david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/adva/CM-SAT-MIB

1424 lines
48 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CM-SAT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, IpAddress, Unsigned32, Counter64
FROM SNMPv2-SMI
DateAndTime, DisplayString, TruthValue, RowStatus, StorageType,
MacAddress, VariablePointer, TEXTUAL-CONVENTION
FROM SNMPv2-TC
fsp150cm
FROM ADVA-MIB
VlanId, VlanPriority, CmPmBinAction
FROM CM-COMMON-MIB
neIndex, shelfIndex, slotIndex, networkElementEntry
FROM CM-ENTITY-MIB
AdminState, OperationalState, SecondaryState,
MepDestinationType
FROM CM-COMMON-MIB
EsaProbePktIntervalType, EsaProbePktIntervalType
FROM CM-SA-MIB
PolicerColorMode
FROM CM-FACILITY-MIB
dot1agCfmMepEntry
FROM IEEE8021-CFM-MIB
Dot1agCfmMepIdOrZero
FROM IEEE8021-CFM-MIB;
cmServiceActivationMIB MODULE-IDENTITY
LAST-UPDATED "201704050000Z"
ORGANIZATION "ADVA Optical Networking SE"
CONTACT-INFO
"Web URL: http://adva.com/
E-mail: support@adva.com
Postal: ADVA Optical Networking SE
Campus Martinsried
Fraunhoferstrasse 9a
82152 Martinsried/Munich
Germany
Phone: +49 089 89 06 65 0
Fax: +49 089 89 06 65 199 "
DESCRIPTION
"This module defines the Service Activation MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA."
REVISION "201704050000Z"
DESCRIPTION
"Notes from release 201704050000Z
a) add aborted enumeration to SatStatus
Notes from release 201612020000Z
a) added satStreamDestMepEnabled to satStreamTable
Notes from release 201309120000Z
"
::= {fsp150cm 28}
--
-- OID definitions
--
cmServActivationObjects OBJECT IDENTIFIER ::= {cmServiceActivationMIB 1}
cmServActivationNotifications OBJECT IDENTIFIER ::= {cmServiceActivationMIB 2}
cmServActivationConformance OBJECT IDENTIFIER ::= {cmServiceActivationMIB 3}
ServiceActivationTestMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The test mode of Service Activation Test."
SYNTAX INTEGER {
oneWay(1),
twoWay(2)
}
SatProceduresType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"All procedures type of the Service Activation Test."
SYNTAX INTEGER {
none(1),
configTestCir(2),
configTestEir(3),
configTestCbs(4),
configTestEbs(5),
configTestPolicing(6),
performanceTest(7)
}
SatProceduresList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bit Mask that specifies all the Service Activation Test procedure."
SYNTAX BITS {
configTestCir(1),
configTestEir(2),
configTestCbs(3),
configTestEbs(4),
configTestPolicing(5),
performance(6)
}
SatStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the overall Service Activation Test."
SYNTAX INTEGER {
completed(1),
notStarted(2),
inProgress(3),
failed(4),
aborted(5)
}
SatDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of Service Activation Test."
SYNTAX INTEGER {
forward(1),
backward(2)
}
SatFramePayloadType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object describes the Payload type of Service Activation Test frame."
SYNTAX INTEGER {
prbs31(1),
custom(2)
}
SatTestAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object describes the operation on Service Activation Test frame Payload type."
SYNTAX INTEGER {
start(1),
stop(2),
notApplicable(3)
}
SatResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object describes the result of Service Activation Test."
SYNTAX INTEGER {
none(1),
pass(2),
fail(3)
}
--
-- SAT Control Table
--
satControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of SAT Control."
::= { cmServActivationObjects 1 }
satControlEntry OBJECT-TYPE
SYNTAX SatControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satControlTable."
INDEX { neIndex, satControlIndex }
::= { satControlTable 1 }
SatControlEntry ::= SEQUENCE {
satControlIndex Integer32,
satControlName DisplayString,
satControlTestMode ServiceActivationTestMode,
satControlTestProcedures SatProceduresList,
satControlConfigTestDuration Integer32,
satControlConfigCIRTestStepNum Integer32,
satControlConfigCIRTestStepDuration Integer32,
satControlPerfTestDuration Integer32,
satControlStatus SatStatus,
satControlAction SatTestAction,
satControlStorageType StorageType,
satControlRowStatus RowStatus,
satControlFailCause DisplayString,
satControlTestStartTime DateAndTime,
satControlFlpduTagOverride TruthValue
}
satControlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Service Activation Test."
::= { satControlEntry 1 }
satControlName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The alias of the Service Activation Test."
::= { satControlEntry 2 }
satControlTestMode OBJECT-TYPE
SYNTAX ServiceActivationTestMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of the Service Activation Test."
::= { satControlEntry 3 }
satControlTestProcedures OBJECT-TYPE
SYNTAX SatProceduresList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A List of Service Activation Test procedures."
::= { satControlEntry 4 }
satControlConfigTestDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of CIR step test, expressed in seconds."
::= { satControlEntry 5 }
satControlConfigCIRTestStepNum OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of steps in CIR step test."
::= { satControlEntry 6 }
satControlConfigCIRTestStepDuration OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of each CIR step test."
::= { satControlEntry 7 }
satControlPerfTestDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the SAT Performance Test, expressed in minutes."
::= { satControlEntry 8 }
satControlStatus OBJECT-TYPE
SYNTAX SatStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall SAT Control Test Status."
::= { satControlEntry 9 }
satControlAction OBJECT-TYPE
SYNTAX SatTestAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start/stop action of the SAT Control."
::= { satControlEntry 10 }
satControlStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { satControlEntry 11 }
satControlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satControlRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satControlRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satControlRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { satControlEntry 12 }
satControlFailCause OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The information about the reason of the Test failure."
::= { satControlEntry 13 }
satControlTestStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of this SAT Control."
::= { satControlEntry 14 }
satControlFlpduTagOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether permit user to configure FLPDU explicitly.
Disabled: FLPDUs tag is inherited from SCM of MEP.
Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP."
::= { satControlEntry 15 }
--
-- SAT Stream Table
--
satStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of SAT Streams."
::= { cmServActivationObjects 2 }
satStreamEntry OBJECT-TYPE
SYNTAX SatStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satStreamTable."
INDEX { neIndex, satControlIndex, satStreamIndex }
::= { satStreamTable 1 }
SatStreamEntry ::= SEQUENCE {
satStreamIndex Integer32,
satStreamName DisplayString,
satStreamTestPort VariablePointer,
satStreamTestDirection SatDirection,
satStreamDestMacAddress MacAddress,
satStreamFramePayloadType SatFramePayloadType,
satStreamCustomFramePayload DisplayString,
satStreamFrameSizeList DisplayString,
satStreamSacProfileId VariablePointer,
satStreamSrcMepId VariablePointer,
satStreamDestMepType MepDestinationType,
satStreamDestMepId Integer32,
satStreamDestMepMacAddr MacAddress,
satStreamDmmPacketSize Integer32,
satStreamDmmPacketInterval EsaProbePktIntervalType,
satStreamOverallResult SatResult,
satStreamAction SatTestAction,
satStreamStatus SatStatus,
satStreamCurrentTestProcedure SatProceduresType,
satStreamCurrentConfigCirTestStep Integer32,
satStreamInner1VlanId VlanId,
satStreamInner1VlanPri VlanPriority,
satStreamInner1VlanEnabled TruthValue,
satStreamInner1ValnEtherType Integer32,
satStreamInner2VlanId VlanId,
satStreamInner2VlanPri VlanPriority,
satStreamInner2VlanEnabled TruthValue,
satStreamInner2VlanEtherType Integer32,
satStreamOuterVlanId VlanId,
satStreamOuterVlanPri VlanPriority,
satStreamOuterVlanEnabled TruthValue,
satStreamOuterVlanEtherType Integer32,
satStreamDeiEnabled TruthValue,
satStreamGreenPcp Integer32,
satStreamYellowPcp Integer32,
satStreamColorMode PolicerColorMode,
satStreamCirLo Unsigned32,
satStreamCirHi Unsigned32,
satStreamEirLo Unsigned32,
satStreamEirHi Unsigned32,
satStreamCbs Unsigned32,
satStreamEbs Unsigned32,
satStreamStorageType StorageType,
satStreamRowStatus RowStatus,
satStreamDmmPktPriority VlanPriority,
satStreamMFactor Unsigned32,
satStreamDestMepEnabled TruthValue,
satStreamLlActivateEnabled TruthValue
}
satStreamIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Service Activation Test Stream."
::= { satStreamEntry 1 }
satStreamName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The alias of the Service Activation Test Stream."
::= { satStreamEntry 2 }
satStreamTestPort OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The related port of the Service Activation Test Stream."
::= { satStreamEntry 3 }
satStreamTestDirection OBJECT-TYPE
SYNTAX SatDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction of the Service Activation Test Stream."
::= { satStreamEntry 4 }
satStreamDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the destination MAC address of FLPDU."
::= { satStreamEntry 5 }
satStreamFramePayloadType OBJECT-TYPE
SYNTAX SatFramePayloadType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Payload of the Frame Loss PDU."
::= { satStreamEntry 6 }
satStreamCustomFramePayload OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the customized frame payload."
::= { satStreamEntry 7 }
satStreamFrameSizeList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes a list of Frame Sizes used in FLPDU."
::= { satStreamEntry 8 }
satStreamSacProfileId OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the related Service Acceptance Criteria (SAC) Profile Id."
::= { satStreamEntry 9 }
satStreamSrcMepId OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Local MEP related with SAT Test Stream."
::= { satStreamEntry 10 }
satStreamDestMepType OBJECT-TYPE
SYNTAX MepDestinationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the type of Destination MEP, which can be based on MEP id or MAC Address.
This is applicable only if satStreamDestMepEnabled is true."
::= { satStreamEntry 11 }
satStreamDestMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the destination MEP id.
This is applicable only if satStreamDestMepEnabled is true."
::= { satStreamEntry 12 }
satStreamDestMepMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Destination MEP's MAC Address.
This is applicable only if satStreamDestMepEnabled is true."
::= { satStreamEntry 13 }
satStreamDmmPacketSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Delay Measurement Message (DMM) frame size."
::= { satStreamEntry 14 }
satStreamDmmPacketInterval OBJECT-TYPE
SYNTAX EsaProbePktIntervalType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Delay Measurement Message (DMM) frame generation interval."
::= { satStreamEntry 15 }
satStreamOverallResult OBJECT-TYPE
SYNTAX SatResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the test result."
::= { satStreamEntry 16 }
satStreamAction OBJECT-TYPE
SYNTAX SatTestAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the operation on this test."
::= { satStreamEntry 17 }
satStreamStatus OBJECT-TYPE
SYNTAX SatStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the test status of this Test Stream."
::= { satStreamEntry 18 }
satStreamCurrentTestProcedure OBJECT-TYPE
SYNTAX SatProceduresType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the current test procedure."
::= { satStreamEntry 19 }
satStreamCurrentConfigCirTestStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the current step number of CIR Test."
::= { satStreamEntry 20 }
satStreamInner1VlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Inner1 VLAN Id."
::= { satStreamEntry 21 }
satStreamInner1VlanPri OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Inner1 VLAN Priority."
::= { satStreamEntry 22 }
satStreamInner1VlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the Inner1 VLAN enabled."
::= { satStreamEntry 23 }
satStreamInner1ValnEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Inner2 VLAN EtherType."
::= { satStreamEntry 24 }
satStreamInner2VlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Inner2 VLAN Id."
::= { satStreamEntry 25 }
satStreamInner2VlanPri OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Inner2 VLAN Priority."
::= { satStreamEntry 26 }
satStreamInner2VlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the Inner2 VLAN enabled."
::= { satStreamEntry 27 }
satStreamInner2VlanEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the Inner2 VLAN ether type."
::= { satStreamEntry 28 }
satStreamOuterVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Outer VLAN Id."
::= { satStreamEntry 29 }
satStreamOuterVlanPri OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Outer VLAN Priority."
::= { satStreamEntry 30 }
satStreamOuterVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the Outer VLAN enabled."
::= { satStreamEntry 31 }
satStreamOuterVlanEtherType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the Outer VLAN Ethertype."
::= { satStreamEntry 32 }
satStreamDeiEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes whether the DEI enabled."
::= { satStreamEntry 33 }
satStreamGreenPcp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the PCP value for Green Packets."
::= { satStreamEntry 34 }
satStreamYellowPcp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the PCP value for Yellow Packets."
::= { satStreamEntry 35 }
satStreamColorMode OBJECT-TYPE
SYNTAX PolicerColorMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the color mode for Policing test."
::= { satStreamEntry 36 }
satStreamCirLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes CIR low 32 bits."
::= { satStreamEntry 37 }
satStreamCirHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes CIR high 32 bits."
::= { satStreamEntry 38 }
satStreamEirLo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes EIR low 32 bits."
::= { satStreamEntry 39 }
satStreamEirHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes EIR high 32 bits."
::= { satStreamEntry 40 }
satStreamCbs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes CBS."
::= { satStreamEntry 41 }
satStreamEbs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes CBS."
::= { satStreamEntry 42 }
satStreamStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { satStreamEntry 43 }
satStreamRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satStreamRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satStreamRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satStreamRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { satStreamEntry 44 }
satStreamDmmPktPriority OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the Dmm packet priority."
::= { satStreamEntry 45 }
satStreamMFactor OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The M factor is used in test result validation.
It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time.
Roughly, it equals to EBS/Test Duration, user should configure its value based on experience test."
::= { satStreamEntry 46 }
satStreamDestMepEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For a SAT two-way test, the remote end is expected to have a loopback for FLPDUs, but it may or may not have
a Responder MEP to process DMMs. This object indicates whether the remote end has a Responder MEP or not.
If the Responder MEP is present, two-way delay is computed by the Controller MEP once DMR is received,
if the Responder MEP is not present, the two-way delay is computed when the Controller MEP receives the looped back DMM."
::= { satStreamEntry 47 }
satStreamLlActivateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute specifies whether Latching Loopback needs to be activated for the SAT stream during a SAT test.
It is only applicable for two way test."
::= { satStreamEntry 48 }
--
-- SAT Result Stats Table
--
satResultStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatResultStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of SAT Result Statistics."
::= { cmServActivationObjects 3 }
satResultStatsEntry OBJECT-TYPE
SYNTAX SatResultStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satResultStatsTable."
INDEX { neIndex, satControlIndex, satStreamIndex, satResultStatsTestType, satResultStatsStepNumber }
::= { satResultStatsTable 1 }
SatResultStatsEntry ::= SEQUENCE {
satResultStatsTestType SatProceduresType,
satResultStatsStepNumber Integer32,
satResultStatsSessionId Unsigned32,
satResultStatsStartTime DateAndTime,
satResultStatsEndTime DateAndTime,
satResultStatsStatus SatStatus,
satResultStatsResult SatResult,
satResultStatsMinIRGMeasured Counter64,
satResultStatsAvgIRGMeasured Counter64,
satResultStatsMaxIRGMeasured Counter64,
satResultStatsMinIRYMeasured Counter64,
satResultStatsAvgIRYMeasured Counter64,
satResultStatsMaxIRYMeasured Counter64,
satResultStatsFlrGMeasured Integer32,
satResultStatsFlrYMeasured Integer32,
satResultStatsFlrGCounts Counter64,
satResultStatsFlrYCounts Counter64,
satResultStatsMinFTDGMeasured Unsigned32,
satResultStatsAvgFTDGMeasured Unsigned32,
satResultStatsMaxFTDGMeasured Unsigned32,
satResultStatsIMinFDVGMeasured Unsigned32,
satResultStatsIAvgFDVGMeasured Unsigned32,
satResultStatsIMaxFDVGMeasured Unsigned32,
satResultStatsISyncErrorsNum Unsigned32,
satResultStatsIfNegFLG TruthValue,
satResultStatsIfNegFLY TruthValue,
satResultStatsAvgIRT Counter64,
satResultStatsFlrTMeasured Integer32,
satResultStatsFlTCounts Counter64,
satResultStatsIfNegFLT TruthValue
}
satResultStatsTestType OBJECT-TYPE
SYNTAX SatProceduresType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Test Type of the Service Activation Test."
::= { satResultStatsEntry 1 }
satResultStatsStepNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Test step number of the Service Activation Test."
::= { satResultStatsEntry 2 }
satResultStatsSessionId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The session id of the Service Activation Test."
::= { satResultStatsEntry 3 }
satResultStatsStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the Service Activation Test."
::= { satResultStatsEntry 4 }
satResultStatsEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The end time of the Service Activation Test."
::= { satResultStatsEntry 5 }
satResultStatsStatus OBJECT-TYPE
SYNTAX SatStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Status of the Service Activation Test."
::= { satResultStatsEntry 6 }
satResultStatsResult OBJECT-TYPE
SYNTAX SatResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes SAT whether pass."
::= { satResultStatsEntry 7 }
satResultStatsMinIRGMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the minimum Information Rate (IR) for Green Packets."
::= { satResultStatsEntry 8 }
satResultStatsAvgIRGMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the average Information Rate (IR) for Green Packets."
::= { satResultStatsEntry 9 }
satResultStatsMaxIRGMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the maximum Information Rate (IR) for Green Packets."
::= { satResultStatsEntry 10 }
satResultStatsMinIRYMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the minimum Information Rate (IR) for Yellow Packets."
::= { satResultStatsEntry 11 }
satResultStatsAvgIRYMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the average Information Rate (IR) for Yellow Packets."
::= { satResultStatsEntry 12 }
satResultStatsMaxIRYMeasured OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the maximum Information Rate (IR) for Yellow Packets."
::= { satResultStatsEntry 13 }
satResultStatsFlrGMeasured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss Ratio (FLR) for Green Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
::= { satResultStatsEntry 14 }
satResultStatsFlrYMeasured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss Ratio (FLR) for Yellow Packets.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
::= { satResultStatsEntry 15 }
satResultStatsFlrGCounts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss (FL) count for Green Packets."
::= { satResultStatsEntry 16 }
satResultStatsFlrYCounts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss (FL) count for Yellow Packets."
::= { satResultStatsEntry 17 }
satResultStatsMinFTDGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the minimum Frame Transfer Delay (FTD) for Green Packets."
::= { satResultStatsEntry 18 }
satResultStatsAvgFTDGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the average Frame Transfer Delay (FTD) for Green Packets."
::= { satResultStatsEntry 19 }
satResultStatsMaxFTDGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the maximum Frame Transfer Delay (FTD) for Green Packets."
::= { satResultStatsEntry 20 }
satResultStatsIMinFDVGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the minimum Frame Delay Variation (FDV) for Green Packets."
::= { satResultStatsEntry 21 }
satResultStatsIAvgFDVGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the average Frame Delay Variation (FDV) for Green Packets."
::= { satResultStatsEntry 22 }
satResultStatsIMaxFDVGMeasured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the maximum Frame Delay Variation (FDV) for Green Packets."
::= { satResultStatsEntry 23 }
satResultStatsISyncErrorsNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test."
::= { satResultStatsEntry 24 }
satResultStatsIfNegFLG OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means whether negative green frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected."
::= { satResultStatsEntry 25 }
satResultStatsIfNegFLY OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means whether negative yellow frame loss.
True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected.
False: negative loss of yellow packets doesn't occur, which means not receiving more yellow packets than expected."
::= { satResultStatsEntry 26 }
satResultStatsAvgIRT OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test."
::= { satResultStatsEntry 27 }
satResultStatsFlrTMeasured OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss Ratio (FLR) for Total Packets.
No distinguish color, negative value means receiving much more packets than expected.
Only valid for color blind test.
If its value is 26000001, it means 26.000001% frame lost."
::= { satResultStatsEntry 28 }
satResultStatsFlTCounts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Frame Loss (FL) count for Total Packets."
::= { satResultStatsEntry 29 }
satResultStatsIfNegFLT OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object means whether negative total frame loss.
True: negative loss of green packets occurs, which means receiving more green packets than expected.
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected."
::= { satResultStatsEntry 30 }
--
-- SAT Service Acceptance Criteria Profile Table
--
satSacProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatSacProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile."
::= { cmServActivationObjects 4 }
satSacProfileEntry OBJECT-TYPE
SYNTAX SatSacProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satSacProfileTable."
INDEX { satSacProfileIndex }
::= { satSacProfileTable 1 }
SatSacProfileEntry ::= SEQUENCE {
satSacProfileIndex Integer32,
satSacProfileAlias DisplayString,
satSacProfileFLR Integer32,
satSacProfileFTD Unsigned32,
satSacProfileFDV Unsigned32,
satSacProfileStorageType StorageType,
satSacProfileRowStatus RowStatus
}
satSacProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of SAT Service Acceptance Criteria (SAC) Profile."
::= { satSacProfileEntry 1 }
satSacProfileAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The alias of SAT Service Acceptance Criteria (SAC) Profile."
::= { satSacProfileEntry 2 }
satSacProfileFLR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile.
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
::= { satSacProfileEntry 3 }
satSacProfileFTD OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile."
::= { satSacProfileEntry 4 }
satSacProfileFDV OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile."
::= { satSacProfileEntry 5 }
satSacProfileStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { satSacProfileEntry 6 }
satSacProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satSacProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satSacProfileRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satSacProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { satSacProfileEntry 7 }
--
-- SAT Responder Session Table
--
satResponderSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatResponderSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of entries for the control of SAT Responder Session."
::= { cmServActivationObjects 5 }
satResponderSessionEntry OBJECT-TYPE
SYNTAX SatResponderSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satResponderSessionTable."
INDEX { neIndex, satResponderSessionIndex }
::= { satResponderSessionTable 1 }
SatResponderSessionEntry ::= SEQUENCE {
satResponderSessionIndex Unsigned32,
satResponderSessionId Unsigned32,
satResponderSessionControlMepMacAddr MacAddress,
satResponderSessionMepId VariablePointer,
satResponderSessionStorageType StorageType,
satResponderSessionRowStatus RowStatus
}
satResponderSessionIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the entry."
::= { satResponderSessionEntry 1 }
satResponderSessionId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of active test session negotiated between SAT Responder and SAT Control."
::= { satResponderSessionEntry 2 }
satResponderSessionControlMepMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Control MEP's MAC Address."
::= { satResponderSessionEntry 3 }
satResponderSessionMepId OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local MEP Id."
::= { satResponderSessionEntry 4 }
satResponderSessionStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of storage configured for this entry."
::= { satResponderSessionEntry 5 }
satResponderSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of satResponderSessionRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
satResponderSessionRowStatus value as createAndGo(4).
Upon successful row creation, this variable has a
value of active(1).
The satResponderSessionRowStatus object may be modified if
the associated instance of this object is equal to active(1)."
::= { satResponderSessionEntry 6 }
--
-- networkElementSatParamsTable
--
networkElementSatParamsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkElementSatParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries may be auto discovered, or can be explicitly created by
SNMP Manager. Each remotely discovered shelf is represented as
a row in this table."
::= { cmServActivationObjects 6 }
networkElementSatParamsEntry OBJECT-TYPE
SYNTAX NetworkElementSatParamsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the networkElementSatParamsTable."
AUGMENTS { networkElementEntry }
::= { networkElementSatParamsTable 1 }
NetworkElementSatParamsEntry ::= SEQUENCE {
neSatParamsEtherType Unsigned32
}
neSatParamsEtherType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object describes the SAT System EtherType."
::= { networkElementSatParamsEntry 1 }
--
-- satCfmMepExtTable
--
satCfmMepExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SatCfmMepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This objects describe the SAT responder whether enabled on the MEP."
::= { cmServActivationObjects 7 }
satCfmMepExtEntry OBJECT-TYPE
SYNTAX SatCfmMepExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the satCfmMepExtTable."
AUGMENTS { dot1agCfmMepEntry }
::= { satCfmMepExtTable 1 }
SatCfmMepExtEntry ::= SEQUENCE {
satCfmMepSatResponderEnabled TruthValue
}
satCfmMepSatResponderEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects describes the SAT Responder whether enabled on the MEP."
::= { satCfmMepExtEntry 1 }
--
-- Conformance
--
cmServActivationCompliances OBJECT IDENTIFIER ::= {cmServActivationConformance 1}
cmServActivationGroups OBJECT IDENTIFIER ::= {cmServActivationConformance 2}
cmServActivationCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the CM SAT
group."
MODULE -- this module
MANDATORY-GROUPS {
cmSatGroup
}
::= { cmServActivationCompliances 1 }
cmSatGroup OBJECT-GROUP
OBJECTS {
satControlIndex, satControlName, satControlTestMode, satControlTestProcedures,
satControlConfigTestDuration, satControlConfigCIRTestStepNum, satControlConfigCIRTestStepDuration,
satControlPerfTestDuration, satControlStatus, satControlAction, satControlFailCause,satControlTestStartTime,
satControlFlpduTagOverride, satStreamIndex, satStreamName, satStreamTestPort, satStreamTestDirection,
satStreamDestMacAddress, satStreamFramePayloadType, satStreamCustomFramePayload,
satStreamFrameSizeList, satStreamSacProfileId, satStreamSrcMepId, satStreamDestMepType,
satStreamDestMepId, satStreamDestMepMacAddr, satStreamDmmPacketSize, satStreamDmmPacketInterval,
satStreamOverallResult, satStreamAction, satStreamStatus, satStreamCurrentTestProcedure,
satStreamCurrentConfigCirTestStep, satStreamInner1VlanId, satStreamInner1VlanPri, satStreamInner1VlanEnabled,
satStreamInner1ValnEtherType, satStreamInner2VlanId, satStreamInner2VlanPri, satStreamInner2VlanEnabled,
satStreamInner2VlanEtherType, satStreamOuterVlanId, satStreamOuterVlanPri, satStreamOuterVlanEnabled,
satStreamOuterVlanEtherType, satStreamDeiEnabled, satStreamGreenPcp, satStreamYellowPcp,
satStreamColorMode, satStreamCirLo, satStreamCirHi, satStreamEirLo, satStreamEirHi, satStreamCbs, satStreamEbs,
satStreamStorageType, satStreamRowStatus, satControlStorageType, satControlRowStatus, satStreamDmmPktPriority,
satStreamMFactor, satStreamDestMepEnabled, satStreamLlActivateEnabled,
satResultStatsSessionId, satResultStatsTestType, satResultStatsStepNumber, satResultStatsStartTime,
satResultStatsEndTime, satResultStatsStatus, satResultStatsResult, satResultStatsMinIRGMeasured,
satResultStatsAvgIRGMeasured, satResultStatsMaxIRGMeasured, satResultStatsMinIRYMeasured,
satResultStatsAvgIRYMeasured, satResultStatsMaxIRYMeasured, satResultStatsFlrGMeasured,
satResultStatsFlrYMeasured, satResultStatsFlrGCounts, satResultStatsFlrYCounts,
satResultStatsMinFTDGMeasured, satResultStatsAvgFTDGMeasured, satResultStatsMaxFTDGMeasured,
satResultStatsIMinFDVGMeasured, satResultStatsIAvgFDVGMeasured, satResultStatsIMaxFDVGMeasured,
satResultStatsISyncErrorsNum, satResultStatsIfNegFLG, satResultStatsIfNegFLY,
satResultStatsAvgIRT,satResultStatsFlrTMeasured,satResultStatsFlTCounts,satResultStatsIfNegFLT,
satSacProfileIndex, satSacProfileAlias, satSacProfileFLR, satSacProfileFTD, satSacProfileFDV,
satSacProfileStorageType, satSacProfileRowStatus, satResponderSessionIndex, satResponderSessionId,
satResponderSessionControlMepMacAddr, satResponderSessionMepId,
satResponderSessionStorageType, satResponderSessionRowStatus, satCfmMepSatResponderEnabled
}
STATUS current
DESCRIPTION
"A collection of objects used to manage the CM SAT functionality."
::= { cmServActivationGroups 1 }
END
Reference in New Issue Copy Permalink