From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/fs/GBNDeviceSwitch-MIB | 2796 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2796 insertions(+) create mode 100644 MIBS/fs/GBNDeviceSwitch-MIB (limited to 'MIBS/fs/GBNDeviceSwitch-MIB') diff --git a/MIBS/fs/GBNDeviceSwitch-MIB b/MIBS/fs/GBNDeviceSwitch-MIB new file mode 100644 index 0000000..5fcb8cf --- /dev/null +++ b/MIBS/fs/GBNDeviceSwitch-MIB @@ -0,0 +1,2796 @@ + GBNDeviceSwitch-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, IpAddress, + NOTIFICATION-TYPE FROM SNMPv2-SMI + + DisplayString, MacAddress, + RowStatus, TruthValue,DateAndTime FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + + gbnDevice FROM ADMIN-MASTER-MIB + + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + + VlanIndex FROM Q-BRIDGE-MIB + + PortList, dot1qStaticMulticastEntry FROM Q-BRIDGE-MIB; + + gbnDeviceSwitch MODULE-IDENTITY + LAST-UPDATED "0011020000Z" -- November 2, 2000 + ORGANIZATION "Admin Co., Ltd." + CONTACT-INFO "Admin Co., Ltd. + E-mail: support@admin.com" + + DESCRIPTION "ADMIN Common Enterprise MIB definition." + + REVISION "0011020000Z" -- November 2, 2000 + DESCRIPTION "Initial MIB creation." + + ::= { gbnDevice 1 } + +MirrorMacType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "null、destination、source" + SYNTAX INTEGER { null(0), destination (1), source(2) } + +------------------------------------------------------------------------------ +-- define groups in gbnDeviceSwitch-MIB +------------------------------------------------------------------------------ + gbnDeviceSwitchMirror OBJECT IDENTIFIER ::= { gbnDeviceSwitch 1 } + gbnDeviceSwitchPort OBJECT IDENTIFIER ::= { gbnDeviceSwitch 2 } + gbnDeviceSwitchAggregation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 3 } + gbnDeviceSwitchL3 OBJECT IDENTIFIER ::= { gbnDeviceSwitch 4 } + gbnDeviceSwitchLoopTest OBJECT IDENTIFIER ::= { gbnDeviceSwitch 5 } + gbnDeviceSwitchSRM OBJECT IDENTIFIER ::= { gbnDeviceSwitch 6 } + gbnDeviceSwitchFlowAlarm OBJECT IDENTIFIER ::= { gbnDeviceSwitch 7 } + gbnDeviceSwitchQueneScheduer OBJECT IDENTIFIER ::= { gbnDeviceSwitch 8 } + gbnDeviceSwitchLineRate OBJECT IDENTIFIER ::= { gbnDeviceSwitch 9 } + gbnDeviceSwitchPortIsolation OBJECT IDENTIFIER ::= { gbnDeviceSwitch 10 } + gbnDeviceSwitchStormControl OBJECT IDENTIFIER ::= { gbnDeviceSwitch 11 } + gbnDeviceSwitchAntiDos OBJECT IDENTIFIER ::= { gbnDeviceSwitch 12 } + gbnDeviceSwitchBandWidth OBJECT IDENTIFIER ::= { gbnDeviceSwitch 13 } + gbnDeviceSwitchHigigStatistics OBJECT IDENTIFIER ::= { gbnDeviceSwitch 14 } + gbnDeviceSwitchChannelStats OBJECT IDENTIFIER ::= { gbnDeviceSwitch 15 } + gbnDeviceSwitchRmoteMirror OBJECT IDENTIFIER ::= { gbnDeviceSwitch 16 } + gbnDeviceSwitchPortSFPInfo OBJECT IDENTIFIER ::= { gbnDeviceSwitch 17 } + gbnDeviceSwitchPortAvgRate OBJECT IDENTIFIER ::= { gbnDeviceSwitch 18 } + gbnDeviceSwitchPortbandwidthUtilization OBJECT IDENTIFIER ::= { gbnDeviceSwitch 19 } +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchMirror - Mirror Group +-- +------------------------------------------------------------------------------ + mirroringPort OBJECT-TYPE + SYNTAX INTEGER (0..26) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This port which all packets send to." + ::= { gbnDeviceSwitchMirror 1 } + + mirroredEgrPort OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The egress ports which need to monitor." + ::= { gbnDeviceSwitchMirror 2 } + + mirroredIgrPort OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ingress ports which need to monitor." + ::= { gbnDeviceSwitchMirror 3 } + + ingressMirrorMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MAC address which will be compared with the ingress frame, Only the matched frame will be mirrored" + --用于匹配ingress报文的MAC地址 + ::= { gbnDeviceSwitchMirror 4 } + + egressMirrorMac OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MAC address which will be compared with the egress frame, Only the matched frame will be mirrored" + --用于匹配egress报文的MAC地址 + ::= { gbnDeviceSwitchMirror 5 } + + ingressMirrorMacType OBJECT-TYPE + SYNTAX MirrorMacType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The destination or source MAC address which will be compared with the ingress frame" + --指定用于匹配ingress报文的是目的还是源MAC地址 + ::= { gbnDeviceSwitchMirror 6 } + + egressMirrorMacType OBJECT-TYPE + SYNTAX MirrorMacType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The destination or source MAC address which will be compared with the egress frame" + --指定用于匹配egress报文的是目的还是源MAC地址 + ::= { gbnDeviceSwitchMirror 7 } + + ingressMirrorDivider OBJECT-TYPE + SYNTAX INTEGER(0..1023) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "the mirror sampling divider" + --ingress报文的采样值 + ::= { gbnDeviceSwitchMirror 8 } + + egressMirrorDivider OBJECT-TYPE + SYNTAX INTEGER(0..1023) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "the mirror sampling divider" + --egress报文的采样值 + ::= { gbnDeviceSwitchMirror 9 } + + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchPort - Port Group +-- +------------------------------------------------------------------------------ + portTypeTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of switch interfaces and associated properties." + ::= { gbnDeviceSwitchPort 1 } + + portTypeEntry OBJECT-TYPE + SYNTAX PortTypeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for switch interface control and status information." + INDEX { portNumber } + ::= { portTypeTable 1 } + + PortTypeEntry ::= SEQUENCE { + portNumber INTEGER, + portType INTEGER + + } + + portNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "the index of port." + ::= { portTypeEntry 1 } + + portType OBJECT-TYPE + SYNTAX INTEGER { + blank(1), + FE(2), + single100FX(3), + double100FX(4), + single1000FX(5), + double1000FX(6), + fE1000(7), + cpu(8), + FX10000(9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "端口类型:1为不存在；2为10/100M电口；3为100M单模光口； + 4为100M多模光口；5为1000M光口；6为1000M光口； + 7为1000M电口; 8为CPU接口;9为10000M光口" + ::= { portTypeEntry 2 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchAggregation - Port Trunk Group +-- +------------------------------------------------------------------------------ + aggTable OBJECT-TYPE + SYNTAX SEQUENCE OF AggEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A table that contains information about every + Aggregator that is associated with this System." + ::= { gbnDeviceSwitchAggregation 1 } + + aggEntry OBJECT-TYPE + SYNTAX AggEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A list of the Aggregator parameters. This is indexed + by the ifIndex of the Aggregator." + INDEX { aggUnit, aggPort } + ::= { aggTable 1 } + + AggEntry ::= + SEQUENCE { + aggUnit + INTEGER, + aggPort + INTEGER, + aggPortListPorts + PortList, + aggRule + INTEGER, + aggRowstatus + RowStatus + } + + aggUnit OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The Interface Unit of the Aggregation." + ::= { aggEntry 1 } + + aggPort OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The MasterPort of the Aggregation." + ::= { aggEntry 2 } + + aggPortListPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "The complete set of ports currently associated with + this Aggregator. Each bit set in this list represents + an Actor Port member of this Link Aggregation." + ::= { aggEntry 3 } + + aggRule OBJECT-TYPE + SYNTAX INTEGER { + srcMAC(1), + destMAC(2), + srcXORDestMAC(3), + srcIP(4), + destIP(5), + srcXORDestIP(6) + } + ACCESS read-write + STATUS obsolete + DESCRIPTION + " The Rule to be applied to this Link Aggregator's Trunk Group + Table. The rules are based on the following selections SrcMAC (1), + means that the last three bits of the Source MAC Address are used to + index the Trunk Group to get the destination port. DestMAC (2), means + the last three bits of the Destination MAC Address are used to index + into the Trunk Group to get the destination port. SrcXORDestMAC (3), + means that the last three bits of the Source MAC Address are logically + XORed with the last three bits of the Destination MAC Address and used + to index into the Trunk Group to get the destination port. SrcIP (4), + means the last three bits of the Source IP Address are used to index + into the Trunk Group to get the destination port. DestIP (5), means + the last three bits of the Destination IP Address are used to index + into the Trunk Group to get the destination port. SrcXORDestIP (6), + means the last three bits of the Source IP Address are logically XORed + with the last three bits of the Destination IP Address and used to + index into the Trunk Group to get the destination port. This rule + defines the distribution algorithm applied to the aggregated link." + ::= { aggEntry 4 } + + aggRowstatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "rowstatus of trunk." + ::= { aggEntry 5 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchL3 - L3 Group +-- +------------------------------------------------------------------------------ + l3Table OBJECT-TYPE + SYNTAX SEQUENCE OF L3Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "此表为交换芯片的L3表项内容。" + ::= { gbnDeviceSwitchL3 1 } + + l3Entry OBJECT-TYPE + SYNTAX L3Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "交换芯片的L3表项，此表为只读。" + INDEX { l3IpAddress } + ::= { l3Table 1 } + + L3Entry ::= + SEQUENCE { + l3IpAddress IpAddress, + l3NextHopMacAddress MacAddress, + l3Vlan VlanIndex, + l3Port INTEGER, + l3CreateTime DateAndTime, + l3UpdateTime DateAndTime + } + + l3IpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "目的IP地址，作为索引。" + ::= { l3Entry 1 } + + l3NextHopMacAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION "下一跳IP的MAC地址。" + ::= { l3Entry 2 } + + l3Vlan OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION "下一跳IP所在的VLAN。" + ::= { l3Entry 3 } + + l3Port OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "报文的出端口。" + ::= { l3Entry 4 } + + l3CreateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Create Time,such as 2004-07-29,13:30:15.0" + ::= { l3Entry 5 } + + l3UpdateTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Update Time,such as 2004-07-29,13:30:15.0" + ::= { l3Entry 6 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchLoopTest - Loop Test Group +-- +------------------------------------------------------------------------------ + loopTestPortno OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "port bitmap:Numbers of the port to be tested. + The highest bit is port 1, the second bit is port 2, and so on." + ::= { gbnDeviceSwitchLoopTest 1 } + + loopTestType OBJECT-TYPE + SYNTAX INTEGER { + noop(1), -- no operation + local(2), -- for both vdsl and ethernet port + remote(3), -- for both vdsl and ethernet port + other(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "DURABLE: { 4 } + Setting this object to 2-4 enables loop back test. + Setting it to 1 disables loop back test." + ::= { gbnDeviceSwitchLoopTest 2 } + + loopTestSuccess OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "if the highest bit is + 0:the port 1 loop fail, + 1,the port 1 loop success, + and so on. + " + ::= { gbnDeviceSwitchLoopTest 3 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchSRM - SRM Group +-- +------------------------------------------------------------------------------ + srmHardwareEnable OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Add network routes to hardware table or not.Default is enable." + -- "是否下发网段路由到硬件表中。默认为下发。" + ::= { gbnDeviceSwitchSRM 1 } + + srmHardwareDEFCPU OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "The DEF routes goes to CPU." + -- "硬件查找失败的路由发送到CPU，此功能只有TiNet S3750支持，默认为disable" + ::= { gbnDeviceSwitchSRM 2 } +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchFlowAlarm - Port Flow Alarm Group +-- +------------------------------------------------------------------------------ + portFlowAlarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortFlowAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Table of port flow alarm." + --端口流量告警表 + ::= { gbnDeviceSwitchFlowAlarm 1 } + + portFlowAlarmEntry OBJECT-TYPE + SYNTAX PortFlowAlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of port flow alarm." + --端口流量告警列表 + INDEX { portFlowAlarmPort } + ::= { portFlowAlarmTable 1 } + + PortFlowAlarmEntry ::= SEQUENCE { + portFlowAlarmPort Integer32, + portFlowAlarmEnable TruthValue, + portFlowAlarmExceedStatus TruthValue, + portFlowAlarmExceedThreshold Integer32, + portFlowAlarmNormalThreshold Integer32 + } + + portFlowAlarmPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number." + --端口号，端口流量告警表的索引值 + ::= { portFlowAlarmEntry 1 } + + portFlowAlarmEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The enable status of the port flow alarm" + --端口流量告警开启/关闭状态 + ::= { portFlowAlarmEntry 2 } + + portFlowAlarmExceedStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The exceed status of the port flow alarm" + --端口流量告警流量状态 + ::= { portFlowAlarmEntry 3 } + + portFlowAlarmExceedThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The exceed threshold of port flow alarm." + --端口流量过大的阈值 + ::= { portFlowAlarmEntry 4 } + + portFlowAlarmNormalThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The normal threshold of port flow alarm." + --端口流量正常的阈值 + ::= { portFlowAlarmEntry 5 } + + portFlowAlarmGlobalEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The global enable status of port flow alarm." + --全局端口流量告警开启/关闭状态 + ::= { gbnDeviceSwitchFlowAlarm 2 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchTrap - gbn device switch TRAP +-- +------------------------------------------------------------------------------ + portFlowAlarmTrap OBJECT IDENTIFIER ::= { gbnDeviceSwitchFlowAlarm 5 } + + portFlowAlarmExceedTrap NOTIFICATION-TYPE + OBJECTS { portFlowAlarmPort } + STATUS current + DESCRIPTION + "Port ingress packet rate become too big, port flow exceed alarm happen." + ::= { portFlowAlarmTrap 1 } + + portFlowAlarmNormalTrap NOTIFICATION-TYPE + OBJECTS { portFlowAlarmPort } + STATUS current + DESCRIPTION + "Port ingress packet rate become normal, port flow normal alarm happen." + --如果端口进来的报文速率恢复正常，则发出端口速率正常的trap + ::= { portFlowAlarmTrap 2 } + +-- the quene-scheduer QOS + + qosQueueSchedulerGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchQueneScheduer 1 } + + qosWrrQueue1Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 1th queue(%). for 3650, the range is 1 to 255, for 3750-24/48,the range is 1 to 15." + --队列1的权重。对于3650，范围为1到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 1 } + + qosWrrQueue2Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 2th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列2的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 2 } + + + qosWrrQueue3Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 3th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列3的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 3 } + + + qosWrrQueue4Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 4th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列4的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 4 } + + qosWrrMaxDelayValue OBJECT-TYPE + SYNTAX INTEGER (1..255) + ACCESS read-write + STATUS current + DESCRIPTION + "the maximum allowable latency for packet transmission on the priorest COS" + --队列调度时最高优先级的队列最长等待时间 + ::= { qosQueueSchedulerGroup 5 } + + qosQueueSchedulerMode OBJECT-TYPE + SYNTAX INTEGER { + strictPriority (1), + wrr(2), + sp-wrr(3) } + ACCESS read-write + STATUS current + DESCRIPTION + "queue scheduler mode: strict priority, weighted round robin, strict priority+weighted round robin" + --队列调度模式:绝对优先级、加权轮循调度 + DEFVAL { strictPriority } + ::= { qosQueueSchedulerGroup 6 } + + qosWrrQueue5Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 5th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列5的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 7 } + + qosWrrQueue6Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 6th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列6的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 8 } + + + qosWrrQueue7Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 7th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列7的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 9 } + + + qosWrrQueue8Weight OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS current + DESCRIPTION + "Weight of 8th queue(%). for 3650, the range is 0 to 255, for 3750-24/48,the range is 1 to 15." + --队列8的权重。对于3650，范围为0到255，对于3750-24/48，范围为1到15 + ::= { qosQueueSchedulerGroup 10 } + + qosLineRateTable OBJECT-TYPE + SYNTAX SEQUENCE OF QosLineRateEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of line-rate QOS entries. " + --端口限速入口表 + ::= { gbnDeviceSwitchLineRate 1 } + + qosLineRateEntry OBJECT-TYPE + SYNTAX QosLineRateEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of line-rate QOS entries. " + --端口限速入口 + INDEX { qosLineRateInterface } + ::= { qosLineRateTable 1 } + + QosLineRateEntry ::= + SEQUENCE { + qosLineRateInterface + INTEGER, + qosLineRateTargetRate + INTEGER, + qosLineRateTargetBurst + INTEGER, + qosLineRateTargetRateIngress + INTEGER, + qosLineRateRowStatus + RowStatus + } + + qosLineRateInterface OBJECT-TYPE + SYNTAX INTEGER (1..26) + ACCESS read-only + STATUS current + DESCRIPTION + "the line rate interface. " + --端口限速端口 + ::= { qosLineRateEntry 1 } + + qosLineRateTargetRate OBJECT-TYPE + SYNTAX INTEGER (64..1000000) + ACCESS read-write + STATUS current + DESCRIPTION + "The target rate(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps " + --端口限速目标速率(Kbps),必须是64Kbps的倍数 + ::= { qosLineRateEntry 2 } + + qosLineRateTargetBurst OBJECT-TYPE + SYNTAX INTEGER (64..1000000) + ACCESS read-write + STATUS current + DESCRIPTION + "The target burst(Kbps) of the line-rate QOS. Must be a multiple of 64Kbps " + --端口限速允许突发速率(Kbps),必须是64Kbps的倍数 + ::= { qosLineRateEntry 3 } + + qosLineRateTargetRateIngress OBJECT-TYPE + SYNTAX INTEGER (0..1024000) + ACCESS read-write + STATUS current + DESCRIPTION + "The ingress target rate(Kbps) of the line-rate QOS.0 means disable" + --入口端口限速目标速率(Kbps) + ::= { qosLineRateEntry 4 } + + portIsolationGroup OBJECT IDENTIFIER ::= { gbnDeviceSwitchPortIsolation 1 } + + portIsolationDownLinkPorts OBJECT-TYPE + SYNTAX PortList + ACCESS read-write + STATUS current + DESCRIPTION + "port isolation down link portlist" + -- 端口隔离的下行端口列表 -- + ::= { portIsolationGroup 1 } + + portIsolationUpLinkTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortIsolationUpLinkEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of uplink-ports of portisolation entries. conflict with portIsolationDownLinkPorts." + --基于端口的端口隔离上行口列表，不能够跟portIsolationDownLinkPorts同时使用 + ::= { portIsolationGroup 2 } + + portIsolationUpLinkEntry OBJECT-TYPE + SYNTAX PortIsolationUpLinkEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of uplink-ports of portisolation entries. " + --基于端口的端口隔离上行口列表 + INDEX { portisolationInterface } + ::= { portIsolationUpLinkTable 1 } + + PortIsolationUpLinkEntry ::= + SEQUENCE { + portisolationInterface + INTEGER, + portisolationUplinkList + PortList + } + + portisolationInterface OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS current + DESCRIPTION + "port index, start from 1. " + --端口索引 + ::= { portIsolationUpLinkEntry 1 } + + portisolationUplinkList OBJECT-TYPE + SYNTAX PortList + ACCESS read-write + STATUS current + DESCRIPTION + "portlist of uplink ports,when configured , a port can only communicate with it's uplink ports. " + --上行口列表，当配置后，端口只允许跟它的上行口通信 + ::= { portIsolationUpLinkEntry 2 } + + + stormControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF StormControlEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of storm control entries. " + --风暴控制入口表 + ::= { gbnDeviceSwitchStormControl 1 } + + stormControlEntry OBJECT-TYPE + SYNTAX StormControlEntry + ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of storm control entries. " + --风暴控制入口 + INDEX { stormControlInterface, stormControlType } + ::= { stormControlTable 1 } + + StormControlEntry ::= + SEQUENCE { + stormControlInterface + INTEGER, + stormControlType + INTEGER, + stormControlTargetRate + INTEGER, + stormControlRowStatus + RowStatus, + stormControlMode + INTEGER + } + + stormControlInterface OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS current + DESCRIPTION + "the storm control interface. " + --风暴控制端口 + ::= { stormControlEntry 1 } + + stormControlType OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS current + DESCRIPTION + "the pack flow type of the storm control. " + --风暴控制报文流类型 + ::= { stormControlEntry 2 } + + stormControlTargetRate OBJECT-TYPE + SYNTAX INTEGER (1..1000) + ACCESS read-write + STATUS current + DESCRIPTION + "the target rate of the storm control. " + --风暴控制目标速率 + ::= { stormControlEntry 3 } + + stormControlRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "row status of the storm control" + --风暴控制行状态 + ::= { stormControlEntry 4 } + + stormControlMode OBJECT-TYPE + SYNTAX INTEGER { + pps(0), + bps(1) } + ACCESS read-write + STATUS current + DESCRIPTION + "the mode of the storm control. " + ::= { stormControlEntry 5 } + + ipfragmnetnumber OBJECT-TYPE + SYNTAX INTEGER (0..800) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The ip fragment number." + ::= { gbnDeviceSwitchAntiDos 1 } + + ipTTL OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control IP with TTL=0 packet,default is not traffic to the CPU." + --控制TTL=0的报文是否送往CPU,默认情况是关闭上报CPU. + ::= { gbnDeviceSwitchAntiDos 2 } + + bandwidthcontrolTable OBJECT-TYPE + SYNTAX SEQUENCE OF BandwidthcontrolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of switch interfaces and associated properties." + ::= { gbnDeviceSwitchBandWidth 1 } + + bandwidthcontrolEntry OBJECT-TYPE + SYNTAX BandwidthcontrolEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for switch interface control and status information." + INDEX { controlPort } + ::= { bandwidthcontrolTable 1 } + + BandwidthcontrolEntry ::= SEQUENCE { + controlPort INTEGER, + portEgressBandwidthcontrol INTEGER, + portIngressBandwidthcontrol INTEGER + } + + controlPort OBJECT-TYPE + SYNTAX INTEGER (1..26) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "the index of port." + ::= { bandwidthcontrolEntry 1 } + + portEgressBandwidthcontrol OBJECT-TYPE + SYNTAX INTEGER (0..1024000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Egress Speed Value of port, bandwidth control ." + ::= { bandwidthcontrolEntry 2 } + + portIngressBandwidthcontrol OBJECT-TYPE + SYNTAX INTEGER (0..1024000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Ingress Speed Value of port, bandwidth control ." + ::= { bandwidthcontrolEntry 3 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchHigigStatistics - Higig Statistics Info +-- +------------------------------------------------------------------------------ + higigStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF HigigStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Higig Statistics Info." + ::= { gbnDeviceSwitchHigigStatistics 1 } + + higigStatisticsEntry OBJECT-TYPE + SYNTAX HigigStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for Higig Statistics information." + INDEX { unit , higig } + ::= { higigStatisticsTable 1 } + + HigigStatisticsEntry ::= SEQUENCE { + unit INTEGER, + higig INTEGER, + snEtherStatsPkts64Octets Counter64, + snEtherStatsPkts65to127Octets Counter64, + snEtherStatsPkts128to255Octets Counter64, + snEtherStatsPkts256to511Octets Counter64, + snEtherStatsPkts512to1023Octets Counter64, + snEtherStatsPkts1024to1518Octets Counter64, + sndot1dTpPortInFrames Counter64, + snifInOctets Counter64, + snifInDiscards Counter64, + snifInUcastPkts Counter64, + snifInMulticastPkts Counter64, + snifInBroadcastPkts Counter64, + snifInErrors Counter64, + snDot3StatsFCSErrors Counter64, + snDot3StatsSymbolErrors Counter64, + snDot3StatsCarrierSenseErrors Counter64, + snEtherStatsUndersizePkts Counter64, + snEtherStatsOversizePkts Counter64, + snEtherStatsFragments Counter64, + snEtherStatsJabbers Counter64, + sndot1dTpPortOutFrames Counter64, + snifOutOctets Counter64, + snifOutDiscards Counter64, + snifOutUcastPkts Counter64, + snifOutMulticastPkts Counter64, + snifOutBroadcastPkts Counter64, + snifOutErrors Counter64, + snDot3StatsDeferredTransmissions Counter64, + snEtherStatsCollisions Counter64, + snDot3StatsLateCollisions Counter64 + } + + unit OBJECT-TYPE + SYNTAX INTEGER (0..1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "unit number." + ::= { higigStatisticsEntry 1 } + + higig OBJECT-TYPE + SYNTAX INTEGER (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "higig number." + ::= { higigStatisticsEntry 2 } + + snEtherStatsPkts64Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were 64 octets in length + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 3 } + + snEtherStatsPkts65to127Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 65 and 127 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 4 } + + snEtherStatsPkts128to255Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 128 and 255 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 5 } + + snEtherStatsPkts256to511Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 256 and 511 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 6 } + + snEtherStatsPkts512to1023Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 512 and 1023 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 7 } + + snEtherStatsPkts1024to1518Octets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 1024 and 1518 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { higigStatisticsEntry 8 } + + sndot1dTpPortInFrames OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been received by + this port from its segment. Note that a frame + received on the interface corresponding to this + port is only counted by this object if and only if + it is for a protocol being processed by the local + bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { higigStatisticsEntry 9 } + + snifInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 10 } + + snifInDiscards OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of inbound packets which were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 11 } + + snifInUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 12 } + + snifInMulticastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + multicast address at this sub-layer. For a MAC layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 13 } + + snifInBroadcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 14 } + + snifInErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from + being deliverable to a higher-layer protocol. For + character-oriented or fixed-length interfaces, the + number of inbound transmission units that contained + errors preventing them from being deliverable to a + higher-layer protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 15 } + + snDot3StatsFCSErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that are an integral number of octets + in length but do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { higigStatisticsEntry 16 } + + snDot3StatsSymbolErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For an interface operating at 100 Mb/s, the + number of times there was an invalid data symbol + when a valid carrier was present. + + For an interface operating in half-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than slotTime, and + during which there was at least one occurrence + of an event that causes the PHY to indicate + 'Data reception error' or 'carrier extend error' + on the GMII. + + For an interface operating in full-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle a carrier event) for a period + of time equal to or greater than minFrameSize, + and during which there was at least one + occurrence of an event that causes the PHY to + indicate 'Data reception error' on the GMII. + + The count represented by an instance of this + object is incremented at most once per carrier + event, even if multiple symbol errors occur + during the carrier event. This count does + not increment if a collision is present. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE + "[IEEE 802.3 Std.], 30.3.2.1.5, + aSymbolErrorDuringCarrier." + ::= { higigStatisticsEntry 17 } + + snDot3StatsCarrierSenseErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that the carrier sense + condition was lost or never asserted when + attempting to transmit a frame on a particular + interface. + + The count represented by an instance of this + object is incremented at most once per + transmission attempt, even if the carrier sense + condition fluctuates during a transmission + attempt." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { higigStatisticsEntry 18 } + + snEtherStatsUndersizePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise well + formed." + ::= { higigStatisticsEntry 19 } + + snEtherStatsOversizePkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets) and were otherwise + well formed." + ::= { higigStatisticsEntry 20 } + + snEtherStatsFragments OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were less + than 64 octets in length (excluding framing bits but + including FCS octets) and had either a bad Frame + Check Sequence (FCS) with an integral number of + octets (FCS Error) or a bad FCS with a non-integral + number of octets (Alignment Error). + + Note that it is entirely normal for + etherStatsFragments to increment. This is because + it counts both runts (which are normal occurrences + due to collisions) and noise hits." + ::= { higigStatisticsEntry 21 } + + snEtherStatsJabbers OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets), and had either a bad + Frame Check Sequence (FCS) with an integral number + of octets (FCS Error) or a bad FCS with a + non-integral number of octets (Alignment Error). + + Note that this definition of jabber is different + than the definition in IEEE-802.3 section 8.2.1.5 + (10BASE5) and section 10.3.1.4 (10BASE2). These + documents define jabber as the condition where any + packet exceeds 20 ms. The allowed range to detect + jabber is between 20 ms and 150 ms." + ::= { higigStatisticsEntry 22 } + + sndot1dTpPortOutFrames OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been transmitted + by this port to its segment. Note that a frame + transmitted on the interface corresponding to this + port is only counted by this object if and only if + it is for a protocol being processed by the local + bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { higigStatisticsEntry 23 } + + snifOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 24 } + + snifOutDiscards OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of outbound packets which were chosen to + be discarded even though no errors had been detected + to prevent their being transmitted. One possible + reason for discarding such a packet could be to free + up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 25 } + + snifOutUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were not + addressed to a multicast or broadcast address at this + sub-layer, including those that were discarded or not + sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 26 } + + snifOutMulticastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a multicast address at this sub-layer, + including those that were discarded or not sent. For + a MAC layer protocol, this includes both Group and + Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 27 } + + snifOutBroadcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 28 } + + snifOutErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For packet-oriented interfaces, the number of + outbound packets that could not be transmitted because + of errors. For character-oriented or fixed-length + interfaces, the number of outbound transmission units + that could not be transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { higigStatisticsEntry 29 } + + snDot3StatsDeferredTransmissions OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which the first + transmission attempt on a particular interface + is delayed because the medium is busy. + + The count represented by an instance of this + object does not include frames involved in + collisions." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { higigStatisticsEntry 30 } + + snEtherStatsCollisions OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the total number of collisions + on this Ethernet segment. + + The value returned will depend on the location of + the RMON probe. Section 8.2.1.3 (10BASE-5) and + section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 + states that a station must detect a collision, in + the receive mode, if three or more stations are + transmitting simultaneously. A repeater port must + detect a collision when two or more stations are + transmitting simultaneously. Thus a probe placed on + a repeater port could record more collisions than a + probe connected to a station on the same segment + would. + + Probe location plays a much smaller role when + considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE + standard 802.3 defines a collision as the + simultaneous presence of signals on the DO and RD + circuits (transmitting and receiving at the same + time). A 10BASE-T station can only detect + collisions when it is transmitting. Thus probes + placed on a station and a repeater, should report + the same number of collisions. + + Note also that an RMON probe inside a repeater + should ideally report collisions between the + repeater and one or more other hosts (transmit + collisions as defined by IEEE 802.3k) plus receiver + collisions observed on any coax segments to which + the repeater is connected." + ::= { higigStatisticsEntry 31 } + + snDot3StatsLateCollisions OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that a collision is + detected on a particular interface later than + 512 bit-times into the transmission of a + packet. + + Five hundred and twelve bit-times corresponds + to 51.2 microseconds on a 10 Mbit/s system. A + (late) collision included in a count + represented by an instance of this object is + also considered as a (generic) collision for + purposes of other collision-related + statistics." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { higigStatisticsEntry 32 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchChannelStats - Channel group Sttatistics Info +-- +------------------------------------------------------------------------------ + channelStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF ChannelStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Channel group Statistics Info(32)." + ::= { gbnDeviceSwitchChannelStats 1 } + +-- The channelStatsEntry + channelStatsEntry OBJECT-TYPE + SYNTAX ChannelStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for Channel Statistics information(32)." + INDEX { channelGroupIndex } + ::= { channelStatsTable 1 } + + ChannelStatsEntry ::= SEQUENCE { + channelGroupIndex INTEGER, + channelInOctetRate Counter32, + channelInFrameRate Counter32, + channelOutOctetRate Counter32, + channelOutFrameRate Counter32, + channelPkts64Octets Counter32, + channelPkts65to127Octets Counter32, + channelPkts128to255Octets Counter32, + channelPkts256to511Octets Counter32, + channelPkts512to1023Octets Counter32, + channelPkts1024to1518Octets Counter32, + channelInFrames Counter32, + channelInOctets Counter32, + channelInDiscards Counter32, + channelInUcastPkts Counter32, + channelInMulticastPkts Counter32, + channelInBroadcastPkts Counter32, + channelInErrors Counter32, + channelFCSErrors Counter32, + channelSymbolErrors Counter32, + channelCarrierSenseErrors Counter32, + channelUndersizePkts Counter32, + channelOversizePkts Counter32, + channelFragments Counter32, + channelJabbers Counter32, + channelOutFrames Counter32, + channelOutOctets Counter32, + channelOutDiscards Counter32, + channelOutUcastPkts Counter32, + channelOutMulticastPkts Counter32, + channelOutBroadcastPkts Counter32, + channelOutErrors Counter32, + channelDeferredTransmissions Counter32, + channelCollisions Counter32, + channelLateCollisions Counter32 + } + + channelGroupIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The configed channel-group index list." + --已配置的汇聚组索引列表 + ::= { channelStatsEntry 1 } + + channelInOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress octet rate of this channel-group." + --该汇聚组接收报文字节的速率 + ::= { channelStatsEntry 2 } + + channelInFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress packet rate of this channel-group." + --该汇聚组接收报文的速率 + ::= { channelStatsEntry 3 } + + channelOutOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress octet rate of this channel-group." + --该汇聚组发送报文字节的速率 + ::= { channelStatsEntry 4 } + + channelOutFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress packet rate of this channel-group." + --该汇聚组发送报文的速率 + ::= { channelStatsEntry 5 } + + channelPkts64Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were 64 octets in length + (excluding framing bits but including FCS octets) + in this channel-group." + ::= { channelStatsEntry 6 } + + channelPkts65to127Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 65 and 127 octets in length inclusive + (excluding framing bits but including FCS octets) + in this channel-group." + ::= { channelStatsEntry 7 } + + channelPkts128to255Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 128 and 255 octets in length inclusive + (excluding framing bits but including FCS octets). + in this channel-group." + ::= { channelStatsEntry 8 } + + channelPkts256to511Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 256 and 511 octets in length inclusive + (excluding framing bits but including FCS octets) + in this channel-group." + ::= { channelStatsEntry 9 } + + channelPkts512to1023Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 512 and 1023 octets in length inclusive + (excluding framing bits but including FCS octets) + in this channel-group." + ::= { channelStatsEntry 10 } + + channelPkts1024to1518Octets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 1024 and 1518 octets in length inclusive + (excluding framing bits but including FCS octets) + in this channel-group." + ::= { channelStatsEntry 11 } + + channelInFrames OBJECT-TYPE + SYNTAX Counter32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been received by + this channel-group from its segment. Note that a frame + received on the interface corresponding to this + channel-group is only counted by this object if and + only if it is for a protocol being processed by the + local bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { channelStatsEntry 12 } + + channelInOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received on the channel-group, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 13 } + + channelInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of inbound packets which were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 14 } + + channelInUcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 15 } + + channelInMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + multicast address at this sub-layer. For a MAC layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 16 } + + channelInBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 17 } + + channelInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from + being deliverable to a higher-layer protocol. For + character-oriented or fixed-length interfaces, the + number of inbound transmission units that contained + errors preventing them from being deliverable to a + higher-layer protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 18 } + + channelFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames received on a particular + interface that are an integral number of octets + in length but do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions obtain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { channelStatsEntry 19 } + + channelSymbolErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For an interface operating at 100 Mb/s, the + number of times there was an invalid data symbol + when a valid carrier was present. + + For an interface operating in half-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than slotTime, and + during which there was at least one occurrence + of an event that causes the PHY to indicate + 'Data reception error' or 'carrier extend error' + on the GMII. + + For an interface operating in full-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle a carrier event) for a period + of time equal to or greater than minFrameSize, + and during which there was at least one + occurrence of an event that causes the PHY to + indicate 'Data reception error' on the GMII. + + The count represented by an instance of this + object is incremented at most once per carrier + event, even if multiple symbol errors occur + during the carrier event. This count does + not increment if a collision is present. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE + "[IEEE 802.3 Std.], 30.3.2.1.5, + aSymbolErrorDuringCarrier." + ::= { channelStatsEntry 20 } + + channelCarrierSenseErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that the carrier sense + condition was lost or never asserted when + attempting to transmit a frame on a particular + interface. + + The count represented by an instance of this + object is incremented at most once per + transmission attempt, even if the carrier sense + condition fluctuates during a transmission + attempt." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { channelStatsEntry 21 } + + channelUndersizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise well + formed." + ::= { channelStatsEntry 22 } + + channelOversizePkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets) and were otherwise + well formed." + ::= { channelStatsEntry 23 } + + channelFragments OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were less + than 64 octets in length (excluding framing bits but + including FCS octets) and had either a bad Frame + Check Sequence (FCS) with an integral number of + octets (FCS Error) or a bad FCS with a non-integral + number of octets (Alignment Error). + + Note that it is entirely normal for + etherStatsFragments to increment. This is because + it counts both runts (which are normal occurrences + due to collisions) and noise hits." + ::= { channelStatsEntry 24 } + + channelJabbers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets), and had either a bad + Frame Check Sequence (FCS) with an integral number + of octets (FCS Error) or a bad FCS with a + non-integral number of octets (Alignment Error). + + Note that this definition of jabber is different + than the definition in IEEE-802.3 section 8.2.1.5 + (10BASE5) and section 10.3.1.4 (10BASE2). These + documents define jabber as the condition where any + packet exceeds 20 ms. The allowed range to detect + jabber is between 20 ms and 150 ms." + ::= { channelStatsEntry 25 } + + channelOutFrames OBJECT-TYPE + SYNTAX Counter32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been transmitted + by this channel-group to its segment. Note that a + frame transmitted on the interface corresponding + to this port is only counted by this object if and + only if it is for a protocol being processed by the + local bridging function, including bridge management + frames." + REFERENCE + "IEEE 802.1D-1990: Section 6.6.1.1.3" + ::= { channelStatsEntry 26 } + + channelOutOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted out of the + channel-group, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 27 } + + channelOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of outbound packets which were chosen to + be discarded even though no errors had been detected + to prevent their being transmitted. One possible + reason for discarding such a packet could be to free + up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 28 } + + channelOutUcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were not + addressed to a multicast or broadcast address at this + sub-layer, including those that were discarded or not + sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 29 } + + channelOutMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a multicast address at this sub-layer, + including those that were discarded or not sent. For + a MAC layer protocol, this includes both Group and + Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 30 } + + channelOutBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 31 } + + channelOutErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For packet-oriented interfaces, the number of + outbound packets that could not be transmitted because + of errors. For character-oriented or fixed-length + interfaces, the number of outbound transmission units + that could not be transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsEntry 32 } + + channelDeferredTransmissions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A count of frames for which the first + transmission attempt on a particular interface + is delayed because the medium is busy. + + The count represented by an instance of this + object does not include frames involved in + collisions." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { channelStatsEntry 33 } + + channelCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the total number of collisions + on this Ethernet segment. + + The value returned will depend on the location of + the RMON probe. Section 8.2.1.3 (10BASE-5) and + section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 + states that a station must detect a collision, in + the receive mode, if three or more stations are + transmitting simultaneously. A repeater port must + detect a collision when two or more stations are + transmitting simultaneously. Thus a probe placed on + a repeater port could record more collisions than a + probe connected to a station on the same segment + would. + + Probe location plays a much smaller role when + considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE + standard 802.3 defines a collision as the + simultaneous presence of signals on the DO and RD + circuits (transmitting and receiving at the same + time). A 10BASE-T station can only detect + collisions when it is transmitting. Thus probes + placed on a station and a repeater, should report + the same number of collisions. + + Note also that an RMON probe inside a repeater + should ideally report collisions between the + repeater and one or more other hosts (transmit + collisions as defined by IEEE 802.3k) plus receiver + collisions observed on any coax segments to which + the repeater is connected." + ::= { channelStatsEntry 34 } + + channelLateCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that a collision is + detected on a particular interface later than + 512 bit-times into the transmission of a + packet. + + Five hundred and twelve bit-times corresponds + to 51.2 microseconds on a 10 Mbit/s system. A + (late) collision included in a count + represented by an instance of this object is + also considered as a (generic) collision for + purposes of other collision-related + statistics." + REFERENCE + "IEEE 802.3 Layer Management" + ::= { channelStatsEntry 35 } + +-- The channelStatsXEntry + channelStatsXTable OBJECT-TYPE + SYNTAX SEQUENCE OF ChannelStatsXEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Channel group Statistics Info(64)." + ::= { gbnDeviceSwitchChannelStats 2 } + + channelStatsXEntry OBJECT-TYPE + SYNTAX ChannelStatsXEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for Channel Statistics information(64)." + AUGMENTS { channelStatsEntry } + ::= { channelStatsXTable 1 } + + ChannelStatsXEntry ::= SEQUENCE { + channelHCInFrames Counter64, + channelHCInOctets Counter64, + channelHCInUcastPkts Counter64, + channelHCInMulticastPkts Counter64, + channelHCInBroadcastPkts Counter64, + channelHCInDiscards Counter64, + channelHCOutFrames Counter64, + channelHCOutOctets Counter64, + channelHCOutUcastPkts Counter64, + channelHCOutMulticastPkts Counter64, + channelHCOutBroadcastPkts Counter64 + } + + channelHCInFrames OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames that have been received by + this channel-group from its segment. Note that a + frame received on the interface corresponding to + this channel-group is only counted by this object + if and only if it is for a protocol being processed + by the local bridging function, including bridge + management frames. + + This object is a 64-bit version of channelInFrames." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { channelStatsXEntry 1 } + + channelHCInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received on the channel-group, + including framing characters. This object is a 64-bit + version of channelInOctets. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 2 } + + channelHCInUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were not addressed to a + multicast or broadcast address at this sub-layer. + This object is a 64-bit version of channelInUcastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 3 } + + channelHCInMulticastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + multicast address at this sub-layer. For a MAC layer + protocol, this includes both Group and Functional + addresses. This object is a 64-bit version of + channelInMulticastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 4 } + + channelHCInBroadcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, delivered by this sub-layer to + a higher (sub-)layer, which were addressed to a + broadcast address at this sub-layer. This object is a + 64-bit version of channelInBroadcastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 5 } + + channelHCInDiscards OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of valid frames that have been received by this + channel-group from its segment which were discarded (i.e., + filtered) by the Forwarding Process." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { channelStatsXEntry 6 } + + channelHCOutFrames OBJECT-TYPE + SYNTAX Counter64 + ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames that have been transmitted + by this channel-group to its segment. Note that a + frame transmitted on the interface corresponding + to this channel-group is only counted by this + object if and only if it is for a protocol being + processed by the local bridging function, including + bridge management frames. + + This object is a 64-bit version of channelOutFrames." + REFERENCE + "ISO/IEC 15802-3 Section 14.6.1.1.3" + ::= { channelStatsXEntry 7 } + + channelHCOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted out of the + channel-group, including framing characters. This + object is a 64-bit version of channelOutOctets. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 8 } + + channelHCOutUcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were not + addressed to a multicast or broadcast address at this + sub-layer, including those that were discarded or not + sent. This object is a 64-bit version of channelOutUcastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 9 } + + channelHCOutMulticastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a multicast address at this sub-layer, + including those that were discarded or not sent. For + a MAC layer protocol, this includes both Group and + Functional addresses. This object is a 64-bit version + of channelOutMulticastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 10 } + + channelHCOutBroadcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted, and which were + addressed to a broadcast address at this sub-layer, + including those that were discarded or not sent. This + object is a 64-bit version of channelOutBroadcastPkts. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + ifCounterDiscontinuityTime." + ::= { channelStatsXEntry 11 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchRemoteMirror - Mirror Group +-- +------------------------------------------------------------------------------ + remoteMirrorVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF RemoteMirrorVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of switch interfaces and associated properties." + ::= { gbnDeviceSwitchRmoteMirror 1 } + + remoteMirrorVlanEntry OBJECT-TYPE + SYNTAX RemoteMirrorVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for switch interface control and status information." + INDEX { remoteMirrorVlanIndex } + ::= { remoteMirrorVlanTable 1 } + + RemoteMirrorVlanEntry ::= SEQUENCE { + remoteMirrorVlanIndex INTEGER, + remoteMirrorVlanEnable TruthValue + + } + + remoteMirrorVlanIndex OBJECT-TYPE + SYNTAX INTEGER (2..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "the index of remote mirror vlan." + ::= { remoteMirrorVlanEntry 1 } + + remoteMirrorVlanEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "1:enable. 2 disable" + ::= { remoteMirrorVlanEntry 2 } + + remoteMirrorRspanVlanSet OBJECT-TYPE + SYNTAX INTEGER (0..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "set rspan vlan on src-switch, + 0:means no rspan vlan;don't set vlan 1 to be rspan vlan" + ::= { gbnDeviceSwitchRmoteMirror 2 } + + remoteMirrorEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enable remote mirror on src-switch" + ::= { gbnDeviceSwitchRmoteMirror 3 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchPortSFPInfo - Port SFP Information +-- +------------------------------------------------------------------------------ + portSFPInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortSFPInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of switch interfaces and associated properties." + ::= { gbnDeviceSwitchPortSFPInfo 1 } + + portSFPInfoEntry OBJECT-TYPE + SYNTAX PortSFPInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for switch interface control and status information." + INDEX { portSFPNumber } + ::= { portSFPInfoTable 1 } + + PortSFPInfoEntry ::= SEQUENCE { + portSFPNumber INTEGER, + transceiverType INTEGER, + compliance DisplayString, + connectorType INTEGER, + waveLength INTEGER, + transferDistance INTEGER, + digitalDiagnosticMonitor INTEGER, + vendorName DisplayString, + manuSerialNumber DisplayString, + manufacturingDate DisplayString, + temperature INTEGER, + voltage DisplayString, + biasCurrent DisplayString, + biasHighThreshold DisplayString, + biasLowThreshold DisplayString, + rxPower DisplayString, + rxPowerHighThreshold DisplayString, + rxPowerLowThreshold DisplayString, + txPower DisplayString, + txPowerHighThreshold DisplayString, + txPowerLowThreshold DisplayString + } + + portSFPNumber OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of port." + ::= { portSFPInfoEntry 1 } + + transceiverType OBJECT-TYPE + SYNTAX INTEGER { + SFPNotExist(0), + GBIC(1), + SFF(2), + SFP(3), + XBI(4), + Xenpak(5), + XFP(6), + XFF(7), + XFP-E(8), + XPak(9), + X2(10), + DWDM-SFP(11), + QSFP(12), + Unknown(99) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transceiver type" + ::= { portSFPInfoEntry 2 } + + compliance OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Compliance type" + ::= { portSFPInfoEntry 3 } + + connectorType OBJECT-TYPE + SYNTAX INTEGER { + SFPNotExist(0), + SC(1), + FibreChannelStyle1CopperConnector(2), + FibreChannelStyle2CopperConnector(3), + BNCTNC(4), + FibreChannelCoaxialHeaders(5), + FiberJack(6), + LC(7), + MT-RJ(8), + MU(9), + SG(10), + OpticalPigtail(11), + MPOParallelOptic(12), + HSSDCII(32), + CopperPigtail(33), + RJ45(34), + Electrical-Mode(35), + Unknown(99) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Connector type" + ::= { portSFPInfoEntry 4 } + + waveLength OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Wave length." + ::= { portSFPInfoEntry 5 } + + transferDistance OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transfer distance." + ::= { portSFPInfoEntry 6 } + + digitalDiagnosticMonitor OBJECT-TYPE + SYNTAX INTEGER { + SFPNotExist(0), + NotSupported(1), + Supported(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Digital Diagnostic Monitor." + ::= { portSFPInfoEntry 7 } + + vendorName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vendor Name." + ::= { portSFPInfoEntry 8 } + + manuSerialNumber OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Manufacture Serial Number." + ::= { portSFPInfoEntry 9 } + + manufacturingDate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Manufacturing Date." + ::= { portSFPInfoEntry 10 } + + temperature OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature of sfp." + ::= { portSFPInfoEntry 11 } + + voltage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Voltage of sfp." + ::= { portSFPInfoEntry 12 } + + biasCurrent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "bias Current." + ::= { portSFPInfoEntry 13 } + + biasHighThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "bias Current High Threshold." + ::= { portSFPInfoEntry 14 } + + biasLowThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "bias Current Low Threshold." + ::= { portSFPInfoEntry 15 } + + rxPower OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RX Power." + ::= { portSFPInfoEntry 16 } + + rxPowerHighThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RX Power High Threshold." + ::= { portSFPInfoEntry 17 } + + rxPowerLowThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RX Power Low Threshold." + ::= { portSFPInfoEntry 18 } + + txPower OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TX Power." + ::= { portSFPInfoEntry 19 } + + txPowerHighThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TX Power High Threshold." + ::= { portSFPInfoEntry 20 } + + txPowerLowThreshold OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TX Power Low Threshold." + ::= { portSFPInfoEntry 21 } + +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchPortAvgRate - Port Average Rate Statistics Info +-- +------------------------------------------------------------------------------ + portRateStatisticsInterval OBJECT-TYPE + SYNTAX Integer32 (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "port average rate statistics time interval, unit is minute, default is 5 minutes." + ::= { gbnDeviceSwitchPortAvgRate 1 } + + portAvgRateTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortAvgRateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of port average rate statistics info(32)." + ::= { gbnDeviceSwitchPortAvgRate 2 } + + portAvgRateEntry OBJECT-TYPE + SYNTAX PortAvgRateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for port average rate statistics information(32)." + INDEX { portIndex } + ::= { portAvgRateTable 1 } + + PortAvgRateEntry ::= SEQUENCE { + portIndex INTEGER, + portInOctetRate Counter32, + portInFrameRate Counter32, + portOutOctetRate Counter32, + portOutFrameRate Counter32 + } + + portIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port index list." + ::= { portAvgRateEntry 1 } + + portInOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress octet rate of this port." + ::= { portAvgRateEntry 2 } + + portInFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress packet rate of this port." + ::= { portAvgRateEntry 3 } + + portOutOctetRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress octet rate of this port." + ::= { portAvgRateEntry 4 } + + portOutFrameRate OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress packet rate of this port." + ::= { portAvgRateEntry 5 } +------------------------------------------------------------------------------ +-- +-- gbnDeviceSwitchPortbandwidthUtilization - Port Average bandwidth utilization Info +-- +------------------------------------------------------------------------------ + portBandwidthUtilizationEnable OBJECT-TYPE + SYNTAX TruthValue + { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port bandwidth switch." + ::= { gbnDeviceSwitchPortbandwidthUtilization 1 } + + portBandwidthUtilizationTable OBJECT-TYPE + SYNTAX SEQUENCE OF PortBandwidthUtilizationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of port bandwidth utilization info(32)." + ::= { gbnDeviceSwitchPortbandwidthUtilization 2 } + + portBandwidthUtilizationEntry OBJECT-TYPE + SYNTAX PortBandwidthUtilizationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table entry for port bandwidth utilization information(32)." + INDEX { portBandIndex } + ::= { portBandwidthUtilizationTable 2 } + + PortBandwidthUtilizationEntry ::= SEQUENCE { + portBandIndex INTEGER, + portInBandwidthUtilization Counter32, + portOutBandwidthUtilization Counter32 + } + + portBandIndex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port index list." + ::= { portBandwidthUtilizationEntry 1 } + + portInBandwidthUtilization OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ingress bandwidth utilization of this port." + ::= { portBandwidthUtilizationEntry 2 } + + portOutBandwidthUtilization OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The egress bandwidth utilization of this port." + ::= { portBandwidthUtilizationEntry 3 } +-- +-- END of gbnDeviceSwitch-MIB +-- + +END -- cgit v1.2.3