mibs/MIBS/adva/CM-IP-MIB

CM-IP-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32
                FROM SNMPv2-SMI
        MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF
        MacAddress, RowStatus, StorageType, DisplayString, VariablePointer,  
        TEXTUAL-CONVENTION,  TruthValue
                FROM SNMPv2-TC
        VlanId, IpVersion
             FROM  CM-COMMON-MIB
        Ipv6Address
             FROM  IPV6-TC
        fsp150cm
             FROM  ADVA-MIB;

cmIPMIB MODULE-IDENTITY
    LAST-UPDATED    "201903140000Z"
    ORGANIZATION    "ADVA Optical Networking SE"
    CONTACT-INFO
        "Web URL: http://adva.com/
        E-mail:  support@adva.com
        Postal:  ADVA Optical Networking SE
             Campus Martinsried
             Fraunhoferstrasse 9a
             82152 Martinsried/Munich
             Germany
        Phone: +49 089 89 06 65 0
        Fax:  +49 089 89 06 65 199 "
    DESCRIPTION
            "This module defines the IP MIB definitions used by 
             the F3 (FSP150CM/CC) product lines.
             Copyright (C) ADVA."
    REVISION        "201903140000Z"
    DESCRIPTION
            "
            Notes from release 201903140000Z
              (1) Added cmIpInterfaceGateway to cmIpInterfaceTable
              (2) Added cmIpv6InterfaceGateway to cmIpv6InterfaceTable

            Notes from release 201904050000Z
              (1) chaned cmStaticRouteNextHop to RO
              (2) chaned cmIpv6StaticRouteNextHop to RO

            Notes from release 201902030000Z
              (1) added cmIpTraceRouteInterface
              (2) added cmIpv6TraceRouteInterface

           Notes from release 201901300000Z
              (1) added cmPingInterface            
            
            Notes from release 201901070000Z
              (1) Modified cmStaticRouteNextHop: MAX-ACCESS read-write instead read-only
              (2) Modified cmIpv6StaticRouteNextHop: MAX-ACCESS read-write instead not-accessible

            Notes from release 201802130000Z
             (1) added ipLoopbackInterfaceTable
            Notes from release 201802020000Z,
             (1) Added cmIpInterfaceDhcpVendorInfoHideControl to cmIpInterfaceTable
             (2) Added ipManagementTunnelDhcpVendorInfoHideControl to ipManagementTunnelTable
            
            Notes from release 201407180000Z,
             (1) Added new IpManagementTunnelType literals:
                 - gcc0based,
                 - gcc1based,
                 - gcc2based.

            Notes from release 201012080000Z,
             (1)Added cmIpManagementTrafficBridgingSecurityEnabled scalar
             for the Bridged Management LAN feature on GE20x devices
             for Release 5.1CC. 

            Notes from release 201010230000Z,
             (1)Added cmIpManagementTrafficBridgingEnabled scalar
             for the Bridged Management LAN feature on GE20x devices
             for Release 5.1CC. 

            Notes from release 200904200000Z,
             (1)MIB version ready for release FSP150CC 4.1.
              (a)Added new table IpManagementTunnel
              (b)Added attribute cmIpInterfaceRIPv2Enabled
              (c)Added attribute cmARPEntryType 
              (d)Added attribute cmStaticRouteInterface, cmStaticRouteAdvertise 

            Notes from release 200803030000Z,
             (1)MIB version ready for release FSP150CM 3.1." 
    ::= {fsp150cm 11}    

-- 
-- OID definitions
-- 
cmIpObjects         OBJECT IDENTIFIER ::= {cmIPMIB 1}
cmIpConformance     OBJECT IDENTIFIER ::= {cmIPMIB 2}
cmIpScalars         OBJECT IDENTIFIER ::= {cmIPMIB 3}

-- 
-- Textual Conventions 
-- 
CmDhcpRole ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "DHCP role when DHCP is enabled on an interface."
    SYNTAX       INTEGER {
                   dhcp-client(1),
                   dhcp-server(2)
                 }

IpManagementTunnelType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "IP Management Tunnel type."
    SYNTAX       INTEGER {
                   macbased(1),
                   vlanbased(2),
                   itagbased(3),
                   gcc0based(4),
                   gcc1based(5),
                   gcc2based(6)
                 }

IpManagementTunnelEncapsulationType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "IP Management Tunnel Encapsulation type."
    SYNTAX       INTEGER {
                   ethernet(1),
                   ppp(2)
                 }

IpEntryType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "IP Entry type."
    SYNTAX       INTEGER {
                   static(1),
                   dynamic(2)
                 }

IpSourceAddrType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "IP Source Address type."
    SYNTAX       INTEGER {
                   systemipaddr(1),
                   outipinterfaceaddr(2)
                 }

IpActionType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "."
     SYNTAX    INTEGER {
                 not-applicable(0),
                 initiate (1)
               }

Ipv6OverIpv4TunnelType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "include four types."
     SYNTAX    INTEGER {
                 sixToFour (1),
                 ipv4-compatible (2),
                 isatap (3),
                 static-config (4),
                 gre (5),
                 ipv6-6rd (6)
               }

IpMode ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "include 3 types."
     SYNTAX    INTEGER {
                 ipv4-only (0),
                 ipv6-only (1),
                 ipv4-and-ipv6(2)
               }

DHCPCIDType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "DHCP Client ID Type."
     SYNTAX    INTEGER {
                 notApplicable(1),
                 sysName(2),
                 macAddr(3),
                 userDefined(4),
                 serialNumber(5)
               }

DHCPHostNameType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "DHCP Hostname Type."
     SYNTAX    INTEGER {
                 notApplicable(1),
                 sysName(2),
                 userDefined(3)
               }

PtpArpActionType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "."
     SYNTAX    INTEGER {
                 not-applicable(0),
                 retrieve (1)
               }

DHCPVendorInfoType ::= TEXTUAL-CONVENTION
     STATUS       current
     DESCRIPTION 
         "DHCP Vendor Info Type."
     SYNTAX    INTEGER {
                 notApplicable(1),
                 sysName(2),
                 userDefined(3)
               }

-- Scalars
cmIpSystemScalars      OBJECT IDENTIFIER ::= {cmIpScalars 1}
cmIpSourceAddrScalars  OBJECT IDENTIFIER ::= {cmIpScalars 2}

cmIpFlushARPCacheAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate Flush ARP action."
    ::= { cmIpSystemScalars 1 }

cmIpProxyARPEnabled OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to enable/disable Proxy ARP."
    ::= { cmIpSystemScalars 2 }

cmIpPingDestination OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IP Address to which
        ICMP Ping will be initiated."
    ::= { cmIpSystemScalars 3 }

cmIpInitiatePingAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate ICMP Ping on cmIpPingDestination."
    ::= { cmIpSystemScalars 4 }

cmIpPingResult OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..1024))
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object provides the results of a previous ICMP Ping Action."
    ::= { cmIpSystemScalars 5 }

cmIpTraceRouteDestination OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IP Address to which
        Trace Route will be initiated."
    ::= { cmIpSystemScalars 6 }

cmIpInitiateTraceRouteAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate TraceRoute 
        on cmIpTraceRouteDestination."
    ::= { cmIpSystemScalars 7 }

cmIpTraceRouteResult OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..1024))
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object provides the results of a previous TraceRoute Action."
    ::= { cmIpSystemScalars 8 }

cmIpManagementTrafficBridgingEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to control the IP Management Traffic
        Bridging feature.  When enabled, the system is managed using the
        IP address specified at the Management LAN port.  All IP packets
        that are not terminated at the node will be bridged over the 
        Management LAN." 
    ::= { cmIpSystemScalars 9 }

cmIpManagementTrafficBridgingSecurityEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to control the IP Management Traffic
        Bridging feature's security.  When enables, the system supports 
        a secure Management Traffic Bridge." 
    ::= { cmIpSystemScalars 10 }

cmIpv6PingInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV6 Address related interface."
    ::= { cmIpSystemScalars 11 }

cmIpv6PingDestination OBJECT-TYPE
    SYNTAX Ipv6Address
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV6 Address to which
        ICMP Ping will be initiated."
    ::= { cmIpSystemScalars 12 }

cmIpv6InitiatePingAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate ICMP Ping on cmIpv6PingDestination."
    ::= { cmIpSystemScalars 13 }

cmIpv6TraceRouteDestination OBJECT-TYPE
    SYNTAX Ipv6Address
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV6 Address to which
        Trace Route will be initiated."
    ::= { cmIpSystemScalars 14 }

cmIpv6InitiateTraceRouteAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate TraceRoute 
        on cmIpv6TraceRouteDestination."
    ::= { cmIpSystemScalars 15 }

cmIpv6ProxyNDPEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object whether enabled proxy NDP." 
    ::= { cmIpSystemScalars 16 }

cmIpv6FwdEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object whether NE works in router mode or host mode.
       Forwarding enable:router mode, forwarding disable: host mode." 
    ::= { cmIpSystemScalars 17 }

cmIpFlushNDPCacheAction OBJECT-TYPE
    SYNTAX IpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to initiate Flush NDP action."
    ::= { cmIpSystemScalars 18 }

cmIpPtpArpRtrvAction OBJECT-TYPE
    SYNTAX PtpArpActionType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "If user want to get PTP arp from cmARPEntry, user need to configure this object first."
    ::= { cmIpSystemScalars 19 }

cmIpManagementTrafficDscpEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object controls whether the DSCP value is modified for the transmitted
        management traffic whether it is locally generated or routed."
    ::= { cmIpSystemScalars 20 }
 
cmIpManagementTrafficDscp OBJECT-TYPE
    SYNTAX     Unsigned32 (0..63)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object specifies the DSCP value and it is applicable when
        cmIpManagementTrafficDscpEnabled is enabled."
    ::= { cmIpSystemScalars 21 }

cmIpManagementTrafficBridgingInterface OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify the name of
        the IP interface the IP address of which shall be used as the
        IP address of the Management Bridge."
    ::= { cmIpSystemScalars 22 }

cmIpManagementTrafficBridgingIpv4Gateway OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify the IPv4 default gateway 
        for the Management Bridge."
    ::= { cmIpSystemScalars 23 }

cmIpManagementTrafficBridgingIpv6Gateway OBJECT-TYPE
    SYNTAX     Ipv6Address
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify the IPv6 default gateway 
        for the Management Bridge."
    ::= { cmIpSystemScalars 24 }


cmPingInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV4 Address related interface."
    ::= { cmIpSystemScalars 25 }

cmIpTraceRouteInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV4 Address related interface."
    ::= { cmIpSystemScalars 26 }

cmIpv6TraceRouteInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IPV6 Address related interface."
    ::= { cmIpSystemScalars 27 }

cmIpSNMPv1InterfaceName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify the IP interface name,
        which will be used in the SNMPv1 TRAP PDUs as the Agent's IP Address."
    ::= { cmIpSourceAddrScalars 1 }

cmIpSourceAddressType OBJECT-TYPE
    SYNTAX     IpSourceAddrType 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify whether the System IP
        Address or the Outgoing IP Interface's Address should be used 
        in outgoing IP PDUs."
    ::= { cmIpSourceAddrScalars 2 }

cmIpSourceAddressInterfaceName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "This object allows the user to specify the IP interface name when
        cmIpSourceAddressType is 'systemipaddr'.  The IP Address associated
        with the IP interface name is set as the source IP Address in
        outgoing PDUs." 
    ::= { cmIpSourceAddrScalars 3 }


--  FSP150 CM IP Interface Configuration Table
cmIpInterfaceTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF CmIpInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "User managed IP Address Table." 
    ::= { cmIpObjects 1 }

cmIpInterfaceEntry OBJECT-TYPE
    SYNTAX   CmIpInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "Allows management of IP Interfaces."
    INDEX { cmIpInterfaceName }
    ::= { cmIpInterfaceTable 1 }

CmIpInterfaceEntry ::= SEQUENCE {
        cmIpInterfaceName                  DisplayString,
        cmIpInterface                      IpAddress,
        cmIpInterfaceMask                  IpAddress,
        cmIpInterfaceDhcpEnabled           TruthValue,
        cmIpInterfaceMTU                   Integer32,
        cmIpInterfaceDhcpRole              CmDhcpRole,
        cmIpInterfacePhysicalAddress       DisplayString,
        cmIpInterfaceRIPv2Enabled          TruthValue,
        cmIpInterfaceDHCPClientIdEnabled   TruthValue,
        cmIpInterfaceDHCPClientId          DisplayString,
        cmIpInterfaceIpMode                IpMode,
        cmIpInterfaceDhcpClassIdEnabled    TruthValue,
        cmIpInterfaceDhcpHostNameEnabled   TruthValue,
        cmIpInterfaceDhcpHostName          DisplayString,
        cmIpInterfaceDhcpLogServerEnabled  TruthValue,
        cmIpInterfaceDhcpNTPServerEnabled  TruthValue,
        cmIpInterfaceDhcpClientIdType      DHCPCIDType,
        cmIpInterfaceDhcpHostNameType      DHCPHostNameType,
        cmIpInterfaceDhcpVendorInfoEnabled TruthValue,
        cmIpInterfaceDhcpVendorInfoType    DHCPVendorInfoType,
        cmIpInterfaceDhcpVendorInfo        DisplayString,
        cmIpInterfaceDhcpVendorInfoHideControl TruthValue,
        cmIpInterfaceGateway               IpAddress
    }

cmIpInterfaceName   OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Name of the IP interface."
    ::= { cmIpInterfaceEntry 1 }

cmIpInterface   OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "IP Address of the interface." 
    ::= { cmIpInterfaceEntry 2 }

cmIpInterfaceMask OBJECT-TYPE
    SYNTAX   IpAddress
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "IP Mask of the interface." 
    ::= { cmIpInterfaceEntry 3 }

cmIpInterfaceDhcpEnabled OBJECT-TYPE
    SYNTAX   TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "Whether or not DHCP is enabled on this interface."
    ::= { cmIpInterfaceEntry 4 }

cmIpInterfaceMTU OBJECT-TYPE
    SYNTAX   Integer32 (0..1500)
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "IP Interface MTU."
    DEFVAL { 1 }
    ::= { cmIpInterfaceEntry 5 }

cmIpInterfaceDhcpRole OBJECT-TYPE
    SYNTAX   CmDhcpRole
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "Specify the DHCP role on this interface."
    ::= { cmIpInterfaceEntry 6 }

cmIpInterfacePhysicalAddress OBJECT-TYPE
    SYNTAX   DisplayString (SIZE (0..32))
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "Physical Address associated with the IP Address."
    ::= { cmIpInterfaceEntry 7 }

cmIpInterfaceRIPv2Enabled OBJECT-TYPE
    SYNTAX   TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows to enable/disable RIPv2 on the IP Interface."
    ::= { cmIpInterfaceEntry 8 }

cmIpInterfaceDHCPClientIdEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object enables DHCP Option 61 on the IP interface.  This object
        is only applicable when DHCP client is enabled."
    ::= { cmIpInterfaceEntry 9 }

cmIpInterfaceDHCPClientId OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object is applicable when cmIpInterfaceDHCPClientIdEnabled is
        set to TRUE.  It allows users to specify the DHCP Client Id as
        a DisplayString - instead of the MAC address."
    ::= { cmIpInterfaceEntry 10 }

cmIpInterfaceIpMode OBJECT-TYPE
    SYNTAX  IpMode
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object is the ipmode for the interface."
    ::= { cmIpInterfaceEntry 11 }

cmIpInterfaceDhcpClassIdEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether class id editable enabled."
    ::= { cmIpInterfaceEntry 12 }

cmIpInterfaceDhcpHostNameEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether host name editable enabled."
    ::= { cmIpInterfaceEntry 13 }

cmIpInterfaceDhcpHostName OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the host name."
    ::= { cmIpInterfaceEntry 14 }

cmIpInterfaceDhcpLogServerEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp log server enabled."
    ::= { cmIpInterfaceEntry 15 }

cmIpInterfaceDhcpNTPServerEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp ntp server enabled."
    ::= { cmIpInterfaceEntry 16 }

cmIpInterfaceDhcpClientIdType OBJECT-TYPE
    SYNTAX  DHCPCIDType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp cid type."
    ::= { cmIpInterfaceEntry 17 }

cmIpInterfaceDhcpHostNameType OBJECT-TYPE
    SYNTAX  DHCPHostNameType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp host name type."
    ::= { cmIpInterfaceEntry 18 }

cmIpInterfaceDhcpVendorInfoEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the vendor information whether enabled."
    ::= { cmIpInterfaceEntry 19 }

cmIpInterfaceDhcpVendorInfoType OBJECT-TYPE
    SYNTAX  DHCPVendorInfoType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp vendor information type."
    ::= { cmIpInterfaceEntry 20 }

cmIpInterfaceDhcpVendorInfo OBJECT-TYPE
    SYNTAX     DisplayString 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the vendor information."
    ::= { cmIpInterfaceEntry 21 }

cmIpInterfaceDhcpVendorInfoHideControl OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp vendor info is hidden or not"
    ::= { cmIpInterfaceEntry 22 }

cmIpInterfaceGateway OBJECT-TYPE
    SYNTAX     IpAddress 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object desribes the IPv4 Gateway Address of the management interface on OSA540X."
    ::= { cmIpInterfaceEntry 23 }

--  FSP150 CM Static Routes Configuration Table
cmStaticRouteTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF CmStaticRouteEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "This entity's user configured Static IP Routing table."
    ::= { cmIpObjects 2 }

cmStaticRouteEntry OBJECT-TYPE
    SYNTAX   CmStaticRouteEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "A particular route to  a  particular  destina-
       tion, under a particular policy."
    INDEX {
        cmStaticRouteDest,
        cmStaticRouteMask,
        cmStaticRouteNextHop,
        cmStaticRouteInterface
        }
    ::= { cmStaticRouteTable 1 }

CmStaticRouteEntry ::= SEQUENCE {
        cmStaticRouteDest        IpAddress,
        cmStaticRouteMask        IpAddress,
        cmStaticRouteNextHop     IpAddress,
        cmStaticRouteMetric      Integer32,
        cmStaticRouteRowStatus   RowStatus,
        cmStaticRouteInterface   DisplayString,
        cmStaticRouteAdvertise   TruthValue
    }

cmStaticRouteDest OBJECT-TYPE
    SYNTAX   IpAddress
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "The destination IP address of this route.
       This object may not take a Multicast (Class  D)
       address value.
       Any assignment (implicit or  otherwise)  of  an
       instance  of  this  object to a value x must be
       rejected if the bitwise logical-AND of  x  with
       the  value of the corresponding instance of the
       cmStaticRouteMask object is not equal to x."
    ::= { cmStaticRouteEntry 1 }

cmStaticRouteMask OBJECT-TYPE
    SYNTAX   IpAddress
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "Indicate the mask to be logical-ANDed with the
       destination  address  before  being compared to
       the value  in  the  cmStaticRouteDest  field.   For
       those  systems  that  do  not support arbitrary
       subnet masks, an agent constructs the value  of
       the  cmStaticRouteMask  by  reference to the IP Ad-
       dress Class.
       Any assignment (implicit or  otherwise)  of  an
       instance  of  this  object to a value x must be
       rejected if the bitwise logical-AND of  x  with
       the  value of the corresponding instance of the
       cmStaticRouteDest object is not equal to
       cmStaticRouteDest."
    ::= { cmStaticRouteEntry 2 }

cmStaticRouteNextHop OBJECT-TYPE
    SYNTAX   IpAddress
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "On remote routes, the address of the next sys-
       tem en route; Otherwise, 0.0.0.0."
    ::= { cmStaticRouteEntry 3 }

cmStaticRouteMetric OBJECT-TYPE
    SYNTAX   Integer32 (0..65535)
    MAX-ACCESS read-create
    STATUS   current
    DESCRIPTION
       "The primary routing  metric  for  this  route.
       The  semantics of this metric are determined by
       the routing-protocol specified in  the  route's
       cmStaticRouteProto  value.   If  this metric is not
       used, its value should be set to 1."
    DEFVAL { 1 }
    ::= { cmStaticRouteEntry 4 }

cmStaticRouteRowStatus OBJECT-TYPE
    SYNTAX   RowStatus
    MAX-ACCESS read-create
    STATUS   current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { cmStaticRouteEntry 5 }

cmStaticRouteInterface   OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "Name of the IP interface for the interface static route."
    ::= { cmStaticRouteEntry 6 }

cmStaticRouteAdvertise   OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "Whether this static route will be advertised via routing protocol."
    ::= { cmStaticRouteEntry 7 }

--
-- FSP150 CM IP ARP Table
--
cmARPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CmARPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of ARP entries on the NIDs."
    ::= { cmIpObjects 3 }

cmARPEntry  OBJECT-TYPE
    SYNTAX      CmARPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the cmARPTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { cmARPInterface, cmARPIPAddress }
    ::= { cmARPTable 1 }

CmARPEntry ::= SEQUENCE {
    cmARPIndex          Integer32,
    cmARPIPAddress      IpAddress,
    cmARPMacAddress     MacAddress,
    cmARPInterface      DisplayString,
    cmARPStorageType    StorageType,
    cmARPRowStatus      RowStatus,
    cmARPEntryType      IpEntryType 
}

cmARPIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
            "An integer index value used to uniquely identify
             this ARP Entry in the cmARPTable."
    ::= { cmARPEntry 1 }

cmARPIPAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows configuration of the ARP Entry IP Address."
     ::= { cmARPEntry 2 }

cmARPMacAddress OBJECT-TYPE
    SYNTAX     MacAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the ARP Entry MAC Address."
     ::= { cmARPEntry 3 }

cmARPInterface OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..15))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the ARP Entry Interface."
     ::= { cmARPEntry 4 }

cmARPStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { cmARPEntry 5 }

cmARPRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The cmARPRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { cmARPEntry 6 }

cmARPEntryType OBJECT-TYPE
    SYNTAX     IpEntryType
    MAX-ACCESS read-write 
    STATUS     current
    DESCRIPTION
            "The type of ARP Entry. Note that static entries can be created."
    ::= { cmARPEntry 7 }

--
-- FSP150 CM Proxy ARP Table
--
cmProxyARPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CmProxyARPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of Proxy ARP entries on the NIDs.  This table is not 
             supported in GE206 Release 4.1CC."
    ::= { cmIpObjects 4 }

cmProxyARPEntry  OBJECT-TYPE
    SYNTAX      CmProxyARPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the cmProxyARPTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { cmProxyARPInterface, cmProxyARPIPAddress, cmProxyARPSubnetMask }
    ::= { cmProxyARPTable 1 }

CmProxyARPEntry ::= SEQUENCE {
    cmProxyARPIndex         Integer32,
    cmProxyARPIPAddress     IpAddress,
    cmProxyARPSubnetMask    IpAddress,
    cmProxyARPInterface     DisplayString,
    cmProxyARPStorageType   StorageType,
    cmProxyARPRowStatus     RowStatus
}

cmProxyARPIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      deprecated
    DESCRIPTION
            "An integer index value used to uniquely identify
             this Proxy ARP Entry in the cmProxyARPTable."
    ::= { cmProxyARPEntry 1 }

cmProxyARPIPAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows configuration of the ProxyARP Entry IP Address."
     ::= { cmProxyARPEntry 2 }

cmProxyARPSubnetMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the Proxy ARP Entry Subnet Mask."
     ::= { cmProxyARPEntry 3 }

cmProxyARPInterface OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..15))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the Proxy ARP Entry Interface."
     ::= { cmProxyARPEntry 4 }

cmProxyARPStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { cmProxyARPEntry 5 }

cmProxyARPRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The cmProxyARPRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { cmProxyARPEntry 6 }

--
-- FSP150 IP Management Tunnel Table
--
ipManagementTunnelTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpManagementTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of IP Management Tunnel entries on the fsp150 family of products."
    ::= { cmIpObjects 5 }

ipManagementTunnelEntry  OBJECT-TYPE
    SYNTAX      IpManagementTunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the ipManagementTunnelTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { ipManagementTunnelIndex }
    ::= { ipManagementTunnelTable 1 }

IpManagementTunnelEntry ::= SEQUENCE {
    ipManagementTunnelIndex               Integer32,
    ipManagementTunnelAssociatedPort      VariablePointer,
    ipManagementTunnelName                DisplayString,
    ipManagementTunnelType                IpManagementTunnelType,
    ipManagementTunnelMTU                 Integer32, 
    ipManagementTunnelEncapsulationType   IpManagementTunnelEncapsulationType,
    ipManagementTunnelIpAddress           IpAddress,
    ipManagementTunnelSubnetMask          IpAddress,
    ipManagementTunnelVlanId              VlanId,
    ipManagementTunnelSVlanEnabled        TruthValue,
    ipManagementTunnelSVlanId             VlanId,
    ipManagementTunnelDhcpEnabled         TruthValue,
    ipManagementTunnelRip2PktsEnabled     TruthValue,
    ipManagementTunnelPhysicalAddress     DisplayString,
    ipManagementTunnelCOS                 Integer32,
    ipManagementTunnelCIR                 Unsigned32,
    ipManagementTunnelEIR                 Unsigned32,
    ipManagementTunnelBufferSize          Unsigned32,
    ipManagementTunnelStorageType         StorageType,
    ipManagementTunnelRowStatus           RowStatus,
    ipManagementTunnelDHCPClientIdEnabled TruthValue,
    ipManagementTunnelDHCPClientId        DisplayString,
    ipManagementTunnelQosQueueProfile     VariablePointer,
    ipManagementTunnelCVlanEnabled        TruthValue,
    ipManagementTunnelDHCPv6Enabled       TruthValue,
    ipManagementTunnelIpv6Address         Ipv6Address,
    ipManagementTunnelIpv6AddrPrefixLen   Integer32,
    ipManagementTunnelIpv6StateAddrAutoConfigEnabled  TruthValue,
    ipManagementTunnellinkLocIpv6Addr                 Ipv6Address,
    ipManagementTunnellinkLocIpv6AddrPrefixLen        Integer32,
    ipManagementTunnelIpv6PrefixAdvertiseEnabled      TruthValue,
    ipManagementTunnelIpv6Prefix                      Ipv6Address,
    ipManagementTunnelIpv6PrefixLen                   Integer32,
    ipManagementTunnelIpMode                          IpMode,
    ipManagementTunnelIpv6RipngEnabled                TruthValue,
    ipManagementTunnelDhcpClassIdEnabled              TruthValue,
    ipManagementTunnelDhcpHostNameEnabled             TruthValue,
    ipManagementTunnelDhcpHostName                    DisplayString,
    ipManagementTunnelDhcpLogServerEnabled            TruthValue,
    ipManagementTunnelDhcpNTPServerEnabled            TruthValue,
    ipManagementTunnelDhcpClientIdType                DHCPCIDType,
    ipManagementTunnelDhcpHostNameType                DHCPHostNameType,
    ipManagementTunnelDhcpVendorInfoEnabled           TruthValue,
    ipManagementTunnelDhcpVendorInfoType              DHCPVendorInfoType,
    ipManagementTunnelDhcpVendorInfo                  DisplayString,
    ipManagementTunnelDhcpVendorInfoHideControl       TruthValue,
    ipManagementTunnelSharedVim                       TruthValue
}

ipManagementTunnelIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "A unique integer index value used to uniquely identify
             a Management Tunnel Entry in the ipManagementTunnelTable."
    ::= { ipManagementTunnelEntry 1 }

ipManagementTunnelAssociatedPort OBJECT-TYPE
    SYNTAX      VariablePointer 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This allows specification of the associated physical port on the device,
             to which the Management Tunnel is attached."
    ::= { ipManagementTunnelEntry 2 }

ipManagementTunnelName OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This allows specification of a unique name which is also used as the name of the IP interface,
             to which the Management Tunnel is attached."
    ::= { ipManagementTunnelEntry 3 }

ipManagementTunnelType OBJECT-TYPE
    SYNTAX      IpManagementTunnelType 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This allows specification of the type of management tunnel, 
             whether it is a VLAN based tunnel or a MAC based tunnel."
    ::= { ipManagementTunnelEntry 4 }

ipManagementTunnelMTU OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This provides the MTU of the Management Tunnel." 
    ::= { ipManagementTunnelEntry 5 }

ipManagementTunnelEncapsulationType OBJECT-TYPE
    SYNTAX      IpManagementTunnelEncapsulationType 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This allows specification of the encapsulation type of management tunnel.
             Only Ethernet encapsulation is currently supported."
    ::= { ipManagementTunnelEntry 6 }

ipManagementTunnelIpAddress OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows configuration of the Management Tunnel IP Address."
     ::= { ipManagementTunnelEntry 7 }

ipManagementTunnelSubnetMask OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the Management Tunnel Subnet Mask."
     ::= { ipManagementTunnelEntry 8 }

ipManagementTunnelVlanId OBJECT-TYPE
    SYNTAX     VlanId
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the VLAN Id in the case of 
          a VLAN management tunnel.  This object is not relevant for a 
          MAC based management tunnel."
     ::= { ipManagementTunnelEntry 9 }

ipManagementTunnelSVlanEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of whether or not the S-TAG is enabled
          on the IP Management Tunnel. 
          This object is not relevant for a MAC based management tunnel."
     ::= { ipManagementTunnelEntry 10 }

ipManagementTunnelSVlanId OBJECT-TYPE
    SYNTAX     VlanId
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the S-TAG VLAN Id in the case of 
          a VLAN management tunnel, when S-TAG is also enabled.  
          This object is not relevant for a MAC based management tunnel,
          as well as when the ipManagementTunnelSVlanEnabled is set to false."
     ::= { ipManagementTunnelEntry 11 }

ipManagementTunnelDhcpEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of whether or not DHCP is enabled
          on the IP Management Tunnel." 
     ::= { ipManagementTunnelEntry 12 }

ipManagementTunnelRip2PktsEnabled OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of whether or not RIP2 is enabled
          on the IP Management Tunnel." 
     ::= { ipManagementTunnelEntry 13 }

ipManagementTunnelPhysicalAddress OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
         "This object provides the physical address (MAC Address) associated with the
          IP Management Tunnel."
     ::= { ipManagementTunnelEntry 14 }

ipManagementTunnelCOS OBJECT-TYPE
    SYNTAX     Integer32(0..7)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the Class of Service associated with the
          IP Management Tunnel. This value is also used in the p-bits of the VLAN
          based management tunnels (for both VLANs in case S-TAG is enabled)."
     ::= { ipManagementTunnelEntry 15 }

ipManagementTunnelCIR OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the Management Tunnel CIR."
     ::= { ipManagementTunnelEntry 16 }

ipManagementTunnelEIR OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the Management Tunnel EIR."
     ::= { ipManagementTunnelEntry 17 }

ipManagementTunnelBufferSize OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows specification of the Management Tunnel Buffer Size."
     ::= { ipManagementTunnelEntry 18 }

ipManagementTunnelStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { ipManagementTunnelEntry 19 }

ipManagementTunnelRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The ipManagementTunnelRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { ipManagementTunnelEntry 20 }

ipManagementTunnelDHCPClientIdEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object enables DHCP Option 61 on the Management Tunnel.  
        This object is only applicable when DHCP client is enabled."
    ::= { ipManagementTunnelEntry 21 }

ipManagementTunnelDHCPClientId OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object is applicable when ipManagementTunnelDHCPClientIdEnabled is
        set to TRUE.  It allows users to specify the DHCP Client Id as
        a DisplayString - instead of the MAC address."
    ::= { ipManagementTunnelEntry 22 }

ipManagementTunnelQosQueueProfile OBJECT-TYPE
    SYNTAX      VariablePointer
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable."
    ::= { ipManagementTunnelEntry 23 }
    
ipManagementTunnelCVlanEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object CTAG whether enabled, By default it is enabled."
    ::= { ipManagementTunnelEntry 24 }

ipManagementTunnelDHCPv6Enabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object DHCPv6 whether enabled, By default it is enabled."
    ::= { ipManagementTunnelEntry 25 }

ipManagementTunnelIpv6Address OBJECT-TYPE
    SYNTAX     Ipv6Address 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the unicast ipv6 address."
    ::= { ipManagementTunnelEntry 26 }

ipManagementTunnelIpv6AddrPrefixLen OBJECT-TYPE
    SYNTAX     Integer32 (0..128)
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the unicast ipv6 address prefix length."
    ::= { ipManagementTunnelEntry 27 }

ipManagementTunnelIpv6StateAddrAutoConfigEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object Ipv6StateAddrAutoConfig whether enabled, By default it is enabled."
    ::= { ipManagementTunnelEntry 28 }

ipManagementTunnellinkLocIpv6Addr OBJECT-TYPE
    SYNTAX     Ipv6Address 
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object means the link local ipv6 address."
    ::= { ipManagementTunnelEntry 29 }

ipManagementTunnellinkLocIpv6AddrPrefixLen OBJECT-TYPE
    SYNTAX     Integer32 (0..128)
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object means the link local ipv6 address prefix length."
    ::= { ipManagementTunnelEntry 30 }

ipManagementTunnelIpv6PrefixAdvertiseEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the prefix advertise whether enabled."
    ::= { ipManagementTunnelEntry 31 }

ipManagementTunnelIpv6Prefix OBJECT-TYPE
    SYNTAX     Ipv6Address 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the prefix ipv6 address."
    ::= { ipManagementTunnelEntry 32 }

ipManagementTunnelIpv6PrefixLen OBJECT-TYPE
    SYNTAX     Integer32 (0..128)
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the link local ipv6 address prefix length."
    ::= { ipManagementTunnelEntry 33 }

ipManagementTunnelIpMode OBJECT-TYPE
    SYNTAX     IpMode 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the ip mode for the management tunnel."
    ::= { ipManagementTunnelEntry 34 }

ipManagementTunnelIpv6RipngEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the ipv6's Ripng whether enabled."
    ::= { ipManagementTunnelEntry 35 }

ipManagementTunnelDhcpClassIdEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the class id whether enabled."
    ::= { ipManagementTunnelEntry 36 }

ipManagementTunnelDhcpHostNameEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the host name whether enabled."
    ::= { ipManagementTunnelEntry 37 }

ipManagementTunnelDhcpHostName OBJECT-TYPE
    SYNTAX     DisplayString 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the host name."
    ::= { ipManagementTunnelEntry 38 }

ipManagementTunnelDhcpLogServerEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp log server enabled."
    ::= { ipManagementTunnelEntry 39 }

ipManagementTunnelDhcpNTPServerEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp ntp server enabled."
    ::= { ipManagementTunnelEntry 40 }

ipManagementTunnelDhcpClientIdType OBJECT-TYPE
    SYNTAX  DHCPCIDType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp cid type."
    ::= { ipManagementTunnelEntry 41 }

ipManagementTunnelDhcpHostNameType OBJECT-TYPE
    SYNTAX  DHCPHostNameType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp host name type."
    ::= { ipManagementTunnelEntry 42 }

ipManagementTunnelDhcpVendorInfoEnabled OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the vendor information whether enabled."
    ::= { ipManagementTunnelEntry 43 }

ipManagementTunnelDhcpVendorInfoType OBJECT-TYPE
    SYNTAX  DHCPVendorInfoType
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp vendor information type."
    ::= { ipManagementTunnelEntry 44 }

ipManagementTunnelDhcpVendorInfo OBJECT-TYPE
    SYNTAX     DisplayString 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the vendor information."
    ::= { ipManagementTunnelEntry 45 }

ipManagementTunnelDhcpVendorInfoHideControl OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether the dhcp vendor info is hidden or not."
    ::= { ipManagementTunnelEntry 46 }

ipManagementTunnelSharedVim OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describes if tunnel share vlan with vim tunnel."
    ::= { ipManagementTunnelEntry 47 }

cmIpv6InterfaceTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF CmIpv6InterfaceEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "User managed IPv6 Address Table." 
    ::= { cmIpObjects 6 }

cmIpv6InterfaceEntry OBJECT-TYPE
    SYNTAX   CmIpv6InterfaceEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "Allows management of IPv6 Interfaces."
    AUGMENTS { cmIpInterfaceEntry }
    ::= { cmIpv6InterfaceTable 1 }

CmIpv6InterfaceEntry ::= SEQUENCE {
        cmIpv6InterfaceMTU                 Integer32,
        cmIpv6UnicastAddr                  Ipv6Address,
        cmIpv6UnicastAddrPrefixLen         Integer32,
        cmIpv6PrefixAdvertiseEnabled       TruthValue,
        cmIpv6RAPrefix                     Ipv6Address,
        cmIpv6RAPrefixLength               Integer32,
        cmIpv6StateAddrAutoConfigEnabled   TruthValue,
        cmIpv6DhcpEnabled                  TruthValue,
        cmIpv6DhcpRole                     CmDhcpRole,
        cmIpv6RIPngEnabled                 TruthValue,
        cmIpv6LinkLocAddr                  Ipv6Address,
        cmIpv6LinkLocAddrPrefixLen         Integer32,
        cmIpv6InterfaceGateway             Ipv6Address
    }

cmIpv6InterfaceMTU OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the MTU for ipv6 address interface."
    ::= { cmIpv6InterfaceEntry 1 }

cmIpv6UnicastAddr OBJECT-TYPE
    SYNTAX  Ipv6Address
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe IPv6 Unicast Address together with Prefix."
    ::= { cmIpv6InterfaceEntry 2 }

cmIpv6UnicastAddrPrefixLen OBJECT-TYPE
    SYNTAX  Integer32 (0..128)
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe prefix length of unicast address."
    ::= { cmIpv6InterfaceEntry 3 }

cmIpv6PrefixAdvertiseEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether to advertise prefix to link in router mode."
    ::= { cmIpv6InterfaceEntry 4 }

cmIpv6RAPrefix OBJECT-TYPE
    SYNTAX  Ipv6Address
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the IPv6 Prefix to be dispatched to link in Router mode."
    ::= { cmIpv6InterfaceEntry 5 }

cmIpv6RAPrefixLength OBJECT-TYPE
    SYNTAX  Integer32 (0..128)
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe Length of RA prefix."
    ::= { cmIpv6InterfaceEntry 6 }

cmIpv6StateAddrAutoConfigEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether enable or disable stateless 
       address auto configuration."
    ::= { cmIpv6InterfaceEntry 7 }

cmIpv6DhcpEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe whether dhcp is enabled on the ipv6 interface."
    ::= { cmIpv6InterfaceEntry 8 }

cmIpv6DhcpRole OBJECT-TYPE
    SYNTAX  CmDhcpRole
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe the dhcp role."
    ::= { cmIpv6InterfaceEntry 9 }

cmIpv6RIPngEnabled OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describe RIPng whether enabled."
    ::= { cmIpv6InterfaceEntry 10 }

cmIpv6LinkLocAddr OBJECT-TYPE
    SYNTAX  Ipv6Address
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object describe Automatically generated Link-local Address."
    ::= { cmIpv6InterfaceEntry 11}

cmIpv6LinkLocAddrPrefixLen OBJECT-TYPE
    SYNTAX  Integer32 (0..128)
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
       "This object describe Length of link local IPv6 address prefix."
    ::= { cmIpv6InterfaceEntry 12 }

cmIpv6InterfaceGateway OBJECT-TYPE
    SYNTAX  Ipv6Address
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object describes the IPv6 Gateway address for the management interface on OSA540X."
    ::= { cmIpv6InterfaceEntry 13 }

--  FSP150 CM IPv6 Static Routes Configuration Table
cmIpv6StaticRouteTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF CmIpv6StaticRouteEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "This entity's user configured Static Ipv6 Routing table."
    ::= { cmIpObjects 7 }

cmIpv6StaticRouteEntry OBJECT-TYPE
    SYNTAX   CmIpv6StaticRouteEntry
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "A particular route to  a  particular  destina-
       tion, under a particular policy."
    INDEX {
        cmIpv6StaticRouteDest,
        cmIpv6StaticRoutePrefixLen,
        cmIpv6StaticRouteNextHop,
        cmIpv6StaticRouteInterface
        }
    ::= { cmIpv6StaticRouteTable 1 }

CmIpv6StaticRouteEntry ::= SEQUENCE {
        cmIpv6StaticRouteDest        Ipv6Address,
        cmIpv6StaticRoutePrefixLen   Integer32,
        cmIpv6StaticRouteNextHop     Ipv6Address,
        cmIpv6StaticRouteMetric      Integer32,
        cmIpv6StaticRouteRowStatus   RowStatus,
        cmIpv6StaticRouteInterface   DisplayString,
        cmIpv6StaticRouteAdvertise   TruthValue
    }

cmIpv6StaticRouteDest OBJECT-TYPE
    SYNTAX   Ipv6Address
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "The destination Ipv6 address of this route.
       This object may not take a Multicast (Class  D)
       address value.
       Any assignment (implicit or  otherwise)  of  an
       instance  of  this  object to a value x must be
       rejected if the bitwise logical-AND of  x  with
       the  value of the corresponding instance of the
       cmIpv6StaticRouteMask object is not equal to x."
    ::= { cmIpv6StaticRouteEntry 1 }

cmIpv6StaticRoutePrefixLen OBJECT-TYPE
    SYNTAX   Integer32 (0..128)
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "Indicate the mask to be logical-ANDed with the
       destination  address  before  being compared to
       the value  in  the  cmIpv6StaticRouteDest  field.   For
       those  systems  that  do  not support arbitrary
       subnet masks, an agent constructs the value  of
       the  cmIpv6StaticRoutePrefixLen  by  reference to the IP Ad-
       dress Class.
       Any assignment (implicit or  otherwise)  of  an
       instance  of  this  object to a value x must be
       rejected if the bitwise logical-AND of  x  with
       the  value of the corresponding instance of the
       cmIpv6StaticRouteDest object is not equal to
       cmIpv6StaticRouteDest."
    ::= { cmIpv6StaticRouteEntry 2 }

cmIpv6StaticRouteNextHop OBJECT-TYPE
    SYNTAX   Ipv6Address
    MAX-ACCESS not-accessible
    STATUS   current
    DESCRIPTION
       "On remote routes, the address of the next sys-
       tem en route; Otherwise, 0.0.0.0."
    ::= { cmIpv6StaticRouteEntry 3 }

cmIpv6StaticRouteMetric OBJECT-TYPE
    SYNTAX   Integer32 (0..65535)
    MAX-ACCESS read-create
    STATUS   current
    DESCRIPTION
       "The primary routing  metric  for  this  route.
       The  semantics of this metric are determined by
       the routing-protocol specified in  the  route's
       cmIpv6StaticRouteProto  value.   If  this metric is not
       used, its value should be set to 1."
    DEFVAL { 1 }
    ::= { cmIpv6StaticRouteEntry 4 }

cmIpv6StaticRouteRowStatus OBJECT-TYPE
    SYNTAX   RowStatus
    MAX-ACCESS read-create
    STATUS   current
    DESCRIPTION
       "The row status variable, used according to
       row installation and removal conventions."
    ::= { cmIpv6StaticRouteEntry 5 }

cmIpv6StaticRouteInterface   OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..15))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "Name of the Ipv6 interface for the interface static route."
    ::= { cmIpv6StaticRouteEntry 6 }

cmIpv6StaticRouteAdvertise   OBJECT-TYPE
    SYNTAX     TruthValue 
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
       "Whether this static route will be advertised via routing protocol."
    ::= { cmIpv6StaticRouteEntry 7 }

--
-- FSP150 CM IPV6 NDP Table
--
cmNDPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CmNDPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of NDP entries on the NIDs."
    ::= { cmIpObjects 8 }

cmNDPEntry  OBJECT-TYPE
    SYNTAX      CmNDPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the cmNDPTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { cmNDPInterface, cmNDPIpv6Address }
    ::= { cmNDPTable 1 }

CmNDPEntry ::= SEQUENCE {
    cmNDPIpv6Address    Ipv6Address,
    cmNDPMacAddress     MacAddress,
    cmNDPInterface      DisplayString,
    cmNDPStorageType    StorageType,
    cmNDPRowStatus      RowStatus,
    cmNDPEntryType      IpEntryType 
}

cmNDPIpv6Address OBJECT-TYPE
    SYNTAX     Ipv6Address
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "This object allows configuration of the NDP Entry IP Address."
     ::= { cmNDPEntry 1 }

cmNDPMacAddress OBJECT-TYPE
    SYNTAX     MacAddress
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the NDP Entry MAC Address."
     ::= { cmNDPEntry 2 }

cmNDPInterface OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..15))
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "This object allows management of the NDP Entry Interface."
     ::= { cmNDPEntry 3 }

cmNDPStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { cmNDPEntry 4 }

cmNDPRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The cmNDPRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { cmNDPEntry 5 }

cmNDPEntryType OBJECT-TYPE
    SYNTAX     IpEntryType
    MAX-ACCESS read-write 
    STATUS     current
    DESCRIPTION
            "The type of NDP Entry. Note that static entries can be created."
    ::= { cmNDPEntry 6 }

--
-- FSP150 CM Proxy NDP Table
--
cmProxyNDPTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CmProxyNDPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of Proxy NDP entries on the NIDs.  This table is not 
             supported in GE206 Release 4.1CC."
    ::= { cmIpObjects 9 }

cmProxyNDPEntry  OBJECT-TYPE
    SYNTAX      CmProxyNDPEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the cmProxyNDPTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { cmProxyNDPInterface, cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen }
    ::= { cmProxyNDPTable 1 }

CmProxyNDPEntry ::= SEQUENCE {
    cmProxyNDPIpv6Address   Ipv6Address,
    cmProxyNDPIpv6PrefixLen Integer32,
    cmProxyNDPInterface     DisplayString,
    cmProxyNDPStorageType   StorageType,
    cmProxyNDPRowStatus     RowStatus
}

cmProxyNDPIpv6Address OBJECT-TYPE
    SYNTAX     Ipv6Address
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "This object allows configuration of the ProxyNDP Entry IP Address."
     ::= { cmProxyNDPEntry 1 }

cmProxyNDPIpv6PrefixLen OBJECT-TYPE
    SYNTAX     Integer32 (0..128)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "This object allows management of the Proxy NDP Entry Subnet Mask."
     ::= { cmProxyNDPEntry 2 }

cmProxyNDPInterface OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..15))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
         "This object allows management of the Proxy NDP Entry Interface."
     ::= { cmProxyNDPEntry 3 }

cmProxyNDPStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { cmProxyNDPEntry 4 }

cmProxyNDPRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The cmProxyNDPRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { cmProxyNDPEntry 5 }

--
-- FSP150 CM IPV6 OVER IPV4 TUNNEL Table
--
cmIpv6OverIpv4TunnelTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CmIpv6OverIpv4TunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of Ipv6OverIpv4Tunnel entries on the NIDs."
    ::= { cmIpObjects 10 }

cmIpv6OverIpv4TunnelEntry  OBJECT-TYPE
    SYNTAX      CmIpv6OverIpv4TunnelEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the cmIpv6OverIpv4TunnelTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { cmIpv6OverIpv4TunnelIndex }
    ::= { cmIpv6OverIpv4TunnelTable 1 }

CmIpv6OverIpv4TunnelEntry ::= SEQUENCE {
    cmIpv6OverIpv4TunnelIndex                     Integer32,
    cmIpv6OverIpv4TunnelName                      DisplayString,
    cmIpv6OverIpv4TunnelType                      Ipv6OverIpv4TunnelType,
    cmIpv6OverIpv4TunnelDestIpv4Addr              IpAddress,
    cmIpv6OverIpv4TunnelIpv6UnicastAddress        Ipv6Address,
    cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen  Integer32,
    cmIpv6OverIpv4TunnelLinkLocalAddress          Ipv6Address,
    cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen    Integer32,
    cmIpv6OverIpv4TunnelAssociatedIpv4Interface   VariablePointer,
    cmIpv6OverIpv4TunnelStorageType               StorageType,
    cmIpv6OverIpv4TunnelRowStatus                 RowStatus,
    cmIpv6OverIpv4PotentialRouterList             DisplayString
}

cmIpv6OverIpv4TunnelIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "An integer index value used to uniquely identify
             this Ipv6OverIpv4TunnelEntry in the cmIpv6OverIpv4TunnelTable."
    ::= { cmIpv6OverIpv4TunnelEntry 1 }

cmIpv6OverIpv4TunnelName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..15))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object describe the tunnel name."
    ::= { cmIpv6OverIpv4TunnelEntry 2 }

cmIpv6OverIpv4TunnelType OBJECT-TYPE
    SYNTAX      Ipv6OverIpv4TunnelType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object describe the tunnel type."
    ::= { cmIpv6OverIpv4TunnelEntry 3 }

cmIpv6OverIpv4TunnelDestIpv4Addr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object describe Destination IPv4 address.
             Only applicable for configured tunnel."
    ::= { cmIpv6OverIpv4TunnelEntry 4 }

cmIpv6OverIpv4TunnelIpv6UnicastAddress OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object describe Source IPv6 address used to transmit 
            IPv6 packets on tunnel. Only writable for Configured Tunnel, 
            read-only for other types of Tunnels."
    ::= { cmIpv6OverIpv4TunnelEntry 5 }

cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen OBJECT-TYPE
    SYNTAX      Integer32 (0..128)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This object describe the prefix length for the unicast ipv6 address."
    ::= { cmIpv6OverIpv4TunnelEntry 6 }

cmIpv6OverIpv4TunnelLinkLocalAddress OBJECT-TYPE
    SYNTAX      Ipv6Address
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This object describe the link local adderss."
    ::= { cmIpv6OverIpv4TunnelEntry 7 }

cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This object describe the prefix length for link local address."
    ::= { cmIpv6OverIpv4TunnelEntry 8 }

cmIpv6OverIpv4TunnelAssociatedIpv4Interface OBJECT-TYPE
    SYNTAX      VariablePointer
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "the IPv4 Interface that Tunnel is created on, 
            which could be DCN or Management tunnel."
    ::= { cmIpv6OverIpv4TunnelEntry 9 }

cmIpv6OverIpv4TunnelStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { cmIpv6OverIpv4TunnelEntry 10 }

cmIpv6OverIpv4TunnelRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The status of this row.
             The cmIpv6OverIpv4TunnelRowStatus object may be modified if
             the associated instance of this object is equal to active(1),
             notInService(2), or notReady(3)."
    ::= { cmIpv6OverIpv4TunnelEntry 11 }

cmIpv6OverIpv4PotentialRouterList OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This object describe the potential router list. 
            And its format should be like 'a.b.c.d,e.f.g.h', split by ',' and no breakspace there."
    ::= { cmIpv6OverIpv4TunnelEntry 12 }


--
-- FSP150 IP loopback interface Table
--
ipLoopbackInterfaceTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF IpLoopbackInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of loopback interace entries in the management plane."
    ::= { cmIpObjects 11 }

ipLoopbackInterfaceEntry  OBJECT-TYPE
    SYNTAX      IpLoopbackInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the ipLoopbackInterfaceTable. Entries can
            be created/deleted in this table by management application action."
    INDEX { ipLoopbackInterfaceIndex } 
    ::= { ipLoopbackInterfaceTable 1 }

IpLoopbackInterfaceEntry ::= SEQUENCE {
    ipLoopbackInterfaceIndex           Integer32,
    ipLoopbackInterfaceName            DisplayString,
    ipLoopbackInterfaceIpAddress       IpAddress,
    ipLoopbackInterfaceMask            IpAddress,
    ipLoopbackInterfaceStorageType     StorageType,
    ipLoopbackInterfaceRowStatus       RowStatus,
    ipLoopbackInterfaceIpMode          IpMode,
    ipLoopbackInterfaceIpv6Address     Ipv6Address,
    ipLoopbackInterfaceIpv6AddrPrefixLen Integer32
}

ipLoopbackInterfaceIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A unique integer index value used to uniquely identify
             a Loopback Interface Entry in the ipLoopbackInterfaceTable."
    ::= { ipLoopbackInterfaceEntry 1 }

ipLoopbackInterfaceName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This allows specification of a unique name which is also used as the name of the IP interface."
    ::= { ipLoopbackInterfaceEntry 2 }

ipLoopbackInterfaceIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IP Address of the interface."
        
    ::= { ipLoopbackInterfaceEntry 3 }

ipLoopbackInterfaceMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object allows user to specify the IP mask of the interface."        
    ::= { ipLoopbackInterfaceEntry 4 }

ipLoopbackInterfaceStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { ipLoopbackInterfaceEntry 5 }

ipLoopbackInterfaceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
           "The status of this row.
            An entry MUST NOT exist in the active state unless all
            objects in the entry have an appropriate value, as described
            in the description clause for each writable object.

            The values of ipLoopbackInterfaceRowStatus supported are
            createAndGo(4) and destroy(6).  All mandatory attributes
            must be specified in a single SNMP SET request with
            ipLoopbackInterfaceRowStatus value as createAndGo(4).
            Upon successful row creation, this object has a
            value of active(1).

            The ipLoopbackInterfaceRowStatus object may be modified if
            the associated instance of this object is equal to active(1)."

    ::= { ipLoopbackInterfaceEntry 6 }

ipLoopbackInterfaceIpMode OBJECT-TYPE
    SYNTAX     IpMode 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the ip mode for the interface."
    ::= { ipLoopbackInterfaceEntry 7 }

ipLoopbackInterfaceIpv6Address OBJECT-TYPE
    SYNTAX     Ipv6Address 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the ipv6 address for the interface."
    ::= { ipLoopbackInterfaceEntry 8 }

ipLoopbackInterfaceIpv6AddrPrefixLen OBJECT-TYPE
    SYNTAX     Integer32 
    MAX-ACCESS read-write
    STATUS   current
    DESCRIPTION
       "This object means the ipv6 address prefix length for the interface."
    ::= { ipLoopbackInterfaceEntry 9 }


--
-- Conformance Section
--
ipCompliances OBJECT IDENTIFIER ::= { cmIpConformance 1 }
ipGroups      OBJECT IDENTIFIER ::= { cmIpConformance 2 }

ipCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for compliance to the IP Module."
    MODULE  -- this module
        MANDATORY-GROUPS {
              ipGroup
        }
    ::= { ipCompliances 1 }

ipGroup OBJECT-GROUP
    OBJECTS {
        cmIpFlushARPCacheAction, cmIpProxyARPEnabled,
        cmIpPingDestination, cmIpInitiatePingAction, 
        cmIpPingResult, cmPingInterface, 
        cmIpTraceRouteDestination, cmIpInitiateTraceRouteAction, 
        cmIpTraceRouteResult, cmIpTraceRouteInterface,
        cmIpSNMPv1InterfaceName,
        cmIpSourceAddressType, cmIpSourceAddressInterfaceName,
        cmIpManagementTrafficBridgingEnabled,
        cmIpManagementTrafficBridgingSecurityEnabled,

        cmIpInterfaceName, cmIpInterface, cmIpInterfaceMask,
        cmIpInterfaceDhcpEnabled, cmIpInterfaceMTU, cmIpInterfaceDhcpRole,
        cmIpInterfacePhysicalAddress, cmIpInterfaceRIPv2Enabled,
        cmIpInterfaceDHCPClientIdEnabled, cmIpInterfaceDHCPClientId,
        cmIpInterfaceIpMode,

        cmIpInterfaceDhcpClassIdEnabled,
        cmIpInterfaceDhcpHostNameEnabled,
        cmIpInterfaceDhcpHostName,
        cmIpInterfaceDhcpLogServerEnabled,
        cmIpInterfaceDhcpNTPServerEnabled,
        cmIpInterfaceDhcpClientIdType,
        cmIpInterfaceDhcpHostNameType,
        cmIpInterfaceDhcpVendorInfoEnabled,
        cmIpInterfaceDhcpVendorInfoType,
        cmIpInterfaceDhcpVendorInfo,
        cmIpInterfaceDhcpVendorInfoHideControl,
        cmIpInterfaceGateway,

        cmStaticRouteDest, cmStaticRouteMask,
        cmStaticRouteNextHop, cmStaticRouteMetric,
        cmStaticRouteRowStatus, cmStaticRouteInterface, cmStaticRouteAdvertise,
        cmARPIndex, cmARPIPAddress,
        cmARPMacAddress, cmARPInterface, cmARPStorageType,
        cmARPRowStatus, cmARPEntryType,
        cmProxyARPIndex, cmProxyARPIPAddress,
        cmProxyARPSubnetMask, cmProxyARPInterface,
        cmProxyARPStorageType, cmProxyARPRowStatus,

        ipManagementTunnelIndex, ipManagementTunnelAssociatedPort,
        ipManagementTunnelName, ipManagementTunnelType, 
        ipManagementTunnelMTU,
        ipManagementTunnelEncapsulationType, ipManagementTunnelIpAddress,
        ipManagementTunnelSubnetMask, ipManagementTunnelVlanId,
        ipManagementTunnelSVlanEnabled, ipManagementTunnelSVlanId,
        ipManagementTunnelDhcpEnabled, ipManagementTunnelRip2PktsEnabled,
        ipManagementTunnelPhysicalAddress, ipManagementTunnelCOS,
        ipManagementTunnelCIR, ipManagementTunnelEIR,
        ipManagementTunnelBufferSize, ipManagementTunnelStorageType,
        ipManagementTunnelRowStatus, ipManagementTunnelQosQueueProfile,
        ipManagementTunnelDHCPClientIdEnabled, ipManagementTunnelDHCPClientId,
        ipManagementTunnelCVlanEnabled, ipManagementTunnelIpMode,
     
        ipManagementTunnelDhcpClassIdEnabled,
        ipManagementTunnelDhcpHostNameEnabled,
        ipManagementTunnelDhcpHostName,
        ipManagementTunnelDhcpLogServerEnabled,
        ipManagementTunnelDhcpNTPServerEnabled,
        ipManagementTunnelDhcpClientIdType,
        ipManagementTunnelDhcpHostNameType,

        cmIpManagementTrafficDscpEnabled,
        cmIpManagementTrafficDscp,
        cmIpManagementTrafficBridgingInterface,
        cmIpManagementTrafficBridgingIpv4Gateway,
        cmIpManagementTrafficBridgingIpv6Gateway,
        ipManagementTunnelDhcpVendorInfoEnabled,
        ipManagementTunnelDhcpVendorInfoType,
        ipManagementTunnelDhcpVendorInfo,
        ipManagementTunnelDhcpVendorInfoHideControl,
        ipManagementTunnelSharedVim
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects used to manage the FSP150CM IP Services."
    ::= { ipGroups 1 }

ipv6Group OBJECT-GROUP
    OBJECTS {
        ipManagementTunnelDHCPv6Enabled,
        ipManagementTunnelIpv6Address,
        ipManagementTunnelIpv6AddrPrefixLen,
        ipManagementTunnelIpv6StateAddrAutoConfigEnabled,
        ipManagementTunnellinkLocIpv6Addr,
        ipManagementTunnellinkLocIpv6AddrPrefixLen,
        ipManagementTunnelIpv6PrefixAdvertiseEnabled,
        ipManagementTunnelIpv6Prefix,
        ipManagementTunnelIpv6PrefixLen,
        ipManagementTunnelIpv6RipngEnabled,
        cmIpv6InterfaceMTU, cmIpv6UnicastAddr, cmIpv6UnicastAddrPrefixLen,
        cmIpv6PrefixAdvertiseEnabled, cmIpv6RAPrefix,
        cmIpv6RAPrefixLength, cmIpv6StateAddrAutoConfigEnabled,
        cmIpv6DhcpEnabled, cmIpv6DhcpRole,
        cmIpv6RIPngEnabled, cmIpv6LinkLocAddr,
        cmIpv6LinkLocAddrPrefixLen, cmIpv6InterfaceGateway, cmIpv6StaticRouteDest,
        cmIpv6StaticRoutePrefixLen, cmIpv6StaticRouteNextHop,
        cmIpv6StaticRouteMetric, cmIpv6StaticRouteRowStatus,
        cmIpv6StaticRouteInterface, cmIpv6StaticRouteAdvertise,
        cmNDPIpv6Address, cmNDPMacAddress,
        cmNDPInterface, cmNDPStorageType,
        cmNDPRowStatus, cmNDPEntryType,
        cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen,
        cmProxyNDPInterface, cmProxyNDPStorageType,
        cmProxyNDPRowStatus, cmIpv6OverIpv4TunnelIndex,
        cmIpv6OverIpv4TunnelName, cmIpv6OverIpv4TunnelType,
        cmIpv6OverIpv4TunnelDestIpv4Addr,
        cmIpv6OverIpv4TunnelIpv6UnicastAddress,
        cmIpv6OverIpv4TunnelAssociatedIpv4Interface,
        cmIpv6OverIpv4TunnelStorageType,
        cmIpv6OverIpv4TunnelRowStatus, cmIpv6InitiatePingAction,        
        cmIpv6InitiatePingAction, cmIpv6TraceRouteDestination,
        cmIpv6InitiateTraceRouteAction, cmIpv6PingInterface,
        cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen,
        cmIpv6OverIpv4TunnelLinkLocalAddress,
        cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen,
        cmIpv6OverIpv4PotentialRouterList, cmIpv6FwdEnabled,
        cmIpv6ProxyNDPEnabled, cmIpFlushNDPCacheAction, cmIpPtpArpRtrvAction,
        ipLoopbackInterfaceIndex,ipLoopbackInterfaceName,ipLoopbackInterfaceIpAddress,
        ipLoopbackInterfaceMask,ipLoopbackInterfaceStorageType,ipLoopbackInterfaceRowStatus,
        ipLoopbackInterfaceIpMode,ipLoopbackInterfaceIpv6Address,
        ipLoopbackInterfaceIpv6AddrPrefixLen
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects used to manage the FSP150CM IPv6 Services."
    ::= { ipGroups 2 }

END