From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/enterasys/CTRON-SSR-HARDWARE-MIB | 794 ++++++++++++++++++++++++++++++++++ 1 file changed, 794 insertions(+) create mode 100644 MIBS/enterasys/CTRON-SSR-HARDWARE-MIB (limited to 'MIBS/enterasys/CTRON-SSR-HARDWARE-MIB') diff --git a/MIBS/enterasys/CTRON-SSR-HARDWARE-MIB b/MIBS/enterasys/CTRON-SSR-HARDWARE-MIB new file mode 100644 index 0000000..7480543 --- /dev/null +++ b/MIBS/enterasys/CTRON-SSR-HARDWARE-MIB @@ -0,0 +1,794 @@ +CTRON-SSR-HARDWARE-MIB DEFINITIONS ::= BEGIN + +-- This module provides authoritative definitions for Cabletron's +-- enterprise-specific schema to access SSR Hardware configuration. +-- +-- This module will be extended, as required. + +-- Cabletron Systems reserves the right to make changes in +-- specification and other information contained in this document +-- without prior notice. The reader should consult Cabletron Systems +-- to determine whether any such changes have been made. +-- +-- In no event shall Cabletron Systems be liable for any incidental, +-- indirect, special, or consequential damages whatsoever (including +-- but not limited to lost profits) arising out of or related to this +-- document or the information contained in it, even if Cabletron +-- Systems has been advised of, known, or should have known, the +-- possibility of such damages. +-- +-- Cabletron grants vendors, end-users, and other interested parties +-- a non-exclusive license to use this Specification in connection +-- with the management of Cabletron products. + +-- Copyright June 1998-2000 Cabletron Systems + + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter64, TimeTicks + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ssrMibs + FROM CTRON-SSR-SMI-MIB; + +hardwareMIB MODULE-IDENTITY + LAST-UPDATED "200007170000Z" -- July 17, 2000 + ORGANIZATION + "Cabletron Systems, Inc." + CONTACT-INFO + "Enterasys Networks + 35 Industrial Way, P.O. Box 5005 + Rochester, NH 03867-0505 + (603) 332-9400 + support@enterasys.com + http://www.enterasys.com" + DESCRIPTION + "This module defines a schema to access SSR hardware configuration." + + REVISION "200007170000Z" + DESCRIPTION + "Add support for the Smart Switch 6000 2 Port Gigabit Backplane module + to the SSRModuleType for the Enterasys SSR product line" + + REVISION "200007150000Z" + DESCRIPTION + "Update contact information. This mib is found on Riverstone Networks RS product line + as well as Enterasys SSR product line" + + REVISION "200005310000Z" + DESCRIPTION + "Modify SSRPortConnectorType for GBIC connector in 4.0 and update sysHwModuleService + by appending the board serial number for 4.0 for RS-32000." + + REVISION "200003200000Z" + DESCRIPTION + "Add Firmware 4.0 support. 3200 series modules, gigabit modules with GBIC support." + + REVISION "9912300000Z" + DESCRIPTION + "Add Firmware 3.1 support. 16 port 10/100 TX, Gigabit over Copper, ATM OC-3, POS OC3/12." + + REVISION "9901200000Z" + DESCRIPTION + "Add Firmware 3.0 support. Add Backup control module status and last Hotswap event." + + REVISION "9808040000Z" + DESCRIPTION + "First Revision of SSR Hardware mib. " + ::= { ssrMibs 200 } + + -- InterfaceIndex contains the semantics of ifIndex and + -- should be used for any objects defined on other mib + -- modules that need these semantics. + + SSRInterfaceIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each interface + or interface sub-layer in the managed system. It is + recommended that values are assigned contiguously + starting from 1. The value for each interface sub- + layer must remain constant at least from one re- + initialization of the entity's network management + system to the next re-initialization." + SYNTAX INTEGER (0..65535) + + SSRModuleType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each module + type supported by the SSR series of products." + SYNTAX INTEGER { + controlModule(1), -- The Control Module type I + ether100TX(2), -- 10 or 100 Mbps Ethernet, 8 port RJ45 + ether100FX(3), -- 100 Mbps Ethernet Fiber + gigabitSX(4), -- Gigabit SX Fiber (1000 Mbps Ethernet) + gigabitLX(5), -- Gigabit LX Fiber (1000 Mbps Ethernet) + serial4port(6), -- WAN DS1 speed 4 ports + hssi(7), -- WAN DS3 speed 2 ports + unknown(8), -- unknown module detected + gigabitLLX(9), -- Gigabit LLX Fiber (1000 Mbps Ethernet) 2 port + none(10), -- no card present in slot + controlModule2(11), -- Control Module type II (Elan) + gigabitLLX2P(12), -- Gigabit LLX Fiber (1000 Mbps Ethernet) 1 port + serial2port(13), -- WAN DS1 2 ports + cmts1x4port(15), -- Cable Modem Termination System 1 downstream 4 upstream + fddi2port(16), + controlModule3(17), -- Control Module type III (Esprit) + serial4portCE(20), -- WAN 4 port Serial Compression & Encrpytion + ether100TX16port(21), -- 10 or 100 Mbps Ethernet 16 port + gigabitTX(22), -- Gigabit SX TX (1000 Mbps Ethernet over copper) + atm155(24), -- ATM 1.5-155 2 port with modular physical port connectors + sonet4PortOc3(25), -- Packet over SONET 4 ports Oc3 + sonet2PortOc12(26), -- Packet over SONET 2 ports Oc12 + gigabitFX4P(27), -- 4 Port Gigabit Ethernet short haul + gigabitFX4PGBIC(28), -- 4 Port Gigabit Ethernet with modular physical port connectors + gigabitFX2PGBIC(29), -- 2 Port Gigabit Ethernet with modular physical port connectors + gigabit6K2PBP(30), -- 2 Port Gigabit SS6000 Backplane port + + -- 32000 chasss modules + rbGigabit8PGBIC(503), -- 8 Port Gigabit Ethernet with modular physical port connectors + rbGigabit4PGBIC(504), -- 4 Port Gigabit Ethernet with modular physical port connectors + rbEther100TX24P(505), -- 24 Port 10/100 Mbps Ethernet RJ45 + rbEther100TC32P(506), -- 32 Port 10/100 Mbps Ethernet Telco + rbControlModule(507) -- 32000 Control Module + } + + SSRModuleStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Current state of module. online indicates the normal state. Offline indicates a powered off or failed + module. Modules may be powered off prior to hot swap." + SYNTAX INTEGER { + online(1), -- Module working normally + offline(2) -- Module is powered off + } + + SSRPortType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each physical port + type supported by the SSR series of products." + SYNTAX INTEGER { + etherFast(1), -- 10 Mbps Ethernet or 100 Mbps Fast Ethernet capable port + gigEther(2), -- Gigabit (1000 Mbps Ethernet) + hssi(3), -- WAN HSSI Interface + serial(4), -- WAN T1 High Speed Serial Interface + unknown(5), -- unknown Port Type + sonet(6), -- Synchronous Optical Network Interface + ds1(7), -- Digital Signal 1 aka T1 + ds3(8), -- Digital Signal 3 aka T3 + cmt(9), -- Cable Modem Termination Interface + e1(10), -- E1 Digital Signal + e3(11), -- E3 Digital Signal + fddi(12) -- FDDI port + } + + SSRPortConnectorType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A unique value, greater than zero, for each physical port + type supported by the SSR series of products" + SYNTAX INTEGER { + empty(0), -- Used for GBIC, No GBIC ( empty) + db9m(1), -- DB-9 Male connector + db9f(2), -- DB-9 Female connector + db15m(3), -- DB-15 Male connector + db15f(4), -- DB-15 Female connector + db25m(5), -- DB-25 Male connector + db25f(6), -- DB-25 Female connector + rj11(7), -- RJ-11 type jack + rj45(8), -- RJ-45 type jack, also known as MJ-8 + aui(9), -- AUI connector + ftypef(10), -- CATV F-Type Female connector + fiberScMM(11), -- Fiber optics SC connector MultiMode, female connector + v35(12), -- V.35 shared 60 pin connector, female connector + eia530(13), -- EIA 530 shared 60 pin connector, female connector + rs44x(14), -- RS-449/442 shared 60 pin connector, female connector + x21(15), -- X.21 shared 60 pin connector, female connector + hssi(16), -- HSSI 50 pin connector, female connector + unknown(17), -- unknown connector + fiberScSM(18), -- Fiber optics SC connector Single Mode, female + fiberMTRjMM(19), -- Fiber optics Female MTRJ connector, Single Mode, female connector + fiberMTRjSM(20), -- Fiber optics Female MTRJ connector, Single Mode, female connector + bncf(21), -- Coaxial BNC Female connector + bncm(22), -- Coaxial BNC Male connector + rj21(23), -- RJ-21 50 Pin Connector + fiberScSMLH(24) -- Fiber optics Single Mode, Long Haul + } + + SSRserviceType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A string that is unique to a module in production. This string + is used by Cabletron Service and Manufacturing as + to identify shipped inventory." + SYNTAX OCTET STRING (SIZE (0..7)) + + SSRmemorySize ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An integer that represents the size of memory in Megabytes. -1 + represents not-available or not-applicable value." + SYNTAX INTEGER (-1..2147483647) + + + SSRSwitchingFabricInfo ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A bit string that represents the status of Switching Fabric + in the shelf/chassis. Switching Fabric #1 is first 2 bits 0-1, + #2 is 2-3. + + For example, given a 16 slot SSR 8600 which has one + Switching Fabric in Switching Fabric Slot #1 + (lowest full length midplane slot) the + integer value 0x00000007 translates into (bits): + 0 0 0 0 0 1 1 1 + | | | | + | | | +--- switching fabric #1 is present + | | +----- switching fabric is primary + | + ------ switching fabric #2 is present + +--------- switching fabric is standby" + SYNTAX INTEGER (0..63) + + SSRCmLedState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A bit string that represents the status of the active Control Module. + Each LED occupies a bit. The value 1 indicates LED is on, 0 is off. + The integer value 0x00000015 translates into (bits): + 0 0 0 0 1 1 1 1 + | | | | + | | | +- System OK -- SYS OK + | | +--- Heartbeat -- HB + | +----- Error -- ERR + + ------ Diagnostic -- Diag" + SYNTAX INTEGER (0..15) + + SSRBackupCMState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A enumeration that represents the state of the backup control module. + + A backup control module prom will boot the system firmware to an + intermediate state and begins sending hello messages to the main cpu + and assume the monitor(3) state. If the prom does not boot the + backup control module, the active control module will report the + status as inactive(2). inactive(2) indicates a failed state as it + means the backup control module can not take over for the active + control module. + + If the main cpu fails to respond to the backup control module's + periodic status checks and the backup control module is in the + standby(3) state, the backup control module will reset the active + control module, then reset all line cards and then finish a normal + boot sequence so that it becomes the master. At this point, the + value of this object is active(5). + + Flows in the hardware must be reprogrammed and all control protocols + will have to reestablish. An enterprise trap may also be sent. + + Normally, slot: CM will be the primary control module. CM/1 is + the slot for the backup control module. If some other line card + exists in slot CM/1 or no card exists, the state of this object + is notInstalled(4)." + SYNTAX INTEGER { + unknown(1), -- status unavailable to snmp agent + inactive(2), -- backup control module is offline + standby(3), -- CM in backup slot CM/1 is standby + notInstalled(4), -- no backup cm installed in Slot: cm/1 + active(5) -- CM in backup slot CM/1 is active + } + +-- ### groups ### + +sysHwGroup OBJECT IDENTIFIER ::= { ssrMibs 1 } + + sysHwNumSlots OBJECT-TYPE + SYNTAX INTEGER (0..64) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of slots present in the Shelf/Chassis." + ::= { sysHwGroup 1 } + + -- the Slot Table + + -- The Slot table contains information on the entity's + -- plugged in modules. Each slot can have a module plugged in with + -- different network interfaces and versions. + -- The system show hardware command reports the same data as this table + + sysHwModuleTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysHwModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of module entries." + ::= { sysHwGroup 2 } + + sysHwModuleEntry OBJECT-TYPE + SYNTAX SysHwModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information applicable + to a particular module." + INDEX { sysHwModuleSlotNumber} + ::= { sysHwModuleTable 1 } + + SysHwModuleEntry ::= + SEQUENCE { + sysHwModuleSlotNumber INTEGER, + sysHwModuleType SSRModuleType, + sysHwModuleDesc OCTET STRING, + sysHwModuleNumPorts INTEGER, + sysHwModuleVersion OCTET STRING, + sysHwModuleMemory SSRmemorySize, + sysHwModuleService SSRserviceType, + sysHwModuleStatus SSRModuleStatus + } + + sysHwModuleSlotNumber OBJECT-TYPE + SYNTAX INTEGER (1..65) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical slot number of the module in the Shelf/Chassis." + ::= { sysHwModuleEntry 1 } + + sysHwModuleType OBJECT-TYPE + SYNTAX SSRModuleType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical module type." + ::= { sysHwModuleEntry 2 } + + sysHwModuleDesc OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The description of the module with it's version number etc. + For the Control Module it should have the software version, the + amount of dynamic RAM, flash RAM." + ::= { sysHwModuleEntry 3 } + + sysHwModuleNumPorts OBJECT-TYPE + SYNTAX INTEGER (0..256) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of physical ports on this Card/Module." + ::= { sysHwModuleEntry 4 } + + sysHwModuleVersion OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The alpha-numeric version string for this Card/Module." + ::= { sysHwModuleEntry 5 } + + sysHwModuleMemory OBJECT-TYPE + SYNTAX SSRmemorySize + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "System Memory size available on the Module. Reports + -1 if no memory exists on this module, such as power supplies." + ::= { sysHwModuleEntry 6 } + + + sysHwModuleService OBJECT-TYPE + SYNTAX SSRserviceType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Cabletron service identifier string for this Card/Module.The board serial + number is appended to the string too." + ::= { sysHwModuleEntry 8 } + + sysHwModuleStatus OBJECT-TYPE + SYNTAX SSRModuleStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current status of this module, online or offline." + ::= { sysHwModuleEntry 9 } + + -- the Module Port Table + + -- The Module table contains information on the entity's + -- ports belonging to various modules. + + sysHwPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF SysHwPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of module entries." + ::= { sysHwGroup 3 } + + sysHwPortEntry OBJECT-TYPE + SYNTAX SysHwPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing management information applicable + to a particular module." + INDEX { sysHwPortSlotNumber, sysHwPortNumber} + ::= { sysHwPortTable 1 } + + SysHwPortEntry ::= + SEQUENCE { + sysHwPortSlotNumber INTEGER, + sysHwPortNumber INTEGER, + sysHwPortType SSRPortType, + sysHwPortConnectorType SSRPortConnectorType, + sysHwPortIfIndex SSRInterfaceIndex + } + + sysHwPortSlotNumber OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical slot number of the module in the Chassis." + ::= { sysHwPortEntry 1 } + + sysHwPortNumber OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the physical port in the Card/Module." + ::= { sysHwPortEntry 2 } + + sysHwPortType OBJECT-TYPE + SYNTAX SSRPortType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical port type." + ::= { sysHwPortEntry 3 } + + sysHwPortConnectorType OBJECT-TYPE + SYNTAX SSRPortConnectorType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical port connector type." + ::= { sysHwPortEntry 4 } + + sysHwPortIfIndex OBJECT-TYPE + SYNTAX SSRInterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of ifIndex used to access this port in the Interface MIB." + ::= { sysHwPortEntry 5 } + + + -- SSR 8 system hardware group + + PowerSupplyBits ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The encoding of the bits are as follows : + Each power supply in the system is represented by two bits. + The lower bit reflecting the presence of the power supply and + the higher bit representing it's state. A 1 reflects a properly + working power supply a 0 one which is down. + This encoding allows for a maximum of 16 power supplies. + + For example : + The integer value 0x00000007 translates into + + 0 0 0 0 0 1 1 1 in bits + | | | | + | | | +- power supply 1 is present + | | +--- power supply 1 is working normally + | +----- power supply 2 is present + +------- power supply 2 is down" + SYNTAX INTEGER (0..255) + + sysHwPowerSupply OBJECT-TYPE + SYNTAX PowerSupplyBits + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number and status of power supplies powering the Shelf/Chassis." + ::= { sysHwGroup 4 } + + sysHwFan OBJECT-TYPE + SYNTAX INTEGER { + working (1), + notWorking(2), + unknown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the fans located inside the Shelf/Chassis." + ::= { sysHwGroup 5 } + + sysHwTemperature OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + outOfRange(2), + unknown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current temperature status of the Shelf/Chassis." + ::= { sysHwGroup 6 } + + -- Chassis Id + + sysHwChassisId OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Operator defined serial number for this particular chassis/shelf." + ::= { sysHwGroup 7 } + + sysHwSwitchingFabric OBJECT-TYPE + SYNTAX SSRSwitchingFabricInfo + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of Switching Fabric in shelf/chassis." + ::= { sysHwGroup 19 } + + sysHwControlModuleLED OBJECT-TYPE + SYNTAX SSRCmLedState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of the shelf/chassis Active Control Module's four LED displays." + ::= { sysHwGroup 20 } + + sysHwControlModuleBackupState OBJECT-TYPE + SYNTAX SSRBackupCMState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of the the backup Control Module as interpreted from the + active control module. CLI: system show hardware will present + the following data: Redundant CPU slot : Not present" + ::= { sysHwGroup 21 } + + sysHwLastHotSwapEvent OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last hotswap of a physical module event occured." + ::= { sysHwGroup 22 } + +-- Deprecated Variables Aggregation Counter Group + + sysHwTotalInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of octets into the switch." + ::= { sysHwGroup 10 } + + sysHwTotalOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of octets out of the switch." + ::= { sysHwGroup 11 } + + sysHwTotalInFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of frames into the switch." + ::= { sysHwGroup 12 } + + sysHwTotalOutFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of frames out of the switch." + ::= { sysHwGroup 13 } + + sysHwTotalL2SwitchedFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current number of frames switched at Layer 2 (transport)." + ::= { sysHwGroup 14 } + + sysHwTotalL3SwitchedFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current number of frames switched at IETF Layers 3 (transport) and + 4 (application)." + ::= { sysHwGroup 15 } + + +-- ### Compliance ### + +hwConformance OBJECT IDENTIFIER ::= { hardwareMIB 2 } +hwCompliances OBJECT IDENTIFIER ::= { hwConformance 1 } +hwGroups OBJECT IDENTIFIER ::= { hwConformance 2 } + +hwComplianceV10 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SSR-HARDWARE-MIB." + MODULE -- this module + MANDATORY-GROUPS { hwConfGroupV10 } + ::= { hwConfGroupV10 1 } + +hwComplianceV11 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SSR-HARDWARE-MIB." + MODULE -- this module + MANDATORY-GROUPS { hwConfGroupV11 } + ::= { hwConfGroupV11 2 } + +hwComplianceV12 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for the SSR-HARDWARE-MIB." + MODULE -- this module + MANDATORY-GROUPS { hwConfGroupV11 } + ::= { hwConfGroupV11 3 } + +hwComplianceV30 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for the SSR-HARDWARE-MIB." + MODULE -- this module + MANDATORY-GROUPS { hwConfGroupV30 } + ::= { hwConfGroupV11 4 } + +hwConfGroupV10 OBJECT-GROUP + OBJECTS { + sysHwNumSlots, + sysHwModuleSlotNumber, + sysHwModuleType, + sysHwModuleDesc, + sysHwModuleNumPorts, + sysHwModuleVersion, + sysHwPortSlotNumber, + sysHwPortNumber, + sysHwPortType, + sysHwPortConnectorType, + sysHwPortIfIndex, + sysHwPowerSupply, + sysHwFan, + sysHwTemperature, + sysHwChassisId, + sysHwTotalInOctets, + sysHwTotalOutOctets, + sysHwTotalInFrames, + sysHwTotalOutFrames, + sysHwTotalL2SwitchedFrames, + sysHwTotalL3SwitchedFrames +} + STATUS deprecated + DESCRIPTION + "A set of managed objects that make up version 1.0 of the SSR Hardware mib." + ::= { hwGroups 1 } + +hwConfGroupV11 OBJECT-GROUP + OBJECTS { + sysHwNumSlots, + + sysHwModuleSlotNumber, + sysHwModuleType, + sysHwModuleDesc, + sysHwModuleNumPorts, + sysHwModuleVersion, + sysHwModuleMemory, + sysHwModuleService, + + sysHwPortSlotNumber, + sysHwPortNumber, + sysHwPortType, + sysHwPortConnectorType, + sysHwPortIfIndex, + + sysHwPowerSupply, + sysHwFan, + sysHwTemperature, + sysHwChassisId, + + sysHwSwitchingFabric, + sysHwControlModuleLED +} + STATUS deprecated + DESCRIPTION + "A set of managed objects that make up version 1.1 of the SSR Hardware mib." + ::= { hwGroups 2 } + + +hwConfGroupV12 OBJECT-GROUP + OBJECTS { + sysHwNumSlots, + + sysHwModuleSlotNumber, + sysHwModuleType, + sysHwModuleDesc, + sysHwModuleNumPorts, + sysHwModuleVersion, + sysHwModuleMemory, + sysHwModuleService, + sysHwModuleStatus, + + sysHwPortSlotNumber, + sysHwPortNumber, + sysHwPortType, + sysHwPortConnectorType, + sysHwPortIfIndex, + + sysHwPowerSupply, + sysHwFan, + sysHwTemperature, + sysHwChassisId, + + sysHwSwitchingFabric, + sysHwControlModuleLED +} + STATUS deprecated + DESCRIPTION + "A set of managed objects that make up version 1.2 of the SSR Hardware mib." + ::= { hwGroups 3 } + + +hwConfGroupV30 OBJECT-GROUP + OBJECTS { + sysHwNumSlots, + sysHwModuleSlotNumber, + sysHwModuleType, + sysHwModuleDesc, + sysHwModuleNumPorts, + sysHwModuleVersion, + sysHwModuleMemory, + sysHwModuleService, + sysHwModuleStatus, + + sysHwPortSlotNumber, + sysHwPortNumber, + sysHwPortType, + sysHwPortConnectorType, + sysHwPortIfIndex, + + sysHwPowerSupply, + sysHwFan, + sysHwTemperature, + sysHwChassisId, + + sysHwSwitchingFabric, + sysHwControlModuleLED, + sysHwControlModuleBackupState, + sysHwLastHotSwapEvent +} + STATUS current + DESCRIPTION + "A set of managed objects that make up version 3.0 of the SSR Hardware mib." + ::= { hwGroups 4 } + +END -- cgit v1.2.3