mibs/MIBS/accedian/ACD-SMAP-MIB

467 lines
16 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2008, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
ACD-SMAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DisplayString, TruthValue, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
acdMibs
FROM ACCEDIAN-SMI;
acdSmap MODULE-IDENTITY
LAST-UPDATED "200810010100Z"
ORGANIZATION "Accedian Networks, Inc."
CONTACT-INFO
"Accedian Technical Assistance Center
Accedian Networks, Inc.
4878 Levy, suite 202
Saint-Laurent, Quebec Canada H4R 2P1
E-mail: support@accedian.com"
DESCRIPTION
"The Service mapping database for this Accedian Networks device."
REVISION "200810010100Z" -- 1 October 2008
DESCRIPTION
"Definition revision."
REVISION "200806150100Z" -- 15 June 2008
DESCRIPTION
"Initial version of MIB module ACD-SMAP-MIB."
::= { acdMibs 8 }
acdSmapNotifications OBJECT IDENTIFIER ::= { acdSmap 0 }
acdSmapMIBObjects OBJECT IDENTIFIER ::= { acdSmap 1 }
acdSmapConformance OBJECT IDENTIFIER ::= { acdSmap 2 }
acdSmapConfig OBJECT IDENTIFIER ::= { acdSmapMIBObjects 1 }
---------------------------------------------------------------------------
-- The CoS Profile configuration table
-- This table contains all CoS Profile entry configurations.
---------------------------------------------------------------------------
acdSmapCoSProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapCoSProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CoS profile table. Each row in the table represents a CoS Profile.
A CoS profile is used to map an input packet to an L2 class of service.
This traffic mapping (classification) is accomplished using one of
the following fields in the incoming packet:
p-bits in 802.1Q / 802.1Q-in-Q tags
IP precedence bits in IPv4 TOS byte
DSCP bits in IPv4 DSCP byte
The class of service value (0-7) assigned to the outgoing traffic is
selected based on the conformance level (Green/Yellow) of the incoming
traffic. The following sections describe the general configuration
parameters and the mapping table of a CoS profile."
::= { acdSmapConfig 1 }
acdSmapCoSProfEntry OBJECT-TYPE
SYNTAX AcdSmapCoSProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings to manage a CoS profile."
INDEX { acdSmapCoSProfID }
::= { acdSmapCoSProfTable 1 }
AcdSmapCoSProfEntry ::= SEQUENCE {
acdSmapCoSProfID Unsigned32,
acdSmapCoSProfRowStatus RowStatus,
acdSmapCoSProfName DisplayString,
acdSmapCoSProfType INTEGER,
acdSmapCoSProfDecodeDropBit TruthValue,
acdSmapCoSProfEncodeDropBit TruthValue
}
acdSmapCoSProfID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each CoS Profile instance."
::= { acdSmapCoSProfEntry 1 }
acdSmapCoSProfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new CoS Profile you shall provide the a unique name and the
type for an empty row with the RowStatus set to Create and Go. To
delete the CoS Profile you need to set the RowStatus to destroy."
::= { acdSmapCoSProfEntry 2 }
acdSmapCoSProfName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to uniquely identify the CoS profile."
::= { acdSmapCoSProfEntry 3 }
acdSmapCoSProfType OBJECT-TYPE
SYNTAX INTEGER {
pcp(1),
dscp(2),
pre(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of CoS profile. Possible values are: PCP, IP
precedence or DSCP."
::= { acdSmapCoSProfEntry 4 }
acdSmapCoSProfDecodeDropBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is only valid for PCP CoS profiles. If this field is set,
the pre-marking color is decoded from the DEI bit (Drop Eligible
Indication). Otherwise, the user defined pre-color is used."
DEFVAL { false }
::= { acdSmapCoSProfEntry 5 }
acdSmapCoSProfEncodeDropBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field controls the DEI bit in an S-VLAN tag. If this field is set
and the outgoing packet is marked yellow then the DEI bit is set to 1.
Otherwise, the DEI is set to 0."
DEFVAL { false }
::= { acdSmapCoSProfEntry 6 }
---------------------------------------------------------------------------
-- The CoS Profile Code Point configuration table
-- This table contains all Code Point for a CoS profile entry.
---------------------------------------------------------------------------
acdSmapCoSProfCodePointTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapCoSProfCodePointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Configuration table of all code point entries. Each row in the
table represents a Code point. the number of code points depend of the
acdSmapCoSProfType value.
p-bits in 802.1Q / 802.1Q-in-Q tags
IP precedence bits in IPv4 TOS byte
DSCP bits in IPv4 DSCP byte
The class of service value (0-7) assigned to the outgoing traffic is
selected based on the conformance level (Green/Yellow) of the incoming
traffic."
::= { acdSmapConfig 2 }
acdSmapCoSProfCodePointEntry OBJECT-TYPE
SYNTAX AcdSmapCoSProfCodePointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings for a code point."
INDEX { acdSmapCoSProfID, acdSmapCoSProfCodePointID }
::= { acdSmapCoSProfCodePointTable 1 }
AcdSmapCoSProfCodePointEntry ::= SEQUENCE {
acdSmapCoSProfCodePointID Unsigned32,
acdSmapCoSProfCodePointPreMarkingColor INTEGER,
acdSmapCoSProfCodePointGreenOut Unsigned32,
acdSmapCoSProfCodePointYellowOut Unsigned32
}
acdSmapCoSProfCodePointID OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each row. Base on Code Point, 0 to 63 for DSCP or 0
to 7 for PCP or IP precedence."
::= { acdSmapCoSProfCodePointEntry 1 }
acdSmapCoSProfCodePointPreMarkingColor OBJECT-TYPE
SYNTAX INTEGER {
green(1),
yellow(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the user pre-color to mark the incoming traffic. This field
is only valid if acdSmapCoSProfDecodeDropBit is not set."
DEFVAL { green }
::= { acdSmapCoSProfCodePointEntry 2 }
acdSmapCoSProfCodePointGreenOut OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The class of service value that will be used in the outgoing green
packets. This value is selected if the result of the bandwidth
regulator assigned to this entry is green or if the pre-marking
color is green and no bandwidth regulator is assigned to this entry."
DEFVAL { 0 }
::= { acdSmapCoSProfCodePointEntry 3 }
acdSmapCoSProfCodePointYellowOut OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The class of service value that will be used in the outgoing yellow
packets. This value is selected if the result of the bandwidth
regulator assigned to this entry is yellow or if the pre-marking
color is yellow and no bandwidth regulator is assigned to this entry."
DEFVAL { 0 }
::= { acdSmapCoSProfCodePointEntry 4 }
---------------------------------------------------------------------------
-- The Regulator Set configuration table
-- This table contains all Regulator Set entry configurations.
---------------------------------------------------------------------------
acdSmapRegSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapRegSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Regulator Set profile table. Each row in the table represents a
Regulator Set. A bandwidth regulator set allows the user to regulate
traffic based on the following information:
p-bits in 802.1Q / 802.1Q-in-Q tags
IP precedence bits in IPv4 TOS byte
DSCP bits in IPv4 DSCP byte.
"
::= { acdSmapConfig 3 }
acdSmapRegSetEntry OBJECT-TYPE
SYNTAX AcdSmapRegSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings to manage a Regulator set."
INDEX { acdSmapRegSetID }
::= { acdSmapRegSetTable 1 }
AcdSmapRegSetEntry ::= SEQUENCE {
acdSmapRegSetID Unsigned32,
acdSmapRegSetRowStatus RowStatus,
acdSmapRegSetName DisplayString,
acdSmapRegSetType INTEGER
}
acdSmapRegSetID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each Regulator set instance."
::= { acdSmapRegSetEntry 1 }
acdSmapRegSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new Regulator set you shall provide the a unique name and the
type for an empty row with the RowStatus set to Create and Go. To
delete the CoS Profile you need to set the RowStatus to destroy."
::= { acdSmapRegSetEntry 2 }
acdSmapRegSetName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a string to uniquely identify the Regulator set."
::= { acdSmapRegSetEntry 3 }
acdSmapRegSetType OBJECT-TYPE
SYNTAX INTEGER {
pcp(1),
dscp(2),
pre(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of Regulator Set. Possible values are: PCP, IP
precedence or DSCP."
::= { acdSmapRegSetEntry 4 }
---------------------------------------------------------------------------
-- The Regulator Set Code Point configuration table
-- This table contains all Code Point for a Regulator set profile entry.
---------------------------------------------------------------------------
acdSmapRegSetCodePointTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSmapRegSetCodePointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Configuration table of all code point entries. Each row in the
table represents a Code point. the number of code points depend of the
acdSmapCoSProfType value.
p-bits in 802.1Q / 802.1Q-in-Q tags;
IP precedence bits in IPv4 TOS byte;
DSCP bits in IPv4 DSCP byte.
"
::= { acdSmapConfig 4 }
acdSmapRegSetCodePointEntry OBJECT-TYPE
SYNTAX AcdSmapRegSetCodePointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings for a code point."
INDEX { acdSmapRegSetID, acdSmapRegSetCodePointID }
::= { acdSmapRegSetCodePointTable 1 }
AcdSmapRegSetCodePointEntry ::= SEQUENCE {
acdSmapRegSetCodePointID Unsigned32,
acdSmapRegSetCodePointRegulatorID Unsigned32,
acdSmapRegSetCodePointRegulatorEnable TruthValue
}
acdSmapRegSetCodePointID OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each row. Base on Code Point, 0 to 64 for DSCP or 0
to 7 for PCP or IP precedence."
::= { acdSmapRegSetCodePointEntry 1 }
acdSmapRegSetCodePointRegulatorID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bandwidth regulator that will be used to regulate the traffic flow
that has this PCP/IP precendence/DSCP value. Refer to acdRegulatorTable
to find the exact identifier (same as acdRegulatorID)."
DEFVAL { 0 }
::= { acdSmapRegSetCodePointEntry 2 }
acdSmapRegSetCodePointRegulatorEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable traffic regulation for this PCP, IP precedence or
DSCP value."
DEFVAL { false }
::= { acdSmapRegSetCodePointEntry 3 }
---------------------------------------------------------------------------
-- ACD-SMAP-MIB Module - Conformance Information
---------------------------------------------------------------------------
acdSmapCompliances OBJECT IDENTIFIER ::= { acdSmapConformance 1 }
acdSmapGroups OBJECT IDENTIFIER ::= { acdSmapConformance 2 }
---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------
acdSmapCoSProfGroup OBJECT-GROUP
OBJECTS {
acdSmapCoSProfRowStatus,
acdSmapCoSProfName,
acdSmapCoSProfType,
acdSmapCoSProfDecodeDropBit,
acdSmapCoSProfEncodeDropBit
}
STATUS current
DESCRIPTION
"Objects for the CoS profile Group."
::= { acdSmapGroups 1 }
acdSmapCoSProfCodePointGroup OBJECT-GROUP
OBJECTS {
acdSmapCoSProfCodePointPreMarkingColor,
acdSmapCoSProfCodePointGreenOut,
acdSmapCoSProfCodePointYellowOut
}
STATUS current
DESCRIPTION
"Objects for the CoS profile CodePoint Group."
::= { acdSmapGroups 2 }
acdSmapRegSetGroup OBJECT-GROUP
OBJECTS {
acdSmapRegSetRowStatus,
acdSmapRegSetName,
acdSmapRegSetType
}
STATUS current
DESCRIPTION
"Objects for the Regulator Set Group."
::= { acdSmapGroups 3 }
acdSmapRegSetCodePointGroup OBJECT-GROUP
OBJECTS {
acdSmapRegSetCodePointRegulatorID,
acdSmapRegSetCodePointRegulatorEnable
}
STATUS current
DESCRIPTION
"Objects for the Regulator Set CodePoint Group."
::= { acdSmapGroups 4 }
acdSmapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the ACD-SMAP-MIB module."
MODULE
MANDATORY-GROUPS {
acdSmapCoSProfGroup,
acdSmapCoSProfCodePointGroup,
acdSmapRegSetGroup,
acdSmapRegSetCodePointGroup
}
OBJECT acdSmapCoSProfRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
OBJECT acdSmapRegSetRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
::= { acdSmapCompliances 1 }
END