From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/linksys/LINKSYS-LLDP-MIB | 725 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 725 insertions(+) create mode 100644 MIBS/linksys/LINKSYS-LLDP-MIB (limited to 'MIBS/linksys/LINKSYS-LLDP-MIB') diff --git a/MIBS/linksys/LINKSYS-LLDP-MIB b/MIBS/linksys/LINKSYS-LLDP-MIB new file mode 100644 index 0000000..658cf68 --- /dev/null +++ b/MIBS/linksys/LINKSYS-LLDP-MIB @@ -0,0 +1,725 @@ +LINKSYS-LLDP-MIB DEFINITIONS ::= BEGIN + +-- Title: LINKSYS LLDP ROS +-- Private LLDP MIB +-- Version: 7.42 +-- Date: 12 Dec 2005 + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32, + NOTIFICATION-TYPE + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TruthValue, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + rnd, rndNotifications + FROM LINKSYS-MIB + LldpPortList, LldpPortNumber, LldpManAddress + FROM LLDP-MIB + PortList + FROM Q-BRIDGE-MIB + Dscp + FROM DIFFSERV-DSCP-TC + AddressFamilyNumbers + FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB + lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex + FROM LLDP-MIB + LldpXMedCapabilities + FROM LLDP-EXT-MED-MIB + rndErrorDesc, rndErrorSeverity + FROM LINKSYS-DEVICEPARAMS-MIB; + + +rlLldp MODULE-IDENTITY + LAST-UPDATED "200506200000Z" + ORGANIZATION "Linksys LLC." + CONTACT-INFO + "www.linksys.com/business/support" + DESCRIPTION + "This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol)." + REVISION "200506200000Z" + DESCRIPTION + "Initial revision." + ::= { rnd 110 } + +rlLldpObjects OBJECT IDENTIFIER ::= { rlLldp 1 } + +rlLldpConfig OBJECT IDENTIFIER ::= { rlLldpObjects 1 } +rlLldpXMedConfig OBJECT IDENTIFIER ::= { rlLldpObjects 2 } + +PolicyNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Policy Number in the Media Policy Container. + + Policy numbers should be in the range of 1 and 32768 since 8 policies + can be configured for each particular port and the number of ports range is + 1 to 4096." + SYNTAX Integer32(1..32768) + +-- Policy Application Type Textual Convention + +PolicyContainerAppType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The media type that defines the primary function of the + application for the policy advertised by an endpoint. + + A value of voice(1) indicates that the media type defining + a primary function of the application for the policy advertised on + the local port is voice. + + A value of voiceSignaling(3) indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is voice signaling. + + A value of guestVoice(4) indicates that the media type + Defining a primary function of the application for the policy + advertised on the local port is guest voice. + + A value of guestVoiceSignaling(5) indicates that the media + type defining a primary function of the application for the policy + advertised on the local port is guest voice signaling. + + A value of softPhoneVoice(6) indicates that the media type + Defining a primary function of the application for the policy + advertised on the local port is softphone voice. + + A value of videoConferencing(7) indicates that the media + type defining a primary function of the application for the policy + advertised on the local port is voice. + + A value of streamingVideo(8) indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is streaming video. + + A value of videoSignaling(2) indicates that the media type + defining a primary function of the application for the policy + advertised on the local port is video signaling." + SYNTAX INTEGER { + unknown(0), + voice(1), + voiceSignaling(2), + guestVoice(3), + guestVoiceSignaling(4), + softPhoneVoice(5), + videoconferencing(6), + streamingVideo(7), + videoSignaling(8) + } + + +PolicyAppVoiceUpdateMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "" + SYNTAX INTEGER { + manual(0), + auto(1) + } + +rlLldpEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this variable to 'true' will globally enable the LLDP feature + (both transmit and receive functionalities). Setting this variable + to 'false' will globally disable the LLDP feature. Thus, the + administratively desired status of a local port is determined by + both this variable and the MIB lldpPortConfigAdminStatus." + ::= { rlLldpConfig 1 } + +rlLldpClearRx OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of ports that are identified by a PortList, in which + each port is represented as a bit. + Clears the Rx information about the remote agents accordingly to the + specified PortList. + The default value for rlLldpClearRx object is an empty binary string, + which means no ports are specified to be cleared from the Rx Info. + This object behaviors as an event (write-only) than + reading this object always results in an Empty Port List of length zero." + REFERENCE + "" + DEFVAL { ''H } -- empty octet string + ::= { rlLldpConfig 2 } + +rlLldpDuMode OBJECT-TYPE + SYNTAX INTEGER { + filtering(1), + flooding(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action with LLDPDU upon globally disabled LLDP. + + If the associated rlLldpDuMode object has a value of + 'filtering(1)', then received frames are containing LLDPDU + will be dropped. + + If the associated rlLldpDuMode object has a value of + 'flooding(2)', then received frames are containing LLDPDU + will flood all active ports." + REFERENCE + "Linksys LLDP System Specifications" + DEFVAL { filtering } + ::= { rlLldpConfig 3 } + +rlLldpAutoAdvLocPortManAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlLldpAutoAdvLocPortManAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains automaticaly selected management address, + advertised on the local port." + REFERENCE + "Linksys LLDP" + ::= { rlLldpConfig 4 } + +rlLldpAutoAdvLocPortManAddrEntry OBJECT-TYPE + SYNTAX RlLldpAutoAdvLocPortManAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a local port, which advertises the Management + address automatically. Entry also included an interface number, on + which the Management address is assigned. + Each management address should have distinct 'management address + type' (rlLldpAutoAdvManAddrSubtype) and 'management address' + (rlLldpAutoAdvManAddr)." + + INDEX { rlLldpAutoAdvLocPortNum } + ::= { rlLldpAutoAdvLocPortManAddrTable 1 } + +RlLldpAutoAdvLocPortManAddrEntry ::= SEQUENCE { + rlLldpAutoAdvLocPortNum LldpPortNumber, + rlLldpAutoAdvManAddrOwnerIfId Integer32, + rlLldpAutoAdvManAddrNone TruthValue, + rlLldpAutoAdvManAddrSubtype AddressFamilyNumbers, + rlLldpAutoAdvManAddr LldpManAddress, + rlLldpAutoAdvPortsStatus RowStatus +} + +rlLldpAutoAdvLocPortNum OBJECT-TYPE + SYNTAX LldpPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value used to identify the port component + (contained in the local chassis with the LLDP agent) + associated with this entry. + + The value of this object is used as a port index to the + rlLldpAutoAdvLocPortManAddrTable." + ::= { rlLldpAutoAdvLocPortManAddrEntry 1 } + +rlLldpAutoAdvManAddrOwnerIfId OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The integer value is used to identify the interface number + (port, trunk or vlan). The management address, automatically + advertised from associated 'rlLldpAutoAdvLocPortNum'local port is + assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface. + In case of 0 the management address is automatically calculated + without care to the ifIndex it was defined on." + DEFVAL { 0 } + ::= { rlLldpAutoAdvLocPortManAddrEntry 2 } + +rlLldpAutoAdvManAddrNone OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value of 'true' indicates that the any management address hasn't advertised + by the local port. Moreover, the configuration of automatic management address + advertisment is disabled. + A value of 'false' indicates that the configuration of automatic management address + advertisment is enabled." + DEFVAL { false } + ::= { rlLldpAutoAdvLocPortManAddrEntry 3 } + +rlLldpAutoAdvManAddrSubtype OBJECT-TYPE + SYNTAX AddressFamilyNumbers + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of management address identifier encoding used in + the associated 'rlLldpAutoAdvManAddr' object." + ::= { rlLldpAutoAdvLocPortManAddrEntry 4 } + +rlLldpAutoAdvManAddr OBJECT-TYPE + SYNTAX LldpManAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The string value used to identify the management address is + automaticaly advertised by local port, and assigned on the + associated 'rlLldpAutoAdvManAddrOwnerIfId' interface." + ::= { rlLldpAutoAdvLocPortManAddrEntry 5 } + +rlLldpAutoAdvPortsStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to + row installation and removal conventions." + ::= { rlLldpAutoAdvLocPortManAddrEntry 6 } + +--rlLldpLocChassisId OBJECT-TYPE +-- SYNTAX OCTET STRING(SIZE(1..20)) +-- MAX-ACCESS read-write +-- STATUS current +-- DESCRIPTION +-- "The string value used to identify the chassis component associated +-- with the local system. As a result of updating this variable, +-- lldpLocChassisid will have the same value, and the MIB +-- lldpLocChassisIdSubtype will have the value local(7). " +-- ::= { rlLldp 2} + + + +------------------------------------------------------------------------------ +-- LLDP-MED - Local Device Configuration +------------------------------------------------------------------------------ +--- +--- rlLldpXMedLocMediaPolicyContainerTable: Local Media Policy Container +--- Configuration Table +--- +--- +rlLldpXMedLocMediaPolicyContainerTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlLldpXMedLocMediaPolicyContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains one row per policy number + of media policy container configuration." + ::= { rlLldpXMedConfig 1 } + +rlLldpXMedLocMediaPolicyContainerEntry OBJECT-TYPE + SYNTAX RlLldpXMedLocMediaPolicyContainerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Configuration of a particular policy in the media policy container." + INDEX { rlLldpXMedLocMediaPolicyContainerIndex } + ::= { rlLldpXMedLocMediaPolicyContainerTable 1 } + +RlLldpXMedLocMediaPolicyContainerEntry ::= SEQUENCE { + rlLldpXMedLocMediaPolicyContainerIndex PolicyNumber, + rlLldpXMedLocMediaPolicyContainerAppType PolicyContainerAppType, + rlLldpXMedLocMediaPolicyContainerVlanID Integer32, + rlLldpXMedLocMediaPolicyContainerPriority Integer32, + rlLldpXMedLocMediaPolicyContainerDscp Dscp, + rlLldpXMedLocMediaPolicyContainerUnknown TruthValue, + rlLldpXMedLocMediaPolicyContainerTagged TruthValue, + rlLldpXMedLocMediaPolicyContainerPorts PortList, + rlLldpXMedLocMediaPolicyContainerRowStatus RowStatus +} + +rlLldpXMedLocMediaPolicyContainerIndex OBJECT-TYPE + SYNTAX PolicyNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value used to identify the Media Policy + associated with this entry. + The value of this object is used as a policy number index to the + rlLldpXMedLocMediaPolicyContainerTable." + ::= { rlLldpXMedLocMediaPolicyContainerEntry 1 } + +rlLldpXMedLocMediaPolicyContainerAppType OBJECT-TYPE + SYNTAX PolicyContainerAppType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The media type that defines the primary function of the + application for the policy advertised by an endpoint." + REFERENCE + "ANSI/TIA-1057, Section 10.2.3.1" + ::= { rlLldpXMedLocMediaPolicyContainerEntry 2 } + +rlLldpXMedLocMediaPolicyContainerVlanID OBJECT-TYPE + SYNTAX Integer32 (0|1..4094|4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An extension of the VLAN Identifier for the port, + as defined in IEEE 802.1P-1998. + + A value of 1 through 4094 is used to define a valid PVID. + + A value of 0 shall be used if the device is using priority tagged + frames, meaning that only the 802.1p priority level is significant + and the default VID of the ingress port is being used instead. + + A value of 4095 is reserved for implementation use." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.5" + DEFVAL { 0 } + ::= { rlLldpXMedLocMediaPolicyContainerEntry 3 } + +rlLldpXMedLocMediaPolicyContainerPriority OBJECT-TYPE + SYNTAX Integer32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object contains the value of the 802.1p priority + which is associated with the given port on the + local system." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.6 " + DEFVAL { 0 } + ::= { rlLldpXMedLocMediaPolicyContainerEntry 4 } + +rlLldpXMedLocMediaPolicyContainerDscp OBJECT-TYPE + SYNTAX Dscp + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object contains the value of the Differentiated Service + Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 + which is associated with the given port on the local system." + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.7" + DEFVAL { 0 } + ::= { rlLldpXMedLocMediaPolicyContainerEntry 5 } + +rlLldpXMedLocMediaPolicyContainerUnknown OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value of 'true' indicates that the + network policy for the specified application type is + currently unknown. In this case, the VLAN ID, the + layer 2 priority and the DSCP value fields are ignored. + A value of 'false' indicates that this network policy + is defined " + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.2" + DEFVAL { false } + ::= { rlLldpXMedLocMediaPolicyContainerEntry 6 } + +rlLldpXMedLocMediaPolicyContainerTagged OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value of 'true' indicates that the application is using a + tagged VLAN. + A value of 'false' indicates that for the specific application + the device either is using an untagged VLAN or does not + support port based VLAN operation. In this case, both the + VLAN ID and the Layer 2 priority fields are ignored and + only the DSCP value has relevance " + REFERENCE + " ANSI/TIA-1057, Section 10.2.3.3" + DEFVAL { false } + ::= { rlLldpXMedLocMediaPolicyContainerEntry 7 } + +rlLldpXMedLocMediaPolicyContainerPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A set of ports that are identified by a PortList, in which + each port is represented as a bit. The local Media Policy Number + will be associated with (or attached to) the ports specified at + the rlLldpXMedLocMediaPolicyContainerPorts. + + The default value for rlLldpXMedLocMediaPolicyContainerPorts object + is empty binary string, which means no ports are specified + for advertising indicated management address instance." + REFERENCE + "IEEE 802.1AB-2004 10.2.1.1" + DEFVAL { ''H } -- empty binary string + ::= { rlLldpXMedLocMediaPolicyContainerEntry 8 } + +rlLldpXMedLocMediaPolicyContainerRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to + row installation and removal conventions." + ::= { rlLldpXMedLocMediaPolicyContainerEntry 9 } + +------------------------------------------------------------------------------ +-- LLDP - TX TLV overloading +------------------------------------------------------------------------------ + + +rlLldpTLVsTxOverloadingTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that show the which of the LLDP TLVs are not transmitted + on individual ports due to insufficient room in the frame + and the size of each TLV." + ::= { rlLldpObjects 3 } + + +rlLldpTLVsTxOverloadingEntry OBJECT-TYPE + SYNTAX RlLldpTLVsTxOverloadingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "LLDP TX overloading information that shows the + transmission of TLVs on LLDP transmission capable ports." + INDEX { rlLldpTxOverloadingPortNum, + rlLldpTxOverloadingIndex } + ::= { rlLldpTLVsTxOverloadingTable 1 } + +RlLldpTLVsTxOverloadingEntry ::= SEQUENCE { + rlLldpTxOverloadingPortNum LldpPortNumber, + rlLldpTxOverloadingIndex Unsigned32, + rlLldpTxOverloadingGroupId INTEGER, + rlLldpTLVsTxSize Unsigned32, + rlLldpTLVsTxGroupOverloading TruthValue, + rlLldpTLVsTxLeftSize Unsigned32 +} + +rlLldpTxOverloadingPortNum OBJECT-TYPE + SYNTAX LldpPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " The value of this object is used as a port index to the + TLVs TX overloading Table ." + ::= { rlLldpTLVsTxOverloadingEntry 1 } + +rlLldpTxOverloadingIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The sequence number of the group into sent LLDP PPDU starting from 1." + ::= { rlLldpTLVsTxOverloadingEntry 2 } + +rlLldpTxOverloadingGroupId OBJECT-TYPE + SYNTAX INTEGER { + -- LLDP mandatory TLVs + mandatory(1), + optional(2), + -- LLDP MED + medCap(3), + medLocation(4), + medNetPolicy(5), + medPoe(6), + -- LLDP MED - Inventory + medInventory(7), + -- 802.3 TLVs + xDot3(8), + -- 802.1 TLVs + xDot1(9), + -- DCBX TLVs + dcbx(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the TLVs groups. + A value of mandatory(1) defines LLDP mandatory TLVs group + A value of optinal(2) defines LLDP optional TLVs group + A value of medCap(3) defines LLDP MED - Capabilities group + A value of medLocation(4) defines LLDP MED - Location group + A value of medNetPolicy(5) defines LLDP MED - Network Policy group + A value of medPoe(6) defines LLDP MED - Extended Power via MDI group + A value of medInventory(7) defines LLDP MED - Inventory group + A value of Xdot3(8) defines 802.3 TLVs group + A value of Xdot1(9) defines 802.1 TLVs group " + ::= { rlLldpTLVsTxOverloadingEntry 3 } + +rlLldpTLVsTxSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The size of the TLV in Bytes." + ::= { rlLldpTLVsTxOverloadingEntry 4 } + +rlLldpTLVsTxGroupOverloading OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded + and the value of left size is negative" + ::= { rlLldpTLVsTxOverloadingEntry 5 } + +rlLldpTLVsTxLeftSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The size in Bytes of the available space left in the LLDPDU after adding the TLVs group. + In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for the TLVs group + and this is the size of the additional scpace that required for the TLVs group" + + ::= { rlLldpTLVsTxOverloadingEntry 6 } + +------------------------------------------------------------------------------ +-- LLDP - TX TLV overloading Size +------------------------------------------------------------------------------ + +rlLldpTLVsTxOverloadingSizeTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingSizeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that show the total size of the all TLVs + and the LLDPDU free size ." + ::= { rlLldpObjects 4 } + +rlLldpTLVsTxOverloadingSizeEntry OBJECT-TYPE + SYNTAX RlLldpTLVsTxOverloadingSizeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "LLDP TX overloading information" + INDEX { rlLldpTxOverloadingPortNum } + ::= { rlLldpTLVsTxOverloadingSizeTable 1 } + +RlLldpTLVsTxOverloadingSizeEntry ::= SEQUENCE { + + -- LLDP Total and Left Size + rlLldpTotalTLVsTxSize Unsigned32, + rlLldpTLVsTxOverloading TruthValue, + rlLldpLeftTLVsTxSize Unsigned32 +} + +rlLldpTotalTLVsTxSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The Total size of all TLVs group in Bytes." + ::= { rlLldpTLVsTxOverloadingSizeEntry 2 } + +rlLldpTLVsTxOverloading OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded + and the value of left size is negative" + ::= { rlLldpTLVsTxOverloadingSizeEntry 3 } + +rlLldpLeftTLVsTxSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The size in Bytes of the available space left in the LLDPDU after adding all TLVs group. + In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for all the TLVs group + and this is the size of the additional scpace that required for all the TLVs group" + ::= { rlLldpTLVsTxOverloadingSizeEntry 4 } + +------------------------------------------------------------------------------ +-- LLDP - TX TLV overloading port list +------------------------------------------------------------------------------ + +rlLldpTLVsTxOverloadingPorts OBJECT-TYPE + SYNTAX PortList + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port list that represent the overloading state of each port" + ::= { rlLldpObjects 5 } + +------------------------------------------------------------------------------ +-- LLDP - TX TLV overloading trap +------------------------------------------------------------------------------ +rlLldpTLVsTxOverloadingStateEnterTrap NOTIFICATION-TYPE + OBJECTS { rndErrorDesc, rndErrorSeverity } + STATUS current + DESCRIPTION + "Informational trap indicating that the port has entered the overloading state." + ::= { rndNotifications 209 } + +rlLldpTLVsTxOverloadingStateExitTrap NOTIFICATION-TYPE + OBJECTS { rndErrorDesc, rndErrorSeverity } + STATUS current + DESCRIPTION + "Informational trap indicating that the port is no longer in the overloading state.." + ::= { rndNotifications 210 } + + +------------------------------------------------------------------------------ +-- LLDP - MED Local Voice VLAN update mode +------------------------------------------------------------------------------ + +rlLldpXMedNetPolVoiceUpdateMode OBJECT-TYPE + SYNTAX PolicyAppVoiceUpdateMode + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "" + ::= { rlLldpObjects 7 } + +------------------------------------------------------------------------------ +-- LLDP - Remote Time to Live +------------------------------------------------------------------------------ + +rlLldpRemTtlTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlLldpRemTtlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the remote device Time To Live LLDP TLV." + ::= { rlLldpObjects 8 } + +rlLldpRemTtlEntry OBJECT-TYPE + SYNTAX RlLldpRemTtlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "LLDP Time To TTL remove TLV. + This uses the key as defind in lldpRemTable of the LLDP-MIB." + INDEX { lldpRemTimeMark, + lldpRemLocalPortNum, + lldpRemIndex } + ::= { rlLldpRemTtlTable 1 } + +RlLldpRemTtlEntry ::= SEQUENCE { + rlLldpRemTtl Unsigned32 +} + +rlLldpRemTtl OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains the remote device Time To Live LLDP TLV." + ::= { rlLldpRemTtlEntry 1 } + +rlLldpChassisIdSubtype OBJECT-TYPE + SYNTAX INTEGER { + macAddress(4), + local(7) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of encoding used to identify the chassis + associated with the local system." + + REFERENCE + "IEEE 802.1AB-2004 9.5.2.2" + DEFVAL { macAddress } + ::= { rlLldpConfig 5 } + + +END + -- cgit v1.2.3