From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cisco/CISCO-SWITCH-ENGINE-MIB | 7037 ++++++++++++++++++++++++++++++++++++ 1 file changed, 7037 insertions(+) create mode 100644 MIBS/cisco/CISCO-SWITCH-ENGINE-MIB (limited to 'MIBS/cisco/CISCO-SWITCH-ENGINE-MIB') diff --git a/MIBS/cisco/CISCO-SWITCH-ENGINE-MIB b/MIBS/cisco/CISCO-SWITCH-ENGINE-MIB new file mode 100644 index 0000000..7e602e5 --- /dev/null +++ b/MIBS/cisco/CISCO-SWITCH-ENGINE-MIB @@ -0,0 +1,7037 @@ +-- ***************************************************************** +-- Cisco Switch Engine MIB +-- +-- February 2000, Steven To +-- July 2000, Edward Pham +-- February 2002, Edward Pham +-- February 2003, Edward Pham +-- May 2003, Jayakumar Kadirvelu +-- August 2003, Edward Pham +-- %DNP% March 2005, Jayakumar Kadirvelu +-- +-- Copyright (c) 2000-2020 by cisco Systems Inc. +-- by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + +CISCO-SWITCH-ENGINE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + Gauge32, + Counter32, + Counter64, + IpAddress, + Integer32, + Unsigned32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF + ifIndex, + OwnerString, + InterfaceIndexOrZero + FROM IF-MIB + InetAddressType, + InetAddress + FROM INET-ADDRESS-MIB + entPhysicalIndex + FROM ENTITY-MIB + TEXTUAL-CONVENTION, + DisplayString, + RowStatus, + TimeInterval, + MacAddress, + TruthValue, + TimeStamp + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + MplsVpnId + FROM MPLS-VPN-MIB + CiscoNetworkProtocol, + CiscoPort + FROM CISCO-TC + VlanIndex + FROM CISCO-VTP-MIB + ciscoMgmt + FROM CISCO-SMI; + + +ciscoSwitchEngineMIB MODULE-IDENTITY + LAST-UPDATED "202005260000Z" + ORGANIZATION "Cisco Systems Inc." + CONTACT-INFO + "Cisco Systems + Customer Service + + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-lan-switch-snmp@cisco.com" + DESCRIPTION + "This MIB module defines management objects for Cisco Layer 2/3 + switches. These devices may either have a single (central) switching + engine entity or may consist of multiple (distributed) switching + engine entities which are inter-connected via a common 'switching + fabric'. In the central switching engine model, all the physical + ports in the system are handled by the only switching engine in the + system. In the distributed switching model, each switching engine + will handle a set of 'local' physical ports and when necessary, + packets are also switched between switching engines over the + switching fabric. + + Cisco L2/L3 switching devices use regular routers to assist them + in learning packet 'flows' by observing how a router routes a + candidate flow. A flow is some combination of source network address, + destination network address and the transport port numbers, as + applicable. Once a flow is established (learned), all traffic + belonging to that flow will be switched at Layer 3 by the switch + engine, effectively bypassing the router, until the flow has been + 'aged' out. Most Cisco L2/L3 switching devices employ built-in + (internal) router module(s) for integrating Layer 3 switching with + Layer 2 forwarding. However, they can also learn 'flows' through + other physically-separate (external) Cisco routers that are + connected to the switch-engine through the network." + REVISION "202005260000Z" + DESCRIPTION + "Add enumerated value 304 - 308 to cseTcamResourceType." + REVISION "202003060000Z" + DESCRIPTION + "Add enumerated value 282 - 303 to cseTcamResourceType." + REVISION "201907110000Z" + DESCRIPTION + "Add enumerated value 232 - 281 to cseTcamResourceType." + REVISION "201806200000Z" + DESCRIPTION + "Add enumerated value 229 - 231 to cseTcamResourceType." + REVISION "201712070000Z" + DESCRIPTION + "Add enumerated value 86 - 228 to cseTcamResourceType." + REVISION "201302130000Z" + DESCRIPTION + "Add enumerated value 37 - 85 to cseTcamResourceType." + REVISION "201203120000Z" + DESCRIPTION + "Add cseStatisticsFlowGroup1." + REVISION "201012170000Z" + DESCRIPTION + "Add the following new enumerations to cseTcamResourceType: + dgtSgtRegion(31), anyAnyRegion(32), tcamALabel(33), + tcamBLabel(34), destInfoIn(35) and destInfoOut(36)." + REVISION "200811110000Z" + DESCRIPTION + "Add new enumerations to cseTcamResourceType." + REVISION "200801290000Z" + DESCRIPTION + "Add cseL3SwitchedPktsPerSecGroup. + + Add cseCacheStatisticsGroup. + + Add new enumerations to cseTcamResourceType. + + Add new enumerations to cseFlowIPFlowMask object." + REVISION "200509160000Z" + DESCRIPTION + "Add cseFlowMcastMgmtGroup2. + + Deprecate the objects: + cseFlowMcastQuerySrc, + cseFlowMcastQueryGrp, + cseFlowMcastResultGrp, + cseFlowMcastResultSrc. + + Add new enumerations to cseFlowMcastQueryMask." + REVISION "200504120000Z" + DESCRIPTION + "Add new enumerations to cseFlowIPFlowMask object. + Add ingressInterfaceMapping and egressInterfaceMapping + enumerations to cseTcamResourceType object." + REVISION "200411150000Z" + DESCRIPTION + "Add cseMetUsageGroup." + REVISION "200406090000Z" + DESCRIPTION + "Add the following Groups: + cseNetflowASInfoExportGroup + cseNetflowPerVlanIfGroup" + REVISION "200311070000Z" + DESCRIPTION + "Add cseErrorStatsLCTable." + REVISION "200308200000Z" + DESCRIPTION + "Add the following tables to support forwarding information base: + cseCefFibTable, + cseCefAdjacencyTable. + + Add the following table to support TCAM (Ternary Content + Addressable Memory) resource usage: + cseTcamUsageTable. + + Add default value for the following objects: + cseFlowQuerySource, + cseFlowQuerySourceMask, + cseFlowQueryDestination, + cseFlowQueryDestinationMask, + cseFlowQueryOwner." + REVISION "200306100000Z" + DESCRIPTION + "Deprecated the objects: + cseNetflowLSExportHost, + cseNetflowLSExportTransportNumber" + REVISION "200305060000Z" + DESCRIPTION + "Added the object cseFlowQuerySkipNFlows" + REVISION "200302210000Z" + DESCRIPTION + "Added the following objects and table: + cseFlowLongAgingTime, + cseNetFlowIfIndexEnable, + cseFlowStatsTable, + cseFlowExcludeTable. + Modified the description of the following objects: + cseL2IpPkts, + cseL2IpxPkts, + cseL2AssignedProtoPkts, + cseL2OtherProtoPkts, + cseL2HCIpPkts, + cseL2HCIpxPkts, + cseL2HCAssignedProtoPkts, + cseL2HCOtherProtoPkts." + REVISION "200208050000Z" + DESCRIPTION + "Added the following objects: cseFlowIPFlowMask, + cseFlowIPXFlowMask, cseProtocolFilterEnable." + REVISION "200202070000Z" + DESCRIPTION + "Added the objects in cseBridgedFlowStatsCtrlTable and + cseErrorStatsTable. + + Added the following objects: + cseL3VlanInUnicastPkts + cseL3VlanInUnicastOctets + cseL3VlanOutUnicastPkts + cseL3VlanOutUnicastOctets." + REVISION "200110260000Z" + DESCRIPTION + "Added the object cseFlowQueryTotalFlows" + REVISION "200109130000Z" + DESCRIPTION + "Added the follwowing objects + o cseNetflowLSFilterSupport + o cseNetflowLSFilterTable. + Also created the new groups + o cseNDEMandatoryGroup + o cseNDESingleFilterGroup + o cseNDEMultipleFiltersGroup" + REVISION "200105160000Z" + DESCRIPTION + "Added 4k Vlan support" + REVISION "200103090000Z" + DESCRIPTION + "Update the range of cseFlowEstablishedAgingTime, + cseFlowIPXEstablishedAgingTime, cseFlowOperEstablishedAgingTime, + cseFlowOperIPXAgingTime. + Replace cseFlowQueryResult with cseFlowQueryResultingRows." + REVISION "200006230000Z" + DESCRIPTION + "Added the following objects: + o cseFlowOperEstablishedAgingTime. + o cseFlowOperFastAgingTime. + o cseFlowOperFastAgePktThreshold. + o cseFlowOperIPXAgingTime." + REVISION "200001311130Z" + DESCRIPTION + "Added one High Capacity L2 Statistics table, an extension + of cseL2StatsTable and new objects in NetflowLS group for + new netflow export features. Also added a new enum type of + cseRouterFlowMask to support L3 multicast." + REVISION "9912091130Z" + DESCRIPTION + "Added MIB objects to manage Switch Engine (SE) portion of + Multicast MLS control protocol." + REVISION "9806241130Z" + DESCRIPTION + "Added 2 groups, for the purging (clearing) of layer 3 unicast and + multicast flow entries stored in the cache. Also added new objects + for layer 3 flow statistics." + REVISION "9805281130Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 97 } + + +-- Overview of MIB Objects: +-- +-- Defines 9 groups of objects. +-- +-- 1. cseL2Objects: Contains mainly Layer 2 statistics maintained by the +-- switching engine hardware. +-- +-- 2. cseFlow: This group has all the important objects used in the +-- management of switching engine hardware. It contains : +-- - Scalars for configuring aging times that determine how long +-- certain learned flows, are used for L3 switching its traffic. +-- - A table of all routers whose "flows" are learned by the +-- switching +-- engine. +-- - A table for adding external routers to the router table and +-- enabling +-- the switching engine to learn of all the flows through those +-- routers. +-- - A table listing the MAC address and VLAN number used for each +-- router. +-- - A query/result table pair for monitoring the switching +-- performance +-- of the switching engine(s). +-- - A control table for enabling/disabling the flow switching +-- feature +-- per protocol type (ip, ipx). +-- +-- 3. cseNetflowLS: A group of objects used to manage +-- the Netflow LAN Switching data export feature. +-- +-- 4. cseL3Objects: Contains +-- - L3 statistics maintained by the switching engine hardware. +-- - L3 packet/octets statistics (in/out) maintained per vlan. +-- +-- 5. cseProtocolFilter: Contains +-- - Table for configuring protocol filters per (non-trunking) port. +-- +-- 6. cseUcastCache: Contains +-- - a MIB table to perform actions of purging IP/IPX +-- flows in switch engine cache pools. +-- +-- 7. cseMcastCache: +-- - a MIB table to perform actions of purging IP +-- multicast flows in switch engine caches. +-- +-- 8. cseCef: CEF (Cisco Express Forwarding) group. It contains: +-- - tables provide information on IP forwarding database +-- and statistics. +-- +-- 9. cseTcamUsage: Contains +-- - table provides resource usage information on TCAM (Ternary +-- Content Addressable Memory) in the device. +-- +-- 10. cseMet: MET group. It contains: +-- - table provides resource usage information on MET (Multicast +-- Expansion Table) in the device. + +cseMIBObjects OBJECT IDENTIFIER + ::= { ciscoSwitchEngineMIB 1 } + +-- object groups + +cseL2Objects OBJECT IDENTIFIER + ::= { cseMIBObjects 1 } + +cseFlow OBJECT IDENTIFIER + ::= { cseMIBObjects 2 } + +cseNetflowLS OBJECT IDENTIFIER + ::= { cseMIBObjects 3 } + +cseL3Objects OBJECT IDENTIFIER + ::= { cseMIBObjects 4 } + +cseProtocolFilter OBJECT IDENTIFIER + ::= { cseMIBObjects 5 } + +cseUcastCache OBJECT IDENTIFIER + ::= { cseMIBObjects 6 } + +cseMcastCache OBJECT IDENTIFIER + ::= { cseMIBObjects 7 } + +cseCef OBJECT IDENTIFIER + ::= { cseMIBObjects 8 } + +cseTcamUsage OBJECT IDENTIFIER + ::= { cseMIBObjects 9 } + +cseMet OBJECT IDENTIFIER + ::= { cseMIBObjects 10 } + + +CiscoGauge64 ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This TC describes an object with a nonnegative integer value + that may increase or decrease, with a maximum value of 2^64-1." + SYNTAX Counter64 + +ControlStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This TC describes the current status of a controlled object + value." + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + +McastGroupIp ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d" + STATUS current + DESCRIPTION + "This TC specifies an multicast group IP address, + a class D IP address with the first byte in the range of + 224 to 239." + SYNTAX IpAddress + +FlowAddressComponent ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x:" + STATUS current + DESCRIPTION + "Represents a network layer address. The length and format of + the address is protocol dependent as follows: + ip 6 octets + first 4 octets are the IP address in network + order + last 2 bytes is the transport's port number. + ipx 10 octets + first 4 octets are the net number + last 6 octets are the host number" + SYNTAX OCTET STRING (SIZE (6..6 | 10..10)) +-- Layer 2 statistics per switching engine + +cseL2StatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseL2StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing switching engine's L2 statistics counters." + ::= { cseL2Objects 1 } + +cseL2StatsEntry OBJECT-TYPE + SYNTAX CseL2StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row containing L2 statistics maintained by a + switching engine (identified by entPhysicalIndex). + Each switching engine managed by this MIB module has an + entry in this table." + INDEX { entPhysicalIndex } + ::= { cseL2StatsTable 1 } + +CseL2StatsEntry ::= SEQUENCE { + cseL2ForwardedLocalPkts Counter32, + cseL2ForwardedLocalOctets Counter64, + cseL2ForwardedTotalPkts Counter32, + cseL2NewAddressLearns Counter32, + cseL2AddrLearnFailures Counter32, + cseL2DstAddrLookupMisses Counter32, + cseL2IpPkts Counter32, + cseL2IpxPkts Counter32, + cseL2AssignedProtoPkts Counter32, + cseL2OtherProtoPkts Counter32 +} + +cseL2ForwardedLocalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets received from ports local to this switching + engine and forwarded at layer 2." + ::= { cseL2StatsEntry 1 } + +cseL2ForwardedLocalOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in the packets received from ports local to this + switching engine and forwarded at layer 2." + ::= { cseL2StatsEntry 2 } + +cseL2ForwardedTotalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of packets received from all sources (local and over + the fabric) and forwarded at layer 2 by this switching engine." + ::= { cseL2StatsEntry 3 } + +cseL2NewAddressLearns OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of new MAC addresses learned by the switching engine." + ::= { cseL2StatsEntry 4 } + +cseL2AddrLearnFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of MAC addresses failed to be learned because the L2 + forwarding address table was full. If the value keeps increasing, + the network topology should be reconfigured." + ::= { cseL2StatsEntry 5 } + +cseL2DstAddrLookupMisses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of misses during destination MAC address table lookups. + A few misses happen normally. Large numbers of misses occur as + a result of cseL2AddrLearnFailures." + ::= { cseL2StatsEntry 6 } + +cseL2IpPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to the IP family received by this + switching engine from all sources. This value includes L3 + switched packets." + ::= { cseL2StatsEntry 7 } + +cseL2IpxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to the IPX family received by this + switching engine from all sources. This value includes L3 + switched packets." + ::= { cseL2StatsEntry 8 } + +cseL2AssignedProtoPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to an assigned group of network + protocols (typically AppleTalk, DecNet and Vines) received + by this switching engine from all sources. + This value includes L3 switched packets." + ::= { cseL2StatsEntry 9 } + +cseL2OtherProtoPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to all other protocol families, + received by this switching engine from all sources. + This value includes L3 switched packets." + ::= { cseL2StatsEntry 10 } + + +-- High Capacity extensions for cseL2StatsTable. + +cseL2StatsHCTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseL2StatsHCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains the High Capacity L2 Statistics extensions to the + cseL2StatsTable." + ::= { cseL2Objects 2 } + +cseL2StatsHCEntry OBJECT-TYPE + SYNTAX CseL2StatsHCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains the High Capacity L2 Statistics extensions to + cseL2StatsEntry. These objects will be created by the agent + for all cseL2StatsEntries it deems appropriate." + INDEX { entPhysicalIndex } + ::= { cseL2StatsHCTable 1 } + +CseL2StatsHCEntry ::= SEQUENCE { + cseL2HCOverflowForwardedLocalPkts Counter32, + cseL2HCForwardedLocalPkts Counter64, + cseL2HCOverflowForwardedTotalPkts Counter32, + cseL2HCForwardedTotalPkts Counter64, + cseL2HCOverflowIpPkts Counter32, + cseL2HCIpPkts Counter64, + cseL2HCOverflowIpxPkts Counter32, + cseL2HCIpxPkts Counter64, + cseL2HCOverflowAssignedProtoPkts Counter32, + cseL2HCAssignedProtoPkts Counter64, + cseL2HCOverflowOtherProtoPkts Counter32, + cseL2HCOtherProtoPkts Counter64 +} + +cseL2HCOverflowForwardedLocalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2ForwardedLocalPkts + counter has overflowed." + ::= { cseL2StatsHCEntry 1 } + +cseL2HCForwardedLocalPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets received from ports local to this switching + engine and forwarded at layer 2." + ::= { cseL2StatsHCEntry 2 } + +cseL2HCOverflowForwardedTotalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2ForwardeTotalPkts counter + has overflowed." + ::= { cseL2StatsHCEntry 3 } + +cseL2HCForwardedTotalPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of packets received from all sources + (local and over the fabric) and forwarded at layer 2 + by this switching engine." + ::= { cseL2StatsHCEntry 4 } + +cseL2HCOverflowIpPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2IpPkts counter + has overflowed." + ::= { cseL2StatsHCEntry 5 } + +cseL2HCIpPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to the IP family received by this + switching engine from all sources. This value includes + L3 switched packets." + ::= { cseL2StatsHCEntry 6 } + +cseL2HCOverflowIpxPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2IpxPkts counter + has overflowed." + ::= { cseL2StatsHCEntry 7 } + +cseL2HCIpxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to the IPX family received by this + switching engine from all sources. + This value includes L3 switched packets." + ::= { cseL2StatsHCEntry 8 } + +cseL2HCOverflowAssignedProtoPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2HCAssignedProtoPkts + counter has overflowed." + ::= { cseL2StatsHCEntry 9 } + +cseL2HCAssignedProtoPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to an assigned group of network + protocols (typically AppleTalk, DecNet and Vines) received + by this switching engine from all sources. + This value includes L3 switched packets." + ::= { cseL2StatsHCEntry 10 } + +cseL2HCOverflowOtherProtoPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times the associated cseL2HCOtherProtoPkts + counter has overflowed." + ::= { cseL2StatsHCEntry 11 } + +cseL2HCOtherProtoPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets belonging to all other protocol families, + received by this switching engine from all sources. This value + includes L3 switched packets." + ::= { cseL2StatsHCEntry 12 } + + + +-- Flow group of objects +-- +-- Global aging times for the flows learned + +cseFlowEstablishedAgingTime OBJECT-TYPE + SYNTAX Integer32 (1..65535) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The adminstrative aging time for IP established flows. + The default value for this object is implementation specific. + If the cseFlowEstablishedAgingTime is not configured to the + appropriate value, it will be adjusted to the closest value. + The corresponding operational object, taken effect on the + a device, is cseFlowOperIPEstablishedAgingTime." + ::= { cseFlow 1 } + +cseFlowFastAgingTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative fast aging time for the established flow + entries, that have less number of packets than the value set in + the cseFlowFastAgePktThreshold, switched within this time. + Setting to value of 0 turns off fast aging. + + The default value for this object is implementation specific. + If the cseFlowFastAgingTime is not configured to the + appropriate value, it will be adjusted to the closest value. + The corresponding operational object, taken effect on the + device, is cseFlowOperFastAgingTime." + ::= { cseFlow 2 } + +cseFlowFastAgePktThreshold OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative packet threshold setting for the + cseFlowFastAgingTime. The default for Fast Aging Packet + Threshold is 0, i.e. no packets switched within the time + set in cseFlowFastAgingTime, after an L3 flow was established. + If the cseFlowFastAgingTime is not configured to the + appropriate value, it will be adjusted to the closest value. + The corresponding operational object, taken effect on the + device, is cseFlowOperFastAgePktThreshold." + ::= { cseFlow 3 } +-- Router Table + +cseRouterTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information about all routers that are + discovered by the switch, including internal and external + routers." + ::= { cseFlow 4 } + +cseRouterEntry OBJECT-TYPE + SYNTAX CseRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseRouterTable containing information + about a router. A row appears either directly through dynamic + learning or indirectly through management configuration + (via SNMP,by creating an entry in the + cseStaticExtRouterTable or via CLI)." + INDEX { cseRouterIndex } + ::= { cseRouterTable 1 } + +CseRouterEntry ::= SEQUENCE { + cseRouterIndex IpAddress, + cseRouterFlowMask INTEGER, + cseRouterName DisplayString, + cseRouterStatic TruthValue, + cseRouterIpxFlowMask INTEGER +} + +cseRouterIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The router's IP address which is used to uniquely identify + it for L3 flows." + ::= { cseRouterEntry 1 } + +cseRouterFlowMask OBJECT-TYPE + SYNTAX INTEGER { + dstOnly(1), + srcDst(2), + fullFlow(3), + notApplicable(4), + srcDstVlan(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP type of mask configured for the router represented by + this row. Each flow known to the switching engine has a mask + which is applied to all packets in order to compare them to + that flow. Each hardware-learned flow has the mask configured + for the router which logically forwards that flow." + ::= { cseRouterEntry 2 } + +cseRouterName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DNS name (if available) of the router." + ::= { cseRouterEntry 3 } + +cseRouterStatic OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the value of the object is true, this router was + configured via SNMP or CLI. Otherwise, this router was + learned automatically." + ::= { cseRouterEntry 4 } + +cseRouterIpxFlowMask OBJECT-TYPE + SYNTAX INTEGER { + dstOnly(1), + srcDst(2), + fullFlow(3), + notApplicable(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IPX type of mask configured for the router represented by + this row. Each flow known to the switching engine has a mask + which is applied to all packets in order to compare them to + that flow. Each hardware-learned flow has the mask configured + for the router which logically forwards that flow." + ::= { cseRouterEntry 5 } + + +-- Table of external routers that are enabled. + +cseStaticExtRouterTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseStaticExtRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of external routers which are enabled for Layer 3 IP + switching by the switching engine. This table may contain + routers that have not yet been discovered by the device." + ::= { cseFlow 5 } + +cseStaticExtRouterEntry OBJECT-TYPE + SYNTAX CseStaticExtRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseStaticExtRouterTable for + enabling an external router to be installed in the switch's + router table. The entry is created and deleted by using + cseStaticRouterStatus." + INDEX { cseRouterIndex } + ::= { cseStaticExtRouterTable 1 } + +CseStaticExtRouterEntry ::= SEQUENCE { + cseStaticRouterName DisplayString, + cseStaticRouterOwner OwnerString, + cseStaticRouterStatus RowStatus, + cseStaticRouterType BITS +} + +cseStaticRouterName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DNS name (if available) of the external router." + ::= { cseStaticExtRouterEntry 1 } + +cseStaticRouterOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "String indicating the owner who created the static entry." + ::= { cseStaticExtRouterEntry 2 } + +cseStaticRouterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to manage creation and deletion of rows in this table. + Once a row becomes active, values within that row cannot be + modified except by deleting and creating the row." + ::= { cseStaticExtRouterEntry 3 } + +-- per Router, per VLAN MAC address table for the flows + +cseStaticRouterType OBJECT-TYPE + SYNTAX BITS { + unicast(0), + multicast(1) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates if the router is included for unicast switching, + or multicast switching, or both." + DEFVAL { { unicast } } + ::= { cseStaticExtRouterEntry 4 } + + + +cseRouterVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseRouterVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table listing the MAC address used by routers on + particular VLANs." + ::= { cseFlow 6 } + +cseRouterVlanEntry OBJECT-TYPE + SYNTAX CseRouterVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of the cseRouterVlanTable. + An entry exists for each known VLAN of each known router." + INDEX { + cseRouterIndex, + cseRouterMac, + cseRouterVlan + } + ::= { cseRouterVlanTable 1 } + +CseRouterVlanEntry ::= SEQUENCE { + cseRouterMac MacAddress, + cseRouterVlan VlanIndex, + cseRouterProtocol BITS +} + +cseRouterMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mac address used by the router for this VLAN number." + ::= { cseRouterVlanEntry 1 } + +cseRouterVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Vlan number associated with the router's MAC address." + ::= { cseRouterVlanEntry 2 } + +cseRouterProtocol OBJECT-TYPE + SYNTAX BITS { + ip(0), + ipx(1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates which protocols are routed by this router on this + VLAN using this Mac address." + ::= { cseRouterVlanEntry 3 } + + + +-- Unicast Flow Query table + +cseFlowMaxQueries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum number of query entries allowed to be outstanding at + any time, in the cseFlowQueryTable. The typical value for + this object is 5." + ::= { cseFlow 7 } + +cseFlowQueryTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowQueryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A control table used to query the switching engine by + specifying retrieval criteria for L3 flows. + The resulting data for each instance of a query in this + table is returned in the cseFlowDataTable. + The maximum number of entries (rows) in this table + cannot exceed the value returned by cseFlowMaxQueries." + ::= { cseFlow 8 } + +cseFlowQueryEntry OBJECT-TYPE + SYNTAX CseFlowQueryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of the cesFlowQueryTable used to setup + retrieval criteria to search for L3 flows on a particular + switching engine entity identified by entPhysicalIndex. + The actual search is started by setting the value of + cseFlowQueryStatus to 'active'. Once a row becomes active, + values within the row cannot be modified, except by + deleting and re-creating the row." + INDEX { + entPhysicalIndex, + cseFlowQueryIndex + } + ::= { cseFlowQueryTable 1 } + +CseFlowQueryEntry ::= SEQUENCE { + cseFlowQueryIndex Unsigned32, + cseFlowQueryMask INTEGER, + cseFlowQueryTransport BITS, + cseFlowQuerySource FlowAddressComponent, + cseFlowQuerySourceMask FlowAddressComponent, + cseFlowQueryDestination FlowAddressComponent, + cseFlowQueryDestinationMask FlowAddressComponent, + cseFlowQueryRouterIndex IpAddress, + cseFlowQueryOwner OwnerString, + cseFlowQueryResultingRows Integer32, + cseFlowQueryResultTotalPkts CiscoGauge64, + cseFlowQueryResultTotalOctets CiscoGauge64, + cseFlowQueryResultAvgDuration TimeInterval, + cseFlowQueryResultAvgIdle TimeInterval, + cseFlowQueryStatus RowStatus, + cseFlowQueryCreateTime TimeStamp, + cseFlowQueryTotalFlows Unsigned32, + cseFlowQuerySkipNFlows Integer32 +} + +cseFlowQueryIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer which uniquely identifies the control + query among all those specified for the switching engine + indicated by entPhysicalIndex." + ::= { cseFlowQueryEntry 1 } + +cseFlowQueryMask OBJECT-TYPE + SYNTAX INTEGER { + dstOnly(1), + srcOrDst(2), + srcAndDst(3), + fullFlow(4), + ipxDstOnly(5), + ipxSrcAndDst(6), + any(7) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting each value causes the appropriate action: + + 'dstOnly' - causes the creation of rows in the + cseFlowDataTable corresponding to the current L3 flow + information for the absolute destination IP address + set in the cseFlowQueryDestination object in this table. + If cseFlowQueryDestinationMask is also specified at the + same time, it will be applied to the address part of + cseFlowQueryDestination. + + 'srcOrDst' - causes the creation of rows in the + cseFlowDataTable corresponding to the current L3 flow + information for EITHER of the absolute IP addresses set in + the cseFlowQueryDestination or cseFlowQuerySource objects. + If either of cseFlowQueryDestinationMask and + cseFlowQuerySourceMask + objects are also specified at the same time, + they will be applied to the respective address parts + of cseFlowQueryDestination and cseFlowQuerySource + objects. This option is typically used to + setup queries for flows on traffic in either directions. + + 'srcAndDst' - causes the creation of rows in the + cseFlowDataTable corresponding to the current L3 flow + information for BOTH the absolute IP addresses set in + the cseFlowQueryDestination and cseFlowQuerySource objects. + If either of cseFlowQueryDestinationMask and + cseFlowQuerySourceMask objects are also specified + at the same time, they will be applied to the + respective address parts of cseFlowQueryDestination and + cseFlowQuerySource objects. This option is typically used to + setup queries for flows on traffic in one direction only. + + + 'fullFlow' - causes the creation of row(s) in the + cseFlowDataTable exactly corresponding to the current + L3 flow information for the complete IP flow (including the + transport port numbers) set in the cseFlowQueryDestination and + cseFlowQuerySource objects. If either of + cseFlowQueryDestinationMask and cseFlowQuerySourceMask + objects are also specified at the same + time, they will be applied to the respective address parts of + cseFlowQueryDestination and cseFlowQuerySource objects. + This option is typically used to setup queries for flows + on traffic for specific (TCP/UDP) port numbers + corresponding to standard protocols such as FTP, + WWW, TELNET, etc. + + 'ipxDstOnly' - causes the creation of rows in the + cseFlowDataTable corresponding to the current L3 flow + information for the absolute destination IPX address + set in the cseFlowQueryDestination object in this table. + If cseFlowQueryDestinationMask is also specified at + the same time, it will be applied to the address part + of cseFlowQueryDestination. + + 'ipxSrcAndDst' - causes the creation of rows in the + cseFlowDataTable corresponding to the current L3 flow + information for BOTH the absolute IPX addresses set in + the cseFlowQueryDestination and cseFlowQuerySource objects. + If either of cseFlowQueryDestinationMask and + cseFlowQuerySourceMask objects are also specified at the + same time, they will be applied to the respective address + parts of cseFlowQueryDestination and + cseFlowQuerySource objects. + + 'any' - returns all rows corresponding to all established + flow entries in the cseFlowDataTable. + + Note: + 1. The type FlowAddressComponent used for objects + cseFlowQuerySource and cseFlowQueryDestination, has the + network address part and also the transport port + number part, if applicable. + 2. The value of this object cannot be modified when the + corresponding instance of cseFlowQueryStatus is 'active'." + DEFVAL { any } + ::= { cseFlowQueryEntry 2 } + +cseFlowQueryTransport OBJECT-TYPE + SYNTAX BITS { + udp(0), + tcp(1) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP transport protocol type specified for this query. Ignored + for IPX flow queries. The value of this object cannot be + modified when the corresponding instance of cseFlowQueryStatus + is 'active'." + DEFVAL { { udp , tcp } } + ::= { cseFlowQueryEntry 3 } + +cseFlowQuerySource OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source network address and port (if applicable). The + value of this object cannot be modified when the + corresponding instance of + cseFlowQueryStatus is 'active'." + DEFVAL { '000000000000'H } + ::= { cseFlowQueryEntry 4 } + +cseFlowQuerySourceMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source address mask to be applied to the corresponding + instance of cseFlowQuerySource. The value of this object + cannot be modified when the corresponding instance of + cseFlowQueryStatus is 'active'." + DEFVAL { 'FFFFFFFFFFFF'H } + ::= { cseFlowQueryEntry 5 } + +cseFlowQueryDestination OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination network address and port (if applicable). + The value of this object cannot be modified when the + corresponding instance of cseFlowQueryStatus is 'active'." + DEFVAL { '000000000000'H } + ::= { cseFlowQueryEntry 6 } + +cseFlowQueryDestinationMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination address mask to be applied to the corresponding + instance of cseFlowQueryDestination. The value of this object + cannot be modified when the corresponding instance of + cseFlowQueryStatus is 'active'." + DEFVAL { 'FFFFFFFFFFFF'H } + ::= { cseFlowQueryEntry 7 } + +cseFlowQueryRouterIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Index of the router for which the flows are available. + An 'all-zero' IP address indicates that the query is for + any router. The value of this object cannot be modified + when the corresponding instance of cseFlowQueryStatus + is 'active'." + ::= { cseFlowQueryEntry 8 } + +cseFlowQueryOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The manager entity that configured this entry and is therefore + using the resources assigned to it." + DEFVAL { "" } + ::= { cseFlowQueryEntry 9 } + +cseFlowQueryResultingRows OBJECT-TYPE + SYNTAX Integer32 (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The result status of the query. Possible values are: + + -1 - Either the query has not been initiated or + the agent is busy processing this query instance. + Time to completion of the query processing + depends on the complexity of the query and + the number of matches that satisfy this query. + + 0..2147483647 - The search has ended and this is the number of + rows in the cseFlowDataTable, resulting + from this query." + ::= { cseFlowQueryEntry 10 } + +cseFlowQueryResultTotalPkts OBJECT-TYPE + SYNTAX CiscoGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The aggregate number of total packets switched by the system on + all the flows matching this query. This is a snapshot value and + is valid only when the corresponding instance of + cseFlowQueryResultingRows is greater than or equal to 0." + ::= { cseFlowQueryEntry 11 } + +cseFlowQueryResultTotalOctets OBJECT-TYPE + SYNTAX CiscoGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The aggregate number of total octets switched by the system on + all the flows matching this query. This is a snapshot value + and is valid only when the corresponding instance of + cseFlowQueryResultingRows is greater than or equal to 0." + ::= { cseFlowQueryEntry 12 } + +cseFlowQueryResultAvgDuration OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average duration of the flows matching this query. This is + a snapshot value and is valid only when the corresponding + instance of cseFlowQueryResultingRows is greater + than or equal to 0." + ::= { cseFlowQueryEntry 13 } + +cseFlowQueryResultAvgIdle OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The elapsed time since the flows were last used, averaged over + all flows matching this query. This is a snapshot value + and is valid only when the corresponding instance of + cseFlowQueryResultingRows is greater than or equal to 0." + ::= { cseFlowQueryEntry 14 } + +cseFlowQueryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status object used to manage rows in this table. + When set to active(1), the query is initiated. + Once initiated, the value may + not be modified until the value of cseFlowQueryResultingRows is + greater than or equal to 0. However, this object can be set to + active(1) only after all the appropriate objects for this query + as defined by the value set in the cseFlowQueryMask object, + have also been set. + Once a row becomes active, values within the row cannot + be modified, except by deleting and re-creating it." + ::= { cseFlowQueryEntry 15 } + +cseFlowQueryCreateTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time when this query was created." + ::= { cseFlowQueryEntry 16 } + +cseFlowQueryTotalFlows OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of L3 flows matching the query criterion." + ::= { cseFlowQueryEntry 17 } + +cseFlowQuerySkipNFlows OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of searched flows to be skipped before storing + any L3 flows in cseFlowDataTable. + + This object can be used along with cseFloQueryTotalFlows + object to skip previously found flows by setting the variable + equal to the number of the associated rows in + cseFlowDataTable, and only query the remaining flows + in the table. + + Note that due to the dynamical nature of the L3 flows, the + queried flows may be missed or repeated by setting this object. + + The value of this object cannot be modified + when the corresponding instance of cseFlowQueryStatus + is 'active'." + DEFVAL { 0 } + ::= { cseFlowQueryEntry 18 } + + +-- The Unicast Flow query results data table + +cseFlowDataTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing L3 flow information corresponding to all + the completed queries setup in the cseFlowQueryTable, that were + initiated on the switch engine(s)." + ::= { cseFlow 9 } + +cseFlowDataEntry OBJECT-TYPE + SYNTAX CseFlowDataEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of the cseFlowDataTable used to return + information about one of the L3 flows which matched the + search criteria set by the cseFlowQueryMask object in the + corresponding instance of the cseFlowQueryTable." + INDEX { + entPhysicalIndex, + cseFlowQueryIndex, + cseFlowDataIndex + } + ::= { cseFlowDataTable 1 } + +CseFlowDataEntry ::= SEQUENCE { + cseFlowDataIndex Unsigned32, + cseFlowDataSrcMac MacAddress, + cseFlowDataDstMac MacAddress, + cseFlowDataStaticFlow TruthValue, + cseFlowDataEncapType INTEGER, + cseFlowDataSource FlowAddressComponent, + cseFlowDataDestination FlowAddressComponent, + cseFlowDataDestVlan VlanIndex, + cseFlowDataIpQOS Integer32, + cseFlowDataIpQOSPolicy Integer32, + cseFlowDataWhenCreated TimeStamp, + cseFlowDataLastUsed TimeStamp, + cseFlowDataPkts Gauge32, + cseFlowDataOctets CiscoGauge64 +} + +cseFlowDataIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A number to uniquely identify a result entry that matches a + particular query for a specific switching engine." + ::= { cseFlowDataEntry 1 } + +cseFlowDataSrcMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Source Mac Address of the router's outgoing interface." + ::= { cseFlowDataEntry 2 } + +cseFlowDataDstMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination Mac Address used to forward the packets in + this flow." + ::= { cseFlowDataEntry 3 } + +cseFlowDataStaticFlow OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether this flow was software-installed." + ::= { cseFlowDataEntry 4 } + +cseFlowDataEncapType OBJECT-TYPE + SYNTAX INTEGER { + ipArpa(1), + ipxEthernet(2), + ipx802raw(3), + ipx802sap(4), + ipx802snap(5), + other(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Protocol encapsulation type used to forward packets in this flow + to their destination." + ::= { cseFlowDataEntry 5 } + +cseFlowDataSource OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source network address and the port (if appropriate) of this + flow." + ::= { cseFlowDataEntry 6 } + +cseFlowDataDestination OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination network address and port (if appropriate) of this + flow." + ::= { cseFlowDataEntry 7 } + +cseFlowDataDestVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The vlan number on which packets belonging to this flow are + forwarded." + ::= { cseFlowDataEntry 8 } + +cseFlowDataIpQOS OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Level of Quality of service for this IP flow. + If it is not an IP flow, this object will not be instantiated." + ::= { cseFlowDataEntry 9 } + +cseFlowDataIpQOSPolicy OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Level of the Quality of service policy for this IP flow. + If it is not an IP flow, this object will not be instantiated." + ::= { cseFlowDataEntry 10 } + +cseFlowDataWhenCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time when this flow was created in the switching engine." + ::= { cseFlowDataEntry 11 } + +cseFlowDataLastUsed OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time since this flow was last used to forward a packet by the + switching engine." + ::= { cseFlowDataEntry 12 } + +cseFlowDataPkts OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A snapshot value of the number of packets forwarded on this flow + at the time of corresponding query." + ::= { cseFlowDataEntry 13 } + +cseFlowDataOctets OBJECT-TYPE + SYNTAX CiscoGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A snapshot value of octets forwarded on this flow at the time of + corresponding query." + ::= { cseFlowDataEntry 14 } + + + +cseFlowSwitchControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowSwitchControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table used to control the L3 flow switching operation, per + protocol type." + ::= { cseFlow 10 } + +cseFlowSwitchControlEntry OBJECT-TYPE + SYNTAX CseFlowSwitchControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row for the configuration of Flow switching + feature for an L3 protocol type." + INDEX { cseFlowSwitchProtocol } + ::= { cseFlowSwitchControlTable 1 } + +CseFlowSwitchControlEntry ::= SEQUENCE { + cseFlowSwitchProtocol CiscoNetworkProtocol, + cseFlowSwitchStatus ControlStatus +} + +cseFlowSwitchProtocol OBJECT-TYPE + SYNTAX CiscoNetworkProtocol + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Protocol type for which this row instance. Only ip(1) and ipx(14) + values are currently supported." + ::= { cseFlowSwitchControlEntry 1 } + +cseFlowSwitchStatus OBJECT-TYPE + SYNTAX ControlStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current status of the global flow switching capability for + the specified L3 protocol type." + ::= { cseFlowSwitchControlEntry 2 } + + + +-- Multicast Flow Query table + +cseFlowMcastMaxQueries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum number of query entries allowed to be outstanding + at any time, in the cseFlowMcastQueryTable. The typical value + for this object is 5." + ::= { cseFlow 11 } + +cseFlowMcastQueryTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowMcastQueryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A control table used to query the switching engine by + specifying retrieval criteria for IP multicast L3 flows. + Each row instance in the table represents a query with + its parameters. The resulting data for each instance of + a query in this table is returned in the + cseFlowMcastResultTable. + The maximum number of entries (rows) in this table cannot + exceed the value of cseFlowMcastMaxQueries object. + + Unlike unicast switched layer 3 flows, an IP multicast + switched flow is created and installed by software, and + is uniquely identified by flow's source IP address, and + multicast group IP address. It is stored with input Vlan + ID in the cache entry, so that the packets in the flow + will not be replicated and forwarded to the receivers on the + same (input) Vlan. + Another difference is that all IP multicast hardware + switched flows belonging to the same (source, group) are + stored only on one switch engine on a Cisco L3 switch with + distributed switch engines, whereas unicast flows identified + by certain criterion may resident on multiple switch engines + in the system." + ::= { cseFlow 12 } + +cseFlowMcastQueryEntry OBJECT-TYPE + SYNTAX CseFlowMcastQueryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of the cesMcastFlowQueryTable used to + setup retrieval criteria to search for IP multicast L3 + flows on all switching engine entities in the device. + The actual search is started by setting the value of + cseFlowMcastQueryStatus to 'active'. Once a row becomes + active, values within the row cannot be modified, without + setting the associated RowStatus object to 'notInService' + first, or deleting and re-creating the row." + INDEX { cseFlowMcastQueryIndex } + ::= { cseFlowMcastQueryTable 1 } + +CseFlowMcastQueryEntry ::= SEQUENCE { + cseFlowMcastQueryIndex Unsigned32, + cseFlowMcastQueryMask BITS, + cseFlowMcastQuerySrc IpAddress, + cseFlowMcastQueryGrp McastGroupIp, + cseFlowMcastQuerySrcVlan VlanIndex, + cseFlowMcastQueryRtrIndex IpAddress, + cseFlowMcastQuerySkipNFlows Integer32, + cseFlowMcastQueryOwner OwnerString, + cseFlowMcastQueryTotalFlows Integer32, + cseFlowMcastQueryRows Integer32, + cseFlowMcastQueryStatus RowStatus, + cseFlowMcastQueryCreateTime TimeStamp, + cseFlowMcastQueryMvrf MplsVpnId, + cseFlowMcastQueryAddrType InetAddressType, + cseFlowMcastQuerySource InetAddress, + cseFlowMcastQueryGroup InetAddress +} + +cseFlowMcastQueryIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer in the range of 1 to + cseFlowMcastMaxQueries to identify this control query." + ::= { cseFlowMcastQueryEntry 1 } + +cseFlowMcastQueryMask OBJECT-TYPE + SYNTAX BITS { + source(0), + group(1), + vlan(2), + router(3), + mvrf(4), + sourceip(5), + groupip(6) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to set up the query criterion for + the multicast flows of interest. If any one of the + defined BITs is set, then the value of the corresponding + object in the same row instance will be used for the search. + + Specifically, if the 'source(0)' BIT is set, then the + cseFlowMcastQuerySrc object will be included in the + search criterion. + + If the group(1) BIT is set, then the + cseFlowMcastQueryGrp object will be included in the + search criterion. + + If the vlan(2) BIT is set, then the + cseFlowMcastQuerySrcVlan object will be included in the + search criterion. + + If the router(3) BIT is set, then the + cseFlowMcastQueryRtrIndex object will be included in the + search criterion. + + If the mvrf(4) BIT is set, then the + cseFlowMcastQueryMvrf object will be included in the + search criterion; + + If the sourceip(5) BIT is set, then the + cseFlowMcastQueryAddrType and cseFlowMcastQuerySource + objects will be included in the search criterion. + + If the groupip(6) BIT is set, then the + cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup + objects will be included in the search criterion. + + If the source(0) or group(1) BIT is set, then the + sourceip(5) or groupip(6) cannot be set, and vice-versa. + + If any of the BITs in this variable is cleared, the + corresponding parameter object in the same row is + treated as a wildcard. When the row is instantiated, + the BITs in the variable will be cleared, and none of + query parameter objects in this row will be instantiated. + This will be considered as a wildcard search for flows + on the default Multicast Virtual Private Network (MVPN) + routing/forwarding (MVRF) instance. + i.e. it will return all rows corresponding + to all established multicast flow entries in the default + MVRF, in cseFlowMcastResultTable. The address type of this + wildcard search will be specified be cseFlowMcastQueryAddrType. + It is SNMP managers' responsibility to set certain + bits on in this object instance, if necessary, + and the corresponding flow parameter variables to the + appropriate values in order to setup the desired + query criteria. + The value of this object can not be altered when the + corresponding instance of cseFlowMcastQueryStatus is 'active'." + DEFVAL { { } } + ::= { cseFlowMcastQueryEntry 2 } + +cseFlowMcastQuerySrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The source address of the IP multicast layer 3 flows. + This object should be instantiated and assigned a + proper IP address whenever the 'source' bit of + cseFlowMcastQueryMask object in the same row is on. + If the 'source' bit is set, and an appropriate IP address + is assigned to this object, then only flows with the + specified source address will be containing in the + result table. + If the 'source' bit in the associated cseFlowMcastQueryMask + is cleared, this object is ignored during the query, and all + flows will be considered regardless of their source IP address. + + This object is deprecated and replaced by + cseFlowMcastQueryAddrType and cseFlowMcastQuerySource." + ::= { cseFlowMcastQueryEntry 3 } + +cseFlowMcastQueryGrp OBJECT-TYPE + SYNTAX McastGroupIp + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The IP multicast group address of the queried flows. + This object should be instantiated and set whenever + the 'group' bit of the associated cseFlowMcastQueryMask object + is on. + If the 'group' bit is set, and a multicast group address is + assigned to the object, only flows with the specified group + address will be contained in the result table. + If the 'group' bit in the associated cseFlowMcastQueryMask + is cleared, this object is ignored during the query, and all + flows will be considered regardless of their group address. + + This object is deprecated and replaced by + cseFlowMcastQueryAddrType and cseFlowMcastQueryGroup." + ::= { cseFlowMcastQueryEntry 4 } + +cseFlowMcastQuerySrcVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source Vlan ID of the IP multicast layer 3 flows. + This object should be instantiated and set whenever + the 'vlan' bit of the associated cseFlowMcastQueryMask object + is on. + If the 'vlan' bit is set, and a Vlan ID is assigned to this + object, only flows belonging to that vlan will be contained + in the result table. + If the 'vlan' bit in the associated cseFlowMcastQueryMask object + is cleared, this object is ignored during the query, and all + flows will be considered regardless of their vlan IDs." + ::= { cseFlowMcastQueryEntry 5 } + +cseFlowMcastQueryRtrIndex OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Index of the router for which the multicast flows are + available, that is the flows would be replicated + and routed by the specified + router, should the flows did not get switched. + This object should be instantiated and set whenever the 'router' + bit of the asociated cseFlowMcastQueryMask object is on. + If the 'router' bit is set, and a router's IP address + is assigned to this object, then only flows associated with + that router will be contained in the result table. + If the 'router' bit in the cseFlowMcastQueryMask object + is cleared, this object is ignored during the query, and all + flows will be considered regardless of the routers + being switched." + ::= { cseFlowMcastQueryEntry 6 } + +cseFlowMcastQuerySkipNFlows OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of searched flows to be skipped before storing + any multicast flows in cseFlowMcastResultTable. + This object can be used along with cseFlowMcastQueryTotalFlows + object to skip previously found flows by setting the variable + equal to the number of the associated rows in + cseFlowMcastResultTable, and only query the remaining flows + in the table. + Note that due to the dynamical nature of the L3 flows, the + queried flows may be missed or repeated by setting this object." + DEFVAL { 0 } + ::= { cseFlowMcastQueryEntry 7 } + +cseFlowMcastQueryOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The manager entity that configured this entry and is therefore + using the resources assigned to it. It is used to model an + administratively assigned name of the owner of a resource. + It is recommended that this object have one or more the following + information: IP address, management station name, network + manager's name, location, or phone number." + ::= { cseFlowMcastQueryEntry 8 } + +cseFlowMcastQueryTotalFlows OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of flows matching the query criterion." + ::= { cseFlowMcastQueryEntry 9 } + +cseFlowMcastQueryRows OBJECT-TYPE + SYNTAX Integer32 (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicating the status of the query by following values: + -1 - Either the query has not been started or the + agent is still processing this query instance. + It is the default value when the row is instantiated. + + 0..2147483647 - The search has ended and this is the + number of rows in the cseFlowMcastResultTable, + resulting from this query." + ::= { cseFlowMcastQueryEntry 10 } + +cseFlowMcastQueryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status object used to manage rows in this table. + When set to 'active', the query of flows is initiated. + This object can be set to active only after all the + appropriate objects for this query as defined by the + bits in the cseFlowMcastQueryMask object, have also been + instantiated. The completion of the query is indicated + by the value of cseFlowMcastQueryRows as soon as it + becomes greater than or equal to 0. + Once a row becomes active, values within the row cannot be + modified without setting it to 'notInService' first, or just + deleting and re-creating it. + To abort a lengthy on-going query, setting this object to + 'notInService', or 'destroy' will terminate a search + if one is in progress, and cause the associated rows in + cseFlowMcastResultTable, if any, to be deleted." + ::= { cseFlowMcastQueryEntry 11 } + +cseFlowMcastQueryCreateTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time when this query was last set to active." + ::= { cseFlowMcastQueryEntry 12 } + +cseFlowMcastQueryMvrf OBJECT-TYPE + SYNTAX MplsVpnId + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The human-readable name of the Multicast + Virtual Private Network (MVPN) routing/forwarding + instance (MVRF). When the 'mvrf' bit of + cseFlowMcastQueryMask object in the same row is on, + an appropriate value should be specified and only flows + with the specified MVRF name will be contained in the + result table. If the 'mvrf' bit in the associated + cseFlowMcastQueryMask is cleared, this object is ignored + during the query, and all the flows corresponding to the + default MVRF will be considered." + ::= { cseFlowMcastQueryEntry 13 } + +cseFlowMcastQueryAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Internet address type for this multicast search + query." + DEFVAL { ipv4 } + ::= { cseFlowMcastQueryEntry 14 } + +cseFlowMcastQuerySource OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source Internet address of the IP multicast layer 3 + flows. When the 'sourceip' bit of cseFlowMcastQueryMask + cseFlowMcastQueryMask object in the same row is on, + an appropriate value should be specified and only flows + with the specified source address will be contained in the + result table. If the 'sourceip' bit in the associated + cseFlowMcastQueryMask is cleared, this object is ignored + during the query, and all flows will be considered regardless + of their source address. + + The type of this address is determined by the value of the + cseFlowMcastQueryAddrType object. + + The default value of this object is all zeros." + DEFVAL { '00000000'H } + ::= { cseFlowMcastQueryEntry 15 } + +cseFlowMcastQueryGroup OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The multicast group Internet address of the queried flows. + When the 'mvrf' bit of cseFlowMcastQueryMask object + in the same row is on, an appropriate value should be + specified and only flows with the specified group address + will be contained in the result table. If the 'groupip' bit + in the associated cseFlowMcastQueryMask is cleared, this + object is ignored during the query, and all flows will + be considered regardless of their group address. + + The type of this address is determined by the value of the + cseFlowMcastQueryAddrType object. + + The default value of this object is all zeros." + DEFVAL { '00000000'H } + ::= { cseFlowMcastQueryEntry 16 } + + +-- The multicast flow query result data table + +cseFlowMcastResultTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowMcastResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing current IP multicast flow information + corresponding to all the completed queries set up in + the cseFlowMcastQueryTable, that were initiated on the switch + engine(s). The query result will not become available until + the current search completes." + ::= { cseFlow 13 } + +cseFlowMcastResultEntry OBJECT-TYPE + SYNTAX CseFlowMcastResultEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of cseFlowMcastResultTable, containing + information about an IP multicast layer 3 flow that matchs + the search criteria set in the corresponding row of + cseFlowMcastQueryTable. This row instance is indexed by + the query index (cseFlowMcastQueryIndex), the switch engine + entity (entPhysicalIndex), and data entry index + (cseFlowMcastResultIndex). The value of entPhysicalIndex + object is assigned by Entity-MIB, and uniquely identifies + a switching engine on which the IP multicast flow is stored." + INDEX { + cseFlowMcastQueryIndex, + entPhysicalIndex, + cseFlowMcastResultIndex + } + ::= { cseFlowMcastResultTable 1 } + +CseFlowMcastResultEntry ::= SEQUENCE { + cseFlowMcastResultIndex Integer32, + cseFlowMcastResultGrp McastGroupIp, + cseFlowMcastResultSrc IpAddress, + cseFlowMcastResultSrcVlan VlanIndex, + cseFlowMcastResultRtrIp IpAddress, + cseFlowMcastResultRtrMac MacAddress, + cseFlowMcastResultCreatedTS TimeStamp, + cseFlowMcastResultLastUsedTS TimeStamp, + cseFlowMcastResultPkts Counter64, + cseFlowMcastResultOctets Counter64, + cseFlowMcastResultDstVlans OCTET STRING, + cseFlowMcastResultDstVlans2k OCTET STRING, + cseFlowMcastResultDstVlans3k OCTET STRING, + cseFlowMcastResultDstVlans4k OCTET STRING, + cseFlowMcastResultMvrf MplsVpnId, + cseFlowMcastResultAddrType InetAddressType, + cseFlowMcastResultGroup InetAddress, + cseFlowMcastResultSource InetAddress, + cseFlowMcastResultFlowType INTEGER, + cseFlowMcastResultHFlag1k2k OCTET STRING, + cseFlowMcastResultHFlag3k4k OCTET STRING +} + +cseFlowMcastResultIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A positive integer which uniquely identify a result entry + on a specific switching engine matching a particular query." + ::= { cseFlowMcastResultEntry 1 } + +cseFlowMcastResultGrp OBJECT-TYPE + SYNTAX McastGroupIp + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The multicast group IP address of the multicast layer 3 flow. + + This object is deprecated and replaced by + cseFlowMcastResultAddrType and cseFlowMcastResultGroup." + ::= { cseFlowMcastResultEntry 2 } + +cseFlowMcastResultSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The source address of the multicast layer 3 flow. + + This object is deprecated and replaced by + cseFlowMcastResultAddrType and cseFlowMcastResultSource." + ::= { cseFlowMcastResultEntry 3 } + +cseFlowMcastResultSrcVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source Vlan ID of the IP multicast layer 3 flow." + ::= { cseFlowMcastResultEntry 4 } + +cseFlowMcastResultRtrIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface IP address of the router this multicast flow + is switching for. Since IP multicast flows can only be + established for a router's trunk ports, it is the primary + IP address of the router's trunk link that connects to the + switch." + ::= { cseFlowMcastResultEntry 5 } + +cseFlowMcastResultRtrMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The default MAC address of the router the multicast flow is + switching for. Different multicast flows switching different + ports of the same router will have the identical value of this + object." + ::= { cseFlowMcastResultEntry 6 } + +cseFlowMcastResultCreatedTS OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time when the IP multicast flow was created." + ::= { cseFlowMcastResultEntry 7 } + +cseFlowMcastResultLastUsedTS OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time when this IP multicast flow was last used." + ::= { cseFlowMcastResultEntry 8 } + +cseFlowMcastResultPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of multicast traffic packets forwarded + for this flow (replicated packets are not counted)." + ::= { cseFlowMcastResultEntry 9 } + +cseFlowMcastResultOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of multicast traffic octets forwarded + for this flow (replicated packets are not counted)." + ::= { cseFlowMcastResultEntry 10 } + +cseFlowMcastResultDstVlans OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per VLAN. + Each octet within the value of this object specifies a + set of eight VLANs, e.g. the first octet corresponding to + VLANs with VlanIndex values of 0 through 7, the second + octet to VLANs 8 through 15, etc. Within each octet, + the most significant bit represents the lowest numbered + VLAN, and the least significant bit represents the highest + numbered VLAN, thus each vlan is represented by a single bit + within the octet. The bits in this object will be set + to '1' if the corresponding Vlans are in the out-going + interface (vlan) list of the IP multicast flow described + by this row instance." + ::= { cseFlowMcastResultEntry 11 } + +cseFlowMcastResultDstVlans2k OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per VLAN, + with VlanIndex values of 1024 through 2047,with + each octet within the value of this object specifies a + set of eight VLANs, e.g. the first octet corresponding to + VLANs with VlanIndex values of 1024 through 1031, the second + octet to VLANs 1032 through 1039 etc. Within each octet, + the most significant bit represents the lowest numbered + VLAN, and the least significant bit represents the highest + numbered VLAN, thus each vlan is represented by a single bit + within the octet. The bits in this object will be set + to '1' if the corresponding Vlans are in the out-going + interface (vlan) list of the IP multicast flow described + by this row instance." + ::= { cseFlowMcastResultEntry 12 } + +cseFlowMcastResultDstVlans3k OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per VLAN. + With VlanIndex values of 2048 through 3071 with + each octet within the value of this object specifies a + set of eight VLANs, e.g. the first octet corresponding to + VLANs with VlanIndex values of 2048 through 2055, the second + octet to VLANs 2056 through 2063 etc. Within each octet, + the most significant bit represents the lowest numbered + VLAN, and the least significant bit represents the highest + numbered VLAN, thus each vlan is represented by a single bit + within the octet. The bits in this object will be set + to '1' if the corresponding Vlans are in the out-going + interface (vlan) list of the IP multicast flow described + by this row instance." + ::= { cseFlowMcastResultEntry 13 } + +cseFlowMcastResultDstVlans4k OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per VLAN. + With VlanIndex values of 3072 through 4095, with + each octet within the value of this object specifies a + set of eight VLANs, e.g. the first octet corresponding to + VLANs with VlanIndex values of 3072 through 3079 the second + octet to VLANs 3080 through 3087 etc. Within each octet, + the most significant bit represents the lowest numbered + VLAN, and the least significant bit represents the highest + numbered VLAN, thus each vlan is represented by a single bit + within the octet. The bits in this object will be set + to '1' if the corresponding Vlans are in the out-going + interface (vlan) list of the IP multicast flow described + by this row instance." + ::= { cseFlowMcastResultEntry 14 } + +cseFlowMcastResultMvrf OBJECT-TYPE + SYNTAX MplsVpnId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MVRF to which this flow belongs to." + ::= { cseFlowMcastResultEntry 15 } + +cseFlowMcastResultAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Internet address type of cseFlowMcastResultGroup + and cseFlowMcastResultSource." + ::= { cseFlowMcastResultEntry 16 } + +cseFlowMcastResultGroup OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The multicast group IP address of the multicast layer + 3 flow." + ::= { cseFlowMcastResultEntry 17 } + +cseFlowMcastResultSource OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source address of the multicast layer 3 flow." + ::= { cseFlowMcastResultEntry 18 } + +cseFlowMcastResultFlowType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + rpfMfd(2), + partialSC(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the type of multicast layer 3 flow. + + other - Multicast flow type is none of the followoing. + + rpfMfd - This flow is a RPF MFD flow. + + partial - This flow is a partial shortcut flow." + ::= { cseFlowMcastResultEntry 19 } + +cseFlowMcastResultHFlag1k2k OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..256)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per out-going + interface (VLAN) with VlanIndex values of 0 through 2047. + Each octet within the value of this object specifies + a set of eight VLANs, e.g. the first octet + corresponding to VLANs with VlanIndex values of + 0 through 7, the second octet to VLANs 8 through 15, + etc. Within each octet, the most significant bit + represents the lowest numbered VLAN, and the least + significant bit represents the highest numbered VLAN, + thus each vlan is represented by a single bit within the + octet. + + The bits in this object will be set to '1' if the + multicast layer 3 flow described by this row instance + is hardware switched on the corresponding VLAN. + If the length of this string is less than 256 octets, + any 'missing' octets are assumed to contain the value + of zero." + ::= { cseFlowMcastResultEntry 20 } + +cseFlowMcastResultHFlag3k4k OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..256)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A string of octets containing one bit per out-going + interface (VLAN) with VlanIndex values of 2048 through + 4095. Each octet within the value of this object + specifies a set of eight VLANs, e.g. the first octet + corresponding to VLANs with VlanIndex values of 2048 + through 2055, the second octet to VLANs 2056 through + 2063 etc. Within each octet, the most significant + bit represents the lowest numbered VLAN, and the least + significant bit represents the highest numbered VLAN, + thus each vlan is represented by a single bit within + the octet. + + The bits in this object will be set to '1' if the + multicast layer 3 flow described by this row instance + is hardware switched on the corresponding VLAN. + If the length of this string is less than 256 octets, + any 'missing' octets are assumed to contain the value + of zero." + ::= { cseFlowMcastResultEntry 21 } + + + +-- Multicast MLS-SE global configuration + +cseFlowMcastSwitchStatus OBJECT-TYPE + SYNTAX ControlStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current status of the global IP multicast flow switching + capability. When enabled, the switch engine will be able to + install multicast flow entries in its L3 forwarding table, + and perform hardware assisted switching for the flows." + ::= { cseFlow 14 } + +-- Now that our hardware can L3 switch IPX traffic + +cseFlowIPXEstablishedAgingTime OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative aging time for established IPX flows. The + default value for this object is implementation specific. + The corresponding operational object is + cseFlowOperIPXAgingTime." + ::= { cseFlow 15 } + +cseStaticIpxExtRouterTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseStaticIpxExtRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of external routers which are enabled for + Layer 3 IPX switching by the switching engine. + This table may contain routers + that have not yet been discovered by the device." + ::= { cseFlow 16 } + +cseStaticIpxExtRouterEntry OBJECT-TYPE + SYNTAX CseStaticIpxExtRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseStaticIpxExtRouterTable for + enabling an external router to be installed in the + switch's router table. The entry is created and deleted + by using cseStaticIpxRouterStatus." + INDEX { cseRouterIndex } + ::= { cseStaticIpxExtRouterTable 1 } + +CseStaticIpxExtRouterEntry ::= SEQUENCE { + cseStaticIpxRouterName DisplayString, + cseStaticIpxRouterOwner OwnerString, + cseStaticIpxRouterStatus RowStatus +} + +cseStaticIpxRouterName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DNS name (if available) of the external router." + ::= { cseStaticIpxExtRouterEntry 1 } + +cseStaticIpxRouterOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "String indicating the owner who created the static entry." + ::= { cseStaticIpxExtRouterEntry 2 } + +cseStaticIpxRouterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to manage creation and deletion of rows in this table. + Once a row becomes active, values within that row cannot be + modified except by deleting and creating the row." + ::= { cseStaticIpxExtRouterEntry 3 } + + + +cseFlowOperEstablishedAgingTime OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational aging time for IP established flows." + ::= { cseFlow 17 } + +cseFlowOperFastAgingTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational fast aging time for the established flow + entries, that have less number of packets than the value set + in the cseFlowOperFastAgePktThreshold,switched within this + time." + ::= { cseFlow 18 } + +cseFlowOperFastAgePktThreshold OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational packet threshold for the + cseFlowOperFastAgingTime." + ::= { cseFlow 19 } + +cseFlowOperIPXAgingTime OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational aging time for established IPX flows." + ::= { cseFlow 20 } +-- The bridged flow statistics control table + +cseBridgedFlowStatsCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseBridgedFlowStatsCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table controls the reporting of intra-vlan statistics + for bridged flow per vlan. When a vlan is created in + a device supporting this table, a corresponding entry + of this table will be added." + ::= { cseFlow 21 } + +cseBridgedFlowStatsCtrlEntry OBJECT-TYPE + SYNTAX CseBridgedFlowStatsCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable + or disable the reporting of intra-vlan statistics for + bridged flow per vlan." + INDEX { cseBridgedFlowVlan } + ::= { cseBridgedFlowStatsCtrlTable 1 } + +CseBridgedFlowStatsCtrlEntry ::= SEQUENCE { + cseBridgedFlowVlan VlanIndex, + cseFlowBridgedFlowStatsEnable TruthValue +} + +cseBridgedFlowVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the Vlan number on which the reporting of + intra-vlan bridged flow statistics is configured." + ::= { cseBridgedFlowStatsCtrlEntry 1 } + +cseFlowBridgedFlowStatsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether intra-vlan bridged flow statistics is + enabled. If this object is set to 'true', intra-vlan + bridged flow statistics is reported in cseFlowDataTable + when a corresponding query is set up in cseFlowQueryTable. + If this object is set to 'false', intra-vlan bridged flow + statistics is not reported. The default is false." + DEFVAL { false } + ::= { cseBridgedFlowStatsCtrlEntry 2 } + + + +cseFlowIPFlowMask OBJECT-TYPE + SYNTAX INTEGER { + dstOnly(1), + srcDst(2), + fullFlow(3), + srcOnly(4), + intDstSrc(5), + intFull(6), + null(7), + intDstOnly(8), + intSrcOnly(9) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the flow mask for IP flows. + + If dstOnly(1) is used, it enables flows based on Layer 3 + destination addresses only. + + If srcDst(2) is used, it enables flows based on both Layer 3 + source and destination addresses only. + + If fullFlow(3) is used, it enables flows based on Layer 4 port + numbers in addition to source and destination addresses. + + If srcOnly(4) is used, it enables flows based on Layer 3 + source addresses only. + + If intDstSrc(5) is used, it enables flows based on source + interface in addition to source and destination addresses. + + If intFull(6) is used, it enables flows based on source + interface in addition to Layer 4 port numbers, source and + destination addresses. + + If null(7) is used, no flow will be enabled. + + If intDstOnly(8) is used, it enables flows based on source + interface in addition to the destination addresses. + + If intSrcOnly(9) is used, it enables flows based on source + interface in addition to the source addresses." + ::= { cseFlow 22 } + +cseFlowIPXFlowMask OBJECT-TYPE + SYNTAX INTEGER { + dstOnly(1), + srcDst(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the flow mask for IPX flows. + + If dstOnly(1) is used, it enables flows based on Layer 3 + destination addresses only. + + If srcDst(2) is used, it enables flows based on both Layer 3 + source and destination addresses only." + ::= { cseFlow 23 } + +cseFlowLongAgingTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative long aging time for the established + flow entries. Setting to value of 0 turns off long aging." + ::= { cseFlow 24 } +-- The protocol exclude table + +cseFlowExcludeTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowExcludeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table controls the flow creation based on protocol + and port number. If a packet matches the protocol and + port number specified in this table entries, a flow + entry will not be established." + ::= { cseFlow 25 } + +cseFlowExcludeEntry OBJECT-TYPE + SYNTAX CseFlowExcludeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance contains the configuration to enable or + disable the establishment of flow entry for matching + traffic." + INDEX { cseFlowExcludePort } + ::= { cseFlowExcludeTable 1 } + +CseFlowExcludeEntry ::= SEQUENCE { + cseFlowExcludePort CiscoPort, + cseFlowExcludeProtocol INTEGER, + cseFlowExcludeStatus RowStatus +} + +cseFlowExcludePort OBJECT-TYPE + SYNTAX CiscoPort + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the TCP or UDP port number that matching + traffic will be excluded from flow establishment. + The value of 0 is not allowed." + ::= { cseFlowExcludeEntry 1 } + +cseFlowExcludeProtocol OBJECT-TYPE + SYNTAX INTEGER { + udp(1), + tcp(2), + both(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the protocol that matching traffic will be + excluded from flow establishment." + ::= { cseFlowExcludeEntry 2 } + +cseFlowExcludeStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. New rows are created + using 'createAndGo' and deleted using 'destroy'. + + Once 'active' this object may be set to only 'destroy'. + cseFlowExcludeProtocol may be modified at any time (even + while the row is active)." + ::= { cseFlowExcludeEntry 3 } + + +-- The flow statistics table + +cseFlowStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseFlowStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing flow statistics information on each switching + engine." + ::= { cseFlow 26 } + +cseFlowStatsEntry OBJECT-TYPE + SYNTAX CseFlowStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of cseFlowStatsTable, containing flow + statistics maintained by a switching engine entity + (identified by entPhysicalIndex). Each switching engine + managed by this MIB module has an entry in this table." + INDEX { entPhysicalIndex } + ::= { cseFlowStatsTable 1 } + +CseFlowStatsEntry ::= SEQUENCE { + cseFlowTotalFlows Gauge32, + cseFlowTotalIpv4Flows Gauge32 +} + +cseFlowTotalFlows OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of flow entries installed in + this switching engine." + ::= { cseFlowStatsEntry 1 } + +cseFlowTotalIpv4Flows OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the total number of IPv4 flow entries in + this switching engine." + ::= { cseFlowStatsEntry 2 } + + + +-- Optional NetFlow Lan Switching group + +cseNetflowLSExportStatus OBJECT-TYPE + SYNTAX ControlStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Status of the Netflow LAN Switching data export feature." + ::= { cseNetflowLS 1 } + +cseNetflowLSExportHost OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Network(IP) address in dotted decimal format or the DNS hostname + of the host to which Netflow LAN switching statistics are + exported. + + This object is deprecated and replaced by cndeCollectorAddress + in CISCO-NDE-MIB." + ::= { cseNetflowLS 2 } + +cseNetflowLSExportTransportNumber OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The transport(UDP) port number to be used for the Netflow LAN + switching statistics being exported. + + This object is deprecated and replaced by cndeCollectorPort + in CISCO-NDE-MIB." + ::= { cseNetflowLS 3 } + +cseNetflowLSExportDataSource OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The source network address used as a filter for selecting + the flows to which the netflow LAN switching data export + feature is applied." + ::= { cseNetflowLS 4 } + +cseNetflowLSExportDataSourceMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mask to be applied to the corresponding instance of + cseNetflowExportDataSource." + ::= { cseNetflowLS 5 } + +cseNetflowLSExportDataDest OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The destination network address used as a filter for + selecting the flows to which the netflow LAN switching + data export feature is applied." + ::= { cseNetflowLS 6 } + +cseNetflowLSExportDataDestMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mask to be applied to its corresponding instance + of cseNetflowExportDataDest." + ::= { cseNetflowLS 7 } + +cseNetflowLSExportDataProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The protocol used as a filter for selecting the + flows to which the netflow LAN switching data export feature + is applied." + REFERENCE "The protocol value is defined in the RFC 1700." + ::= { cseNetflowLS 8 } + +cseNetflowLSExportDataFilterSelection OBJECT-TYPE + SYNTAX INTEGER { + included(1), + excluded(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The filter set can be chosen either included(1) or + excluded(2) mutually exclusive. If this object is set to + included(1) - exports the flows that match + cseNetflowLSExportDataSource, + cseNetflowLSExportDataSourceMask, + cseNetflowLSExportDataDest, + cseNetflowLSExportDataDestMask and + cseNetflowLSExportDataProtocol. + + excluded(2) - exports the flows that don't match + cseNetflowLSExportDataSource, + cseNetflowLSExportDataSourceMask, + cseNetflowLSExportDataDest, + cseNetflowLSExportDataDestMask and + cseNetflowLSExportDataProtocol." + ::= { cseNetflowLS 9 } + +cseNetflowLSExportNDEVersionNumber OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The netflow data export version number which is + supported by the device. + The typical value of this object can be 1, 7 or 8." + ::= { cseNetflowLS 10 } + +cseNetflowLSFilterSupport OBJECT-TYPE + SYNTAX INTEGER { + single(1), + multiple(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether this device supports single filter or + multiple filters. + + single - use objects in cseNDESingleFilterGroupRev1 to + configure NDE filtering paramaters. + + multiple - use objects in cseNDEMultipleFiltersGroup to + configure NDE filtering paramaters." + ::= { cseNetflowLS 11 } + +cseNetflowLSFilterTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseNetflowLSFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Table containing Netflow Data Export filtering + configuration." + ::= { cseNetflowLS 12 } + +cseNetflowLSFilterEntry OBJECT-TYPE + SYNTAX CseNetflowLSFilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptutal row in the cseNetflowLSFilterTable, + representing a NDE filter configuration." + INDEX { cseNetflowLSFilterIndex } + ::= { cseNetflowLSFilterTable 1 } + +CseNetflowLSFilterEntry ::= SEQUENCE { + cseNetflowLSFilterIndex Unsigned32, + cseNetflowLSFilterDataSource FlowAddressComponent, + cseNetflowLSFilterDataSourceMask FlowAddressComponent, + cseNetflowLSFilterDataDest FlowAddressComponent, + cseNetflowLSFilterDataDestMask FlowAddressComponent, + cseNetflowLSFilterDataProtocol Integer32, + cseNetflowLSFilterSelection INTEGER, + cseNetflowLSFilterStatus RowStatus +} + +cseNetflowLSFilterIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer which uniquely identifies the filter" + ::= { cseNetflowLSFilterEntry 1 } + +cseNetflowLSFilterDataSource OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source network address used as a filter for selecting + the flows to which the netflow LAN switching data export + feature is applied. If cseNetflowLSNDEFilterDataSource + contains all zeros, then the + cseNetflowLSNDEFilterDataSource object will not be + included in the filtering criterion." + DEFVAL { '000000000000'H } + ::= { cseNetflowLSFilterEntry 2 } + +cseNetflowLSFilterDataSourceMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mask to be applied to the corresponding instance of + cseNetflowExportDataSource. + If cseNetflowLSFilterDataSourceMask contains all zeros, + then the cseNetflowLSFilterDataSourceMask object will + not be included in the filtering criterion." + DEFVAL { '000000000000'H } + ::= { cseNetflowLSFilterEntry 3 } + +cseNetflowLSFilterDataDest OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The destination network address used as a filter for + selecting the flows to which the netflow LAN switching data + export feature is applied. + If cseNetflowLSFilterDataDest contains all zeros, then the + cseNetflowLSFilterDataDest object will not be included in + the filtering criterion." + DEFVAL { '000000000000'H } + ::= { cseNetflowLSFilterEntry 4 } + +cseNetflowLSFilterDataDestMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mask to be applied to its corresponding instance + of cseNetflowExportDataDest. + If cseNetflowLSFilterDataDestMask contains all zeros, + then the cseNetflowLSFilterDataDestMask object will not be + included in the filtering criterion." + DEFVAL { '000000000000'H } + ::= { cseNetflowLSFilterEntry 5 } + +cseNetflowLSFilterDataProtocol OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The protocol used as a filter for selecting the + flows to which the netflow LAN switching data export + feature is applied. + The default value is set to 0, to specify that no value + has been set. + If cseNetflowLSFilterDataProtocol is set to 0, then the + cseNetflowLSFilterDataProtocol object will not be included in + the filtering criterion." + DEFVAL { 0 } + ::= { cseNetflowLSFilterEntry 6 } + +cseNetflowLSFilterSelection OBJECT-TYPE + SYNTAX INTEGER { + included(1), + excluded(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The filter set can be chosen either included(1) or + excluded(2). + If this object is set to + included(1) - exports the flows that match + cseNetflowLSFilterDataSource, + cseNetflowLSFilterDataSourceMask, + cseNetflowLSFilterDataDest, + cseNetflowLSFilterDataDestMask and + cseNetflowLSFilterDataProtocol. + + excluded(2) - exports the flows that don't match + cseNetflowLSFilterDataSource, + cseNetflowLSFilterDataSourceMask, + cseNetflowLSFilterDataDest, + cseNetflowLSFilterDataDestMask and + cseNetflowLSFilterDataProtocol." + ::= { cseNetflowLSFilterEntry 7 } + +cseNetflowLSFilterStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status object used to manage the rows in this table. + Once a row becomes active, values within that row cannot be + modified except by deleting and creating the row." + ::= { cseNetflowLSFilterEntry 8 } + + + +cseNetFlowIfIndexEnable OBJECT-TYPE + SYNTAX BITS { + destIfIndex(0), + srcIfIndex(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether ifIndex reporting in NDE (Netflow + Data Export) is enabled. + + if bit destIfIndex(0) is on, destination ifIndex reporting + in NDE is enabled. + + if bit srcIfIndex(1) is on, source ifIndex reporting in NDE + is enabled." + ::= { cseNetflowLS 13 } + +cseNetflowASInfoExportCtrl OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + originate(2), + peer(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether export of Autonomous System(AS) number + information, in the NDE records, is enabled. + + disable - Disables the export of AS number information. + + originate - Enables the export of origination AS numbers of + source and destination IP addresses. + + peer - Enables the export of peer AS numbers of + source and destination IP addresses." + ::= { cseNetflowLS 14 } + +cseNetflowPerVlanIfGlobalEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether 'creation of Netflow entries per + VLAN interface' feature is enabled at the device level. + + If this object is set to 'false', + netflow entries will be created for all VLANs. + + If this object is set to 'true', creation of netflow + entries can be controlled by cseNetflowPerVlanIfCtrlTable." + ::= { cseNetflowLS 15 } + +cseNetflowPerVlanIfCtrlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseNetflowPerVlanIfCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table to control netflow entry creation for each VLAN. + When a VLAN is created, a corresponding entry is added + to this table." + ::= { cseNetflowLS 16 } + +cseNetflowPerVlanIfCtrlEntry OBJECT-TYPE + SYNTAX CseNetflowPerVlanIfCtrlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing the configuration to enable or + disable netflow entry creation for each VLAN." + INDEX { cseNetflowPerVlanIfCtrlVlan } + ::= { cseNetflowPerVlanIfCtrlTable 1 } + +CseNetflowPerVlanIfCtrlEntry ::= SEQUENCE { + cseNetflowPerVlanIfCtrlVlan VlanIndex, + cseNetflowPerVlanIfEnable TruthValue +} + +cseNetflowPerVlanIfCtrlVlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the VLAN number on which creation of netflow + entries is configured." + ::= { cseNetflowPerVlanIfCtrlEntry 1 } + +cseNetflowPerVlanIfEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Specifies whether creation of netflow entries is enabled + on this VLAN. + + If this object is set to 'true', the system will create + netflow entries for this VLAN. + + If this object is set to 'false', the system will not create + any netflow entries for this VLAN. + + When the value of cseNetflowPerVlanIfGlobalEnable is 'false', + this object will not take effect." + ::= { cseNetflowPerVlanIfCtrlEntry 2 } + + +-- L3 switching statistics + +cseL3StatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseL3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing L3 statistics information on each switching + engine." + ::= { cseL3Objects 1 } + +cseL3StatsEntry OBJECT-TYPE + SYNTAX CseL3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of cseL3StatsTable, containing L3 statistics + maintained by a switching engine entity (identified by + entPhysicalIndex). Each switching engine managed by this + MIB module has an entry in this table." + INDEX { entPhysicalIndex } + ::= { cseL3StatsTable 1 } + +CseL3StatsEntry ::= SEQUENCE { + cseL3SwitchedTotalPkts Counter32, + cseL3SwitchedTotalOctets Counter64, + cseL3CandidateFlowHits Counter32, + cseL3EstablishedFlowHits Counter32, + cseL3ActiveFlows Gauge32, + cseL3FlowLearnFailures Counter32, + cseL3IntFlowInvalids Counter32, + cseL3ExtFlowInvalids Counter32, + cseL3SwitchedPktsPerSec Counter32 +} + +cseL3SwitchedTotalPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of packets switched at Layer 3 by this switching + engine." + ::= { cseL3StatsEntry 1 } + +cseL3SwitchedTotalOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in the total packets switched at Layer 3 by this + switching engine." + ::= { cseL3StatsEntry 2 } + +cseL3CandidateFlowHits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of L3 Cache hits for the candidate flow entries in this + switching engine." + ::= { cseL3StatsEntry 3 } + +cseL3EstablishedFlowHits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of L3 Cache hits for established flow entries in this + switching engine." + ::= { cseL3StatsEntry 4 } + +cseL3ActiveFlows OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of active flows in the Layer 3 flow table of this switching + engine." + ::= { cseL3StatsEntry 5 } + +cseL3FlowLearnFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of flows that failed to be learned because the Layer 3 + flow table in this switching engine was full." + ::= { cseL3StatsEntry 6 } + +cseL3IntFlowInvalids OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of flow invalidation events received by this switching + engine from the internal router(s)." + ::= { cseL3StatsEntry 7 } + +cseL3ExtFlowInvalids OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of flow invalidation events received by this switching + engine from external routers." + ::= { cseL3StatsEntry 8 } + +cseL3SwitchedPktsPerSec OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets switched per second at Layer 3 by this + switching engine." + ::= { cseL3StatsEntry 9 } + + +-- Per-VLAN L3 statistics + +cseL3VlanStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseL3VlanStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing per-VLAN, Layer 3 statistics information per + switching engine." + ::= { cseL3Objects 2 } + +cseL3VlanStatsEntry OBJECT-TYPE + SYNTAX CseL3VlanStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row of cseL3VlanStatsTable, containing per-VLAN + Layer 3 statistics maintained by a switching engine (identified + by entPhysicalIndex). An entry exists for each known VLAN for + each switching engine." + INDEX { + entPhysicalIndex, + cseL3VlanIndex + } + ::= { cseL3VlanStatsTable 1 } + +CseL3VlanStatsEntry ::= SEQUENCE { + cseL3VlanIndex VlanIndex, + cseL3VlanInPkts Counter64, + cseL3VlanInOctets Counter64, + cseL3VlanOutPkts Counter64, + cseL3VlanOutOctets Counter64, + cseL3VlanInUnicastPkts Counter64, + cseL3VlanInUnicastOctets Counter64, + cseL3VlanOutUnicastPkts Counter64, + cseL3VlanOutUnicastOctets Counter64 +} + +cseL3VlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Vlan number for which the statistics are maintained by this + entry." + ::= { cseL3VlanStatsEntry 1 } + +cseL3VlanInPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets Layer 3 forwarded from this Vlan to some + other VLAN by this switching engine." + ::= { cseL3VlanStatsEntry 2 } + +cseL3VlanInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in packets Layer-3 forwarded from this Vlan + to some other VLAN by this switching engine." + ::= { cseL3VlanStatsEntry 3 } + +cseL3VlanOutPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets Layer-3 forwarded to this Vlan by this + switching engine." + ::= { cseL3VlanStatsEntry 4 } + +cseL3VlanOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in packets Layer-3 forwarded to this Vlan + by this switching engine." + ::= { cseL3VlanStatsEntry 5 } + +cseL3VlanInUnicastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of unicast packets Layer 3 forwarded from this Vlan + to some other VLAN by this switching engine." + ::= { cseL3VlanStatsEntry 6 } + +cseL3VlanInUnicastOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in unicast packets Layer-3 forwarded from + this Vlan to some other VLAN by this switching engine." + ::= { cseL3VlanStatsEntry 7 } + +cseL3VlanOutUnicastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of unicast packets Layer 3 forwarded to this + Vlan by this switching engine." + ::= { cseL3VlanStatsEntry 8 } + +cseL3VlanOutUnicastOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of octets in unicast packets Layer-3 forwarded + to this Vlan by this switching engine." + ::= { cseL3VlanStatsEntry 9 } + + +-- Switch Engine based layer 3 flow statistics; it is protocol +-- independent, i.e. IP and IPX statistics are not separated +-- This group is an augmentation of cseL3StatsTable + +cseStatsFlowTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseStatsFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of flow statistics per switch engine that is + not covered in cseL3StatsTable." + ::= { cseL3Objects 3 } + +cseStatsFlowEntry OBJECT-TYPE + SYNTAX CseStatsFlowEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row about slot based L3 flow statistics." + AUGMENTS { cseL3StatsEntry } + ::= { cseStatsFlowTable 1 } + +CseStatsFlowEntry ::= SEQUENCE { + cseStatsFlowAged Counter32, + cseStatsFlowPurged Counter32, + cseStatsFlowParityFail Counter32 +} + +cseStatsFlowAged OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of layer 3 flows aged out by hardware. Management + applications can control flow aging by setting the value of + cseFlowEstablishedAgingTime object." + ::= { cseStatsFlowEntry 1 } + +cseStatsFlowPurged OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of layer 3 flows purged by software; it may happen + because a router invalidates certain flows, or a router for which + flows are being switched has been excluded from cseRouterTable, or + access-list has changed, or certain features have been enabled + that would purge certain flows (TCP interception, Web cache are + examples of such features)." + ::= { cseStatsFlowEntry 2 } + +cseStatsFlowParityFail OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total number of memory parity errors on accessing flows in + the cache pools. It may be due to the internal RAM reading + error, not necessarily the corrupted flow data." + ::= { cseStatsFlowEntry 3 } + + +-- Utilization level of flow cache pool per Switch Engine +-- Flows are combined for IP and IPX + +cseCacheUtilTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseCacheUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of utilization levels in percentage of cache + capacity per switch engine. Each row instance is the + current flow utilization information in the cache pool + of the corresponding switching engine." + ::= { cseL3Objects 4 } + +cseCacheUtilEntry OBJECT-TYPE + SYNTAX CseCacheUtilEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance represents layer 3 flow utilization of + a particular cache pool on a switching engine." + INDEX { entPhysicalIndex } + ::= { cseCacheUtilTable 1 } + +CseCacheUtilEntry ::= SEQUENCE { + cseCacheUtilization Gauge32, + cseCacheEntriesCreated Unsigned32, + cseCacheEntriesFailed Unsigned32 +} + +cseCacheUtilization OBJECT-TYPE + SYNTAX Gauge32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Flow utilization level in percentage in this switching engine. + It includes the flow entries for both unicast and multicast. + The lighter the utilization level, the less risk of dropping + flows, i.e. the higher success-rate of flow insertion." + ::= { cseCacheUtilEntry 1 } + +cseCacheEntriesCreated OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the total number of flow entries + successfully created in this switching engine." + ::= { cseCacheUtilEntry 2 } + +cseCacheEntriesFailed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the number of flow entries + which were failed to be created in this switching engine." + ::= { cseCacheUtilEntry 3 } + + +-- L3 error counters table. + +cseErrorStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseErrorStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of IP and IPX error counters per switch engine." + ::= { cseL3Objects 5 } + +cseErrorStatsEntry OBJECT-TYPE + SYNTAX CseErrorStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance represents layer-3 IP and IPX error counters + on a switching engine." + INDEX { entPhysicalIndex } + ::= { cseErrorStatsTable 1 } + +CseErrorStatsEntry ::= SEQUENCE { + cseIpPlenErrors Counter64, + cseIpTooShortErrors Counter64, + cseIpCheckSumErrors Counter64, + cseIpxPlenErrors Counter64, + cseIpxTooShortErrors Counter64 +} + +cseIpPlenErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP length against physical length + errors." + ::= { cseErrorStatsEntry 1 } + +cseIpTooShortErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP length too short errors." + ::= { cseErrorStatsEntry 2 } + +cseIpCheckSumErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP checksum errors." + ::= { cseErrorStatsEntry 3 } + +cseIpxPlenErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IPX length against physical length + errors." + ::= { cseErrorStatsEntry 4 } + +cseIpxTooShortErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IPX length too short errors." + ::= { cseErrorStatsEntry 5 } + + +-- L3 error counters table. + +cseErrorStatsLCTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseErrorStatsLCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of IP and IPX error counters per switch engine." + ::= { cseL3Objects 6 } + +cseErrorStatsLCEntry OBJECT-TYPE + SYNTAX CseErrorStatsLCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A row instance represents layer-3 IP and IPX error counters + on a switching engine." + INDEX { entPhysicalIndex } + ::= { cseErrorStatsLCTable 1 } + +CseErrorStatsLCEntry ::= SEQUENCE { + cseLCIpPlenErrors Counter32, + cseLCIpTooShortErrors Counter32, + cseLCIpCheckSumErrors Counter32, + cseLCIpxPlenErrors Counter32, + cseLCIpxTooShortErrors Counter32 +} + +cseLCIpPlenErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP length against physical length + errors." + ::= { cseErrorStatsLCEntry 1 } + +cseLCIpTooShortErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP length too short errors." + ::= { cseErrorStatsLCEntry 2 } + +cseLCIpCheckSumErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IP checksum errors." + ::= { cseErrorStatsLCEntry 3 } + +cseLCIpxPlenErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IPX length against physical length + errors." + ::= { cseErrorStatsLCEntry 4 } + +cseLCIpxTooShortErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of IPX length too short errors." + ::= { cseErrorStatsLCEntry 5 } + + + +-- Packets Switched Per Second + +cseL3SwitchedAggrPktsPerSec OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets switched per second at Layer 3 by the + entire system." + ::= { cseL3Objects 7 } + +-- Protocol Filter capability + +cseProtocolFilterEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates if protocol filtering is enabled in the device." + ::= { cseProtocolFilter 1 } + +cseProtocolFilterPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseProtocolFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing the protocol filtering configuration and status + information on ports." + ::= { cseProtocolFilter 2 } + +cseProtocolFilterPortEntry OBJECT-TYPE + SYNTAX CseProtocolFilterPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseProtocolFilterPortTable, + representing a Protocol filter configuration + status information for a particular + port (identified by ifIndex) and protocol type." + INDEX { + ifIndex, + cseProtocolFilterPortProtocol + } + ::= { cseProtocolFilterPortTable 1 } + +CseProtocolFilterPortEntry ::= SEQUENCE { + cseProtocolFilterPortProtocol INTEGER, + cseProtocolFilterPortAdminStatus INTEGER, + cseProtocolFilterPortOperStatus INTEGER +} + +cseProtocolFilterPortProtocol OBJECT-TYPE + SYNTAX INTEGER { + ip(1), + ipx(2), + grpProtocols(3) -- Appletalk/Decnet/Vines + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The protocol (group) to filter, used here as the secondary + index." + ::= { cseProtocolFilterPortEntry 1 } + +cseProtocolFilterPortAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2), + auto(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An indication of the administrative status of the protocol + filtering on this interface. + + - on(1) indicates that the interface will send and receive the + traffic for protocol specified in + cseProtocolFilterPortProtocol. + - off(2) indicates that the interface will not receive + traffic for this protocol, or if this feature is not + supported. + - auto(3) indicates that the corresponding + cseProtocolFilterPortOperStatus will transit to 'on' after + receiving one packet of this protocol type." + ::= { cseProtocolFilterPortEntry 2 } + +cseProtocolFilterPortOperStatus OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2), + notSupported(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the operational status of filtering for + this protocol on this interface. + - on(1) indicates that the interface will send and receive the + protocol traffic. + - off(2) indicates that the interface will drop all traffic + belonging to this protocol. + - notSupported(3) indicates the hardware does not support + protocol filtering." + ::= { cseProtocolFilterPortEntry 3 } + + +-- This MIB group/table is designed for control of purging flow caches +-- The caches are distributed in the switching engines across the system + +cseUcastCacheTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseUcastCacheEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A control table used to purge certain types of IP/IPX layer 3 + unicast flows stored in the cache pool." + ::= { cseUcastCache 1 } + +cseUcastCacheEntry OBJECT-TYPE + SYNTAX CseUcastCacheEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseUcastCacheTable, used to set up + flow clearing criteria. The actual purging is started by setting + the value of cseUcastCacheStatus to 'active'. Once a row becomes + active, values within the row cannot be modified, except by + setting it to 'notInService' first or deleting and re-creating + the row." + INDEX { cseUcastCacheIndex } + ::= { cseUcastCacheTable 1 } + +CseUcastCacheEntry ::= SEQUENCE { + cseUcastCacheIndex Unsigned32, + cseUcastCacheFlowType INTEGER, + cseUcastCacheTransport INTEGER, + cseUcastCacheDest FlowAddressComponent, + cseUcastCacheDestMask FlowAddressComponent, + cseUcastCacheSource FlowAddressComponent, + cseUcastCacheSrcMask FlowAddressComponent, + cseUcastCacheRtrIp IpAddress, + cseUcastCacheOwner OwnerString, + cseUcastCacheResult INTEGER, + cseUcastCacheStatus RowStatus +} + +cseUcastCacheIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer which uniquely identifies the flow + purge contained in this row instance." + ::= { cseUcastCacheEntry 1 } + +cseUcastCacheFlowType OBJECT-TYPE + SYNTAX INTEGER { + any(1), + dstOnly(2), + srcOrDst(3), + srcAndDst(4), + fullFlow(5), + ipxDstOnly(6), + ipxSrcAndDst(7) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting each value causes the appropriate action: + + 'dstOnly' - causes purge of flows in the cache whose absolute + destination IP addresses match the address part of the value set + in the cseUcastCacheDest object. If cseUcastCacheDestMask is also + specified at the same time, it will be applied to the address part + of cseUcastCacheDest. + + 'srcOrDst' - causes purge of flows in the cache whose either + absolute source or destination IP addresses match the address + parts of the values set in cseUcastCacheSource or + cseUcastCacheDest. + If cseUcastCacheDestMask/cseUcastCacheSrcMask also specified, + they will be applied to the address parts of cseUcastCacheSource/ + cseUcastCacheDest appropriately. + + 'srcAndDst' - causes purge of flows in the cache whose both + absolute source and destination IP addresses match the address + parts of values set in cseUcastCacheSource and cseUcastCacheDest + objects. If cseUcastCacheSrcMask and cseUcastCacheDestMask also + specified, they will be applied to the address parts of + cseUcastCacheSource and cseUcastCacheDest. + + 'fullFlow' - causes purge of IP flows whose IP addresses and + transport port numbers match the values set in cseUcastCacheDest + and cseUcastCacheSource objects. + If either cseUcastCacheDestMask or cseUcastCacheSrcMask objects + have valid values, they will be applied to the respective address + parts of cseUcastCacheDest and cseUcastCacheSource objects. + This option is typically used to purge flows relevant to specific + applications such as FTP, WWW, TELNET, etc. + + 'ipxDstOnly' - causes purge of IPX flows in the cache whose + absolute destination IPX address match the address part of + the value set in cseUcastCacheDest object. + if cseUcastCacheDestMask holds valid value at the same time, + it will be applied to the address part of cseUcastCacheDest. + + 'ipxSrcAndDst' - causes purge of IPX flows in the cache whose + both absolute source and destination IPX addresses match the + address parts of the values set in cseUcastCacheSource and + cseUcastCacheDest objects. + If either of cseUcastCacheSrcMask or cseUcastCacheDestMask + have valid values at the same time, they will be applied to + the respective address parts of cseUcastCacheSource and + cseUcastCacheDest objects. + + 'any' - causes purge of all established flows currently in + the cache. The values of cseUcastCacheDest, cseUcastCacheSource, + cseUcastCacheDestMask, cseUcastCacheSrcMask, and + cseUcastCacheTransport should be ignored in this case. + + Note: + 1. When the row instance is initialized, the value of this + object instance will be set to 'any'. + 2. The rest flow parameter variables will not be instantiated + until they get set by management applications based on + the value of cseUcastCacheFlowType object." + DEFVAL { any } + ::= { cseUcastCacheEntry 2 } + +cseUcastCacheTransport OBJECT-TYPE + SYNTAX INTEGER { + udp(1), + tcp(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP transport protocol type (if applicable) of the specified + switched flows to be purged; it will be instantiated if and only + if it gets set by the management applications and the value of + cseUcastCacheFlowMask is equal to 'fullFlow'. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 3 } + +cseUcastCacheDest OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Destination network address and port number (if applicable). + The port field is ignored for IPX flows and IP flows if the + value of cseUcastCacheFlowMask is not equal to 'fullFlow'. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 4 } + +cseUcastCacheDestMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If instantiated, specified and applicable, the destination + address mask will be applied to the value of + cseUcastCacheDest in the same row instance. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 5 } + +cseUcastCacheSource OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source network address and port number (if applicable). + The port field is ignored for IPX flows and IP flows if the + value of cseUcastCacheFlowMask is not equal to 'fullFlow'. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 6 } + +cseUcastCacheSrcMask OBJECT-TYPE + SYNTAX FlowAddressComponent + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If instantiated, specified and applicable, the source address + mask will be applied to the value of cseUcastCacheSource + in the same row instance. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 7 } + +cseUcastCacheRtrIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP address of the router (internal or external) for which the + flows are being switched, and need to be purged. An 'all-zero' + value is a wildcard IP address for any router. + Its value can not be modified when the corresponding instance + of cseUcastCacheStatus is 'active'." + ::= { cseUcastCacheEntry 8 } + +cseUcastCacheOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The manager entity that configured this entry and is therefore + using the resources assigned to it." + ::= { cseUcastCacheEntry 9 } + +cseUcastCacheResult OBJECT-TYPE + SYNTAX INTEGER { + purging(1), + notPurging(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "state of the flow purging operation. + + 'purging' - purging operation is proceeding + + 'notPurging' - the purging operation completed, or not + started yet." + DEFVAL { notPurging } + ::= { cseUcastCacheEntry 11 } + +cseUcastCacheStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status object used to manage rows in this table. + When set to active(1), the flow purge is initiated, and + the value of cseUcastCacheResult object becomes 'purging'. + However, this object can be set to active(1) only after + all the appropriate objects for this query as defined + by the value set in the cseUcastCacheFlowType object, + have also been set. Upon the completion of flow purge, + the value of cseUcastCacheResult object changes to + 'notPurging'. + Once a row becomes active, values within the row cannot + be modified, except by setting it to 'notInService' first, + or deleting and re-creating it." + ::= { cseUcastCacheEntry 10 } + + +-- This MIB group/table is designed for purging IP multicast +-- flows. For a multicast switch, a row instance can be used to clear +-- specified multicast L3 flows from its cache pools + +cseMcastCacheTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseMcastCacheEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A control table used to purge specified IP multicast flows + from the switch engine." + ::= { cseMcastCache 1 } + +cseMcastCacheEntry OBJECT-TYPE + SYNTAX CseMcastCacheEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the cseMcastCacheTable, used to set up + flow clearing criteria. The actual purging is started by setting + the value of cseMcastCacheStatus to 'active'. Once a row becomes + active, values within the row cannot be modified, except by + setting it to 'notInService' first, or deleting and re-creating + the row." + INDEX { cseMcastCacheIndex } + ::= { cseMcastCacheTable 1 } + +CseMcastCacheEntry ::= SEQUENCE { + cseMcastCacheIndex Unsigned32, + cseMcastCacheFlowType INTEGER, + cseMcastCacheGrp McastGroupIp, + cseMcastCacheSrc IpAddress, + cseMcastCacheRtrIp IpAddress, + cseMcastCacheOwner OwnerString, + cseMcastCacheResult INTEGER, + cseMcastCacheStatus RowStatus +} + +cseMcastCacheIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer which uniquely identifies the flow + purge contained in the current row instance." + ::= { cseMcastCacheEntry 1 } + +cseMcastCacheFlowType OBJECT-TYPE + SYNTAX INTEGER { + any(1), + group(2), + grpAndSrc(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting each value causes the appropriate action: + + 'any' - causes purge of all established IP multicast + layer 3 flows in the cache. The value of cseMcastCacheGrp, + and cseMcastCacheSrc will be ignored in this case. + + 'group' - causes purge of flows whose multicast + group IP address match the values of cseMcastCacheGrp. + + 'grpAndSrc' - causes purge of multicast flows whose both + group IP address and source Ip address match the + values of cseMcastCacheGrp and cseMcastCacheSrc. + + Note: + 1. The instance of this object is initialized to + 'any' when the corresponding row instance is + being instantiated. + 2. Flow parameter variables, cseMcastCacheGrp, + cseMcastCacheSrc, cseMcastCacheRtrIp will not + be instantiated until they get set by management + applications (in such cases, cseMcastCacheFlowType + object should be set to a value other than 'any')." + DEFVAL { any } + ::= { cseMcastCacheEntry 2 } + +cseMcastCacheGrp OBJECT-TYPE + SYNTAX McastGroupIp + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Specifying multicast group IP address of the flows to be + cleared. Its value can not be modified when the corresponding + instance of cseMcastCacheStatus is 'active'." + ::= { cseMcastCacheEntry 3 } + +cseMcastCacheSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The source address of the IP multicast flows to be purged. + Its value can not be modified when the corresponding instance + of cseMcastCacheStatus is 'active'." + ::= { cseMcastCacheEntry 4 } + +cseMcastCacheRtrIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP address of the router whose flows are currently + being switched, and will be purged. An 'all-zero' value is + a wildcard IP address for any router. + Its value can not be modified when the corresponding instance + of cseMcastCacheStatus is 'active'." + ::= { cseMcastCacheEntry 5 } + +cseMcastCacheOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The manager entity that configured this entry and is therefore + using the resources assigned to it." + ::= { cseMcastCacheEntry 6 } + +cseMcastCacheResult OBJECT-TYPE + SYNTAX INTEGER { + purging(1), + notPurging(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "state of the flow purging operation. + + 'purging' - purging operation is proceeding + + 'notPurging' - the purging operation completed, or not + started yet." + DEFVAL { notPurging } + ::= { cseMcastCacheEntry 7 } + +cseMcastCacheStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status object used to manage rows in this table. + When set to active(1), the flow purge is initiated, and + the value of cseMcastCacheResult object becomes 'purging'. + However, this object can be set to active(1) only after + all the appropriate objects for this query as defined + by the value set in the cseMcastCacheFlowType object, + have also been set. Upon the completion of flow purge, + the value of cseMcastCacheResult object changes to + 'notPurging'. + Once a row becomes active, values within the row cannot + be modified, except by setting it to 'notInService' first, + or deleting and re-creating it." + ::= { cseMcastCacheEntry 8 } + + +-- cseCef Group +-- + +-- +-- The cseCefFibTable + +cseCefFibTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseCefFibEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the information stored in the device's + forwarding information base (FIB). + + FIB is a forwarding scheme that utilizes matching pattern + to provide optimized lookup for efficient packet forwarding. + It contains a forwarding table which consist of matching + criteria for incoming traffic as well as information to + forward traffic that matched defined criteria." + ::= { cseCef 1 } + +cseCefFibEntry OBJECT-TYPE + SYNTAX CseCefFibEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row contains the IP address type, the final destination + IP address, the final destination IP address mask as well as + the FIB entry type." + INDEX { cseCefFibIndex } + ::= { cseCefFibTable 1 } + +CseCefFibEntry ::= SEQUENCE { + cseCefFibIndex Unsigned32, + cseCefFibAddrType InetAddressType, + cseCefFibDestIp InetAddress, + cseCefFibDestIpMask InetAddress, + cseCefFibType INTEGER +} + +cseCefFibIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index of this table entry." + ::= { cseCefFibEntry 1 } + +cseCefFibAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of IP address denoted in cseCefFibDestIp and + cseCefFibDestIpMask object." + ::= { cseCefFibEntry 2 } + +cseCefFibDestIp OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination IP address specified in IP packet header." + ::= { cseCefFibEntry 3 } + +cseCefFibDestIpMask OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The specified destination IP address mask." + ::= { cseCefFibEntry 4 } + +cseCefFibType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + resolved(2), + bridge(3), + drop(4), + connected(5), + receive(6), + wildcard(7), + tunnel(8), + default(9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the FIB entry type. + + other(1) indicates that this FIB entry type is none + of the following. + + resolved(2) indicates that IP traffic matched the + destination prefix of this entry is associated with a + valid next-hop address. + + bridge(3) indicates that IP traffic matched the destination + prefix of this entry will be forwarded using Layer 2 + look up result. + + drop(4) indicates that IP traffic matched the destination + prefix of this entry will be dropped. + + connected(5) indicates that IP traffic matched the destination + prefix of this entry is associated with a connected network. + + receive(6) indicates that IP traffic matched the destination + prefix of this entry will be sent to a router interface. + + wildcard(7) indicates this FIB entry will match all traffic. + + tunnel(8) indicates this FIB entry applied to tunneling + traffic. + + default(9) indicates that IP traffic matched the destination + prefix of this entry will be forwarded using a default route." + ::= { cseCefFibEntry 5 } + + +-- The cseCefAdjacencyTable + +cseCefAdjacencyTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseCefAdjacencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains information stored in the device's + adjacency table. Entry in this table is linked to entry + of cseCefFibTable by its cseCefFibIndex object." + ::= { cseCef 3 } + +cseCefAdjacencyEntry OBJECT-TYPE + SYNTAX CseCefAdjacencyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row contains next hop IP address, next-hop Ethernet + address, adjacency type, and number of bytes and packets + transmitted to each adjacency entry. Next hop encapsulation + type and MTU value are also available if supported by the + device." + INDEX { + cseCefFibIndex, + cseCefAdjacencyIndex + } + ::= { cseCefAdjacencyTable 1 } + +CseCefAdjacencyEntry ::= SEQUENCE { + cseCefAdjacencyIndex Unsigned32, + cseCefAdjacencyAddrType InetAddressType, + cseCefAdjacencyNextHopIp InetAddress, + cseCefAdjacencyNextHopMac MacAddress, + cseCefAdjacencyNextHopIfIndex InterfaceIndexOrZero, + cseCefAdjacencyType INTEGER, + cseCefAdjacencyPkts Counter64, + cseCefAdjacencyOctets Counter64, + cseCefAdjacencyEncap INTEGER, + cseCefAdjacencyMTU Unsigned32 +} + +cseCefAdjacencyIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The adjacency index of this table entry." + ::= { cseCefAdjacencyEntry 1 } + +cseCefAdjacencyAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of IP address denoted in cseCefAdjacencyNextHopIp + object." + ::= { cseCefAdjacencyEntry 2 } + +cseCefAdjacencyNextHopIp OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The next hop IP address." + ::= { cseCefAdjacencyEntry 3 } + +cseCefAdjacencyNextHopMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The next hop Ethernet address." + ::= { cseCefAdjacencyEntry 4 } + +cseCefAdjacencyNextHopIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the next hop interface ifIndex." + ::= { cseCefAdjacencyEntry 5 } + +cseCefAdjacencyType OBJECT-TYPE + SYNTAX INTEGER { + other(1), + punt(2), + glean(3), + drop(4), + null(5), + noRewrite(6), + forceDrop(7), + connect(8), + unresolved(9), + loopback(10), + tunnel(11) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates this adjacency entry type. + + other(1) indicates the adjacency entry type is none of + the following. + + punt(2) indicates entry that sends traffic to the router. + + glean(3) indicates entry that needs to be gleaned for incoming + traffic. + + drop(4) indicates entry that drops packets. + + null(5) indicates entry that drops packets destined + for the Null0 interface. + + noRewrite(6) indicates entry that sends traffic to the router + when rewrite information is incomplete. + + forceDrop(7) indicates entry that drop packets due to ARP + throttling. + + connect(8) indicates entry that contains complete rewrite + information. + + unresolved(9) indicates entry that next hop traffic is + unresolved. + + loopback(10) indicates entry that drops packets destined + for loopback interface. + + tunnel(11) indicates entry that next hop traffic is + through a tunnel." + ::= { cseCefAdjacencyEntry 6 } + +cseCefAdjacencyPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of Layer 3 packets transmitted to + this adjacency entry." + ::= { cseCefAdjacencyEntry 7 } + +cseCefAdjacencyOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the number of Layer 3 octets transmitted to + this adjacency entry." + ::= { cseCefAdjacencyEntry 8 } + +cseCefAdjacencyEncap OBJECT-TYPE + SYNTAX INTEGER { + arpa(1), + raw(2), + sap(3), + snap(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the next hop destination encapsulation type. + + arpa(1) indicates that next hop destination used ARPA + encapsulation type to forward packets. + + raw(2) indicates that next hop destination used RAW + encapsulation type to forward packets. + + sap(3) indicates that next hop destination used SAP + encapsulation type to forward packets. + + snap(4) indicates that next hop destination used SNAP + encapsulation type to forward packets." + ::= { cseCefAdjacencyEntry 9 } + +cseCefAdjacencyMTU OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the next hop destination MTU value." + ::= { cseCefAdjacencyEntry 10 } + + +-- cseTcamUsage group +-- + +-- +-- The cseTcamUsageTable + +cseTcamUsageTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseTcamUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the resource usage of TCAM (Ternary + Content Addressable Memory) in the device. Not all the + resource types denoted by cseTcamResourceType object + are supported. If that is the case, the corresponding row + for that type will not be instantiated in this table." + ::= { cseTcamUsage 1 } + +cseTcamUsageEntry OBJECT-TYPE + SYNTAX CseTcamUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row contains a short description of the resource type, + the total amount of TCAM allocated for that type as well + as the amount of allocated resource has been used up." + INDEX { + entPhysicalIndex, + cseTcamResourceType + } + ::= { cseTcamUsageTable 1 } + +CseTcamUsageEntry ::= SEQUENCE { + cseTcamResourceType INTEGER, + cseTcamResourceDescr SnmpAdminString, + cseTcamResourceUsed Unsigned32, + cseTcamResourceTotal Unsigned32 +} + +cseTcamResourceType OBJECT-TYPE + SYNTAX INTEGER { + aclStorageMask(1), + aclStorageValue(2), + aclDynamicStorageMask(3), + aclDynamicStorageValue(4), + qosStorageMask(5), + qosStorageValue(6), + qosDynamicStorageMask(7), + qosDynamicStorageValue(8), + l4PortOperator(9), + interfaceMapping(10), + ingressInterfaceMapping(11), + egressInterfaceMapping(12), + louSource(13), + louDestination(14), + andOr(15), + orAnd(16), + aclAdjacency(17), + aclHighStorageMask(18), + aclHighStorageValue(19), + aclLowStorageMask(20), + aclLowStorageValue(21), + qosHighStorageMask(22), + qosHighStorageValue(23), + qosLowStorageMask(24), + qosLowStorageValue(25), + sgacl(26), + accounting(27), + ipv6Ext(28), + ethertype(29), + destInfo(30), + dgtSgtRegion(31), + anyAnyRegion(32), + tcamALabel(33), + tcamBLabel(34), + destInfoIn(35), + destInfoOut(36), + tcam0Bank0(37), + tcam0Bank1(38), + tcam1Bank0(39), + tcam1Bank1(40), + tcam0Aggregate(41), + tcam1Aggregate(42), + bank0Aggregate(43), + bank1Aggregate(44), + lou(45), + bothLouOperands(46), + singleLouOperands(47), + louL4SourcePort(48), + louL4DstPort(49), + louL3PacketLength(50), + louIpTos(51), + louIpDscp(52), + louIpPrecedence(53), + louIpTtl(54), + tcpFlags(55), + l4DynamicProtocolCam(56), + macEtypeOrProtoCam(57), + nonL4OpLabelsTcam0(58), + nonL4OpLabelsTcam1(59), + l4OpLabelTcam0(60), + l4OpLabelTcam1(61), + ingressDestInfoTable(62), + egressDestInfoTable(63), + ingressTcam(64), + ingressIpv6Tcam(65), + ingressLou(66), + ingressBothLouOperands(67), + ingressSingleLouOperands(68), + ingressLouL4SourcePort(69), + ingressLouL4DstPort(70), + ingressLouL3PacketLength(71), + ingressLouL3Ttl(72), + ingressLouL2Ttl(73), + ingressTcpFlags(74), + egressTcam(75), + egressIpv6Tcam(76), + egressLou(77), + egressBothLouOperands(78), + egressSingleLouOperands(79), + egressLouL4SourcePort(80), + egressLouL4DstPort(81), + egressLouL3PacketLength(82), + egressLouL3Ttl(83), + egressLouL2Ttl(84), + egressTcpFlags(85), + l4OpLabelTcam2(86), + l4OpLabelTcam3(87), + l4OpLabelTcam4(88), + l4OpLabelTcam5(89), + l4OpLabelTcam6(90), + l4OpLabelTcam7(91), + l4OpLabelTcam8(92), + l4OpLabelTcam9(93), + l4OpLabelTcam10(94), + l4OpLabelTcam11(95), + l4OpLabelTcam12(96), + l4OpLabelTcam13(97), + l4OpLabelTcam14(98), + l4OpLabelTcam15(99), + l4OpLabelTcam16(100), + l4OpLabelTcam17(101), + l4OpLabelTcam18(102), + l4OpLabelTcam19(103), + ingressPacl(104), + ingressVacl(105), + ingressRacl(106), + ingressRbacl(107), + ingressNbm(108), + ingressL2Qos(109), + ingressL3VlanQos(110), + ingressSup(111), + ingressL2SpanAcl(112), + ingressL3VlanSpanAcl(113), + ingressFstat(114), + ingressLatency(115), + span(116), + nat(117), + egressVacl(118), + egressRacl(119), + egressRbacl(120), + egressSup(121), + egressL2Qos(122), + egressL3VlanQos(123), + netflowAnalyticsFilterTcam(124), + ingressNetflowL3(125), + ingressNetflowL2(126), + featureVxLanOam(127), + featureBfd(128), + featureDhcpSnoop(129), + ingressRedirect(130), + featureDhcpV6Relay(131), + featureArpSnoop(132), + featureDhcpSnoopFhs(133), + featureDhcpVaclFhs(134), + featureDhcpSisf(135), + egressSystem(136), + rplusEgressSystem(137), + supSystem(138), + rplusSupSystem(139), + fmSupSystem(140), + supCopp(141), + rplusSupCopp(142), + supCoppReasonCode(143), + ingressIpv4Pacl(144), + ingressIpv6Pacl(145), + ingressMacPacl(146), + ingressFexIpv4Pacl(147), + ingressFexIpv6Pacl(148), + ingressFexMacPacl(149), + ingressIpv4PortQos(150), + ingressIpv4PortQosLite(151), + ingressIpv6PortQos(152), + ingressMacPortQos(153), + ingressIpv4FexPortQos(154), + ingressIpv4FexPortQosLite(155), + ingressIpv6FexPortQos(156), + ingressMacFexPortQos(157), + ingressIpv4Vacl(158), + ingressIpv6Vacl(159), + ingressMacVacl(160), + ingressIpv4VlanQos(161), + ingressIpv4VlanQosLite(162), + ingressIpv6VlanQos(163), + ingressMacVlanQos(164), + ingressIpv4Racl(165), + ingressIpv6Racl(166), + ingressIpv4L3Qos(167), + ingressIPv4L3QosLite(168), + ingressIPv6L3Qos(169), + ingressMacL3Qos(170), + ingressFlowCounters(171), + ingressSviCounters(172), + egressIpv4Vacl(173), + egressIpv6Vacl(174), + egressMacVacl(175), + egressIpv4Qos(176), + egressIpv4QosLite(177), + egressIpv6Qos(178), + egressMacQos(179), + rplusIngressEgressIpv4Qos(180), + redirect(181), + rplusIngressEgressIpv4QosLite(182), + rplusIngressEgressIpv6Qos(183), + rplusIngressEgressMacQos(184), + egressIpv4Racl(185), + egressIpv6Racl(186), + egressFlowCounters(187), + ingressNsIpv4PortQos(188), + ingressNsIpv6PortQos(189), + ingressNsMacPortQos(190), + ingressNsIpv4VlanQos(191), + ingressNsIpv6VlanQos(192), + ingressNsMacVlanQos(193), + ingressNsIpv4L3Qos(194), + ingressNsIpv6L3Qos(195), + vpcConvergence(196), + ipsgSmacIpBindingTable(197), + openflowAcl(198), + openflowIpv6Acl(199), + ingressEtherAcl(200), + mplsFeature(201), + ingressIpv4Qos(202), + ingressIpv6Qos(203), + ipv6Sup(204), + ingressIpv4Pbr(205), + ingressIpv6Pbr(206), + ingressIpv4PaclDoubleWide(207), + arpAcl(208), + sflowNorthstarAcl(209), + mcastBidir(210), + redirectTunnel(211), + ingressFcoeCounters(212), + egressFcoeCounters(213), + spanSflowCombined(214), + mcastPerformance(215), + fhs(216), + openflowLiteAcl(217), + ipv6DestCompression(218), + ingressIpv4RaclLite(219), + ipv6SrcCompression(220), + ipv4RaclSpanUdf(221), + ingressIpv4PortQosIntraTcamLite(222), + ingressIpv4L3QosIntraTcamLite(223), + ingressIpv4VlanQosIntraTcamLite(224), + ipv4PaclSpanUdf(225), + coppSystem(226), + ingressIpv4PaclLite(227), + ingressIpv4VaclLite(228), + vxLanXConnect(229), + dot1X(230), + dot1XMultiAuth(231), + ingressPaclAll(232), + ingressRaclAll(233), + ingressVaclAll(234), + ingressMacPqos(235), + ingressIpv4Pqos(236), + ingressIpv6Pqos(237), + ingressPqos(238), + ingressMacVqos(239), + ingressIpv4Vqos(240), + ingressIpv6Vqos(241), + ingressVqosAll(242), + ingressIpv4L3qos(243), + ingressIpv6L3qos(244), + ingressL3qosAll(245), + ingressCopp(246), + ingressMacSpan(247), + ingressIpv4Span(248), + ingressSpan(249), + ingressSpanAll(250), + egressRaclAll(251), + egressVaclAll(252), + egressMacPortQos(253), + egressIpv4PortQos(254), + egressIv6PortQos(255), + egressPortQos(256), + egressMacVlanQos(257), + egressIpv4VlanQos(258), + egressIpv6VlanQos(259), + egressVlanQos(260), + egressIpv4L3Qos(261), + egressIpv6L3Qos(262), + egressL3QosAll(263), + egressMacSpan(264), + egressIpv4Span(265), + egressIpv6Span(266), + egressSpanAll(267), + dhcp(268), + labelLblA(269), + labelLblB(270), + labelLblD(271), + labelLblE(272), + labelLblF(273), + labelLblG(274), + labelLblH(275), + labelLblI(276), + labelLblK(277), + ingressSupAll(278), + egressSupAll(279), + ingressVlanSpan(280), + ingressNetflow(281), + ingressCntAcl(282), + egressCntAcl(283), + ingressHwTelemetry(284), + labelLblAv1(285), + labelLblBv1(286), + labelLblCv1(287), + labelLblDv1(288), + labelLblEv1(289), + labelLblFv1(290), + labelLblGv1(291), + labelLblHv1(292), + labelLblIv1(293), + labelLblJv1(294), + labelLblKv1(295), + labelLblLv1(296), + labelLblMv1(297), + labelLblNv1(298), + labelLblOv1(299), + labelLblPv1(300), + labelLblQv1(301), + labelLblRv1(302), + ingressNetflowAnalytics(303), + ingressNatOutside(304), + ingressNatInside(305), + ingressL2L3QosAll(306), + natRewriteTable(307), + tcpAwareNat(308) + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The resource type which take up TCAM space. + + aclStorageMask(1) indicates that TCAM space is allocated + to store ACL masks. + + aclStorageValue(2) indicates that TCAM space is allocated + to store ACL value. + + aclDynamicStorageMask(3) indicates that TCAM space is + allocated to dynamically store ACL masks. + + aclDynamicStorageValue(4) indicates that TCAM space is + allocated to dynamically store ACL values. + + qosStorageMask(5) indicates that TCAM space is allocated + to store QoS masks. + + qosStorageValue(6) indicates that TCAM space is allocated + to store QoS value. + + qosDynamicStorageMask(7) indicates that TCAM space is + allocated to dynamically store QoS masks. + + qosDynamicStorageValue(8) indicates that TCAM space is + allocated to dynamically store QoS values. + + l4PortOperator(9) indicates that TCAM space is allocated + for layer 4 port operators purpose. + + interfaceMapping(10) indicates that TCAM space is allocated + for interface mapping purpose. + + ingressInterfaceMapping(11) indicates that TCAM space is + allocated for ingress interface mapping purpose. + + egressInterfaceMapping(12) indicates that TCAM space is + allocated for egress interface mapping purpose. + + louSource(13) indicates that TCAM space is allocated + as source LOUs (Logical Operation Unit). + + louDestination(14) indicates that TCAM space is allocated + as destination LOUs. + + andOr(15) indicates that TCAM space is allocated for + ANDOR purpose. + + orAnd(16) indicates that TCAM space is allocated for + ORAND purpose. + + aclAdjacency(17) indicates that TCAM space is allocated + for ACL adjacency purpose. + + aclHighStorageMask(18) indicates that high bank TCAM + space is allocated to store ACL masks. + + aclHighStorageValue(19) indicates that high bank TCAM + space is allocated to store ACL value. + + aclLowStorageMask(20) indicates that low bank TCAM space + is allocated to store ACL masks. + + aclLowStorageValue(21) indicates that low bank TCAM space + is allocated to store ACL values. + + qosHighStorageMask(22) indicates that high bank TCAM space + is allocated to store QoS masks. + + qosHighStorageValue(23) indicates that high bank TCAM space + is allocated to store QoS value. + + qosLowStorageMask(24) indicates that low bank TCAM space is + allocated to store QoS masks. + + qosLowStorageValue(25) indicates that low bank TCAM space is + allocated to store QoS values. + + sgacl(26) indicates that TCAM space is allocated for SGACL + (Security Group Access Control List) purpose. + + accounting(27) indicates that TCAM space is allocated + for accounting purpose such as AS (Autonomous System) + based accounting, classification based accounting. + + ipv6Ext(28) indicates that TCAM space is allocated for + IPv6 Extended Header lookup purpose. + + ethertype(29) indicates that TCAM space is allocated for + layer2 ethertype lookup purpose. + + destInfo(30) indicates that TCAM space is allocated for + destination information lookup purpose. + + dgtSgtRegion(31) indicates that TCAM space is allocated for + specific SGT (Secutiry Group Tag), DGT (Destination Group Tag) + pairs. + + anyAnyRegion(32) indicates that TCAM space is allocated for + SGT (Secutiry Group Tag), DGT (Destination Group Tag) pairs + with one or both of them as ANY. + + tcamALabel(33) indicates that TCAM space is allocated for + labels used by TCAM A entries. + + tcamBLabel(34) indicates that TCAM space is allocated for + labels used by TCAM B entries. + + destInfoIn(35) indicates that TCAM space is allocated for + destination information table for IFE (Ingress Forwarding Engine) + ACL redirects. + + destInfoOut(36) indicates that TCAM space is allocated for + destination information table for OFE (Output/Egress Forwarding + Engine) ACL redirects. + + tcam0Bank0(37) indicates that TCAM space is allocated for + TCAM 0 Bank 0. + + tcam0Bank1(38) indicates that TCAM space is allocated for + TCAM 0 Bank 1. + + tcam1Bank0(39) indicates that TCAM space is allocated for + TCAM 1 Bank 0. + + tcam1Bank1(40) indicates that TCAM space is allocated for + TCAM 1 Bank 1. + + tcam0Aggregate(41) indicates that TCAM space is allocated for + the aggregate of Bank 0 and Bank 1 on TCAM 0. + + tcam1Aggregate(42) indicates that TCAM space is allocated for + the aggregate of Bank 0 and Bank 1 on TCAM 1. + + bank0Aggregate(43) indicates that TCAM space is allocated for + the aggregate of TCAM 0 and TCAM 1 for Bank 0. + + bank1Aggregate(44) indicates that TCAM space is allocated for + the aggregate of TCAM 0 and TCAM 1 for Bank 1. + + lou(45) indicates that TCAM space is allocated for + LOUs (Logical Operation Unit). + + bothLouOperands(46) indicates that TCAM space is allocated for + LOUs with both operands. + + singleLouOperands(47) indicates that TCAM space is allocated for + LOUs with single operands. + + louL4SourcePort(48) indicates that TCAM space is allocated for + LOUs with L4 source port in comparison. + + louL4DstPort(49) indicates that TCAM space is allocated for + LOUs with L4 destination port in comparison. + + louL3PacketLength(50) indicates that TCAM space is allocated for + LOUs with L3 Length in comparison. + + louIpTos(51) indicates that TCAM space is allocated for + LOUs with IP ToS (Type of Service) in comparison. + + louIpDscp(52) indicates that TCAM space is allocated for + LOUs with IP DSCP (Differentiated Services Code Point) + in comparison. + + louIpPrecedence(53) indicates that TCAM space is allocated for + LOUs with IP Precedence in comparison. + + louIpTtl(54) indicates that TCAM space is allocated for + LOUs with IP TTL in comparison. + + tcpFlags(55) indicates that TCAM space is allocated for + TCP Flags. + + l4DynamicProtocolCam(56) indicates that TCAM space is allocated for + L4 Dynamic Protocol CAM. + + macEtypeOrProtoCam(57) indicates that TCAM space is allocated for + MAC Etype or Protocol CAM. + + nonL4OpLabelsTcam0(58) indicates that TCAM space is allocated for + labels without using any L4 operator resources like LOUs or TCP Flags + for TCAM 0. + + nonL4OpLabelsTcam1(59) indicates that TCAM space is allocated for + labels without using any L4 operator resources like LOUs or TCP Flags + for TCAM 1. + + l4OpLabelTcam0(60) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 0. + + l4OpLabelTcam1(61) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 1. + + ingressDestInfoTable(62) indicates that TCAM space is allocated for + Ingress Destination Info Table. + + egressDestInfoTable(63) indicates that TCAM space is allocated for + Egress Destination Info Table. + + ingressTcam(64) indicates that ingress TCAM resource utilization. + + ingressIpv6Tcam(65) indicates that ingress TCAM space is allocated + for IPv6 compression. + + ingressLou(66) indicates that ingress TCAM space is allocated for + LOUs (Logical Operation Unit). + + ingressBothLouOperands(67) indicates that ingress TCAM space is + allocated for LOUs with both operands. + + ingressSingleLouOperands(68) indicates that ingress TCAM space is + allocated for LOUs with single operands. + + ingressLouL4SourcePort(69) indicates that ingress TCAM space is + allocated for LOUs with L4 source port in comparison. + + ingressLouL4DstPort(70) indicates that ingress TCAM space is + allocated for LOUs with L4 destination port in comparison. + + ingressLouL3PacketLength(71) indicates that ingress TCAM space is + allocated for LOUs with L3 Length in comparison. + + ingressLouL3Ttl(72) indicates that ingress TCAM space is allocated + for LOUs with L3 TTL in comparison. + + ingressLouL2Ttl(73) indicates that ingress TCAM space is allocated + for LOUs with L2 TTL in comparison. + + ingressTcpFlags(74) indicates that ingress TCAM space is allocated + for TCP Flags. + + egressTcam(75) indicates that egress TCAM resource utilization. + + egressIpv6Tcam(76) indicates that egress TCAM space is allocated + for IPv6 compression. + + egressLou(77)indicates that egress TCAM space is allocated for + LOUs (Logical Operation Unit). + + egressBothLouOperands(78) indicates that egress TCAM space is + allocated for LOUs with both operands. + + egressSingleLouOperands(79) indicates that egress TCAM space is + allocated for LOUs with single operands. + + egressLouL4SourcePort(80) indicates that egress TCAM space is + allocated for LOUs with L4 source port in comparison. + + egressLouL4DstPort(81) indicates that egress TCAM space is + allocated for LOUs with L4 destination port in comparison. + + egressLouL3PacketLength(82) indicates that egress TCAM space is + allocated for LOUs with L3 Length in comparison. + + egressLouL3Ttl(83) indicates that egress TCAM space is allocated + for the LOUs with L3 TTL in comparison. + + egressLouL2Ttl(84) indicates that egress TCAM space is allocated + for LOUs with L2 TTL in comparison. + + egressTcpFlags(85) indicates that egress TCAM space is allocated + for TCP Flags. + + l4OpLabelTcam2(86) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 2. + + l4OpLabelTcam3(87) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 3. + + l4OpLabelTcam4(88) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 4. + + l4OpLabelTcam5(89) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 5. + + l4OpLabelTcam6(90) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 6. + + l4OpLabelTcam7(91) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 7. + + l4OpLabelTcam8(92) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 8. + + l4OpLabelTcam9(93) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 9. + + l4OpLabelTcam10(94) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 10. + + l4OpLabelTcam11(95) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 11. + + l4OpLabelTcam12(96) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 12. + + l4OpLabelTcam13(97) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 13. + + l4OpLabelTcam14(98) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 14. + + l4OpLabelTcam15(99) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 15. + + l4OpLabelTcam16(100) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 16. + + l4OpLabelTcam17(101) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 17. + + l4OpLabelTcam18(102) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 18. + + l4OpLabelTcam19(103) indicates that TCAM space is allocated for + labels using any L4 operator resources like LOUs or TCP Flags + for TCAM 19. + + ingressPacl(104) indicates that ingress TCAM space is allocated + for PACL. + + ingressVacl(105) indicates that ingress TCAM space is allocated + for VACL. + + ingressRacl(106) indicates that ingress TCAM space is allocated + for RACL. + + ingressRbacl(107) indicates that ingress TCAM space is allocated + for RBACL. + + ingressNbm(108) indicates that ingress TCAM space is allocated + for NBM. + + ingressL2Qos(109) indicates that ingress TCAM space is allocated + for L2 QoS. + + ingressL3VlanQos(110) indicates that ingress TCAM space is allocated + for L3/VLAN QOS. + + ingressSup(111) indicates that ingress TCAM space is allocated for + SUP. + + ingressL2SpanAcl(112) indicates that ingress TCAM space is allocated + for L2 SPAN ACL. + + ingressL3VlanSpanAcl(113) indicates that ingress TCAM space is + allocated for L3/VLAN SPAN ACL. + + ingressFstat(114) indicates that ingress TCAM space is allocated + for FSTAT. + + ingressLatency(115) indicates that ingress TCAM space is allocated + for LATENCY. + + span(116) indicates that TCAM space is allocated for SPAN. + + nat(117) indicates that TCAM space is allocated for NAT. + + egressVacl(118) indicates that egress TCAM space is allocated + for VACL. + + egressRacl(119) indicates that egress TCAM space is allocated + for RACL. + + egressRbacl(120) indicates that egress TCAM space is allocated + for RBACL. + + egressSup(121) indicates that egress TCAM space is allocated for + SUP. + + egressL2Qos(122) indicates that egress TCAM space is allocated + for L2 QoS. + + egressL3VlanQos(123) indicates that egress TCAM space is allocated + for L3/VLAN QoS. + + netflowAnalyticsFilterTcam(124) indicates that TCAM space is + allocated for Netflow/Analytics Filter. + + ingressNetflowL3(125) indicates that ingress TCAM space is allocated + for L3 Netflow. + + ingressNetflowL2(126) indicates that ingress TCAM space is allocated + for L2 Netflow. + + featureVxLanOam(127) indicates that TCAM space is allocated for + Feature VxLAN OAM. + + featureBfd(128) indicates that TCAM space is allocated for Feature + BFD. + + featureDhcpSnoop(129) indicates that TCAM space is allocated for + Feature DHCP SNOOP. + + ingressRedirect(130) indicates that TCAM space is allocated for + ingress REDIRECT. + + featureDhcpV6Relay(131) indicates that TCAM space is allocated for + Feature DHCPv6 RELAY. + + featureArpSnoop(132) indicates that TCAM space is allocated for + Feature ARP SNOOP. + + featureDhcpSnoopFhs(133) indicates that TCAM space is allocated for + Feature DHCP SNOOP FHS. + + featureDhcpVaclFhs(134) indicates that TCAM space is allocated for + Feature DHCP VACL FHS. + + featureDhcpSisf(135) indicates that TCAM space is allocated for + Feature DHCP SISF. + + egressSystem(136) indicates that egress TCAM space is allocated for + System. + + rplusEgressSystem(137) indicates that TCAM space is allocated for + RPLUS Egress System. + + supSystem(138) indicates that TCAM space is allocated for SUP System. + + rplusSupSystem(139) indicates that TCAM space is allocated for RPLUS + SUP System. + + fmSupSystem(140) indicates that TCAM space is allocated for FM SUP + System. + + supCopp(141) indicates that TCAM space is allocated for SUP COPP. + + rplusSupCopp(142) indicates that TCAM space is allocated for RPLUS + SUP COPP. + + supCoppReasonCode(143) indicates that TCAM space is allocated for + SUP COPP Reason Code. + + ingressIpv4Pacl(144) indicates that ingress TCAM space is allocated + for IPv4 PACL. + + ingressIpv6Pacl(145) indicates that ingress TCAM space is allocated + for IPv6 PACL. + + ingressMacPacl(146) indicates that ingress TCAM space is allocated + for MAC PACL. + + ingressFexIpv4Pacl(147) indicates that ingress TCAM space is + allocated for Fex IPv4 PACL. + + ingressFexIpv6Pacl(148) indicates that ingress TCAM space is + allocated for Ingress Fex IPv6 PACL. + + ingressFexMacPacl(149) indicates that ingress TCAM space is + allocated for Ingress Fex MAC PACL. + + ingressIpv4PortQos(150) indicates that ingress TCAM space is + allocated for IPv4 Port QoS. + + ingressIpv4PortQosLite(151) indicates that ingress TCAM space is + allocated for IPv4 Port QoS (Lite). + + ingressIpv6PortQos(152) indicates that ingress TCAM space is + allocated for IPv6 Port QoS. + + ingressMacPortQos(153) indicates that ingress TCAM space is + allocated for MAC Port QoS. + + ingressIpv4FexPortQos(154) indicates that ingress TCAM space is + allocated for IPv4 FEX Port QoS. + + ingressIpv4FexPortQosLite(155) indicates that ingress TCAM space + is allocated for IPv4 FEX Port QoS (Lite). + + ingressIpv6FexPortQos(156) indicates that ingress TCAM space is + allocated for IPv6 FEX Port QoS. + + ingressMacFexPortQos(157) indicates that ingress TCAM space is + allocated for MAC FEX Port QoS. + + ingressIpv4Vacl(158) indicates that ingress TCAM space is allocated + for IPv4 VACL. + + ingressIpv6Vacl(159) indicates that ingress TCAM space is allocated + for IPv6 VACL. + + ingressMacVacl(160) indicates that ingress TCAM space is allocated + for MAC VACL. + + ingressIpv4VlanQos(161) indicates that ingress TCAM space is + allocated for IPv4 VLAN QoS. + + ingressIpv4VlanQosLite(162) indicates that ingress TCAM space is + allocated for IPv4 VLAN QoS (Lite). + + ingressIpv6VlanQos(163) indicates that ingress TCAM space is + allocated for IPv6 VLAN QoS. + + ingressMacVlanQos(164) indicates that ingress TCAM space is allocated + for MAC VLAN QoS. + + ingressIpv4Racl(165) indicates that ingress TCAM space is allocated + for IPv4 RACL. + + ingressIpv6Racl(166) indicates that ingress TCAM space is allocated + for IPv6 RACL. + + ingressIpv4L3Qos(167) indicates that ingress TCAM space is allocated + for IPv4 L3 QoS. + + ingressIPv4L3QosLite(168) indicates that ingress TCAM space is + allocated for IPv4 L3 QoS (Lite). + + ingressIPv6L3Qos(169) indicates that ingress TCAM space is allocated + for IPv6 L3 QoS. + + ingressMacL3Qos(170) indicates that ingress TCAM space is allocated + for MAC L3 QoS. + + ingressFlowCounters(171) indicates that TCAM space is allocated for + ingress Flow Counters. + + ingressSviCounters(172) indicates that TCAM space is allocated for + Ingress SVI Counters. + + egressIpv4Vacl(173) indicates that egress TCAM space is allocated + for IPv4 VACL. + + egressIpv6Vacl(174) indicates that egress TCAM space is allocated + for IPv6 VACL. + + egressMacVacl(175) indicates that egress TCAM space is allocated + for MAC VACL. + + egressIpv4Qos(176) indicates that egress TCAM space is allocated + for IPv4 QoS. + + egressIpv4QosLite(177) indicates that egress TCAM space is allocated + for IPv4 QoS Lite. + + egressIpv6Qos(178) indicates that egress TCAM space is allocated for + IPv6 QoS. + + egressMacQos(179) indicates that egress TCAM space is allocated for + MAC QoS. + + rplusIngressEgressIpv4Qos(180) indicates that TCAM space is allocated + for RPLUS Ingress/Egress IPv4 QoS. + + redirect(181) indicates that TCAM space is allocated for Redirect. + + rplusIngressEgressIpv4QosLite(182) indicates that TCAM space is + allocated for RPLUS Ingress/Egress IPv4 QoS Lite. + + rplusIngressEgressIpv6Qos(183) indicates that TCAM space is allocated + for Ingress/Egress IPv6 QoS. + + rplusIngressEgressMacQos(184) indicates that TCAM space is allocated + for Ingress/Egress MAC QoS. + + egressIpv4Racl(185) indicates that egress TCAM space is allocated for + IPv4 RACL. + + egressIpv6Racl(186) indicates that egress TCAM space is allocated for + IPv6 RACL. + + egressFlowCounters(187) indicates that TCAM space is allocated for + Egress Flow Counters. + + ingressNsIpv4PortQos(188) indicates that ingress TCAM space is + allocated for NS IPv4 Port QoS. + + ingressNsIpv6PortQos(189) indicates that ingress TCAM space is + allocated for NS IPv6 Port QoS. + + ingressNsMTCAM_MIB.myacPortQos(190) indicates that ingress TCAM space is + allocated for NS MAC Port QoS. + + ingressNsIpv4VlanQos(191) indicates that ingress TCAM space is + allocated for NS IPv4 VLAN QoS. + + ingressNsIpv6VlanQos(192) indicates that ingress TCAM space is + allocated for NS IPv6 VLAN QoS. + + ingressNsMacVlanQos(193) indicates that ingress TCAM space is + allocated for NS MAC VLAN QoS. + + ingressNsIpv4L3Qos(194) indicates that ingress TCAM space is + allocated for NS IPv4 L3 QoS. + + ingressNsIpv6L3Qos(195) indicates that ingress TCAM space is + allocated for NS IPv6 L3 QoS. + + vpcConvergence(196) indicates that TCAM space is allocated for + VPC Convergence. + + ipsgSmacIpBindingTable(197) indicates that TCAM space is + allocated for IPSG SMAC-IP binding table. + + openflowAcl(198) indicates that TCAM space is allocated for + OPENFLOW ACL. + + openflowIpv6Acl(199) indicates that TCAM space is allocated + for OPENFLOW IPV6 ACL. + + ingressEtherAcl(200) indicates that ingress TCAM space is + allocated for Ether ACL. + + mplsFeature(201) indicates that TCAM space is allocated for + MPLS feature. + + ingressIpv4Qos(202) indicates that ingress TCAM space is + allocated for IPv4 QoS. + + ingressIpv6Qos(203) indicates that ingress TCAM space is + allocated for IPv6 QoS. + + ipv6Sup(204) indicates that TCAM space is allocated for + IPV6 SUP. + + ingressIpv4Pbr(205) indicates that ingress TCAM space is + allocated for IPv4 PBR. + + ingressIpv6Pbr(206) indicates that ingress TCAM space is + allocated for IPv6 PBR. + + ingressIpv4PaclDoubleWide(207) indicates that ingress TCAM + space is allocated for IPv4 PACL DoubleWide. + + arpAcl(208) indicates that TCAM space is allocated for ARP ACL. + + sflowNorthstarAcl(209) indicates that TCAM space is allocated for + sFlow Northstar ACL. + + mcastBidir(210) indicates that TCAM space is allocated for mcast + bidir. + + redirectTunnel(211) indicates that TCAM space is allocated for + Redirect TUNNEL. + + ingressFcoeCounters(212) indicates that TCAM space is allocated + for Ingress FCoE Counters. + + egressFcoeCounters(213) indicates that egress TCAM space is + allocated for Egress FCoE Counters. + + spanSflowCombined(214) indicates that TCAM space is allocated for + SPAN SFLOW combined. + + mcastPerformance(215) indicates that TCAM space is allocated for + mcast performance. + + fhs(216) indicates that TCAM space is allocated for FHS. + + openflowLiteAcl(217) indicates that TCAM space is allocated for + OPENFLOW LITE ACL. + + ipv6DestCompression(218) indicates that TCAM space is allocated + for IPv6 Dest Compression. + + ingressIpv4RaclLite(219) indicates that TCAM space is allocated + for Ingress IPv4 RACL Lite. + + ipv6SrcCompression(220) indicates that TCAM space is allocated for + IPv6 Src Compression. + + ipv4RaclSpanUdf(221) indicates that TCAM space is allocated for + IPV4 RACL SPAN UDF. + + ingressIpv4PortQosIntraTcamLite(222) indicates that TCAM space is + allocated for Ingress IPv4 Port QoS (Intra-TCAM Lite). + + ingressIpv4L3QosIntraTcamLite(223) indicates that TCAM space is + allocated for Ingress IPv4 L3 QoS (Intra-TCAM Lite). + + ingressIpv4VlanQosIntraTcamLite(224) indicates that TCAM space is + allocated for Ingress IPv4 VLAN QoS (Intra-TCAM Lite). + + ipv4PaclSpanUdf(225) indicates that TCAM space is allocated for IPV4 + PACL SPAN UDF. + + coppSystem(226) indicates that TCAM space is allocated for COPP + SYSTEM. + + ingressIpv4PaclLite(227) indicates that TCAM space is allocated for + ingress IPv4 PACL lite. + + ingressIpv4VaclLite(228) indicates that TCAM space is allocated for + ingress IPv4 VACL lite. + + vxLanXConnect(229) indicates that TCAM space is allocated for VxLAN XConnect. + + dot1X(230) indicates that TCAM space is allocated for DOT1X. + + dot1XMultiAuth(231) indicates that TCAM space is allocated for DOT1X Multi + Auth. + + ingressPaclAll(232) indicates that TCAM space is allocated for + Ingress PACL ALL. + + ingressRaclAll(233) indicates that TCAM space is allocated for + Ingress RACL ALL. + + ingressVaclAll(234) indicates that TCAM space is allocated for + Ingress VACL ALL. + + ingressMacPqos(235) indicates that TCAM space is allocated for + Ingress MAC PQOS. + + ingressIpv4Pqos(236) indicates that TCAM space is allocated for + Ingress IPV4 PQOS. + + ingressIpv6Pqos(237) indicates that TCAM space is allocated for + Ingress IPV6 PQOS. + + ingressPqos(238) indicates that TCAM space is allocated for Ingress PQOS. + + ingressMacVqos(239) indicates that TCAM space is allocated for + Ingress MAC VQOS. + + ingressIpv4Vqos(240) indicates that TCAM space is allocated for + Ingress IPV4 VQOS. + + ingressIpv6Vqos(241) indicates that TCAM space is allocated for + Ingress IPV6 VQOS. + + ingressVqosAll(242) indicates that TCAM space is allocated for + Ingress VQOS ALL. + + ingressIpv4L3qos(243) indicates that TCAM space is allocated for + Ingress IPV4 L3QOS. + + ingressIpv6L3qos(244) indicates that TCAM space is allocated for + Ingress IPV6 L3QOS. + + ingressL3qosAll(245) indicates that TCAM space is allocated for + Ingress L3QOS ALL. + + ingressCopp(246) indicates that TCAM space is allocated for Ingress COPP. + + ingressMacSpan(247) indicates that TCAM space is allocated for + Ingress MAC SPAN. + + ingressIpv4Span(248) indicates that TCAM space is allocated for + Ingress IPV4 SPAN. + + ingressSpan(249) indicates that TCAM space is allocated for Ingress SPAN. + + ingressSpanAll(250) indicates that TCAM space is allocated for + Ingress SPAN ALL. + + egressRaclAll(251) indicates that TCAM space is allocated for + Egress RACL ALL. + + egressVaclAll(252) indicates that TCAM space is allocated for + Egress VACL ALL. + + egressMacPortQos(253) indicates that TCAM space is allocated for + Egress MAC Port QOS. + + egressIpv4PortQos(254) indicates that TCAM space is allocated for + Egress IPV4 Port QOS. + + egressIv6PortQos(255) indicates that TCAM space is allocated for + Egress IPv6 Port QOS. + + egressPortQos(256) indicates that TCAM space is allocated for + Egress Port QOS. + + egressMacVlanQos(257) indicates that TCAM space is allocated for + Egress MAC VLAN QOS. + + egressIpv4VlanQos(258) indicates that TCAM space is allocated for + Egress IPV4 VLAN QOS. + + egressIpv6VlanQos(259) indicates that TCAM space is allocated for + Egress IPV6 VLAN QOS. + + egressVlanQos(260) indicates that TCAM space is allocated for + Egress VLAN QOS. + + egressIpv4L3Qos(261) indicates that TCAM space is allocated for + Egress IPV4 L3 QOS. + + egressIpv6L3Qos(262) indicates that TCAM space is allocated for + Egress IPV6 L3 QOS. + + egressL3QosAll(263) indicates that TCAM space is allocated for + Egress L3 QOS ALL. + + egressMacSpan(264) indicates that TCAM space is allocated for + Egress MAC SPAN. + + egressIpv4Span(265) indicates that TCAM space is allocated for + Egress IPV4 SPAN. + + egressIpv6Span(266) indicates that TCAM space is allocated for + Egress IPV6 SPAN. + + egressSpanAll(267) indicates that TCAM space is allocated for + Egress SPAN ALL. + + dhcp(268) indicates that TCAM space is allocated for DHCP. + + labelLblA(269) indicates that TCAM space is allocated for + Label LBL A, Ingress-Physical interface-PACL,PQOS. + + labelLblB(270) indicates that TCAM space is allocated for + Label LBL B, Ingress-Logical interface-PACL,PQOS. + + labelLblD(271) indicates that TCAM space is allocated for + Label LBL D, Ingress-Physical interface-RACL,L3QOS. + + labelLblE(272) indicates that TCAM space is allocated for + Label LBL E, Ingress-Logical interface-RACL,L3QOS. + + labelLblF(273) indicates that TCAM space is allocated for + Label LBL F, Egress-Physical interface-RACL,L3QOS. + + labelLblG(274) indicates that TCAM space is allocated for + Label LBL G, Egress-Logical interface-RACL,L3QOS. + + labelLblH(275) indicates that TCAM space is allocated for + Label LBL H, Ingress-VLAN-VACL,VQOS. + + labelLblI(276) indicates that TCAM space is allocated for + Label LBL I, Egress-VLAN-VACL,VQOS. + + labelLblK(277) indicates that TCAM space is allocated for + Label LBL K, Ingress-All interface-DHCP. + + ingressSupAll(278) indicates that TCAM space is allocated for + Ingress SUP ALL. + + egressSupAll(279) indicates that TCAM space is allocated for + Egress SUP ALL. + + ingressVlanSpan(280) indicates that TCAM space is allocated for + Ingress Vlan SPAN. + + ingressNetflow(281) indicates that TCAM space is allocated for + Ingress Netflow. + + ingressCntAcl(282) indicates that TCAM space is allocated for + Ingress CNTACL. + + egressCntAcl(283) indicates that TCAM space is allocated for + Egress CNTACL. + + ingressHwTelemetry(284) indicates that TCAM space is allocated for + Ingress HW-TELEMETRY. + + labelLblAv1(285) indicates that TCAM space is allocated for Label LBL A. + + labelLblBv1(286) indicates that TCAM space is allocated for Label LBL B. + + labelLblCv1(287) indicates that TCAM space is allocated for Label LBL C. + + labelLblDv1(288) indicates that TCAM space is allocated for Label LBL D. + + labelLblEv1(289) indicates that TCAM space is allocated for Label LBL E. + + labelLblFv1(290) indicates that TCAM space is allocated for Label LBL F. + + labelLblGv1(291) indicates that TCAM space is allocated for Label LBL G. + + labelLblHv1(292) indicates that TCAM space is allocated for Label LBL H. + + labelLblIv1(293) indicates that TCAM space is allocated for Label LBL I. + + labelLblJv1(294) indicates that TCAM space is allocated for Label LBL J. + + labelLblKv1(295) indicates that TCAM space is allocated for Label LBL K. + + labelLblLv1(296) indicates that TCAM space is allocated for Label LBL L. + + labelLblMv1(297) indicates that TCAM space is allocated for Label LBL M. + + labelLblNv1(298) indicates that TCAM space is allocated for Label LBL N. + + labelLblOv1(299) indicates that TCAM space is allocated for Label LBL O. + + labelLblPv1(300) indicates that TCAM space is allocated for Label LBL P. + + labelLblQv1(301) indicates that TCAM space is allocated for Label LBL Q. + + labelLblRv1(302) indicates that TCAM space is allocated for Label LBL R. + + ingressNetflowAnalytics(303) indicates that TCAM space is allocated for + Ingress Netflow/Analytics. + + ingressNatOutside(304) indicates that TCAM space is allocated for Ingress + NAT OUTSIDE. + + ingressNatInside(305) indicates that TCAM space is allocated for Ingress + NAT INSIDE. + + ingressL2L3QosAll(306) indicates that TCAM space is allocated for + Ingress L2 L3 QOS ALL. + + natRewriteTable(307) indicates that TCAM space is allocated for NAT + Rewrite Table. + + tcpAwareNat(308) indicates that TCAM space is allocated for TCP + Aware NAT." + + ::= { cseTcamUsageEntry 1 } + +cseTcamResourceDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The short description of the resource type." + ::= { cseTcamUsageEntry 2 } + +cseTcamResourceUsed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of TCAM resource has been used up for this resource + type." + ::= { cseTcamUsageEntry 3 } + +cseTcamResourceTotal OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of TCAM resource is allocated for this + resource type." + ::= { cseTcamUsageEntry 4 } + + +-- cseMet group +-- + +-- +-- The cseMetUsageTable + +cseMetUsageTable OBJECT-TYPE + SYNTAX SEQUENCE OF CseMetUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the resource usage of MET (Multicast + Expansion Table) in the device." + ::= { cseMet 1 } + +cseMetUsageEntry OBJECT-TYPE + SYNTAX CseMetUsageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each row contains the total number of entries in each MET, + the number of free entries in unallocated as well as + allocated space of the MET. Each row represents MET data + maintained by each module (identified by its entPhysicalIndex) + which is capable of this feature." + INDEX { + entPhysicalIndex, + cseMetIndex + } + ::= { cseMetUsageTable 1 } + +CseMetUsageEntry ::= SEQUENCE { + cseMetIndex Unsigned32, + cseMetTotalEntries Unsigned32, + cseMetUnallocatedSpcFreeEntries Unsigned32, + cseMetAllocatedSpcFreeEntries Unsigned32 +} + +cseMetIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A value uniquely identifies a MET in a module." + ::= { cseMetUsageEntry 1 } + +cseMetTotalEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of entries in this MET." + ::= { cseMetUsageEntry 2 } + +cseMetUnallocatedSpcFreeEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of free entries reside in unallocated + space of this MET." + ::= { cseMetUsageEntry 3 } + +cseMetAllocatedSpcFreeEntries OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of free entries reside in allocated + space of this MET." + ::= { cseMetUsageEntry 4 } + + +-- Notifications + +cseMIBNotifications OBJECT IDENTIFIER + ::= { ciscoSwitchEngineMIB 2 } + +-- no notifications defined +-- +-- Conformance + +cseMIBConformance OBJECT IDENTIFIER + ::= { ciscoSwitchEngineMIB 3 } + +cseMIBCompliances OBJECT IDENTIFIER + ::= { cseMIBConformance 1 } + +cseMIBGroups OBJECT IDENTIFIER + ::= { cseMIBConformance 2 } + + +-- compliance statements + +cseMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH_ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + ::= { cseMIBCompliances 1 } + +cseMIBCompliance2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + ::= { cseMIBCompliances 2 } + +cseMIBCompliance3 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + ::= { cseMIBCompliances 3 } + +cseMIBCompliance4 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + + GROUP cseNDEMandatoryGroup + DESCRIPTION + "This group is mandatory for those switched which + support Netflow Data Export" + + GROUP cseNDESingleFilterGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is single." + + GROUP cseNDEMultipleFiltersGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is multiple." + + GROUP cseProtocolFilterGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseStatisticsGroup2 + DESCRIPTION + "Implementation of this group is optional." + + OBJECT cseNetflowLSFilterSelection + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter." + + OBJECT cseNetflowLSFilterStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter" + ::= { cseMIBCompliances 4 } + +cseMIBCompliance5 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroupRev1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + + GROUP cseNDEMandatoryGroup + DESCRIPTION + "This group is mandatory for those switched which + support Netflow Data Export" + + GROUP cseNDESingleFilterGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is single." + + GROUP cseNDEMultipleFiltersGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is multiple." + + GROUP cseProtocolFilterGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseStatisticsGroup2 + DESCRIPTION + "Implementation of this group is optional." + + OBJECT cseNetflowLSFilterSelection + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter." + + OBJECT cseNetflowLSFilterStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter" + ::= { cseMIBCompliances 5 } + +cseMIBCompliance6 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroupRev1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + + GROUP cseNDEMandatoryGroup + DESCRIPTION + "This group is mandatory for those switched which + support Netflow Data Export" + + GROUP cseNDESingleFilterGroupRev1 + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is single." + + GROUP cseNDEMultipleFiltersGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is multiple." + + GROUP cseProtocolFilterGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseStatisticsGroup2 + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseFlowMgmtExtGroup2 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + OBJECT cseNetflowLSFilterSelection + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter." + + OBJECT cseNetflowLSFilterStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter" + ::= { cseMIBCompliances 6 } + +cseMIBCompliance7 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroupRev1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + + GROUP cseNDEMandatoryGroup + DESCRIPTION + "This group is mandatory for those switched which + support Netflow Data Export" + + GROUP cseNDESingleFilterGroupRev1 + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is single." + + GROUP cseNDEMultipleFiltersGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is multiple." + + GROUP cseProtocolFilterGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseStatisticsGroup2 + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseFlowMgmtExtGroup2 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastRtrMgmtGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseFlowMcastMgmtGroup2 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + OBJECT cseNetflowLSFilterSelection + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter." + + OBJECT cseNetflowLSFilterStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter" + ::= { cseMIBCompliances 7 } + +cseMIBCompliance8 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for + the CISCO-SWITCH-ENGINE-MIB MIB." + MODULE -- this module + MANDATORY-GROUPS { cseStatisticsGroup } + + GROUP cseRouterGroup + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseVlanStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + can provide per-vlan statistics." + + GROUP cseFlowMgmtGroupRev1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastMgmtGroup1 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseUcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP/IPX unicast flow cache purging in the system." + + GROUP cseMcastCachePurgeGroup + DESCRIPTION + "This group is mandatory only for those switches which + supports IP multicast flow cache purging in the system." + + GROUP cseFlowMgmtOperStatusGroup + DESCRIPTION + "This group is mandatory only for those switches which + support operating status on aging time for flows used + in L3 switching." + + GROUP cse4kVlanGroup + DESCRIPTION + "This group must be implemented by the devices which + support the range of VlanIndex between 1024 and 4095" + + GROUP cseNDEMandatoryGroup + DESCRIPTION + "This group is mandatory for those switched which + support Netflow Data Export" + + GROUP cseNDESingleFilterGroupRev1 + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is single." + + GROUP cseNDEMultipleFiltersGroup + DESCRIPTION + "This group is mandatory in agents for which the value of + cseNetflowLSFilterSupport is multiple." + + GROUP cseProtocolFilterGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseStatisticsGroup2 + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseFlowMgmtExtGroup2 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 switching in the system." + + GROUP cseFlowMcastRtrMgmtGroup + DESCRIPTION + "Implementation of this group is optional." + + GROUP cseFlowMcastMgmtGroup2 + DESCRIPTION + "This group is mandatory only for those switches which + support layer 3 IP multicast switching in the system." + + GROUP cseCacheStatisticsGroup + DESCRIPTION + "This group is mandatory only for those switches which + support switch engine statistics on flow cache entries + in the system." + + GROUP cseL3SwitchedPktsPerSecGroup + DESCRIPTION + "This group is mandatory only for those switches which + support switch engine statistics on total number of + packets switched per second in the system." + + GROUP cseStatisticsFlowGroup1 + DESCRIPTION + "This group is mandatory only for those switches which + support switch engine statistics on total number of + Ipv4 flow entries." + + OBJECT cseNetflowLSFilterSelection + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter." + + OBJECT cseNetflowLSFilterStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, for systems which + support just one include and one exclude filter" + ::= { cseMIBCompliances 8 } + +-- units of conformance + +cseStatisticsGroup OBJECT-GROUP + OBJECTS { + cseL2ForwardedLocalPkts, + cseL2ForwardedLocalOctets, + cseL2ForwardedTotalPkts, + cseL2NewAddressLearns, + cseL2AddrLearnFailures, + cseL2DstAddrLookupMisses, + cseL3SwitchedTotalPkts, + cseL3SwitchedTotalOctets, + cseL3CandidateFlowHits, + cseL3EstablishedFlowHits, + cseL3ActiveFlows, + cseL3FlowLearnFailures, + cseL3IntFlowInvalids, + cseL3ExtFlowInvalids, + cseL2HCOverflowForwardedLocalPkts, + cseL2HCForwardedLocalPkts, + cseL2HCOverflowForwardedTotalPkts, + cseL2HCForwardedTotalPkts, + cseL2HCOverflowIpPkts, + cseL2HCIpPkts, + cseL2HCOverflowIpxPkts, + cseL2HCIpxPkts, + cseL2HCOverflowAssignedProtoPkts, + cseL2HCAssignedProtoPkts, + cseL2HCOverflowOtherProtoPkts, + cseL2HCOtherProtoPkts + } + STATUS current + DESCRIPTION + "A collection of objects providing switch engine statistics." + ::= { cseMIBGroups 1 } + +cseStatisticsGroup2 OBJECT-GROUP + OBJECTS { + cseStatsFlowAged, + cseStatsFlowPurged, + cseStatsFlowParityFail, + cseCacheUtilization + } + STATUS current + DESCRIPTION + "A collection of objects providing switch engine statistics + on aged/purged flows, and the cache utilizations." + ::= { cseMIBGroups 2 } + +cseVlanStatisticsGroup OBJECT-GROUP + OBJECTS { + cseL3VlanInPkts, + cseL3VlanInOctets, + cseL3VlanOutPkts, + cseL3VlanOutOctets + } + STATUS current + DESCRIPTION + "A collection of objects providing per-vlan switch engine + statistics, if supported." + ::= { cseMIBGroups 3 } + +cseRouterGroup OBJECT-GROUP + OBJECTS { + cseRouterFlowMask, + cseRouterName, + cseRouterStatic, + cseStaticRouterOwner, + cseStaticRouterName, + cseStaticRouterType, + cseStaticRouterStatus, + cseRouterIpxFlowMask, + cseStaticIpxRouterOwner, + cseStaticIpxRouterName, + cseStaticIpxRouterStatus, + cseRouterMac, + cseRouterProtocol + } + STATUS current + DESCRIPTION + "A collection of objects providing information on routers which + are used to support layer 3 switching in the system." + ::= { cseMIBGroups 4 } + +cseFlowMgmtGroup OBJECT-GROUP + OBJECTS { + cseFlowEstablishedAgingTime, + cseFlowFastAgingTime, + cseFlowFastAgePktThreshold, + cseFlowIPXEstablishedAgingTime, + cseFlowMaxQueries, + cseFlowQueryMask, + cseFlowQueryTransport, + cseFlowQuerySource, + cseFlowQuerySourceMask, + cseFlowQueryDestination, + cseFlowQueryDestinationMask, + cseFlowQueryRouterIndex, + cseFlowQueryOwner, + cseFlowQueryResultingRows, + cseFlowQueryResultTotalPkts, + cseFlowQueryResultTotalOctets, + cseFlowQueryResultAvgDuration, + cseFlowQueryResultAvgIdle, + cseFlowQueryStatus, + cseFlowQueryCreateTime, + cseFlowDataSrcMac, + cseFlowDataDstMac, + cseFlowDataEncapType, + cseFlowDataSource, + cseFlowDataStaticFlow, + cseFlowDataDestination, + cseFlowDataDestVlan, + cseFlowDataIpQOS, + cseFlowDataIpQOSPolicy, + cseFlowDataWhenCreated, + cseFlowDataLastUsed, + cseFlowDataPkts, + cseFlowDataOctets, + cseFlowSwitchStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information for determining the + L3 flow switching performance in the switching engine. There may + be some platform specific limitations when performing a SET + on some of these objects. + + The following are valid for Catalyst 5000 platforms: + + - cseFlowEstablishedAgingTime has a default value of 256. + + - cseFlowFastAgePktThreshold can only be set to 1, 3, 7, 15, 31 + or 63 packets. If the packet threshold is not configured to one + of these values, it will be adjusted to the closest value. + + - cseFlowFastAgingTime can be set to only values that are + multiples of 8 in the range (0..128). + If it is set to a value that is not + multiple of 8, then the closest value that is a multiple of 8 + will take effect. The default value for fast aging time is 32 + seconds. (i.e. less than cseFlowFastAgePktThreshold number of + packets were switched within 32 seconds after the an L3 + flow entry was established). + + - cseFlowIPXEstablishedAgingTime has a default value of 256. + + cseFlowMgmtGroup object is superseded by cseFlowMgmtGroupRev1." + ::= { cseMIBGroups 5 } + +cseNetflowLSGroup OBJECT-GROUP + OBJECTS { + cseNetflowLSExportHost, + cseNetflowLSExportTransportNumber, + cseNetflowLSExportStatus, + cseNetflowLSExportDataSource, + cseNetflowLSExportDataSourceMask, + cseNetflowLSExportDataDest, + cseNetflowLSExportDataDestMask, + cseNetflowLSExportDataProtocol, + cseNetflowLSExportDataFilterSelection, + cseNetflowLSExportNDEVersionNumber + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information on the Netflow LAN + switching Data Export feature, if supported. + + cseNetflowLSGroup object is superseded by cseNDESingleFilterGroupRev1." + ::= { cseMIBGroups 6 } + +cseProtocolFilterGroup OBJECT-GROUP + OBJECTS { + cseProtocolFilterPortAdminStatus, + cseProtocolFilterPortOperStatus, + cseL2IpPkts, + cseL2IpxPkts, + cseL2AssignedProtoPkts, + cseL2OtherProtoPkts + } + STATUS current + DESCRIPTION + "A collection of objects providing information on the Protocol + filter feature, if supported." + ::= { cseMIBGroups 7 } + +cseFlowMcastMgmtGroup OBJECT-GROUP + OBJECTS { + cseFlowMcastMaxQueries, + cseFlowMcastQueryMask, + cseFlowMcastQuerySrc, + cseFlowMcastQueryGrp, + cseFlowMcastQuerySrcVlan, + cseFlowMcastQueryRtrIndex, + cseFlowMcastQuerySkipNFlows, + cseFlowMcastQueryOwner, + cseFlowMcastQueryTotalFlows, + cseFlowMcastQueryRows, + cseFlowMcastQueryStatus, + cseFlowMcastQueryCreateTime, + cseFlowMcastResultSrc, + cseFlowMcastResultGrp, + cseFlowMcastResultSrcVlan, + cseFlowMcastResultRtrIp, + cseFlowMcastResultRtrMac, + cseFlowMcastResultCreatedTS, + cseFlowMcastResultLastUsedTS, + cseFlowMcastResultPkts, + cseFlowMcastResultOctets, + cseFlowMcastResultDstVlans, + cseFlowMcastSwitchStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects for querying IP multicast flows + stored in hardware switching cache. + + cseFlowMcastMgmtGroup object is superseded by cseFlowMcastMgmtGroup1." + ::= { cseMIBGroups 8 } + +cseUcastCachePurgeGroup OBJECT-GROUP + OBJECTS { + cseUcastCacheFlowType, + cseUcastCacheTransport, + cseUcastCacheDest, + cseUcastCacheDestMask, + cseUcastCacheSource, + cseUcastCacheSrcMask, + cseUcastCacheRtrIp, + cseUcastCacheOwner, + cseUcastCacheStatus, + cseUcastCacheResult + } + STATUS current + DESCRIPTION + "A collection of objects providing IP/IPX unicast flow cache + purging function." + ::= { cseMIBGroups 9 } + +cseMcastCachePurgeGroup OBJECT-GROUP + OBJECTS { + cseMcastCacheFlowType, + cseMcastCacheGrp, + cseMcastCacheSrc, + cseMcastCacheRtrIp, + cseMcastCacheOwner, + cseMcastCacheStatus, + cseMcastCacheResult + } + STATUS current + DESCRIPTION + "A collection of objects providing IP multicast flow cache purge + function." + ::= { cseMIBGroups 10 } + +cseFlowMgmtOperStatusGroup OBJECT-GROUP + OBJECTS { + cseFlowOperEstablishedAgingTime, + cseFlowOperFastAgingTime, + cseFlowOperFastAgePktThreshold, + cseFlowOperIPXAgingTime + } + STATUS current + DESCRIPTION + "A collection of objects providing operating status information + on aging time for flows used in L3 switching." + ::= { cseMIBGroups 11 } + +cse4kVlanGroup OBJECT-GROUP + OBJECTS { + cseFlowMcastResultDstVlans2k, + cseFlowMcastResultDstVlans3k, + cseFlowMcastResultDstVlans4k + } + STATUS current + DESCRIPTION + "A collection of objects providing information + for VLANS with VlanIndex from 1024 to 4095." + ::= { cseMIBGroups 12 } + +cseNDEMandatoryGroup OBJECT-GROUP + OBJECTS { + cseNetflowLSFilterSupport, + cseNetflowLSExportStatus, + cseNetflowLSExportNDEVersionNumber + } + STATUS current + DESCRIPTION + "A collection of objects providing information on the type + of filter support, status and the version of NDE used." + ::= { cseMIBGroups 13 } + +cseNDESingleFilterGroup OBJECT-GROUP + OBJECTS { + cseNetflowLSExportHost, + cseNetflowLSExportTransportNumber, + cseNetflowLSExportDataSource, + cseNetflowLSExportDataSourceMask, + cseNetflowLSExportDataDest, + cseNetflowLSExportDataDestMask, + cseNetflowLSExportDataProtocol, + cseNetflowLSExportDataFilterSelection + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information on the Netflow LAN + switching Data Export feature, with a single host and a + single filter support. + + cseNDESingleFilterGroup object is superseded by cseNDESingleFilterGroupRev1." + ::= { cseMIBGroups 14 } + +cseNDEMultipleFiltersGroup OBJECT-GROUP + OBJECTS { + cseNetflowLSFilterDataSource, + cseNetflowLSFilterDataSourceMask, + cseNetflowLSFilterDataDest, + cseNetflowLSFilterDataDestMask, + cseNetflowLSFilterDataProtocol, + cseNetflowLSFilterSelection, + cseNetflowLSFilterStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing information on the Netflow LAN + switching Data Export feature, with multiple filter support." + ::= { cseMIBGroups 15 } + +cseFlowMgmtGroupRev1 OBJECT-GROUP + OBJECTS { + cseFlowEstablishedAgingTime, + cseFlowFastAgingTime, + cseFlowFastAgePktThreshold, + cseFlowIPXEstablishedAgingTime, + cseFlowMaxQueries, + cseFlowQueryMask, + cseFlowQueryTransport, + cseFlowQuerySource, + cseFlowQuerySourceMask, + cseFlowQueryDestination, + cseFlowQueryDestinationMask, + cseFlowQueryRouterIndex, + cseFlowQueryOwner, + cseFlowQueryResultingRows, + cseFlowQueryResultTotalPkts, + cseFlowQueryResultTotalOctets, + cseFlowQueryResultAvgDuration, + cseFlowQueryResultAvgIdle, + cseFlowQueryStatus, + cseFlowQueryCreateTime, + cseFlowQueryTotalFlows, + cseFlowDataSrcMac, + cseFlowDataDstMac, + cseFlowDataEncapType, + cseFlowDataSource, + cseFlowDataStaticFlow, + cseFlowDataDestination, + cseFlowDataDestVlan, + cseFlowDataIpQOS, + cseFlowDataIpQOSPolicy, + cseFlowDataWhenCreated, + cseFlowDataLastUsed, + cseFlowDataPkts, + cseFlowDataOctets, + cseFlowSwitchStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing information for determining the + L3 flow switching performance in the switching engine. There may + be some platform specific limitations when performing a SET + on some of these objects. + + The following are valid for Catalyst 5000 platforms: + + - cseFlowEstablishedAgingTime has a default value of 256. + + - cseFlowFastAgePktThreshold can only be set to 1, 3, 7, 15, 31 + or 63 packets. If the packet threshold is not configured to one + of these values, it will be adjusted to the closest value. + + - cseFlowFastAgingTime can be set to only values that are + multiples of 8 in the range (0..128). + If it is set to a value that is not + multiple of 8, then the closest value that is a multiple of 8 + will take effect. The default value for fast aging time is 32 + seconds. (i.e. less than cseFlowFastAgePktThreshold number of + packets were switched within 32 seconds after the an L3 + flow entry was established). + + - cseFlowIPXEstablishedAgingTime has a default value of 256." + ::= { cseMIBGroups 16 } + +cseL3ErrorsGroup OBJECT-GROUP + OBJECTS { + cseIpPlenErrors, + cseIpTooShortErrors, + cseIpCheckSumErrors, + cseIpxPlenErrors, + cseIpxTooShortErrors + } + STATUS current + DESCRIPTION + "A collection of objects providing the IP and IPX error + statistics." + ::= { cseMIBGroups 17 } + +cseBridgedFlowGroup OBJECT-GROUP + OBJECTS { cseFlowBridgedFlowStatsEnable } + STATUS current + DESCRIPTION + "A collection of objects control the reporting of intra-vlan + bridged flow statistics." + ::= { cseMIBGroups 18 } + +cseVlanStatisticsExtGroup OBJECT-GROUP + OBJECTS { + cseL3VlanInUnicastPkts, + cseL3VlanInUnicastOctets, + cseL3VlanOutUnicastPkts, + cseL3VlanOutUnicastOctets + } + STATUS current + DESCRIPTION + "A collection of objects providing additional per-vlan switch + engine statistics, if supported." + ::= { cseMIBGroups 19 } + +cseProtocolFilterExtGroup OBJECT-GROUP + OBJECTS { cseProtocolFilterEnable } + STATUS current + DESCRIPTION + "A collection of objects providing additional information on the + Protocol filter feature, if supported." + ::= { cseMIBGroups 20 } + +cseFlowMgmtExtGroup OBJECT-GROUP + OBJECTS { + cseFlowIPFlowMask, + cseFlowIPXFlowMask + } + STATUS current + DESCRIPTION + "A collection of objects providing additional information on the + L3 flow switching in the switching engine." + ::= { cseMIBGroups 21 } + +cseFlowMgmtExtGroup1 OBJECT-GROUP + OBJECTS { + cseFlowLongAgingTime, + cseFlowExcludeProtocol, + cseFlowExcludeStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing additional information on the + L3 flow switching in the switching engine." + ::= { cseMIBGroups 22 } + +cseNDEReportGroup OBJECT-GROUP + OBJECTS { cseNetFlowIfIndexEnable } + STATUS current + DESCRIPTION + "A collection of objects providing the configuration + on NDE ifIndex report feature." + ::= { cseMIBGroups 23 } + +cseStatisticsFlowGroup OBJECT-GROUP + OBJECTS { cseFlowTotalFlows } + STATUS current + DESCRIPTION + "A collection of object providing switch engine statistics + on total number of installed flows." + ::= { cseMIBGroups 24 } + +cseFlowMgmtExtGroup2 OBJECT-GROUP + OBJECTS { cseFlowQuerySkipNFlows } + STATUS current + DESCRIPTION + "A collection of objects providing additional information on the + L3 flow switching in the switching engine." + ::= { cseMIBGroups 25 } + +cseNDESingleFilterGroupRev1 OBJECT-GROUP + OBJECTS { + cseNetflowLSExportDataSource, + cseNetflowLSExportDataSourceMask, + cseNetflowLSExportDataDest, + cseNetflowLSExportDataDestMask, + cseNetflowLSExportDataProtocol, + cseNetflowLSExportDataFilterSelection + } + STATUS current + DESCRIPTION + "A collection of objects providing information on the Netflow LAN + switching Data Export feature, with a single filter support." + ::= { cseMIBGroups 26 } + +cseCefFibAdjacencyGroup OBJECT-GROUP + OBJECTS { + cseCefFibAddrType, + cseCefFibDestIp, + cseCefFibDestIpMask, + cseCefFibType, + cseCefAdjacencyAddrType, + cseCefAdjacencyNextHopIp, + cseCefAdjacencyNextHopMac, + cseCefAdjacencyNextHopIfIndex, + cseCefAdjacencyType, + cseCefAdjacencyPkts, + cseCefAdjacencyOctets + } + STATUS current + DESCRIPTION + "A collection of objects providing FIB and adjacency + information available in the device." + ::= { cseMIBGroups 27 } + +cseCefAdjacencyEncapGroup OBJECT-GROUP + OBJECTS { cseCefAdjacencyEncap } + STATUS current + DESCRIPTION + "A collection of object providing adjacency next hop + encapsulation information available in the device." + ::= { cseMIBGroups 28 } + +cseCefAdjacencyMTUGroup OBJECT-GROUP + OBJECTS { cseCefAdjacencyMTU } + STATUS current + DESCRIPTION + "A collection of object providing adjacency next hop + MTU information available in the device." + ::= { cseMIBGroups 29 } + +cseTcamUsageGroup OBJECT-GROUP + OBJECTS { + cseTcamResourceDescr, + cseTcamResourceUsed, + cseTcamResourceTotal + } + STATUS current + DESCRIPTION + "A collection of objects providing the resource usage + information on TCAM available in the device." + ::= { cseMIBGroups 30 } + +cseL3ErrorsLCGroup OBJECT-GROUP + OBJECTS { + cseLCIpPlenErrors, + cseLCIpTooShortErrors, + cseLCIpCheckSumErrors, + cseLCIpxPlenErrors, + cseLCIpxTooShortErrors + } + STATUS current + DESCRIPTION + "A collection of objects providing the IP and IPX error + statistics." + ::= { cseMIBGroups 31 } + +cseNetflowASInfoExportGroup OBJECT-GROUP + OBJECTS { cseNetflowASInfoExportCtrl } + STATUS current + DESCRIPTION + "A collection of object providing AS number information + export control." + ::= { cseMIBGroups 32 } + +cseNetflowPerVlanIfGroup OBJECT-GROUP + OBJECTS { + cseNetflowPerVlanIfGlobalEnable, + cseNetflowPerVlanIfEnable + } + STATUS current + DESCRIPTION + "A collection of objects providing control of netflow entry + creation per vlan." + ::= { cseMIBGroups 33 } + +cseMetUsageGroup OBJECT-GROUP + OBJECTS { + cseMetTotalEntries, + cseMetUnallocatedSpcFreeEntries, + cseMetAllocatedSpcFreeEntries + } + STATUS current + DESCRIPTION + "A collection of objects providing MET utilization + information." + ::= { cseMIBGroups 34 } + +cseFlowMcastMgmtGroup1 OBJECT-GROUP + OBJECTS { + cseFlowMcastMaxQueries, + cseFlowMcastQueryMask, + cseFlowMcastQuerySrcVlan, + cseFlowMcastQuerySkipNFlows, + cseFlowMcastQueryOwner, + cseFlowMcastQueryTotalFlows, + cseFlowMcastQueryRows, + cseFlowMcastQueryStatus, + cseFlowMcastQueryCreateTime, + cseFlowMcastResultSrcVlan, + cseFlowMcastResultCreatedTS, + cseFlowMcastResultLastUsedTS, + cseFlowMcastResultPkts, + cseFlowMcastResultOctets, + cseFlowMcastResultDstVlans, + cseFlowMcastSwitchStatus + } + STATUS current + DESCRIPTION + "A collection of objects for querying IP multicast flows + stored in hardware switching cache." + ::= { cseMIBGroups 35 } + +cseFlowMcastRtrMgmtGroup OBJECT-GROUP + OBJECTS { + cseFlowMcastQueryRtrIndex, + cseFlowMcastResultRtrIp, + cseFlowMcastResultRtrMac + } + STATUS current + DESCRIPTION + "A collection of objects for specifying the router based + information while IP multicast flows stored in the hardware + switching cache are queried." + ::= { cseMIBGroups 36 } + +cseFlowMcastMgmtGroup2 OBJECT-GROUP + OBJECTS { + cseFlowMcastQueryMvrf, + cseFlowMcastQueryAddrType, + cseFlowMcastQuerySource, + cseFlowMcastQueryGroup, + cseFlowMcastResultMvrf, + cseFlowMcastResultAddrType, + cseFlowMcastResultGroup, + cseFlowMcastResultSource, + cseFlowMcastResultFlowType, + cseFlowMcastResultHFlag1k2k, + cseFlowMcastResultHFlag3k4k + } + STATUS current + DESCRIPTION + "A collection of objects for enhanced querying of + IP multicast flows stored in hardware switching cache." + ::= { cseMIBGroups 37 } + +cseCacheStatisticsGroup OBJECT-GROUP + OBJECTS { + cseCacheEntriesCreated, + cseCacheEntriesFailed + } + STATUS current + DESCRIPTION + "A collection of objects providing switch engine statistics + on the flow cache entries." + ::= { cseMIBGroups 38 } + +cseL3SwitchedPktsPerSecGroup OBJECT-GROUP + OBJECTS { + cseL3SwitchedPktsPerSec, + cseL3SwitchedAggrPktsPerSec + } + STATUS current + DESCRIPTION + "A collection of objects providing switch engine + statistics on total number of packets switched per + second." + ::= { cseMIBGroups 39 } + +cseStatisticsFlowGroup1 OBJECT-GROUP + OBJECTS { cseFlowTotalIpv4Flows } + STATUS current + DESCRIPTION + "A collection of object providing switch engine statistics + on total number of Ipv4 flow entries." + ::= { cseMIBGroups 40 } + +END + + -- cgit v1.2.3