From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB | 309 +++++++++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100644 MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB (limited to 'MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB') diff --git a/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB b/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB new file mode 100644 index 0000000..1beab89 --- /dev/null +++ b/MIBS/dasan/SLE-MPLS-TP-TUNNEL-STATISTICS-MIB @@ -0,0 +1,309 @@ +-- +-- sle-mpls-tp-tunnel-statistics-mib.mib +-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 +-- Thursday, January 21, 2016 at 14:30:41 +-- + + SLE-MPLS-TP-TUNNEL-STATISTICS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + sleMgmt + FROM DASAN-SMI + mplsStdMIB + FROM MPLS-TC-STD-MIB + SleControlStatusType, SleControlRequestResultType + FROM SLE-TC-MIB + zeroDotZero, TimeTicks, Unsigned32, Gauge32, Counter64, + OBJECT-TYPE, MODULE-IDENTITY + FROM SNMPv2-SMI; + + + sleMplsTpTunnelStats MODULE-IDENTITY + LAST-UPDATED "201501280000Z" -- January 28, 2015 at 00:00 GMT + ORGANIZATION + "Multiprotocol Label Switching (MPLS) Working Group" + CONTACT-INFO + "Gyerok Kwon + Dasan Networks + Email: grkwon@dasannetworks.com + + Kantharaj B M + Dasan Networks + Email: kanth@dasannetworks.com + + DongChel Shin (Chris) + Dasan Networks + Email: dchshin@dasannetworks.com + + Comments about this document should be emailed + directly to the Dasan support email ID at + support@dasannetworks.com." + DESCRIPTION + "This mib contains the managed objects for MPLS-TP lsp statistics." + REVISION "201601180000Z" -- January 18, 2016 at 00:00 GMT + DESCRIPTION + "Initial version" + ::= { sleMpls 20 } + + + + +-- +-- Node definitions +-- + + sleMpls OBJECT IDENTIFIER ::= { sleMgmt 16 } + + + sleMplsTpTunnelStatsTable OBJECT IDENTIFIER ::= { sleMplsTpTunnelStats 1 } + + + sleMplsTpTunnelStatsInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF SleMplsTpTunnelStatsInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the information about the statistics + of LSP which exist on the LSR or LER." + ::= { sleMplsTpTunnelStatsTable 1 } + + + sleMplsTpTunnelStatsInfoEntry OBJECT-TYPE + SYNTAX SleMplsTpTunnelStatsInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in this table represents the statistics of LSP. + The LSP can be creates by network administator or SNMP agent + as instruct by the MPLS-TP" + INDEX { sleMplsTpTunnelStatsInfoIndex } + ::= { sleMplsTpTunnelStatsInfoTable 1 } + + + SleMplsTpTunnelStatsInfoEntry ::= + SEQUENCE { + sleMplsTpTunnelStatsInfoIndex + Unsigned32, + sleMplsTpTunnelStatsInfoTunnelName + OCTET STRING, + sleMplsTpTunnelStatsInfoRole + INTEGER, + sleMplsTpTunnelStatsInfoFwdTxPkts + Counter64, + sleMplsTpTunnelStatsInfoFwdTxBytes + Counter64, + sleMplsTpTunnelStatsInfoFwdRxPkts + Counter64, + sleMplsTpTunnelStatsInfoFwdRxBytes + Counter64, + sleMplsTpTunnelStatsInfoRevTxPkts + Counter64, + sleMplsTpTunnelStatsInfoRevTxBytes + Counter64, + sleMplsTpTunnelStatsInfoRevRxPkts + Counter64, + sleMplsTpTunnelStatsInfoRevRxBytes + Counter64 + } + + sleMplsTpTunnelStatsInfoIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..65535) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Uniquely identifies a set of tunnel instances + between a pair of ingress and egress LSRs. + Managers should obtain new values for row + creation in this table by reading + mplsTunnelIndexN. When + the MPLS signalling protocol is rsvp(2) this value + SHOULD be equal to the value signaled in the + Tunnel Id of the Session object. When the MPLS + signalling protocol is crldp(3) this value + SHOULD be equal to the value signaled in the + LSP ID." + ::= { sleMplsTpTunnelStatsInfoEntry 1 } + + + sleMplsTpTunnelStatsInfoTunnelName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The tunnel name of the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 2 } + + + sleMplsTpTunnelStatsInfoRole OBJECT-TYPE + SYNTAX INTEGER + { + source(0), + transit(1), + destination(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value signifies the role that this tunnel + entry/instance represents. This value MUST be set + to head(1) at the originating point of the tunnel. + This value MUST be set to transit(2) at transit + points along the tunnel, if transit points are + supported. This value MUST be set to tail(3) at the + terminating point of the tunnel if tunnel tails are + supported. + + The value headTail(4) is provided for tunnels that + begin and end on the same LSR." + ::= { sleMplsTpTunnelStatsInfoEntry 3 } + + + sleMplsTpTunnelStatsInfoFwdTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet sent through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 4 } + + + sleMplsTpTunnelStatsInfoFwdTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total bytes sent through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 5 } + + + sleMplsTpTunnelStatsInfoFwdRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet recieved through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 6 } + + + sleMplsTpTunnelStatsInfoFwdRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total bytes recieved through the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 7 } + + + sleMplsTpTunnelStatsInfoRevTxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet sent through the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 8 } + + + sleMplsTpTunnelStatsInfoRevTxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total bytes sent through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 9 } + + + sleMplsTpTunnelStatsInfoRevRxPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packet recieved through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 10 } + + + sleMplsTpTunnelStatsInfoRevRxBytes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total bytes recieved through + the LSP." + ::= { sleMplsTpTunnelStatsInfoEntry 11 } + + + sleMplsTpTunnelStatsControl OBJECT IDENTIFIER ::= { sleMplsTpTunnelStatsTable 2 } + + + sleMplsTpTunnelStatsControlRequest OBJECT-TYPE + SYNTAX INTEGER { setToClearTunnelStats(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object holds the possible read-write columns that can be + modified in the Vrf table. For each read-write column of Vrf + table, a Set Operation control value is added in this object." + ::= { sleMplsTpTunnelStatsControl 1 } + + + sleMplsTpTunnelStatsControlStatus OBJECT-TYPE + SYNTAX SleControlStatusType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object displays the status of the configuration done." + ::= { sleMplsTpTunnelStatsControl 2 } + + + sleMplsTpTunnelStatsControlTimer OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is based on the SLE style where a timer is configured + for every control table." + ::= { sleMplsTpTunnelStatsControl 3 } + + + sleMplsTpTunnelStatsControlTimeStamp OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies the time at which the configuration is done." + ::= { sleMplsTpTunnelStatsControl 4 } + + + sleMplsTpTunnelStatsReqResult OBJECT-TYPE + SYNTAX SleControlRequestResultType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The standard result of the SET operation is stored here." + ::= { sleMplsTpTunnelStatsControl 5 } + + + sleMplsTpTunnelStatsControlName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The tunnel name of the LSP. + + To clear all the tunnel statistics, give the name as 'all'. + + To clear the specific tunnel, give the specific tunnel name. + " + ::= { sleMplsTpTunnelStatsControl 6 } + + + + END + +-- +-- sle-mpls-tp-tunnel-statistics-mib.mib +-- -- cgit v1.2.3