From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/radlan/RADLAN-IPv6 | 1949 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1949 insertions(+) create mode 100644 MIBS/radlan/RADLAN-IPv6 (limited to 'MIBS/radlan/RADLAN-IPv6') diff --git a/MIBS/radlan/RADLAN-IPv6 b/MIBS/radlan/RADLAN-IPv6 new file mode 100644 index 0000000..a4d3811 --- /dev/null +++ b/MIBS/radlan/RADLAN-IPv6 @@ -0,0 +1,1949 @@ +RADLAN-IPv6 DEFINITIONS ::= BEGIN + +-- Title: RADLAN IPv6 Private Extension +-- Version: 7.60.00.00 +-- Date: 25 Sep 2011 + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Counter32, IpAddress, + mib-2, Unsigned32, Counter64, + zeroDotZero, Gauge32 FROM SNMPv2-SMI + TimeInterval, TruthValue, DisplayString, RowStatus + FROM SNMPv2-TC + rnd FROM RADLAN-MIB + ipSpec FROM RADLAN-IP + ipAddressEntry, ipv6InterfaceEntry FROM IP-MIB + ipNetToPhysicalEntry FROM IP-MIB + inetCidrRouteEntry FROM IP-FORWARD-MIB + InterfaceIndex, InterfaceIndexOrZero + FROM IF-MIB + InetAddressPrefixLength, InetAddressType, InetAddress, + InetAutonomousSystemNumber + FROM INET-ADDRESS-MIB + ipv6RouterAdvertEntry FROM IP-MIB + IANAipRouteProtocol FROM IANA-RTPROTO-MIB + IANAtunnelType FROM IANAifType-MIB; + + +rlIPv6 MODULE-IDENTITY + LAST-UPDATED "200809250000Z" + ORGANIZATION "Marvell Semiconductor, Inc." + CONTACT-INFO + "www.marvell.com" + DESCRIPTION + "The private MIB module definition for IPv6 MIB." + REVISION "200809250000Z" + DESCRIPTION + "Initial version of this MIB." + ::= { rnd 129 } + + +--- IpAddressTable augmentation + +rlIpAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parallel to ipAddressTable, and is used to + add/delete IPv6 entries to/from that table. It contains + private objects." + ::= { ipSpec 19 } + +rlIpAddressEntry OBJECT-TYPE + SYNTAX RlIpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An address mapping for a particular interface." + AUGMENTS { ipAddressEntry } + ::= { rlIpAddressTable 1 } + +RlIpAddressEntry ::= SEQUENCE { + rlIpAddressPrefixLength InetAddressPrefixLength, + rlIpAddressType INTEGER + } + +rlIpAddressPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The prefix length of this address." + DEFVAL { 64 } + ::= { rlIpAddressEntry 1 } + +rlIpAddressType OBJECT-TYPE + SYNTAX INTEGER { + unicast(1), + anycast(2), + broadcast(3), + multicast(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Extend standard field ipAddressType to multicast" + DEFVAL { unicast } + ::= { rlIpAddressEntry 2 } + +--- ipv6InterfaceTable augmentation + +rlipv6InterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rlipv6InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parallel to ipv6InterfaceTable, and is used to + configure additional interface parameters." + ::= { ipSpec 20 } + +rlipv6InterfaceEntry OBJECT-TYPE + SYNTAX Rlipv6InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional configuration parameters for a particular interface." + AUGMENTS { ipv6InterfaceEntry } + ::= { rlipv6InterfaceTable 1 } + +Rlipv6InterfaceEntry ::= SEQUENCE { + rlipv6InterfaceNdDadAttemps INTEGER, + rlipv6InterfaceAutoconfigEnable INTEGER, + rlipv6InterfaceIcmpUnreachSendEnable INTEGER, + rlipv6InterfaceLinkMTU Unsigned32, + rlipv6InterfaceMLDVersion Unsigned32, + rlipv6InterfaceRetransmitTime Unsigned32, + rlipv6InterfaceIcmpRedirectSendEnable INTEGER + } + +rlipv6InterfaceNdDadAttemps OBJECT-TYPE + SYNTAX INTEGER (0..600) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ND Duplicated address detection number of attempts." + DEFVAL { 0 } + ::= { rlipv6InterfaceEntry 1 } + +rlipv6InterfaceAutoconfigEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enables or disables Stateless Address Auto configuration + on specific interface." + DEFVAL { enable } + ::= { rlipv6InterfaceEntry 2 } + +rlipv6InterfaceIcmpUnreachSendEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enables or disables sending of ICMP Destination Unreachable + Error on specific interface." + DEFVAL { enable } + ::= { rlipv6InterfaceEntry 3 } + +rlipv6InterfaceLinkMTU OBJECT-TYPE + SYNTAX Unsigned32 (1280..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum transmission unit (MTU) size of IPv6 packets + sent on an interface in bytes." + DEFVAL { 1500 } + ::= { rlipv6InterfaceEntry 4 } + +rlipv6InterfaceMLDVersion OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Set version of MLD protocol on specific interface." + DEFVAL { 2 } + ::= { rlipv6InterfaceEntry 5 } + +rlipv6InterfaceRetransmitTime OBJECT-TYPE + SYNTAX Unsigned32 (0 | 1000..3600000) + UNITS "milliseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This value will be included in all IPv6 router advertisements sent + out this interface. Very short intervals are not recommended in + normal IPv6 operation. When a nondefault value is configured, the + configured time is both advertised and used by the router itself. + When value 0 is configured, 0 seconds (unspecified) advertised in + router advertisements and the value 1000 milliseconds is used for + the neighbor discovery activity of the router itself." + DEFVAL { 0 } + ::= { rlipv6InterfaceEntry 6 } + +rlipv6InterfaceIcmpRedirectSendEnable OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Enables or disables sending of ICMP IPv6 redirect messages to + re-send a packet through the same interface on which the packet was + received." + DEFVAL { enable } + ::= { rlipv6InterfaceEntry 7 } + +--- inetCidrRoutetable augmentation + +rlinetCidrRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlinetCidrRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parallel to inetCidrRouteTable, and is used to + configure or display additional route parameters." + ::= { ipSpec 21 } + +rlinetCidrRouteEntry OBJECT-TYPE + SYNTAX RlinetCidrRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional parameters for a particular route." + AUGMENTS { inetCidrRouteEntry } + ::= { rlinetCidrRouteTable 1 } + +RlinetCidrRouteEntry ::= SEQUENCE { + rlinetCidrRouteLifetime Unsigned32, + rlinetCidrRouteInfo INTEGER + } + +rlinetCidrRouteLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remaining length of time, in seconds, that this route + will continue to be valid, i.e., time until deprecation. + A value of 4,294,967,295 represents infinity." + DEFVAL { 4294967295 } + ::= { rlinetCidrRouteEntry 1 } + +rlinetCidrRouteInfo OBJECT-TYPE + SYNTAX INTEGER { + none(0), + ospfIntraArea(1), + ospfInterArea(2), + ospfExternalType1(3), + ospfExternalType2(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A reference to MIB definitions specific to the particular routing + protocol which is responsible for this route, as determined by the + value specified in the route's inetCidrRouteProto value." + DEFVAL { none } + ::= { rlinetCidrRouteEntry 2 } + + +--- ipNetToPhysicalTable augmentation + +rlipNetToPhysicalTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlipNetToPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parallel to ipNetToPhysicalTable, and is used to + configure or display additional neighbor parameters." + ::= { ipSpec 22 } + +rlipNetToPhysicalEntry OBJECT-TYPE + SYNTAX RlipNetToPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional parameters for a neighbor" + AUGMENTS { ipNetToPhysicalEntry } + ::= { rlipNetToPhysicalTable 1 } + +RlipNetToPhysicalEntry ::= SEQUENCE { + rlipNetToPhysicalIsRouter TruthValue, + rlipNetToPhysicalReachableConfirmed Unsigned32 + } + +rlipNetToPhysicalIsRouter OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object has the value 'true(1)', if the neighbor + is router; otherwise, the value is 'false(2)'." + ::= { rlipNetToPhysicalEntry 1 } + +rlipNetToPhysicalReachableConfirmed OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time (in seconds) since the address was confirmed to be reachable. + Only, relevant for dynamic entries." + ::= { rlipNetToPhysicalEntry 2 } + + +--- ICMPv6 Rate Limiting + +rlipv6IcmpErrorRatelimitInterval OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time interval between tokens being placed in the bucket, + each token represents a single ICMP error message. + The interval measured in milliseconds." + DEFVAL { 100 } + ::= { rlIPv6 1 } + +rlipv6IcmpErrorRatelimitBucketSize OBJECT-TYPE + SYNTAX INTEGER(1..200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of tokens stored in the bucket, + each token represents a single ICMP error message." + DEFVAL { 10 } + ::= { rlIPv6 2 } + + +--- IPv6 Link Local Default Zone + +rlipv6LLDefaultZone OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The interface which would be used as the egress interface + for packets sent without a specified IPv6Z interface identifier + or with the default '0' identifier. Zero value means no default + interface specified." + DEFVAL { 0 } + ::= { rlIPv6 3 } + +--- rlIpv6GeneralPrefixTable + +rlIpv6GeneralPrefixTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6GeneralPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines general prefix description, + based on which a number of longer, more specific, prefixes can + be defined." + ::= { rlIPv6 4 } + +rlIpv6GeneralPrefixEntry OBJECT-TYPE + SYNTAX RlIpv6GeneralPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Single entry in general prefix table." + INDEX {rlIpv6GeneralPrefixName} + ::= { rlIpv6GeneralPrefixTable 1 } + +RlIpv6GeneralPrefixEntry ::= SEQUENCE { + rlIpv6GeneralPrefixName DisplayString, + rlIpv6GeneralPrefixInetAddrType InetAddressType, + rlIpv6GeneralPrefixInetAddr InetAddress, + rlIpv6GeneralPrefixInetAddrPrefixLength InetAddressPrefixLength, + rlIpv6GeneralPrefixInterfaceId Unsigned32, + rlIpv6GeneralPrefixRowStatus RowStatus + } + +rlIpv6GeneralPrefixName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name assigned to the prefix." + ::= { rlIpv6GeneralPrefixEntry 1 } + +rlIpv6GeneralPrefixInetAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Prefix inet address type. Has to be IPv6." + ::= { rlIpv6GeneralPrefixEntry 2 } + +rlIpv6GeneralPrefixInetAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The IPv6 network assigned to the general prefix. + This argument must be in the form documented in RFC4293 + where the address is specified in hexadecimal using 16-bit values + between colons." + ::= { rlIpv6GeneralPrefixEntry 3 } + +rlIpv6GeneralPrefixInetAddrPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the inet address + before being compared to the value in the + rlIpv6GeneralPrefixInetAddr field." + ::= { rlIpv6GeneralPrefixEntry 4 } + +rlIpv6GeneralPrefixInterfaceId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Interface id to use when creating prefix based on point-to-point interface." + ::= { rlIpv6GeneralPrefixEntry 5 } + +rlIpv6GeneralPrefixRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Row status." + ::= { rlIpv6GeneralPrefixEntry 6 } + + +--- IPv6 maximum number of hops + +rlipv6MaximumHopsNumber OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum number of hops used in router advertisements and all IPv6 packets that + are originated by the router." + DEFVAL { 64 } + ::= { rlIPv6 5 } + +--- rlIpv6RouterAdvertPrefixTable + +rlIpv6RouterAdvertPrefixTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6RouterAdvertPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines IPv6 prefixes which are included in IPv6 Neighbor + Discovery (ND) router advertisements." + ::= { rlIPv6 6 } + +rlIpv6RouterAdvertPrefixEntry OBJECT-TYPE + SYNTAX RlIpv6RouterAdvertPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Single entry in Neighbor Discovery Prefix table." + INDEX {rlIpv6RouterAdvertPrefixIfIndex, + rlIpv6RouterAdvertPrefixIsDefault, + rlIpv6RouterAdvertPrefixInetAddrType, + rlIpv6RouterAdvertPrefixInetAddr, + rlIpv6RouterAdvertPrefixInetAddrPrefixLength} + ::= { rlIpv6RouterAdvertPrefixTable 1 } + +RlIpv6RouterAdvertPrefixEntry ::= SEQUENCE { + rlIpv6RouterAdvertPrefixIfIndex InterfaceIndex, + rlIpv6RouterAdvertPrefixIsDefault TruthValue, + rlIpv6RouterAdvertPrefixInetAddrType InetAddressType, + rlIpv6RouterAdvertPrefixInetAddr InetAddress, + rlIpv6RouterAdvertPrefixInetAddrPrefixLength InetAddressPrefixLength, + rlIpv6RouterAdvertPrefixAdminStatus INTEGER, + rlIpv6RouterAdvertPrefixAdvertise TruthValue, + rlIpv6RouterAdvertPrefixOnLinkStatus INTEGER, + rlIpv6RouterAdvertPrefixAutonomousFlag TruthValue, + rlIpv6RouterAdvertPrefixAdvPreferredLifetime Unsigned32, + rlIpv6RouterAdvertPrefixAdvValidLifetime Unsigned32, + rlIpv6RouterAdvertPrefixRowStatus RowStatus + } + +rlIpv6RouterAdvertPrefixIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface on + which this prefix is configured. The interface identified + by a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { rlIpv6RouterAdvertPrefixEntry 1 } + +rlIpv6RouterAdvertPrefixIsDefault OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates whether this object belongs to 'default' entry. + Default entry contains specifics about advertising prefixes which + were created from local ipv6 addresses." + ::= { rlIpv6RouterAdvertPrefixEntry 2 } + +rlIpv6RouterAdvertPrefixInetAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Prefix inet address type. Has to be IPv6." + ::= { rlIpv6RouterAdvertPrefixEntry 3 } + +rlIpv6RouterAdvertPrefixInetAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 network prefix to include in router advertisements. + This argument must be in the form documented in RFC4293 where + the address is specified in hexadecimal using 16-bit values between + colons." + ::= { rlIpv6RouterAdvertPrefixEntry 4 } + +rlIpv6RouterAdvertPrefixInetAddrPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The length of the IPv6 prefix. A decimal value that indicates + how many of the high-order contiguous bits of the address comprise + the prefix (the network portion of the address)." + ::= { rlIpv6RouterAdvertPrefixEntry 5 } + +rlIpv6RouterAdvertPrefixAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enable(1), + disable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Admin status of the entry. Relevant only for default entry." + DEFVAL { enable } + ::= { rlIpv6RouterAdvertPrefixEntry 6 } + +rlIpv6RouterAdvertPrefixAdvertise OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Whether the prefix is included in router advertisements." + DEFVAL { true } + ::= { rlIpv6RouterAdvertPrefixEntry 7 } + +rlIpv6RouterAdvertPrefixOnLinkStatus OBJECT-TYPE + SYNTAX INTEGER { + onlink (1), -- connected prefix + not-onlink (2), -- connected state of the prefix is not specified + off-link (3) -- not connected prefix + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If object has the value 'onlink(1)', this prefix is confidered as on-link. + This prefix will be advertised with the L-bit set and will be present + in the Routing Table. + If object has the value 'not-onlink(2)', this prefix will be advertised + with the L-bit clear, but connected state of the prefix will not be changed. + If object has the value 'offlink(3)', this prefix is confidered as on-link. + This prefix will be advertised with the L-bit clear, and will be + not present in the Routing Table." + DEFVAL { onlink } + ::= { rlIpv6RouterAdvertPrefixEntry 8 } + +rlIpv6RouterAdvertPrefixAutonomousFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If object has the value 'true(1)', this prefix indicates to hosts on + the local link that the specified prefix can be used for IPv6 + autoconfiguration. The prefix will be advertised with the A-bit set." + DEFVAL { true } + ::= { rlIpv6RouterAdvertPrefixEntry 9 } + +rlIpv6RouterAdvertPrefixAdvPreferredLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of time (in seconds) that the specified IPv6 prefix is + advertised as being preferred." + DEFVAL { 604800 } + ::= { rlIpv6RouterAdvertPrefixEntry 10 } + +rlIpv6RouterAdvertPrefixAdvValidLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The amount of time (in seconds) that the specified IPv6 prefix is + advertised as being valid." + DEFVAL { 2592000 } + ::= { rlIpv6RouterAdvertPrefixEntry 11 } + +rlIpv6RouterAdvertPrefixRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Row status." + ::= { rlIpv6RouterAdvertPrefixEntry 12 } + + +--- ipv6RouterAdvertTable augmentation + +rlIpv6RouterAdvertTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6RouterAdvertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is parallel to inetCidrRouteTable, and is used to + configure or display additional route parameters." + ::= { rlIPv6 7 } + +rlIpv6RouterAdvertEntry OBJECT-TYPE + SYNTAX RlIpv6RouterAdvertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional parameters for a particular route." + AUGMENTS { ipv6RouterAdvertEntry } + ::= { rlIpv6RouterAdvertTable 1 } + +RlIpv6RouterAdvertEntry ::= SEQUENCE { + rlIpv6RouterAdvertAdvIntervalOption TruthValue, + rlIpv6RouterAdvertRouterPreference INTEGER, + rlIpv6RouterAdvertIsCurHopLimitUserConfigured TruthValue + } + +rlIpv6RouterAdvertAdvIntervalOption OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates to a visiting mobile node the interval at which that node + may expect to receive RAs. The node may use this information in its + movement detection algorithm." + DEFVAL { false } + ::= { rlIpv6RouterAdvertEntry 1 } + +rlIpv6RouterAdvertRouterPreference OBJECT-TYPE + SYNTAX INTEGER { + low(1), + medium(2), + high(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Configures a default router preference (DRP) for the router on a specific interface." + DEFVAL { medium } + ::= { rlIpv6RouterAdvertEntry 2 } + +rlIpv6RouterAdvertIsCurHopLimitUserConfigured OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates that hop limit value used in router advertisement is + an user configured value and not necessarily value that is used by + router itself." + DEFVAL { false } + ::= { rlIpv6RouterAdvertEntry 3 } + +--- Clear IPv6 routes + +rlipv6InetCidrTableClear OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This scalar indicates to clear all ipv6 routes from inetCidrTable." + ::= { rlIPv6 8 } + + +--- rlIpv6PathMtuTable + +rlIpv6PathMtuTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6PathMtuEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table used to represent all Path MTU changes to specific destination + received from 'packet-too-big' messages." + ::= { rlIPv6 9 } + +rlIpv6PathMtuEntry OBJECT-TYPE + SYNTAX RlIpv6PathMtuEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Single entry in Path MTU table." + INDEX {rlIpv6PathMtuEntryInetDestAddrType, + rlIpv6PathMtuEntryInetDestAddr} + ::= { rlIpv6PathMtuTable 1 } + +RlIpv6PathMtuEntry ::= SEQUENCE { + rlIpv6PathMtuEntryInetDestAddrType InetAddressType, + rlIpv6PathMtuEntryInetDestAddr InetAddress, + rlIpv6PathMtuEntryMtu Unsigned32, + rlIpv6PathMtuEntryAge Unsigned32 + } + +rlIpv6PathMtuEntryInetDestAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Prefix inet address type. Has to be IPv6." + ::= { rlIpv6PathMtuEntry 1 } + +rlIpv6PathMtuEntryInetDestAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 destination address for which packet-too-big message + was received. + This argument must be in the form documented in RFC4293 + where the address is specified in hexadecimal using 16-bit values + between colons." + ::= { rlIpv6PathMtuEntry 2 } + +rlIpv6PathMtuEntryMtu OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MTU value that was received in packet-too-bug message for + specific destination." + ::= { rlIpv6PathMtuEntry 3 } + +rlIpv6PathMtuEntryAge OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This entry's age (seconds)" + ::= { rlIpv6PathMtuEntry 4 } + + + +--- Inet IP Static Route Table + + +rlInetStaticRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlInetStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity's static (user configured) Inet Routing table. + Entries are MAX-ACCESSible even if not used for forwarding " + ::= { ipSpec 28 } + + +rlInetStaticRouteEntry OBJECT-TYPE + SYNTAX RlInetStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular Static(user configured) route to a particular destination." + INDEX { + rlInetStaticRouteDestType, + rlInetStaticRouteDest, + rlInetStaticRoutePfxLen, + rlInetStaticRouteNextHopType, + rlInetStaticRouteNextHop, + rlInetStaticRouteIfIndex + } + ::= { rlInetStaticRouteTable 1 } + + +RlInetStaticRouteEntry ::= SEQUENCE { + rlInetStaticRouteDestType InetAddressType, + rlInetStaticRouteDest InetAddress, + rlInetStaticRoutePfxLen InetAddressPrefixLength, + rlInetStaticRouteNextHopType InetAddressType, + rlInetStaticRouteNextHop InetAddress, + rlInetStaticRouteIfIndex InterfaceIndexOrZero, + rlInetStaticRoutePathCost Unsigned32, + rlInetStaticRouteType INTEGER, + rlInetStaticRouteOwner INTEGER, + rlInetStaticRouteRowStatus RowStatus, + rlInetStaticRouteForwardingStatus INTEGER + } + + +rlInetStaticRouteDestType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the address used as the destination + internetwork address or subnet address." + ::= { rlInetStaticRouteEntry 1 } + + +rlInetStaticRouteDest OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Destination internetwork address or subnet address. The + destination prefix length is applied to this value, and to a + particular destination address, to determine whether the route + applies to the particular address. + If the prefix length is L, then applying the length to an address + means taking the first L bits of the address." + ::= { rlInetStaticRouteEntry 2 } + + +rlInetStaticRoutePfxLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the destination address + before being compared to the value in the + rlInetStaticRouteDest field." + ::= { rlInetStaticRouteEntry 3 } + + +rlInetStaticRouteNextHopType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the address used as the next-hop address + for this route." + ::= { rlInetStaticRouteEntry 4 } + + +rlInetStaticRouteNextHop OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The next-hop IP address, if any. + If rlInetStaticRouteAction is 'forward', there may or may not be + a next-hop IP address. + A next-hop IP address is not required if an output interface + index is specified (in other words, if rlInetStaticRouteIfIndex is + non-zero). + If rlInetStaticRouteAction is not 'forward', there is no next-hop + IP address. + If there is no next-hop IP address, the rlInetStaticRouteNextHop + object is set to all zeroes." + ::= { rlInetStaticRouteEntry 5 } + + +rlInetStaticRouteIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached. A value of 0 is valid and represents the + scenario where no interface is specified." + DEFVAL { 0 } + ::= { rlInetStaticRouteEntry 6 } + + +rlInetStaticRoutePathCost OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Path cost for this static route." + DEFVAL { 1 } + ::= { rlInetStaticRouteEntry 7 } + + +rlInetStaticRouteType OBJECT-TYPE + SYNTAX INTEGER { + reject (2), -- route that discards traffic and + -- returns ICMP notification + local (3), -- local interface + remote (4), -- remote destination + blackhole(5), -- route that discards traffic + -- silently + nd (6) -- route that is configred through + -- neighbor discovery (relevant only for icmp owner) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Same as inetCidrRouteType MIB (excluded 'other' route type)" + DEFVAL { remote } + ::= { rlInetStaticRouteEntry 8 } + + +rlInetStaticRouteOwner OBJECT-TYPE + SYNTAX INTEGER { + static (1), + dhcp (2), + default (3), + icmp (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Static - The route is configured over Static IP. + This route is written to configuration files. + Dhcp - The route is Configured by DHCP + (received as part of DHCP configuration) + This route IS NOT written to configuration files + Default - The route is Configured by default system config + exists till any other configuration is applied. + Icmp - The route is Configured by ICMP protocol either by + router advertisements or to be advertised in router + advertisements ." + ::= { rlInetStaticRouteEntry 9 } + + +rlInetStaticRouteRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to row + installation and removal conventions. + A row entry cannot be modified when the status is + marked as active(1)." + ::= { rlInetStaticRouteEntry 10 } + +rlInetStaticRouteForwardingStatus OBJECT-TYPE + SYNTAX INTEGER { + active (1), + inactive (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "active - An indication that the route has implication on routing + inactive - the route is a backup route or it is down. It is not used + in forwarding decision. + Down means that the Ip interface on which it is configured is down. + (Note: ip interface down may be for two reason - its admin status or + the L2 interface , on which the ip interface is configured, status" + ::= { rlInetStaticRouteEntry 11 } + + +--- Clear entries from ipNetToPhysicalTable + +rlIpNetToPhysicalTableClearTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpNetToPhysicalTableClearEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity is used to clear all or specific-type entries from ipNetToPhysicalTable." + ::= { rlIPv6 10 } + +rlIpNetToPhysicalTableClearEntry OBJECT-TYPE + SYNTAX RlIpNetToPhysicalTableClearEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular entry in this table." + INDEX { + rlIpNetToPhysicalTableClearIfIndex + } + ::= { rlIpNetToPhysicalTableClearTable 1 } + +RlIpNetToPhysicalTableClearEntry ::= SEQUENCE { + rlIpNetToPhysicalTableClearIfIndex InterfaceIndexOrZero, + rlIpNetToPhysicalTableClearScope INTEGER + } + +rlIpNetToPhysicalTableClearIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Interface index of to clear or zero in case of whole table." + ::= { rlIpNetToPhysicalTableClearEntry 1 } + + +rlIpNetToPhysicalTableClearScope OBJECT-TYPE + SYNTAX INTEGER { + all(1), + dynamicOnly(2), + staticOnly(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Scope of the action - type of entries to delete." + ::= { rlIpNetToPhysicalTableClearEntry 2 } + + + + +--- Inet IP Distance Table + + +rlInetRoutingDistanceTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlInetRoutingDistanceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines administrative distances for + different protocol routes that are inserted into + the routing table." + ::= { ipSpec 29 } + + +rlInetRoutingDistanceEntry OBJECT-TYPE + SYNTAX RlInetRoutingDistanceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of distances per inet address type." + INDEX { + rlInetRoutingDistanceType + } + ::= { rlInetRoutingDistanceTable 1 } + + +RlInetRoutingDistanceEntry ::= SEQUENCE { + rlInetRoutingDistanceType INTEGER, + rlInetRoutingDistanceConnected INTEGER, + rlInetRoutingDistanceStatic INTEGER, + rlInetRoutingDistanceRip INTEGER, + rlInetRoutingDistanceOspfInternal INTEGER, + rlInetRoutingDistanceOspfExternal INTEGER + } + + +rlInetRoutingDistanceType OBJECT-TYPE + SYNTAX INTEGER { + ipv4(1), + ipv6(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The inet address type for distance definitions set, + either IPv4 or IPv6." + ::= { rlInetRoutingDistanceEntry 1 } + + +rlInetRoutingDistanceConnected OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative distance used for directly connected routes." + ::= { rlInetRoutingDistanceEntry 2 } + + +rlInetRoutingDistanceStatic OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative distance used for static routes." + ::= { rlInetRoutingDistanceEntry 3 } + + +rlInetRoutingDistanceRip OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative distance used for RIP routes." + ::= { rlInetRoutingDistanceEntry 4 } + + +rlInetRoutingDistanceOspfInternal OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative distance used for OSPF internal routes." + ::= { rlInetRoutingDistanceEntry 5 } + + +rlInetRoutingDistanceOspfExternal OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative distance used for OSPF Autonomous System external routes." + ::= { rlInetRoutingDistanceEntry 6 } + + + +--- Internal inetCidrRouteTable (including custom rlInetCidrRouteEntry objects) + + +rlInternInetCidrRouteTable OBJECT-TYPE +SYNTAX SEQUENCE OF RlInternInetCidrRouteEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "Internal inetCidrRouteTable - this entity's IP Routing table." +REFERENCE + "RFC 1213 Section 6.6, The IP Group" + ::= { ipSpec 30 } + +rlInternInetCidrRouteEntry OBJECT-TYPE +SYNTAX RlInternInetCidrRouteEntry +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "A particular route to a particular destination, under a + particular policy (as reflected in the + rlInternInetCidrRoutePolicy object). + + Dynamically created rows will survive an agent reboot. + + Implementers need to be aware that if the total number + of elements (octets or sub-identifiers) in + rlInternInetCidrRouteDest, rlInternInetCidrRoutePolicy, and + rlInternInetCidrRouteNextHop exceeds 111, then OIDs of column + instances in this table will have more than 128 sub- + identifiers and cannot be accessed using SNMPv1, + SNMPv2c, or SNMPv3." +INDEX { + rlInternInetCidrRouteDestType, + rlInternInetCidrRouteDest, + rlInternInetCidrRoutePfxLen, + rlInternInetCidrRoutePolicy, + rlInternInetCidrRouteNextHopType, + rlInternInetCidrRouteNextHop + } +::= { rlInternInetCidrRouteTable 1 } + +RlInternInetCidrRouteEntry ::= SEQUENCE { + rlInternInetCidrRouteDestType InetAddressType, + rlInternInetCidrRouteDest InetAddress, + rlInternInetCidrRoutePfxLen InetAddressPrefixLength, + rlInternInetCidrRoutePolicy OBJECT IDENTIFIER, + rlInternInetCidrRouteNextHopType InetAddressType, + rlInternInetCidrRouteNextHop InetAddress, + rlInternInetCidrRouteIfIndex InterfaceIndexOrZero, + rlInternInetCidrRouteType INTEGER, + rlInternInetCidrRouteProto IANAipRouteProtocol, + rlInternInetCidrRouteAge Gauge32, + rlInternInetCidrRouteNextHopAS InetAutonomousSystemNumber, + rlInternInetCidrRouteMetric1 Integer32, + rlInternInetCidrRouteMetric2 Integer32, + rlInternInetCidrRouteMetric3 Integer32, + rlInternInetCidrRouteMetric4 Integer32, + rlInternInetCidrRouteMetric5 Integer32, + rlInternInetCidrRouteStatus RowStatus, + rlInternInetCidrRouteLifetime Unsigned32, + rlInternInetCidrRouteInfo INTEGER + +} + +rlInternInetCidrRouteDestType OBJECT-TYPE +SYNTAX InetAddressType +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "The type of the rlInternInetCidrRouteDest address, as defined + in the InetAddress MIB. + + Only those address types that may appear in an actual + routing table are allowed as values of this object." +REFERENCE "RFC 4001" +::= { rlInternInetCidrRouteEntry 1 } + +rlInternInetCidrRouteDest OBJECT-TYPE +SYNTAX InetAddress +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "The destination IP address of this route. + + The type of this address is determined by the value of + the rlInternInetCidrRouteDestType object. + + The values for the index objects rlInternInetCidrRouteDest and + rlInternInetCidrRoutePfxLen must be consistent. When the value + of rlInternInetCidrRouteDest (excluding the zone index, if one + is present) is x, then the bitwise logical-AND + of x with the value of the mask formed from the + corresponding index object rlInternInetCidrRoutePfxLen MUST be + equal to x. If not, then the index pair is not + consistent and an inconsistentName error must be + returned on SET or CREATE requests." + +::= { rlInternInetCidrRouteEntry 2 } + +rlInternInetCidrRoutePfxLen OBJECT-TYPE +SYNTAX InetAddressPrefixLength +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the destination address + before being compared to the value in the + rlInternInetCidrRouteDest field. + + The values for the index objects rlInternInetCidrRouteDest and + rlInternInetCidrRoutePfxLen must be consistent. When the value + of rlInternInetCidrRouteDest (excluding the zone index, if one + is present) is x, then the bitwise logical-AND + of x with the value of the mask formed from the + corresponding index object rlInternInetCidrRoutePfxLen MUST be + equal to x. If not, then the index pair is not + consistent and an inconsistentName error must be + returned on SET or CREATE requests." + +::= { rlInternInetCidrRouteEntry 3 } + +rlInternInetCidrRoutePolicy OBJECT-TYPE +SYNTAX OBJECT IDENTIFIER +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "This object is an opaque object without any defined + semantics. Its purpose is to serve as an additional + index that may delineate between multiple entries to + the same destination. The value { 0 0 } shall be used + as the default value for this object." +::= { rlInternInetCidrRouteEntry 4 } + +rlInternInetCidrRouteNextHopType OBJECT-TYPE +SYNTAX InetAddressType +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "The type of the rlInternInetCidrRouteNextHop address, as + defined in the InetAddress MIB. + + Value should be set to unknown(0) for non-remote + routes. + + Only those address types that may appear in an actual + routing table are allowed as values of this object." +REFERENCE "RFC 4001" +::= { rlInternInetCidrRouteEntry 5 } + +rlInternInetCidrRouteNextHop OBJECT-TYPE +SYNTAX InetAddress +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "On remote routes, the address of the next system en + route. For non-remote routes, a zero length string. + + The type of this address is determined by the value of + the rlInternInetCidrRouteNextHopType object." +::= { rlInternInetCidrRouteEntry 6 } + +rlInternInetCidrRouteIfIndex OBJECT-TYPE +SYNTAX InterfaceIndexOrZero +MAX-ACCESS not-accessible +STATUS current +DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached. A value of 0 is valid and represents the + scenario where no interface is specified." +::= { rlInternInetCidrRouteEntry 7 } + +rlInternInetCidrRouteType OBJECT-TYPE +SYNTAX INTEGER { + other (1), -- not specified by this MIB + reject (2), -- route that discards traffic and + -- returns ICMP notification + local (3), -- local interface + remote (4), -- remote destination + blackhole(5) -- route that discards traffic + -- silently + } +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The type of route. Note that local(3) refers to a + route for which the next hop is the final destination; + remote(4) refers to a route for which the next hop is + not the final destination. + + Routes that do not result in traffic forwarding or + rejection should not be displayed, even if the + implementation keeps them stored internally. + + reject(2) refers to a route that, if matched, discards + the message as unreachable and returns a notification + (e.g., ICMP error) to the message sender. This is used + in some protocols as a means of correctly aggregating + routes. + + blackhole(5) refers to a route that, if matched, + discards the message silently." +::= { rlInternInetCidrRouteEntry 8 } + +rlInternInetCidrRouteProto OBJECT-TYPE +SYNTAX IANAipRouteProtocol +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The routing mechanism via which this route was learned. + Inclusion of values for gateway routing protocols is + not intended to imply that hosts should support those + protocols." +::= { rlInternInetCidrRouteEntry 9 } + +rlInternInetCidrRouteAge OBJECT-TYPE +SYNTAX Gauge32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The number of seconds since this route was last updated + or otherwise determined to be correct. Note that no + semantics of 'too old' can be implied, except through + knowledge of the routing protocol by which the route + was learned." +::= { rlInternInetCidrRouteEntry 10 } + +rlInternInetCidrRouteNextHopAS OBJECT-TYPE +SYNTAX InetAutonomousSystemNumber +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The Autonomous System Number of the Next Hop. The + semantics of this object are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. When this object is unknown or not relevant, its + value should be set to zero." +DEFVAL { 0 } +::= { rlInternInetCidrRouteEntry 11 } + +rlInternInetCidrRouteMetric1 OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The primary routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." +DEFVAL { -1 } +::= { rlInternInetCidrRouteEntry 12 } + +rlInternInetCidrRouteMetric2 OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." +DEFVAL { -1 } +::= { rlInternInetCidrRouteEntry 13 } + +rlInternInetCidrRouteMetric3 OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." +DEFVAL { -1 } +::= { rlInternInetCidrRouteEntry 14 } + +rlInternInetCidrRouteMetric4 OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." +DEFVAL { -1 } +::= { rlInternInetCidrRouteEntry 15 } + +rlInternInetCidrRouteMetric5 OBJECT-TYPE +SYNTAX Integer32 +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's rlInternInetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." +DEFVAL { -1 } +::= { rlInternInetCidrRouteEntry 16 } + +rlInternInetCidrRouteStatus OBJECT-TYPE +SYNTAX RowStatus +MAX-ACCESS read-only +STATUS current +DESCRIPTION + "The row status variable, used according to row + installation and removal conventions. + + A row entry cannot be modified when the status is + marked as active(1)." +::= { rlInternInetCidrRouteEntry 17 } + + +rlInternInetCidrRouteLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remaining length of time, in seconds, that this route + will continue to be valid, i.e., time until deprecation. + A value of 4,294,967,295 represents infinity." + DEFVAL { 4294967295 } + ::= { rlInternInetCidrRouteEntry 18 } + +rlInternInetCidrRouteInfo OBJECT-TYPE + SYNTAX INTEGER { + none(0), + ospfIntraArea(1), + ospfInterArea(2), + ospfExternalType1(3), + ospfExternalType2(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A reference to MIB definitions specific to the particular routing + protocol which is responsible for this route, as determined by the + value specified in the route's inetCidrRouteProto value." + DEFVAL { none } + ::= { rlInternInetCidrRouteEntry 19 } + + + +--- Internal Inet IP Static Route Table + + +rlInternInetStaticRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlInternInetStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity's static (user configured) Inet Routing table. + Entries are MAX-ACCESSible even if not used for forwarding " + ::= { ipSpec 31 } + + +rlInternInetStaticRouteEntry OBJECT-TYPE + SYNTAX RlInternInetStaticRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular Static(user configured) route to a particular destination." + INDEX { + rlInternInetStaticRouteDestType, + rlInternInetStaticRouteDest, + rlInternInetStaticRoutePfxLen, + rlInternInetStaticRouteNextHopType, + rlInternInetStaticRouteNextHop, + rlInternInetStaticRouteIfIndex + } + ::= { rlInternInetStaticRouteTable 1 } + + +RlInternInetStaticRouteEntry ::= SEQUENCE { + rlInternInetStaticRouteDestType InetAddressType, + rlInternInetStaticRouteDest InetAddress, + rlInternInetStaticRoutePfxLen InetAddressPrefixLength, + rlInternInetStaticRouteNextHopType InetAddressType, + rlInternInetStaticRouteNextHop InetAddress, + rlInternInetStaticRouteIfIndex InterfaceIndexOrZero, + rlInternInetStaticRoutePathCost Unsigned32, + rlInternInetStaticRouteType INTEGER, + rlInternInetStaticRouteOwner INTEGER, + rlInternInetStaticRouteRowStatus RowStatus, + rlInternInetStaticRouteForwardingStatus INTEGER + } + + +rlInternInetStaticRouteDestType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the address used as the destination + internetwork address or subnet address." + ::= { rlInternInetStaticRouteEntry 1 } + + +rlInternInetStaticRouteDest OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Destination internetwork address or subnet address. The + destination prefix length is applied to this value, and to a + particular destination address, to determine whether the route + applies to the particular address. + If the prefix length is L, then applying the length to an address + means taking the first L bits of the address." + ::= { rlInternInetStaticRouteEntry 2 } + + +rlInternInetStaticRoutePfxLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the destination address + before being compared to the value in the + rlInternInetStaticRouteDest field." + ::= { rlInternInetStaticRouteEntry 3 } + + +rlInternInetStaticRouteNextHopType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the address used as the next-hop address + for this route." + ::= { rlInternInetStaticRouteEntry 4 } + + +rlInternInetStaticRouteNextHop OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The next-hop IP address, if any. + If rlInternInetStaticRouteAction is 'forward', there may or may not be + a next-hop IP address. + A next-hop IP address is not required if an output interface + index is specified (in other words, if rlInternInetStaticRouteIfIndex is + non-zero). + If rlInternInetStaticRouteAction is not 'forward', there is no next-hop + IP address. + If there is no next-hop IP address, the rlInternInetStaticRouteNextHop + object is set to all zeroes." + ::= { rlInternInetStaticRouteEntry 5 } + + +rlInternInetStaticRouteIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached. A value of 0 is valid and represents the + scenario where no interface is specified." + DEFVAL { 0 } + ::= { rlInternInetStaticRouteEntry 6 } + + +rlInternInetStaticRoutePathCost OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Path cost for this static route. Value of 0 signs default value metric" + ::= { rlInternInetStaticRouteEntry 7 } + + +rlInternInetStaticRouteType OBJECT-TYPE + SYNTAX INTEGER { + reject (2), -- route that discards traffic and + -- returns ICMP notification + local (3), -- local interface + remote (4), -- remote destination + blackhole(5), -- route that discards traffic + -- silently + nd (6) -- route that is configred through + -- neighbor discovery (relevant only for icmp owner) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Same as inetCidrRouteType MIB (excluded 'other' route type)" + DEFVAL { remote } + ::= { rlInternInetStaticRouteEntry 8 } + + +rlInternInetStaticRouteOwner OBJECT-TYPE + SYNTAX INTEGER { + static (1), + dhcp (2), + default (3), + icmp (4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Static - The route is configured over Static IP. + This route is written to configuration files. + Dhcp - The route is Configured by DHCP + (received as part of DHCP configuration) + This route IS NOT written to configuration files + Default - The route is Configured by default system config + exists till any other configuration is applied. + Icmp - The route is Configured by ICMP protocol either by + router advertisements or to be advertised in router + advertisements ." + ::= { rlInternInetStaticRouteEntry 9 } + + +rlInternInetStaticRouteRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The row status variable, used according to row + installation and removal conventions. + A row entry cannot be modified when the status is + marked as active(1)." + ::= { rlInternInetStaticRouteEntry 10 } + +rlInternInetStaticRouteForwardingStatus OBJECT-TYPE + SYNTAX INTEGER { + active (1), + inactive (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "active - An indication that the route has implication on routing + inactive - the route is a backup route or it is down. It is not used + in forwarding decision. + Down means that the Ip interface on which it is configured is down." + ::= { rlInternInetStaticRouteEntry 11 } + +--- IPv6 Host Forwarding Table + + +rlIpv6HostForwardingTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6HostForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity's IPv6 host forwarding table." + ::= { rlIPv6 11 } + + +rlIpv6HostForwardingEntry OBJECT-TYPE + SYNTAX RlIpv6HostForwardingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular Static(user configured) route to a particular destination." + INDEX { + rlIpv6HostForwardingDestType, + rlIpv6HostForwardingDest, + rlIpv6HostForwardingPfxLen, + rlIpv6HostForwardingNextHopType, + rlIpv6HostForwardingNextHop, + rlIpv6HostForwardingIfIndex, + rlIpv6HostForwardingType + } + ::= { rlIpv6HostForwardingTable 1 } + + +RlIpv6HostForwardingEntry ::= SEQUENCE { + rlIpv6HostForwardingDestType InetAddressType, + rlIpv6HostForwardingDest InetAddress, + rlIpv6HostForwardingPfxLen InetAddressPrefixLength, + rlIpv6HostForwardingNextHopType InetAddressType, + rlIpv6HostForwardingNextHop InetAddress, + rlIpv6HostForwardingIfIndex InterfaceIndexOrZero, + rlIpv6HostForwardingType INTEGER, + rlIpv6HostForwardingPathCost Unsigned32 + } + +rlIpv6HostForwardingDestType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the address used as the destination + internetwork address or subnet address." + ::= { rlIpv6HostForwardingEntry 1 } + + +rlIpv6HostForwardingDest OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Destination internetwork address or subnet address." + ::= { rlIpv6HostForwardingEntry 2 } + + +rlIpv6HostForwardingPfxLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the destination address + before being compared to the value in the + rlIpv6HostForwardingDest field." + ::= { rlIpv6HostForwardingEntry 3 } + + +rlIpv6HostForwardingNextHopType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the address used as the next-hop address + for this route." + ::= { rlIpv6HostForwardingEntry 4 } + + +rlIpv6HostForwardingNextHop OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The next-hop IP address, if any. + A next-hop IP address is not required if an output interface + index is specified (in other words, if rlIpv6HostForwardingIfIndex is + non-zero). + If there is no next-hop IP address, the rlIpv6HostForwardingNextHop + object is set to all zeroes." + ::= { rlIpv6HostForwardingEntry 5 } + + +rlIpv6HostForwardingIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached. A value of 0 is valid and represents the + scenario where no interface is specified." + DEFVAL { 0 } + ::= { rlIpv6HostForwardingEntry 6 } + + +rlIpv6HostForwardingType OBJECT-TYPE + SYNTAX INTEGER { + redirect (1), -- ICMP redirect + local (2), -- local interface (subnet) + nd (3), -- route that is configred through router advertisment (on-link prefix) + remote-static (4), -- default static route + remote-dynamic (5) -- default dynamic route + } + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Forwarding type" + ::= { rlIpv6HostForwardingEntry 7 } + +rlIpv6HostForwardingPathCost OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Path cost for this route." + ::= { rlIpv6HostForwardingEntry 8 } + + + +rlipv6EnabledByDefaultRemovedIfindex OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION "the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. + If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user + on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is + that Ipv6 interface must be added. " + DEFVAL{ 0 } + ::= { rlIPv6 12 } + +--- rlManagementIPv6 + +rlManagementIpv6 OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management IPv6 address which is kept between system mode changes" + ::= { rlIPv6 13 } + +rlManagementIpv6Action OBJECT-TYPE + SYNTAX INTEGER { + clear (1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system management IPv6 action: + clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6" + + ::= { rlIPv6 14 } + + +--- IPv6 Tunnel if/addr/prefix Table (internal mib) + +rlIpv6TunnelToIPv6DbTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlIpv6TunnelToIPv6DbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entity's IPv6 Tunnel if/addr/prefix table." + ::= { rlIPv6 15 } + + +rlIpv6TunnelToIPv6DbEntry OBJECT-TYPE + SYNTAX RlIpv6TunnelToIPv6DbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular tunnel configured data to IPv6 db." + INDEX { + rlIpv6TunnelToIPv6IfIndex + } + ::= { rlIpv6TunnelToIPv6DbTable 1 } + + +RlIpv6TunnelToIPv6DbEntry ::= SEQUENCE { + rlIpv6TunnelToIPv6IfIndex InterfaceIndex, + rlIpv6TunnelToIPv6Action INTEGER, + rlIpv6TunnelToIPv6TunnelType IANAtunnelType, + rlIpv6TunnelToIPv6Address InetAddress, + rlIpv6TunnelToIPv6PrefixLength Unsigned32, + rlIpv6TunnelToIPv6Mtu Unsigned32, + rlIpv6TunnelToIPv6MinRtrSolicitationInterval Unsigned32, + rlIpv6TunnelToIPv6LinkLayerIPv4 IpAddress + } + +rlIpv6TunnelToIPv6IfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IfIndex of tunnel interface" + ::= { rlIpv6TunnelToIPv6DbEntry 1 } + + +rlIpv6TunnelToIPv6Action OBJECT-TYPE + SYNTAX INTEGER { + createTunnel (1), -- create Tunnel interface + destroyTunnel (2), -- destroy Tunnel interface + addAddress (3), -- add IPv6 Address + deleteAddress (4), -- delete IPv6 Address + updateAddresses (5), -- refresh IPv6 Address on tunnel interface (if link-layer address was changed) + six2fourCfgRestore(6), -- restore lost 6to4 configuration + six2fourCfgClear (7) -- clear stale 6to4 configuration + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action of the entry. All other fields relevant for appropriate actions." + ::= { rlIpv6TunnelToIPv6DbEntry 2 } + + +rlIpv6TunnelToIPv6TunnelType OBJECT-TYPE + SYNTAX IANAtunnelType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Tunnel type (manual/isatap/6to4/...)." + ::= { rlIpv6TunnelToIPv6DbEntry 3 } + +rlIpv6TunnelToIPv6Address OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The address used for this tunnel. Could be local IPv4 of the tunnel." + ::= { rlIpv6TunnelToIPv6DbEntry 4 } + +rlIpv6TunnelToIPv6PrefixLength OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The address/prefix length used for above address if applicable." + ::= { rlIpv6TunnelToIPv6DbEntry 5 } + +rlIpv6TunnelToIPv6Mtu OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Mtu of this interface. Used for host isatap tunnels" + ::= { rlIpv6TunnelToIPv6DbEntry 6 } + +rlIpv6TunnelToIPv6MinRtrSolicitationInterval OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Minimal router solicitation interval. Used for host isatap tunnels" + ::= { rlIpv6TunnelToIPv6DbEntry 7 } + +rlIpv6TunnelToIPv6LinkLayerIPv4 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IPv4 address used for link-layer of ipv6 over ipv4 tunnel" + ::= { rlIpv6TunnelToIPv6DbEntry 8 } + +rlIpv6DefaultTC OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default value inserted into the TC + field of the IPv6 header of datagrams originated at + this entity, whenever a TC value is not supplied + by the application." + ::= { rlIPv6 16 } + +rlIpv6DefaultUP OBJECT-TYPE + SYNTAX INTEGER(0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default value inserted into the User Priority + field in the 802.1q VLAN tag of IPv4 frames sent by the + CPU." + ::= { rlIPv6 17 } + +rlIpv6MtuSize OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload)." + ::= { rlIPv6 18 } + +END -- cgit v1.2.3