From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/accedian/ACD-DISCOVERY-MIB | 443 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 443 insertions(+) create mode 100644 MIBS/accedian/ACD-DISCOVERY-MIB (limited to 'MIBS/accedian/ACD-DISCOVERY-MIB') diff --git a/MIBS/accedian/ACD-DISCOVERY-MIB b/MIBS/accedian/ACD-DISCOVERY-MIB new file mode 100644 index 0000000..fafdf07 --- /dev/null +++ b/MIBS/accedian/ACD-DISCOVERY-MIB @@ -0,0 +1,443 @@ +-- +-- Accedian Enterprise Specific MIB +-- +-- Copyright (c) 2005-2011, Accedian Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + + +ACD-DISCOVERY-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE,IpAddress, Unsigned32 FROM SNMPv2-SMI + DisplayString, DateAndTime, MacAddress FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + acdMibs FROM ACCEDIAN-SMI; + +acdDiscovery MODULE-IDENTITY + + LAST-UPDATED "201111010100Z" + ORGANIZATION "Accedian Networks, Inc." + CONTACT-INFO + "Accedian Technical Assistance Center + Accedian Networks, Inc. + 4878 Levy, suite 202 + Saint-Laurent, Quebec Canada H4R 2P1 + E-mail: support@accedian.com" + DESCRIPTION + "The discovery inventory information for this Accedian Networks device." + + REVISION "201111010100Z" -- 1 November 2011 + DESCRIPTION + "Addition of MAC Address List table." + + REVISION "200810010100Z" -- 1 October 2008 + DESCRIPTION + "Initial version of MIB module ACD-DISCOVERY-MIB." + + ::= { acdMibs 11 } + +acdDiscoveryNotifications OBJECT IDENTIFIER ::= { acdDiscovery 0 } +acdDiscoveryMIBObjects OBJECT IDENTIFIER ::= { acdDiscovery 1 } +acdDiscoveryConformance OBJECT IDENTIFIER ::= { acdDiscovery 2 } + +acdDiscoveryInventory OBJECT IDENTIFIER ::= { acdDiscoveryMIBObjects 1 } + +------------------------------------------------------------------------------- + -- The discovery inventory table. + -- This table contains the information on all the NID neighbors. +------------------------------------------------------------------------------- + +acdDiscoveryInventoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdDiscoveryInventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information on neighboring NIDs" + ::= { acdDiscoveryInventory 1 } + +acdDiscoveryInventoryEntry OBJECT-TYPE + SYNTAX AcdDiscoveryInventoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Inventory information." + INDEX { acdDiscoveryIndex } + ::= { acdDiscoveryInventoryTable 1 } + + +AcdDiscoveryInventoryEntry ::= SEQUENCE { + acdDiscoveryIndex Unsigned32, + acdDiscoveryMgmtIpAddress IpAddress, + acdDiscoverySystemName DisplayString, + acdDiscoverySystemDesc DisplayString, + acdDiscoverySerialNumber DisplayString, + acdDiscoveryLastChange DateAndTime, + acdDiscoveryDomain DisplayString, + acdDiscoveryFirmware DisplayString, + acdDiscoveryBaseMacAddress MacAddress, + acdDiscoveryInterfaceMacAddress MacAddress, + acdDiscoveryChassisIdSubtype Unsigned32, + acdDiscoveryChassisId DisplayString, + acdDiscoveryLocalPortId DisplayString, + acdDiscoveryRemotePortId DisplayString, + acdDiscoveryWebServerPort Unsigned32, + acdDiscoverySnmpAgentPort Unsigned32, + acdDiscoverySshPort Unsigned32, + acdDiscoveryVlan1 Unsigned32, + acdDiscoveryVlan2 Unsigned32 +} + +acdDiscoveryIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of this object uniquely identifies this acdDiscovery + entry." + ::= { acdDiscoveryInventoryEntry 1 } + +acdDiscoveryMgmtIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the management interface." + ::= { acdDiscoveryInventoryEntry 2 } + +acdDiscoverySystemName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An administratively-assigned name for this managed node." + ::= { acdDiscoveryInventoryEntry 3 } + +acdDiscoverySystemDesc OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system description." + ::= { acdDiscoveryInventoryEntry 4 } + +acdDiscoverySerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the serial number of the unit." + ::= { acdDiscoveryInventoryEntry 5 } + +acdDiscoveryLastChange OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the last time we received an information frame for the device." + ::= { acdDiscoveryInventoryEntry 6 } + +acdDiscoveryDomain OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..63)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the discovery domain." + ::= { acdDiscoveryInventoryEntry 7 } + +acdDiscoveryFirmware OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The firmware version of the unit." + ::= { acdDiscoveryInventoryEntry 8 } + +acdDiscoveryBaseMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The base MAC address of the remote NID based on the last information + frame received from the device. If no information has been received, + this object shall be equal to six octets of zero." + ::= { acdDiscoveryInventoryEntry 9 } + +acdDiscoveryInterfaceMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The management interface MAC address of the remote NID based on the + last information frame received from the device. If no information has + been received, this object shall be equal to six octets of zero." + ::= { acdDiscoveryInventoryEntry 10 } + +acdDiscoveryChassisIdSubtype OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The chassis ID subtype, as defined by IEEE 802.1AB." + ::= { acdDiscoveryInventoryEntry 11 } + +acdDiscoveryChassisId OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The chassis ID of the remote device." + ::= { acdDiscoveryInventoryEntry 12 } + +acdDiscoveryLocalPortId OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the port name where the advertisement frame was received." + ::= { acdDiscoveryInventoryEntry 13 } + +acdDiscoveryRemotePortId OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the advertisement port of the remote device." + ::= { acdDiscoveryInventoryEntry 14 } + +acdDiscoveryWebServerPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The web server port of the remote device." + ::= { acdDiscoveryInventoryEntry 15 } + +acdDiscoverySnmpAgentPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SNMP agent port of the remote device. If 0, SNMP agent is disabled." + ::= { acdDiscoveryInventoryEntry 16 } + +acdDiscoverySshPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The SSH port of the remote device." + ::= { acdDiscoveryInventoryEntry 17 } + +acdDiscoveryVlan1 OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first VLAN on the remote device interface. No VLAN when this value is zero." + ::= { acdDiscoveryInventoryEntry 18 } + +acdDiscoveryVlan2 OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The second VLAN on the remote device interface. No VLAN when this value is zero." + ::= { acdDiscoveryInventoryEntry 19 } + +--------------------------------------------------------------------------- + -- The IP interface table + -- This table contains all interfaces found on the remote device, excluding the + -- management interface, which was configured by a beacon frame. +--------------------------------------------------------------------------- + +acdDiscoveryIpListTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdDiscoveryIpListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains all interfaces found on the remote device, excluding the + management interface, which was configured by a beacon frame." + ::= { acdDiscoveryInventory 2 } + +acdDiscoveryIpListEntry OBJECT-TYPE + SYNTAX AcdDiscoveryIpListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of the IP address of an interface on the remote device." + INDEX { acdDiscoveryIndex, acdDiscoveryIpListIndex } + ::= { acdDiscoveryIpListTable 1 } + +AcdDiscoveryIpListEntry ::= SEQUENCE { + acdDiscoveryIpListIndex Unsigned32, + acdDiscoveryIpListAddress IpAddress +} + +acdDiscoveryIpListIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each row. Based on number of interface found." + ::= { acdDiscoveryIpListEntry 1 } + +acdDiscoveryIpListAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the IP address on one of the interfaces found on the remote NID." + ::= { acdDiscoveryIpListEntry 2 } + +--------------------------------------------------------------------------- + -- The port MAC address table. + -- This table contains MAC address or ports found on the remote device. + -- For a first phase, only the MAC addresses for ports of a line cards in + -- a MetroNODE chassis are listed. Eventually, we may add to the list the + -- MAC address of all available ports including those of a MetroNID and + -- those of a controller card of a MetroNODE. +--------------------------------------------------------------------------- + +acdDiscoveryMacAddressListTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdDiscoveryMacAddressListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains MAC addresses of ports found on the remote device. Not + all port MAC addresses are necessary listed." + ::= { acdDiscoveryInventory 3 } + +acdDiscoveryMacAddressListEntry OBJECT-TYPE + SYNTAX AcdDiscoveryMacAddressListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of the MAC address of a port on the remote device." + INDEX { acdDiscoveryIndex, acdDiscoveryMacAddressListIndex } + ::= { acdDiscoveryMacAddressListTable 1 } + +AcdDiscoveryMacAddressListEntry ::= SEQUENCE { + acdDiscoveryMacAddressListIndex Unsigned32, + acdDiscoveryMacAddressListSystemSlotId Unsigned32, + acdDiscoveryMacAddressListPortId Unsigned32, + acdDiscoveryMacAddressListPortName DisplayString, + acdDiscoveryMacAddressListPortMacAddress MacAddress +} + +acdDiscoveryMacAddressListIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each row. Based on number of port MAC addresses found." + ::= { acdDiscoveryMacAddressListEntry 1 } + +acdDiscoveryMacAddressListSystemSlotId OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "System slot identifier of module on which the port is located. + Applies only to a MetroNODE module. Value is 0 for a MetroNID device." + ::= { acdDiscoveryMacAddressListEntry 2 } + +acdDiscoveryMacAddressListPortId OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port identifier." + ::= { acdDiscoveryMacAddressListEntry 3 } + +acdDiscoveryMacAddressListPortName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port name." + ::= { acdDiscoveryMacAddressListEntry 4 } + +acdDiscoveryMacAddressListPortMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the MAC address of one of the ports found on the remote device." + ::= { acdDiscoveryMacAddressListEntry 5 } + +--------------------------------------------------------------------------- + -- ACD-DISCOVERY-MIB Module - Conformance Information +--------------------------------------------------------------------------- + +acdDiscoveryCompliances OBJECT IDENTIFIER ::= { acdDiscoveryConformance 1 } +acdDiscoveryGroups OBJECT IDENTIFIER ::= { acdDiscoveryConformance 2 } + +--------------------------------------------------------------------------- + -- Units of conformance +--------------------------------------------------------------------------- + +acdDiscoveryInventoryGroup OBJECT-GROUP + OBJECTS { + acdDiscoveryMgmtIpAddress, + acdDiscoverySystemName, + acdDiscoverySystemDesc, + acdDiscoverySerialNumber, + acdDiscoveryLastChange, + acdDiscoveryDomain, + acdDiscoveryFirmware, + acdDiscoveryBaseMacAddress, + acdDiscoveryInterfaceMacAddress, + acdDiscoveryChassisIdSubtype, + acdDiscoveryChassisId, + acdDiscoveryLocalPortId, + acdDiscoveryRemotePortId, + acdDiscoveryWebServerPort, + acdDiscoverySnmpAgentPort, + acdDiscoverySshPort, + acdDiscoveryVlan1, + acdDiscoveryVlan2 + } + STATUS current + DESCRIPTION + "." + ::= { acdDiscoveryGroups 1 } + +acdDiscoveryIpListGroup OBJECT-GROUP + OBJECTS { + acdDiscoveryIpListAddress + } + STATUS current + DESCRIPTION + "." + ::= { acdDiscoveryGroups 2 } + +acdDiscoveryMacAddressListGroup OBJECT-GROUP + OBJECTS { + acdDiscoveryMacAddressListSystemSlotId, + acdDiscoveryMacAddressListPortId, + acdDiscoveryMacAddressListPortName, + acdDiscoveryMacAddressListPortMacAddress + } + STATUS current + DESCRIPTION + "." + ::= { acdDiscoveryGroups 3 } + +acdDiscoveryCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for support of the ACD-DISCOVERY-MIB module." + MODULE + MANDATORY-GROUPS { + acdDiscoveryInventoryGroup, + acdDiscoveryIpListGroup, + acdDiscoveryMacAddressListGroup + } + + ::= { acdDiscoveryCompliances 1 } + +END + -- cgit v1.2.3