From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/dragonwave/MWR-RADIO-MC-MIB | 663 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 663 insertions(+) create mode 100644 MIBS/dragonwave/MWR-RADIO-MC-MIB (limited to 'MIBS/dragonwave/MWR-RADIO-MC-MIB') diff --git a/MIBS/dragonwave/MWR-RADIO-MC-MIB b/MIBS/dragonwave/MWR-RADIO-MC-MIB new file mode 100644 index 0000000..19dcf04 --- /dev/null +++ b/MIBS/dragonwave/MWR-RADIO-MC-MIB @@ -0,0 +1,663 @@ + +-- File Name : MwrRadio-MC-MIB.mib +-- Version : 1.0.0 +-- Date : October 6, 2014 +-- Author : DragonWave Inc. + +MWR-RADIO-MC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, + Counter32, Counter64, Integer32 + FROM SNMPv2-SMI + DisplayString + FROM SNMPv2-TC + mwr + FROM DWI-HARMONY-PRIVATE-MIB + equipmentTrapInfo, equipmentOutTrapsCounter, equipmentAlarmActiveConditionId, EnableType + FROM EQUIPMENT-COMMON-MIB + mwrEventConfigSeverity, RadioInstanceType + FROM MWR-ETHERNET-MIB; + +mwrRadioMcModIdentity MODULE-IDENTITY + LAST-UPDATED "201406101023Z" + ORGANIZATION + "Dragonwave Inc." + CONTACT-INFO + "http://www.dragonwaveinc.com + 600-411 Legget Drive + Ottawa, Ontario + Canada, K2K 3C9 + + Tel : 613-599-9991 + Fax: 613-599-4265 + Support: 613-271-7010" + DESCRIPTION + "This specifies the contact information and the revision tracking information for the MIB module version." + + REVISION "201406231109Z" + DESCRIPTION + "First release of the Dragonwave Harmony radio Enhanced-multicarrier MIB." + + REVISION "201409231722Z" + DESCRIPTION + "Updated some OIDs Descriptions." +::= { mwr 1003 } + +mwrRadio OBJECT IDENTIFIER ::= { mwr 12 } +mwrEmcRadioConfigurations OBJECT IDENTIFIER ::= { mwrRadio 201 } +mwrEmcRadioStatus OBJECT IDENTIFIER ::= { mwrRadio 202 } +mwrEmcRadioPerformance OBJECT IDENTIFIER ::= { mwrRadio 203 } +mwrEmcRadioNotifications OBJECT IDENTIFIER ::= { mwrRadio 204 } + +mwrEmcRadioConfigurationsTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioConfigurationsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing radio configurations." + ::= { mwrEmcRadioConfigurations 1 } + +mwrEmcRadioConfigurationsEntry OBJECT-TYPE + SYNTAX MwrEmcRadioConfigurationsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing radio channel configurations." + INDEX { mwrEmcRadioConfigIndex } + ::= { mwrEmcRadioConfigurationsTable 1 } + +MwrEmcRadioConfigurationsEntry ::= SEQUENCE { + mwrEmcRadioConfigIndex + RadioInstanceType, + mwrEmcRadioTxState + EnableType, + mwrEmcRadioTxPower + Integer32, + mwrEmcRadioTxDownTime + Integer32, + mwrEmcRadioRxFrequency + Integer32, + mwrEmcRadioTxFrequency + Integer32 +} + +mwrEmcRadioConfigIndex OBJECT-TYPE + SYNTAX RadioInstanceType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each radio channel if applicable." + ::= { mwrEmcRadioConfigurationsEntry 1 } + +mwrEmcRadioTxState OBJECT-TYPE + SYNTAX EnableType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the transmit state of the radio channel." + ::= { mwrEmcRadioConfigurationsEntry 2 } + +mwrEmcRadioTxPower OBJECT-TYPE + SYNTAX Integer32 + UNITS "dB" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This defines the programmed transmit level of the radio channel. + The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dB. + Notes: + - Programmed and Actual transmit power may differ - see mwrEmcRadioActualTxPower." + ::= { mwrEmcRadioConfigurationsEntry 3 } + +mwrEmcRadioTxDownTime OBJECT-TYPE + SYNTAX Integer32 + UNITS "sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of time in seconds the radio transmitter is disabled when the mwrEmcRadioTxState is turned off. + - Make sure this is set before the mwrEmcRadioTxState is disabled. + - If the down time is set to 0, the radio will stay disabled until it is re-enabled again." + ::= { mwrEmcRadioConfigurationsEntry 4 } + +mwrEmcRadioRxFrequency OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the receive Radio frequency in kHz." + ::= { mwrEmcRadioConfigurationsEntry 5 } + +mwrEmcRadioTxFrequency OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the transmit Radio frequency in kHz." + ::= { mwrEmcRadioConfigurationsEntry 6 } + +mwrEmcRadioProfileTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing the radio profile configurations." + ::= { mwrEmcRadioConfigurations 2 } + +mwrEmcRadioProfileEntry OBJECT-TYPE + SYNTAX MwrEmcRadioProfileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing the radio profile configurations." + INDEX { mwrEmcRadioStandardMode, + mwrEmcRadioChannelBw, + mwrEmcRadioStaticTxProfile } + ::= { mwrEmcRadioProfileTable 1 } + +MwrEmcRadioProfileEntry ::= SEQUENCE { + mwrEmcRadioStandardMode + DisplayString, + mwrEmcRadioChannelBw + DisplayString, + mwrEmcRadioStaticTxProfile + DisplayString, + mwrEmcRadioProgrammedProfile + EnableType +} + +mwrEmcRadioStandardMode OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index representing the available standard mode of the radio channel." + ::= { mwrEmcRadioProfileEntry 1 } + +mwrEmcRadioChannelBw OBJECT-TYPE + SYNTAX DisplayString + UNITS "MHz" + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index representing the available channel bandwidth of the radio channel." + ::= { mwrEmcRadioProfileEntry 2 } + +mwrEmcRadioStaticTxProfile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index representing the available static tx profile of the radio channel." + ::= { mwrEmcRadioProfileEntry 3 } + +mwrEmcRadioProgrammedProfile OBJECT-TYPE + SYNTAX EnableType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the configured standard mode, channel BW and the TX profile of the radio channel." + ::= { mwrEmcRadioProfileEntry 4 } + +mwrEmcRadioThresholdAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioThresholdAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing the threshold alarm configurations of the radio channel." + ::= { mwrEmcRadioConfigurations 3 } + +mwrEmcRadioThresholdAlarmEntry OBJECT-TYPE + SYNTAX MwrEmcRadioThresholdAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing the threshold alarm configurations of the radio channel." + INDEX { mwrEmcRadioThresholdIndex } + ::= { mwrEmcRadioThresholdAlarmTable 1 } + +MwrEmcRadioThresholdAlarmEntry ::= SEQUENCE { + mwrEmcRadioThresholdIndex + RadioInstanceType, + mwrEmcRadioRslBelowThresholdParams + DisplayString, + mwrEmcRadioTxAboveThresholdParams + DisplayString +} + +mwrEmcRadioThresholdIndex OBJECT-TYPE + SYNTAX RadioInstanceType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each radio channel if applicable." + ::= { mwrEmcRadioThresholdAlarmEntry 1 } + +mwrEmcRadioRslBelowThresholdParams OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the RSL threshold in dB and the number of seconds the RSL should be below the threshold. + An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command." + ::= { mwrEmcRadioThresholdAlarmEntry 2 } + +mwrEmcRadioTxAboveThresholdParams OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Represents the radio transmit power threshold in dB and the number of seconds threshold must be exceeded. + An example of the format of the string is as follows: '-75 10'. The first parameter power level in dB, the second is the time in seconds. In this example the threshold -75 dB and the time is set to 10 seconds. The single quote marks are not used in the command." + ::= { mwrEmcRadioThresholdAlarmEntry 3 } + +mwrEmcRadioChCfgSynchEnable OBJECT-TYPE + SYNTAX EnableType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object enables or disables synchronization of the radio configuration on multiple carriers." + ::= { mwrEmcRadioConfigurations 4 } + +-- +-- RADIO INFORMATION +-- + +mwrEmcRadioStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing the status of the radio channel." + ::= { mwrEmcRadioStatus 1 } + +mwrEmcRadioStatusEntry OBJECT-TYPE + SYNTAX MwrEmcRadioStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing the status of the radio channel." + INDEX { mwrEmcRadioStatusIndex } + ::= { mwrEmcRadioStatusTable 1 } + +MwrEmcRadioStatusEntry ::= SEQUENCE { + mwrEmcRadioStatusIndex + RadioInstanceType, + mwrEmcRadioOperStatus + INTEGER, + mwrEmcRadioTRSpacing + Integer32, + mwrEmcRadioActualTxStatus + EnableType, + mwrEmcRadioRxFreqMin + Integer32, + mwrEmcRadioRxFreqMax + Integer32, + mwrEmcRadioTxFreqMin + Integer32, + mwrEmcRadioTxFreqMax + Integer32, + mwrEmcRadioTxPowerMin + Integer32, + mwrEmcRadioTxPowerMax + Integer32, + mwrEmcRadioLinkStatus + INTEGER +} + +mwrEmcRadioStatusIndex OBJECT-TYPE + SYNTAX RadioInstanceType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each radio channel if applicable." + ::= { mwrEmcRadioStatusEntry 1 } + +mwrEmcRadioOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up (1), + down (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the Radio. When radio is fully configured and ready to operate the status will be up." + ::= { mwrEmcRadioStatusEntry 2 } + +mwrEmcRadioTRSpacing OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the difference between the configured TX/RX center frequency of the radio channel." + ::= { mwrEmcRadioStatusEntry 3 } + +mwrEmcRadioActualTxStatus OBJECT-TYPE + SYNTAX EnableType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object defines the actual transmit state of the radio channel." + ::= { mwrEmcRadioStatusEntry 4 } + +mwrEmcRadioRxFreqMin OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the minimum radio RX frequency allowed." + ::= { mwrEmcRadioStatusEntry 5 } + +mwrEmcRadioRxFreqMax OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the maximum radio RX frequency allowed." + ::= { mwrEmcRadioStatusEntry 6 } + +mwrEmcRadioTxFreqMin OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the minimum radio TX frequency allowed." + ::= { mwrEmcRadioStatusEntry 7 } + +mwrEmcRadioTxFreqMax OBJECT-TYPE + SYNTAX Integer32 + UNITS "kHz" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the maximum radio TX frequency allowed." + ::= { mwrEmcRadioStatusEntry 8 } + +mwrEmcRadioTxPowerMin OBJECT-TYPE + SYNTAX Integer32 + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the minimum radio Transmit Power allowed." + ::= { mwrEmcRadioStatusEntry 9 } + +mwrEmcRadioTxPowerMax OBJECT-TYPE + SYNTAX Integer32 + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Represents the maximum radio Transmit Power allowed." + ::= { mwrEmcRadioStatusEntry 10 } + +mwrEmcRadioLinkStatus OBJECT-TYPE + SYNTAX INTEGER { + up (1), + down (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational status of the radio link." + ::= { mwrEmcRadioStatusEntry 11 } + +mwrEmcRadioPerfStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioPerfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing the performance of the radio channel." + ::= { mwrEmcRadioPerformance 1 } + +mwrEmcRadioPerfStatsEntry OBJECT-TYPE + SYNTAX MwrEmcRadioPerfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing the performance of the radio channel." + INDEX { mwrEmcRadioStatsIndex } + ::= { mwrEmcRadioPerfStatsTable 1 } + +MwrEmcRadioPerfStatsEntry ::= SEQUENCE { + mwrEmcRadioStatsIndex + RadioInstanceType, + mwrEmcRadioTxFrames + Counter64, + mwrEmcRadioRxGoodFrames + Counter64, + mwrEmcRadioRxErrsFrames + Counter64, + mwrEmcRadioRSL + Integer32, + mwrEmcRadioEqualizerStress + Integer32, + mwrEmcRadioSNR + Integer32, + mwrEmcRadioLinkAvailability + Counter32, + mwrEmcRadioActualTxPower + Integer32, + mwrEmcRadioActualTxProfile + DisplayString +} + +mwrEmcRadioStatsIndex OBJECT-TYPE + SYNTAX RadioInstanceType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each radio channel if applicable." + ::= { mwrEmcRadioPerfStatsEntry 1 } + +mwrEmcRadioTxFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current count of radio frames transmitted." + ::= { mwrEmcRadioPerfStatsEntry 2 } + +mwrEmcRadioRxGoodFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current count of good radio frames received." + ::= { mwrEmcRadioPerfStatsEntry 3 } + +mwrEmcRadioRxErrsFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current count of radio frames received in error." + ::= { mwrEmcRadioPerfStatsEntry 4 } + +mwrEmcRadioRSL OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An estimate of the radio RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB" + ::= { mwrEmcRadioPerfStatsEntry 5 } + +mwrEmcRadioEqualizerStress OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working." + ::= { mwrEmcRadioPerfStatsEntry 6 } + +mwrEmcRadioSNR OBJECT-TYPE + SYNTAX Integer32 + UNITS "dB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The absolute value of the estimate of the radio SNR. Divide the value by 10 to get the actual SNR." + ::= { mwrEmcRadioPerfStatsEntry 7 } + +mwrEmcRadioLinkAvailability OBJECT-TYPE + SYNTAX Counter32 + UNITS "sec" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time the radio link is up." + ::= { mwrEmcRadioPerfStatsEntry 8 } + +mwrEmcRadioActualTxPower OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the running configuration for tx power." + ::= { mwrEmcRadioPerfStatsEntry 9 } + +mwrEmcRadioActualTxProfile OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A read-only string specifying the actual value for the TX profile." + ::= { mwrEmcRadioPerfStatsEntry 10 } + +mwrEmcRadioPerfStats32BitTable OBJECT-TYPE + SYNTAX SEQUENCE OF MwrEmcRadioPerfStats32BitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table containing 32-bit counters of the radio channel. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters." + ::= { mwrEmcRadioPerformance 2 } + +mwrEmcRadioPerfStats32BitEntry OBJECT-TYPE + SYNTAX MwrEmcRadioPerfStats32BitEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry containing 32-bit counters of the radio channel." + INDEX { mwrEmcRadioStats32BitIndex } + ::= { mwrEmcRadioPerfStats32BitTable 1 } + +MwrEmcRadioPerfStats32BitEntry ::= SEQUENCE { + mwrEmcRadioStats32BitIndex + RadioInstanceType, + mwrEmcRadioTxFrames32Bit + Counter32, + mwrEmcRadioRxGoodFrames32Bit + Counter32, + mwrEmcRadioRxErrsFrames32Bit + Counter32 +} + +mwrEmcRadioStats32BitIndex OBJECT-TYPE + SYNTAX RadioInstanceType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique value for each radio channel if applicable." + ::= { mwrEmcRadioPerfStats32BitEntry 1 } + +mwrEmcRadioTxFrames32Bit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A low capacity 32-bit counter representing the current count of radio frames transmitted." + ::= { mwrEmcRadioPerfStats32BitEntry 2 } + +mwrEmcRadioRxGoodFrames32Bit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A low capacity 32-bit counter representing the current count of radio frames received." + ::= { mwrEmcRadioPerfStats32BitEntry 3 } + +mwrEmcRadioRxErrsFrames32Bit OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A low capacity 32-bit counter representing the current count of radio frames received in error." + ::= { mwrEmcRadioPerfStats32BitEntry 4 } + +-- +-- RADIO NOTIFICATIONS +-- + +mwrEmcRadioRxLossOfSync NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + mwrEmcRadioStatusIndex, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when radio link loses synchronization on its receiver. The mwrEmcRadioStatusIndex indicates each radio channel." + ::= { mwrEmcRadioNotifications 1 } + +mwrEmcRadioFailure NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + mwrEmcRadioStatusIndex, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when fault is detected in radio. The reason could be faulty components or invalid configuration. The mwrEmcRadioStatusIndex indicates each radio channel." + ::= { mwrEmcRadioNotifications 2 } + +mwrEmcRadioCalUnavailable NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when the calibration information is not available in the system." + ::= { mwrEmcRadioNotifications 3 } + +mwrEmcRadioRslBelowThreshold NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + mwrEmcRadioStatusIndex, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when the receive signal level of the radio link is below the user configured limit. The mwrEmcRadioStatusIndex indicates each radio channel." + ::= { mwrEmcRadioNotifications 4 } + +mwrEmcRadioTxlAboveThreshold NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + mwrEmcRadioStatusIndex, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when the radio transmit power level exceeds the user set limit. The mwrEmcRadioStatusIndex indicates each radio channel." + ::= { mwrEmcRadioNotifications 5 } + +mwrEmcRadioConfigMismatch NOTIFICATION-TYPE + OBJECTS { mwrEventConfigSeverity, + mwrEmcRadioStatusIndex, + equipmentAlarmActiveConditionId, + equipmentTrapInfo, + equipmentOutTrapsCounter } + STATUS current + DESCRIPTION + "This notification is raised when the radio configuration between the peers is mismatched." + ::= { mwrEmcRadioNotifications 6 } +END + -- cgit v1.2.3