From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/audiocodes/AC-MEDIA-MIB | 4867 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4867 insertions(+) create mode 100644 MIBS/audiocodes/AC-MEDIA-MIB (limited to 'MIBS/audiocodes/AC-MEDIA-MIB') diff --git a/MIBS/audiocodes/AC-MEDIA-MIB b/MIBS/audiocodes/AC-MEDIA-MIB new file mode 100644 index 0000000..d467e68 --- /dev/null +++ b/MIBS/audiocodes/AC-MEDIA-MIB @@ -0,0 +1,4867 @@ + +AC-MEDIA-MIB DEFINITIONS ::= BEGIN + + + IMPORTS + + + OBJECT-TYPE, + MODULE-IDENTITY FROM SNMPv2-SMI + TAddress, + DisplayString, + DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC + IpAddress FROM RFC1155-SMI + Unsigned32, + Integer32, + enterprises FROM SNMPv2-SMI + RowStatus FROM SNMPv2-TC + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + audioCodes, + acRegistrations, + acGeneric, + acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB; + + +acMedia MODULE-IDENTITY + LAST-UPDATED "201207260501Z" --Thursday, July 26 2012 + ORGANIZATION "AudioCodes Ltd" + CONTACT-INFO + "Postal: Support + AudioCodes LTD + 1 Hayarden Street + Airport City + Lod, ISRAEL 70151 + Tel: 972-3-9764000 + Fax: 972-3-9764040 + Email: support@audiocodes.com + Web: www.audiocodes.com" + + DESCRIPTION + "" + + + + ::= {acBoardMibs 4} + + + + + + + + + acMediaConfiguration OBJECT IDENTIFIER ::= {acMedia 1} + + + acMediaDSPConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 1} + + + acMediaDSPConfigVersionTemplateNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the DSP load number. Each load has a different coder +list, a different channel capacity and different features supported. + +Range = 0 to 255. +Access: Offline. +AC INI-Param: DSPVERSIONTEMPLATENUMBER" + ::= {acMediaDSPConfig 1} + + + + -- **************************************** + -- acMediaDsp table declaration + -- **************************************** + acMediaDspTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcMediaDspEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acMediaDSPConfig 21} + + + + -- **************************************** + -- acMediaDsp table entry + -- **************************************** + acMediaDspEntry OBJECT-TYPE + SYNTAX AcMediaDspEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acMediaDspIndex} + ::= {acMediaDspTable 1} + + + + -- **************************************** + -- acMediaDsp TABLE + -- **************************************** + AcMediaDspEntry ::= SEQUENCE { + acMediaDspIndex Unsigned32, + acMediaDspRowStatus RowStatus, + acMediaDspTemplateNumber Unsigned32, + acMediaDspResourcesPercentage Unsigned32 + } + + + + acMediaDspIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry number in the table. +AC INI-Param: DspTemplates_Index" + ::= {acMediaDspEntry 1} + + + + acMediaDspRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: N/A" + ::= {acMediaDspEntry 2} + + + + acMediaDspTemplateNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..16) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "DSP template number. +Access: Offline. +AC INI-Param: DspTemplates_DspTemplateNumber" + ::= {acMediaDspEntry 3} + + + + acMediaDspResourcesPercentage OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Percentage use for the specified template. +Access: Offline. +AC INI-Param: DspTemplates_DspResourcesPercentage" + ::= {acMediaDspEntry 4} + + + + acMediaVoiceConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 2} + + + acVoice OBJECT IDENTIFIER ::= {acMediaVoiceConfig 1} + + + acVoicePayloadFormat OBJECT-TYPE + SYNTAX INTEGER { + voicePayloadFormatRTP(0) +, + voicePayloadFormatATM(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the voice payload format. Choose either 0 = RTP or 1 = +ATM (which enables working with vendors that use G.726 ATM Payload +Format over RTP. Uses the enum acTVoicePayloadFormat. +0 = VoicePayloadFormatRTP +1 = VoicePayloadFormatATM +2 = VoicePAyloadFormatIllegal. +Access: Online. +AC INI-Param: VOICEPAYLOADFORMAT" + ::= {acVoice 1} + + + + acVoiceVolume OBJECT-TYPE + SYNTAX Integer32 (-32..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the voice output gain control. +Range: -32 dB to +31 dB in 1 dB steps +-32 = mute +Default = 0 = No Gain. +Access: Online. +AC INI-Param: VOICEVOLUME" + ::= {acVoice 2} + + + + acVoiceInputGain OBJECT-TYPE + SYNTAX Integer32 (-32..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the PCM input gain. +Range = -32 dB to +31 dB in 1 dB steps. +Default = No Gain. +Access: Online. +AC INI-Param: INPUTGAIN" + ::= {acVoice 3} + + + + acVoiceTestMode OBJECT-TYPE + SYNTAX INTEGER { + coderLoopback(0) +, + pCMLoopback(1) +, + toneInjection(2) +, + noLoopback(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the type of testing mode applied: + +0 = Coder Loopback performs an encoder/decoder loopback inside +the DSP device +1 = PCM Loopback loops back an incoming PCM to the outgoing +PCM. +2 = ToneInjection generates a 1000 Hz tone to the outgoing +PCM +3 = NoLoopback sets the channel to work in normal mode. +Access: Online. +AC INI-Param: TESTMODE" + ::= {acVoice 4} + + + + acVoiceTTYTransportType OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + inband-Relay(2) +, + bypass (1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the transferring method of TTY signals during a call + + +0 = Disable +1= Bypass +2 = Relay +. +Access: Online. +AC INI-Param: TTYTRANSPORTTYPE" + ::= {acVoice 5} + + + + acVoiceEnableMediaSecurity OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Media Security protocol (SRTP) . Enabling +this parameter might reduce the board channel capacity. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: ENABLEMEDIASECURITY" + ::= {acVoice 6} + + + + acVoiceAriaProtocolSupport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Aria encryption protocol. Enabling this +parameter might reduce the board channel capacity. + +0 = Disable +1 = Enable +Supported on TP6310, TP8410 and M800. +Access: Offline. +AC INI-Param: AriaProtocolSupport" + ::= {acVoice 7} + + + + acVoiceCoderRate OBJECT IDENTIFIER ::= {acVoice 20} + + + acVoiceCoderRateEVRC OBJECT-TYPE + SYNTAX INTEGER { + variableRate(0) +, + ac1kbps(1) +, + ac4kbps(2) +, + ac8kbps(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to configure the EVRC coder bit rate. +0 = Variable Rate +1 = 1 kbps +2 = 4 kbps +3 = 8 kbps. +Access: Online. +AC INI-Param: EVRCRate" + ::= {acVoiceCoderRate 1} + + + + acVoiceCoderRateQCELP8 OBJECT-TYPE + SYNTAX INTEGER { + variableRate(0) +, + ac1kbps(1) +, + ac2kbps(2) +, + ac4kbps(3) +, + ac8kbps(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to configure the QCELP8 coder bit rate. +0 = Variable Rate +1 = 1 kbps +2 = 2 kbps +3 = 4 kbps +4 = 8 kbps. +Access: Online. +AC INI-Param: QCELP8Rate" + ::= {acVoiceCoderRate 2} + + + + acVoiceCoderRateQCELP13 OBJECT-TYPE + SYNTAX INTEGER { + variableRate(0) +, + ac1kbps(1) +, + ac3kbps(2) +, + ac7kbps(3) +, + ac13kbps(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to configure the QCELP13 coder bit rate. +0 = Variable Rate +1 = 1 kbps +2 = 3 kbps +3 = 7 kbps +4 = 13 kbps + +. +Access: Online. +AC INI-Param: QCELP13Rate" + ::= {acVoiceCoderRate 3} + + + + acVoiceCoderRateG729EVMaxBitRate OBJECT-TYPE + SYNTAX INTEGER { + g729EV-RATE-8-KBPS (0) +, + g729EV-RATE-12-KBPS (1) +, + g729EV-RATE-14-KBPS (2) +, + g729EV-RATE-16-KBPS (3) +, + g729EV-RATE-18-KBPS (4) +, + g729EV-RATE-20-KBPS (5) +, + g729EV-RATE-22-KBPS (6) +, + g729EV-RATE-24-KBPS (7) +, + g729EV-RATE-26-KBPS (8) +, + g729EV-RATE-28-KBPS (9) +, + g729EV-RATE-30-KBPS (10) +, + g729EV-RATE-32-KBPS (11) +, + g729EV-RATE-UNDEFINED (15) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the maximum generation bitrate for all participants +in a session using G729EV coder. This parameter is defined +per session and is equal for all the parties. The initial +generation bit rate is the minimum between the MaxBitRate and +the MBS values. + +Possible values are: +0 = G729EV_RATE_8_KBPS +1 = G729EV_RATE_12_KBPS +2 = G729EV_RATE_14_KBPS +3 = G729EV_RATE_16_KBPS +4 = G729EV_RATE_18_KBPS +5 = G729EV_RATE_20_KBPS +6 = G729EV_RATE_22_KBPS +7 = G729EV_RATE_24_KBPS +8 = G729EV_RATE_26_KBPS +9 = G729EV_RATE_28_KBPS +10 = G729EV_RATE_30_KBPS +11 = G729EV_RATE_32_KBPS +15 = G729EV_RATE_UNDEFINED. +Access: Online. +AC INI-Param: G729EVMaxBitRate" + ::= {acVoiceCoderRate 4} + + + + acVoiceCoderRateG729EVLocalMBS OBJECT-TYPE + SYNTAX INTEGER { + g729EV-RATE-8-KBPS (0) +, + g729EV-RATE-12-KBPS (1) +, + g729EV-RATE-14-KBPS (2) +, + g729EV-RATE-16-KBPS (3) +, + g729EV-RATE-18-KBPS (4) +, + g729EV-RATE-20-KBPS (5) +, + g729EV-RATE-22-KBPS (6) +, + g729EV-RATE-24-KBPS (7) +, + g729EV-RATE-26-KBPS (8) +, + g729EV-RATE-28-KBPS (9) +, + g729EV-RATE-30-KBPS (10) +, + g729EV-RATE-32-KBPS (11) +, + g729EV-RATE-UNDEFINED (15) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the maximal bitrate, which may be used by the G729EV +coder at a specific channel. This parameter is defined +per channel and may vary between the parties. The initial generation +bit rate is the minimum between the MaxBitRate and +the MBS values. + +Possible values are: +0 = G729EV_RATE_8_KBPS +1 = G729EV_RATE_12_KBPS +2 = G729EV_RATE_14_KBPS +3 = G729EV_RATE_16_KBPS +4 = G729EV_RATE_18_KBPS +5 = G729EV_RATE_20_KBPS +6 = G729EV_RATE_22_KBPS +7 = G729EV_RATE_24_KBPS +8 = G729EV_RATE_26_KBPS +9 = G729EV_RATE_28_KBPS +10 = G729EV_RATE_30_KBPS +11 = G729EV_RATE_32_KBPS +15 = G729EV_RATE_UNDEFINED. +Access: Online. +AC INI-Param: G729EVLocalMBS" + ::= {acVoiceCoderRate 5} + + + + acVoiceCoderRateG729EVReceiveMBS OBJECT-TYPE + SYNTAX INTEGER { + g729EV-RATE-8-KBPS (0) +, + g729EV-RATE-12-KBPS (1) +, + g729EV-RATE-14-KBPS (2) +, + g729EV-RATE-16-KBPS (3) +, + g729EV-RATE-18-KBPS (4) +, + g729EV-RATE-20-KBPS (5) +, + g729EV-RATE-22-KBPS (6) +, + g729EV-RATE-24-KBPS (7) +, + g729EV-RATE-26-KBPS (8) +, + g729EV-RATE-28-KBPS (9) +, + g729EV-RATE-30-KBPS (10) +, + g729EV-RATE-32-KBPS (11) +, + g729EV-RATE-UNDEFINED (15) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the value of the MBS field of the G729EV frames to +be sent to the other party. This parameter reflects the maximum +bit rate, which the local G729EV supports as a receiver. + +Possible values are: +0 = G729EV_RATE_8_KBPS +1 = G729EV_RATE_12_KBPS +2 = G729EV_RATE_14_KBPS +3 = G729EV_RATE_16_KBPS +4 = G729EV_RATE_18_KBPS +5 = G729EV_RATE_20_KBPS +6 = G729EV_RATE_22_KBPS +7 = G729EV_RATE_24_KBPS +8 = G729EV_RATE_26_KBPS +9 = G729EV_RATE_28_KBPS +10 = G729EV_RATE_30_KBPS +11 = G729EV_RATE_32_KBPS +15 = G729EV_RATE_UNDEFINED. +Access: Online. +AC INI-Param: G729EVReceiveMBS" + ::= {acVoiceCoderRate 6} + + + + acVoiceCoderRateMsRtaForwardErrorCorrectionEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the Microsoft RTA coder forward error correction +mode. + +0 - Disable. +1 - Enable. +Access: Online. +AC INI-Param: MSRTAForwardErrorCorrectionEnable" + ::= {acVoiceCoderRate 7} + + + + acVoiceCoderRateMsRtaTxBitRate OBJECT-TYPE + SYNTAX Unsigned32 (0..29000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the Microsoft RTA coder TX bit rate. + +0 - Automatic. +Any value between 8,800 - 29,000. +Access: Online. +AC INI-Param: MSRTATxBitRate" + ::= {acVoiceCoderRate 8} + + + + acVoiceCoderRateSilkTxInbandFEC OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the SILK encoder forward error correction mode. +Access: Online. +AC INI-Param: SilkTxInbandFEC" + ::= {acVoiceCoderRate 9} + + + + acVoiceCoderRateSilkMaxAverageBitRate OBJECT-TYPE + SYNTAX Unsigned32 (5000..30000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the SILK encoder maximal average bit rate. Narrow +band range is 5000-16000 .Wide band range is 8000-30000. +Access: Online. +AC INI-Param: SilkMaxAverageBitRate" + ::= {acVoiceCoderRate 10} + + + + acVoiceCoderRateSpeexNBBitRate OBJECT-TYPE + SYNTAX INTEGER { + cE-SPEEX-NB-RATE-2-15-KBPS(1) +, + cE-SPEEX-NB-RATE-5-95-KBPS(2) +, + cE-SPEEX-NB-RATE-8-00-KBPS(3) +, + cE-SPEEX-NB-RATE-11-0-KBPS(4) +, + cE-SPEEX-NB-RATE-15-0-KBPS(5) +, + cE-SPEEX-NB-RATE-18-2-KBPS(6) +, + cE-SPEEX-NB-RATE-24-6-KBPS(7) +, + cE-SPEEX-NB-RATE-3-95-KBPS(8) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the bitrate of Speex NB coder. +Access: Instant. +AC INI-Param: SpeexNBBitRate" + ::= {acVoiceCoderRate 11} + + + + acVoiceCoderRateSpeexWBBitRate OBJECT-TYPE + SYNTAX INTEGER { + cE-SPEEX-WB-RATE-3-95-KBPS(0) +, + cE-SPEEX-WB-RATE-5-75-KBPS(1) +, + cE-SPEEX-WB-RATE-7-75-KBPS(2) +, + cE-SPEEX-WB-RATE-9-80-KBPS(3) +, + cE-SPEEX-WB-RATE-12-8-KBPS(4) +, + cE-SPEEX-WB-RATE-16-8-KBPS(5) +, + cE-SPEEX-WB-RATE-20-6-KBPS(6) +, + cE-SPEEX-WB-RATE-23-8-KBPS(7) +, + cE-SPEEX-WB-RATE-27-8-KBPS(8) +, + cE-SPEEX-WB-RATE-34-2-KBPS(9) +, + cE-SPEEX-WB-RATE-42-2-KBPS(10) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the bitrate of Speex WB coder. +Access: Instant. +AC INI-Param: SpeexWBBitRate" + ::= {acVoiceCoderRate 12} + + + + acVoiceAGC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 2} + + + acVoiceAGCEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Activates the AGC (Automatic Gain Control). +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLEAGC" + ::= {acVoiceAGC 1} + + + + acVoiceAGCGainSlope OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AGC (Automatic Gain Control) convergence rate. +Range = 0 to 31 (according to acTAGCGainSlope) +Default = 3 (= 1 db/sec). +Access: Online. +AC INI-Param: AGCGAINSLOPE" + ::= {acVoiceAGC 2} + + + + acVoiceAGCRedirection OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AGC (Automatic Gain Control) direction. +0 = AGC works on signals from the TDM side +1 = AGC works on signals coming from the Network side. +Access: Online. +AC INI-Param: AGCREDIRECTION" + ::= {acVoiceAGC 3} + + + + acVoiceAGCTargetEnergy OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the signal energy value [-dBm] that the AGC (Automatic +Gain Control) attempts to attain. + +Range = 0 to 63. +Access: Online. +AC INI-Param: AGCTARGETENERGY" + ::= {acVoiceAGC 4} + + + + acVoiceAGCMinGain OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the minimum gain by the AGC when activated [- db]. + +Range = 0 to -31. +Access: Offline. +AC INI-Param: AGCMINGAIN" + ::= {acVoiceAGC 5} + + + + acVoiceAGCMaxGain OBJECT-TYPE + SYNTAX Unsigned32 (0..18) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the maximum gain by the AGC when activated [db]. + +Range = 0 to 18. +Access: Offline. +AC INI-Param: AGCMAXGAIN" + ::= {acVoiceAGC 6} + + + + acVoiceAGCDisableFastAdaptation OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disables the AGC Fast Adaptation mode. + +Enable = 1 +Disable = 0. +Access: Offline. +AC INI-Param: AGCDISABLEFASTADAPTATION" + ::= {acVoiceAGC 7} + + + + acVoiceEC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 3} + + + acVoiceECEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the Echo Canceller. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLEECHOCANCELLER" + ::= {acVoiceEC 1} + + + + acVoiceECMaxLength OBJECT-TYPE + SYNTAX INTEGER { + eCLengthDefault(0) +, + eCLength15MSec(1) +, + eCLength20MSec(2) +, + eCLength25MSec(3) +, + eCLength32MSec(4) +, + eCLength35MSec(5) +, + eCLength40MSec(6) +, + eCLength45MSec(7) +, + eCLength50MSec(8) +, + eCLength55MSec(9) +, + eCLength60MSec(10) +, + eCLength64MSec(11) +, + eCLength128MSec(22) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the maximum board EC (Echo Canceler) length capability. + +0 = EC length determined internally to reach maximum channel +capacity. +4 = 32 msec +11 = 64 msec +22 = 128 msec +TP-1610 only: +Using 64 or 128 msec reduces the channel capacity to 200 channels. +. +Access: Offline. +AC INI-Param: MAXECHOCANCELLERLENGTH" + ::= {acVoiceEC 2} + + + + acVoiceECHybridLoss OBJECT-TYPE + SYNTAX INTEGER { + eCHybridLoss6DBM(0) +, + eCHybridLoss0DBM(2) +, + eCHybridLoss3DBM(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the worst case ratio between the signal level transmitted +to the hybrid and the echo level returning from hybrid. Set +this per worst hybrid in the system in terms of echo return +loss. Refer to the enumeration acTECHybridLoss. + +0 = 6 dBm +2 = 0 dBm +3 = 3 dBm. +Access: Online. +AC INI-Param: ECHYBRIDLOSS" + ::= {acVoiceEC 3} + + + + acVoiceECToneDetector OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to configure the Echo Canceler Tone Detector. Detects a +2100 Hz tone at the input signal to the TDM (received signal). +Improves Echo Canceler operation accordingly. Detects 2100, +2100 with phase reversals and 2100 with AM. Improves the +operation of the Echo Canceler by slowing adaptation when the +signal is detected. This data is also used by the fax state +machine. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ECEnableToneDetector" + ::= {acVoiceEC 4} + + + + acVoiceECComfortNoiseGeneration OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Use this parameter to enable or enable Echo Canceler Comfort +Noise Generation, which generates comfort noise when the Non +Linear Processor (NLP) is active. +When the NLP ascertains that the signal is echo and not doubletalk +and decides to clip, instead of transmitting silence +it transmits a synthesized signal similar to the background +noise. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ECEnableComfortNoiseGeneration" + ::= {acVoiceEC 5} + + + + acVoiceSC OBJECT IDENTIFIER ::= {acMediaVoiceConfig 4} + + + acVoiceSCMode OBJECT-TYPE + SYNTAX INTEGER { + sILENCE-COMPRESION-DISABLE(0) +, + sILENCE-COMPRESION-ENABLE(1) +, + sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Silence Suppression Mode. + +0 = Disable = SILENCE_COMPRESION_DISABLE +1 = Enable = SILENCE_COMPRESION_ENABLE +2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE. +Access: Online. +AC INI-Param: ENABLESILENCECOMPRESSION" + ::= {acVoiceSC 1} + + + + acVoiceSCVBRCoderDTXMin OBJECT-TYPE + SYNTAX Unsigned32 (0..20000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the minimum number of frames gap between two SID frames, +when using the EVRC voice activity detector. +. +Access: Online. +AC INI-Param: EVRCDTXMin" + ::= {acVoiceSC 2} + + + + acVoiceSCVBRCoderDTXMax OBJECT-TYPE + SYNTAX Unsigned32 (0..20000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the maximum number of frames gap between two SID frames, +when using the EVRC voice activity detector. +Access: Online. +AC INI-Param: EVRCDTXMax" + ::= {acVoiceSC 3} + + + + acVoiceSCVBRCoderHangover OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "For indicating the desired number of silence frames at the beginning +of each silence period, when using the VBR CODER silence +suppression. +. +Access: Online. +AC INI-Param: VBRCoderHangover" + ::= {acVoiceSC 4} + + + + acMediaFaxModemConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 3} + + + acFaxModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 1} + + + acFMCommon OBJECT IDENTIFIER ::= {acFaxModem 1} + + + acFMCommonRelayVolume OBJECT-TYPE + SYNTAX Integer32 (-18..-3) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the fax gain control. + +The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps +of 1 dBm. +Access: Online. +AC INI-Param: FAXMODEMRELAYVOLUME" + ::= {acFMCommon 1} + + + + acFMCommonV34Transport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) +, + ansMute(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the V.34 modem transport method. + +0 = Transparent +2 = Bypass +3 = Transparent with Events +4 = AnsMute. +Access: Online. +AC INI-Param: V34MODEMTRANSPORTTYPE" + ::= {acFMCommon 2} + + + + acFMCommonEnableInbandNetworkDetection OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables inband network detection related to fax/modem. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: EnableFaxModemInbandNetworkDetection" + ::= {acFMCommon 3} + + + + acFMCommonCEDTransferMode OBJECT-TYPE + SYNTAX INTEGER { + usingFaxRelayOrVBD(0) +, + voiceModeOrVBD(1) +, + rFC4733BlockingRTPVBD(2) +, + rFC4733AlongWithRTPVBD(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0 - transfer CED using T38. +1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0). +2 - transfer CED using RFC, and block CED over VBD/VoIP. +3 - transfer CED using RFC in parallel with CED over VBD/VoIP. +Access: Instant. +AC INI-Param: CEDTransferMode" + ::= {acFMCommon 4} + + + + acFMBypass OBJECT IDENTIFIER ::= {acFaxModem 2} + + + acFMBypassCoderType OBJECT-TYPE + SYNTAX INTEGER { + g711Alaw-64(0) +, + g711Mulaw(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Users can use this parameter to set the fax/modem bypass coder +(according to acTCoders). + +0 = G.711 A-Law +1 = G.711 Mu-Law. +Access: Online. +AC INI-Param: FAXMODEMBYPASSCODERTYPE" + ::= {acFMBypass 1} + + + + acFMBypassPacketizationPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the number of basic frames to generate one RTP fax/modem +bypass packet. +Access: Online. +AC INI-Param: FAXMODEMBYPASSM" + ::= {acFMBypass 2} + + + + acFMBypassBasicPacketInterval OBJECT-TYPE + SYNTAX INTEGER { + pACKET-INTERVAL-DEFAULT(0) +, + pACKET-INTERVAL-5-MSEC(1) +, + pACKET-INTERVAL-10-MSEC(2) +, + pACKET-INTERVAL-20-MSEC(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the basic Fax / Modem Bypass RTP packet rate. +0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) +1 = 5 msec (PACKET_INTERVAL_5_MSEC) +2 = 10 msec (PACKET_INTERVAL_10_MSEC) +3 = 20 msec (PACKET_INTERVAL_20_MSEC). +Access: Online. +AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL" + ::= {acFMBypass 3} + + + + acFMBypassDJBufMinDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..150) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the Jitter Buffer constant delay (in milliseconds) +during a Fax & Modem Bypass session. (The minimum Jitter Buffer +Size). + +Range = 0 to 150. +Access: Online. +AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY" + ::= {acFMBypass 4} + + + + acFMBypassFaxBypassOutputGain OBJECT-TYPE + SYNTAX Integer32 (-31..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the fax bypass output gain control. +Range: -31 dB to +31 dB in 1 dB steps +Default = 0 = No Gain. +Access: Online. +AC INI-Param: FaxBypassOutputGain" + ::= {acFMBypass 5} + + + + acFMBypassModemBypassOutputGain OBJECT-TYPE + SYNTAX Integer32 (-31..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the modem bypass output gain control. +Range: -31 dB to +31 dB in 1 dB steps +Default = 0 = No Gain. +Access: Online. +AC INI-Param: ModemBypassOutputGain" + ::= {acFMBypass 6} + + + + acFMNSE OBJECT IDENTIFIER ::= {acFaxModem 3} + + + acFMNSEPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Users can use this parameter to modify the NSE packet's payload +type. + +Range = 96 to 127. +Access: Online. +AC INI-Param: NSEPAYLOADTYPE" + ::= {acFMNSE 1} + + + + acFMNSEMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Cisco's NSE fax / modem automatic pass-through +mode. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: NSEMODE" + ::= {acFMNSE 2} + + + + acFax OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 2} + + + acFaxTransportMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the Fax over IP transport method. + +0 = Transparent +1 = Relay +2 = Bypass +3 = Transparent with Events. +Access: Online. +AC INI-Param: FAXTRANSPORTMODE" + ::= {acFax 1} + + + + acFaxBypassPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (0..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Users can use this parameter to modify the Fax Bypass Mode RTP +packet's payload type. +In the case of congestion (if the selected payload type is +already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR +is issued and the payload type is set to the +default value (102). +It is the user's responsibility to avoid congestion with other +payload types. + +Range = 0 to 127. +Access: Online. +AC INI-Param: FAXBYPASSPAYLOADTYPE" + ::= {acFax 2} + + + + acFaxRelayECMEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the using of ECM mode during Fax Relay. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: FAXRELAYECMENABLE" + ::= {acFax 3} + + + + acFaxRelayMaxRate OBJECT-TYPE + SYNTAX INTEGER { + acRate2400bps(0) +, + acRate4800bps(1) +, + acRate7200bps(2) +, + acRate9600bps(3) +, + acRate12000bps(4) +, + acRate14400bps(5) +, + acRate16800bps(6) +, + acRate19200b(7) +, + acRate21600bps(8) +, + acRate24000bps(9) +, + acRate26400bps(10) +, + acRate28800bps(11) +, + acRate31200bps(12) +, + acRate33600bps(13) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Limits the maximum rate at which fax messages are transmitted. + +0 = 2400 bps +1 = 4800 bps +2 = 7200 bps +3 = 9600 bps +4 = 12000 bps +5 = 14400 bps +6 = 16800 bps +7 = 19200 bps +8 = 21600 bps +9 = 24000 bps +10 = 26400 bps +11 = 28800 bps +12 = 31200 bps +13 = 33600 bps. +Access: Online. +AC INI-Param: FAXRELAYMAXRATE" + ::= {acFax 4} + + + + acFaxRelayRedundancyDepth OBJECT-TYPE + SYNTAX Unsigned32 (0..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the depth of redundancy for fax packets. This parameter +is applicable only to non-V.21 packets. + +0 = No redundancy +1 = 1 packet redundancy +2 = 2 packet redundancy. +Access: Online. +AC INI-Param: FAXRELAYREDUNDANCYDEPTH" + ::= {acFax 5} + + + + acFaxEnhancedRelayRedundancyDepth OBJECT-TYPE + SYNTAX Unsigned32 (0..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the number of repetitions to be applied to control +packets when using the T.38 standard. + +0 = No redundancy +1 = 1 packet redundancy +2 = 2 packet redundancy +3 = 3 packet redundancy +4 = Maximum redundancy. +Access: Online. +AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH" + ::= {acFax 6} + + + + acFaxCNGDetectorMode OBJECT-TYPE + SYNTAX INTEGER { + cNG-DETECTOR-MODE-DISABLE(0) +, + cNG-DETECTOR-MODE-RELAY(1) +, + cNG-DETECTOR-MODE-EVENT-ONLY(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the CNG Detector mode. +0 = Disable +1 = Relay +2 = Event Only. +Access: Online. +AC INI-Param: CNGDETECTORMODE" + ::= {acFax 7} + + + + acFaxV34TransportMethod OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the V.34 fax transport method. + +One of the following values: + +0 = Transparent +1 = Relay +2 = Bypass +3 = Transparent with Events. +Access: Online. +AC INI-Param: V34FAXTRANSPORTTYPE" + ::= {acFax 8} + + + + acFaxT38Version OBJECT-TYPE + SYNTAX INTEGER { + t38Version0(0) +, + t38Version3(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "T38 fax relay version. + +0 = T.38 version 0 (from 06/1998) +3 = T.38 version 3 (V.34 over T.38 support) + +Default = 3. +Access: Online. +AC INI-Param: T38Version" + ::= {acFax 9} + + + + acModem OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 3} + + + acModemV22Transport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the V.22 modem transport method. + +0 = Transparent +2 = Bypass +3 = Transparent with Events. +Access: Online. +AC INI-Param: V22MODEMTRANSPORTTYPE" + ::= {acModem 1} + + + + acModemV23Transport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the V.23 modem transport method. +0 = Transparent +2 = Bypass +3 = Transparent with Events. +Access: Online. +AC INI-Param: V23MODEMTRANSPORTTYPE" + ::= {acModem 2} + + + + acModemV32Transport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) +, + ansMute(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the V.32 modem transport method. + +0 = Transparent +2 = Bypass +3 = Transparent with Events +4 = AnsMute. +Access: Online. +AC INI-Param: V32MODEMTRANSPORTTYPE" + ::= {acModem 3} + + + + acModemBypassPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (0..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Users can use this parameter to modify the Modem Bypass Mode +RTP packet's payload type. +In the case of congestion (if the selected payload type is +already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR +is issued and the payload type is set to the +default value (103). +It is the user's responsibility to avoid congestion with other +payload types. + +Range = 0 to 127. +Access: Online. +AC INI-Param: MODEMBYPASSPAYLOADTYPE" + ::= {acModem 4} + + + + acModemBellTransportType OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Use this parameter to set the Bell modem transport method. +0 = Transparent +2 = Bypass (enum ByPassEnable) +3 = Transparent with Events (enum EventsOnly). +Access: Online. +AC INI-Param: BellModemTransportType" + ::= {acModem 5} + + + + acModemV21Transport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + relayEnable(1) +, + byPassEnable(2) +, + eventsOnly(3) + + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets the V.21 modem transport method (must be set to 0 = Disable). + +0 = Transparent +2 = Bypass +3 = Transparent with Events. +Access: Online. +AC INI-Param: V21ModemTransportType" + ::= {acModem 6} + + + + acModemEnableV150ModemRelaySupport OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines whether to enable V.150.1 modem relay support. + +Range: +0 - Disable +1 - Enable. +Access: Offline. +AC INI-Param: EnableV150ModemRelaySupport" + ::= {acModem 7} + + + + acV150dot1 OBJECT IDENTIFIER ::= {acMediaFaxModemConfig 4} + + + acV150dot1AllocationProfile OBJECT-TYPE + SYNTAX Unsigned32 (0..20) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the V.150.1 profile, determining how many DSP channels + have V.150.1 support. + +Range = 0 to 3. +Access: Offline. +AC INI-Param: V1501AllocationProfile" + ::= {acV150dot1 1} + + + + acV150dot1SSEPayloadTypeRx OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SSE payload type RX. +Access: Online. +AC INI-Param: V1501SSEPayloadTypeRx" + ::= {acV150dot1 2} + + + + acV150dot1SSEPayloadTypeTx OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SSE payload type TX. +Access: Online. +AC INI-Param: V1501SSEPayloadTypeTx" + ::= {acV150dot1 3} + + + + acV150dot1SSERedundancyDepth OBJECT-TYPE + SYNTAX Unsigned32 (1..6) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SSE is a part of V150.1 modem relay protocol and SSE messages +are sent over RTP. +SSE redundancy refers to the sending of SSE messages several +times to increase reliability. This parameter determines the +number of times each SSE message is to be resent. +Access: Online. +AC INI-Param: V1501SSERedundancyDepth" + ::= {acV150dot1 4} + + + + acV150dot1SPRTPayloadTypeRx OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT payload type RX. +Access: Online. +AC INI-Param: V1501SPRTPayloadTypeRx" + ::= {acV150dot1 5} + + + + acV150dot1SPRTPayloadTypeTx OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT payload type TX. +Access: Online. +AC INI-Param: V1501SPRTPayloadTypeTx" + ::= {acV150dot1 6} + + + + acV150dot1SPRTTransportChannel0MaxPayloadSize OBJECT-TYPE + SYNTAX Unsigned32 (140..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT transport channel 0 max payload size. +Access: Online. +AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize" + ::= {acV150dot1 7} + + + + acV150dot1SPRTTransportChannel2MaxPayloadSize OBJECT-TYPE + SYNTAX Unsigned32 (132..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT transport channel 2 max payload size. +Access: Online. +AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize" + ::= {acV150dot1 8} + + + + acV150dot1SPRTTransportChannel2MaxWindowSize OBJECT-TYPE + SYNTAX Unsigned32 (8..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT transport channel 2 max window size. +Access: Online. +AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize" + ::= {acV150dot1 9} + + + + acV150dot1SPRTTransportChannel3MaxPayloadSize OBJECT-TYPE + SYNTAX Unsigned32 (140..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SPRT transport channel 3 max payload size. +Access: Online. +AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize" + ::= {acV150dot1 10} + + + + acMediaRtpRtcpConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 4} + + + acRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 1} + + + acRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE + SYNTAX Unsigned32 (3..2684354) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines for how long the RTP connection should be broken +before the Broken Connection event is issued. In units of 100 +msec. +. +Access: Online. +AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT" + ::= {acRtpRtcp 1} + + + + acRtpRtcpBrokenConnectionEventActivationMode OBJECT-TYPE + SYNTAX INTEGER { + afterFirstIncomingRTPPacket(0) +, + onRTPStreamActivation(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines if the broken connection mechanism is activated when +the RTP stream is activated or when the first RTP packet +is received. +0 = After First incoming packet (default) +1 = Upon channel’s RTP activation. +. +Access: Online. +AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE" + ::= {acRtpRtcp 2} + + + + acRtpRtcpBasicRTPPacketInterval OBJECT-TYPE + SYNTAX INTEGER { + pACKET-INTERVAL-DEFAULT(0) +, + pACKET-INTERVAL-5-MSEC(1) +, + pACKET-INTERVAL-10-MSEC(2) +, + pACKET-INTERVAL-20-MSEC(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the RTP packet rate for sample based coders (such as +G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. +0 = Default (set internally) +1 = 5 msec +2 = 10 msec +3 = 20 msec. +Access: Online. +AC INI-Param: BASICRTPPACKETINTERVAL" + ::= {acRtpRtcp 3} + + + + acRtpRtcpConnectionEstablishNotificationMode OBJECT-TYPE + SYNTAX INTEGER { + afterBrokenConnection(0) +, + uponFirstRTPFrameDetection(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the notification mode for the RTP connection establishment +event acEV_CONNECTION_ESTABLISHED. +0 = Notify only after a broken connection event +1 = Also notify when the first RTP packet is received. +Access: Online. +AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE" + ::= {acRtpRtcp 4} + + + + acRtpRtcpEnableMediaUDPChecksum OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to enable the UDP checksum calculation for +RTP media TX over IPv4. One of the following possible values: + + +0 = Disable (No checksum: UDP checksum for IPv4 TX = 0) +1 = Enable (UDP checksum will be in the UDP header upon IPv4 +TX) +. +Access: Offline. +AC INI-Param: EnableMediaUDPChecksum" + ::= {acRtpRtcp 5} + + + + acRtp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 2} + + + acRtpBaseUDPPort OBJECT-TYPE + SYNTAX Unsigned32 (1024..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the lower boundary of UDP ports to be used by the board. +The upper boundary is calculated on the basis of BoardBaseUDPPort ++ 10 * (Number of Channels). This parameter value +must be a multiple of 10. + + +. +Access: Offline. +AC INI-Param: BASEUDPPORT" + ::= {acRtp 1} + + + + acRtpComfortNoiseEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When set to 1 (Enable), SID packets are sent with the RTP SID +type (RFC 3389). +0 = Disable +1 = Enable +Determines whether Silence Indicator (SID) packets that are +sent and received are according to RFC 3389. +0 = Disabled (default). +1 = Enabled. +Note: Applicable only to MP-11x and Mediant 1000. +. +Access: Online. +AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE" + ::= {acRtp 2} + + + + acRtpEnableRFC2658Interleaving OBJECT-TYPE + SYNTAX INTEGER { + withOut-RFC2658Interleaving-And-TOC(0) +, + including-RFC2658Interleaving-And-TOC(1) +, + including-TOC-Only(2) +, + interleave-Bundling(3) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "When enabled, RTP packets include an interleaving byte for VBR +coders. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLERFC2658INTERLEAVING" + ::= {acRtp 3} + + + + acRtpRxTxMode OBJECT-TYPE + SYNTAX INTEGER { + rTPTxRx(0) +, + rTPTxOnly(1) +, + rTPRxOnly(2) +, + rTPUnactive(3) +, + rTPRxRFC2833Tx(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects which RTP directions are enabled. Both Tx and Rx sides +can be disabled. +0 = RTPTxRx +1 = RTPTxOnly +2 = RTPRxOnly +3 = RTPUnactive +4 = RTPRxRFC2833Tx. +Access: Online. +AC INI-Param: RTPDIRECTIONCONTROL" + ::= {acRtp 4} + + + + acRtpRFC2833TxPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the RFC 2833 Tx Relay RTP Payload type. + +Range = 96 to 127. +Access: Online. +AC INI-Param: RFC2833TXPAYLOADTYPE" + ::= {acRtp 5} + + + + acRtpRFC2833RxPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the RFC 2833 Rx Relay RTP Payload type. + +Range = 96 to 127. +Access: Online. +AC INI-Param: RFC2833RXPAYLOADTYPE" + ::= {acRtp 6} + + + + acRtpRedundancyPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter +'RTP Payload Type'. + +Range: 96 to 127. +Access: Online. +AC INI-Param: RFC2198PAYLOADTYPE" + ::= {acRtp 7} + + + + acRtpRedundancyDepth OBJECT-TYPE + SYNTAX Unsigned32 (0..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Redundancy depth of RFC 2198 redundancy packets. + +0 = Disabled +In Gen 3 boards: range is 0-5 +For other Gens 0-1. +Access: Online. +AC INI-Param: RTPREDUNDANCYDEPTH" + ::= {acRtp 8} + + + + acRtpPacketizationFactor OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the number of DSP payloads for generating one RTP packet. +Range = Hardware dependent. +Access: Online. +AC INI-Param: RTPPACKINGFACTOR" + ::= {acRtp 9} + + + + acRtpNoOpPayloadType OBJECT-TYPE + SYNTAX Unsigned32 (96..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "User can modify the Noop packets RTP Payload type by setting +this parameter. + +Range = 96 to 127. +Access: Online. +AC INI-Param: RTPNOOPPAYLOADTYPE" + ::= {acRtp 10} + + + + acRtpNoOpEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables / disable Noop packets sending mode. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: NoOpEnable" + ::= {acRtp 11} + + + + acRtpNoOpInterval OBJECT-TYPE + SYNTAX Unsigned32 (20..600000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to modify the Noop packets sending interval + +Parameter value is in milliseconds +Default value = 10 sec (10000 msec) + +Range = 20 to 600000 +(20 msec to 10 min - 10 min = 600000). +Access: Online. +AC INI-Param: NoOpInterval" + ::= {acRtp 12} + + + + acRtpVBRCoderHeaderFormat OBJECT-TYPE + SYNTAX INTEGER { + withOut-RFC2658Interleaving-And-TOC(0) +, + including-RFC2658Interleaving-And-TOC(1) +, + including-TOC-Only(2) +, + interleave-Bundling(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0 - payload only (no header, no toc, no m-factor) + +1- support RFC 2658 format, 1 byte for interleaving header +(always 0) and toc, no m-factor + +2 – payload including toc only, allow m-factor + +3- RFC 3358 format +. +Access: Online. +AC INI-Param: VBRCoderHeaderFormat" + ::= {acRtp 13} + + + + acRtpAMRCoderHeaderFormat OBJECT-TYPE + SYNTAX INTEGER { + cE-AMR-DEFAULT-FORMAT(0) +, + cE-AMR-RFC-3267-BUNDLING(1) +, + cE-AMR-RFC-3267-INTERLEAVING(2) +, + cE-AMR-IF2(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame +contains CRM byte and toc +RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables +RFC_3267_INTERLEAVING=2 - supported as receivers only. +Access: Online. +AC INI-Param: AMRCODERHEADERFORMAT" + ::= {acRtp 14} + + + + acRtpAMRFECRedundancyDepth OBJECT-TYPE + SYNTAX INTEGER { + cE-AMR-FEC-REDUNDANCY-LEVEL-NONE(0) +, + cE-AMR-FEC-REDUNDANCY-LEVEL-1(1) +, + cE-AMR-FEC-REDUNDANCY-LEVEL-2(2) +, + cE-AMR-FEC-REDUNDANCY-LEVEL-3(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. + +0 = No Redundancy +1 = Redundancy depth of a single packet +2 = Redundancy depth of 2 packets +3 = Redundancy depth of 3 packets +. +Access: Online. +AC INI-Param: AMRFECREDUNDANCYDEPTH" + ::= {acRtp 15} + + + + acRtpAMRFECNumOfMngtPolicyEntries OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the number of entries to be defined at the AMR management +policy table. Each entry defines the policy of a different +rate. +Access: Online. +AC INI-Param: AMRFECNUMBEROFCODECMODES" + ::= {acRtp 16} + + + + acRtpAMRFECDelayHysteresis OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the hysteresis of the Delay Threshold for AMR Hand-out +events (in msec). +Access: Online. +AC INI-Param: AMRFECDELAYHYSTERESIS" + ::= {acRtp 17} + + + + acRtpAMRFECDelayThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the one-way delay value (in msec) that may cause the +AMR Hand Out report. + +0 = 'Hand Out' report is disabled (default). +Access: Online. +AC INI-Param: AMRFECDELAYTHRESHHOLD" + ::= {acRtp 18} + + + + acRtpQcelpCoderHeaderFormat OBJECT-TYPE + SYNTAX INTEGER { + parameter-Is-Not-Used(-1) +, + including-RFC2658Interleaving-And-TOC(1) +, + including-TOC-Only(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to define a separate header format for the +QCELP coder (different to the header format of EVRC coder). +One of the following values: + +-1 - QCELP coder uses the same header format as EVRC +coder, + according to VBRCoderHeaderFormat parameter. +1 to 2 - QCELP coder uses the value defined by this parameter +to + define its header format. + +This parameter is relevant only for Control Protocol users. +TPNCP and PCI users should always use -1 value. +Access: Instant. +AC INI-Param: QcelpCoderHeaderFormat" + ::= {acRtp 19} + + + + acRtpAMROctetAlignedEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0 = disable the AMR Octet Aligned mode. + 1 = enable the AMR Octet Aligned mode. +Access: Online. +AC INI-Param: AmrOctetAlignedEnable" + ::= {acRtp 20} + + + + acAMRFECCodecPolicies OBJECT IDENTIFIER ::= {acRtp 21} + + + -- **************************************** + -- acAMRFECCodecPolicies table declaration + -- **************************************** + acAMRFECCodecPoliciesTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcAMRFECCodecPoliciesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acAMRFECCodecPolicies 1} + + + + -- **************************************** + -- acAMRFECCodecPolicies table entry + -- **************************************** + acAMRFECCodecPoliciesEntry OBJECT-TYPE + SYNTAX AcAMRFECCodecPoliciesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acAMRFECCodecPoliciesIndex} + ::= {acAMRFECCodecPoliciesTable 1} + + + + -- **************************************** + -- acAMRFECCodecPolicies TABLE + -- **************************************** + AcAMRFECCodecPoliciesEntry ::= SEQUENCE { + acAMRFECCodecPoliciesIndex Unsigned32, + acAMRFECCodecPoliciesRowStatus RowStatus, + acAMRFECCodecPoliciesRate Unsigned32, + acAMRFECCodecPoliciesRedundancyLevel Unsigned32, + acAMRFECCodecPoliciesThreshold Unsigned32, + acAMRFECCodecPoliciesHysteresis Unsigned32 + } + + + + acAMRFECCodecPoliciesIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " +AC INI-Param: AMRFECCodecPolicies_Index" + ::= {acAMRFECCodecPoliciesEntry 1} + + + + acAMRFECCodecPoliciesRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acAMRFECCodecPoliciesEntry 2} + + + + acAMRFECCodecPoliciesRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "AMR Rate x of policy x (values 0-8). +Access: Online. +AC INI-Param: AMRFECCodecPolicies_Rate" + ::= {acAMRFECCodecPoliciesEntry 3} + + + + acAMRFECCodecPoliciesRedundancyLevel OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Redundancy Level for policy x. Same values as ‘RFC 3267 Redundancy” +field. +Access: Online. +AC INI-Param: AMRFECCodecPolicies_RedundancyLevel" + ::= {acAMRFECCodecPoliciesEntry 4} + + + + acAMRFECCodecPoliciesThreshold OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "FLR (Frame Loss Ratio) threshold of policy 1. Values are taken +from 3GPP TS 44.318 (0-63). +Access: Online. +AC INI-Param: AMRFECCodecPolicies_Threshold" + ::= {acAMRFECCodecPoliciesEntry 5} + + + + acAMRFECCodecPoliciesHysteresis OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Hysteresis of FLR threshold for policy 1. Values are taken from +3GPP TS 44.318. (0-15). +Access: Online. +AC INI-Param: AMRFECCodecPolicies_Hysteresis" + ::= {acAMRFECCodecPoliciesEntry 6} + + + + acRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 3} + + + acRtcpDisableIntervalRandomization OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls whether RTCP report intervals are randomized or whether +each report interval accords exactly to the parameter defining +RTCP Mean Tx Interval (in milliseconds). +0 = Randomize +1 = Don’t Randomize. +Access: Online. +AC INI-Param: DISABLERTCPRANDOMIZE" + ::= {acRtcp 1} + + + + acRtcpXr OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 4} + + + acRtcpXrBurstThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..12) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "voice quality monitoring - excessive burst alert threshold. +if set to -1, no alerts will be issued. +Access: Online. +AC INI-Param: VQMONBURSTHR" + ::= {acRtcpXr 1} + + + + acRtcpXrDelayThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..12) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "voice quality monitoring - excessive delay alert threshold. +if set to -1, no alerts will be issued. +Access: Online. +AC INI-Param: VQMONDELAYTHR" + ::= {acRtcpXr 2} + + + + acRtcpXrEndOofCallRvalDelayThreshold OBJECT-TYPE + SYNTAX Integer32 (-1..12) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "voice quality monitoring - end of call low quality alert threshold. +if set to -1, no alerts will be issued. +Access: Online. +AC INI-Param: VQMONEOCRVALTHR" + ::= {acRtcpXr 3} + + + + acRtcpXrGMin OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "voice quality monitoring - minimum gap size (number of frames). +Access: Online. +AC INI-Param: VQMONGMIN" + ::= {acRtcpXr 4} + + + + acRtcpXrEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) +, + enableOnlyCalculation(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets voice quality monitoring (RTCP-XR) mode. + +0 = Disable +1 = Enable all +2 = Enable Only Calculation. +Access: Offline. +AC INI-Param: VQMONENABLE" + ::= {acRtcpXr 5} + + + + acVideoRtpRtcp OBJECT IDENTIFIER ::= {acMediaRtpRtcpConfig 5} + + + acVideoRtpRtcpDisableRtcpIntervalRandomization OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to enable RTCP Interval Randomization. One +of the following values: 0 Enable RTCP Interval Randomization +1 Disable RTCP Interval Randomization +. +Access: Online. +AC INI-Param: VideoDisableRtcpIntervalRandomization" + ::= {acVideoRtpRtcp 1} + + + + acVideoRtpRtcpMeanTxInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the mean interval between two transmitted RTCP packets +(milliseconds). If the interval is set to 0, no RTCP packets +are transmitted at all. +Access: Online. +AC INI-Param: VideoRtcpMeanTxInterval" + ::= {acVideoRtpRtcp 2} + + + + acVideoRtpRtcpBrokenConnectionActivationMode OBJECT-TYPE + SYNTAX INTEGER { + afterFirstIncomingRtpPacket (0) +, + onRtpStreamActivation (1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Broken connection event activation mode. +0 - Activate broken connection after the arrival of the first +RTP packet. +1 - Activate broken connection immediately after the Activate +RTP command. +. +Access: Online. +AC INI-Param: VideoBrokenConnectionActivationMode" + ::= {acVideoRtpRtcp 3} + + + + acVideoRtpRtcpBrokenConnectionEventTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Timeout that defines when broken connection event occurs. +Time resolution is 20msec. +Access: Online. +AC INI-Param: VideoBrokenConnectionEventTimeout" + ::= {acVideoRtpRtcp 4} + + + + acMediaIBSConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 5} + + + acIBS OBJECT IDENTIFIER ::= {acMediaIBSConfig 1} + + + acIBSAnalogSignalTransportType OBJECT-TYPE + SYNTAX INTEGER { + ignore(0) +, + transfer(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the analog signal transport type. +0 = Ignore +1 = Transfer hookflash via RFC 2833. +Access: Online. +AC INI-Param: ANALOGSIGNALTRANSPORTTYPE" + ::= {acIBS 1} + + + + acIBSDTMFVolume OBJECT-TYPE + SYNTAX Integer32 (-31..0) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines and controls the DTMF generation volume [-dBm]. + +Range = -31 to 0. +Access: Online. +AC INI-Param: DTMFVOLUME" + ::= {acIBS 2} + + + + acIBSDTMFTransportType OBJECT-TYPE + SYNTAX INTEGER { + acMuteDTMF(0) +, + acTransparentDTMF(2) +, + acRFC2833RelayDTMF(3) +, + acRFC2833RelayDecoderMute(7) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the type of DTMF transport. + +0 = Erase DTMFs from voice transport not relayed to remote +2 = DTMFs not erased are not relayed to remote +3 = DTMFs are muted from the voice stream and relayed according +to RFC 2833 +7 = DTMFs are sent according to RFC 2833 and muted when received. +Access: Online. +AC INI-Param: DTMFTRANSPORTTYPE" + ::= {acIBS 3} + + + + acIBSMFTransportType OBJECT-TYPE + SYNTAX INTEGER { + acMuteMF(0) +, + acTransparentMF(2) +, + acRFC2833RalayMF(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the type of MF transport. + +0 = Erase MFs from voice transport not relayed to remote +2 = MFs not erased are not relayed to remote +3 = MFs are muted from the voice stream and relayed according +to RFC 2833. +Access: Online. +AC INI-Param: MFTRANSPORTTYPE" + ::= {acIBS 4} + + + + acIBSTrunkTestingTonesEnable OBJECT-TYPE + SYNTAX INTEGER { + disables (0) +, + enables (1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables trunk testing tones. +0 = Disables trunk testing tones +1 = Enables trunk testing tones. +Access: Offline. +AC INI-Param: ENABLETRUNKTESTINGTONES" + ::= {acIBS 5} + + + + acIBSCASRelayTransportMode OBJECT-TYPE + SYNTAX INTEGER { + cASEventsOnly(0) +, + cASRFC2833Relay(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the ABCD signaling transport type over IP. + +0 = No Relay over the network +1 = Enable CAS relay according to RFC 2833. +Access: Online. +AC INI-Param: CASTRANSPORTTYPE" + ::= {acIBS 6} + + + + acIBSRxDtmfHangOverTime OBJECT-TYPE + SYNTAX Unsigned32 (0..2000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to configure the Voice Silence time (in ms units) after +playing DTMF or MF digits to the TDM side that arrived as Relay +from the Network side. + +Range from 0 to 2000, Default 1000. +Access: Online. +AC INI-Param: RxDtmfHangOverTime" + ::= {acIBS 7} + + + + acIBSTxDtmfHangOverTime OBJECT-TYPE + SYNTAX Unsigned32 (0..2000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Voice Silence time (in ms units) after detecting the end of +DTMF or MF digits at the TDM side when the DTMF Transport Type +is either Relay or Mute.This feature allows the user to configure +the silence time. +. +Access: Online. +AC INI-Param: TxDtmfHangOverTime" + ::= {acIBS 8} + + + + acIBSDTMFTwistControl OBJECT-TYPE + SYNTAX Integer32 (-10..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines a delta (in dB) between the high and low frequency component +in the DTMF signal. dB Positive values cause the higher +frequency component to be stronger than the lower one. +Negative values cause the opposite effect. For any parameter +value, both components change so that their average is constant. + +Range = -10 to 10. +Access: Offline. +AC INI-Param: DTMFGenerationTwist" + ::= {acIBS 9} + + + + acIBSNTEMaxDuration OBJECT-TYPE + SYNTAX Integer32 (-1..200000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximal time for sending NTEs (Named Telephony Events) to the +network, regardless of the time range when the TDM signal +is detected. + +-1= NTE will stop only upon detection of End event (default). +Access: Online. +AC INI-Param: NTEMaxDuration" + ::= {acIBS 10} + + + + acIBSDetectors OBJECT IDENTIFIER ::= {acMediaIBSConfig 2} + + + acIBSDetectorsMFR1Enable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of MFR1 signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: MFR1DETECTORENABLE" + ::= {acIBSDetectors 1} + + + + acIBSDetectorsMFR2ForwardEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of MFR2 forward signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: MFR2FORWARDDETECTORENABLE" + ::= {acIBSDetectors 2} + + + + acIBSDetectorsMFR2BackwardEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of MFR2 backward signaling. +Access: Online. +AC INI-Param: MFR2BACKWARDDETECTORENABLE" + ::= {acIBSDetectors 3} + + + + acIBSDetectorsR1LineEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of Line signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: R1LINEDETECTORENABLE" + ::= {acIBSDetectors 4} + + + + acIBSDetectorsR2LineEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of Line signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: R2LINEDETECTORENABLE" + ::= {acIBSDetectors 5} + + + + acIBSDetectorsAC15Enable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of Line signaling. +Access: Online. +AC INI-Param: AC15DETECTORENABLE" + ::= {acIBSDetectors 6} + + + + acIBSDetectorsDTMFEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of DTMF signaling. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: DTMFDETECTORENABLE" + ::= {acIBSDetectors 7} + + + + acIBSDetectorsCallProgressEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of Call Progress Tones. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: CALLPROGRESSDETECTORENABLE" + ::= {acIBSDetectors 8} + + + + acIBSDetectorsUserDefinedToneEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of User Defined Tones signaling. + +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: USERDEFINEDTONEDETECTORENABLE" + ::= {acIBSDetectors 9} + + + + acIBSDetectorsDetectionRedirection OBJECT-TYPE + SYNTAX INTEGER { + pcm(0) +, + network(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the IBS (In-Band Signaling) Detection Direction. + + +0 = PCM +1 = Network. +Access: Online. +AC INI-Param: IBSDETECTIONREDIRECTION" + ::= {acIBSDetectors 10} + + + + acIBSDetectorsSS4Enable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of Line signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: SS4DETECTORENABLE" + ::= {acIBSDetectors 11} + + + + acIBSDetectorsMFSS5Enable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables detection of MF SS5 line signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: MFSS5DETECTORENABLE" + ::= {acIBSDetectors 12} + + + + acIBSDetectorsSS5Enable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Detection of Line signaling. +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: SS5DETECTORENABLE" + ::= {acIBSDetectors 13} + + + + acIBSDetectorsSITEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables SIT (Special Information Tone) detection +according to the ITU-T recommendation E.180/Q.35. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: SITDETECTORENABLE" + ::= {acIBSDetectors 14} + + + + acIBSDetectorsCOTEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Continuity Test tone detection and generation +according to the ITU-T Q.724 recommendation. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: ENABLECONTINUITYTONES" + ::= {acIBSDetectors 15} + + + + acIBSDetectorsR1DetectionStandard OBJECT-TYPE + SYNTAX INTEGER { + mfR1DetectionStandardItu (0) +, + mfR1DetectionStandardR15 (1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter determines which one of the R1 MF protocol flavors +will be used for detection. + +0 = ITU +1 = R1.5. +Access: Offline. +AC INI-Param: R1DetectionStandard" + ::= {acIBSDetectors 16} + + + + acIBSDetectorsUDTDetectorFrequencyDeviation OBJECT-TYPE + SYNTAX Unsigned32 (1..50) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the deviation allowed for the detection of each signal +frequency. Units are in Hertz. +Valid values range 1-50. +Default value 50 Hz. +. +Access: Offline. +AC INI-Param: UDTDETECTORFREQUENCYDEVIATION" + ::= {acIBSDetectors 17} + + + + acIBSDetectorsCPTDetectorFrequencyDeviation OBJECT-TYPE + SYNTAX Unsigned32 (1..30) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the deviation allowed for the detection of each CPT +signal frequency. Units are in Hertz. +Valid values range 1-30. +Default value 10 Hz. +. +Access: Offline. +AC INI-Param: CPTDETECTORFREQUENCYDEVIATION" + ::= {acIBSDetectors 18} + + + + acIPMediaConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 6} + + + acIPMedia OBJECT IDENTIFIER ::= {acIPMediaConfig 1} + + + acIPMediaDSPDetectorsEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables DSP IP Media Detectors. Enabling this parameter +might reduce the board channel capacity. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: ENABLEDSPIPMDETECTORS" + ::= {acIPMedia 1} + + + + acIPMediaEnableMCApplication OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables media control functionality. +Access: Offline. +AC INI-Param: ENABLEMEDIACONTROL" + ::= {acIPMedia 2} + + + + acIPMAnswerDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 2} + + + acIPMAnswerDetectorEnable OBJECT-TYPE + SYNTAX INTEGER { + no(0) +, + yes(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables activation of the AD (Answer Detector). +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLEANSWERDETECTOR" + ::= {acIPMAnswerDetector 1} + + + + acIPMAnswerDetectorActivityDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls (in 100 msec resolution) the time between sending Activation +command (AnswerDetector = 1) and the time that the +detector actually starts to work. +Range = 0 to 0x3FF. +Access: Online. +AC INI-Param: ANSWERDETECTORACTIVITYDELAY" + ::= {acIPMAnswerDetector 2} + + + + acIPMAnswerDetectorSilenceTime OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter controls the silence time period (in 100 msec +resolution) from no speech input until the END_OF_SPEECH event +is sent. +10 = 1 second +Range = 0 to 0x3FF. +Access: Online. +AC INI-Param: ANSWERDETECTORSILENCETIME" + ::= {acIPMAnswerDetector 3} + + + + acIPMAnswerDetectorRedirection OBJECT-TYPE + SYNTAX INTEGER { + speechPCMSideDetected(0) +, + speechIPSideDetected(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AD (Answer Detector) Redirection. +0 (PCM) = Speech from the PCM side is detected +1 (Network) = Speech from the IP side is detected. +Access: Online. +AC INI-Param: ANSWERDETECTORREDIRECTION" + ::= {acIPMAnswerDetector 4} + + + + acIPMAnswerDetectorSensitivity OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the AD (Answer Detector) sensitivity. + +The allowed values are different for different boards: +DSP Gen2-based products: range 0 - 2, default 0. +DSP Gen2-based products: range 0 - 7, default 3. + +Lowest value matches highest sensitivity and vice versa. +Access: Online. +AC INI-Param: ANSWERDETECTORSENSITIVITY" + ::= {acIPMAnswerDetector 5} + + + + acIPMEnergyDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 3} + + + acIPMEnergyDetectorEnable OBJECT-TYPE + SYNTAX INTEGER { + no(0) +, + yes(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Activates the ED (Energy Detector). +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLEENERGYDETECTOR" + ::= {acIPMEnergyDetector 1} + + + + acIPMEnergyDetectorQualityFactor OBJECT-TYPE + SYNTAX Unsigned32 (0..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the ED's (Energy Detector's) sensitivity (0 -10). + +0 = Insensitive +10 = Most Sensitive + +Range = 0 to 10. +Access: Online. +AC INI-Param: ENERGYDETECTORQUALITYFACTOR" + ::= {acIPMEnergyDetector 2} + + + + acIPMEnergyDetectorThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ED's (Energy Detector's) threshold. A signal exceeding +the threshold invokes an 'Above' or 'Below' event. +ActualThreshold = -44 dBm + (EDThreshold * 6) +Default = 3 = -26 dBm + +Range: 0 to 7. +Access: Online. +AC INI-Param: ENERGYDETECTORTHRESHOLD" + ::= {acIPMEnergyDetector 3} + + + + acIPMEnergyDetectorEnergyRedirection OBJECT-TYPE + SYNTAX INTEGER { + tDM(0) +, + network(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the direction of the energy detection. +0 = Detect from the TDM side +1 = Detect from the network side. +Access: Online. +AC INI-Param: ENERGYDETECTORREDIRECTION" + ::= {acIPMEnergyDetector 4} + + + + acIPMediaPatternDetector OBJECT IDENTIFIER ::= {acIPMediaConfig 4} + + + acIPMediaPatternDetectorEnable OBJECT-TYPE + SYNTAX INTEGER { + no(0) +, + yes(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables activation of the PD (Pattern Detector). +0 = Disable +1 = Enable. +Access: Online. +AC INI-Param: ENABLEPATTERNDETECTOR" + ::= {acIPMediaPatternDetector 1} + + + + acIPMediaPatternDetectorDetectionThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the number of consecutive patterns to trigger the pattern +detection event. + +Range = 0 to 31. +Access: Offline. +AC INI-Param: PDTHRESHOLD" + ::= {acIPMediaPatternDetector 2} + + + + acIPMediaAMD OBJECT IDENTIFIER ::= {acIPMediaConfig 5} + + + acIPMediaAMDDetectionDirection OBJECT-TYPE + SYNTAX INTEGER { + acAmdTdmDetection(0) +, + acAmdNetworkDetection(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) detection direction. + +One of the following values: + +0 = Detection from the TDM side +1 = Detection from the Network side. +Access: Online. +AC INI-Param: AMDDETECTIONDIRECTION" + ::= {acIPMediaAMD 1} + + + + acIPMediaAMDSensitivity OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) detection sensitivity: + +0 = Best detection of an answering machine +7 = Best detection of a live call. +Access: Online. +AC INI-Param: AMDDetectionSensitivity" + ::= {acIPMediaAMD 2} + + + + acIPMediaAMDDetectionSensitivityHighResolution OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) high resolution +detection sensitivity. +The high resolution has 16 levels of sensitivity while the +normal resolution (Answer Machine Detector Sensitivity) has +8 levels. + +0 = Best detection of an answering machine +15 = Best detection of a live call. +Access: Online. +AC INI-Param: AMDSensitivityLevel" + ::= {acIPMediaAMD 3} + + + + acIPMediaAMDSensitivityResolution OBJECT-TYPE + SYNTAX INTEGER { + normal(0) +, + high(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) detection sensitivity +resolution: + +0 = Normal detection sensitivity resolution (8 sensitivity +levels) +1 = High detection sensitivity resolution (16 sensitivity levels). +Access: Online. +AC INI-Param: AMDSensitivityParameterSuit" + ::= {acIPMediaAMD 4} + + + + acIPMediaAMDBeepDetectionTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0..1638) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) Beep detection +timeout. + +Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). +Access: Online. +AC INI-Param: AMDBeepDetectionTimeout" + ::= {acIPMediaAMD 5} + + + + acIPMediaAMDBeepDetectionSensitivity OBJECT-TYPE + SYNTAX Unsigned32 (0..3) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) Beep detection +sensitivity. + +0 - Least sensitive. +3 - Most sensitive. +Access: Online. +AC INI-Param: AMDBeepDetectionSensitivity" + ::= {acIPMediaAMD 6} + + + + acIPMediaAMDSensitivityParameterSuit OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the serial number of the AMD (Answer Machine Detector) +parameter suit: +0 = USA Parameter Suit with normal detection sensitivity resolution +(8 sensitivity levels) +1 = USA Parameter Suit with high detection sensitivity resolution +(16 sensitivity levels) +2-7 : other countries parameter suits with up to 16 sensitivity +levels. +Access: Online. +AC INI-Param: AMDSensitivityParameterSuit" + ::= {acIPMediaAMD 7} + + + + acIPMediaAMDSensitivityLevel OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the AMD (Answer Machine Detector) level of detection +sensitivity. +It has 16 levels of sensitivity : +0 = Best detection of an answering machine +15 = Best detection of a live call. +Access: Online. +AC INI-Param: AMDSensitivityLevel" + ::= {acIPMediaAMD 8} + + + + acIPMConference OBJECT IDENTIFIER ::= {acIPMediaConfig 6} + + + acIPMConferenceGASNMinInterval OBJECT-TYPE + SYNTAX Unsigned32 (10..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimum interval between Active Speaker Notification (ASN) events. +An ASN event reports on the active speakers in a conference. +The event is issued whenever the active speakers change. +units = 100 ms +Minimum configurable interval between events is 500 ms (5 units). +Access: Instant. +AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL" + ::= {acIPMConference 1} + + + + acIPMConferenceEnergythreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..39) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Conference - Minimum energy level for a user to be included +in Active Speaker Notification (ASN) events (units: -dBm). + +Valid range 0 to (-39) dbm. +Access: Instant. +AC INI-Param: ActiveSpeakerEnergyThreshold" + ::= {acIPMConference 2} + + + + acIPMConferenceEnableHDConference OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable\Disable HD Conference. +Access: Offline. +AC INI-Param: EnableHDConference" + ::= {acIPMConference 3} + + + + acIPMVideoConference OBJECT IDENTIFIER ::= {acIPMediaConfig 7} + + + acIPMVideoConferenceSwitchingInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the video view rotation interval in seconds. Applicable +when using timer trigger switching mode. +Access: Online. +AC INI-Param: VideoConferenceSwitchingInterval" + ::= {acIPMVideoConference 1} + + + + acIPMVideoConferenceEnableActiveSpeakerHighlight OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Highlights the speaker for participants viewing a symmetric +layout (2x2 or 3x3) . +0 - Don't highlight active speaker. +1 - Highlight active speaker. +Access: Online. +AC INI-Param: VideoEnableActiveSpeakerHighlight" + ::= {acIPMVideoConference 2} + + + + acIPMVideoConferenceParticipantType OBJECT-TYPE + SYNTAX INTEGER { + regular(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates a participant's capabilities in the conference. +Regular (2) – Regular participant who is able to both send +and receive video. +. +Access: Online. +AC INI-Param: VideoConferenceParticipantType" + ::= {acIPMVideoConference 3} + + + + acIPMVideoConferenceParticipantTriggerMode OBJECT-TYPE + SYNTAX INTEGER { + triggerMode-Speaker(0) +, + triggerMode-Timer(1) +, + triggerMode-Fixed(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Participant trigger mode defines the trigger for modifying the +participant's view. +Voice Activated Video Switch (0) – A participant’s view will +be changed according to the active speakers’ detection. +Timer (1) – A participant’s view is rotated every configured +time among the different video participants in the conference. +Fixed (3) – A participant’s view is fixed. +. +Access: Online. +AC INI-Param: VideoConferenceParticipantTriggerMode" + ::= {acIPMVideoConference 4} + + + + acIPMVideoConferenceParticipantLayout OBJECT-TYPE + SYNTAX INTEGER { + layout-1XUSER(0) +, + layout-2x2-USERS(1) +, + layout-3x3-USERS(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the participant's view layout. +1 user (0). +2*2 users (1). All same size. +3*3 users (2). All same size. + + +. +Access: Online. +AC INI-Param: VideoConferenceParticipantLayout" + ::= {acIPMVideoConference 5} + + + + acIPMVideoConferenceEnableConferenceParticipantSelfView OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Self view indication. +0 - The participant cannot view himself +1 - The participant can view himself. +Access: Online. +AC INI-Param: VideoEnableConferenceParticipantSelfView" + ::= {acIPMVideoConference 6} + + + + acMediaCallerIDConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 7} + + + acCallerID OBJECT IDENTIFIER ::= {acMediaCallerIDConfig 1} + + + acCallerIDTypes OBJECT-TYPE + SYNTAX INTEGER { + bellcore (0) +, + eTSI (1) +, + nTT (2) +, + bT (4) +, + dTMF-Based-ETSI (16) +, + denmark (17) +, + indian (18) +, + brazilian (19) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the supported Caller ID standard. +0 = Bellcore +1 = ETSI +2 = NTT +4 = British +16 = ETSI_ETS +17 = Denmark +18 = Indian +19 = Brazilian. +Access: Online. +AC INI-Param: CALLERIDTYPE" + ::= {acCallerID 1} + + + + acCallerIDTransportType OBJECT-TYPE + SYNTAX INTEGER { + callerID-DISABLE(0) +, + callerID-RELAY(1) +, + callerID-MUTE(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the CallerID Transport type. + +0 = Disable +1 = Relay +3 = Mute. +Access: Online. +AC INI-Param: CallerIDTransportType" + ::= {acCallerID 2} + + + + acCallerIDDTMFBasedMaxDigits OBJECT-TYPE + SYNTAX Unsigned32 (0..26) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the maximum number of DTMF digits in a DTMF-based +Caller ID string. + +Range = 0 to 26. +Access: Online. +AC INI-Param: MAXDTMFDIGITSINCIDSTRING" + ::= {acCallerID 3} + + + + acCallerIDDTMFBasedMinDigits OBJECT-TYPE + SYNTAX Unsigned32 (0..26) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the mimumum number of DTMF digits in a DTMF-based +Caller ID string. + +Range = 0 to 26. +Access: Online. +AC INI-Param: MINDTMFDIGITSINCIDSTRING" + ::= {acCallerID 4} + + + + acCallerIDNTTDIDSignallingForm OBJECT-TYPE + SYNTAX INTEGER { + nttDidFskSignalling (0) +, + nttDidDtmfBasedSignalling (1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the signalling format used when generating an NTT +DID. + +0 = FSK Siganl +1 = DTMF Based Signal. +Access: Online. +AC INI-Param: NTTDIDSignallingForm" + ::= {acCallerID 5} + + + + acMediaNetworkConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 8} + + + acMediaNetwork OBJECT IDENTIFIER ::= {acMediaNetworkConfig 1} + + + acMediaNetworkDisableNAT OBJECT-TYPE + SYNTAX INTEGER { + no(0) +, + yes(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the NAT feature. +0 = Do not disable NAT +1 = Disable NAT. +Access: Online. +AC INI-Param: DISABLENAT" + ::= {acMediaNetwork 1} + + + + acMediaNetworkRtpIpTos OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets value of IP Type Of Service field in IP header for all +packets generated from this channel. Follow the acTIPTOS enumeration. +Access: Instant. +AC INI-Param: IPTOS" + ::= {acMediaNetwork 2} + + + + acMediaNetworkRtpIpPrecedence OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets value of the IP precedence field in the IP header for all +packets generated from this channel. Follow the acTIPPrecedence +enumeration. +Access: Instant. +AC INI-Param: IPPRECEDENCE" + ::= {acMediaNetwork 3} + + + + acMediaNetworkIPDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Defines the value of the 'DiffServ' field in the IP header for +media (RTP) traffic. + +Range: 0 to 63. +Access: Instant. +AC INI-Param: IPDIFFSERV" + ::= {acMediaNetwork 4} + + + + acMediaNetworkInboundLatchMode OBJECT-TYPE + SYNTAX INTEGER { + strict(0) +, + dynamic(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the way of handling incoming media packets from +non-expected address/port. +Access: Online. +AC INI-Param: InboundMediaLatchMode" + ::= {acMediaNetwork 5} + + + + acMediaJBConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 9} + + + acJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 1} + + + acJitterBufferMinDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..150) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Dynamic Jitter Buffer Minimum Delay (in msec). + +Recommended value for a regular voice call is 10. +Access: Online. +AC INI-Param: DJBUFMINDELAY" + ::= {acJitterBuffer 1} + + + + acJitterBufferOptFactor OBJECT-TYPE + SYNTAX Unsigned32 (0..13) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Dynamic Jitter Buffer frame error/delay optimization. +Recommended value for a regular voice call is 10. +Access: Online. +AC INI-Param: DJBUFOPTFACTOR" + ::= {acJitterBuffer 2} + + + + acVideoJitterBuffer OBJECT IDENTIFIER ::= {acMediaJBConfig 2} + + + acVideoJitterBufferMinDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..500) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Jitter buffer minimum delay in milliseconds. Must be less than +JitterBufferMaxDelay. +Access: Online. +AC INI-Param: VideoJitterBufferMinDelay" + ::= {acVideoJitterBuffer 1} + + + + acVideoJitterBufferMaxDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..500) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Jitter buffer maximum delay in milliseconds. +Access: Online. +AC INI-Param: VideoJitterBufferMaxDelay" + ::= {acVideoJitterBuffer 2} + + + + acVideoJitterBufferDJBOptimizationFactor OBJECT-TYPE + SYNTAX Unsigned32 (0..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "JB Optimization Factor controls the jitter buffer's adaptation +rates + A High factor means fast adaptation when jitter increases, +and a slow adaptation when jitter decrease. +Small factor means slow adaptation when jitter increases, and +a fast adaptation when jitter decreases. +. +Access: Online. +AC INI-Param: VideoDJBOptimizationFactor" + ::= {acVideoJitterBuffer 3} + + + + acMediaStatus OBJECT IDENTIFIER ::= {acMedia 2} + + + acMediaAggregation OBJECT IDENTIFIER ::= {acMediaConfiguration 10} + + + acMediaAggregationRemoteBaseUDPPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Remote Base UDP Port For Aggrigation. +Access: Offline. +AC INI-Param: REMOTEBASEUDPPORT" + ::= {acMediaAggregation 1} + + + + acMediaAggregationL1L1ComplexRxUDPPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The UDP port for the incoming (from the remote side) and the +outgoing (destination UDP) packets, for Complex Multiplexed +RTP mode. +Access: Offline. +AC INI-Param: L1L1ComplexRxUDPPort" + ::= {acMediaAggregation 2} + + + + acMediaAggregationL1L1ComplexTxUDPPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Source UDP port for the outgoing UDP Multiplexed RTP packets, +for Complex-Multiplex RTP mode. +Access: Offline. +AC INI-Param: L1L1ComplexTxUDPPort" + ::= {acMediaAggregation 3} + + + + acIPLegs OBJECT IDENTIFIER ::= {acMediaStatus 1} + + + -- **************************************** + -- acIPLegs table declaration + -- **************************************** + acIPLegsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcIPLegsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acIPLegs 1} + + + + -- **************************************** + -- acIPLegs table entry + -- **************************************** + acIPLegsEntry OBJECT-TYPE + SYNTAX AcIPLegsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acIPLegsLegIndex} + ::= {acIPLegsTable 1} + + + + -- **************************************** + -- acIPLegs TABLE + -- **************************************** + AcIPLegsEntry ::= SEQUENCE { + acIPLegsLegIndex Unsigned32, + acIPLegsCallIndex Unsigned32, + acIPLegsRTPActive INTEGER, + acIPLegsCoderType INTEGER, + acIPLegsSilenceCompression INTEGER, + acIPLegsDTMFDetection INTEGER, + acIPLegsLocalRTPPort Unsigned32, + acIPLegsRemoteRTPAddress IpAddress, + acIPLegsFaxTransportType INTEGER, + acIPLegsRxPackets Unsigned32, + acIPLegsTxPackets Unsigned32, + acIPLegsRxBytes Unsigned32, + acIPLegsTxBytes Unsigned32, + acIPLegsJitter Unsigned32, + acIPLegsPacketLoss Unsigned32, + acIPLegsSSRCOfSender Unsigned32, + acIPLegsDSPDevice Unsigned32, + acIPLegsLegName SnmpAdminString + } + + + + acIPLegsLegIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..5000) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Describes Rtp Endpoint In A Specific Call. +AC INI-Param: N/A" + ::= {acIPLegsEntry 1} + + + + acIPLegsCallIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..5000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Decribes The Call which The Rtp EndPoint Participant In It. +AC INI-Param: N/A" + ::= {acIPLegsEntry 2} + + + + acIPLegsRTPActive OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Decribes whether the RTP is active or not. +AC INI-Param: N/A" + ::= {acIPLegsEntry 3} + + + + acIPLegsCoderType OBJECT-TYPE + SYNTAX INTEGER { + acG711Alaw-64(0) +, + acG711Mulaw(1) +, + acG726-16(2) +, + acG726-24(3) +, + acG726-32 (4) +, + acG726-40(5) +, + acG727-16(6) +, + acG727-24-16(7) +, + acG727-24(8) +, + acG727-32-16(9) +, + acG727-32-24(10) +, + acG727-32(11) +, + acG727-40-16(12) +, + acG727-40-24(13) +, + acG727-40-32(14) +, + acG723Low(15) +, + acG723High(16) +, + acG729(17) +, + acGSM610(18) +, + vacGSM610MS(20) +, + acGSM-EFR(21) +, + acTransparent(22) +, + acG728(23) +, + acNetCoder-4-8(25) +, + acNetCoder-5-6(26) +, + acNetCoder-6-4(27) +, + acNetCoder-7-2(28) +, + acNetCoder-8(29) +, + acNetCoder-8-8(30) +, + acNetCoder-9-(31) +, + acEVRC(32) +, + acEVRC-TFO(33) +, + acQCELP-8(34) +, + acQCELP-8-TFO(35) +, + acQCELP-13(36) +, + acQCELP-13-TFO(37) +, + acEVRC-TTY(38) +, + acNoCoder(40) +, + acModemAnswer(41) +, + acModemCall(42) +, + acVoxADPCM(43) +, + acG711Alaw-5-5(45) +, + acG711Mulaw-5-5(46) +, + acG726-32-5-5(47) +, + acG729E(48) +, + acLinearPCM(49) +, + acAMR-4-7(50) +, + acAMR-5-15(51) +, + acAMR-5-9(52) +, + acAMR-6-7(53) +, + acAMR-7-4(54) +, + acAMR-7-95(55) +, + acAMR-10-2(56) +, + acAMR-12-2(57) +, + acEVRC-B(58) +, + acEVRC-TFOV(60) +, + acQCELP-8-TFOV(61) +, + acQCELP-13-TFOV(62) +, + acILBC-15(63) +, + acILBC-13(64) +, + acBV-16(65) +, + acAMRWB-6-6(66) +, + acAMRWB-8-85(67) +, + acAMRWB-12-65(68) +, + acAMRWB-14-25(69) +, + acAMRWB-15-85(70) +, + acAMRWB-18-25(71) +, + acAMRWB-19-85(72) +, + acAMRWB-23-05(73) +, + acAMRWB-23-85(74) +, + acG722-48K(75) +, + acG722-56K(76) +, + acG722-64K(77) +, + acDPNSSCoder(78) +, + acEG711Alaw-10ms(80) +, + acEG711Alaw-20ms(81) +, + acEG711Alaw-30ms(82) +, + acEG711Mulaw-10ms(83) +, + acEG711Mulaw-20ms(84) +, + acEG711Mulaw-30ms(85) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "describes the coder Type. +AC INI-Param: N/A" + ::= {acIPLegsEntry 4} + + + + acIPLegsSilenceCompression OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enables or Disables the Silence Compression. +AC INI-Param: N/A" + ::= {acIPLegsEntry 5} + + + + acIPLegsDTMFDetection OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Enables or Disables the DTMF Detection. +AC INI-Param: N/A" + ::= {acIPLegsEntry 6} + + + + acIPLegsLocalRTPPort OBJECT-TYPE + SYNTAX Unsigned32 (0..20000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the RTP port of the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 7} + + + + acIPLegsRemoteRTPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the RTP address. +AC INI-Param: N/A" + ::= {acIPLegsEntry 8} + + + + acIPLegsFaxTransportType OBJECT-TYPE + SYNTAX INTEGER { + transparent(0) +, + relay(1) +, + bypass(2) +, + withevents(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Fax transfor Type currently working. +AC INI-Param: N/A" + ::= {acIPLegsEntry 9} + + + + acIPLegsRxPackets OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the received packets on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 10} + + + + acIPLegsTxPackets OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Transmitted packets on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 11} + + + + acIPLegsRxBytes OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the received Bytes on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 12} + + + + acIPLegsTxBytes OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Transmitted packets on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 13} + + + + acIPLegsJitter OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Jitter on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 14} + + + + acIPLegsPacketLoss OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Lost packets on the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 15} + + + + acIPLegsSSRCOfSender OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the SSRC Of the Sender. +AC INI-Param: N/A" + ::= {acIPLegsEntry 16} + + + + acIPLegsDSPDevice OBJECT-TYPE + SYNTAX Unsigned32 (0..2000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the DSP Device Of the Leg. +AC INI-Param: N/A" + ::= {acIPLegsEntry 17} + + + + acIPLegsLegName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes the Leg Name as in the Control Protocol. +AC INI-Param: N/A" + ::= {acIPLegsEntry 18} + + + + acStreamingCache OBJECT IDENTIFIER ::= {acMediaConfiguration 11} + + + acStreamingCacheSize OBJECT-TYPE + SYNTAX Unsigned32 (0..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the streaming cache size in MBs. +The remaining size (out of 32MBs) is used as VoicePrompt storage. +Access: Offline. +AC INI-Param: gStreamingCacheSize" + ::= {acStreamingCache 1} + + + + acStreamingCacheRefreshTime OBJECT-TYPE + SYNTAX Integer32 (-1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the streaming cache data refresh time in minutes. If +-1 is set, refresh is off. +Access: Offline. +AC INI-Param: gStreamingCacheRefreshTime" + ::= {acStreamingCache 2} + + + + acStreamingCacheClearService OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "reset the streaming cache. +Access: Instant. +AC INI-Param: N/A" + ::= {acStreamingCache 3} + + + + acMediaVideoConfig OBJECT IDENTIFIER ::= {acMediaConfiguration 12} + + + acMediaVideoConfigEncoderIntraInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the frequency for the number of frames at which the encoder +outputs an Intra frame. +Access: Online. +AC INI-Param: VideoEncoderIntraInterval" + ::= {acMediaVideoConfig 1} + + + + acMediaVideoConfigMaxPacketSize OBJECT-TYPE + SYNTAX Unsigned32 (1..1400) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the maximum packet size in bytes. +Access: Online. +AC INI-Param: VideoMaxPacketSize" + ::= {acMediaVideoConfig 2} + + + + acMediaVideoConfigTargetBitrate OBJECT-TYPE + SYNTAX Unsigned32 (1..384) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the target output bit rate. +Access: Online. +AC INI-Param: VideoTargetBitrate" + ::= {acMediaVideoConfig 3} + + + + acMediaVideoConfigQualityParameterForRateControl OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This value determines the trade off between video quality and +frame rate. A low value indicates a higher quality with a +lower frame rate and vice versa. +Access: Online. +AC INI-Param: VideoQualityParameterForRateControl" + ::= {acMediaVideoConfig 4} + + + + acMediaVideoConfigRateControlType OBJECT-TYPE + SYNTAX INTEGER { + ceVideoConstantBitRate (0) +, + ceVideoVaribleBitRate(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets bitrate output to either a constant or a variable bit rate. + +CBR (0) – Constant Bit Rate. +VBR (1) – Variable Bit Rate. Target Bitrate indicates the target +average output bit rate. +. +Access: Online. +AC INI-Param: VideoRateControlType" + ::= {acMediaVideoConfig 5} + + + + acMediaVideoConfigEnableReSyncHeader OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether to add a video packet header to every packet +in order to increase error resilience. +0 - Disable +1 - Enable. +Access: Online. +AC INI-Param: VideoEnableReSyncHeader" + ::= {acMediaVideoConfig 6} + + + + acMediaVideoConfigEnableAudioVideoSynchronization OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to enable audio and video synchronization. +0 - No synchronization between audio and video streams +1 - Synchronization between audio and video streams + +. +Access: Online. +AC INI-Param: EnableAudioVideoSynchronization" + ::= {acMediaVideoConfig 7} + + + + acIPMediaChannels OBJECT IDENTIFIER ::= {acMediaConfiguration 13} + + + acIPMediaChannelsEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Whether to enable DSP channels reservation for IPmedia support. +Relevant for Mediant 1000 board only. One of the following +possible + +0 = Disable +1 - Enable. +Access: Offline. +AC INI-Param: EnableIPMediaChannels" + ::= {acIPMediaChannels 1} + + + + -- **************************************** + -- acIPMediaChannelsResources table declaration + -- **************************************** + acIPMediaChannelsResourcesTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcIPMediaChannelsResourcesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPMedia channels info" + ::= {acIPMediaChannels 21} + + + + -- **************************************** + -- acIPMediaChannelsResources table entry + -- **************************************** + acIPMediaChannelsResourcesEntry OBJECT-TYPE + SYNTAX AcIPMediaChannelsResourcesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acIPMediaChannelsResourcesIndex} + ::= {acIPMediaChannelsResourcesTable 1} + + + + -- **************************************** + -- acIPMediaChannelsResources TABLE + -- **************************************** + AcIPMediaChannelsResourcesEntry ::= SEQUENCE { + acIPMediaChannelsResourcesIndex Unsigned32, + acIPMediaChannelsResourcesRowStatus RowStatus, + acIPMediaChannelsResourcesAction INTEGER, + acIPMediaChannelsResourcesActionRes INTEGER, + acIPMediaChannelsResourcesModuleID Unsigned32, + acIPMediaChannelsResourcesDSPChannelsReserved Unsigned32 + } + + + + acIPMediaChannelsResourcesIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..5) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: IPMediaChannels_Index" + ::= {acIPMediaChannelsResourcesEntry 1} + + + + acIPMediaChannelsResourcesRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: N/A" + ::= {acIPMediaChannelsResourcesEntry 2} + + + + acIPMediaChannelsResourcesAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: N/A" + ::= {acIPMediaChannelsResourcesEntry 3} + + + + acIPMediaChannelsResourcesActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: N/A" + ::= {acIPMediaChannelsResourcesEntry 4} + + + + acIPMediaChannelsResourcesModuleID OBJECT-TYPE + SYNTAX Unsigned32 (0..6) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Refers to M1K board only, module at which slot. +Access: Offline. +AC INI-Param: IPMediaChannels_ModuleID" + ::= {acIPMediaChannelsResourcesEntry 5} + + + + acIPMediaChannelsResourcesDSPChannelsReserved OBJECT-TYPE + SYNTAX Unsigned32 (0..10000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "How many DSP channels reserve for IPMedia channels. +Access: Offline. +AC INI-Param: IPMediaChannels_DSPChannelsReserved" + ::= {acIPMediaChannelsResourcesEntry 6} + + + + acAcousticEchoSuppressor OBJECT IDENTIFIER ::= {acMediaConfiguration 14} + + + acAcousticEchoSuppressorEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable support of network echo suppressor on board level. Reduces +board resource capacity. +Access: Offline. +AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT" + ::= {acAcousticEchoSuppressor 1} + + + + acAcousticEchoSuppressorEchoCancellerType OBJECT-TYPE + SYNTAX INTEGER { + lineEchoCanceller(0) +, + acousticEchoSuppressorNetwork(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Echo Canceller type. Line echo canceller for TDM Side or acoustic +echo suppressor on network side. +Access: Online. +AC INI-Param: ECHOCANCELLERTYPE" + ::= {acAcousticEchoSuppressor 2} + + + + acAcousticEchoSuppressorAttenuationIntensity OBJECT-TYPE + SYNTAX Unsigned32 (0..3) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Acoustic echo suppressor attenuation intensity. intensity of +attenuation on signals identified as echo. +Access: Online. +AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY" + ::= {acAcousticEchoSuppressor 3} + + + + acAcousticEchoSuppressorMaxERLThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Acoustic echo suppressor max ERL threshold in DB. Max ratio +between signal level and retruned echo from phone. +Access: Online. +AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD" + ::= {acAcousticEchoSuppressor 4} + + + + acAcousticEchoSuppressorMinReferenceDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Acoustic echo suppressor MIN reference delay in mSec. The reference +delay in the network helps echo suppression algorithm +to identify echo signals. The entered value will be multiplied +by 10. +Access: Online. +AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS" + ::= {acAcousticEchoSuppressor 5} + + + + acAcousticEchoSuppressorMaxReferenceDelay OBJECT-TYPE + SYNTAX Unsigned32 (0..40) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Acoustic echo suppressor MAX reference delay. The reference +delay in the network helps echo suppression algorithm to identify +echo signals. The entered value will be multiplied by +10. +Access: Online. +AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS" + ::= {acAcousticEchoSuppressor 6} + + + + + +END -- cgit v1.2.3