From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cumulus/CUMULUS-BGPUN-MIB | 737 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 737 insertions(+) create mode 100644 MIBS/cumulus/CUMULUS-BGPUN-MIB (limited to 'MIBS/cumulus/CUMULUS-BGPUN-MIB') diff --git a/MIBS/cumulus/CUMULUS-BGPUN-MIB b/MIBS/cumulus/CUMULUS-BGPUN-MIB new file mode 100644 index 0000000..af6aace --- /dev/null +++ b/MIBS/cumulus/CUMULUS-BGPUN-MIB @@ -0,0 +1,737 @@ +CUMULUS-BGPUN-MIB DEFINITIONS ::= BEGIN + +-- +-- BGP Unnumbered attributes in the Cumulus enterprise MIB -- +-- + +IMPORTS + OBJECT-TYPE, MODULE-IDENTITY, + Integer32 FROM SNMPv2-SMI + ifIndex FROM IF-MIB + cumulusMib FROM CUMULUS-SNMP-MIB + DisplayString, + TEXTUAL-CONVENTION, TimeStamp FROM SNMPv2-TC + InetAddressIPv6, + InetAddress FROM INET-ADDRESS-MIB; + +bgp MODULE-IDENTITY + LAST-UPDATED "202010120000Z" + ORGANIZATION "Cumulus Networks/Nvidia" + CONTACT-INFO + "postal: Cumulus Networks + 185 E. Dana Street, + Mountain View, CA 94041 + web: http://www.cumulusnetworks.com" + DESCRIPTION + "" + REVISION "202010120000Z" + DESCRIPTION + "Initial version." + ::= { cumulusMib 4 } + + bgpVersion OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vector of supported BGP protocol version + numbers. Each peer negotiates the version + from this vector. Versions are identified + via the string of bits contained within this + object. The first octet contains bits 0 to + 7, the second octet contains bits 8 to 15, + and so on, with the most significant bit + referring to the lowest bit number in the + octet (e.g., the MSB of the first octet + refers to bit 0). If a bit, i, is present + and set, then the version (i+1) of the BGP + is supported." + ::= { bgp 1 } + + bgpLocalAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local autonomous system number." + ::= { bgp 2 } + + bgpOuterTable OBJECT IDENTIFIER ::= {bgp 3} + -- BGP Peer table. This table contains, one entry per + -- BGP peer, information about the BGP peer. + + bgpPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "BGP peer table. This table contains, + one entry per BGP peer, information about + the connections with BGP peers." + ::= { bgpOuterTable 1 } + + bgpPeerEntry OBJECT-TYPE + SYNTAX BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing information about the + connection with a BGP peer." + INDEX { bgpPeerRemoteAddr } + ::= { bgpPeerTable 1 } + + BgpPeerEntry ::= SEQUENCE { + bgpPeerIdentifier + IpAddress, + bgpPeerState + INTEGER, + bgpPeerAdminStatus + INTEGER, + bgpPeerNegotiatedVersion + Integer32, + bgpPeerLocalAddr + InetAddress, + bgpPeerLocalPort + INTEGER, + bgpPeerRemoteAddr + IpAddress, + bgpPeerRemotePort + INTEGER, + bgpPeerRemoteAs + INTEGER, + bgpPeerInUpdates + Counter32, + bgpPeerOutUpdates + Counter32, + bgpPeerInTotalMessages + Counter32, + bgpPeerOutTotalMessages + Counter32, + bgpPeerLastError + OCTET STRING, + bgpPeerFsmEstablishedTransitions + Counter32, + bgpPeerFsmEstablishedTime + Gauge32, + bgpPeerConnectRetryInterval + INTEGER, + bgpPeerHoldTime + INTEGER, + bgpPeerKeepAlive + INTEGER, + bgpPeerHoldTimeConfigured + INTEGER, + bgpPeerKeepAliveConfigured + INTEGER, + bgpPeerMinASOriginationInterval + INTEGER, + bgpPeerMinRouteAdvertisementInterval + INTEGER, + bgpPeerInUpdateElapsedTime + Gauge32, + bgpPeerIface + OCTET STRING, + bgpPeerDesc + OCTET STRING + } + + bgpPeerIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of this entry's BGP + peer." + ::= { bgpPeerEntry 1 } + + bgpPeerState OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + connect(2), + active(3), + opensent(4), + openconfirm(5), + established(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP peer connection state." + ::= { bgpPeerEntry 2 } + + bgpPeerAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + stop(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of the BGP connection. + A transition from 'stop' to 'start' will + cause the BGP Start Event to be generated. + A transition from 'start' to 'stop' will + cause the BGP Stop Event to be generated. + This parameter can be used to restart BGP + peer connections. Care should be used in + providing write access to this object + without adequate authentication." + ::= { bgpPeerEntry 3 } + + bgpPeerNegotiatedVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The negotiated version of BGP running + between the two peers." + ::= { bgpPeerEntry 4 } + + bgpPeerLocalAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local IP address of this entry's BGP + connection." + ::= { bgpPeerEntry 5 } + + bgpPeerLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local port for the TCP connection + between the BGP peers." + ::= { bgpPeerEntry 6 } + + bgpPeerRemoteAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote IP address of this entry's BGP + peer." + ::= { bgpPeerEntry 7 } + + bgpPeerRemotePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote port for the TCP connection + between the BGP peers. Note that the + objects bgpPeerLocalAddr, + bgpPeerLocalPort, bgpPeerRemoteAddr and + bgpPeerRemotePort provide the appropriate + reference to the standard MIB TCP + connection table." + ::= { bgpPeerEntry 8 } + + bgpPeerRemoteAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote autonomous system number." + ::= { bgpPeerEntry 9 } + + bgpPeerInUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages + received on this connection. This object + should be initialized to zero (0) when the + connection is established." + ::= { bgpPeerEntry 10 } + + bgpPeerOutUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages + transmitted on this connection. This + object should be initialized to zero (0) + when the connection is established." + ::= { bgpPeerEntry 11 } + + bgpPeerInTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages received + from the remote peer on this connection. + This object should be initialized to zero + when the connection is established." + ::= { bgpPeerEntry 12 } + + bgpPeerOutTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages transmitted to + the remote peer on this connection. This + object should be initialized to zero when + the connection is established." + ::= { bgpPeerEntry 13 } + + bgpPeerLastError OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last error code and subcode seen by this + peer on this connection. If no error has + occurred, this field is zero. Otherwise, the + first byte of this two byte OCTET STRING + contains the error code, and the second byte + contains the subcode." + ::= { bgpPeerEntry 14 } + + bgpPeerFsmEstablishedTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of times the BGP FSM + transitioned into the established state." + ::= { bgpPeerEntry 15 } + + bgpPeerFsmEstablishedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This timer indicates how long (in + seconds) this peer has been in the + Established state or how long + since this peer was last in the + Established state. It is set to zero when + a new peer is configured or the router is + booted." + ::= { bgpPeerEntry 16 } + + bgpPeerConnectRetryInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + ConnectRetry timer. The suggested value + for this timer is 120 seconds." + ::= { bgpPeerEntry 17 } + + bgpPeerHoldTime OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold + Timer established with the peer. The + value of this object is calculated by this + BGP speaker by using the smaller of the + value in bgpPeerHoldTimeConfigured and the + Hold Time received in the OPEN message. + This value must be at lease three seconds + if it is not zero (0) in which case the + Hold Timer has not been established with + the peer, or, the value of + bgpPeerHoldTimeConfigured is zero (0)." + ::= { bgpPeerEntry 18 } + + bgpPeerKeepAlive OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the KeepAlive + timer established with the peer. The value + of this object is calculated by this BGP + speaker such that, when compared with + bgpPeerHoldTime, it has the same + proportion as what + bgpPeerKeepAliveConfigured has when + compared with bgpPeerHoldTimeConfigured. + If the value of this object is zero (0), + it indicates that the KeepAlive timer has + not been established with the peer, or, + the value of bgpPeerKeepAliveConfigured is + zero (0)." + ::= { bgpPeerEntry 19 } + + bgpPeerHoldTimeConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold Time + configured for this BGP speaker with this + peer. This value is placed in an OPEN + message sent to this peer by this BGP + speaker, and is compared with the Hold + Time field in an OPEN message received + from the peer when determining the Hold + Time (bgpPeerHoldTime) with the peer. + This value must not be less than three + seconds if it is not zero (0) in which + case the Hold Time is NOT to be + established with the peer. The suggested + value for this timer is 90 seconds." + ::= { bgpPeerEntry 20 } + + bgpPeerKeepAliveConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + KeepAlive timer configured for this BGP + speaker with this peer. The value of this + object will only determine the + KEEPALIVE messages' frequency relative to + the value specified in + bgpPeerHoldTimeConfigured; the actual + time interval for the KEEPALIVE messages + is indicated by bgpPeerKeepAlive. A + reasonable maximum value for this timer + would be configured to be one + third of that of + bgpPeerHoldTimeConfigured. + If the value of this object is zero (0), + no periodical KEEPALIVE messages are sent + to the peer after the BGP connection has + been established. The suggested value for + this timer is 30 seconds." + ::= { bgpPeerEntry 21 } + + bgpPeerMinASOriginationInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinASOriginationInterval timer. + The suggested value for this timer is 15 + seconds." + ::= { bgpPeerEntry 22 } + + bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinRouteAdvertisementInterval timer. + The suggested value for this timer is 30 + seconds." + ::= { bgpPeerEntry 23 } + + bgpPeerInUpdateElapsedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Elapsed time in seconds since the last BGP + UPDATE message was received from the peer. + Each time bgpPeerInUpdates is incremented, + the value of this object is set to zero + (0)." + ::= { bgpPeerEntry 24 } + + bgpPeerIface OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For BGP unnumbered neighbors routes are + using interfaces as nexthop interfaces. + This is the inteface from which nexthop + route" + ::= { bgpPeerEntry 25 } + + bgpPeerDesc OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is neighbour or peer description + field. It provides human readable info + about neighbour or peer" + ::= { bgpPeerEntry 26 } + + bgpIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of local system." + ::= { bgp 4 } + + -- BGP-4 Received Path Attribute Table. This table + -- contains, one entry per path to a network, path + -- attributes received from all peers running BGP-4. + + bgp4PathAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The BGP-4 Received Path Attribute Table + contains information about paths to + destination networks received from all + BGP4 peers." + ::= { bgp 5 } + + bgp4PathAttrEntry OBJECT-TYPE + SYNTAX Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a path to a network." + INDEX { bgp4PathAttrIpAddrPrefix, + bgp4PathAttrIpAddrPrefixLen, + bgp4PathAttrPeer } + ::= { bgp4PathAttrTable 1 } + + Bgp4PathAttrEntry ::= SEQUENCE { + bgp4PathAttrPeer + InetAddress, + bgp4PathAttrIpAddrPrefixLen + INTEGER, + bgp4PathAttrIpAddrPrefix + IpAddress, + bgp4PathAttrOrigin + INTEGER, + bgp4PathAttrASPathSegment + OCTET STRING, + bgp4PathAttrNextHop + InetAddress, + bgp4PathAttrMultiExitDisc + INTEGER, + bgp4PathAttrLocalPref + INTEGER, + bgp4PathAttrAtomicAggregate + INTEGER, + bgp4PathAttrAggregatorAS + INTEGER, + bgp4PathAttrAggregatorAddr + IpAddress, + bgp4PathAttrCalcLocalPref + INTEGER, + bgp4PathAttrBest + INTEGER, + bgp4PathAttrUnknown + OCTET STRING + + } + + bgp4PathAttrPeer OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the peer where the path + information was learned." + ::= { bgp4PathAttrEntry 1 } + + bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Length in bits of the IP address prefix + in the Network Layer Reachability + Information field." + ::= { bgp4PathAttrEntry 2 } + + bgp4PathAttrIpAddrPrefix OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An IP address prefix in the Network Layer + Reachability Information field. This object + is an IP address containing the prefix with + length specified by + bgp4PathAttrIpAddrPrefixLen. + Any bits beyond the length specified by + bgp4PathAttrIpAddrPrefixLen are zeroed." + ::= { bgp4PathAttrEntry 3 } + + bgp4PathAttrOrigin OBJECT-TYPE + SYNTAX INTEGER { + igp(1),-- networks are interior + egp(2),-- networks learned + -- via EGP + incomplete(3) -- undetermined + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ultimate origin of the path + information." + ::= { bgp4PathAttrEntry 4 } + + bgp4PathAttrASPathSegment OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence of AS path segments. Each AS + path segment is represented by a triple + . + + The type is a 1-octet field which has two + possible values: + 1 AS_SET: unordered set of ASs a + route in the UPDATE + message has traversed + 2 AS_SEQUENCE: ordered set of ASs + a route in the UPDATE + message has traversed. + + The length is a 1-octet field containing the + number of ASs in the value field. + + The value field contains one or more AS + numbers, each AS is represented in the octet + string as a pair of octets according to the + following algorithm: + + first-byte-of-pair = ASNumber / 256; + second-byte-of-pair = ASNumber & 255;" + ::= { bgp4PathAttrEntry 5 } + + bgp4PathAttrNextHop OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of the border router that + should be used for the destination + network." + ::= { bgp4PathAttrEntry 6 } + + bgp4PathAttrMultiExitDisc OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This metric is used to discriminate + between multiple exit points to an + adjacent autonomous system. A value of -1 + indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 7 } + + bgp4PathAttrLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The originating BGP4 speaker's degree of + preference for an advertised route. A + value of -1 indicates the absence of this + attribute." + ::= { bgp4PathAttrEntry 8 } + + bgp4PathAttrAtomicAggregate OBJECT-TYPE + SYNTAX INTEGER { + lessSpecificRrouteNotSelected(1), + lessSpecificRouteSelected(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Whether or not the local system has + selected a less specific route without + selecting a more specific route." + ::= { bgp4PathAttrEntry 9 } + + bgp4PathAttrAggregatorAS OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AS number of the last BGP4 speaker that + performed route aggregation. A value of + zero (0) indicates the absence of this + attribute." + ::= { bgp4PathAttrEntry 10 } + + bgp4PathAttrAggregatorAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the last BGP4 speaker + that performed route aggregation. A value + of 0.0.0.0 indicates the absence of this + attribute." + ::= { bgp4PathAttrEntry 11 } + + bgp4PathAttrCalcLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The degree of preference calculated by the + receiving BGP4 speaker for an advertised + route. A value of -1 indicates the + absence of this attribute." + ::= { bgp4PathAttrEntry 12 } + + bgp4PathAttrBest OBJECT-TYPE + SYNTAX INTEGER { + false(1),-- not chosen as best route + true(2) -- chosen as best route + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of whether or not this route + was chosen as the best BGP4 route." + ::= { bgp4PathAttrEntry 13 } + + bgp4PathAttrUnknown OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One or more path attributes not understood + by this BGP4 speaker. Size zero (0) + indicates the absence of such + attribute(s). Octets beyond the maximum + size, if any, are not recorded by this + object." + ::= { bgp4PathAttrEntry 14 } + + + -- Traps. + + bgpTraps OBJECT IDENTIFIER ::= { bgp 7 } + + bgpEstablished NOTIFICATION-TYPE + OBJECTS { bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGP Established event is generated when + the BGP FSM enters the ESTABLISHED state." + ::= { bgpTraps 1 } + + bgpBackwardTransition NOTIFICATION-TYPE + OBJECTS { bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGPBackwardTransition Event is generated + when the BGP FSM moves from a higher numbered + state to a lower numbered state." + ::= { bgpTraps 2 } + +END -- cgit v1.2.3