the starting byte of
|
|
the data portion in the packet that you wish to compare.
|
|
For TCP/IP filter this object is disregarded."
|
|
::= { filterRuleEntry 15 }
|
|
|
|
filterRuleGenericLength OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For generic filter, this object is byte count of the data
|
|
portion in the packet that you wish to compare.
|
|
For TCP/IP filter this object is disregarded."
|
|
::= { filterRuleEntry 16 }
|
|
|
|
filterRuleGenericMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For generic filter, this object is the Mask apply to the
|
|
data portion before comparison.
|
|
For TCP/IP filter this object is disregarded."
|
|
::= { filterRuleEntry 17 }
|
|
|
|
filterRuleGenericValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For generic filter, this object is the value to compare
|
|
with the data portion.
|
|
For TCP/IP filter this object is disregarded."
|
|
::= { filterRuleEntry 18 }
|
|
|
|
filterRuleMore OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
yes(2),
|
|
no(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If yes, a matching packet is passed to the next filter
|
|
rule before an action is taken; if no, the packet is
|
|
disposed of according to the action fields."
|
|
::= { filterRuleEntry 19 }
|
|
|
|
filterRuleLog OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1), -- none of the following
|
|
actMatched(2),
|
|
atcNotMatch(3),
|
|
both(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"* None :
|
|
No packets will be logged.
|
|
* Action Matched :
|
|
Only packets that match the rule parameters will be logged.
|
|
* Action Not Matched :
|
|
Only packets that do not match the rule parameters
|
|
will be logged.
|
|
* Both :
|
|
All packets will be logged."
|
|
::= { filterRuleEntry 20 }
|
|
|
|
filterRuleActMatched OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
checkNextRule(2),
|
|
forward(3),
|
|
drop(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object select the action for a matching packet. If
|
|
filterRuleMore is Yes, this object is disregarded.
|
|
"
|
|
::= { filterRuleEntry 21 }
|
|
|
|
filterRuleActNotMatched OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
checkNextRule(2),
|
|
forward(3),
|
|
drop(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object select the action for a packet not matching
|
|
the rule. If filterRuleMore is Yes, this object is
|
|
disregarded."
|
|
::= { filterRuleEntry 22 }
|
|
|
|
|
|
-- Prestige common traps related managed objects
|
|
|
|
whyReboot OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Send a message to the manager that the system is going to reboot.
|
|
The variable is the reason of rebooting."
|
|
::= { prestigeTraps 1 }
|
|
|
|
|
|
-- Prestige common traps
|
|
|
|
reboot TRAP-TYPE
|
|
ENTERPRISE prestigeCommon
|
|
VARIABLES {
|
|
whyReboot
|
|
}
|
|
DESCRIPTION "Send a message to the manager that the system is going to reboot.
|
|
The variable is the reason why the system reboots."
|
|
::= 1
|
|
|
|
END
|