From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/trellix/TRELLIX-INTRUVERT-TC | 406 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 406 insertions(+) create mode 100644 MIBS/trellix/TRELLIX-INTRUVERT-TC (limited to 'MIBS/trellix/TRELLIX-INTRUVERT-TC') diff --git a/MIBS/trellix/TRELLIX-INTRUVERT-TC b/MIBS/trellix/TRELLIX-INTRUVERT-TC new file mode 100644 index 0000000..3cf650f --- /dev/null +++ b/MIBS/trellix/TRELLIX-INTRUVERT-TC @@ -0,0 +1,406 @@ +-- ***************************************************************** +-- TRELLIX CONFIDENTIAL +-- TRELLIX-INTRUVERT-TC: +-- Trellix (Textual Conventions) +-- +-- Copyright (c) 2022 MUSARUBRA US, LLC +-- All rights reserved. +-- +-- ***************************************************************** + +TRELLIX-INTRUVERT-TC DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, Integer32 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC + ivConventions + FROM TRELLIX-INTRUVERT-SMI; + +ivTextualConventions MODULE-IDENTITY +LAST-UPDATED "200707090000Z" +ORGANIZATION +"MUSARUBRA US LLC" +CONTACT-INFO +"Trellix Customer Service Department + +Postal: 6220 American Center Drive + San Jose CA 95002-2563 + + +Tel: +1 800 338 8754 + +E-mail: support@mcafee.com" +DESCRIPTION +"This module defines textual conventions used throughout the +Trellix enterprise MIBs." +::= { ivConventions 1 } + + +TrellixEventCategory ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + other (0), + equipment (1), + commnunication (2), + qos (3), + environment (4), + application (5) + } + + +TrellixEventSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + unknown (0), + inform (1), + clear (2), + warning (3), + error (4), + critical (5) + } + + +TrellixFEType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specify speed for Fast Ethernet ports. + example: 10 or 100 Mbps" + SYNTAX INTEGER { + other (0), + ten-Mbps (1), + hundred-Mbps (2), + auto-negotiate (3) + } + + +TrellixGEType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specify speed for Gigabit Ethernet ports." + SYNTAX INTEGER { + other (0), + one-gbps (2), + auto-negotiate (3) + } + + +TrellixIDSAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "These specify IDS-specific actions on the management and sensor/analysis card. + " + SYNTAX INTEGER { + other (0), + enable (1), + disable (2), + reset (3), + sigupdate (4), + swupdate (5), + sensordown (6), + certupdate (7), + hitlessreboot (8) + } + + +TrellixIDSActionResult ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Bitmap-encoded integer that indicates detailed results of an action" + SYNTAX Integer32 (0..255) + + +TrellixIDSActionStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Status reflecting action outcome." + SYNTAX INTEGER { + failed (0), + succeeded (1), + sigupdated (2), + enabled (3), + disabled (4) + } + + +TrellixIDSCardType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Card type aplicable to Trellix IPS. + Current support limted to + - Management card + - Sensor Analysis card" + SYNTAX INTEGER { + other (0), + mgmt (1), + sensor (2) + } + + +TrellixIDSOperatingMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Operating mode for Trellix IPS Sensor + + inline-fail-open-passive: read and forward packets to destination. This + will be fail-open (passive kit) + monitor-dual-intf: monitor two interfaces using Tap + monitor-single-intf: monitor span/hub + inline-fail-close: Uses span dongle cables for the 10/100 + uses external bypass switch for gigabit + inline-fail-open-active:read and forward packets to destination. This + will be fail-open. This is available on M-series only. + " + SYNTAX INTEGER { + inline-fail-open-passive (1), + monitor-dual-intf (2), + monitor-single-intf (3), + inline-fail-close (4), + inline-fail-open-active (5) + } + + +TrellixIDSPortType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Indicates type of port. + gigabitEthernet supports only 1000Mbps, fastEthernet supports + 10/100 Mbps, copperGigabitEthernet supports 10/100/1000 Mbps and + tenGigabitEthernet supports only 10 Gbps." + SYNTAX INTEGER { + other (0), + gigabitEthernet (1), + fastEthernet (2), + copperGigabitEthernet (3), + tenGigabitEthernet (4), + fortyGigabitEthernet (5), -- support in R-series only + vnic(6) -- support in V-series only + } + + +TrellixIDSResponseMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + interace-port(0), + response-port (1), + management-port (2) + } + + +TrellixProductType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + ids (0) + } + + +TrellixTFTPAction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + other (0), + download-image (1), + download-signature (2), + upload-dos (3), + upload-trace (4), + download-dos (5), + abort-transfer (6), + download-sslcert (7), + download-image-and-signature (8), + download-mpecert (9), + download-sgap-ssl-cert (10), + upload-sgap-ssl-csr (11), + upload-ibac-ad-file (12), + download-ibac-ad-file (13), + upload-sw-tlv-file (14), + download-PacketCaptureFilter-file(15), + upload-PacketCaptureFilter-file(16), + download-geolocation-db-file (17), + upload-PacketCapturePCAP-file(18), + download-usrid-acl-file(19), + download-bot-dat-file(20), + download-ntba-ssl-cert-file(21), + upload-dev-prof-file(22), +-- values 23 and 24 not used as NSM has reserved them for NTBA + download-matd-ssl-cert-file(25), + download-ffp-bulk-update(28), + download-zcenter-ssl-cert(33), + download-gti-pc-ssl-cert(34), + upload-suricata-failed-rules-file(35), + upload-ca-sensor-csr (36), + download-ca-sensor-cert (37), + download-syslog-ssl-cert (38) + } + + +TrellixTFTPFailedResult ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This object defines reasons for TFTP failure. + Applicable only when the corresponding is set to 'failed'." + SYNTAX INTEGER { + other (0), + invalidFileName (1), + invalidFileType (2), + cannotReachServer (3), + noResponseFromServer (4), + insufficientDiskSpace (5), + decryptionError (6), + accessViolation (7), + fileAlreadyExists (8), + channelOutOfSync (9), + sensorNotInitialized (10), + realtimeUpdateError (11), + sigfile1OpenError (12), + sigfile1StatError (13), + sigfile1MemoryError (14), + sigfile1ReadError (15), + sigfile1NullError (16), + sigfile1MD5Error (17), + sigfile1InsufficientSpaceForTotalRules (18), + sigfile1ConvertError (19), + sigfile1SplitError (20), + sigfile2OpenError (21), + sigfile2StatError (22), + sigfile2MemoryError (23), + sigfile2ReadError (24), + sigfile2NullError (25), + sigfile2MD5Error (26), + sigfile2InsufficientSpaceForTotalRules (27), + sigfile2ConvertError (28), + sigfile2SplitError (29), + initIDConvertTablesError (30), + sigfileMarkError (31), + sigfileUndoMarkError (32), + compareSigfilesError (33), + updateBaseSigfileError (34), + sensorRebootRequired (35), + fileParseError (36), + sigfile1FormatVersionError (37), + sigfile2FormatVersionError (38), + fileDoesNotExists (39), + outOfMemoryError (40), + transferAborted (41), + internalApplyError (42), + incrSigfileUnspportedError (53), + incrSigfileFormatError (61), + incrSigfileHasSigsetMismatchError (62), + incrSigfileMergeError (63) + } + + +TrellixTFTPFileType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "" + SYNTAX INTEGER { + other (0), + image (1), + signature (2), + trace (3), + dos (4), + configuration (5), + sslcert (6), + image-and-signature (7), + mpecert (8) + } + + +TrellixTFTPInProgressResult ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This object defines user feedback during TFTP progress. + Applicable only when corresponding is set to 'inProgress'. + Indicates percentage of TFTP up/download during the inProgress mode " + SYNTAX Integer32 (0..100) + + +TrellixTFTPStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Indicates status of corresponding TFTP action request." + SYNTAX INTEGER { + other (0), + failed (1), + inProgress (2), + succeeded (3), + dwnldFailed (11), + applyFailed (12), + dwnlding (21), + dwnldingComplete (22), + applying (23), + applyingComplete (24) + } + +TrellixCUGEType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specify speed for copper gigabit ethernet ports. + example: 10 or 100 or 1000Mbps or auto" + SYNTAX INTEGER { + other (0), + ten-Mbps (1), + hundred-Mbps (2), + auto-negotiate (3), + one-gbps (4) + } + +TrellixPortSpeed ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specify speed for all types of ports. + example: 10 or 100 or 1000Mbps or auto or 10Gbps" + SYNTAX INTEGER { + other (0), + fixed-ten-Mbps (1), + fixed-hundred-Mbps (2), + auto-negotiate-down-hundred-Mbps(3), + fixed-one-Gbps(4), + fixed-ten-Gbps(5), -- support in M-series only + auto-negotiate-ten-Mbps (6), + auto-negotiate-hundred-Mbps (7), + auto-negotiate-one-Gbps(8), + auto-negotiate-ten-Gbps(9), -- support in M-series only + auto-negotiate-down-one-Gbps(10), + fixed-forty-Gbps(11) -- support in R-series only + } + +TrellixPluggableModuleType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Types of supported pluggable modules." + SYNTAX INTEGER { + other (0), + pluggable-module-qsfp (1), -- two 40 gig QSFP ports + pluggable-module-sfp-plus (2), -- eight SFP+ ports + pluggable-module-qsfp-4 (3), -- four port QSFP + pluggable-module-sfp-plus-12 (4), -- 12 port SFP+ + pluggable-module-rj45-6 (5), -- 6 port RJ45 + pluggable-module-sfp-plus-pfo-4-sm (6), -- 4 port SFP+ BPFO single mode + pluggable-module-sfp-plus-pfo-4-mm-50um (7), -- 4 port SFP+ BPFO multi mode 50um + pluggable-module-sfp-plus-pfo-4-mm-62-5um (8), -- 4 port SFP+ BPFO multi mode 62.5um + fixed-ports-sfp-12 (9), -- twelve SFP ports + pluggable-module-rj45-4 (10) -- 4 port RJ45 + } + +TrellixPortLinearIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This MIB object type indicates the Linear Index of the monitoring port. This index is + generated by the sensor appliance using the pair of slot index and the port index values. + The other MIB tables would directly use this linear index, whereever applicable." + SYNTAX Integer32 (0..1024) + + +END + -- cgit v1.2.3