mibs/MIBS/adva/CM-IP-MIB
2023-12-05 12:25:34 +01:00

2303 lines
75 KiB
Plaintext

CM-IP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress, RowStatus, StorageType, DisplayString, VariablePointer,
TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
VlanId, IpVersion
FROM CM-COMMON-MIB
Ipv6Address
FROM IPV6-TC
fsp150cm
FROM ADVA-MIB;
cmIPMIB MODULE-IDENTITY
LAST-UPDATED "201903140000Z"
ORGANIZATION "ADVA Optical Networking SE"
CONTACT-INFO
"Web URL: http://adva.com/
E-mail: support@adva.com
Postal: ADVA Optical Networking SE
Campus Martinsried
Fraunhoferstrasse 9a
82152 Martinsried/Munich
Germany
Phone: +49 089 89 06 65 0
Fax: +49 089 89 06 65 199 "
DESCRIPTION
"This module defines the IP MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA."
REVISION "201903140000Z"
DESCRIPTION
"
Notes from release 201903140000Z
(1) Added cmIpInterfaceGateway to cmIpInterfaceTable
(2) Added cmIpv6InterfaceGateway to cmIpv6InterfaceTable
Notes from release 201904050000Z
(1) chaned cmStaticRouteNextHop to RO
(2) chaned cmIpv6StaticRouteNextHop to RO
Notes from release 201902030000Z
(1) added cmIpTraceRouteInterface
(2) added cmIpv6TraceRouteInterface
Notes from release 201901300000Z
(1) added cmPingInterface
Notes from release 201901070000Z
(1) Modified cmStaticRouteNextHop: MAX-ACCESS read-write instead read-only
(2) Modified cmIpv6StaticRouteNextHop: MAX-ACCESS read-write instead not-accessible
Notes from release 201802130000Z
(1) added ipLoopbackInterfaceTable
Notes from release 201802020000Z,
(1) Added cmIpInterfaceDhcpVendorInfoHideControl to cmIpInterfaceTable
(2) Added ipManagementTunnelDhcpVendorInfoHideControl to ipManagementTunnelTable
Notes from release 201407180000Z,
(1) Added new IpManagementTunnelType literals:
- gcc0based,
- gcc1based,
- gcc2based.
Notes from release 201012080000Z,
(1)Added cmIpManagementTrafficBridgingSecurityEnabled scalar
for the Bridged Management LAN feature on GE20x devices
for Release 5.1CC.
Notes from release 201010230000Z,
(1)Added cmIpManagementTrafficBridgingEnabled scalar
for the Bridged Management LAN feature on GE20x devices
for Release 5.1CC.
Notes from release 200904200000Z,
(1)MIB version ready for release FSP150CC 4.1.
(a)Added new table IpManagementTunnel
(b)Added attribute cmIpInterfaceRIPv2Enabled
(c)Added attribute cmARPEntryType
(d)Added attribute cmStaticRouteInterface, cmStaticRouteAdvertise
Notes from release 200803030000Z,
(1)MIB version ready for release FSP150CM 3.1."
::= {fsp150cm 11}
--
-- OID definitions
--
cmIpObjects OBJECT IDENTIFIER ::= {cmIPMIB 1}
cmIpConformance OBJECT IDENTIFIER ::= {cmIPMIB 2}
cmIpScalars OBJECT IDENTIFIER ::= {cmIPMIB 3}
--
-- Textual Conventions
--
CmDhcpRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP role when DHCP is enabled on an interface."
SYNTAX INTEGER {
dhcp-client(1),
dhcp-server(2)
}
IpManagementTunnelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IP Management Tunnel type."
SYNTAX INTEGER {
macbased(1),
vlanbased(2),
itagbased(3),
gcc0based(4),
gcc1based(5),
gcc2based(6)
}
IpManagementTunnelEncapsulationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IP Management Tunnel Encapsulation type."
SYNTAX INTEGER {
ethernet(1),
ppp(2)
}
IpEntryType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IP Entry type."
SYNTAX INTEGER {
static(1),
dynamic(2)
}
IpSourceAddrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"IP Source Address type."
SYNTAX INTEGER {
systemipaddr(1),
outipinterfaceaddr(2)
}
IpActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"."
SYNTAX INTEGER {
not-applicable(0),
initiate (1)
}
Ipv6OverIpv4TunnelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"include four types."
SYNTAX INTEGER {
sixToFour (1),
ipv4-compatible (2),
isatap (3),
static-config (4),
gre (5),
ipv6-6rd (6)
}
IpMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"include 3 types."
SYNTAX INTEGER {
ipv4-only (0),
ipv6-only (1),
ipv4-and-ipv6(2)
}
DHCPCIDType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP Client ID Type."
SYNTAX INTEGER {
notApplicable(1),
sysName(2),
macAddr(3),
userDefined(4),
serialNumber(5)
}
DHCPHostNameType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP Hostname Type."
SYNTAX INTEGER {
notApplicable(1),
sysName(2),
userDefined(3)
}
PtpArpActionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"."
SYNTAX INTEGER {
not-applicable(0),
retrieve (1)
}
DHCPVendorInfoType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"DHCP Vendor Info Type."
SYNTAX INTEGER {
notApplicable(1),
sysName(2),
userDefined(3)
}
-- Scalars
cmIpSystemScalars OBJECT IDENTIFIER ::= {cmIpScalars 1}
cmIpSourceAddrScalars OBJECT IDENTIFIER ::= {cmIpScalars 2}
cmIpFlushARPCacheAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate Flush ARP action."
::= { cmIpSystemScalars 1 }
cmIpProxyARPEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to enable/disable Proxy ARP."
::= { cmIpSystemScalars 2 }
cmIpPingDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP Address to which
ICMP Ping will be initiated."
::= { cmIpSystemScalars 3 }
cmIpInitiatePingAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate ICMP Ping on cmIpPingDestination."
::= { cmIpSystemScalars 4 }
cmIpPingResult OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the results of a previous ICMP Ping Action."
::= { cmIpSystemScalars 5 }
cmIpTraceRouteDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP Address to which
Trace Route will be initiated."
::= { cmIpSystemScalars 6 }
cmIpInitiateTraceRouteAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate TraceRoute
on cmIpTraceRouteDestination."
::= { cmIpSystemScalars 7 }
cmIpTraceRouteResult OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the results of a previous TraceRoute Action."
::= { cmIpSystemScalars 8 }
cmIpManagementTrafficBridgingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to control the IP Management Traffic
Bridging feature. When enabled, the system is managed using the
IP address specified at the Management LAN port. All IP packets
that are not terminated at the node will be bridged over the
Management LAN."
::= { cmIpSystemScalars 9 }
cmIpManagementTrafficBridgingSecurityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to control the IP Management Traffic
Bridging feature's security. When enables, the system supports
a secure Management Traffic Bridge."
::= { cmIpSystemScalars 10 }
cmIpv6PingInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV6 Address related interface."
::= { cmIpSystemScalars 11 }
cmIpv6PingDestination OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV6 Address to which
ICMP Ping will be initiated."
::= { cmIpSystemScalars 12 }
cmIpv6InitiatePingAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate ICMP Ping on cmIpv6PingDestination."
::= { cmIpSystemScalars 13 }
cmIpv6TraceRouteDestination OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV6 Address to which
Trace Route will be initiated."
::= { cmIpSystemScalars 14 }
cmIpv6InitiateTraceRouteAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate TraceRoute
on cmIpv6TraceRouteDestination."
::= { cmIpSystemScalars 15 }
cmIpv6ProxyNDPEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object whether enabled proxy NDP."
::= { cmIpSystemScalars 16 }
cmIpv6FwdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object whether NE works in router mode or host mode.
Forwarding enable:router mode, forwarding disable: host mode."
::= { cmIpSystemScalars 17 }
cmIpFlushNDPCacheAction OBJECT-TYPE
SYNTAX IpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to initiate Flush NDP action."
::= { cmIpSystemScalars 18 }
cmIpPtpArpRtrvAction OBJECT-TYPE
SYNTAX PtpArpActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If user want to get PTP arp from cmARPEntry, user need to configure this object first."
::= { cmIpSystemScalars 19 }
cmIpManagementTrafficDscpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls whether the DSCP value is modified for the transmitted
management traffic whether it is locally generated or routed."
::= { cmIpSystemScalars 20 }
cmIpManagementTrafficDscp OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the DSCP value and it is applicable when
cmIpManagementTrafficDscpEnabled is enabled."
::= { cmIpSystemScalars 21 }
cmIpManagementTrafficBridgingInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify the name of
the IP interface the IP address of which shall be used as the
IP address of the Management Bridge."
::= { cmIpSystemScalars 22 }
cmIpManagementTrafficBridgingIpv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify the IPv4 default gateway
for the Management Bridge."
::= { cmIpSystemScalars 23 }
cmIpManagementTrafficBridgingIpv6Gateway OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify the IPv6 default gateway
for the Management Bridge."
::= { cmIpSystemScalars 24 }
cmPingInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV4 Address related interface."
::= { cmIpSystemScalars 25 }
cmIpTraceRouteInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV4 Address related interface."
::= { cmIpSystemScalars 26 }
cmIpv6TraceRouteInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IPV6 Address related interface."
::= { cmIpSystemScalars 27 }
cmIpSNMPv1InterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify the IP interface name,
which will be used in the SNMPv1 TRAP PDUs as the Agent's IP Address."
::= { cmIpSourceAddrScalars 1 }
cmIpSourceAddressType OBJECT-TYPE
SYNTAX IpSourceAddrType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify whether the System IP
Address or the Outgoing IP Interface's Address should be used
in outgoing IP PDUs."
::= { cmIpSourceAddrScalars 2 }
cmIpSourceAddressInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to specify the IP interface name when
cmIpSourceAddressType is 'systemipaddr'. The IP Address associated
with the IP interface name is set as the source IP Address in
outgoing PDUs."
::= { cmIpSourceAddrScalars 3 }
-- FSP150 CM IP Interface Configuration Table
cmIpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmIpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User managed IP Address Table."
::= { cmIpObjects 1 }
cmIpInterfaceEntry OBJECT-TYPE
SYNTAX CmIpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Allows management of IP Interfaces."
INDEX { cmIpInterfaceName }
::= { cmIpInterfaceTable 1 }
CmIpInterfaceEntry ::= SEQUENCE {
cmIpInterfaceName DisplayString,
cmIpInterface IpAddress,
cmIpInterfaceMask IpAddress,
cmIpInterfaceDhcpEnabled TruthValue,
cmIpInterfaceMTU Integer32,
cmIpInterfaceDhcpRole CmDhcpRole,
cmIpInterfacePhysicalAddress DisplayString,
cmIpInterfaceRIPv2Enabled TruthValue,
cmIpInterfaceDHCPClientIdEnabled TruthValue,
cmIpInterfaceDHCPClientId DisplayString,
cmIpInterfaceIpMode IpMode,
cmIpInterfaceDhcpClassIdEnabled TruthValue,
cmIpInterfaceDhcpHostNameEnabled TruthValue,
cmIpInterfaceDhcpHostName DisplayString,
cmIpInterfaceDhcpLogServerEnabled TruthValue,
cmIpInterfaceDhcpNTPServerEnabled TruthValue,
cmIpInterfaceDhcpClientIdType DHCPCIDType,
cmIpInterfaceDhcpHostNameType DHCPHostNameType,
cmIpInterfaceDhcpVendorInfoEnabled TruthValue,
cmIpInterfaceDhcpVendorInfoType DHCPVendorInfoType,
cmIpInterfaceDhcpVendorInfo DisplayString,
cmIpInterfaceDhcpVendorInfoHideControl TruthValue,
cmIpInterfaceGateway IpAddress
}
cmIpInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the IP interface."
::= { cmIpInterfaceEntry 1 }
cmIpInterface OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of the interface."
::= { cmIpInterfaceEntry 2 }
cmIpInterfaceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Mask of the interface."
::= { cmIpInterfaceEntry 3 }
cmIpInterfaceDhcpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not DHCP is enabled on this interface."
::= { cmIpInterfaceEntry 4 }
cmIpInterfaceMTU OBJECT-TYPE
SYNTAX Integer32 (0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Interface MTU."
DEFVAL { 1 }
::= { cmIpInterfaceEntry 5 }
cmIpInterfaceDhcpRole OBJECT-TYPE
SYNTAX CmDhcpRole
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the DHCP role on this interface."
::= { cmIpInterfaceEntry 6 }
cmIpInterfacePhysicalAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Physical Address associated with the IP Address."
::= { cmIpInterfaceEntry 7 }
cmIpInterfaceRIPv2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows to enable/disable RIPv2 on the IP Interface."
::= { cmIpInterfaceEntry 8 }
cmIpInterfaceDHCPClientIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables DHCP Option 61 on the IP interface. This object
is only applicable when DHCP client is enabled."
::= { cmIpInterfaceEntry 9 }
cmIpInterfaceDHCPClientId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is applicable when cmIpInterfaceDHCPClientIdEnabled is
set to TRUE. It allows users to specify the DHCP Client Id as
a DisplayString - instead of the MAC address."
::= { cmIpInterfaceEntry 10 }
cmIpInterfaceIpMode OBJECT-TYPE
SYNTAX IpMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the ipmode for the interface."
::= { cmIpInterfaceEntry 11 }
cmIpInterfaceDhcpClassIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether class id editable enabled."
::= { cmIpInterfaceEntry 12 }
cmIpInterfaceDhcpHostNameEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether host name editable enabled."
::= { cmIpInterfaceEntry 13 }
cmIpInterfaceDhcpHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the host name."
::= { cmIpInterfaceEntry 14 }
cmIpInterfaceDhcpLogServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp log server enabled."
::= { cmIpInterfaceEntry 15 }
cmIpInterfaceDhcpNTPServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp ntp server enabled."
::= { cmIpInterfaceEntry 16 }
cmIpInterfaceDhcpClientIdType OBJECT-TYPE
SYNTAX DHCPCIDType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp cid type."
::= { cmIpInterfaceEntry 17 }
cmIpInterfaceDhcpHostNameType OBJECT-TYPE
SYNTAX DHCPHostNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp host name type."
::= { cmIpInterfaceEntry 18 }
cmIpInterfaceDhcpVendorInfoEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the vendor information whether enabled."
::= { cmIpInterfaceEntry 19 }
cmIpInterfaceDhcpVendorInfoType OBJECT-TYPE
SYNTAX DHCPVendorInfoType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp vendor information type."
::= { cmIpInterfaceEntry 20 }
cmIpInterfaceDhcpVendorInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the vendor information."
::= { cmIpInterfaceEntry 21 }
cmIpInterfaceDhcpVendorInfoHideControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp vendor info is hidden or not"
::= { cmIpInterfaceEntry 22 }
cmIpInterfaceGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object desribes the IPv4 Gateway Address of the management interface on OSA540X."
::= { cmIpInterfaceEntry 23 }
-- FSP150 CM Static Routes Configuration Table
cmStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's user configured Static IP Routing table."
::= { cmIpObjects 2 }
cmStaticRouteEntry OBJECT-TYPE
SYNTAX CmStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destina-
tion, under a particular policy."
INDEX {
cmStaticRouteDest,
cmStaticRouteMask,
cmStaticRouteNextHop,
cmStaticRouteInterface
}
::= { cmStaticRouteTable 1 }
CmStaticRouteEntry ::= SEQUENCE {
cmStaticRouteDest IpAddress,
cmStaticRouteMask IpAddress,
cmStaticRouteNextHop IpAddress,
cmStaticRouteMetric Integer32,
cmStaticRouteRowStatus RowStatus,
cmStaticRouteInterface DisplayString,
cmStaticRouteAdvertise TruthValue
}
cmStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
cmStaticRouteMask object is not equal to x."
::= { cmStaticRouteEntry 1 }
cmStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the cmStaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the cmStaticRouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
cmStaticRouteDest object is not equal to
cmStaticRouteDest."
::= { cmStaticRouteEntry 2 }
cmStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { cmStaticRouteEntry 3 }
cmStaticRouteMetric OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
cmStaticRouteProto value. If this metric is not
used, its value should be set to 1."
DEFVAL { 1 }
::= { cmStaticRouteEntry 4 }
cmStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { cmStaticRouteEntry 5 }
cmStaticRouteInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the IP interface for the interface static route."
::= { cmStaticRouteEntry 6 }
cmStaticRouteAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this static route will be advertised via routing protocol."
::= { cmStaticRouteEntry 7 }
--
-- FSP150 CM IP ARP Table
--
cmARPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ARP entries on the NIDs."
::= { cmIpObjects 3 }
cmARPEntry OBJECT-TYPE
SYNTAX CmARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cmARPTable. Entries can
be created/deleted in this table by management application action."
INDEX { cmARPInterface, cmARPIPAddress }
::= { cmARPTable 1 }
CmARPEntry ::= SEQUENCE {
cmARPIndex Integer32,
cmARPIPAddress IpAddress,
cmARPMacAddress MacAddress,
cmARPInterface DisplayString,
cmARPStorageType StorageType,
cmARPRowStatus RowStatus,
cmARPEntryType IpEntryType
}
cmARPIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"An integer index value used to uniquely identify
this ARP Entry in the cmARPTable."
::= { cmARPEntry 1 }
cmARPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows configuration of the ARP Entry IP Address."
::= { cmARPEntry 2 }
cmARPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the ARP Entry MAC Address."
::= { cmARPEntry 3 }
cmARPInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the ARP Entry Interface."
::= { cmARPEntry 4 }
cmARPStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { cmARPEntry 5 }
cmARPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The cmARPRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { cmARPEntry 6 }
cmARPEntryType OBJECT-TYPE
SYNTAX IpEntryType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of ARP Entry. Note that static entries can be created."
::= { cmARPEntry 7 }
--
-- FSP150 CM Proxy ARP Table
--
cmProxyARPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmProxyARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Proxy ARP entries on the NIDs. This table is not
supported in GE206 Release 4.1CC."
::= { cmIpObjects 4 }
cmProxyARPEntry OBJECT-TYPE
SYNTAX CmProxyARPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cmProxyARPTable. Entries can
be created/deleted in this table by management application action."
INDEX { cmProxyARPInterface, cmProxyARPIPAddress, cmProxyARPSubnetMask }
::= { cmProxyARPTable 1 }
CmProxyARPEntry ::= SEQUENCE {
cmProxyARPIndex Integer32,
cmProxyARPIPAddress IpAddress,
cmProxyARPSubnetMask IpAddress,
cmProxyARPInterface DisplayString,
cmProxyARPStorageType StorageType,
cmProxyARPRowStatus RowStatus
}
cmProxyARPIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"An integer index value used to uniquely identify
this Proxy ARP Entry in the cmProxyARPTable."
::= { cmProxyARPEntry 1 }
cmProxyARPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows configuration of the ProxyARP Entry IP Address."
::= { cmProxyARPEntry 2 }
cmProxyARPSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the Proxy ARP Entry Subnet Mask."
::= { cmProxyARPEntry 3 }
cmProxyARPInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the Proxy ARP Entry Interface."
::= { cmProxyARPEntry 4 }
cmProxyARPStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { cmProxyARPEntry 5 }
cmProxyARPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The cmProxyARPRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { cmProxyARPEntry 6 }
--
-- FSP150 IP Management Tunnel Table
--
ipManagementTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpManagementTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP Management Tunnel entries on the fsp150 family of products."
::= { cmIpObjects 5 }
ipManagementTunnelEntry OBJECT-TYPE
SYNTAX IpManagementTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ipManagementTunnelTable. Entries can
be created/deleted in this table by management application action."
INDEX { ipManagementTunnelIndex }
::= { ipManagementTunnelTable 1 }
IpManagementTunnelEntry ::= SEQUENCE {
ipManagementTunnelIndex Integer32,
ipManagementTunnelAssociatedPort VariablePointer,
ipManagementTunnelName DisplayString,
ipManagementTunnelType IpManagementTunnelType,
ipManagementTunnelMTU Integer32,
ipManagementTunnelEncapsulationType IpManagementTunnelEncapsulationType,
ipManagementTunnelIpAddress IpAddress,
ipManagementTunnelSubnetMask IpAddress,
ipManagementTunnelVlanId VlanId,
ipManagementTunnelSVlanEnabled TruthValue,
ipManagementTunnelSVlanId VlanId,
ipManagementTunnelDhcpEnabled TruthValue,
ipManagementTunnelRip2PktsEnabled TruthValue,
ipManagementTunnelPhysicalAddress DisplayString,
ipManagementTunnelCOS Integer32,
ipManagementTunnelCIR Unsigned32,
ipManagementTunnelEIR Unsigned32,
ipManagementTunnelBufferSize Unsigned32,
ipManagementTunnelStorageType StorageType,
ipManagementTunnelRowStatus RowStatus,
ipManagementTunnelDHCPClientIdEnabled TruthValue,
ipManagementTunnelDHCPClientId DisplayString,
ipManagementTunnelQosQueueProfile VariablePointer,
ipManagementTunnelCVlanEnabled TruthValue,
ipManagementTunnelDHCPv6Enabled TruthValue,
ipManagementTunnelIpv6Address Ipv6Address,
ipManagementTunnelIpv6AddrPrefixLen Integer32,
ipManagementTunnelIpv6StateAddrAutoConfigEnabled TruthValue,
ipManagementTunnellinkLocIpv6Addr Ipv6Address,
ipManagementTunnellinkLocIpv6AddrPrefixLen Integer32,
ipManagementTunnelIpv6PrefixAdvertiseEnabled TruthValue,
ipManagementTunnelIpv6Prefix Ipv6Address,
ipManagementTunnelIpv6PrefixLen Integer32,
ipManagementTunnelIpMode IpMode,
ipManagementTunnelIpv6RipngEnabled TruthValue,
ipManagementTunnelDhcpClassIdEnabled TruthValue,
ipManagementTunnelDhcpHostNameEnabled TruthValue,
ipManagementTunnelDhcpHostName DisplayString,
ipManagementTunnelDhcpLogServerEnabled TruthValue,
ipManagementTunnelDhcpNTPServerEnabled TruthValue,
ipManagementTunnelDhcpClientIdType DHCPCIDType,
ipManagementTunnelDhcpHostNameType DHCPHostNameType,
ipManagementTunnelDhcpVendorInfoEnabled TruthValue,
ipManagementTunnelDhcpVendorInfoType DHCPVendorInfoType,
ipManagementTunnelDhcpVendorInfo DisplayString,
ipManagementTunnelDhcpVendorInfoHideControl TruthValue,
ipManagementTunnelSharedVim TruthValue
}
ipManagementTunnelIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique integer index value used to uniquely identify
a Management Tunnel Entry in the ipManagementTunnelTable."
::= { ipManagementTunnelEntry 1 }
ipManagementTunnelAssociatedPort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of the associated physical port on the device,
to which the Management Tunnel is attached."
::= { ipManagementTunnelEntry 2 }
ipManagementTunnelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of a unique name which is also used as the name of the IP interface,
to which the Management Tunnel is attached."
::= { ipManagementTunnelEntry 3 }
ipManagementTunnelType OBJECT-TYPE
SYNTAX IpManagementTunnelType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of the type of management tunnel,
whether it is a VLAN based tunnel or a MAC based tunnel."
::= { ipManagementTunnelEntry 4 }
ipManagementTunnelMTU OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This provides the MTU of the Management Tunnel."
::= { ipManagementTunnelEntry 5 }
ipManagementTunnelEncapsulationType OBJECT-TYPE
SYNTAX IpManagementTunnelEncapsulationType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of the encapsulation type of management tunnel.
Only Ethernet encapsulation is currently supported."
::= { ipManagementTunnelEntry 6 }
ipManagementTunnelIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows configuration of the Management Tunnel IP Address."
::= { ipManagementTunnelEntry 7 }
ipManagementTunnelSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the Management Tunnel Subnet Mask."
::= { ipManagementTunnelEntry 8 }
ipManagementTunnelVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the VLAN Id in the case of
a VLAN management tunnel. This object is not relevant for a
MAC based management tunnel."
::= { ipManagementTunnelEntry 9 }
ipManagementTunnelSVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of whether or not the S-TAG is enabled
on the IP Management Tunnel.
This object is not relevant for a MAC based management tunnel."
::= { ipManagementTunnelEntry 10 }
ipManagementTunnelSVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the S-TAG VLAN Id in the case of
a VLAN management tunnel, when S-TAG is also enabled.
This object is not relevant for a MAC based management tunnel,
as well as when the ipManagementTunnelSVlanEnabled is set to false."
::= { ipManagementTunnelEntry 11 }
ipManagementTunnelDhcpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of whether or not DHCP is enabled
on the IP Management Tunnel."
::= { ipManagementTunnelEntry 12 }
ipManagementTunnelRip2PktsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of whether or not RIP2 is enabled
on the IP Management Tunnel."
::= { ipManagementTunnelEntry 13 }
ipManagementTunnelPhysicalAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the physical address (MAC Address) associated with the
IP Management Tunnel."
::= { ipManagementTunnelEntry 14 }
ipManagementTunnelCOS OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Class of Service associated with the
IP Management Tunnel. This value is also used in the p-bits of the VLAN
based management tunnels (for both VLANs in case S-TAG is enabled)."
::= { ipManagementTunnelEntry 15 }
ipManagementTunnelCIR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Management Tunnel CIR."
::= { ipManagementTunnelEntry 16 }
ipManagementTunnelEIR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Management Tunnel EIR."
::= { ipManagementTunnelEntry 17 }
ipManagementTunnelBufferSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows specification of the Management Tunnel Buffer Size."
::= { ipManagementTunnelEntry 18 }
ipManagementTunnelStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { ipManagementTunnelEntry 19 }
ipManagementTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The ipManagementTunnelRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { ipManagementTunnelEntry 20 }
ipManagementTunnelDHCPClientIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables DHCP Option 61 on the Management Tunnel.
This object is only applicable when DHCP client is enabled."
::= { ipManagementTunnelEntry 21 }
ipManagementTunnelDHCPClientId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is applicable when ipManagementTunnelDHCPClientIdEnabled is
set to TRUE. It allows users to specify the DHCP Client Id as
a DisplayString - instead of the MAC address."
::= { ipManagementTunnelEntry 22 }
ipManagementTunnelQosQueueProfile OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable."
::= { ipManagementTunnelEntry 23 }
ipManagementTunnelCVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object CTAG whether enabled, By default it is enabled."
::= { ipManagementTunnelEntry 24 }
ipManagementTunnelDHCPv6Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object DHCPv6 whether enabled, By default it is enabled."
::= { ipManagementTunnelEntry 25 }
ipManagementTunnelIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the unicast ipv6 address."
::= { ipManagementTunnelEntry 26 }
ipManagementTunnelIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the unicast ipv6 address prefix length."
::= { ipManagementTunnelEntry 27 }
ipManagementTunnelIpv6StateAddrAutoConfigEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object Ipv6StateAddrAutoConfig whether enabled, By default it is enabled."
::= { ipManagementTunnelEntry 28 }
ipManagementTunnellinkLocIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means the link local ipv6 address."
::= { ipManagementTunnelEntry 29 }
ipManagementTunnellinkLocIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means the link local ipv6 address prefix length."
::= { ipManagementTunnelEntry 30 }
ipManagementTunnelIpv6PrefixAdvertiseEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the prefix advertise whether enabled."
::= { ipManagementTunnelEntry 31 }
ipManagementTunnelIpv6Prefix OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the prefix ipv6 address."
::= { ipManagementTunnelEntry 32 }
ipManagementTunnelIpv6PrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the link local ipv6 address prefix length."
::= { ipManagementTunnelEntry 33 }
ipManagementTunnelIpMode OBJECT-TYPE
SYNTAX IpMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the ip mode for the management tunnel."
::= { ipManagementTunnelEntry 34 }
ipManagementTunnelIpv6RipngEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the ipv6's Ripng whether enabled."
::= { ipManagementTunnelEntry 35 }
ipManagementTunnelDhcpClassIdEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the class id whether enabled."
::= { ipManagementTunnelEntry 36 }
ipManagementTunnelDhcpHostNameEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the host name whether enabled."
::= { ipManagementTunnelEntry 37 }
ipManagementTunnelDhcpHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the host name."
::= { ipManagementTunnelEntry 38 }
ipManagementTunnelDhcpLogServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp log server enabled."
::= { ipManagementTunnelEntry 39 }
ipManagementTunnelDhcpNTPServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp ntp server enabled."
::= { ipManagementTunnelEntry 40 }
ipManagementTunnelDhcpClientIdType OBJECT-TYPE
SYNTAX DHCPCIDType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp cid type."
::= { ipManagementTunnelEntry 41 }
ipManagementTunnelDhcpHostNameType OBJECT-TYPE
SYNTAX DHCPHostNameType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp host name type."
::= { ipManagementTunnelEntry 42 }
ipManagementTunnelDhcpVendorInfoEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the vendor information whether enabled."
::= { ipManagementTunnelEntry 43 }
ipManagementTunnelDhcpVendorInfoType OBJECT-TYPE
SYNTAX DHCPVendorInfoType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp vendor information type."
::= { ipManagementTunnelEntry 44 }
ipManagementTunnelDhcpVendorInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the vendor information."
::= { ipManagementTunnelEntry 45 }
ipManagementTunnelDhcpVendorInfoHideControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether the dhcp vendor info is hidden or not."
::= { ipManagementTunnelEntry 46 }
ipManagementTunnelSharedVim OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes if tunnel share vlan with vim tunnel."
::= { ipManagementTunnelEntry 47 }
cmIpv6InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User managed IPv6 Address Table."
::= { cmIpObjects 6 }
cmIpv6InterfaceEntry OBJECT-TYPE
SYNTAX CmIpv6InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Allows management of IPv6 Interfaces."
AUGMENTS { cmIpInterfaceEntry }
::= { cmIpv6InterfaceTable 1 }
CmIpv6InterfaceEntry ::= SEQUENCE {
cmIpv6InterfaceMTU Integer32,
cmIpv6UnicastAddr Ipv6Address,
cmIpv6UnicastAddrPrefixLen Integer32,
cmIpv6PrefixAdvertiseEnabled TruthValue,
cmIpv6RAPrefix Ipv6Address,
cmIpv6RAPrefixLength Integer32,
cmIpv6StateAddrAutoConfigEnabled TruthValue,
cmIpv6DhcpEnabled TruthValue,
cmIpv6DhcpRole CmDhcpRole,
cmIpv6RIPngEnabled TruthValue,
cmIpv6LinkLocAddr Ipv6Address,
cmIpv6LinkLocAddrPrefixLen Integer32,
cmIpv6InterfaceGateway Ipv6Address
}
cmIpv6InterfaceMTU OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the MTU for ipv6 address interface."
::= { cmIpv6InterfaceEntry 1 }
cmIpv6UnicastAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe IPv6 Unicast Address together with Prefix."
::= { cmIpv6InterfaceEntry 2 }
cmIpv6UnicastAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe prefix length of unicast address."
::= { cmIpv6InterfaceEntry 3 }
cmIpv6PrefixAdvertiseEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether to advertise prefix to link in router mode."
::= { cmIpv6InterfaceEntry 4 }
cmIpv6RAPrefix OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the IPv6 Prefix to be dispatched to link in Router mode."
::= { cmIpv6InterfaceEntry 5 }
cmIpv6RAPrefixLength OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe Length of RA prefix."
::= { cmIpv6InterfaceEntry 6 }
cmIpv6StateAddrAutoConfigEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether enable or disable stateless
address auto configuration."
::= { cmIpv6InterfaceEntry 7 }
cmIpv6DhcpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe whether dhcp is enabled on the ipv6 interface."
::= { cmIpv6InterfaceEntry 8 }
cmIpv6DhcpRole OBJECT-TYPE
SYNTAX CmDhcpRole
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the dhcp role."
::= { cmIpv6InterfaceEntry 9 }
cmIpv6RIPngEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe RIPng whether enabled."
::= { cmIpv6InterfaceEntry 10 }
cmIpv6LinkLocAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describe Automatically generated Link-local Address."
::= { cmIpv6InterfaceEntry 11}
cmIpv6LinkLocAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describe Length of link local IPv6 address prefix."
::= { cmIpv6InterfaceEntry 12 }
cmIpv6InterfaceGateway OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the IPv6 Gateway address for the management interface on OSA540X."
::= { cmIpv6InterfaceEntry 13 }
-- FSP150 CM IPv6 Static Routes Configuration Table
cmIpv6StaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's user configured Static Ipv6 Routing table."
::= { cmIpObjects 7 }
cmIpv6StaticRouteEntry OBJECT-TYPE
SYNTAX CmIpv6StaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destina-
tion, under a particular policy."
INDEX {
cmIpv6StaticRouteDest,
cmIpv6StaticRoutePrefixLen,
cmIpv6StaticRouteNextHop,
cmIpv6StaticRouteInterface
}
::= { cmIpv6StaticRouteTable 1 }
CmIpv6StaticRouteEntry ::= SEQUENCE {
cmIpv6StaticRouteDest Ipv6Address,
cmIpv6StaticRoutePrefixLen Integer32,
cmIpv6StaticRouteNextHop Ipv6Address,
cmIpv6StaticRouteMetric Integer32,
cmIpv6StaticRouteRowStatus RowStatus,
cmIpv6StaticRouteInterface DisplayString,
cmIpv6StaticRouteAdvertise TruthValue
}
cmIpv6StaticRouteDest OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination Ipv6 address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
cmIpv6StaticRouteMask object is not equal to x."
::= { cmIpv6StaticRouteEntry 1 }
cmIpv6StaticRoutePrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the cmIpv6StaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the cmIpv6StaticRoutePrefixLen by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
cmIpv6StaticRouteDest object is not equal to
cmIpv6StaticRouteDest."
::= { cmIpv6StaticRouteEntry 2 }
cmIpv6StaticRouteNextHop OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { cmIpv6StaticRouteEntry 3 }
cmIpv6StaticRouteMetric OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
cmIpv6StaticRouteProto value. If this metric is not
used, its value should be set to 1."
DEFVAL { 1 }
::= { cmIpv6StaticRouteEntry 4 }
cmIpv6StaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { cmIpv6StaticRouteEntry 5 }
cmIpv6StaticRouteInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the Ipv6 interface for the interface static route."
::= { cmIpv6StaticRouteEntry 6 }
cmIpv6StaticRouteAdvertise OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether this static route will be advertised via routing protocol."
::= { cmIpv6StaticRouteEntry 7 }
--
-- FSP150 CM IPV6 NDP Table
--
cmNDPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmNDPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of NDP entries on the NIDs."
::= { cmIpObjects 8 }
cmNDPEntry OBJECT-TYPE
SYNTAX CmNDPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cmNDPTable. Entries can
be created/deleted in this table by management application action."
INDEX { cmNDPInterface, cmNDPIpv6Address }
::= { cmNDPTable 1 }
CmNDPEntry ::= SEQUENCE {
cmNDPIpv6Address Ipv6Address,
cmNDPMacAddress MacAddress,
cmNDPInterface DisplayString,
cmNDPStorageType StorageType,
cmNDPRowStatus RowStatus,
cmNDPEntryType IpEntryType
}
cmNDPIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object allows configuration of the NDP Entry IP Address."
::= { cmNDPEntry 1 }
cmNDPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the NDP Entry MAC Address."
::= { cmNDPEntry 2 }
cmNDPInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object allows management of the NDP Entry Interface."
::= { cmNDPEntry 3 }
cmNDPStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { cmNDPEntry 4 }
cmNDPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The cmNDPRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { cmNDPEntry 5 }
cmNDPEntryType OBJECT-TYPE
SYNTAX IpEntryType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of NDP Entry. Note that static entries can be created."
::= { cmNDPEntry 6 }
--
-- FSP150 CM Proxy NDP Table
--
cmProxyNDPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmProxyNDPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Proxy NDP entries on the NIDs. This table is not
supported in GE206 Release 4.1CC."
::= { cmIpObjects 9 }
cmProxyNDPEntry OBJECT-TYPE
SYNTAX CmProxyNDPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cmProxyNDPTable. Entries can
be created/deleted in this table by management application action."
INDEX { cmProxyNDPInterface, cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen }
::= { cmProxyNDPTable 1 }
CmProxyNDPEntry ::= SEQUENCE {
cmProxyNDPIpv6Address Ipv6Address,
cmProxyNDPIpv6PrefixLen Integer32,
cmProxyNDPInterface DisplayString,
cmProxyNDPStorageType StorageType,
cmProxyNDPRowStatus RowStatus
}
cmProxyNDPIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object allows configuration of the ProxyNDP Entry IP Address."
::= { cmProxyNDPEntry 1 }
cmProxyNDPIpv6PrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object allows management of the Proxy NDP Entry Subnet Mask."
::= { cmProxyNDPEntry 2 }
cmProxyNDPInterface OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows management of the Proxy NDP Entry Interface."
::= { cmProxyNDPEntry 3 }
cmProxyNDPStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { cmProxyNDPEntry 4 }
cmProxyNDPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The cmProxyNDPRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { cmProxyNDPEntry 5 }
--
-- FSP150 CM IPV6 OVER IPV4 TUNNEL Table
--
cmIpv6OverIpv4TunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmIpv6OverIpv4TunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Ipv6OverIpv4Tunnel entries on the NIDs."
::= { cmIpObjects 10 }
cmIpv6OverIpv4TunnelEntry OBJECT-TYPE
SYNTAX CmIpv6OverIpv4TunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cmIpv6OverIpv4TunnelTable. Entries can
be created/deleted in this table by management application action."
INDEX { cmIpv6OverIpv4TunnelIndex }
::= { cmIpv6OverIpv4TunnelTable 1 }
CmIpv6OverIpv4TunnelEntry ::= SEQUENCE {
cmIpv6OverIpv4TunnelIndex Integer32,
cmIpv6OverIpv4TunnelName DisplayString,
cmIpv6OverIpv4TunnelType Ipv6OverIpv4TunnelType,
cmIpv6OverIpv4TunnelDestIpv4Addr IpAddress,
cmIpv6OverIpv4TunnelIpv6UnicastAddress Ipv6Address,
cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen Integer32,
cmIpv6OverIpv4TunnelLinkLocalAddress Ipv6Address,
cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen Integer32,
cmIpv6OverIpv4TunnelAssociatedIpv4Interface VariablePointer,
cmIpv6OverIpv4TunnelStorageType StorageType,
cmIpv6OverIpv4TunnelRowStatus RowStatus,
cmIpv6OverIpv4PotentialRouterList DisplayString
}
cmIpv6OverIpv4TunnelIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer index value used to uniquely identify
this Ipv6OverIpv4TunnelEntry in the cmIpv6OverIpv4TunnelTable."
::= { cmIpv6OverIpv4TunnelEntry 1 }
cmIpv6OverIpv4TunnelName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the tunnel name."
::= { cmIpv6OverIpv4TunnelEntry 2 }
cmIpv6OverIpv4TunnelType OBJECT-TYPE
SYNTAX Ipv6OverIpv4TunnelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the tunnel type."
::= { cmIpv6OverIpv4TunnelEntry 3 }
cmIpv6OverIpv4TunnelDestIpv4Addr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe Destination IPv4 address.
Only applicable for configured tunnel."
::= { cmIpv6OverIpv4TunnelEntry 4 }
cmIpv6OverIpv4TunnelIpv6UnicastAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe Source IPv6 address used to transmit
IPv6 packets on tunnel. Only writable for Configured Tunnel,
read-only for other types of Tunnels."
::= { cmIpv6OverIpv4TunnelEntry 5 }
cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describe the prefix length for the unicast ipv6 address."
::= { cmIpv6OverIpv4TunnelEntry 6 }
cmIpv6OverIpv4TunnelLinkLocalAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describe the link local adderss."
::= { cmIpv6OverIpv4TunnelEntry 7 }
cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describe the prefix length for link local address."
::= { cmIpv6OverIpv4TunnelEntry 8 }
cmIpv6OverIpv4TunnelAssociatedIpv4Interface OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the IPv4 Interface that Tunnel is created on,
which could be DCN or Management tunnel."
::= { cmIpv6OverIpv4TunnelEntry 9 }
cmIpv6OverIpv4TunnelStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { cmIpv6OverIpv4TunnelEntry 10 }
cmIpv6OverIpv4TunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
The cmIpv6OverIpv4TunnelRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3)."
::= { cmIpv6OverIpv4TunnelEntry 11 }
cmIpv6OverIpv4PotentialRouterList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describe the potential router list.
And its format should be like 'a.b.c.d,e.f.g.h', split by ',' and no breakspace there."
::= { cmIpv6OverIpv4TunnelEntry 12 }
--
-- FSP150 IP loopback interface Table
--
ipLoopbackInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpLoopbackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of loopback interace entries in the management plane."
::= { cmIpObjects 11 }
ipLoopbackInterfaceEntry OBJECT-TYPE
SYNTAX IpLoopbackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ipLoopbackInterfaceTable. Entries can
be created/deleted in this table by management application action."
INDEX { ipLoopbackInterfaceIndex }
::= { ipLoopbackInterfaceTable 1 }
IpLoopbackInterfaceEntry ::= SEQUENCE {
ipLoopbackInterfaceIndex Integer32,
ipLoopbackInterfaceName DisplayString,
ipLoopbackInterfaceIpAddress IpAddress,
ipLoopbackInterfaceMask IpAddress,
ipLoopbackInterfaceStorageType StorageType,
ipLoopbackInterfaceRowStatus RowStatus,
ipLoopbackInterfaceIpMode IpMode,
ipLoopbackInterfaceIpv6Address Ipv6Address,
ipLoopbackInterfaceIpv6AddrPrefixLen Integer32
}
ipLoopbackInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique integer index value used to uniquely identify
a Loopback Interface Entry in the ipLoopbackInterfaceTable."
::= { ipLoopbackInterfaceEntry 1 }
ipLoopbackInterfaceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This allows specification of a unique name which is also used as the name of the IP interface."
::= { ipLoopbackInterfaceEntry 2 }
ipLoopbackInterfaceIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP Address of the interface."
::= { ipLoopbackInterfaceEntry 3 }
ipLoopbackInterfaceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows user to specify the IP mask of the interface."
::= { ipLoopbackInterfaceEntry 4 }
ipLoopbackInterfaceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { ipLoopbackInterfaceEntry 5 }
ipLoopbackInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of ipLoopbackInterfaceRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ipLoopbackInterfaceRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ipLoopbackInterfaceRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { ipLoopbackInterfaceEntry 6 }
ipLoopbackInterfaceIpMode OBJECT-TYPE
SYNTAX IpMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the ip mode for the interface."
::= { ipLoopbackInterfaceEntry 7 }
ipLoopbackInterfaceIpv6Address OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the ipv6 address for the interface."
::= { ipLoopbackInterfaceEntry 8 }
ipLoopbackInterfaceIpv6AddrPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object means the ipv6 address prefix length for the interface."
::= { ipLoopbackInterfaceEntry 9 }
--
-- Conformance Section
--
ipCompliances OBJECT IDENTIFIER ::= { cmIpConformance 1 }
ipGroups OBJECT IDENTIFIER ::= { cmIpConformance 2 }
ipCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for compliance to the IP Module."
MODULE -- this module
MANDATORY-GROUPS {
ipGroup
}
::= { ipCompliances 1 }
ipGroup OBJECT-GROUP
OBJECTS {
cmIpFlushARPCacheAction, cmIpProxyARPEnabled,
cmIpPingDestination, cmIpInitiatePingAction,
cmIpPingResult, cmPingInterface,
cmIpTraceRouteDestination, cmIpInitiateTraceRouteAction,
cmIpTraceRouteResult, cmIpTraceRouteInterface,
cmIpSNMPv1InterfaceName,
cmIpSourceAddressType, cmIpSourceAddressInterfaceName,
cmIpManagementTrafficBridgingEnabled,
cmIpManagementTrafficBridgingSecurityEnabled,
cmIpInterfaceName, cmIpInterface, cmIpInterfaceMask,
cmIpInterfaceDhcpEnabled, cmIpInterfaceMTU, cmIpInterfaceDhcpRole,
cmIpInterfacePhysicalAddress, cmIpInterfaceRIPv2Enabled,
cmIpInterfaceDHCPClientIdEnabled, cmIpInterfaceDHCPClientId,
cmIpInterfaceIpMode,
cmIpInterfaceDhcpClassIdEnabled,
cmIpInterfaceDhcpHostNameEnabled,
cmIpInterfaceDhcpHostName,
cmIpInterfaceDhcpLogServerEnabled,
cmIpInterfaceDhcpNTPServerEnabled,
cmIpInterfaceDhcpClientIdType,
cmIpInterfaceDhcpHostNameType,
cmIpInterfaceDhcpVendorInfoEnabled,
cmIpInterfaceDhcpVendorInfoType,
cmIpInterfaceDhcpVendorInfo,
cmIpInterfaceDhcpVendorInfoHideControl,
cmIpInterfaceGateway,
cmStaticRouteDest, cmStaticRouteMask,
cmStaticRouteNextHop, cmStaticRouteMetric,
cmStaticRouteRowStatus, cmStaticRouteInterface, cmStaticRouteAdvertise,
cmARPIndex, cmARPIPAddress,
cmARPMacAddress, cmARPInterface, cmARPStorageType,
cmARPRowStatus, cmARPEntryType,
cmProxyARPIndex, cmProxyARPIPAddress,
cmProxyARPSubnetMask, cmProxyARPInterface,
cmProxyARPStorageType, cmProxyARPRowStatus,
ipManagementTunnelIndex, ipManagementTunnelAssociatedPort,
ipManagementTunnelName, ipManagementTunnelType,
ipManagementTunnelMTU,
ipManagementTunnelEncapsulationType, ipManagementTunnelIpAddress,
ipManagementTunnelSubnetMask, ipManagementTunnelVlanId,
ipManagementTunnelSVlanEnabled, ipManagementTunnelSVlanId,
ipManagementTunnelDhcpEnabled, ipManagementTunnelRip2PktsEnabled,
ipManagementTunnelPhysicalAddress, ipManagementTunnelCOS,
ipManagementTunnelCIR, ipManagementTunnelEIR,
ipManagementTunnelBufferSize, ipManagementTunnelStorageType,
ipManagementTunnelRowStatus, ipManagementTunnelQosQueueProfile,
ipManagementTunnelDHCPClientIdEnabled, ipManagementTunnelDHCPClientId,
ipManagementTunnelCVlanEnabled, ipManagementTunnelIpMode,
ipManagementTunnelDhcpClassIdEnabled,
ipManagementTunnelDhcpHostNameEnabled,
ipManagementTunnelDhcpHostName,
ipManagementTunnelDhcpLogServerEnabled,
ipManagementTunnelDhcpNTPServerEnabled,
ipManagementTunnelDhcpClientIdType,
ipManagementTunnelDhcpHostNameType,
cmIpManagementTrafficDscpEnabled,
cmIpManagementTrafficDscp,
cmIpManagementTrafficBridgingInterface,
cmIpManagementTrafficBridgingIpv4Gateway,
cmIpManagementTrafficBridgingIpv6Gateway,
ipManagementTunnelDhcpVendorInfoEnabled,
ipManagementTunnelDhcpVendorInfoType,
ipManagementTunnelDhcpVendorInfo,
ipManagementTunnelDhcpVendorInfoHideControl,
ipManagementTunnelSharedVim
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the FSP150CM IP Services."
::= { ipGroups 1 }
ipv6Group OBJECT-GROUP
OBJECTS {
ipManagementTunnelDHCPv6Enabled,
ipManagementTunnelIpv6Address,
ipManagementTunnelIpv6AddrPrefixLen,
ipManagementTunnelIpv6StateAddrAutoConfigEnabled,
ipManagementTunnellinkLocIpv6Addr,
ipManagementTunnellinkLocIpv6AddrPrefixLen,
ipManagementTunnelIpv6PrefixAdvertiseEnabled,
ipManagementTunnelIpv6Prefix,
ipManagementTunnelIpv6PrefixLen,
ipManagementTunnelIpv6RipngEnabled,
cmIpv6InterfaceMTU, cmIpv6UnicastAddr, cmIpv6UnicastAddrPrefixLen,
cmIpv6PrefixAdvertiseEnabled, cmIpv6RAPrefix,
cmIpv6RAPrefixLength, cmIpv6StateAddrAutoConfigEnabled,
cmIpv6DhcpEnabled, cmIpv6DhcpRole,
cmIpv6RIPngEnabled, cmIpv6LinkLocAddr,
cmIpv6LinkLocAddrPrefixLen, cmIpv6InterfaceGateway, cmIpv6StaticRouteDest,
cmIpv6StaticRoutePrefixLen, cmIpv6StaticRouteNextHop,
cmIpv6StaticRouteMetric, cmIpv6StaticRouteRowStatus,
cmIpv6StaticRouteInterface, cmIpv6StaticRouteAdvertise,
cmNDPIpv6Address, cmNDPMacAddress,
cmNDPInterface, cmNDPStorageType,
cmNDPRowStatus, cmNDPEntryType,
cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen,
cmProxyNDPInterface, cmProxyNDPStorageType,
cmProxyNDPRowStatus, cmIpv6OverIpv4TunnelIndex,
cmIpv6OverIpv4TunnelName, cmIpv6OverIpv4TunnelType,
cmIpv6OverIpv4TunnelDestIpv4Addr,
cmIpv6OverIpv4TunnelIpv6UnicastAddress,
cmIpv6OverIpv4TunnelAssociatedIpv4Interface,
cmIpv6OverIpv4TunnelStorageType,
cmIpv6OverIpv4TunnelRowStatus, cmIpv6InitiatePingAction,
cmIpv6InitiatePingAction, cmIpv6TraceRouteDestination,
cmIpv6InitiateTraceRouteAction, cmIpv6PingInterface,
cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen,
cmIpv6OverIpv4TunnelLinkLocalAddress,
cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen,
cmIpv6OverIpv4PotentialRouterList, cmIpv6FwdEnabled,
cmIpv6ProxyNDPEnabled, cmIpFlushNDPCacheAction, cmIpPtpArpRtrvAction,
ipLoopbackInterfaceIndex,ipLoopbackInterfaceName,ipLoopbackInterfaceIpAddress,
ipLoopbackInterfaceMask,ipLoopbackInterfaceStorageType,ipLoopbackInterfaceRowStatus,
ipLoopbackInterfaceIpMode,ipLoopbackInterfaceIpv6Address,
ipLoopbackInterfaceIpv6AddrPrefixLen
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the FSP150CM IPv6 Services."
::= { ipGroups 2 }
END