From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cisco/CISCOSB-PHY-MIB | 230 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 230 insertions(+) create mode 100644 MIBS/cisco/CISCOSB-PHY-MIB (limited to 'MIBS/cisco/CISCOSB-PHY-MIB') diff --git a/MIBS/cisco/CISCOSB-PHY-MIB b/MIBS/cisco/CISCOSB-PHY-MIB new file mode 100644 index 0000000..6f6861f --- /dev/null +++ b/MIBS/cisco/CISCOSB-PHY-MIB @@ -0,0 +1,230 @@ +CISCOSB-PHY-MIB DEFINITIONS ::= BEGIN + +-- Title: CISCOSB PHY MIB +-- Version: 7.38 +-- Date: 10 Sep 2004 +-- +IMPORTS + OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI + ifIndex FROM IF-MIB + TimeStamp, DisplayString FROM SNMPv2-TC + switch001 FROM CISCOSB-MIB + TEXTUAL-CONVENTION FROM SNMPv2-TC; + + rlPhy MODULE-IDENTITY + LAST-UPDATED "200409100000Z" -- September 30, 2002 + ORGANIZATION "Cisco Systems, Inc." + + CONTACT-INFO + "Postal: 170 West Tasman Drive + San Jose , CA 95134-1706 + USA + + + Website: Cisco Small Business Support Community " + + DESCRIPTION + "The MIB module describes the private MIB for testing Layer1 interfaces supported + by CISCOSB's software and products." + REVISION "200209300024Z" -- September 30, 2002 + DESCRIPTION + "Initial revision" + REVISION "200309210024Z" -- September 21, 2003 + DESCRIPTION + "Added MODULE-IDENTITY and TEXTUAL-CONVENTION IMPORTS." + ::= { switch001 90 } + + +RlPhyTestType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value indicating the test to perform." + SYNTAX INTEGER { + rlPhyTestTableNoTest(1), + rlPhyTestTableCableStatus(2), + rlPhyTestTableCableFault(3), + rlPhyTestTableCableLength(4), + rlPhyTestTableTransceiverTemp(5), + rlPhyTestTableTransceiverSupply(6), + rlPhyTestTableTxBias(7), + rlPhyTestTableTxOutput(8), + rlPhyTestTableRxOpticalPower(9), + rlPhyTestTableDataReady(10), + rlPhyTestTableLOS(11), + rlPhyTestTableTxFault(12), + rlPhyTestTableCableChannel1(13), + rlPhyTestTableCableChannel2(14), + rlPhyTestTableCableChannel3(15), + rlPhyTestTableCableChannel4(16), + rlPhyTestTableCablePolarity1(17), + rlPhyTestTableCablePolarity2(18), + rlPhyTestTableCablePolarity3(19), + rlPhyTestTableCablePolarity4(20), + rlPhyTestTableCablePairSkew1(21), + rlPhyTestTableCablePairSkew2(22), + rlPhyTestTableCablePairSkew3(23), + rlPhyTestTableCablePairSkew4(24), + rlPhyTestTableSFPEepromQualified(25) + } + +rlPhyTest OBJECT IDENTIFIER ::= { rlPhy 1 } + +rlPhyTestSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPhyTestSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { rlPhyTest 1} + +rlPhyTestSetEntry OBJECT-TYPE + SYNTAX RlPhyTestSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing objects for invoking tests on an interface." + INDEX {ifIndex } + ::= { rlPhyTestSetTable 1 } + +RlPhyTestSetEntry ::= + SEQUENCE { + rlPhyTestSetType RlPhyTestType + } + +rlPhyTestSetType OBJECT-TYPE + SYNTAX RlPhyTestType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A control variable used to start operator initiated interface + tests.1 indicates that no test has been initiated. Only + operator initiated interface tests can be set to this variable." + ::= { rlPhyTestSetEntry 1 } + +rlPhyTestGetTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlPhyTestGetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "" + ::= { rlPhyTest 2 } + +rlPhyTestGetEntry OBJECT-TYPE + SYNTAX RlPhyTestGetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing results of tests on an interface." + INDEX {ifIndex, rlPhyTestGetType} + ::= { rlPhyTestGetTable 1 } + +RlPhyTestGetEntry ::= + SEQUENCE { + rlPhyTestGetType RlPhyTestType, + rlPhyTestGetStatus INTEGER, + rlPhyTestGetResult INTEGER, + rlPhyTestGetUnits INTEGER, + rlPhyTestGetAlarm INTEGER, + rlPhyTestGetTimeStamp DisplayString + } + +rlPhyTestGetType OBJECT-TYPE + SYNTAX RlPhyTestType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A control variable used to, 1 to indicate that this test can be + done on the specified port, 2 to initiate the test whenever the + user wishes" + ::= { rlPhyTestGetEntry 1 } + +rlPhyTestGetStatus OBJECT-TYPE + SYNTAX INTEGER { + none(1), -- no test yet requested + success(2), + inProgress(3), + notSupported(4), + unAbleToRun(5), -- due to state of system + aborted(6), + failed(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the status of the most recently + requested test for operator initiated tests or the value + none(1) if no tests have been requested since the last + reset. For non operator initiated tests the value is always + none(1). + Note that this facility provides no provision for saving + the results of one test when starting another, as could + be required if used by multiple managers concurrently." + ::= { rlPhyTestGetEntry 2 } + +rlPhyTestGetResult OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object holds the test result" + ::= { rlPhyTestGetEntry 3 } + +rlPhyTestGetUnits OBJECT-TYPE + SYNTAX INTEGER { + integer(1), + boolean(2), + downUP(3), + reverseNormal(4), + mdiMdix(5), + meter(6), + degree(7), -- Celsius + microVolt(8), + microOham(9), + microAmper(10), + microWatt(11), + millisecond(12), + alaskaPhyLength(13), + alaskaPhyStatus(14), + dbm(15), + decidbm(16), + milidbm(17), + abcd(18), + nanosecond(19) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The test result unit of measure. The units can be standard unit or special units + that are designed for special test. + + The alaskaPhyLength unit is design for the VCT diagnostic and its values are: + less-than-50M(1), 50-80M(2), 80-110M(3), 110-140M(4), more-than-140M(5). + + The alaskaPhyStatus unit is design for the VCT diagnostic and its values are: + 4-pair-cable(1), 2-pair-cable(2), no-cable(3), open-cable(4), short-cable(5), bad-cable(6), impedance-mismatch(7)." + ::= { rlPhyTestGetEntry 4 } + +rlPhyTestGetAlarm OBJECT-TYPE + SYNTAX INTEGER { + notRelevant(1), + noAlarmSet(2), + lowWarning(3), + highWarning(4), + lowAlarm(5), + highAlarm(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object hold the Alarm for this Entry. only Test that have can have alarms + use this field, other holds the Value notRelevant(1) " + ::= { rlPhyTestGetEntry 5 } + +rlPhyTestGetTimeStamp OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time in string (formated DD-MMM-YYYY HH:MM:SS e.g + 14-Apr-2002 10:33:31)" + ::= { rlPhyTestGetEntry 6 } + +END -- cgit v1.2.3