From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/transition/TN-ERPS-MIB | 859 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 859 insertions(+) create mode 100644 MIBS/transition/TN-ERPS-MIB (limited to 'MIBS/transition/TN-ERPS-MIB') diff --git a/MIBS/transition/TN-ERPS-MIB b/MIBS/transition/TN-ERPS-MIB new file mode 100644 index 0000000..b0e1db9 --- /dev/null +++ b/MIBS/transition/TN-ERPS-MIB @@ -0,0 +1,859 @@ +-- ***************************************************************** +-- TN-ERPS-MIB.my : TN Ethernet Ring Protection Switch MIB +-- +-- Author : Tony Lei +-- update by Angela Xing +-- Copyright (c) 2009 by Transition Networks, Inc. +-- All rights reserved. +-- +-- ************************************************************************************************* +-- + +TN-ERPS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + NOTIFICATION-TYPE, + OBJECT-TYPE, + Unsigned32, + Gauge32 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, + OBJECT-GROUP, + NOTIFICATION-GROUP + FROM SNMPv2-CONF + RowStatus,TruthValue, + MacAddress, + DisplayString + FROM SNMPv2-TC -- [RFC2579] + VlanId + FROM Q-BRIDGE-MIB + InterfaceIndex + FROM IF-MIB + Dot1agCfmMepId + FROM IEEE8021-CFM-MIB + tnProducts + FROM TRANSITION-SMI + tnProtectionMIB + FROM TN-PROTECTION-MIB; +-- +-- main body +-- + +tnERPSMIB OBJECT IDENTIFIER ::= { tnProtectionMIB 3 } + +tnERPSMIBNotifications OBJECT IDENTIFIER ::= { tnERPSMIB 1 } +tnERPSMgmtObjects OBJECT IDENTIFIER ::= { tnERPSMIB 2 } +tnERPSMIBConformance OBJECT IDENTIFIER ::= { tnERPSMIB 3 } + +-- Textual Conventions + +-- ****************************************************************** +-- NOTIFICATIONS (TRAPS) +-- These notifications will be sent to the management entity +-- whenever a ERPS Node loses/restores contact with the adjacent ring nodes. +-- ****************************************************************** +tnErpsAlarmDown NOTIFICATION-TYPE + OBJECTS { + tnERPSState, + tnERPSStatePort0, + tnERPSStatePort1, + tnERPSStateRPLUnBlocked, + tnERPSStateNoApsReceived, + tnERPSStatePort0Blockstatus, + tnERPSStatePort1Blockstatus + } + STATUS current + DESCRIPTION + "A ERPS has a persistent defect condition. A notification + (fault alarm) is sent to the management entity with the OID + of the ERPS that has detected the fault. + + The management entity receiving the notification can identify + the system from the network source address of the + notification, and can identify the ERPS reporting the defect + by the indices in the OID of the variables in the notification: + + tnErpsInstance - Also the index of the ERPS state table entry + (tnERPSStateTable). + " + ::= { tnERPSMIBNotifications 2 } + +tnErpsAlarmUp NOTIFICATION-TYPE + OBJECTS { + tnERPSState, + tnERPSStatePort0, + tnERPSStatePort1, + tnERPSStateRPLUnBlocked, + tnERPSStateNoApsReceived, + tnERPSStatePort0Blockstatus, + tnERPSStatePort1Blockstatus + } + STATUS current + DESCRIPTION + "A ERPS has cleared a defect condition. A notification + (fault clearance alarm) is sent to the management entity with the OID + of the ERPS that has cleared the fault. + + The management entity receiving the notification can identify + the system from the network source address of the + notification, and can identify the ERPS reporting the alarm + by the indices in the OID of the variables in the notification: + + tnErpsInstance - Also the index of the ERPS state table entry + (tnERPSStateTable). + " + ::= { tnERPSMIBNotifications 1 } + + +-- ****************************************************************** +-- EPRS table +tnERPSTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table displays and sets current Ethernet Protection Switching configurations. + " + ::= { tnERPSMgmtObjects 1 } + +tnERPSEntry OBJECT-TYPE + SYNTAX TnERPSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an Ethernet Ring Protection Switching configuration." + INDEX { tnERPSinstance } + ::= { tnERPSTable 1 } + +TnERPSEntry ::= SEQUENCE { + tnERPSinstance Unsigned32, + tnERPSPort0 INTEGER, + tnERPSPort1 INTEGER, + tnERPSPort0ApsMep INTEGER, + tnERPSPort1ApsMep INTEGER, + tnERPSPort0SfMep INTEGER, + tnERPSPort1SfMep INTEGER, + tnERPSRingType INTEGER, + tnERPSInterconnectednode TruthValue, + tnERPSVirtualChannel TruthValue, + tnERPSMajorRingID INTEGER, + tnERPSAlarm INTEGER, + tnERPSRowStatus RowStatus +} + +tnERPSinstance OBJECT-TYPE + SYNTAX Unsigned32(1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The ID of the ERPS. + " + ::= { tnERPSEntry 1 } + +tnERPSPort0 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This will create a Port 0 of the switch in the ring. + " + ::= { tnERPSEntry 2 } + +tnERPSPort1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This will create 'Port 1' of the switch in the Ring. + As interconnected sub-ring will have only one ring port, + 'Port 1' is configured as '0' for interconnected sub-ring. + '0' in this field indicates that no 'Port 1' is associated with this instance + " + ::= { tnERPSEntry 3 } + +tnERPSPort0ApsMep OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Port 0 APS PDU handling MEP. + " + ::= { tnERPSEntry 4 } + +tnERPSPort1ApsMep OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Port 1 APS PDU handling MEP. As only one APS MEP is associated with interconnected + sub-ring without virtual channel, it is configured as '0' for such ring instances. + '0' in this field indicates that no Port 1 APS MEP is associated with this instance. + " + ::= { tnERPSEntry 5 } + +tnERPSPort0SfMep OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Port 0 Signal Fail reporting MEP. + " + ::= { tnERPSEntry 6 } + +tnERPSPort1SfMep OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Port 1 Signal Fail reporting MEP. + " + ::= { tnERPSEntry 7 } + +tnERPSRingType OBJECT-TYPE + SYNTAX INTEGER{ + major (1), + sub (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Type of Protecting ring. It can be either major ring or sub-ring. As per G.8032v2, + they are defined as : + Major Ring: A Major ring is the Ethernet ring that is connected on two ports to + an interconnection node. + Sub Ring :A sub-ring is an Ethernet ring which is connected to (an)other Ethernet + ring(s) or network(s) through the use of a pair of interconnection nodes. + On their own, the sub-ring links do not form a closed loop. + A closed connection of traffic may be formed by the sub-ring links and + one or more links, that are controlled by (an)other Ethernet ring(s) or network(s), + between interconnection nodes + " + ::= { tnERPSEntry 8 } + +tnERPSInterconnectednode OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Interconnected Node indicates that the ring instance is interconnected. + Click on the checkbox to configure this. + 'True' indicates it is an interconnected node for this instance. + 'False' indicates that the configured instance is not interconnected. + " + ::= { tnERPSEntry 9 } + +tnERPSVirtualChannel OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Sub-rings can either have virtual channel or not on the interconnected node. + 'True' indicates it is a sub-ring with virtual channel. + 'False' indicates, sub-ring doesn't have virtual channel. + " + ::= { tnERPSEntry 10 } + +tnERPSMajorRingID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Major ring group ID for the interconnected sub-ring. + It is used to send topology change updates on major ring. + If ring is major, this value is same as the protection group ID of this ring. + " + ::= { tnERPSEntry 11 } + +tnERPSAlarm OBJECT-TYPE + SYNTAX INTEGER{ + active (1), + notActive (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "There is an active alarm on the ERPS. + " + ::= { tnERPSEntry 12 } + +tnERPSRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The rowstatus of the Ethernet Ring Protection Switch. + " + ::= { tnERPSEntry 13 } +-- ****************************************************************** +-- TN ERPS Cfg Table +-- ****************************************************************** +tnERPSConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of Instance Configuration." + ::= { tnERPSMgmtObjects 2 } + +tnERPSConfigEntry OBJECT-TYPE + SYNTAX TnERPSConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an ERPS. + " + INDEX { tnERPSinstance } + ::= { tnERPSConfigTable 1 } + +TnERPSConfigEntry ::= SEQUENCE { + tnERPSConfigStatus INTEGER, + tnERPSConfigGuardTime INTEGER, + tnERPSConfigWtrTime INTEGER, + tnERPSConfigHoldOffTime INTEGER, + tnERPSConfigVersion INTEGER, + tnERPSConfigRevertive TruthValue +} + +tnERPSConfigStatus OBJECT-TYPE + SYNTAX INTEGER{ + down (0), + up (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Red: This ERPS is only created and has not yet been configured - is not active. + Green: This ERPS is configured - is activeĦ£ + " + ::= { tnERPSConfigEntry 1 } + +tnERPSConfigGuardTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages. + The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, + with a default value of 500 ms + " + ::= { tnERPSConfigEntry 2 } + +tnERPSConfigWtrTime OBJECT-TYPE + SYNTAX INTEGER{ + t1min (1), + t2min (2), + t3min (3), + t4min (4), + t5min (5), + t6min (6), + t7min (7), + t8min (8), + t9min (9), + t10min (10), + t11min (11), + t12min (12) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Wait To Restore timing value to be used in revertive switching. + The period of the WTR time can be configured by the operator + in 1 minute steps between 1 and 12 minutes with a default value of 5 minutes. + " + ::= { tnERPSConfigEntry 3 } + +tnERPSConfigHoldOffTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The timing value to be used to make persistent check on Signal Fail before switching. + The range of the hold off timer is 0 to 10 seconds in steps of 100 ms + " + ::= { tnERPSConfigEntry 4 } + +tnERPSConfigVersion OBJECT-TYPE + SYNTAX INTEGER{ + v1 (1), + v2 (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select v1 or v2 as the ERPS version to be used. For fields such as Version, OpCode, Flags, and End TLV, the values used are as defined in ITU-T Y.1731 (Version 0x01 is transmitted per + the current version of this Recommendation at the time of this publication.) + G.8032v1 supported a single ring topology and G.8032v2 supports multiple rings/ladder topology. + v1: G.8032 v1 supports a single ring topology. The v1 protocol is robust enough to work for unidirectional failure and + multiple link failure scenarios in a ring topology. + It allows mechanism to force switch (FS) or manual switch (MS) to take care of field maintenance scenario. + v2: G.8032 v2 supports multiple rings/ladder topology. + The v2 protocol also introduced other features such as Revertive/ Non-revertive mode after condition, + that is causing the switch, is cleared, Administrative commands - Forced Switch (FS), + Manual Switch (MS) for blocking a particular ring port, Flush FDB (Filtering database), + and support of multiple ERP instances on a single ring. + " + ::= { tnERPSConfigEntry 5 } + +tnERPSConfigRevertive OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "In Revertive mode, after the conditions causing a protection switch has cleared, + the traffic channel is restored to the working transport entity, i.e., blocked on the RPL. + In Non-Revertive mode, the traffic channel continues to use the RPL, + if it is not failed, after a protection switch condition has cleared. + " + ::= { tnERPSConfigEntry 6 } + +-- erps vlan Configuration tables +tnERPSVlanTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of vlan Configuration." + ::= { tnERPSMgmtObjects 6 } + +tnERPSVlanEntry OBJECT-TYPE + SYNTAX TnERPSVlanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an vlan. + " + INDEX { tnERPSinstance,tnERPSVlanInstance } + ::= { tnERPSVlanTable 1 } + +TnERPSVlanEntry ::= SEQUENCE { + tnERPSVlanInstance Unsigned32, + tnERPSVlanId VlanId, + tnERPSVlanRowStatus RowStatus +} + +tnERPSVlanInstance OBJECT-TYPE + SYNTAX Unsigned32(1..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The instance of the ERPS vlan. + " + ::= { tnERPSVlanEntry 1 } + +tnERPSVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS read-write + STATUS current + DESCRIPTION "vlan id. + " + ::= { tnERPSVlanEntry 2 } + +tnERPSVlanRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION "row status. + " + ::= { tnERPSVlanEntry 3 } + +-- RPL Configuration tables + +tnERPSRPLTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSRPLEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of RPL Configuration." + ::= { tnERPSMgmtObjects 3 } + +tnERPSRPLEntry OBJECT-TYPE + SYNTAX TnERPSRPLEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an RPL. + " + INDEX { tnERPSinstance } + ::= { tnERPSRPLTable 1 } + +TnERPSRPLEntry ::= SEQUENCE { + tnERPSRPLRole INTEGER, + tnERPSRPLPort INTEGER, + tnERPSRPLClear TruthValue +} + +tnERPSRPLRole OBJECT-TYPE + SYNTAX INTEGER{ + none (1), + owner (2), + neighbour (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "It can be either RPL owner or RPL Neighbour. + " + ::= { tnERPSRPLEntry 1 } + +tnERPSRPLPort OBJECT-TYPE + SYNTAX INTEGER{ + none (1), + port0 (2), + port1 (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This allows to select the east port or west port as the RPL block. + " + ::= { tnERPSRPLEntry 2 } + +tnERPSRPLClear OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "If the owner has to be changed, + then the clear check box allows to clear the RPL owner for that ERPS ring. + " + ::= { tnERPSRPLEntry 3 } + +-- Command Configuration tables + +tnERPSCommandTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSCommandEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of Command Configuration." + ::= { tnERPSMgmtObjects 4 } + +tnERPSCommandEntry OBJECT-TYPE + SYNTAX TnERPSCommandEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an Command. + " + INDEX { tnERPSinstance } + ::= { tnERPSCommandTable 1 } + +TnERPSCommandEntry ::= SEQUENCE { + tnERPSCommand INTEGER, + tnERPSCommandPort INTEGER +} + +tnERPSCommand OBJECT-TYPE + SYNTAX INTEGER{ + none (1), + manual (2), + forced (3), + clear (4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Administrative command. + A port can be administratively configured to be in either manual switch or + forced switch state. + " + ::= { tnERPSCommandEntry 1 } + +tnERPSCommandPort OBJECT-TYPE + SYNTAX INTEGER{ + none (1), + port0 (2), + port1 (3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Port selection - Port0 or Port1 of the protection Group on which the command is applied. + " + ::= { tnERPSCommandEntry 2 } + +-- Instance State tables + +tnERPSStateTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of EVC control entry." + ::= { tnERPSMgmtObjects 5 } + +tnERPSStateEntry OBJECT-TYPE + SYNTAX TnERPSStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an instance State. + " + INDEX { tnERPSinstance } + ::= { tnERPSStateTable 1 } + +TnERPSStateEntry ::= SEQUENCE { + tnERPSState INTEGER, + tnERPSStatePort0 INTEGER, + tnERPSStatePort1 INTEGER, + tnERPSStateTxAps DisplayString, + tnERPSStatePort0RxAps DisplayString, + tnERPSStatePort1RxAps DisplayString, + tnERPSStateWtrRemaining INTEGER, + tnERPSStateRPLUnBlocked INTEGER, + tnERPSStateNoApsReceived TruthValue, + tnERPSStatePort0Blockstatus INTEGER, + tnERPSStatePort1Blockstatus INTEGER, + tnERPSStateFopAlarm TruthValue +} + +tnERPSState OBJECT-TYPE + SYNTAX INTEGER{ + idle (1), + protected (2), + manual (3), + forced (4), + pending (5), + unknown (6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ERPS state according to State Transition Tables in G.8032. + " + ::= { tnERPSStateEntry 1 } + +tnERPSStatePort0 OBJECT-TYPE + SYNTAX INTEGER{ + ok (1), + sf (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION " + OK: State of East port is ok. + SF: State of East port is Signal Fail. + " + ::= { tnERPSStateEntry 2 } + +tnERPSStatePort1 OBJECT-TYPE + SYNTAX INTEGER{ + ok (1), + sf (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "OK: State of East port is ok. + SF: State of East port is Signal Fail. + " + ::= { tnERPSStateEntry 3 } + +tnERPSStateTxAps OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmitted APS according to State Transition Tables in G.8032." + ::= { tnERPSStateEntry 4 } + +tnERPSStatePort0RxAps OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The received APS on Port 0 according to State Transition Tables in G.8032." + ::= { tnERPSStateEntry 5 } + +tnERPSStatePort1RxAps OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The received APS on Port 1 according to State Transition Tables in G.8032." + ::= { tnERPSStateEntry 6 } + +tnERPSStateWtrRemaining OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Remaining WTR timeout in milliseconds" + ::= { tnERPSStateEntry 7 } + +tnERPSStateRPLUnBlocked OBJECT-TYPE + SYNTAX INTEGER{ + block (0), + unblock (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "APS is received on the working flow." + ::= { tnERPSStateEntry 8 } + +tnERPSStateNoApsReceived OBJECT-TYPE + SYNTAX INTEGER{ + noapsReceived (0), + apsReceived (1) + } + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RAPS PDU is not received from the other end." + ::= { tnERPSStateEntry 9 } + +tnERPSStatePort0Blockstatus OBJECT-TYPE + SYNTAX INTEGER{ + block (0), + unblock (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Block status for Port 0 (Both traffic and R-APS block status). + R-APS channel is never blocked on sub-rings without virtual channel." + ::= { tnERPSStateEntry 10 } + +tnERPSStatePort1Blockstatus OBJECT-TYPE + SYNTAX INTEGER{ + block (0), + unblock (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Block status for Port 1 (Both traffic and R-APS block status). + R-APS channel is never blocked on sub-rings without virtual channel" + ::= { tnERPSStateEntry 11 } + +tnERPSStateFopAlarm OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Failure of Protocol Defect(FOP) status. + If FOP is detected, the red LED lights; otherwise the green LED lights. " + ::= { tnERPSStateEntry 12 } + +-- Sub-Ring Configuration tables +tnERPSSubRingCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSSubRingCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the configuration of Command Configuration." + ::= { tnERPSMgmtObjects 7 } + +tnERPSSubRingCfgEntry OBJECT-TYPE + SYNTAX TnERPSSubRingCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an sub ring configuration. + " + INDEX { tnERPSinstance } + ::= { tnERPSSubRingCfgTable 1 } + +TnERPSSubRingCfgEntry ::= SEQUENCE { + tnERPSSubRingType DisplayString, + tnERPSSubRingTopologyChange TruthValue +} + +tnERPSSubRingType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps ring type. + " + ::= { tnERPSSubRingCfgEntry 1 } + +tnERPSSubRingTopologyChange OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Clicking this checkbox indicates that the topology changes in the sub-ring are propagated in the major ring. + " + ::= { tnERPSSubRingCfgEntry 2 } + +-- erps statistics tables +tnERPSStatisticsTable OBJECT-TYPE + SYNTAX SEQUENCE OF TnERPSStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the display of erps statistics." + ::= { tnERPSMgmtObjects 8 } + +tnERPSStatisticsEntry OBJECT-TYPE + SYNTAX TnERPSStatisticsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This entry represents an sub ring configuration. + " + INDEX { tnERPSinstance } + ::= { tnERPSStatisticsTable 1 } + +TnERPSStatisticsEntry ::= SEQUENCE { + tnERPSRAPSPDUReceived INTEGER, + tnERPSRAPSPDUDropped INTEGER, + tnERPSLocalSFOccurred INTEGER, + tnERPSLocalSFCleared INTEGER, + tnERPSRemoteSFReceived INTEGER, + tnERPSRemoteFSReceived INTEGER, + tnERPSNRMessageSent INTEGER +} + +tnERPSRAPSPDUReceived OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps R-APS PDU received. + " + ::= { tnERPSStatisticsEntry 1 } + +tnERPSRAPSPDUDropped OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps R-APS PDU dropped. + " + ::= { tnERPSStatisticsEntry 2 } + +tnERPSLocalSFOccurred OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps local SF occurred. + " + ::= { tnERPSStatisticsEntry 3 } + +tnERPSLocalSFCleared OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps local SF cleared. + " + ::= { tnERPSStatisticsEntry 4 } + +tnERPSRemoteSFReceived OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps remote SF received. + " + ::= { tnERPSStatisticsEntry 5 } + +tnERPSRemoteFSReceived OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps remote FS received. + " + ::= { tnERPSStatisticsEntry 6 } + +tnERPSNRMessageSent OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION "erps NR message sent. + " + ::= { tnERPSStatisticsEntry 7 } +END -- cgit v1.2.3