From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB | 1031 +++++++++++++++++++++++++++++++++ 1 file changed, 1031 insertions(+) create mode 100644 MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB (limited to 'MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB') diff --git a/MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB b/MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB new file mode 100644 index 0000000..97b596c --- /dev/null +++ b/MIBS/brocade/FOUNDRY-SN-POS-GROUP-MIB @@ -0,0 +1,1031 @@ +FOUNDRY-SN-POS-GROUP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, Unsigned32,Integer32 + FROM SNMPv2-SMI + router + FROM FOUNDRY-SN-ROOT-MIB + ifIndex + FROM IF-MIB + DisplayString,TEXTUAL-CONVENTION + FROM SNMPv2-TC; + +snPOS MODULE-IDENTITY + LAST-UPDATED "201006020000Z" -- 04 June 2010 + ORGANIZATION "Brocade Communications Systems, Inc." + CONTACT-INFO + "Technical Support Center + 130 Holger Way, + San Jose, CA 95134 + Email: ipsupport@brocade.com + Phone: 1-800-752-8061 + URL: www.brocade.com" + DESCRIPTION + "Copyright 1996-2010 Brocade Communications Systems, Inc. + All rights reserved. + This Brocade Communications Systems SNMP Management Information Base Specification + embodies Brocade Communications Systems' confidential and proprietary + intellectual property. Brocade Communications Systems retains all + title and ownership in the Specification, including any revisions. + + This Specification is supplied AS IS, and Brocade Communications Systems makes + no warranty, either express or implied, as to the use, + operation, condition, or performance of the specification, and any unintended + consequence it may on the user environment." + + REVISION "201006020000Z" -- 04 June 2010 + DESCRIPTION + "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." + + REVISION "200909300000Z" -- September 30, 2009 + DESCRIPTION + "" + ::= { router 14} + + -- textual conventions + + POSStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " + Status Values + " + SYNTAX INTEGER { disabled(0), enabled(1) } + +snPOSInfo OBJECT IDENTIFIER ::= { snPOS 1 } + +-- POS Port table information + +snPOSInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnPOSInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A specific snPOSInfo group consists of a number of + switch ports. " + ::= { snPOSInfo 1 } + +snPOSInfoEntry OBJECT-TYPE + SYNTAX SnPOSInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the snPOSInfo table indicates the + configuration on a specified port. A SNMP SET PDU + for a row of the snPOSInfoTable requires the entired + sequence of the MIB Objects in each + snPOSInfoEntry stored in one PDU. Otherwise, + GENERR return-value will be returned." + INDEX { + snPOSInfoPortNum + } + ::= { snPOSInfoTable 1 } + +SnPOSInfoEntry ::= SEQUENCE { + snPOSInfoPortNum + Integer32, + snPOSIfIndex + Integer32, + snPOSDescr + DisplayString, + snPOSName + DisplayString, + snPOSInfoSpeed + INTEGER, + snPOSInfoAdminStatus + INTEGER, + snPOSInfoLinkStatus + INTEGER, + snPOSInfoClock + INTEGER, + snPOSInfoLoopBack + INTEGER, + snPOSInfoScrambleATM + POSStatus, + snPOSInfoFraming + INTEGER, + snPOSInfoCRC + INTEGER, + snPOSInfoKeepAlive + INTEGER, + snPOSInfoFlagC2 + INTEGER, + snPOSInfoFlagJ0 + INTEGER, + snPOSInfoFlagH1 + INTEGER, + snPOSStatsInFrames + Counter32, + snPOSStatsOutFrames + Counter32, + snPOSStatsAlignErrors + Counter32, + snPOSStatsFCSErrors + Counter32, + snPOSStatsFrameTooLongs + Counter32, + snPOSStatsFrameTooShorts + Counter32, + snPOSStatsInDiscard + Counter32, + snPOSStatsOutDiscard + Counter32, + snPOSInOctets + OCTET STRING, + snPOSOutOctets + OCTET STRING, + snPOSStatsInBitsPerSec + Gauge32, + snPOSStatsOutBitsPerSec + Gauge32, + snPOSStatsInPktsPerSec + Gauge32, + snPOSStatsOutPktsPerSec + Gauge32, + snPOSStatsInUtilization + INTEGER , + snPOSStatsOutUtilization + INTEGER , + snPOSTagType + INTEGER, + snPOSStatsB1 + Counter32, + snPOSStatsB2 + Counter32, + snPOSStatsB3 + Counter32, + snPOSStatsAIS + Counter32, + snPOSStatsRDI + Counter32, + snPOSStatsLOP + Counter32, + snPOSStatsLOF + Counter32, + snPOSStatsLOS + Counter32 + } + + +snPOSInfoPortNum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port index. + The bit 0 to bit 7: port number. + The bit 8 to bit 11: slot number (slot for chassis only)." + ::= { snPOSInfoEntry 1 } + + +snPOSIfIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "In order to identify a particular interface, this + object shall identify the instance of the ifIndex + object, defined in RFC 1213 and RFC 1573." + ::= { snPOSInfoEntry 2 } + + +snPOSDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual string containing the slot/port information + about the interface." + ::= { snPOSInfoEntry 3 } + + +snPOSName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..255)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Port Name string." + ::= { snPOSInfoEntry 4 } + +snPOSInfoSpeed OBJECT-TYPE + SYNTAX INTEGER { + s155000(1), + s622000(2), + other(3), + s2488000(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The speed configuration for a port. The values are: + 155000 + 622000 + 2488000 + " + ::= { snPOSInfoEntry 5 } + + +snPOSInfoAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + down(2), + testing(3) -- in some test mode + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of all ports. The + testing(3) state indicates that no operational + packets can be passed. + (same as ifAdminStatus in MIB-II)" + ::= { snPOSInfoEntry 6 } + + +snPOSInfoLinkStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + down(2), + testing(3) -- in some test mode + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the interface. + The testing(3) state indicates that no operational + packets can be passed. + (same as ifOperStatus in MIB-II)" + ::= { snPOSInfoEntry 7 } + + +snPOSInfoClock OBJECT-TYPE + SYNTAX INTEGER { + internal(1), + line(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clock default internal" + ::= { snPOSInfoEntry 8 } + +snPOSInfoLoopBack OBJECT-TYPE + SYNTAX INTEGER { + line(1), + internal(2), + none(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Loop back default none" + ::= { snPOSInfoEntry 9 } + +snPOSInfoScrambleATM OBJECT-TYPE + SYNTAX POSStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ATM style scrambling default off" + ::= { snPOSInfoEntry 10 } + +snPOSInfoFraming OBJECT-TYPE + SYNTAX INTEGER { + sonet(1), + sdh(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Framing default SONET" + ::= { snPOSInfoEntry 11 } + +snPOSInfoCRC OBJECT-TYPE + SYNTAX INTEGER { + crc32bits(1), + crc16bits(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "CRC default 32 bit" + ::= { snPOSInfoEntry 12 } + +snPOSInfoKeepAlive OBJECT-TYPE + SYNTAX INTEGER (0..32767) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Keep-alive default 10" + ::= { snPOSInfoEntry 13 } + +snPOSInfoFlagC2 OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "C2 flag" + ::= { snPOSInfoEntry 14 } + + +snPOSInfoFlagJ0 OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "J0 flag" + ::= { snPOSInfoEntry 15 } + +snPOSInfoFlagH1 OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "H1 flag" + ::= { snPOSInfoEntry 16 } + +snPOSStatsInFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received on the interface." + ::= { snPOSInfoEntry 17 } + + +snPOSStatsOutFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets transmitted out of the interface." + ::= { snPOSInfoEntry 18 } + + +snPOSStatsAlignErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "dot3StatsAlignmentErrors : A count of frames + received on a particular interface that are + not an integral number of octets in length + and do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the alignmentError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + ::= { snPOSInfoEntry 19 } + +snPOSStatsFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "dot3StatsFCSErrors : A count of frames received + on a particular interface that are an integral + number of octets in length but do not pass the + FCS check. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + ::= { snPOSInfoEntry 20 } + + +snPOSStatsFrameTooLongs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "dot3StatsFrameTooLongs : A count of frames + received on a particular interface that + exceed the maximum permitted frame size. + + The count represented by an instance of this + object is incremented when the frameTooLong + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + ::= { snPOSInfoEntry 21 } + + +snPOSStatsFrameTooShorts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " A count of frames received on a particular + interface that below the minimum permitted + frame size." + ::= { snPOSInfoEntry 22 } + +snPOSStatsInDiscard OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of inbound packets which were chosen + to be discarded even though no errors had been + detected to prevent their being deliverable to a + higher-layer protocol. One possible reason for + discarding such a packet could be to free up + buffer space." + ::= { snPOSInfoEntry 23 } + + +snPOSStatsOutDiscard OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of outbound packets which were chosen + to be discarded even though no errors had been + detected to prevent their being transmitted. One + possible reason for discarding such a packet could + be to free up buffer space." + ::= { snPOSInfoEntry 24 } + +snPOSInOctets OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received on the interface, + including framing characters. This object is a 64-bit + counter of the ifInOctets object, defined in RFC 1213. + The octet string is in big-endian byte order." + ::= { snPOSInfoEntry 25 } + + +snPOSOutOctets OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted out of the interface, + including framing characters. This object is a 64-bit + counter of the ifOutOctets object, defined in RFC 1213. + The octet string is in big-endian byte order." + ::= { snPOSInfoEntry 26 } + + +snPOSStatsInBitsPerSec OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bits per second received on the interface + over a 5 minutes interval." + ::= { snPOSInfoEntry 27 } + + +snPOSStatsOutBitsPerSec OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bits per second transmitted out of the interface + over a 5 minutes interval." + ::= { snPOSInfoEntry 28 } + + +snPOSStatsInPktsPerSec OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets per second received on the interface + over a 5 minutes interval." + ::= { snPOSInfoEntry 29 } + + +snPOSStatsOutPktsPerSec OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets per second transmitted out of the interface + over a 5 minutes interval." + ::= { snPOSInfoEntry 30 } + + +snPOSStatsInUtilization OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The input network utilization in hundredths of a percent + over a 5 minutes interval." + ::= { snPOSInfoEntry 31 } + + +snPOSStatsOutUtilization OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The output network utilization in hundredths of a percent + over a 5 minutes interval." + ::= { snPOSInfoEntry 32 } + +snPOSTagType OBJECT-TYPE + SYNTAX INTEGER { + tagged(1), + untagged(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For tagged port, we could have multiple VLANs + per port." + ::= {snPOSInfoEntry 33} + +snPOSStatsB1 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Section error monitoring." + ::= { snPOSInfoEntry 34 } + +snPOSStatsB2 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Line error monitoring." + ::= { snPOSInfoEntry 35 } + +snPOSStatsB3 OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Path error monitoring." + ::= { snPOSInfoEntry 36 } + +snPOSStatsAIS OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Alarm indication signal." + ::= { snPOSInfoEntry 37 } + +snPOSStatsRDI OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remote defect indication." + ::= { snPOSInfoEntry 38 } + +snPOSStatsLOP OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Loss of pointer." + ::= { snPOSInfoEntry 39 } + +snPOSStatsLOF OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Loss of frame." + ::= { snPOSInfoEntry 40 } + +snPOSStatsLOS OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Loss of signal." + ::= { snPOSInfoEntry 41 } + +-- POS Port table information + +snPOSInfo2Table OBJECT-TYPE + SYNTAX SEQUENCE OF SnPOSInfo2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An snPOSInfo2Table consists of a number of + SnPOSInfo2Entry entries" + ::= { snPOSInfo 2 } + +snPOSInfo2Entry OBJECT-TYPE + SYNTAX SnPOSInfo2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the snPOSInfo2Table indicates the + POS configuration on a specified port" + INDEX { + ifIndex + } + ::= { snPOSInfo2Table 1 } + +SnPOSInfo2Entry ::= SEQUENCE { + snPOSInfo2Clock + INTEGER, + snPOSInfo2ScrambleATM + POSStatus, + snPOSInfo2CRC + INTEGER, + snPOSInfo2KeepAlive + Unsigned32, + snPOSInfo2FlagC2 + Unsigned32, + snPOSInfo2SSM + INTEGER, + snPOSInfo2Encapsulation + INTEGER, + snPOSInfo2AlarmMonitoring + INTEGER, + snPOSInfo2OverheadJ0ExpectedMessage + OCTET STRING, + snPOSInfo2OverheadJ0TransmitMessage + OCTET STRING, + snPOSInfo2OverheadJ1ExpectedMessage + OCTET STRING, + snPOSInfo2OverheadJ1MessageLength + INTEGER, + snPOSInfo2OverheadJ1TransmitMessage + OCTET STRING + } + +snPOSInfo2Clock OBJECT-TYPE + SYNTAX INTEGER { + internal(1), + line(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Clock source for the POS Interface + internal(1) - internal source + line (2) - clocking is derived from line" + DEFVAL { internal } + ::= { snPOSInfo2Entry 1 } + +snPOSInfo2ScrambleATM OBJECT-TYPE + SYNTAX POSStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ATM style scrambling for the POS interface + disabled(0) - scrambling is disabled + enabled(1) - scrambling is enabled" + DEFVAL { disabled } + ::= { snPOSInfo2Entry 2 } + +snPOSInfo2CRC OBJECT-TYPE + SYNTAX INTEGER { + crc32bits(1), + crc16bits(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Length of Cyclic Redundnacy Check (CRC) on the + POS interface + crc32bits(1) - 32 bits + crc16bits(2) - 16 buts" + DEFVAL { crc32bits } + ::= { snPOSInfo2Entry 3 } + +snPOSInfo2KeepAlive OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Keep-alive timer for the POS interface in seconds" + DEFVAL { 10 } + ::= { snPOSInfo2Entry 4 } + +snPOSInfo2FlagC2 OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "C2 flag" + ::= { snPOSInfo2Entry 5 } + +snPOSInfo2SSM OBJECT-TYPE + SYNTAX INTEGER { + t1SonetPrimaryReferenceSource(1) , + t1SonetTraceabilityUnknown(2) , + t1SonetStratum2Traceable(3) , + t1SonetTransitNodeClock(4) , + t1SonetStratum3eTraceable(5) , + t1SonetStratum3Traceable(6) , + t1SonetMinClockTraceable(7) , + t1SonetDus(8) , + e1SdhTraceabilityUnknown(9) , + e1SdhSsmTransitNodeClockG812(10) , + e1SdhDus(11) , + e1SdhSsmPrimaryReferenceClockG811(12) , + e1SdhSsmLocalG812(13) , + e1SdhSsmSyncEquipmentTimingSource(14) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The S(ynchronization) S(tatus) M(essage) is sent over + the SONET/SDH line to tell the other end about the + quality of clock being sent over the line. + + t1SonetPrimaryReferenceSource(1) - SONET Primary Reference Source + t1SonetTraceabilityUnknown(2} - SONET Traceability Unknown + t1SonetStratum2Traceable(3) - SONET Stratum 2 Traceable + t1SonetTransitNodeClock(4) - SONET Transit Node Clock + t1SonetStratum3eTraceable(5) - SONET Stratum 3e Traceable + t1SonetStratum3Traceable(6) - SONET Stratum 3 Traceable + t1SonetMinClockTraceable(7) - SONET Minimum Clock Traceable + t1SonetDus(8) - SONET Do not Use for Synchronization + e1SdhTraceabilityUnknown(9) - SDH Traceability Unknown + e1SdhSsmTransitNodeClockG812(10) - SDH Transit Node Clock G812 + e1SdhDus(11) - SDH Do not Use for Synchronization + e1SdhSsmPrimaryReferenceClockG811(12) - SDH Primary Reference Clock G811 + e1SdhSsmLocalG812(13) - SDH Local G812 + e1SdhSsmSyncEquipmentTimingSource(14) - SDH Synchronization Equipment Timing Source" + DEFVAL { t1SonetTraceabilityUnknown } + ::= { snPOSInfo2Entry 6 } + +snPOSInfo2Encapsulation OBJECT-TYPE + SYNTAX INTEGER { + ppp(1), + hdlc(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Layer 2 encapsulation on the POS interface + ppp(1) - Point to Point Protocol (PPP) + hdlc(2) - Cisco High-level Data Link Control (cHDLC)" + DEFVAL { ppp } + ::= { snPOSInfo2Entry 7 } + +snPOSInfo2AlarmMonitoring OBJECT-TYPE + SYNTAX INTEGER { + off(0), + on(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Alarm Monitoring on POS interface + off(0) - Alarm Monitoring is off + on(1) - Alarm Montioring is on" + DEFVAL { on } + ::= { snPOSInfo2Entry 8 } + +snPOSInfo2OverheadJ0ExpectedMessage OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Overhead J0 Expected Message" + ::= { snPOSInfo2Entry 9 } + +snPOSInfo2OverheadJ0TransmitMessage OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Overhead J0 Transmit Message" + ::= { snPOSInfo2Entry 10 } + +snPOSInfo2OverheadJ1ExpectedMessage OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Overhead J1 Expected Message" + ::= { snPOSInfo2Entry 11 } + +snPOSInfo2OverheadJ1MessageLength OBJECT-TYPE + SYNTAX INTEGER { + s16 (16), + s64 (64) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Overhead J1 Length of Message + s16(16)...........16 bytes + s64(64)............64 bytes" + DEFVAL { s64 } + ::= { snPOSInfo2Entry 12 } + +snPOSInfo2OverheadJ1TransmitMessage OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (16..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Overhead J1 Transmit Message" + ::= { snPOSInfo2Entry 13 } + +-- POS PPP Group +-- If the L2 encapsulation is PPP, the following will provide +-- information on the states of various control protocols + +snPOSPPPTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnPOSPPPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An snPOSPPPTable consists of a number of + SnPOSPPPEntry entries" + ::= { snPOSInfo 3 } + +snPOSPPPEntry OBJECT-TYPE + SYNTAX SnPOSPPPEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the snPOSPPPTable indicates the + PPP control protocol status on a specified port" + INDEX { + ifIndex + } + ::= { snPOSPPPTable 1 } + +SnPOSPPPEntry ::= SEQUENCE { + snPosPppLcp + DisplayString, + snPosPppIpCp + DisplayString, + snPosPppIpv6Cp + DisplayString, + snPosPppOsInLcp + DisplayString, + snPosPppMpLscp + DisplayString + } + +snPosPppLcp OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PPP Link Control Protocol state" + ::= { snPOSPPPEntry 1 } + +snPosPppIpCp OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PPP IP Control Protocol state" + ::= { snPOSPPPEntry 2 } + +snPosPppIpv6Cp OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PPP IPv6 Control Protocol state" + ::= { snPOSPPPEntry 3 } + +snPosPppOsInLcp OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PPP OSI Network Layer Control Protocol state" + ::= { snPOSPPPEntry 4 } + +snPosPppMpLscp OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The PPP MPLS Control Protocol state" + ::= { snPOSPPPEntry 5 } + +-- POS cHDLC Group +-- If the L2 encapsulation is cHDLC, the following will provide +-- information various cHDLC paraemters + +snPOScHDLCTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnPOScHDLCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An snPOScHDLCTable consists of a number of + SnPOScHDLCEntry entries" + ::= { snPOSInfo 4 } + +snPOScHDLCEntry OBJECT-TYPE + SYNTAX SnPOScHDLCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in snPOScHDLCEntry shows the + cHDLC information on a specified port" + INDEX { + ifIndex + } + ::= { snPOScHDLCTable 1 } + +SnPOScHDLCEntry ::= SEQUENCE { + snPOScHDLCLineState + INTEGER, + snPOScHDLCInLoopback + INTEGER, + snPOScHDLCMySeq + Unsigned32, + snPOScHDLCMySeqSeen + Unsigned32, + snPOScHDLCPeerSeqSeen + Unsigned32, + snPOScHDLCUniqueSent + Unsigned32, + snPOScHDLCUniqueReceived + Unsigned32 + } + +snPOScHDLCLineState OBJECT-TYPE + SYNTAX INTEGER { + down (0), + up (1), + unknown (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC Line State" + ::= { snPOScHDLCEntry 1 } + +snPOScHDLCInLoopback OBJECT-TYPE + SYNTAX INTEGER { + no (0), + yes (1), + unknown (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC in loopback" + ::= { snPOScHDLCEntry 2 } + +snPOScHDLCMySeq OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC my sequence number" + ::= { snPOScHDLCEntry 3 } + +snPOScHDLCMySeqSeen OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC my sequence number seen" + ::= { snPOScHDLCEntry 4 } + +snPOScHDLCPeerSeqSeen OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC peer sequence number seen" + ::= { snPOScHDLCEntry 5 } + +snPOScHDLCUniqueSent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC unique sent" + ::= { snPOScHDLCEntry 6 } + +snPOScHDLCUniqueReceived OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "cHDLC unique received" + ::= { snPOScHDLCEntry 7 } + +END +-- ***************************************************************** +-- Commited Access Rate MIB file. +-- ***************************************************************** -- cgit v1.2.3