From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/dlink/DLINKSW-POE-MIB | 700 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 700 insertions(+) create mode 100644 MIBS/dlink/DLINKSW-POE-MIB (limited to 'MIBS/dlink/DLINKSW-POE-MIB') diff --git a/MIBS/dlink/DLINKSW-POE-MIB b/MIBS/dlink/DLINKSW-POE-MIB new file mode 100644 index 0000000..3cfaa46 --- /dev/null +++ b/MIBS/dlink/DLINKSW-POE-MIB @@ -0,0 +1,700 @@ +-- ***************************************************************** +-- DLINKSW-POE-MIB.mib : D-Link extensions to POWER-ETHERNET-MIB (PoE) +-- +-- Copyright (c) 2017 D-Link Corporation, all rights reserved. +-- +-- ***************************************************************** +DLINKSW-POE-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32 + FROM SNMPv2-SMI + DisplayString,TruthValue + FROM SNMPv2-TC + InetAddressType, InetAddress + FROM INET-ADDRESS-MIB + PortList + FROM Q-BRIDGE-MIB + pethMainPseGroupIndex, pethPsePortIndex, pethPsePortShortCounter, + pethPsePortOverLoadCounter, pethPsePortPowerDeniedCounter + FROM POWER-ETHERNET-MIB + dlinkIndustrialCommon + FROM DLINK-ID-REC-MIB; + + + dlinkSwPoeExtMIB MODULE-IDENTITY + LAST-UPDATED "201703150000Z" + ORGANIZATION "D-Link Corp." + CONTACT-INFO + " D-Link Corporation + Postal: No. 289, Sinhu 3rd Rd., Neihu District, + Taipei City 114, Taiwan, R.O.C + Tel: +886-2-66000123 + E-mail: tsd@dlink.com.tw + " + DESCRIPTION + "A MIB module for extending POWER-ETHERNET-MIB specified in + RFC 3621. + " + REVISION "201305290000Z" + DESCRIPTION + "Initial version of this MIB module." + REVISION "201309240000Z" + DESCRIPTION + "Add dPoeGroupIfLedMode node." + REVISION "201703150000Z" + DESCRIPTION + "Add dPoeIfPdAliveCfgTable table to support PD alive check feature." + ::= { dlinkIndustrialCommon 24 } + +-- ----------------------------------------------------------------------------- + dPoeMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 0 } + dPoeMIBObjects OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 1 } + dPoeMIBConformance OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 2 } + +-------------------------------------------------------------------------------- + dPoeGroupCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoeGroupCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of group configurations for PoE. + Group means box in the stack or module in a rack. + For non-modular devices, the pethMainPseGroupIndex is 1. + " + ::= { dPoeMIBObjects 1 } + + dPoeGroupCfgEntry OBJECT-TYPE + SYNTAX DPoeGroupCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry contains the system configuration of the PoE on a group." + INDEX { pethMainPseGroupIndex } + ::= { dPoeGroupCfgTable 1 } + + DPoeGroupCfgEntry ::= SEQUENCE { + dPoeGroupPolicyPreempt TruthValue, + dPoeGroupClearIfStatistic PortList, + dPoeGroupIfLedMode INTEGER + } + + dPoeGroupPolicyPreempt OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object configures whether to disconnect the PD which is powered + with lower priority in order to release the power to the new connected + PD with higher priority under power shortage condition. + If this object is 'false', then the policy is first in first serviced. + Thus the new PD will not be serviced if the power budget is running out. + If this object is 'true', then the power provisioned to PD + with lower priority can be preempted to release the power to the new + connected PD with higher priority. " + DEFVAL { false } + ::= { dPoeGroupCfgEntry 1 } + + dPoeGroupClearIfStatistic OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to clear the PoE statistics of pethPsePortEntry + for specified ports. + " + ::= { dPoeGroupCfgEntry 2 } + + dPoeGroupIfLedMode OBJECT-TYPE + SYNTAX INTEGER { + poeMode(1), + linkMode(2), + invalid(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "For some devices,port LED can indicate either poe status or link status. + This object is used to configure or display port LED mode. + poeMode(1) - indicates poe status. + linkMode(2) - indicates link status. + + For other devices have LEDs to indicate poe status and link status separately, + this object only can get value of invalid(3) to mean this node is meaningless. + " + ::= { dPoeGroupCfgEntry 3 } +------------------------------------------------------------------------------- + dPoeGroupInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoEGroupInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of PoE information for groups." + ::= { dPoeMIBObjects 2 } + + dPoeGroupInfoEntry OBJECT-TYPE + SYNTAX DPoEGroupInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry contains the system information of the PoE on a group." + INDEX { pethMainPseGroupIndex } + ::= { dPoeGroupInfoTable 1 } + + DPoEGroupInfoEntry ::= SEQUENCE { + dPoeGroupMaxPorts Integer32, + dPoeGroupHWVersion DisplayString, + dPoeGroupSWVersion DisplayString + } + + dPoeGroupMaxPorts OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the maximum number of ports that the group can support." + ::= { dPoeGroupInfoEntry 1 } + + dPoeGroupHWVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates H/W version of PoE chip." + ::= { dPoeGroupInfoEntry 2 } + + dPoeGroupSWVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates firmware version of PoE chip." + ::= { dPoeGroupInfoEntry 3 } + +------------------------------------------------------------------------------------------------------ + dPoeIfObjects OBJECT IDENTIFIER ::= { dPoeMIBObjects 3 } + + dPoeIfCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoeIfCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of PoE configuration + information for ports." + ::= { dPoeIfObjects 1 } + + dPoeIfCfgEntry OBJECT-TYPE + SYNTAX DPoeIfCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry contains PoE configuration on a port." + INDEX { + pethMainPseGroupIndex, + pethPsePortIndex + } + ::= { dPoeIfCfgTable 1 } + + DPoeIfCfgEntry ::= SEQUENCE { + dPoeIfState INTEGER, + dPoeIfMaxPower Integer32, + dPoeIfTimeRange DisplayString, + dPoeIfLegacyPdEnabled TruthValue + } + + dPoeIfState OBJECT-TYPE + SYNTAX INTEGER { + auto(1), + never(2), + static(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the PoE state of the entry. + auto(1) - the port will automatically detect the PD and provision + power to the PD. The max wattage value which can be provisioned + to the port is determined by dPoeIfMaxPower. If dPoeIfMaxPower + is unspecified, then the class of the PD auto determines the + maximum wattage which can be provisioned. The PD will not be + provisioned if it requests more wattage than the max wattage + which is determined. + never(2) - indicates the port will not supply power to connected PD; + static(3) - indicates manager pre-allocate power budget to the port + by configuring the dPoeIfMaxPower object. The power budget is allocated + to the port even though there is no PD connected to the port. + If dPoeIfMaxPower is not configured, default value is 15400mW for 802.3af + and 30000mW for 802.3at." + DEFVAL {auto} + ::= { dPoeIfCfgEntry 1 } + + dPoeIfMaxPower OBJECT-TYPE + SYNTAX Integer32( 0 | 1000..30000) + UNITS "milliwatts" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the max wattage value which can + be provisioned to the port. + Note: This object is valid only while the dPoeIfState + object is configured as auto or static." + ::= { dPoeIfCfgEntry 2 } + + dPoeIfTimeRange OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the name of time-range profile to delineate + the activation period. + A zero length string indicates the time-range is not specified. + Note: This object is valid only while the dPoeIfState is 'auto'." + ::= { dPoeIfCfgEntry 3 } + + dPoeIfLegacyPdEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the state of legacy PD support." + DEFVAL { false } + ::= { dPoeIfCfgEntry 4 } + +------------------------------------------------------------------------------------------------------ + dPoeIfInfoObjects OBJECT IDENTIFIER ::= { dPoeIfObjects 2 } + + dPoeIfStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoeIfStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of PoE status for ports." + ::= { dPoeIfInfoObjects 1 } + + dPoeIfStatusEntry OBJECT-TYPE + SYNTAX DPoeIfStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consists of PoE status for a port." + INDEX { pethMainPseGroupIndex,pethPsePortIndex } + ::= { dPoeIfStatusTable 1 } + + DPoeIfStatusEntry ::= SEQUENCE { + dPoeIfDetectStatus INTEGER, + dPoeIfFaultyType INTEGER + } + + dPoeIfDetectStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + searching(2), + requesting(3), + delivering(4), + faulty(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the operational status of the port PD detection. + disabled(1) - PSE function is disabled. + searching(2) - Remote PD is not connected. + requesting(3) - Remote PD is inserted, but the PSE doesn't provide power yet. + delivering(4) - Remote PD is now powering by PoE system. + faulty(5) - Device detection or a powered device is in a faulty state. + " + ::= { dPoeIfStatusEntry 1 } + + dPoeIfFaultyType OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0), + mpsAbsent(1), + pdShort(2), + overload(3), + powerDenied(4), + thermalShutdown(5), + startupFailure(6), + classificationFailure(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the specific faulty type. It is meaningful + only when dPoeIfDetectStatus object is 'faulty'. + notApplicable(0) - indicates this object is meaningless, e.g. the + dPoeIfDetectStatus is not 'faulty'. + mpsAbsent(1) - indicates MPS(Maintain Power Signature) Absent + pdShort(2) - indicates PD Short + overload(3) - indicates Overload + powerDenied(4) - indicates Power Denied + thermalShutdown(5)- indicates Thermal Shutdown + startupFailure(6) - indicates Startup Failure + classificationFailure(7) - indicates Classification Failure(IEEE 802.3at) + " + ::= { dPoeIfStatusEntry 2 } + +------------------------------------------------------------------------------------------------------ + dPoeIfMeasurementTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoEIfMeasurementEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of POE measurement + information for ports." + ::= { dPoeIfInfoObjects 2 } + + dPoeIfMeasurementEntry OBJECT-TYPE + SYNTAX DPoEIfMeasurementEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consists of PoE measurement information of a port." + INDEX { + pethMainPseGroupIndex, + pethPsePortIndex + } + ::= { dPoeIfMeasurementTable 1 } + + DPoEIfMeasurementEntry ::= SEQUENCE { + dPoeIfVoltage Integer32, + dPoeIfCurrent Integer32, + dPoeIfTemperature Integer32, + dPoeIfPower Integer32 + } + + dPoeIfVoltage OBJECT-TYPE + SYNTAX Integer32 + UNITS "millivolts" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the voltage of the port in millivolts." + ::= { dPoeIfMeasurementEntry 1 } + + dPoeIfCurrent OBJECT-TYPE + SYNTAX Integer32 + UNITS "milliamperes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the current of port in milliamperes." + ::= { dPoeIfMeasurementEntry 2 } + + dPoeIfTemperature OBJECT-TYPE + SYNTAX Integer32 + UNITS "Degree Centigrade" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the temperature of port in degrees centigrade." + ::= { dPoeIfMeasurementEntry 3 } + + dPoeIfPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates consumption power of port in milliwatts." + ::= { dPoeIfMeasurementEntry 4 } + +--------------------------------------------------------------------------------- +-- Add a new table for SNR-20170223-001(ASV2.1)(PD alive check) +--------------------------------------------------------------------------------- + dPoeIfPdAliveCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF DPoeIfPdAliveCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table consists of a list of configuration for the PD + alive check function for ports. + The PD alive check feature provides the solution for + PD device that has the stop working or no response + problem via Ping mechanism. + Detailed Process: + The detailed processes are described as follows: + 1. The system needs to periodically monitor the + specific PD by using Ping function. If there is no + response, system takes one of the following actions: + (1) Reset: Switch resets (disable then enable) PoE + power on the port which connects to a PD under monitoring. + (2) Notify: Switch sends logs and traps to notify the administrator. + (3) Both: Switch sends logs and traps, and resets the PoE port power. + 2. The system should implement the retry mechanism to check + PD aliveness, hence the system will reset the PoE port power + feeding after the retry by using Ping without any response from a PD. + 3. If the action is Reset or Both, the system needs + to wait for PD recovery from rebooting and then executes + the Ping function again. Besides, the waiting time can + be configured by users. + 4. If PoE schedule (time range) function is configured + on the port which enables the PD Alive Check function, + the time range function has the top priority, and + therefore PD Alive Check function will not work + while PoE time range function is still active. + 5. This function only takes effect on PoE enabled + port with power feeding. + + Note: It is required to setup IP settings properly that + the PD can be reachable for Ping, otherwise this function + cannot work as expected. + + Limitation + 1. Support Ping Function: If the PD does not support ICMP, + this function cannot work normally. + 2. Direct-Connected PD: The Reset Action can only work on + the direct-connected PD. If the PD is not connected directly, + the Reset Action may not work as expected. + 3. PD Also Acts as PSE: If the direct-connected PD is also a PSE, + all the next level PDs connect to this PSE will be power cycling + whenever PD Alive Check function takes effect on 'Reset' or 'Both' Action." + ::= { dPoeIfObjects 3 } + + dPoeIfPdAliveCfgEntry OBJECT-TYPE + SYNTAX DPoeIfPdAliveCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry contains configuration for PD alive check on a port." + INDEX { + pethMainPseGroupIndex, + pethPsePortIndex + } + ::= { dPoeIfPdAliveCfgTable 1 } + + DPoeIfPdAliveCfgEntry ::= SEQUENCE { + dPoeIfPdAliveCfgState INTEGER, + dPoeIfPdAliveCfgPdIpType InetAddressType, + dPoeIfPdAliveCfgPdIpAddr InetAddress, + dPoeIfPdAliveCfgInterval Unsigned32, + dPoeIfPdAliveCfgRetry Unsigned32, + dPoeIfPdAliveCfgWaitTime Unsigned32, + dPoeIfPdAliveCfgAction INTEGER + } + + dPoeIfPdAliveCfgState OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the the PD alive function sate. + enabled - Enable the PD alive check function + disabled - Disable the PD alive check function. + +" + DEFVAL { disabled } + ::= { dPoeIfPdAliveCfgEntry 1 } + + dPoeIfPdAliveCfgPdIpType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the IP address type of the target PD." + ::= { dPoeIfPdAliveCfgEntry 2 } + + dPoeIfPdAliveCfgPdIpAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the IP address of the target PD." + ::= { dPoeIfPdAliveCfgEntry 3 } + + dPoeIfPdAliveCfgInterval OBJECT-TYPE + SYNTAX Unsigned32 (10..300) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the time interval for system + issues ping request to detect the target PD. + The valid range for interval time is 10s to 300s." + DEFVAL { 30 } + ::= { dPoeIfPdAliveCfgEntry 4 } + + dPoeIfPdAliveCfgRetry OBJECT-TYPE + SYNTAX Unsigned32 (0..5) + UNITS "times" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the retry count of ping + request when PD has no response. + The valid range for retry count is 0 to 5 times." + DEFVAL { 2} + ::= { dPoeIfPdAliveCfgEntry 5 } + + + dPoeIfPdAliveCfgWaitTime OBJECT-TYPE + SYNTAX Unsigned32 (30..300) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the waiting time for PD reboot. + The valid range for waiting time is 30s to 300s." + DEFVAL { 90 } + ::= { dPoeIfPdAliveCfgEntry 6 } + + dPoeIfPdAliveCfgAction OBJECT-TYPE + SYNTAX INTEGER { + reset(1), + notify(2), + both(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the action when PD doesn't reply the ping request. + reset- System will reset the PoE port state . + notify- System will send log and trap to notify the administrator. + both- System will send log and trap first and reset the PoE port state." + DEFVAL { both } + ::= { dPoeIfPdAliveCfgEntry 7 } + +-- ***************************************************************************** +-- MIB Notifications +-- ***************************************************************************** + dPoeIfPowerDeniedNotification NOTIFICATION-TYPE + OBJECTS { pethPsePortPowerDeniedCounter } + STATUS current + DESCRIPTION + " This Notification indicates if PSE state diagram enters + the state POWER_DENIED. + At least 500 msec must elapse between notifications + being emitted by the same object instance." + ::= { dPoeMIBNotifications 1 } + + dPoeIfPowerOverLoadNotification NOTIFICATION-TYPE + OBJECTS { pethPsePortOverLoadCounter } + STATUS current + DESCRIPTION + " This Notification indicates if PSE state diagram enters + the state ERROR_DELAY_OVER. + At least 500 msec must elapse between notifications + being emitted by the same object instance." + ::= { dPoeMIBNotifications 2 } + + dPoeIfPowerShortCircuitNotification NOTIFICATION-TYPE + OBJECTS { pethPsePortShortCounter } + STATUS current + DESCRIPTION + " This Notification indicates if PSE state diagram enters + the state ERROR_DELAY_SHORT. + At least 500 msec must elapse between notifications + being emitted by the same object instance." + ::= { dPoeMIBNotifications 3 } + + dPoeIfPdAliveFailOccurNotification NOTIFICATION-TYPE + OBJECTS { pethMainPseGroupIndex, + pethPsePortIndex, + dPoeIfPdAliveCfgPdIpType, + dPoeIfPdAliveCfgPdIpAddr + } + STATUS current + DESCRIPTION + " This Notification indicates if the PD device has + the stop working or no response problem." + ::= { dPoeMIBNotifications 4 } + +-- ***************************************************************************** +-- MIB Conformance statements +-- ***************************************************************************** + dPoeMIBCompliances OBJECT IDENTIFIER ::= { dPoeMIBConformance 1 } + + dPoeMIBGroups OBJECT IDENTIFIER ::= { dPoeMIBConformance 2 } + dPoeMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement the + DLINKSW-POE-MIB." + MODULE -- this module + MANDATORY-GROUPS { + dPoeGroupCfgGroup, + dPoeIfCfgGroup, + dPoeGroupInfoGroup, + dPoeIfInfoGroup, + dPoeIfErrorStateNotificationGroup, + dPoeIfPdAliveCfgGroup + } + + ::= { dPoeMIBCompliances 1 } + + dPoeGroupCfgGroup OBJECT-GROUP + OBJECTS { + dPoeGroupPolicyPreempt, + dPoeGroupIfLedMode + } + STATUS current + DESCRIPTION + "A collection of objects to configure or display the group-specific PoE information." + ::= { dPoeMIBGroups 1 } + + dPoeIfCfgGroup OBJECT-GROUP + OBJECTS { + dPoeGroupClearIfStatistic, + dPoeIfState, + dPoeIfMaxPower, + dPoeIfTimeRange, + dPoeIfLegacyPdEnabled + } + STATUS current + DESCRIPTION + "A collection of objects configure or display the ports information." + ::= { dPoeMIBGroups 2 } + + dPoeGroupInfoGroup OBJECT-GROUP + OBJECTS { + dPoeGroupMaxPorts, + dPoeGroupHWVersion, + dPoeGroupSWVersion + } + STATUS current + DESCRIPTION + "A collection of objects display the groups information." + ::= { dPoeMIBGroups 3 } + + dPoeIfInfoGroup OBJECT-GROUP + OBJECTS { + dPoeIfDetectStatus, + dPoeIfFaultyType, + dPoeIfVoltage, + dPoeIfCurrent, + dPoeIfTemperature, + dPoeIfPower + } + STATUS current + DESCRIPTION + "A collection of objects display the ports information." + ::= { dPoeMIBGroups 4 } + + dPoeIfErrorStateNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { dPoeIfPowerDeniedNotification, + dPoeIfPowerOverLoadNotification, + dPoeIfPowerShortCircuitNotification + } + STATUS current + DESCRIPTION "A collection of objects provides ports error state notifications." + ::= { dPoeMIBGroups 5 } + + dPoeIfPdAliveCfgGroup OBJECT-GROUP + OBJECTS { + dPoeIfPdAliveCfgState, + dPoeIfPdAliveCfgPdIpType, + dPoeIfPdAliveCfgPdIpAddr, + dPoeIfPdAliveCfgInterval, + dPoeIfPdAliveCfgRetry, + dPoeIfPdAliveCfgWaitTime, + dPoeIfPdAliveCfgAction + } + STATUS current + DESCRIPTION + "A collection of objects display the PD alive check configuration." + ::= { dPoeMIBGroups 6 } + +END -- cgit v1.2.3