From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/audiocodes/RTCP-XR-MIB | 1903 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1903 insertions(+) create mode 100644 MIBS/audiocodes/RTCP-XR-MIB (limited to 'MIBS/audiocodes/RTCP-XR-MIB') diff --git a/MIBS/audiocodes/RTCP-XR-MIB b/MIBS/audiocodes/RTCP-XR-MIB new file mode 100644 index 0000000..d5b427a --- /dev/null +++ b/MIBS/audiocodes/RTCP-XR-MIB @@ -0,0 +1,1903 @@ +RTCPXR-MIB DEFINITIONS ::= BEGIN +IMPORTS + mib-2, MODULE-IDENTITY, NOTIFICATION-TYPE, + OBJECT-TYPE, Unsigned32, Integer32, + Gauge32, Counter32 FROM SNMPv2-SMI + OBJECT-GROUP, MODULE-COMPLIANCE, + NOTIFICATION-GROUP FROM SNMPv2-CONF + TEXTUAL-CONVENTION, RowPointer, TimeStamp + FROM SNMPv2-TC + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + InetAddressType, InetAddress, + InetPortNumber FROM INET-ADDRESS-MIB; + --ItuPerceivedSeverity FROM IANA-ITU-ALARM-TC-MIB; + + +rtcpXrMIB MODULE-IDENTITY + LAST-UPDATED "200502200000Z" + ORGANIZATION + "IETF AVT Working Group" + CONTACT-INFO + "IETF AVT Working Group + Chairs: Colin Perkins, Magnus Westerlund + Working Group Email: avt@ietf.org + + Editors: Alan Clark + Telchemy + Email: alan@telchemy.com + + Amy Pendleton + Nortel Networks + Email: aspen@nortelnetworks.com" + DESCRIPTION + "RTCP Extended Reports MIB + Copyright (c) The Internet Society (2005) + This version of the MIB module is part of + RFC nnnn and is based on RFC3611." + + REVISION "200502200000Z" + DESCRIPTION + "Initial version, published as RFC nnnn" + +-- RFC Ed: replace nnnn (2 occurrences) with the actual RFC number and +-- remove this notice + +::= { mib-2 255 } + +-- IANA: need assignment of a mib-2 OID for this MIB +-- RFC Ed: replace mmm with IANA assigned number and remove this note + + + + + +-- RTCP Extended Reports - Voice over IP Metrics +-- +-- Description +-- This MIB module provides basic voice quality monitoring +-- capabilities for Voice-over-packet systems. The MIB contains +-- 4 tables of information:- +-- a table of call records with session identifying information +-- a table of basic parameters for each session +-- a table of call quality metrics for each session +-- a table of aggregate statistics for groups of calls + +-- TEXTUAL CONVENTIONS +-- + +LeveldB ::= TEXTUAL-CONVENTION +STATUS current +DESCRIPTION + "Represents a signal level in decibels (dB)." +SYNTAX Integer32 (-120..120|127) + +Rfactor ::= TEXTUAL-CONVENTION +STATUS current +DESCRIPTION + "Call or transmission quality expressed as an + R factor in the range 0 to 120. A value of + 127 shall be interpreted as NULL or unsupported." +REFERENCE + "ITU-T G.107" +SYNTAX Unsigned32 (0..120|127) + +ScaledMOSscore ::= TEXTUAL-CONVENTION +STATUS current +DESCRIPTION + "Call or transmission quality expressed as a + MOS score scaled by 10. MOS is typically represented + as a 1.0 to 5.0 score with a single decimal place and + hence in this representation as 10 to 50. A value of + 127 shall be interpreted as NULL or unsupported." +REFERENCE + "ITU-T P.800" +SYNTAX Integer32 (10..50|127) + +Percentage ::= TEXTUAL-CONVENTION +STATUS current +DESCRIPTION + "Percentage expressed as a rounded integer." +SYNTAX Unsigned32 (0..100) + +-- OBJECTS +-- + +rtcpXrMIBObjects OBJECT IDENTIFIER ::= { rtcpXrMIB 1 } +rtcpXrConformance OBJECT IDENTIFIER ::= { rtcpXrMIB 2 } +rtcpXrEvents OBJECT IDENTIFIER ::= { rtcpXrMIB 3 } + +-- +-- Table of Session Identifying information +-- + +rtcpXrSessionIDTable OBJECT-TYPE + SYNTAX SEQUENCE OF RtcpXrSessionIDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of information about RTP Sessions for which RTCP XR + parameters and metrics are available. " + ::= { rtcpXrMIBObjects 1 } + +rtcpXrSessionIDEntry OBJECT-TYPE + SYNTAX RtcpXrSessionIDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table of call records. A row in this table + is created for each RTP session endpoint participating." + INDEX { rtcpXrSessionIDIndex } + ::= { rtcpXrSessionIDTable 1 } + +RtcpXrSessionIDEntry ::= SEQUENCE { + rtcpXrSessionIDIndex Unsigned32, + rtcpXrSessionIDSessionIdentifier OCTET STRING, + rtcpXrSessionIDCallStartTime TimeStamp, + rtcpXrSessionIDCallStopTime TimeStamp, + rtcpXrSessionIDSourceIPtype InetAddressType, + rtcpXrSessionIDSourceIPaddress InetAddress, + rtcpXrSessionIDSourceRTPport InetPortNumber, + rtcpXrSessionIDSourceRTCPport InetPortNumber, + rtcpXrSessionIDDestIPtype InetAddressType, + rtcpXrSessionIDDestIPaddress InetAddress, + rtcpXrSessionIDDestRTPport InetPortNumber, + rtcpXrSessionIDDestRTCPport InetPortNumber, + rtcpXrSessionIDSrceIdenType INTEGER, + rtcpXrSessionIDSrceIdentifier OCTET STRING, + rtcpXrSessionIDDestIdenType INTEGER, + rtcpXrSessionIDDestIdentifier OCTET STRING, + rtcpXrSessionIDMeasurePt INTEGER, + rtcpXrSessionIDMeasurePtID OCTET STRING, + rtcpXrSessionIDReverseSession RowPointer, + rtcpXrSessionIDAltMeasurePt RowPointer +} + +rtcpXrSessionIDIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index for this session within the Session ID table." + ::= { rtcpXrSessionIDEntry 1 } + + +rtcpXrSessionIDSessionIdentifier OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Unique identifier for this session. Where a billing record + correlation identifer is not available for a particular call, + another identifier such as SSRC can be used." + ::= { rtcpXrSessionIDEntry 2 } + +rtcpXrSessionIDCallStartTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Call start time for this call. If the start time is not + known then this represents the earliest known time associated + with the call." + ::= { rtcpXrSessionIDEntry 3 } + +rtcpXrSessionIDCallStopTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Call stop time for this call. If the call is still active + then this shall have the value 0. If the call is complete + but the time is unknown then this shall have the value of the + latest time associated with the call." + ::= { rtcpXrSessionIDEntry 4 } + +rtcpXrSessionIDSourceIPtype OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source IP address type for this session." + ::= { rtcpXrSessionIDEntry 5 } + +rtcpXrSessionIDSourceIPaddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source IP address for this session." + ::= { rtcpXrSessionIDEntry 6 } + +rtcpXrSessionIDSourceRTPport OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source UDP port for RTP. A value of 0 indicates + an unknown port number." + ::= { rtcpXrSessionIDEntry 7 } + + +rtcpXrSessionIDSourceRTCPport OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source UDP port for RTCP.A value of 0 indicates + an unknown port number." + ::= { rtcpXrSessionIDEntry 8 } + +rtcpXrSessionIDDestIPtype OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination IP address type for this session." + ::= { rtcpXrSessionIDEntry 9 } + +rtcpXrSessionIDDestIPaddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination IP address for this session." + ::= { rtcpXrSessionIDEntry 10 } + +rtcpXrSessionIDDestRTPport OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination UDP port for RTP. A value of 0 indicates + an unknown port number." + ::= { rtcpXrSessionIDEntry 11 } + +rtcpXrSessionIDDestRTCPport OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination UDP port for RTCP.A value of 0 indicates + an unknown port number." + ::= { rtcpXrSessionIDEntry 12 } + +rtcpXrSessionIDSrceIdenType OBJECT-TYPE + SYNTAX INTEGER {dialedNumber (1), + urlID (2), + other (3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of address in parameter + rtcpXrSessionIDSourceIdentifier" + ::= { rtcpXrSessionIDEntry 13 } + + +rtcpXrSessionIDSrceIdentifier OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alternate identifier to the IP address. This can be E.164, + DN, or URL." + ::= { rtcpXrSessionIDEntry 14 } + +rtcpXrSessionIDDestIdenType OBJECT-TYPE + SYNTAX INTEGER {dialedNumber (1), + urlID (2), + other (3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the type of address in parameter + rtcpXrSessionIDDestIdentifier." + ::= { rtcpXrSessionIDEntry 15 } + +rtcpXrSessionIDDestIdentifier OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alternate identifier to the IP address. This can be E.164, + DN, or URL." + ::= { rtcpXrSessionIDEntry 16 } + +rtcpXrSessionIDMeasurePt OBJECT-TYPE + SYNTAX INTEGER { localEndpoint (1), + remoteEndpoint (2), + midStream (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Place that these metrics were measured - this endpoint, + remote endpoint (i.e. reported through XR), or midstream. + If this MIB is supported in a midstream device (e.g. probe) + then data from the IP endpoint reported to this device + using RFC3611 would be described as 'remoteEndpoint' and + data measured locally would be described as 'midStream'. + If this MIB is supported in an IP endpoint then the metrics + obtained from measurement of the incoming stream would be + 'localEndpoint' and those reported via RFC3611 from the + remote end would be 'remoteEndpoint'. + This MIB could therefor report both remote and local + data if located in an IP endpoint or both remote and + midstream data if located in a probe, router or other + mid-network device." + ::= { rtcpXrSessionIDEntry 17 } + + + + +rtcpXrSessionIDMeasurePtID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Information describing the identity of the endpoint that + measured the data in this row. If the data was measured + locally then this would be the identity of this system, + if measured remotely and reported via RFC3611 then this + would be the identity of the remote measurement point, + if known." + ::= { rtcpXrSessionIDEntry 18 } + +rtcpXrSessionIDReverseSession OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A pointer to the corresponding entry in this table for + the reverse direction of transmission. For example, if + this row contained locally measured metrics for the A->B + direction of transmission then the reverse session would + be the row containing locally measured metrics for the + B->A direction of transmission." + ::= { rtcpXrSessionIDEntry 19 } + +rtcpXrSessionIDAltMeasurePt OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A pointer to the corresponding entry in this table for + alternate measurement point data. For example, if this + MIB was located in a midstream devices and this row + contained metrics measured midstream then the alternate + measurement point would refer to the metrics reported + by the remote endpoint, and vice versa." + ::= { rtcpXrSessionIDEntry 20 } + + +-- +-- Table of basic call parameters +-- + +rtcpXrBaseParamTable OBJECT-TYPE + SYNTAX SEQUENCE OF RtcpXrBaseParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of basic parameters related to RTP sessions in + the Session table. " + ::= { rtcpXrMIBObjects 2 } + + + + +rtcpXrBaseParamEntry OBJECT-TYPE + SYNTAX RtcpXrBaseParamEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table of basic parameters. A row in this table + is created for each RTP session endpoint participating." + INDEX { rtcpXrSessionIDIndex } + ::= { rtcpXrBaseParamTable 1 } + +RtcpXrBaseParamEntry ::= SEQUENCE { + rtcpXrBaseParamVocoderType OCTET STRING, + rtcpXrBaseParamVocoderRate Unsigned32, + rtcpXrBaseParamFrameDuration Unsigned32, + rtcpXrBaseParamSampleRate Unsigned32, + rtcpXrBaseParamDurationMs Counter32, + rtcpXrBaseParamNetworkLossRate Percentage, + rtcpXrBaseParamAvgDiscardRate Percentage, + rtcpXrBaseParamBurstLossDensity Percentage, + rtcpXrBaseParamBurstLenMs Gauge32, + rtcpXrBaseParamGapLossDensity Percentage, + rtcpXrBaseParamGapLenMs Gauge32, + rtcpXrBaseParamAvgOWDelay Gauge32, + rtcpXrBaseParamAvgEndSysDelay Gauge32, + rtcpXrBaseParamPlcType INTEGER, + rtcpXrBaseParamJBuffAdaptMode INTEGER, + rtcpXrBaseParamJBuffAdaptRate Unsigned32, + rtcpXrBaseParamJBuffAverageDelay Gauge32, + rtcpXrBaseParamJBuffMaximumDelay Gauge32, + rtcpXrBaseParamJBuffAbsMaxDelay Gauge32, + rtcpXrBaseParamJitterLevel Gauge32 +} + +rtcpXrBaseParamVocoderType OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vocoder type used on this call. The format used shall be + ITU-T G.7xx, GSM FR, GSM EFR, GSM HR, AMR, AMR WB, iLBC + or similar. For example 'ITU G.729A'. " + ::= { rtcpXrBaseParamEntry 1 } + +rtcpXrBaseParamVocoderRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vocoder rate in use at the time this data was captured + expressed in bits per second. For example G.711 would + have the rate 64000 and G.729 would have the rate 8000." + ::= { rtcpXrBaseParamEntry 2 } + + + +rtcpXrBaseParamFrameDuration OBJECT-TYPE + SYNTAX Unsigned32 (0..16384) + UNITS "sample clock ticks" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Companion information to vocoder type. This represents the + duration of the time interval represented by a frame, which + is generally equivalent to the nominal spacing of frames. + This is expressed in sample clock ticks as defined under + rtxpXrSampleRate. + This parameter may be equated to the SDP ptime parameter + which is expressed in milliseconds (however which cannot + represent certain vocoder types, e.g. those with 2.5mS + frames)." + ::= { rtcpXrBaseParamEntry 3 } + +rtcpXrBaseParamSampleRate OBJECT-TYPE + SYNTAX Unsigned32 (0..16777215) + UNITS "samples per second" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Companion information to vocoder type. This represents the + rate at which media was sampled (e.g. 8000 for narrowband + voice, 16000 for wideband voice)." + ::= { rtcpXrBaseParamEntry 4 } + +rtcpXrBaseParamDurationMs OBJECT-TYPE + SYNTAX Counter32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current duration of call in milliseconds if still active, + duration of call in milliseconds if complete." + ::= { rtcpXrBaseParamEntry 5 } + +rtcpXrBaseParamNetworkLossRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average rate of network packet loss." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 6 } + + + + + + + + +rtcpXrBaseParamAvgDiscardRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average rate of discards due to jitter." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 7 } + +rtcpXrBaseParamBurstLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Density of loss and discarded packets during burst periods." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 8 } + +rtcpXrBaseParamBurstLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average length of bursts in milliseconds." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 9 } + +rtcpXrBaseParamGapLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Density of loss and discarded packets during gap periods." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 10 } + +rtcpXrBaseParamGapLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average length of gaps in milliseconds." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 11 } + + +rtcpXrBaseParamAvgOWDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average (symmetric) one way RTCP delay on call. A value of + zero may indicate that this value has not yet been determined." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 12 } + +rtcpXrBaseParamAvgEndSysDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average end system delay on call. A value of zero may + indicate that this value has not yet been determined." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 13 } + +rtcpXrBaseParamPlcType OBJECT-TYPE + SYNTAX INTEGER { disabled(1), + enhanced(2), + standard(3), + unspecified (4)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines type of packet loss concealment used on this call." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 14 } + +rtcpXrBaseParamJBuffAdaptMode OBJECT-TYPE + SYNTAX INTEGER { reserved (1), + nonAdaptive (2), + adaptive (3), + unknown (4) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines if jitter buffer is in fixed or adaptive mode." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 15 } + + + + + + +rtcpXrBaseParamJBuffAdaptRate OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated adaptation rate of jitter buffer." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 16 } + +rtcpXrBaseParamJBuffAverageDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average size of jitter buffer in mS." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 17 } + +rtcpXrBaseParamJBuffMaximumDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum delay through jitter buffer at current size in mS." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 18 } + +rtcpXrBaseParamJBuffAbsMaxDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Absolute maximum size jitter buffer can reach in mS." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrBaseParamEntry 19 } + +rtcpXrBaseParamJitterLevel OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average jitter level measured according to RFC3550 and + represented in terms of milliseconds." + REFERENCE + "See RFC3550 Section 6.4." + ::= { rtcpXrBaseParamEntry 20 } + + +-- Table of Call Quality Metrics +-- + +rtcpXrCallQualityTable OBJECT-TYPE + SYNTAX SEQUENCE OF RtcpXrCallQualityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of voice quality metrics. A row is created + in this table for each row in the Session table." + ::= { rtcpXrMIBObjects 3 } + +rtcpXrCallQualityEntry OBJECT-TYPE + SYNTAX RtcpXrCallQualityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table of voice quality metrics. A row in + this table is created for each row in the Session + table." + INDEX { rtcpXrSessionIDIndex } + ::= { rtcpXrCallQualityTable 1 } + +RtcpXrCallQualityEntry ::= SEQUENCE { + rtcpXrCallQualityNoiseLeveldBm LeveldB, + rtcpXrCallQualitySignalLeveldBm LeveldB, + rtcpXrCallQualityLocalRERLdB LeveldB, + rtcpXrCallQualityRemoteRERLdB LeveldB, + rtcpXrCallQualityRCQ Rfactor, + rtcpXrCallQualityRLQ Rfactor, + rtcpXrCallQualityExternalRCQ Rfactor, + rtcpXrCallQualityMOSCQ ScaledMOSscore, + rtcpXrCallQualityMOSLQ ScaledMOSscore, + rtcpXrCallQualityAlgorithm OCTET STRING +} + +rtcpXrCallQualityNoiseLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured received silent period noise level in dBm. + A value of 127 indicates that this parameter is not + available. + In midpoint applications this parameter may not be + available. If this is a midstream device and call + quality metrics were calculated using the value of + this parameter reported from the endpoint in an + RTCP XR payload then the value used in this + calculation MAY be reported." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 1 } + + +rtcpXrCallQualitySignalLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured received signal level during talkspurts in dBm. + A value of 127 indicates that this parameter is not + available. + In midpoint applications this parameter may not be + available. If this is a midstream device and call + quality metrics were calculated using the value of + this parameter reported from the endpoint in an + RTCP XR payload then the value used in this + calculation MAY be reported." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 2 } + +rtcpXrCallQualityLocalRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Residual Echo Return Loss measured at this endpoint, + or at the terminating endpoint of this RTP session. + This relates to the echo level from the network beyond + the terminating endpoint and may be interpreted as either + line echo in the case of a gateway or acoustic echo in the + case of a handset. + Note that this echo affects conversational quality as + perceived by the user at the originating end of this + RTP session. + A value of 127 indicates that this parameter is not + available. + In midpoint applications this parameter may not be + available. If this is a midstream device and call + quality metrics were calculated using the value of + this parameter reported from the endpoint in an + RTCP XR payload then the value used in this + calculation MAY be reported." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 3 } + +rtcpXrCallQualityRemoteRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Residual Echo Return Loss measured at originating endpoint + of this RTP session (i.e. the remote endpoint if this MIB + is implemented in an endpoint). + + + Note that this affects the conversational quality + metrics reported by the terminating (this) endpoint, hence + is useful in understanding what has affected the reported + call quality mertrics + A value of 127 indicates that this parameter is not + available. + In midpoint applications this parameter may not be + available. If this is a midstream device and call + quality metrics were calculated using the value of + this parameter reported from the endpoint in an + RTCP XR payload then the value used in this + calculation MAY be reported." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 4 } + +rtcpXrCallQualityRCQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Conversational quality R factor for this call. This value + SHOULD be calculated using ITU G.107 (The E Model) or + extended versions thereof." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 5 } + +rtcpXrCallQualityRLQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Listening quality R factor for this call. This value + SHOULD be calculated using ITU G.107 (The E Model) or + extended versions thereof." + ::= { rtcpXrCallQualityEntry 6 } + +rtcpXrCallQualityExternalRCQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "External R factor for this call. This value + SHOULD be calculated using ITU G.107 (The E Model) or + extended versions thereof. + The External R factor relates to the quality of an + incoming voice from another network segment. For example + if a conference bridge terminates and re-creates voice + streams then an R factor would be calculated at the bridge + for the endpoint A to bridge segment and relayed to the + + + subsequent bridge to endpoint B as an External R factor. + This allows endpoint B to estimate the end-to-end call + quality." + ::= { rtcpXrCallQualityEntry 7 } + +rtcpXrCallQualityMOSCQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated conversational quality MOS for this call + expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value + MAY be calculated by converting the R-CQ value to a MOS." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 8 } + +rtcpXrCallQualityMOSLQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Estimated listening quality MOS for this call + expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value + MAY be calculated by converting the R-CQ value to a MOS." + REFERENCE + "See RFC3611 Section 4.7." + ::= { rtcpXrCallQualityEntry 9 } + +rtcpXrCallQualityAlgorithm OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Call quality algorithm used to determine R factors + and MOS scores. For example, 'ITU-T G.107' for the + E model. If any localized parameter scaling is used + (for example Japan's TTC MOS scaling) then this + MUST also be reported." + ::= { rtcpXrCallQualityEntry 10 } + + + + + + + + + + + + + +-- +-- History Table +-- +-- + +rtcpXrHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF RtcpXrHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of aggregate measurement data for groups + of RTP sessions. A group may be a flow or any + other logical association of streams." + ::= { rtcpXrMIBObjects 4 } + +rtcpXrHistoryEntry OBJECT-TYPE + SYNTAX RtcpXrHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the table of call history records." + INDEX { rtcpXrHistoryIndex } + ::= { rtcpXrHistoryTable 1 } + +RtcpXrHistoryEntry ::= SEQUENCE { + rtcpXrHistoryIndex Unsigned32, + rtcpXrHistoryGroupName OCTET STRING, + rtcpXrHistoryStartTime TimeStamp, + rtcpXrHistoryStopTime TimeStamp, + rtcpXrHistoryNumOfSessions Counter32, + rtcpXrHistoryMinDurationMs Gauge32, + rtcpXrHistoryMaxDurationMs Gauge32, + rtcpXrHistoryAvgDurationMs Gauge32, + rtcpXrHistoryMaxNetworkLossRate Percentage, + rtcpXrHistoryAvgNetworkLossRate Percentage, + rtcpXrHistoryMaxDiscardRate Percentage, + rtcpXrHistoryAvgDiscardRate Percentage, + rtcpXrHistoryMaxBurstLossDensity Percentage, + rtcpXrHistoryAvgBurstLossDensity Percentage, + rtcpXrHistoryMinBurstLenMs Gauge32, + rtcpXrHistoryMaxBurstLenMs Gauge32, + rtcpXrHistoryAvgBurstLenMs Gauge32, + rtcpXrHistoryMaxGapLossDensity Percentage, + rtcpXrHistoryAvgGapLossDensity Percentage, + rtcpXrHistoryMinGapLenMs Gauge32, + rtcpXrHistoryMaxGapLenMs Gauge32, + rtcpXrHistoryAvgGapLenMs Gauge32, + rtcpXrHistoryMinOneWayDelay Gauge32, + rtcpXrHistoryMaxOneWayDelay Gauge32, + rtcpXrHistoryAvgOneWayDelay Gauge32, + rtcpXrHistoryMinEndSystemDelay Gauge32, + rtcpXrHistoryMaxEndSystemDelay Gauge32, + rtcpXrHistoryAvgEndSystemDelay Gauge32, + rtcpXrHistoryMinJitterLevel Gauge32, + rtcpXrHistoryMaxJitterLevel Gauge32, + rtcpXrHistoryAvgJitterLevel Gauge32, + rtcpXrHistoryMinNoiseLeveldBm LeveldB, + rtcpXrHistoryMaxNoiseLeveldBm LeveldB, + rtcpXrHistoryAvgNoiseLeveldBm LeveldB, + rtcpXrHistoryNoiseLevelCount Counter32, + rtcpXrHistoryMinSignalLeveldBm LeveldB, + rtcpXrHistoryMaxSignalLeveldBm LeveldB, + rtcpXrHistoryAvgSignalLeveldBm LeveldB, + rtcpXrHistorySignalLevelCount Counter32, + rtcpXrHistoryMinLocalRERLdB LeveldB, + rtcpXrHistoryMaxLocalRERLdB LeveldB, + rtcpXrHistoryAvgLocalRERLdB LeveldB, + rtcpXrHistoryLocalRERLCount Counter32, + rtcpXrHistoryMinRemoteRERLdB LeveldB, + rtcpXrHistoryMaxRemoteRERLdB LeveldB, + rtcpXrHistoryAvgRemoteRERLdB LeveldB, + rtcpXrHistoryRemoteRERLCount Counter32, + rtcpXrHistoryMinRCQ Rfactor, + rtcpXrHistoryMaxRCQ Rfactor, + rtcpXrHistoryAvgRCQ Rfactor, + rtcpXrHistoryRCQCount Counter32, + rtcpXrHistoryMinRLQ Rfactor, + rtcpXrHistoryMaxRLQ Rfactor, + rtcpXrHistoryAvgRLQ Rfactor, + rtcpXrHistoryRLQCount Counter32, + rtcpXrHistoryMinMOSCQ ScaledMOSscore, + rtcpXrHistoryMaxMOSCQ ScaledMOSscore, + rtcpXrHistoryAvgMOSCQ ScaledMOSscore, + rtcpXrHistoryMOSCQCount Counter32, + rtcpXrHistoryMinMOSLQ ScaledMOSscore, + rtcpXrHistoryMaxMOSLQ ScaledMOSscore, + rtcpXrHistoryAvgMOSLQ ScaledMOSscore, + rtcpXrHistoryMOSLQCount Counter32, + rtcpXrHistoryCQAlgorithm OCTET STRING, + rtcpXrHistoryReset INTEGER +} + + +rtcpXrHistoryIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index for this set of aggregate data." + ::= { rtcpXrHistoryEntry 1 } + + + + + + + + +rtcpXrHistoryGroupName OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Name of this set of aggregate data. Examples may include + a flow, an interface or some other logical grouping of + RTP sessions." + ::= { rtcpXrHistoryEntry 2 } + +rtcpXrHistoryStartTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time at which this history was reset or started." + ::= {rtcpXrHistoryEntry 3 } + +rtcpXrHistoryStopTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time at which this history was stopped." + ::= {rtcpXrHistoryEntry 4 } + +rtcpXrHistoryNumOfSessions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of calls included in this history." + ::= {rtcpXrHistoryEntry 5 } + +rtcpXrHistoryMinDurationMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum duration of calls." + ::= {rtcpXrHistoryEntry 6 } + +rtcpXrHistoryMaxDurationMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum duration of calls." + ::= {rtcpXrHistoryEntry 7 } + + + + +rtcpXrHistoryAvgDurationMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average duration of calls." + ::= {rtcpXrHistoryEntry 8 } + +rtcpXrHistoryMaxNetworkLossRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum loss rate per call." + ::= {rtcpXrHistoryEntry 9 } + +rtcpXrHistoryAvgNetworkLossRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average loss rate across calls." + ::= {rtcpXrHistoryEntry 10 } + +rtcpXrHistoryMaxDiscardRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum discard rate per call." + ::= {rtcpXrHistoryEntry 11 } + +rtcpXrHistoryAvgDiscardRate OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average discard rate across calls." + ::= {rtcpXrHistoryEntry 12 } + +rtcpXrHistoryMaxBurstLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum density of bursts if loss/discard." + ::= {rtcpXrHistoryEntry 13 } + + +rtcpXrHistoryAvgBurstLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average density of bursts of loss/discard." + ::= {rtcpXrHistoryEntry 14 } + +rtcpXrHistoryMinBurstLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum length of bursts." + ::= {rtcpXrHistoryEntry 15 } + +rtcpXrHistoryMaxBurstLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum length of bursts." + ::= {rtcpXrHistoryEntry 16 } + +rtcpXrHistoryAvgBurstLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average length of bursts." + ::= {rtcpXrHistoryEntry 17 } + +rtcpXrHistoryMaxGapLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum loss/discard density in gaps." + ::= {rtcpXrHistoryEntry 18 } + +rtcpXrHistoryAvgGapLossDensity OBJECT-TYPE + SYNTAX Percentage + UNITS "percent" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average loss/discard density in gaps." + ::= {rtcpXrHistoryEntry 19 } + + +rtcpXrHistoryMinGapLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum average per-call gap length." + ::= {rtcpXrHistoryEntry 20 } + +rtcpXrHistoryMaxGapLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum average per-call gap length." + ::= {rtcpXrHistoryEntry 21 } + +rtcpXrHistoryAvgGapLenMs OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average per-call gap length." + ::= {rtcpXrHistoryEntry 22 } + +rtcpXrHistoryMinOneWayDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum one way delay." + ::= {rtcpXrHistoryEntry 23 } + +rtcpXrHistoryMaxOneWayDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum one way delay." + ::= {rtcpXrHistoryEntry 24 } + +rtcpXrHistoryAvgOneWayDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average one way delay." + ::= {rtcpXrHistoryEntry 25 } + + +rtcpXrHistoryMinEndSystemDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum end system delay." + ::= {rtcpXrHistoryEntry 26 } + +rtcpXrHistoryMaxEndSystemDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum end system delay." + ::= {rtcpXrHistoryEntry 27 } + +rtcpXrHistoryAvgEndSystemDelay OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average end system delay." + ::= {rtcpXrHistoryEntry 28 } + +rtcpXrHistoryMinJitterLevel OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum jitter level." + ::= {rtcpXrHistoryEntry 29 } + +rtcpXrHistoryMaxJitterLevel OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum jitter level." + ::= {rtcpXrHistoryEntry 30 } + +rtcpXrHistoryAvgJitterLevel OBJECT-TYPE + SYNTAX Gauge32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average jitter level." + ::= {rtcpXrHistoryEntry 31 } + + +rtcpXrHistoryMinNoiseLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum noise level." + ::= {rtcpXrHistoryEntry 32 } + +rtcpXrHistoryMaxNoiseLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum noise level." + ::= {rtcpXrHistoryEntry 33 } + +rtcpXrHistoryAvgNoiseLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average noise level." + ::= {rtcpXrHistoryEntry 34 } + +rtcpXrHistoryNoiseLevelCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the Noise Level + history values (as Noise Level is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 35 } + +rtcpXrHistoryMinSignalLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum signal level." + ::= {rtcpXrHistoryEntry 36 } + +rtcpXrHistoryMaxSignalLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum signal level." + ::= {rtcpXrHistoryEntry 37 } + + +rtcpXrHistoryAvgSignalLeveldBm OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm0" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average signal level." + ::= {rtcpXrHistoryEntry 38 } + +rtcpXrHistorySignalLevelCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the Signal Level + history values (as Signal Level is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 39 } + +rtcpXrHistoryMinLocalRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum local Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 40 } + +rtcpXrHistoryMaxLocalRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum local Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 41 } + +rtcpXrHistoryAvgLocalRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average local Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 42 } + +rtcpXrHistoryLocalRERLCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the Local RERL + history values (as Local RERL is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 43 } + + +rtcpXrHistoryMinRemoteRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum remote Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 44 } + +rtcpXrHistoryMaxRemoteRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum remote Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 45 } + +rtcpXrHistoryAvgRemoteRERLdB OBJECT-TYPE + SYNTAX LeveldB + UNITS "dBm" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum remote Residual Echo Return Loss." + ::= {rtcpXrHistoryEntry 46 } + +rtcpXrHistoryRemoteRERLCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the Remote RERL + history values (as Remote RERL is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 47 } + +rtcpXrHistoryMinRCQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum conversational R factor." + ::= {rtcpXrHistoryEntry 48 } + +rtcpXrHistoryMaxRCQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum conversational R factor" + ::= {rtcpXrHistoryEntry 49 } + + +rtcpXrHistoryAvgRCQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average conversational R factor" + ::= {rtcpXrHistoryEntry 50 } + +rtcpXrHistoryRCQCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the R CQ + history values (as R CQ is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 51 } + +rtcpXrHistoryMinRLQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum listening quality R factor." + ::= {rtcpXrHistoryEntry 52 } + +rtcpXrHistoryMaxRLQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum listening quality R factor." + ::= {rtcpXrHistoryEntry 53 } + +rtcpXrHistoryAvgRLQ OBJECT-TYPE + SYNTAX Rfactor + UNITS "R factor" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average listening quality R factor." + ::= {rtcpXrHistoryEntry 54 } + +rtcpXrHistoryRLQCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the R LQ + history values (as R LQ is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 55 } + +rtcpXrHistoryMinMOSCQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum conversational quality MOS." + ::= {rtcpXrHistoryEntry 56 } + +rtcpXrHistoryMaxMOSCQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum conversational quality MOS." + ::= {rtcpXrHistoryEntry 57 } + +rtcpXrHistoryAvgMOSCQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average conversational quality MOS." + ::= {rtcpXrHistoryEntry 58 } + +rtcpXrHistoryMOSCQCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the MOS CQ + history values (as MOS CQ is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 59 } + +rtcpXrHistoryMinMOSLQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum listening quality MOS." + ::= {rtcpXrHistoryEntry 60 } + +rtcpXrHistoryMaxMOSLQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum listening quality MOS." + ::= {rtcpXrHistoryEntry 61 } + +rtcpXrHistoryAvgMOSLQ OBJECT-TYPE + SYNTAX ScaledMOSscore + UNITS "MOS x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average listening quality MOS." + ::= {rtcpXrHistoryEntry 62 } + +rtcpXrHistoryMOSLQCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of sessions included in the MOS LQ + history values (as MOS LQ is an optional + parameter and may not be present on all calls." + ::= {rtcpXrHistoryEntry 63 } + +rtcpXrHistoryCQAlgorithm OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Call quality algorithm used - must be consistent + for all calls in this history." + ::= {rtcpXrHistoryEntry 64 } + +rtcpXrHistoryReset OBJECT-TYPE + SYNTAX INTEGER { running (1), + stop (2), + reset (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Status of this row in the history table. + Writing a value of 2 to this object MUST cause + history updates to be stopped for this row. Writing + a value of 3 to this object MUST cause the history + row to be reset. + Reads MUST return a value of 1 if the row is still + being updated or 2 if the row update has stopped." + ::= {rtcpXrHistoryEntry 65 } + +-- +-- Notifications +-- +rtcpXrVoipThresholdViolation NOTIFICATION-TYPE + OBJECTS { rtcpXrVoipAlertSeverity, rtcpXrVoipAlertType, + rtcpXrVoipAlertInfoType, rtcpXrVoipAlertPointer } + STATUS current + DESCRIPTION + "Notification that voice quality has changed + Sent immediately when the condition is detected." + ::= { rtcpXrEvents 1} + +rtcpXrEventParam OBJECT IDENTIFIER ::= { rtcpXrEvents 2 } + +rtcpXrVoipAlertType OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Text description of the type of alert. Where possible, + this parameter should be populated with the correct + rtcpXrVoipEntry or rtcpXrVoipHistory description." + ::= { rtcpXrEventParam 1 } + +rtcpXrVoipAlertInfoType OBJECT-TYPE + SYNTAX INTEGER { adminStringOnly (1), + sessionPointer (2), + historyPointer (3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the type of information returned in the + rtcpXrVoipAlertInfo parameter." + ::= { rtcpXrEventParam 2 } + +rtcpXrVoipAlertPointer OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Pointer to the table of call session information to + identify the specific call that triggered the alert." + ::= { rtcpXrEventParam 3 } + +rtcpXrVoipAlertSeverity OBJECT-TYPE + SYNTAX INTEGER (1..6) --ItuPerceivedSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The severity of the alert as defined in ITU-T X.733 and + RFC3877." + REFERENCE + "See Alarm MIB - RFC3877." + ::= { rtcpXrEventParam 4 } + + +-- +-- MODULE GROUPS +-- +-- There are four types of RTCP XR VoIP Metrics System. +-- RTCP XR VOIP Metrics Systems MUST implement one of the four +-- identified types of system and SHOULD NOT implement the +-- rtcpXrMinimalCompliance system, which is included only +-- for reasons of compatibility with RFC3611's minimal +-- requirements. +-- + + rtcpXrCompliances OBJECT IDENTIFIER ::= { rtcpXrConformance 1 } + rtcpXrGroups OBJECT IDENTIFIER ::= { rtcpXrConformance 2 } + + + rtcpXrFullMetricsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance to the + rtcpXr MIB for VoIP devices that support basic + reporting." + MODULE -- this module + MANDATORY-GROUPS { rtcpXrSessionIDGroup, + rtcpXrBaseParamGroup, + rtcpXrCallQualityGroup + } + ::= { rtcpXrCompliances 1 } + + rtcpXrMetricsAlertsCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance to the + rtcpXr MIB for VoIP devices that support reporting + and alerts." + MODULE -- this module + MANDATORY-GROUPS { rtcpXrSessionIDGroup, + rtcpXrBaseParamGroup, + rtcpXrCallQualityGroup, + rtcpXrNotificationParmsGroup, + rtcpXrNotificationsGroup + } + ::= { rtcpXrCompliances 2 } + + rtcpXrMetricsHistoryCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the requirements for conformance to the + rtcpXr MIB for VoIP devices that support reporting, + call history and alerts." + MODULE -- this module + MANDATORY-GROUPS { rtcpXrSessionIDGroup, + rtcpXrBaseParamGroup, + rtcpXrCallQualityGroup, + rtcpXrMIBHistoryGroup, + rtcpXrNotificationParmsGroup, + rtcpXrNotificationsGroup } + ::= { rtcpXrCompliances 3 } + + + + + + + + + + + rtcpXrMinimalCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "Describes the minimal requirements for conformance to + the rtcpXr MIB - NOT RECOMMENDED." + MODULE -- this module + MANDATORY-GROUPS { rtcpXrSessionIDGroup, + rtcpXrBaseParamGroup + } + ::= { rtcpXrCompliances 4 } + + rtcpXrSessionIDGroup OBJECT-GROUP + OBJECTS { + rtcpXrSessionIDSessionIdentifier, + rtcpXrSessionIDCallStartTime, + rtcpXrSessionIDCallStopTime, + rtcpXrSessionIDSourceIPtype, + rtcpXrSessionIDSourceIPaddress, + rtcpXrSessionIDSourceRTPport, + rtcpXrSessionIDSourceRTCPport, + rtcpXrSessionIDDestIPtype, + rtcpXrSessionIDDestIPaddress, + rtcpXrSessionIDDestRTPport, + rtcpXrSessionIDDestRTCPport, + rtcpXrSessionIDDestIdentifier, + rtcpXrSessionIDDestIdenType, + rtcpXrSessionIDSrceIdentifier, + rtcpXrSessionIDSrceIdenType, + rtcpXrSessionIDMeasurePt, + rtcpXrSessionIDMeasurePtID, + rtcpXrSessionIDReverseSession, + rtcpXrSessionIDAltMeasurePt + } + STATUS current + DESCRIPTION + "Session ID objects used in rtcpXr VoIP Metrics MIB" + ::= { rtcpXrGroups 1 } + + rtcpXrBaseParamGroup OBJECT-GROUP + OBJECTS { + rtcpXrBaseParamVocoderType, + rtcpXrBaseParamVocoderRate, + rtcpXrBaseParamFrameDuration, + rtcpXrBaseParamSampleRate, + rtcpXrBaseParamDurationMs, + rtcpXrBaseParamNetworkLossRate, + rtcpXrBaseParamAvgDiscardRate, + rtcpXrBaseParamBurstLossDensity, + rtcpXrBaseParamBurstLenMs, + rtcpXrBaseParamGapLossDensity, + rtcpXrBaseParamGapLenMs, + rtcpXrBaseParamAvgOWDelay, + rtcpXrBaseParamAvgEndSysDelay, + rtcpXrBaseParamPlcType, + rtcpXrBaseParamJBuffAdaptMode, + rtcpXrBaseParamJBuffAdaptRate, + rtcpXrBaseParamJBuffAverageDelay, + rtcpXrBaseParamJBuffMaximumDelay, + rtcpXrBaseParamJBuffAbsMaxDelay, + rtcpXrBaseParamJitterLevel + } + STATUS current + DESCRIPTION + "Objects used in rtcpXr VoIP Metrics MIB" + ::= { rtcpXrGroups 2 } + + + rtcpXrCallQualityGroup OBJECT-GROUP + OBJECTS { + rtcpXrCallQualityNoiseLeveldBm, + rtcpXrCallQualitySignalLeveldBm, + rtcpXrCallQualityLocalRERLdB, + rtcpXrCallQualityRemoteRERLdB, + rtcpXrCallQualityRCQ, + rtcpXrCallQualityRLQ, + rtcpXrCallQualityExternalRCQ, + rtcpXrCallQualityMOSCQ, + rtcpXrCallQualityMOSLQ, + rtcpXrCallQualityAlgorithm + } + STATUS current + DESCRIPTION + "Call quality objects used in rtcpXr VoIP Metrics MIB" + ::= { rtcpXrGroups 3 } + + rtcpXrMIBHistoryGroup OBJECT-GROUP + OBJECTS { + rtcpXrHistoryGroupName, + rtcpXrHistoryStartTime, + rtcpXrHistoryStopTime, + rtcpXrHistoryNumOfSessions, + rtcpXrHistoryMinDurationMs, + rtcpXrHistoryMaxDurationMs, + rtcpXrHistoryAvgDurationMs, + rtcpXrHistoryMaxNetworkLossRate, + rtcpXrHistoryAvgNetworkLossRate, + rtcpXrHistoryMaxDiscardRate, + rtcpXrHistoryAvgDiscardRate, + rtcpXrHistoryMaxBurstLossDensity, + rtcpXrHistoryAvgBurstLossDensity, + rtcpXrHistoryMinBurstLenMs, + rtcpXrHistoryMaxBurstLenMs, + rtcpXrHistoryAvgBurstLenMs, + rtcpXrHistoryMaxGapLossDensity, + rtcpXrHistoryAvgGapLossDensity, + rtcpXrHistoryMinGapLenMs, + rtcpXrHistoryMaxGapLenMs, + rtcpXrHistoryAvgGapLenMs, + rtcpXrHistoryMinOneWayDelay, + rtcpXrHistoryMaxOneWayDelay, + rtcpXrHistoryAvgOneWayDelay, + rtcpXrHistoryMinEndSystemDelay, + rtcpXrHistoryMaxEndSystemDelay, + rtcpXrHistoryAvgEndSystemDelay, + rtcpXrHistoryAvgJitterLevel, + rtcpXrHistoryMinJitterLevel, + rtcpXrHistoryMaxJitterLevel, + rtcpXrHistoryMinNoiseLeveldBm, + rtcpXrHistoryMaxNoiseLeveldBm, + rtcpXrHistoryAvgNoiseLeveldBm, + rtcpXrHistoryNoiseLevelCount, + rtcpXrHistoryMinSignalLeveldBm, + rtcpXrHistoryMaxSignalLeveldBm, + rtcpXrHistoryAvgSignalLeveldBm, + rtcpXrHistorySignalLevelCount, + rtcpXrHistoryMinLocalRERLdB, + rtcpXrHistoryMaxLocalRERLdB, + rtcpXrHistoryAvgLocalRERLdB, + rtcpXrHistoryLocalRERLCount, + rtcpXrHistoryMinRemoteRERLdB, + rtcpXrHistoryMaxRemoteRERLdB, + rtcpXrHistoryAvgRemoteRERLdB, + rtcpXrHistoryRemoteRERLCount, + rtcpXrHistoryMinRCQ, + rtcpXrHistoryMaxRCQ, + rtcpXrHistoryAvgRCQ, + rtcpXrHistoryRCQCount, + rtcpXrHistoryMinRLQ, + rtcpXrHistoryMaxRLQ, + rtcpXrHistoryAvgRLQ, + rtcpXrHistoryRLQCount, + rtcpXrHistoryMinMOSCQ, + rtcpXrHistoryMaxMOSCQ, + rtcpXrHistoryAvgMOSCQ, + rtcpXrHistoryMOSCQCount, + rtcpXrHistoryMinMOSLQ, + rtcpXrHistoryMaxMOSLQ, + rtcpXrHistoryAvgMOSLQ, + rtcpXrHistoryMOSLQCount, + rtcpXrHistoryCQAlgorithm, + rtcpXrHistoryReset + } + STATUS current + DESCRIPTION + "Objects used in rtcpXr VoIP History MIB" + ::= { rtcpXrGroups 4 } + + + + rtcpXrNotificationParmsGroup OBJECT-GROUP + OBJECTS { + rtcpXrVoipAlertSeverity, + rtcpXrVoipAlertType, + rtcpXrVoipAlertInfoType, + rtcpXrVoipAlertPointer + } + STATUS current + DESCRIPTION + "Notification parameters emitted by a rtcpXr endpoint." + ::= { rtcpXrGroups 5 } + + rtcpXrNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + rtcpXrVoipThresholdViolation + } + STATUS current + DESCRIPTION + "Notifications emitted by a rtcpXr endpoint." + ::= { rtcpXrGroups 6 } + + + END -- cgit v1.2.3