From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/enterasys/CTRON-ALIAS-MIB | 1247 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1247 insertions(+) create mode 100644 MIBS/enterasys/CTRON-ALIAS-MIB (limited to 'MIBS/enterasys/CTRON-ALIAS-MIB') diff --git a/MIBS/enterasys/CTRON-ALIAS-MIB b/MIBS/enterasys/CTRON-ALIAS-MIB new file mode 100644 index 0000000..c2149b4 --- /dev/null +++ b/MIBS/enterasys/CTRON-ALIAS-MIB @@ -0,0 +1,1247 @@ +CTRON-ALIAS-MIB DEFINITIONS ::= BEGIN + +-- ctron-alias-mib.txt +-- +-- Part Number: +-- +-- + +-- This module provides authoritative definitions for Enterasys +-- Networks' Alias MIB. + +-- +-- This module will be extended, as needed. + +-- Enterasys Networks reserves the right to make changes in +-- specification and other information contained in this document +-- without prior notice. The reader should consult Enterasys Networks +-- to determine whether any such changes have been made. +-- +-- In no event shall Enterasys Networks be liable for any incidental, +-- indirect, special, or consequential damages whatsoever (including +-- but not limited to lost profits) arising out of or related to this +-- document or the information contained in it, even if Enterasys +-- Networks has been advised of, known, or should have known, the +-- possibility of such damages. +-- +-- Enterasys grants vendors, end-users, and other interested parties +-- a non-exclusive license to use this Specification in connection +-- with the management of Enterasys products. +-- +-- Copyright February, 1999-2013 Enterasys Networks, Inc. + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32, + TimeTicks + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, MacAddress, TruthValue + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + InterfaceIndex + FROM IF-MIB + TimeFilter + FROM RMON2-MIB + VlanIndex + FROM Q-BRIDGE-MIB + EnabledStatus + FROM P-BRIDGE-MIB + ctAliasMib + FROM CTRON-MIB-NAMES; + +cabletronAliasMib MODULE-IDENTITY + LAST-UPDATED "201302151430Z" -- Fri Feb 15 14:30 UTC 2013 + ORGANIZATION "Enterasys Networks, Inc" + CONTACT-INFO + "Postal: Enterasys Networks + 9 Northeastern Blvd. + Salem, NH 03079 USA + + Phone: +1 603 952 5000 + E-mail: support@enterasys.com + WWW: http://www.enterasys.com" + + DESCRIPTION + "This MIB module defines a portion of the MIB tree + under the Enterasys enterprise OID. This branch + defines Enterasys Networks' proprietary Node Alias + feature. + + This MIB defines objects which can be used to discover + end systems per port, and to map end system addresses + to the layer 2 address of the port." + + REVISION "201302151430Z" -- Fri Feb 15 14:30 UTC 2013 + DESCRIPTION "Added ctAliasInterfaceTable. Also added mdns, + llmnr, and ssdp as supported protocols." + + REVISION "201102141525Z" -- Mon Feb 14 15:25 UTC 2011 + DESCRIPTION "Added IPv6 as a supported protocol. + Added the CabletronProtocolBits TEXTUAL-CONVENTION + and ctAliasConfigurationProtocolEnableState + object." + + REVISION "200304221339Z" -- Tue Apr 22 13:39 GMT 2003 + DESCRIPTION "Added the ctAliasMacAddressTable and + ctAliasProtocolAddressTable. Added the objects + ctAliasEntryStatus and ctAliasEntryClearAll. + Deprecated the object ctAliasMarkInactive." + + REVISION "200201301301Z" -- Wed Jan 30 13:01 GMT 2002 + DESCRIPTION "Added the optional ctAliasConfigurationTable." + + REVISION "200201232056Z" -- Wed Jan 23 20:56 GMT 2002 + DESCRIPTION "Added ctAliasAddressText leaf with the syntax of + SnmpAdminString." + + REVISION "200201182022Z" -- Fri Jan 18 20:22 GMT 2002 + DESCRIPTION "Added textual convention AliasAddress. Changed + the syntax for ctAliasAddress from SnmpAdminString + to AliasAddress. Added ranges to ctAliasReference + and ctAliasID." + + REVISION "199909260000Z" + DESCRIPTION "Moved the CabletronProtocolTC enumeration value + unknown to unknown(0). Updated textual descriptions." + + REVISION "199909040000Z" + DESCRIPTION "Changed removed the ctAliasProtocolDirLocalID. + Updated units of conformance and compliance + statements." + + REVISION "199908060000Z" + DESCRIPTION "Changed object naming to be more cabletron-general. + Changed indexing to simplify access." + + REVISION "199907280000Z" + DESCRIPTION "The initial version of this MIB module" + + ::= { ctAliasMib 1 } + +-- Textual Conventions + +CabletronProtocolTC ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the type of protocol address." + SYNTAX INTEGER { + unknown(0), + ip(1), -- IPv4 + apl(2), + mac(3), + hsrp(4), + dhcps(5), + dhcpc(6), + bootps(7), + bootpc(8), + ospf(9), + vrrp(10), + ipx(11), + xrip(12), + xsap(13), + xnlsp(14), + ipx20(15), + rtmp(16), + netBios(17), + nbt(18), + n802q(19), + bgp(20), + rip(21), + igrp(22), + dec(23), + bpdu(24), + udp(25), + ipv6(26), + mdns(27), + llmnr(28), + ssdp(29) + } + +AliasAddress ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x " + STATUS current + DESCRIPTION + "Represents layer 3 or higher addresses." + SYNTAX OCTET STRING (SIZE (0..32)) + +CabletronProtocolBits ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The list of protocol types that can be enabled for + nodeAlias entries." + SYNTAX BITS { + unknown(0), + ipv4(1), + apl(2), + mac(3), + hsrp(4), + dhcps(5), + dhcpc(6), + bootps(7), + bootpc(8), + ospf(9), + vrrp(10), + ipx(11), + xrip(12), + xsap(13), + xnlsp(14), + ipx20(15), + rtmp(16), + netBios(17), + nbt(18), + n802q(19), + bgp(20), + rip(21), + igrp(22), + dec(23), + bpdu(24), + udp(25), + ipv6(26), + mdns(27), + llmnr(28), + ssdp(29) + } + + +-- branches used in this MIB + + ctAlias OBJECT IDENTIFIER ::= { cabletronAliasMib 1 } + +-- Alias Table + +ctAliasTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ctAliasTable contains information about the aliases + known by the agent. This table is indexed using a unique + and arbitrary ID and a TimeFilter to allow a management + station to learn all alias entries that have been modified + since time X. This table is NOT designed to do a single + GET. This Table is designed for MIB Walks only. + + This table contains objects that map upper-layer + network services and entities to the physical location + of the associated port, and the MAC address of the + associated end-system (node). + + All entries in this table are deleted when sysUpTime + is reset to zero. + + This table allows for a time filtered view. It is useful + for determining what has been modified in the Alias Table + since a specified time. + + If a management station reads the ctAliasTable + of an entity at time X, subsequent updates can be + realized by performing get-next requests of this + table to determine which entries have been modified + since time X. Then the management station can use + GET requests to retrieve only the records of interest + from the Alias table. + + There is a delay between retrieving the Alias Reference + values from this table, and a GET request to retrieve a + modified row from the Alias table. The management + station should be prepared for two possibilities: + 1) the GET request may fail if the Alias table entry + has been deleted during the delay, and 2) the + entry may have been modified during the delay, so the + modification time of the retrieved entry may differ from + the modification time of the Delta entry. + + If the entry in the Alias Control table identified by + ctAliasID is marked inactive by management request, and + subsequently deleted to free resources, all corresponding + entries in this table are also deleted. + + If the agent needs to free resources, it can delete + entries from this table. It SHOULD first remove those + which have been marked inactive in the ctAliasControlTable, + then it SHOULD remove those entries with the oldest + modification times." + ::= { ctAlias 1 } + +ctAliasEntry OBJECT-TYPE + SYNTAX CtAliasEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information pertaining to + the alias of a node." + INDEX { ctAliasTimeFilter, ctAliasReference } + ::= { ctAliasTable 1 } + +CtAliasEntry ::= + SEQUENCE + { + ctAliasTimeFilter TimeFilter, + ctAliasReference Integer32, + ctAliasInterface InterfaceIndex, + ctAliasMacAddress MacAddress, + ctAliasVlanID VlanIndex, + ctAliasProtocol CabletronProtocolTC, + ctAliasAddress AliasAddress, + ctAliasIsActive TruthValue, + ctAliasAddressText SnmpAdminString + } + +ctAliasTimeFilter OBJECT-TYPE + SYNTAX TimeFilter + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry + was last modified." + ::= { ctAliasEntry 1 } + +ctAliasReference OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An integer ID assigned by the agent. The value of this + object is equal to an existing ctAliasID." + ::= { ctAliasEntry 2 } + +ctAliasInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the interface on which this entry was + discovered. + + The ifIndex is an 'external value' that identifies a + physical component associated with the Alias entry. + This object can be used to identify the physical + location of the interface in the ifTable [RFC2863]. + + The possibility of ifIndex value re-assignment must be + accommodated by a management application whenever the + value of sysUpTime is reset to zero. + + Since ifIndex values in different 'naming scopes' are + not related to one another, the interface to physical + component associations are relative to the same + logical entity within the agent. For more discussion + of naming scopes, see the ENTITY-MIB [RFC2037]" + ::= { ctAliasEntry 3 } + +ctAliasMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address associated with this alias. + + The TEXTUAL-CONVENTION MacAddress is defined in + SNMPv2-TC as an 802 MAC address represented in + 'canonical' order as defined by IEEE 802.1a, + i.e., as if it were transmitted least significant + bit first." + ::= { ctAliasEntry 4 } + +ctAliasVlanID OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN ID contained in the header of the message + associated with this alias. + + On agents which support this MIB but do not support + VLANs, the value for this object MUST be (1)." + ::= { ctAliasEntry 5 } + +ctAliasProtocol OBJECT-TYPE + SYNTAX CabletronProtocolTC + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type of this alias address." + ::= { ctAliasEntry 6 } + +ctAliasAddress OBJECT-TYPE + SYNTAX AliasAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry. The exact + format of this object will depend upon the protocol + type in ctAliasProtocol. The value returned for + this object MUST be in a non-textual format." + ::= { ctAliasEntry 7 } + +ctAliasIsActive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. + + A true(1) value indicates the alias is active. + + A false(2) value indicates an entry which has + been marked inactive by network management, using the + ctAliasEntryStatus object in the ctAliasControlTable. + + Entries which have been marked inactive may remain in + the table to allow consistent mappings between network + management stations until an agent needs to free + resources." + ::= { ctAliasEntry 8 } + +ctAliasAddressText OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry in a human + readable textual format." + ::= { ctAliasEntry 9 } + +-- Alias Control Table + +ctAliasControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table allows for control of Alias entries. + + Currently control is limited to marking entries + as marked for deletion. + + If the entry in the Alias Control table identified by + ctAliasID is marked inactive by management request, and + subsequently deleted to free resources, all corresponding + entries in the ctAlias table are also deleted. + + All entries in this table are deleted when sysUpTime + is reset to zero." + + ::= { ctAlias 2 } + +ctAliasControlEntry OBJECT-TYPE + SYNTAX CtAliasControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains a unique identifier of an Alias + entry and a control object to mark the entry as + 'marked for deletion'." + INDEX { ctAliasID } + ::= { ctAliasControlTable 1 } + +CtAliasControlEntry ::= + SEQUENCE + { + ctAliasID Integer32, + ctAliasMarkInactive TruthValue, + ctAliasEntryStatus INTEGER + } + +ctAliasID OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique and arbitrary integer ID assigned + by the agent to identify this entry. + + Each identifier must not be reused until the agent + is re-initialized, i.e. sysUpTime is reset to zero." + ::= { ctAliasControlEntry 1 } + +ctAliasMarkInactive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This object provides the control to mark this entry + to inactive. + + When an entry is created by the agent, this is set to + false(2). A network management application can set this + value to true(1), indicating that the entry is no longer + needed. Once this object has been set to true(1), it + cannot be set to false(2). + + If the alias is detected again by the agent, the agent + may create a new entry for the Alias. + + When an agent needs to free up resources, it may choose + to delete those entries marked inactive." + ::= { ctAliasControlEntry 2 } + +ctAliasEntryStatus OBJECT-TYPE + SYNTAX INTEGER + { + active(1), + inactive(2), + remove(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object provides the control to remove or inactivate + entries that are no longer needed. + + active(1) - indicates that this entry is active. + + inactive(2) - indicates that this entry is no longer of any + interest and can be removed, as needed, by + the entity. If the alias is marked inactive + and is seen again by the agent, the alias + ID's status will be changed to active. + + remove(3) - indicates that the agent SHOULD immediately + remove the entry from the table. If the alias + is seen again by the agent after having been + removed, it will be added as a new aliasID." + ::= { ctAliasControlEntry 3 } + + +-- Alias Table Statistics + +ctAliasStats OBJECT IDENTIFIER ::= { ctAlias 3 } + +ctAliasTableStatsTotalEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of entries in the ctAliasControlTable." + ::= { ctAliasStats 1 } + +ctAliasTableStatsActiveEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of active entries in the + ctAliasControlTable." + ::= { ctAliasStats 2 } + +ctAliasTableStatsPurgeTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "System time of the most recent purge." + ::= { ctAliasStats 3 } + +ctAliasTableStatsState OBJECT-TYPE + SYNTAX INTEGER + { + notStarted(1), + ready(2), + full(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current Alias Table state. + + notStarted(1) indicates the agent has not + completed any required start up routines and + therefore the ctAliasTable and ctAliasControlTable + are not currently valid. + + ready(2) indicates that the agent has completed + all initialization procedures and that the alias + MIB is running properly. + + full(3) indicates that due to memory restrictions + on the agent, the ctaliasTable has reached the + maximum number of entries possible. + + NOTE: If an agent is using a circular queue design, + then the state of full(3) will never be set." + ::= { ctAliasStats 4 } + + +-- Alias Configuration + +ctAliasConfiguration OBJECT IDENTIFIER ::= { ctAlias 4 } + +ctAliasConfigurationSystemAllocatedEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of alias entries allocated." + ::= { ctAliasConfiguration 1 } + +ctAliasConfigurationSystemTotalEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of alias entries available to be allocated + for this system." + ::= { ctAliasConfiguration 2 } + +ctAliasConfigurationTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasConfigurationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to prevent any single chatty + port from monopolizing all of the available alias + buffers in the system by letting an administrator + tune each port." + ::= { ctAliasConfiguration 3 } + +ctAliasConfigurationEntry OBJECT-TYPE + SYNTAX CtAliasConfigurationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains an enable/disable control variable + and variables showing the number of maximum allowable + and currently used entries." + INDEX { ctAliasInterface } + ::= { ctAliasConfigurationTable 1 } + +CtAliasConfigurationEntry ::= + SEQUENCE + { + ctAliasConfigurationInterfaceTotalEntries Gauge32, + ctAliasConfigurationInterfaceMaxEntries Gauge32, + ctAliasConfigurationInterfaceEnableState EnabledStatus, + ctAliasConfigurationNumQueueWraps Counter32 + } + +ctAliasConfigurationInterfaceTotalEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of alias entries currently in + use by this ctAliasInterface." + ::= { ctAliasConfigurationEntry 1 } + +ctAliasConfigurationInterfaceMaxEntries OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object represents the maximum number of + alias entries in the ctAliasTable which were + created by this ctAliasInterface. When the object + ctAliasConfigurationInterfaceTotalEntries + equals this object, the next alias appearing + on this ctAliasInterface causes the oldest entry + created by this ctAliasInterface to be deleted. + The sum of this object across all ctAliasInterface + shall not exceed ctAliasConfigurationSystemTotalEntries. + If the value of this object is increased, then oldest + entry removal ceases until the maximum is reached + again. If management reduces the value of this + object, then, starting with the oldest, alias + entries are removed until the new number of + entries is reached." + ::= { ctAliasConfigurationEntry 2 } + +ctAliasConfigurationInterfaceEnableState OBJECT-TYPE + SYNTAX EnabledStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The enable state of the alias agent on this + ctAliasInterface." + DEFVAL { enabled } + ::= { ctAliasConfigurationEntry 3 } + +ctAliasConfigurationNumQueueWraps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents the number of times the queue for + this ctAliasConfigurationEntry has wrapped. Since circular + queues are used for storing the entries, when all allocated + entries are used, the oldest entries are reused, thus + creating a wrap condition. A value of zero indicates the + queue has not wrapped, except in the case that the counter + itself has wrapped." + ::= { ctAliasConfigurationEntry 4 } + +ctAliasConfigurationProtocolEnableState OBJECT-TYPE + SYNTAX CabletronProtocolBits + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A bit field of the protocol types where a set indicates the + detection of that protocol is enabled. A bit position with + a cleared bit indicates detection of that protocol is not + enabled." + ::= { ctAliasConfiguration 4 } + + +-- Alias Mac Address Table + +ctAliasMacAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasMacAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ctAliasMacAddressTable contains information about + the aliases known by the agent indexed by MAC address + and protocol. + + This table contains information that is identical to + the ctAliasTable, but it is instanced by MAC address + and protocol to allow management entities to search for + a MAC address and protocol, or part of a MAC address + and protocol, using a single SNMP GetNext request." + ::= { ctAlias 5 } + +ctAliasMacAddressEntry OBJECT-TYPE + SYNTAX CtAliasMacAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information pertaining to the alias + of a node in a table indexed by MAC address, protocol + type, protocol address, and alias ID." + INDEX { ctAliasMacAddress, ctAliasProtocol, + ctAliasAddress, ctAliasReference } + ::= { ctAliasMacAddressTable 1 } + +CtAliasMacAddressEntry ::= + SEQUENCE + { + ctAliasMacAddressInterface InterfaceIndex, + ctAliasMacAddressVlanID VlanIndex, + ctAliasMacAddressIsActive TruthValue, + ctAliasMacAddressAddressText SnmpAdminString, + ctAliasMacAddressTime TimeTicks + } + +ctAliasMacAddressInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the interface on which this entry was + discovered. + + The ifIndex is an 'external value' that identifies a + physical component associated with the Alias entry. + This object can be used to identify the physical + location of the interface in the ifTable [RFC2863]. + + The possibility of ifIndex value re-assignment must be + accommodated by a management application whenever the + value of sysUpTime is reset to zero. + + Since ifIndex values in different 'naming scopes' are + not related to one another, the interface to physical + component associations are relative to the same + logical entity within the agent. For more discussion + of naming scopes, see the ENTITY-MIB [RFC2037]" + ::= { ctAliasMacAddressEntry 1 } + +ctAliasMacAddressVlanID OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN ID contained in the header of the message + associated with this alias. + + On agents which support this MIB but do not support + VLANs, the value for this object MUST be (1)." + ::= { ctAliasMacAddressEntry 2 } + +ctAliasMacAddressIsActive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. + + A true(1) value indicates the alias is active. + + A false(2) value indicates an entry which has + been marked inactive by network management, using the + ctAliasEntryStatus object in the ctAliasControlTable. + + Entries which have been marked inactive may remain in + the table to allow consistent mappings between network + management stations until an agent needs to free + resources." + ::= { ctAliasMacAddressEntry 3 } + +ctAliasMacAddressAddressText OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry in a human + readable textual format." + ::= { ctAliasMacAddressEntry 4 } + +ctAliasMacAddressTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry was last modified." + ::= { ctAliasMacAddressEntry 5 } + + +-- Alias Protocol Address Table + +ctAliasProtocolAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasProtocolAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ctAliasProtocolAddressTable contains information + about the aliases known by the agent indexed by protocol + and address. + + This table contains information that is identical to the + ctAliasTable, but it is instanced by protocol and address + to allow management entities to search for a protocol and + address, or part of a protocol and address, using a + single SNMP GetNext request." + ::= { ctAlias 6 } + +ctAliasProtocolAddressEntry OBJECT-TYPE + SYNTAX CtAliasProtocolAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information pertaining to the alias + of a node in a table indexed by protocol type, protocol + address, MAC address, and alias ID." + INDEX { ctAliasProtocol, ctAliasAddress, + ctAliasMacAddress, ctAliasReference } + ::= { ctAliasProtocolAddressTable 1 } + +CtAliasProtocolAddressEntry ::= + SEQUENCE + { + ctAliasProtocolAddressInterface InterfaceIndex, + ctAliasProtocolAddressVlanID VlanIndex, + ctAliasProtocolAddressIsActive TruthValue, + ctAliasProtocolAddressAddressText SnmpAdminString, + ctAliasProtocolAddressTime TimeTicks + } + +ctAliasProtocolAddressInterface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ifIndex of the interface on which this entry was + discovered. + + The ifIndex is an 'external value' that identifies a + physical component associated with the Alias entry. + This object can be used to identify the physical + location of the interface in the ifTable [RFC2863]. + + The possibility of ifIndex value re-assignment must be + accommodated by a management application whenever the + value of sysUpTime is reset to zero. + + Since ifIndex values in different 'naming scopes' are + not related to one another, the interface to physical + component associations are relative to the same + logical entity within the agent. For more discussion + of naming scopes, see the ENTITY-MIB [RFC2037]" + ::= { ctAliasProtocolAddressEntry 1 } + +ctAliasProtocolAddressVlanID OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN ID contained in the header of the message + associated with this alias. + + On agents which support this MIB but do not support + VLANs, the value for this object MUST be (1)." + ::= { ctAliasProtocolAddressEntry 2 } + +ctAliasProtocolAddressIsActive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. + + A true(1) value indicates the alias is active. + + A false(2) value indicates an entry which has + been marked inactive by network management, using the + ctAliasEntryStatus object in the ctAliasControlTable. + + Entries which have been marked inactive may remain in + the table to allow consistent mappings between network + management stations until an agent needs to free + resources." + ::= { ctAliasProtocolAddressEntry 3 } + +ctAliasProtocolAddressAddressText OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry in a human + readable textual format." + ::= { ctAliasProtocolAddressEntry 4 } + +ctAliasProtocolAddressTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry was last modified." + ::= { ctAliasProtocolAddressEntry 5 } + + +-- Alias Table Clear object + +ctAliasEntryClearAll OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to remove all of the alias entries + from all of the tables. + + When set to true(1) all known aliases will be immediately + removed from all of their respective tables. + + A read will always return false(2)." + ::= { ctAlias 7 } + + +-- Alias Interface Table + + +ctAliasInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF CtAliasInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ctAliasInterfaceTable contains information about + the aliases known by the agent indexed by interface + address and alias ID. + + This table contains information that is identical to + the ctAliasTable, but it is instanced by interface address + and alias ID to allow management entities to search for + an interface address, using a single SNMP GetNext request." + ::= { ctAlias 8 } + +ctAliasInterfaceEntry OBJECT-TYPE + SYNTAX CtAliasInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information pertaining to the alias + of a node in a table indexed by interface address and + alias ID." + INDEX { ctAliasInterface, ctAliasReference } + ::= { ctAliasInterfaceTable 1 } + +CtAliasInterfaceEntry ::= + SEQUENCE + { + ctAliasInterfaceMacAddress MacAddress, + ctAliasInterfaceProtocol CabletronProtocolTC, + ctAliasInterfaceAddress AliasAddress, + ctAliasInterfaceVlanID VlanIndex, + ctAliasInterfaceIsActive TruthValue, + ctAliasInterfaceAddressText SnmpAdminString, + ctAliasInterfaceTime TimeTicks + } + +ctAliasInterfaceMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address associated with this alias. + + The TEXTUAL-CONVENTION MacAddress is defined in + SNMPv2-TC as an 802 MAC address represented in + 'canonical' order as defined by IEEE 802.1a, + i.e., as if it were transmitted least significant + bit first." + ::= { ctAliasInterfaceEntry 1 } + +ctAliasInterfaceProtocol OBJECT-TYPE + SYNTAX CabletronProtocolTC + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address type of this alias address." + ::= { ctAliasInterfaceEntry 2 } + +ctAliasInterfaceAddress OBJECT-TYPE + SYNTAX AliasAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry. The exact + format of this object will depend upon the protocol + type in ctAliasInterfaceProtocol. The value returned + for this object MUST be in a non-textual format." + ::= { ctAliasInterfaceEntry 3 } + +ctAliasInterfaceVlanID OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN ID contained in the header of the message + associated with this alias. + + On agents which support this MIB but do not support + VLANs, the value for this object MUST be (1)." + ::= { ctAliasInterfaceEntry 4 } + +ctAliasInterfaceIsActive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. + + A true(1) value indicates the alias is active. + + A false(2) value indicates an entry which has + been marked inactive by network management, using the + ctAliasEntryStatus object in the ctAliasControlTable. + + Entries which have been marked inactive may remain in + the table to allow consistent mappings between network + management stations until an agent needs to free + resources." + ::= { ctAliasInterfaceEntry 5 } + +ctAliasInterfaceAddressText OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address associated with this entry in a human + readable textual format." + ::= { ctAliasInterfaceEntry 6 } + +ctAliasInterfaceTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this entry was last modified." + ::= { ctAliasInterfaceEntry 7 } + +-- ------------------------------------------------------------- +-- Conformance Information +-- ------------------------------------------------------------- + +ctAliasConformance OBJECT IDENTIFIER + ::= { ctAliasMib 2 } + +ctAliasGroups OBJECT IDENTIFIER + ::= { ctAliasConformance 1 } + +ctAliasCompliances OBJECT IDENTIFIER + ::= { ctAliasConformance 2 } + +-- ------------------------------------------------------------- +-- units of conformance +-- ------------------------------------------------------------- + +ctAliasBasicGroup OBJECT-GROUP + OBJECTS { + ctAliasInterface, + ctAliasMacAddress, + ctAliasVlanID, + ctAliasProtocol, + ctAliasAddress, + ctAliasIsActive, + ctAliasAddressText + } + STATUS current + DESCRIPTION + "A collection of objects for the discovery and mapping + of end systems and aliases." + ::= { ctAliasGroups 1 } + +ctAliasStatsGroup OBJECT-GROUP + OBJECTS { + ctAliasTableStatsTotalEntries, + ctAliasTableStatsActiveEntries, + ctAliasTableStatsPurgeTime, + ctAliasTableStatsState + } + STATUS current + DESCRIPTION + "A collection of objects pertaining to discovery and mapping + of end systems and aliases." + ::= { ctAliasGroups 2 } + + +ctAliasControlGroup OBJECT-GROUP + OBJECTS { + ctAliasMarkInactive + } + STATUS deprecated + DESCRIPTION + "This group has been deprecated. See ctAliasControlGroupI." + ::= { ctAliasGroups 3 } + +ctAliasConfigurationGroup OBJECT-GROUP + OBJECTS { + ctAliasConfigurationSystemAllocatedEntries, + ctAliasConfigurationSystemTotalEntries, + ctAliasConfigurationInterfaceTotalEntries, + ctAliasConfigurationInterfaceMaxEntries, + ctAliasConfigurationInterfaceEnableState + } + STATUS deprecated + DESCRIPTION + "A collection of objects for configuring port buffer queues." + ::= { ctAliasGroups 4 } + +ctAliasMacAddressGroup OBJECT-GROUP + OBJECTS { + ctAliasMacAddressInterface, + ctAliasMacAddressVlanID, + ctAliasMacAddressIsActive, + ctAliasMacAddressAddressText, + ctAliasMacAddressTime + } + STATUS current + DESCRIPTION + "A collection of objects for the discovery and mapping + of end systems and aliases." + ::= { ctAliasGroups 5 } + +ctAliasProtocolAddressGroup OBJECT-GROUP + OBJECTS { + ctAliasProtocolAddressInterface, + ctAliasProtocolAddressVlanID, + ctAliasProtocolAddressIsActive, + ctAliasProtocolAddressAddressText, + ctAliasProtocolAddressTime + } + STATUS current + DESCRIPTION + "A collection of objects for the discovery and mapping + of end systems and aliases." + ::= { ctAliasGroups 6 } + +ctAliasControlGroupI OBJECT-GROUP + OBJECTS { + ctAliasEntryStatus + } + STATUS current + DESCRIPTION + "A collection of objects which make the Aliases accessible + using the TimeFilter TEXTUAL CONVENTION." + ::= { ctAliasGroups 7 } + +ctAliasGroup OBJECT-GROUP + OBJECTS { + ctAliasEntryClearAll + } + STATUS current + DESCRIPTION + "An object used for removing alias entries." + ::= { ctAliasGroups 8 } + +ctAliasConfigurationGroupI OBJECT-GROUP + OBJECTS { + ctAliasConfigurationNumQueueWraps + } + STATUS current + DESCRIPTION + "An object to indicate queue usage." + ::= { ctAliasGroups 9 } + +ctAliasConfigurationGroup2 OBJECT-GROUP + OBJECTS { + ctAliasConfigurationSystemAllocatedEntries, + ctAliasConfigurationSystemTotalEntries, + ctAliasConfigurationInterfaceTotalEntries, + ctAliasConfigurationInterfaceMaxEntries, + ctAliasConfigurationInterfaceEnableState, + ctAliasConfigurationProtocolEnableState + } + STATUS current + DESCRIPTION + "A collection of objects for configuring port buffer queues." + ::= { ctAliasGroups 10 } + +ctAliasInterfaceGroup OBJECT-GROUP + OBJECTS { + ctAliasInterfaceMacAddress, + ctAliasInterfaceProtocol, + ctAliasInterfaceAddress, + ctAliasInterfaceVlanID, + ctAliasInterfaceIsActive, + ctAliasInterfaceAddressText, + ctAliasInterfaceTime + } + STATUS current + DESCRIPTION + "A collection of objects for the discovery and mapping + of end systems and aliases." + ::= { ctAliasGroups 11 } + +-- ------------------------------------------------------------- +-- compliance statements +-- ------------------------------------------------------------- + +ctAliasCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device support of the + Cabletron Directory Alias feature." + + MODULE + MANDATORY-GROUPS { ctAliasBasicGroup, + ctAliasStatsGroup, + ctAliasGroup } + +-- an implementation which does not support the ctAliasControlGroup +-- will not allow for NMS management controlled garbage collection. + + ::= { ctAliasCompliances 1 } + +ctAliasCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device support of the + Cabletron Directory Alias feature." + + MODULE + MANDATORY-GROUPS { ctAliasBasicGroup, + ctAliasStatsGroup, + ctAliasGroup, + ctAliasMacAddressGroup, + ctAliasProtocolAddressGroup, + ctAliasControlGroupI, + ctAliasGroup, + ctAliasConfigurationGroupI, + ctAliasConfigurationGroup2, + ctAliasInterfaceGroup + } + ::= { ctAliasCompliances 2 } + +END -- cgit v1.2.3