From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/huawei/HUAWEI-DC-TRAP-MIB | 1035 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1035 insertions(+) create mode 100644 MIBS/huawei/HUAWEI-DC-TRAP-MIB (limited to 'MIBS/huawei/HUAWEI-DC-TRAP-MIB') diff --git a/MIBS/huawei/HUAWEI-DC-TRAP-MIB b/MIBS/huawei/HUAWEI-DC-TRAP-MIB new file mode 100644 index 0000000..c574e6d --- /dev/null +++ b/MIBS/huawei/HUAWEI-DC-TRAP-MIB @@ -0,0 +1,1035 @@ +-- ================================================================= +-- Copyright (C) 2004 by HUAWEI TECHNOLOGIES. All rights reserved +-- +-- Description: The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS +-- +-- Reference: +-- Version: V1.0 +-- History: +-- +-- ================================================================= + + HUAWEI-DC-TRAP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + entPhysicalName + FROM ENTITY-MIB + hwDatacomm + FROM HUAWEI-MIB + ifIndex, ifDescr + FROM RFC1213-MIB + DisplayString + FROM SNMPv2-TC + OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP + FROM SNMPv2-CONF + OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE + FROM SNMPv2-SMI; + + + hwDCTrapMIB MODULE-IDENTITY + LAST-UPDATED "200604240000Z" -- April 24, 2006 at 00:00 GMT + ORGANIZATION + "Huawei Technologies co.,Ltd." + CONTACT-INFO + " R&D BeiJing, Huawei Technologies co.,Ltd. + Huawei Bld.,NO.3 Xinxi Rd., + Shang-Di Information Industry Base, + Hai-Dian District Beijing P.R. China + Zip:100085 + Http://www.huawei.com + E-mail:support@huawei.com " + DESCRIPTION + " + The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS. + " + ::= { hwDatacomm 37 } + + + + + + hwDCTrapControl OBJECT IDENTIFIER ::= { hwDCTrapMIB 1 } + + hwDCCtrlTrap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A string serving as a bit map for the trap + events defined by the hwDatacomm traps. This + object is used to enable and disable specific + hwDatacomm traps where a 1 in the bit field + represents enabled. The right-most bit (least + significant) represents trap 0." + ::= { hwDCTrapControl 1 } + + hwTunnelGroupID OBJECT-TYPE + SYNTAX INTEGER (0..2047) + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "Tunnel id" + ::= { hwDCTrapControl 2 } + + hwDCTrapReason OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + " For the BTB system to report Trap Reason." + ::= { hwDCTrapControl 3 } + + hwDCTraps OBJECT IDENTIFIER ::= { hwDCTrapMIB 2 } + +-- Traps + hwMPUSynClkFaulty NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "MPU sync clock signal faulty!" + ::= { hwDCTraps 1 } + + hwMPUSynClkFaultyResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "MPU sync clock signal faulty resume!" + ::= { hwDCTraps 2 } + + hwSlaveMPUNoResp NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Slave MPU has no response!" + ::= { hwDCTraps 3 } + + hwSlaveMPUNoRespResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Slave MPU has no response resume!" + ::= { hwDCTraps 4 } + + hwBrdChannelFaulty NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board channel faulty!" + ::= { hwDCTraps 5 } + + hwBrdChannelFaultyResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board channel faulty resume!" + ::= { hwDCTraps 6 } + + hwBrdNofullin NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board not full in!" + ::= { hwDCTraps 7 } + + hwBrdNofullinResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board not full in resume!" + ::= { hwDCTraps 8 } + + hwBrdTypeNoMatchReset NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board is reset because of the chip type is not matching!" + ::= { hwDCTraps 9 } + + hwBrdAutoSwtFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board automatically switch syn-clock but it locked failed!" + ::= { hwDCTraps 10 } + + hwBrdAutoSwt NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board automatically switch syn-clock!" + ::= { hwDCTraps 11 } + + hwBrdClkLockERR NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board fabric clock is unlocked!" + ::= { hwDCTraps 12 } + + hwBrdClkLockERRResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board fabric clock unlock to current clock resume!" + ::= { hwDCTraps 13 } + + hwBrdRemoved NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board pulled out!" + ::= { hwDCTraps 14 } + + hwBrdInserted NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board plugged in!" + ::= { hwDCTraps 15 } + + hwBrdUp NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board register!" + ::= { hwDCTraps 16 } + + hwClkSrcMiss NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK source Loss Of Signal!" + ::= { hwDCTraps 17 } + + hwClkAllSrcLost NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK all source lost!" + ::= { hwDCTraps 18 } + + hwClkAllSrcLostResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK all source lost resume!" + ::= { hwDCTraps 19 } + + hwClkFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK hardware failed!" + ::= { hwDCTraps 20 } + + hwClkFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK hardware failed resume!" + ::= { hwDCTraps 21 } + + hwClkNoHeartbeat NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK No Heartbeat!" + ::= { hwDCTraps 22 } + + hwClkNoHeartbeatResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "CLK No Heartbeat resume!" + ::= { hwDCTraps 23 } + + hwLPULostSynAlarm NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LPU SERDES interface is lost synchronization!" + ::= { hwDCTraps 24 } + + hwLPUOpenChannelError NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LPU SERDES interface open error!" + ::= { hwDCTraps 25 } + + hwLPUSlfTstErr NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LPU self test error!" + ::= { hwDCTraps 26 } + + hwLPU3ClkSwitch NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LPU 3 class clock is switch!" + ::= { hwDCTraps 27 } + + hwSFULostHrtReset NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "SFU is reset because of heart beat loss!" + ::= { hwDCTraps 28 } + + hwSFULinkLostReset NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "SFU is reset because of SERDES interface input channel link lost numbers over threshold!" + ::= { hwDCTraps 29 } + + hwSFUChannelLinkLost NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "SFU check SERDES interface input channel link lost!" + ::= { hwDCTraps 30 } + + hwSFUInChannelOpenFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "SFU SERDES interface input channel is opened failed!" + ::= { hwDCTraps 31 } + + hwVoltSensorFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage monitor failure!" + ::= { hwDCTraps 32 } + + hwVoltSensorFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage monitor failure resume!" + ::= { hwDCTraps 33 } + + hwVoltBtmC NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage below fatal threshold!" + ::= { hwDCTraps 34 } + + hwVoltBtmCResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage below fatal threshold resume!" + ::= { hwDCTraps 35 } + + hwVoltSprC NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage over fatal threshold!" + ::= { hwDCTraps 36 } + + hwVoltSprCResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage over fatal threshold resume!" + ::= { hwDCTraps 37 } + + hwVoltBtmM NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage below major threshold!" + ::= { hwDCTraps 38 } + + hwVoltBtmMResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage below major threshold resume!" + ::= { hwDCTraps 39 } + + hwVoltSprM NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage over major threshold!" + ::= { hwDCTraps 40 } + + hwVoltSprMResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board voltage over major threshold resume!" + ::= { hwDCTraps 41 } + + hwTempSensorFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temprature monitor failure!" + ::= { hwDCTraps 42 } + + hwTempSensorFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature monitor failure resume!" + ::= { hwDCTraps 43 } + + hwTempMnr NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over minor threshold!" + ::= { hwDCTraps 44 } + + hwTempMnrResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over minor threshold resume!" + ::= { hwDCTraps 45 } + + hwTempMjr NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over major threshold!" + ::= { hwDCTraps 46 } + + hwTempMjrResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over major threshold resume!" + ::= { hwDCTraps 47 } + + hwTempCtl NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over fatal threshold!" + ::= { hwDCTraps 48 } + + hwTempCtlResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temperature over fatal threshold resume!" + ::= { hwDCTraps 49 } + + hwFanHFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan hardware failure!" + ::= { hwDCTraps 50 } + + hwFanFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan failure!" + ::= { hwDCTraps 51 } + + hwFanFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan failure resume!" + ::= { hwDCTraps 52 } + + hwFanAbsent NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan absent!" + ::= { hwDCTraps 53 } + + hwFanAbsentResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan absent resume!" + ::= { hwDCTraps 54 } + + hwFanCabUN NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan cable unplugged!" + ::= { hwDCTraps 55 } + + hwFanCabUNResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Fan cable unplugged resume!" + ::= { hwDCTraps 56 } + + hwPwrFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power failure!" + ::= { hwDCTraps 57 } + + hwPwrFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power failure resume!" + ::= { hwDCTraps 58 } + + hwPwrAbsent NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power absent!" + ::= { hwDCTraps 59 } + + hwPwrAbsentResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power absent resume!" + ::= { hwDCTraps 60 } + + hwPwrCabUN NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power monitor cable unplugged!" + ::= { hwDCTraps 61 } + + hwPwrCabUNResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Power monitor cable unplugged resume!" + ::= { hwDCTraps 62 } + + hwLCDHFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD hardware failure!" + ::= { hwDCTraps 63 } + + hwLCDFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD failure!" + ::= { hwDCTraps 64 } + + hwLCDAbsent NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD absent!" + ::= { hwDCTraps 65 } + + hwLCDAbsentResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD absent resume!" + ::= { hwDCTraps 66 } + + hwLCDCabUN NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD cable unplugged!" + ::= { hwDCTraps 67 } + + hwLCDCabUNResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "LCD cable unplugged resume!" + ::= { hwDCTraps 68 } + + hwROMFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "EEPROM failure!" + ::= { hwDCTraps 69 } + + hwMonitorBUSFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "MonitorBUS failure!" + ::= { hwDCTraps 70 } + + hwMonitorBUSFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "MonitorBUS failure resume!" + ::= { hwDCTraps 71 } + + hwBoardOfflineChange NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board power status change!" + ::= { hwDCTraps 72 } + + hwWriteFlashError NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "write flash error!" + ::= { hwDCTraps 100 } + + hwBoardReset NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "board reset!" + ::= { hwDCTraps 101 } + + hwBoardResetSuccess NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "board reset success!" + ::= { hwDCTraps 102 } + + hwSlaveMPUReset NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "slave MPU reset !" + ::= { hwDCTraps 103 } + + hwMasterSlaveSwap NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "master slave swap!" + ::= { hwDCTraps 104 } + + hwRTCFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "RTC failure!" + ::= { hwDCTraps 105 } + + hwExchangeChipFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "5695 exchange chip fail!" + ::= { hwDCTraps 106 } + + hwTempResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board temprature over threshold resume!" + ::= { hwDCTraps 107 } + + hwOpticalModuleInsert NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "optical module plug in !" + ::= { hwDCTraps 108 } + + hwOpticalModuleRemove NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "optical module plug out !" + ::= { hwDCTraps 109 } + + hwFPGAAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "FPGA abnormal !" + ::= { hwDCTraps 110 } + + hwMinMTunnelDownAlarm NOTIFICATION-TYPE + OBJECTS { hwTunnelGroupID } + STATUS current + DESCRIPTION + " + For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package + can't arrive to the other side of mac in mac tunnel, the status of tunnel will be down + 1 Notice/Trap name: Tunnel down + 2 Notice/Trap generation cause: when All mac tunnel have been down in the mac tunnel group + 3 Repair suggestions: + make one of the mac tunnel up in the mac tunnel group + " + ::= { hwDCTraps 111 } + + hwMinMTunnelUpAlarm NOTIFICATION-TYPE + OBJECTS { hwTunnelGroupID } + STATUS current + DESCRIPTION + " + For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac + in mac tunnel, the status of tunnel will be up + 1 Notice/Trap name: Tunnel up + 2 Notice/Trap generation cause: one of the tunnel is up in the mac tunnel group + 3 Repair suggestion: + " + ::= { hwDCTraps 112 } + + hwInterfacePhysicalDown NOTIFICATION-TYPE + OBJECTS { ifIndex, ifDescr } + STATUS current + DESCRIPTION + "This trap is to indicate port link down on physical layer." + ::= { hwDCTraps 113 } + + hwInterfacePhysicalUp NOTIFICATION-TYPE + OBJECTS { ifIndex, ifDescr } + STATUS current + DESCRIPTION + "This trap is to indicate port link up on physical layer." + ::= { hwDCTraps 114 } + + hwBTBStartupFileNameDifferent NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "In the BTB system ,the start-up file name of master and slave chassis is different . + Used for BTB or its extend system." + ::= { hwDCTraps 119 } + + hwBTBChassisRunningModeConflict NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The Master and Slave chassises running modes conflict.Used for BTB or its extend system." + ::= { hwDCTraps 120 } + + hwBTBCtrlChannelFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The FE control channel failture, as physical link from up to down or channel blocked. + Used for BTB or its extend system." + ::= { hwDCTraps 121 } + + hwBTBCtrlChannelFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The FE control channel failture resume.Used for BTB or its extend system." + ::= { hwDCTraps 122 } + + hwBTBDataChannelFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The data channel failture, all optical links down between chassises.Used for BTB or its extend system." + ::= { hwDCTraps 123 } + + hwBTBDataChannelFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The data channel failture resume.Used for BTB or its extend system." + ::= { hwDCTraps 124 } + + hwBTBClkChannelFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The clock channel failture, clock link down between chassises.Used for BTB or its extend system." + ::= { hwDCTraps 125 } + + hwBTBClkChannelFailResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The clock Channel failture resume.Used for BTB or its extend system." + ::= { hwDCTraps 126 } + + hwBTBSFUOpticInterfaceError NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The optical fiber connection error, the connection of SFU fiber between chassises is not correct. + Used for BTB or its extend system." + ::= { hwDCTraps 127 } + + hwBTBSFUOpticInterfaceErrorResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The optical fiber connection error resume.Used for BTB or its extend system." + ::= { hwDCTraps 128 } + + hwBTBVSRInterfaceInvalid NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The SFU VSR(very short reach) interface invalid.Used for BTB or its extend system." + ::= { hwDCTraps 129 } + + hwBTBVSRInterfaceInvalidResume NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system." + ::= { hwDCTraps 130 } + + hwBTBSlaveChassisNoHeart NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The slave chassis no heart.Used for BTB or its extend system." + ::= { hwDCTraps 131 } + + hwBTBNoSlaveChassis NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "No slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system." + ::= { hwDCTraps 132 } + + hwBTBSlaveChassisRegisted NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The slave chassis registe successful.Used for BTB or its extend system." + ::= { hwDCTraps 133 } + + hwBTBSlaveChassisRegisteFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The slave chassis registe failed.Used for BTB or its extend system." + ::= { hwDCTraps 134 } + + hwBTBChassisTypeConflict NOTIFICATION-TYPE + OBJECTS { entPhysicalName, hwDCTrapReason } + STATUS current + DESCRIPTION + "The chassis information conflict in the PAF and Nvram.Used for BTB or its extend system." + ::= { hwDCTraps 135 } + + hwSuperChangeSuccesful NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "Super change successful." + ::= { hwDCTraps 136 } + + hwSuperChangeFailure NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "Super change Failure." + ::= { hwDCTraps 137 } + + hwOpticaPowerAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Optical Transceiver power abnormal." + ::= { hwDCTraps 138 } + + hwEpldAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Epld logic abnormal." + ::= { hwDCTraps 139 } + + hwPhyChipAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "PHY chip is abnormal." + ::= { hwDCTraps 140 } + + hwSerdesAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Serdes interface of PHY chip abnormal." + ::= { hwDCTraps 141 } + + hwBoardAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Board is abnormal." + ::= { hwDCTraps 142 } + + hwFeChannelAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "FE data channel is abnormal" + ::= { hwDCTraps 143 } + + hwParityCheckAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Data parity check is abnormal" + ::= { hwDCTraps 144 } + + hwPhyClockAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The clock of PHY chip is abnormal." + ::= { hwDCTraps 145 } + + hwPortAutoNegotiateFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The ethernet port negotiate failed" + ::= { hwDCTraps 146 } + + hwPortSemiduplex NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The ethernet port work at semi duplex state." + ::= { hwDCTraps 147 } + + hwScuStartModeSetFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The start mode of SCU set failed" + ::= { hwDCTraps 148 } + + hwMemoryExhaust NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "MPU memory exhaust." + ::= { hwDCTraps 149 } + + hwMemoryExhaustClear NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "MPU memory usage resume to normal." + ::= { hwDCTraps 150 } + + hwMethAbnormal NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The Meth interface is abnormal." + ::= { hwDCTraps 151 } + + hwLpuNotTight NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "The LPU board is not tightly installed. Install the board again." + ::= { hwDCTraps 152 } + + hwLicenseFail NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "License fail." + ::= { hwDCTraps 153 } + + hwHaBatchBegin NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "No command line can be entered because batch backup is processing." + ::= { hwDCTraps 154 } + + hwHaBatchEnd NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Command lines can be entered because batch backup ends." + ::= { hwDCTraps 155 } + + hwHaSmoothBegin NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "No command line can be entered because data smooth is processing." + ::= { hwDCTraps 156 } + + hwHaSmoothEnd NOTIFICATION-TYPE + OBJECTS { entPhysicalName } + STATUS current + DESCRIPTION + "Command lines can be entered because data smooth ends." + ::= { hwDCTraps 157 } + hwDCTrapConformance OBJECT IDENTIFIER ::= { hwDCTrapMIB 3 } + +-- conformance information + hwDCTrapGroups OBJECT IDENTIFIER ::= { hwDCTrapConformance 1 } + +-- units of conformance + hwDCTrapControlGroup OBJECT-GROUP + OBJECTS { hwDCCtrlTrap, hwTunnelGroupID, hwDCTrapReason } + STATUS current + DESCRIPTION + "These objects are required to control traps + from hwDatacomm Traps systems." + ::= { hwDCTrapGroups 1 } + + hwDCNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { hwMPUSynClkFaulty, hwMPUSynClkFaultyResume, hwSlaveMPUNoResp, hwSlaveMPUNoRespResume, hwBrdChannelFaulty, + hwBrdChannelFaultyResume, hwBrdNofullin, hwBrdNofullinResume, hwBrdTypeNoMatchReset, hwBrdAutoSwtFail, + hwBrdAutoSwt, hwBrdClkLockERR, hwBrdClkLockERRResume, hwBrdRemoved, hwBrdUp, + hwClkSrcMiss, hwClkAllSrcLost, hwClkAllSrcLostResume, hwClkFail, hwClkFailResume, + hwClkNoHeartbeat, hwClkNoHeartbeatResume, hwLPULostSynAlarm, hwLPUOpenChannelError, hwLPUSlfTstErr, + hwLPU3ClkSwitch, hwSFULostHrtReset, hwSFULinkLostReset, hwSFUChannelLinkLost, hwSFUInChannelOpenFail, + hwVoltSensorFail, hwVoltSensorFailResume, hwVoltBtmC, hwVoltBtmCResume, hwVoltSprC, + hwVoltSprCResume, hwVoltBtmM, hwVoltBtmMResume, hwVoltSprM, hwVoltSprMResume, + hwTempSensorFail, hwTempSensorFailResume, hwTempMnr, hwTempMnrResume, hwTempMjr, + hwTempMjrResume, hwTempCtl, hwTempCtlResume, hwFanHFail, hwFanFail, + hwFanFailResume, hwFanAbsent, hwFanAbsentResume, hwFanCabUN, hwFanCabUNResume, + hwPwrFail, hwPwrFailResume, hwPwrAbsent, hwPwrAbsentResume, hwPwrCabUN, + hwPwrCabUNResume, hwLCDHFail, hwLCDFail, hwLCDAbsent, hwLCDAbsentResume, + hwLCDCabUN, hwLCDCabUNResume, hwROMFail, hwMonitorBUSFail, hwMonitorBUSFailResume, + hwWriteFlashError, hwBoardReset, hwBoardResetSuccess, hwSlaveMPUReset, hwMasterSlaveSwap, + hwRTCFail, hwExchangeChipFail, hwTempResume, hwOpticalModuleInsert, hwOpticalModuleRemove, + hwBoardOfflineChange, hwInterfacePhysicalDown, hwInterfacePhysicalUp, hwBTBStartupFileNameDifferent, hwBTBChassisRunningModeConflict, + hwBTBCtrlChannelFail, hwBTBCtrlChannelFailResume, hwBTBDataChannelFail, hwBTBDataChannelFailResume, hwBTBClkChannelFail, + hwBTBClkChannelFailResume, hwBTBSFUOpticInterfaceError, hwBTBSFUOpticInterfaceErrorResume, hwBTBVSRInterfaceInvalid, hwBTBVSRInterfaceInvalidResume, + hwBTBSlaveChassisNoHeart, hwBTBNoSlaveChassis, hwBTBSlaveChassisRegisted, hwBTBSlaveChassisRegisteFail, hwBTBChassisTypeConflict, + hwOpticaPowerAbnormal, hwFPGAAbnormal, hwBrdInserted, hwMinMTunnelDownAlarm, hwMinMTunnelUpAlarm, + hwSuperChangeSuccesful, hwSuperChangeFailure, hwEpldAbnormal, hwPhyChipAbnormal, hwSerdesAbnormal, + hwBoardAbnormal, hwFeChannelAbnormal, hwParityCheckAbnormal, hwPhyClockAbnormal, hwPortAutoNegotiateFail, hwPortSemiduplex, + hwScuStartModeSetFail, hwMemoryExhaust, hwMemoryExhaustClear, hwMethAbnormal, hwLpuNotTight,hwLicenseFail, + hwHaBatchBegin,hwHaBatchEnd,hwHaSmoothBegin,hwHaSmoothEnd} + STATUS current + DESCRIPTION + "The notification group defined for Datacomm products." + ::= { hwDCTrapGroups 2 } + + hwDCTrapCompliances OBJECT IDENTIFIER ::= { hwDCTrapConformance 2 } + +-- compliance statements + hwDCTrapCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement." + MODULE -- this module + MANDATORY-GROUPS { hwDCTrapControlGroup, hwDCNotificationGroup } + ::= { hwDCTrapCompliances 1 } + + + END -- cgit v1.2.3