david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/aerohive/AH_TRAP_MIB

945 lines
39 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- Copyright (c) 2006-2013, Aerohive Networks, Inc
-- All rights reserved.
AH_TRAP_MIB DEFINITIONS ::= BEGIN
--
-- Imports
--
IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
ahAPTrap, AhString, AhNodeID, AhMACProtocol FROM AH-SMI-MIB;
--
-- Module Identity
--
AhAuthenticationMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Authentication method supported by the HiveAP"
SYNTAX INTEGER {
cwp (0),
open (1),
wep-open (2),
wep-shared (3),
wpa-psk (4),
wpa2-psk (5),
wpa-8021x (6),
wpa2-8021X (7),
wpa-auto-psk (8),
wpa-auto-8021x (9),
dynamic-wep (10),
8021x (11)
}
AhEncrytionMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Encryption method supported by the HiveAP"
SYNTAX INTEGER {
AES (0),
TKIP (1),
WEP (2),
Non (3)
}
ahTrapModule MODULE-IDENTITY
LAST-UPDATED "201608310000Z" -- Aug 31, 2016
ORGANIZATION "Aerohive Networks, Inc."
CONTACT-INFO "See AH-SMI-MIB for information."
DESCRIPTION
"This is the MIB module for access point trap definitions
for Aerohive Networks Inc."
::= { ahAPTrap 1 }
ahNotificationVarBind OBJECT IDENTIFIER ::= { ahAPTrap 2 }
AhState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "It defines the state for interfaces."
SYNTAX INTEGER {
ahUp (1), -- Interface up
ahDown (2) -- Interface down
}
AhProbableCause ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "It defines the probable cause for a problem on the HiveAP."
SYNTAX INTEGER {
ahClear (0),
ahUnknown (1),
ahFlashFailure (2),
ahFanFailure (3),
ahPowerSupplyFailure (4),
ahSoftwareUpgradeFailure (5),
ahRadioFailure (6),
ahConfFailure (7)
}
--
-- Trap Definitions
--
ahFailureTrap NOTIFICATION-TYPE
OBJECTS { ahAPId,
ahAPName,
ahObjectName, -- Failed object name
ahSeverity,
ahProbableCause,
ahFailureSet,
ahCode,
ahTrapDesc }
STATUS current
DESCRIPTION "This event is generated for any equipment or software failures.
"
::= { ahTrapModule 1 }
ahThresholdCrossingEvent NOTIFICATION-TYPE
OBJECTS { ahAPId,
ahAPName,
ahObjectName, -- Threshold name
ahCurValue,
ahThresholdHigh,
ahThresholdLow,
ahCode,
ahTrapDesc }
STATUS current
DESCRIPTION "This event is generated whenever a threshold is crossed for the first time."
::= { ahTrapModule 2 }
ahStateChangeEvent NOTIFICATION-TYPE
OBJECTS { ahAPId,
ahAPName,
ahObjectName, -- The object changes state
ahPreviousState,
ahCurrentState,
ahCode,
ahTrapDesc }
STATUS current
DESCRIPTION "This event is generated whenever an object state change occurs."
::= { ahTrapModule 3}
ahConnectionChangeEvent NOTIFICATION-TYPE
OBJECTS { ahAPId,
ahAPName,
ahObjectName,
ahIfIndex, -- Interface index detecting the client/neighbor
ahObjectType, -- Client connection or neighbor connection
ahRemoteId, -- MAC addr for the client or neighbour
ahCurrentState, -- up, or down.
ahSSID, -- ssid of the client is using if remoteid is a client
ahCLientIP, -- Client IP address if the remote id is a client
ahClientHostName, -- Client Host Name if the remote id is a client
ahClientUserName, -- Client User Name if the remote id is a client
ahClientAuthMethod, -- The authentication method the client uses to communicate with the HiveAP
ahClientEncryptionMethod, -- The encryption method the client uses to communicate with the HiveAP
ahClientMACProtocol, -- The radio mode the client uses to communicate with the HiveAP
ahClientVLAN, -- The VLAN used by client to communicate with the HiveAP
ahClientUserProfId, -- The user profile id used by client to communicate with the HiveAP
ahClientChannel, -- The radio channel used by client to communicate with the HiveAP
ahClientCWPUsed, -- The boolean indicating whether Captive Web Portal is used
ahBSSID, -- Basic Service Set Identifier of the client is using if remoteid is a client.
ahAssociationTime, -- The association time(s) of client connect or disconnect to AP.
ahIfName, -- The interface name of client connect or disconnect to AP.
ahIDPRSSI, -- RSSI information
ahCode,
ahTrapDesc }
STATUS current
DESCRIPTION "This event is generated whenever a connection state change
occurs. The connection might be between a HiveAP and its client,
or between a HiveAP and a neighboring HiveAP."
::= { ahTrapModule 4}
ahIDPStationEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahIfIndex, -- interface index detecting the IDP-AP
ahObjectName,
ahStationType, -- indicating whether it is an AP or client PC event
ahRemoteId, -- MAC addr for the IDP-AP
ahIDPType, -- IDP type
ahIDPChannel, -- channel number detected
ahIDPRSSI, -- RSSI information
ahIDPStationData, -- Station data received (related to the policies)
ahIDPCompliance,
ahSSID,
ahRemoved,
ahIDPInNet,
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "This event is generated whenever IDP detects an AP
in its neighborhood. The ahRomoteId indicates the detected AP
MAC address, and the ahIDPCompliance indicates conformance of
IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI
indicates the radio channel and Receive Signal Strenth Indication."
::= { ahTrapModule 5}
ahClientInfoEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahObjectName, -- reporting object name
ahSSID, -- ssid of the client is using
ahClientMAC, -- Client MAC address
ahCLientIP, -- Client IP address
ahClientHostName, -- Client Host Name
ahClientUserName, -- Client User Name
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "This event is generated whenever HiveAP a new client
makes an association and its IP address, hostname, and
User name is obtained."
::= { ahTrapModule 6}
ahPoEEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- Reporting APID
ahAPName, -- Reporting HiveAP name
ahObjectName, -- Reporting object name
ahPowerSrc, -- Power source: adaptor, PoE
ahPoEEth0On, -- On/Off
ahPoEEth0Pwr, -- Power level in watts
ahPoEEth0MaxSpeed, -- Maximum line speed
ahPoEWifi0Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
ahPoEEth1On, -- On/Off
ahPoEEth1Pwr, -- Power level in watts
ahPoEEth1MaxSpeed, -- Maximum line speed
ahPoEWifi1Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
ahPoEWifi2Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "This event is generated whenever a HiveAP (802.11n
product line) boots up or changes power levels."
::= { ahTrapModule 7}
ahChannelPowerChangeEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- Reporting APID
ahAPName, -- Reporting HiveAP name
ahObjectName, -- Reporting object name - interface name
ahIfIndex, -- Interface index reporting the channel/pwr change
ahRadioChannel, -- Current channel number in use
ahRadioTxPower, -- Current transmit power in use
ahBeaconInterval, -- Current beacon interval in use
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "This event is generated whenever a HiveAP boots up,
or changes channels or power levels."
::= { ahTrapModule 8}
ahIDPMitigateEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahIfIndex, -- interface index detecting the IDP-AP
ahObjectName, -- Reporting object name
ahRemoteId, -- MAC addr for the IDP-Station
ahBSSID, -- Basic Service Set Identifier of the rogue AP
ahDiscoverAge,
ahUpdateAge,
ahRemoved,
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "This event is generated whenever IDP detects an rogue client
connect to a rogue AP. The ahRomoteId indicates the detected
Station MAC address. "
::= { ahTrapModule 9}
ahInterferenceMapAlertEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahIfIndex, -- interface index
ahObjectName, -- Reporting object name
ahInterferenceThreshold, --the configured channel utilizations interference threshold
ahRunningAverageInterference, --channel utilizations running average interference
ahShortTermInterference, --channel utilizations short term interference
ahSnapshotInterference, --channel utilizations snapshot interference
ahCRCErrRateThreshold, -- the configured CRC error rate threshold
ahCRCErrRate, -- CRC error rate
ahSeverity,
ahFailureSet, -- indicate whether this is an interference alert or clear alert
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "For every one minute interval, AP will monitor the interference channel utilizations
(snapshot, short term means average and running average) and CRC error rate
against their thresholds, if any one of them is above their threshold
(thresholds are settable by CLI), AP should send HM an interference alert event to HM.
AP will send out clear alert to HM only when: the last short term period<6F><64>s CRC_error_rate,
means average Interference CU and the last snapshot interference CU are all below their thresholds."
::= { ahTrapModule 10}
ahBandwidthSentinelEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahIfIndex, -- interface index
ahObjectName, -- Reporting object name
ahClientMAC, -- Client MAC address
ahBandwidthSentinelStatus, --Bandwidth sentinel status
ahGuaranteedBandwidth, --Configured guaranteed-bandwidth
ahActualBandwidth, --Actual bandwidth usage
ahBandwidthSentinelAction, --Bandwidth sentinel action
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
The <20><>alert<72><74> trap will serve the purpose to tell HM that the client is violating the bandwidth sentinel,
the <20><>clear<61><72> trap will clear the previous <20><>alert<72><74> trap."
::= { ahTrapModule 11}
ahAlarmMsgMapAlertEvent NOTIFICATION-TYPE
OBJECTS { ahAPId, -- reporting APID
ahAPName, -- reporting AP name
ahIfIndex, -- the wifi interface index
ahObjectName, -- Reporting object name
ahLevel, -- the level will tell HM whether this is a interface or client level alert
ahClientMAC, -- Client MAC address, if it is client level alert type
ahSSID, -- the Client ssid name, if client level, include the SSID name, interface level, no ssid name
ahAlarmAlertType, -- the CRC error rate, the TX drop/retry rate, the RX rate, Airtime consumption
ahThresholdValue, -- the value of HOS setting
ahShortTermValue, -- the CRC error rate, TX drop/retry rate, RX drop rate percentage of this sampling period
ahSnapshotValue, -- the CRC error rate, TX drop/retry rate, RX drop rate of snapshort
ahFailureSet, -- indicate whether this is an alert or clear alert
ahCode,
ahTrapDesc}
STATUS current
DESCRIPTION "HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type,
the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised,
with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared."
::= { ahTrapModule 12}
--
-- Types
--
ahAPId OBJECT-TYPE
SYNTAX AhNodeID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is the node ID (MAC address in hexadecimal format)
of the HiveAP where the trap is generated. If a HiveAP is
configured with 2 hives, the node ID is the first MAC address
of the management interface."
::= {ahNotificationVarBind 1}
ahAPName OBJECT-TYPE
SYNTAX AhString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The host name of the HiveAP where the trap is generated."
::= { ahNotificationVarBind 2}
ahSeverity OBJECT-TYPE
SYNTAX INTEGER {
critical (5), -- service impact problem
major (4), -- Problem requiring user intervension
minor (3), -- Problem not requiring user intervension
info (2), -- informational only
undetermined (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the serverity of the trap."
::= { ahNotificationVarBind 3}
ahObjectName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64) )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It describes the object for which the trap is generated."
::= { ahNotificationVarBind 4}
ahProbableCause OBJECT-TYPE
SYNTAX AhProbableCause
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It describes the probable cause of a problem."
::= { ahNotificationVarBind 5}
ahCurValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the current value of a threshold counter."
::= { ahNotificationVarBind 6}
ahThresholdHigh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the value for a high threshold."
::= { ahNotificationVarBind 7}
ahThresholdLow OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the value for a low threshold."
::= { ahNotificationVarBind 8}
ahPreviousState OBJECT-TYPE
SYNTAX AhState
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the value for a previous state."
::= { ahNotificationVarBind 9}
ahCurrentState OBJECT-TYPE
SYNTAX AhState
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the value for the current state."
::= { ahNotificationVarBind 10}
ahTrapDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the description of the trap."
::= { ahNotificationVarBind 11}
ahCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains access information to the Aerohive
logging/action dictionary."
::= { ahNotificationVarBind 12}
ahIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface index used to identify uniquely
an interface (logical or physical)."
::= { ahNotificationVarBind 13}
ahObjectType OBJECT-TYPE
SYNTAX INTEGER {
clientLink (1), -- Client link
neighborLink (2) -- Neighbor link
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It specifies the object type: a client link or a neighbor link."
::= { ahNotificationVarBind 14}
ahRemoteId OBJECT-TYPE
SYNTAX AhNodeID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is the MAC address of the remote node. If the remote
node is a HiveAP, the ID must be the MAC address
of its management interface. If the remote node is a
client station, it must be the MAC address of the client."
::= {ahNotificationVarBind 15}
ahIDPType OBJECT-TYPE
SYNTAX INTEGER {
rogue (1),
valid (2),
external (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is used to indicate the AP identified is a
rogue, or valid, or compliant, or noncompliant, or external AP."
::= {ahNotificationVarBind 16}
ahIDPChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is the channel number used by the identified AP."
::= {ahNotificationVarBind 17}
ahIDPRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is the RSSI for the identified AP or Client."
::= {ahNotificationVarBind 18}
ahIDPCompliance OBJECT-TYPE
SYNTAX INTEGER {
open_policy (1),
wep_policy (2),
wpa_policy (4),
wmm_policy (8),
oui_policy (16),
ssid_policy (32),
short_preamble_policy (64),
short_beacon_policy (128),
ad_hoc_policy (256)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is bit mask to indicate which policy the indentified
AP is compliant with (bit is set if it is NOT compliant)."
::= {ahNotificationVarBind 19}
ahSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32) )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the SSID name for the detected AP."
::= { ahNotificationVarBind 20}
ahStationType OBJECT-TYPE
SYNTAX INTEGER {
station_ap (1),
station_client (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates whether it is event for a peer AP
or client PC"
::= { ahNotificationVarBind 21}
ahIDPStationData OBJECT-TYPE
SYNTAX INTEGER {
open_policy (1),
wep_policy (2),
wpa_policy (4),
wmm_policy (8),
short_preamble_policy (64),
short_beacon_policy (128),
ad_hoc_policy (256)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It is bit mask to indicate policies are detected for
the identified AP . Note: the oui_policy and ssid_policy are
omitted due to the presence of the ahRemoteID, and SSID in the
trap message. "
::= {ahNotificationVarBind 22}
ahRemoved OBJECT-TYPE
SYNTAX INTEGER {
removed_false (0),
removed_true (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates whether the AP or client can not
be detected."
::= { ahNotificationVarBind 23}
ahClientMAC OBJECT-TYPE
SYNTAX AhNodeID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the MAC address of the wireless client. It is
required."
::= { ahNotificationVarBind 24}
ahCLientIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the IP address of the wireless client. It is
optional."
::= { ahNotificationVarBind 25}
ahClientHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the host name of the wireless client. It is
optional."
::= { ahNotificationVarBind 26}
ahClientUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It contains the user name of the wireless client. It is
optional."
::= { ahNotificationVarBind 27}
ahPowerSrc OBJECT-TYPE
SYNTAX INTEGER {
adaptor (0),
poe (1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates whether the power source is from the power adaptor or PoE.
If the power source is the adaptor, PoE information in the trap is ignored."
::= { ahNotificationVarBind 28}
ahPoEEth0On OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates whether PoE is on eth0 or not."
::= { ahNotificationVarBind 29}
ahPoEEth0Pwr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates the power level of PoE in watts
multiply by 10."
::= { ahNotificationVarBind 30}
ahPoEEth1On OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates whether PoE is on eth1 or not."
::= { ahNotificationVarBind 31}
ahPoEEth1Pwr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "It indicates the power level of PoE on eht1 in watts
multiply by 10."
::= { ahNotificationVarBind 32}
ahRadioChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the channel number currently in use for this radio."
::= { ahNotificationVarBind 33 }
ahRadioTxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the transmit power in dBm that the radio is currently using. The range
is 0 to 20 dBm."
::= { ahNotificationVarBind 34 }
ahClientAuthMethod OBJECT-TYPE
SYNTAX AhAuthenticationMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the authentication method the client uses when
communicating with the HiveAP."
::= { ahNotificationVarBind 35 }
ahClientEncryptionMethod OBJECT-TYPE
SYNTAX AhEncrytionMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the encryption method the client uses when communicating
with the HiveAP."
::= { ahNotificationVarBind 36 }
ahClientMACProtocol OBJECT-TYPE
SYNTAX AhMACProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the radio mode the client uses when communicating
with the HiveAP."
::= { ahNotificationVarBind 37 }
ahClientVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the VLAN that the client uses when communicating
with the HiveAP."
::= { ahNotificationVarBind 38 }
ahClientUserProfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the user profile ID that the client uses when communicating
with the HiveAP."
::= { ahNotificationVarBind 39 }
ahClientChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the radio channel that the client uses when communicating
with the HiveAP."
::= { ahNotificationVarBind 40 }
ahClientCWPUsed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the Boolean datatype indicating whether a captive web portal
is used."
::= { ahNotificationVarBind 41 }
ahBSSID OBJECT-TYPE
SYNTAX AhNodeID
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the basic service set identifier of the client
if the ahRemoteId is a client."
::= { ahNotificationVarBind 42 }
ahPoEEth0MaxSpeed OBJECT-TYPE
SYNTAX INTEGER {
linkdown (1), -- Interface down
eth10 (2), -- 10 Mbps
eth100 (3), -- 100 Mbps
eth1000 (4) -- 1000 Mbps
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the automatically adjusted maximum Ethernet speed
based on the power source and level."
::= { ahNotificationVarBind 43 }
ahPoEEth1MaxSpeed OBJECT-TYPE
SYNTAX INTEGER {
linkdown (1), -- Interface shutdown
eth10 (2), -- 10 Mbps
eth100 (3), -- 100 Mbps
eth1000 (4) -- 1000 Mbps
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the automatically adjusted maximum Ethernet speed
based on the power source and level."
::= { ahNotificationVarBind 44 }
ahPoEWifi0Setting OBJECT-TYPE
SYNTAX INTEGER {
invalid (0), -- Interface is invalid
linkdown (1), -- Interface shutdown
config (2), -- User configured Wi-Fi tx-rx chain
tx2rx3 (3) -- Maximum transmit chain 2 and max. receive chain 3
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
power source and power level."
::= { ahNotificationVarBind 45 }
ahPoEWifi1Setting OBJECT-TYPE
SYNTAX INTEGER {
invalid (0), -- Interface is invalid
linkdown (1), -- Interface shutdown
config (2), -- User configured Wi-Fi tx-rx chain
tx2rx3 (3) -- Maximum transmit chain 2 and maximum receive chain 3
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
power source and power level."
::= { ahNotificationVarBind 46 }
ahPoEWifi2Setting OBJECT-TYPE
SYNTAX INTEGER {
invalid (0), -- Interface is invalid
linkdown (1), -- Interface shutdown
config (2), -- User configured Wi-Fi tx-rx chain
tx2rx3 (3) -- Maximum transmit chain 2 and maximum receive chain 3
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
power source and power level."
::= { ahNotificationVarBind 47 }
ahAssociationTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The association time(s) of client connect or disconnect to AP."
::= { ahNotificationVarBind 48 }
ahIDPInNet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the Boolean datatype indicating whether AP is in local network."
::= { ahNotificationVarBind 49 }
ahDiscoverAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the age from the rogue client is discovered."
::= { ahNotificationVarBind 50 }
ahUpdateAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the age from the rogue client is updated."
::= { ahNotificationVarBind 51 }
ahRunningAverageInterference OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channel utilizations running average interference."
::= { ahNotificationVarBind 52 }
ahShortTermInterference OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channel utilizations short term interference.
The short term period is defined by CLI config,
usually, it should be in the range of 5 minutes to 30 minutes. "
::= { ahNotificationVarBind 53 }
ahSnapshotInterference OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "channel utilizations snapshot interference. it is the last minute<74><65>s means average."
::= { ahNotificationVarBind 54 }
ahFailureSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the Boolean datatype indicating whether this failure(alert) is on or off."
::= { ahNotificationVarBind 55 }
ahInterferenceThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the configured channel utilizations interference threshold.
it is defined by CLI config."
::= { ahNotificationVarBind 56 }
ahCRCErrRateThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the configured CRC error rate threshold. it is defined by CLI config."
::= { ahNotificationVarBind 57 }
ahCRCErrRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "short term CRC error rate. The interval of the refresh of CRC error rate calculation
is the same interval as channel utilization short term means average interval."
::= { ahNotificationVarBind 58 }
ahBandwidthSentinelStatus OBJECT-TYPE
SYNTAX INTEGER {
alert (0), -- good client but does not meet sla
clear (1), -- good client and meet sla
bad (2) -- bad client
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bandwidth sentinel status.
In alert message, the value should be zero. In clear message, the value should be 1."
::= { ahNotificationVarBind 59 }
ahGuaranteedBandwidth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the configured guaranteed bandwidth(Kbps). it is defined by CLI config."
::= { ahNotificationVarBind 60 }
ahActualBandwidth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the actual bandwidth(Kbps)."
::= { ahNotificationVarBind 61 }
ahBandwidthSentinelAction OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "bit maps to indicate which action has been taken on this client.
bit 0: indicate whether log the guaranteed bandwidth violation or not,
bit 1: indicate whether add more token to meet the minimum guaranteed bandwidth or not."
::= { ahNotificationVarBind 62 }
ahBeaconInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "It is the number of time units between Beacon transmissions, One time unit is
1024 microseconds."
::= { ahNotificationVarBind 63 }
ahLevel OBJECT-TYPE
SYNTAX INTEGER {
interface (1), -- a interface level alert
client (2) -- a client level alert
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The level value will tell HM whether this is an interface level alert or a client alert."
::= {ahNotificationVarBind 64}
ahAlarmAlertType OBJECT-TYPE
SYNTAX INTEGER {
crcrate (0), -- The CRC error rate only applies to interface level alert
txdroprate (1), -- The TX drop rate is calculated based on the max retried TX frames over total unicast TX frames
txretryrate (2), -- The TX retry rate is calculated based on the total retries over total unicast TX frames
rxdroprate (3), -- The RX drop rate is calculated based on the dropped RX frames over total RX frames
airtime (4) -- The The airtime percentage is the sum of both TX and RX airtime percentages
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "There are five types, CRC Rate only applies to interface level alert,
TX drop/retry rate is is calculated based on retries over total unicast TX frames,
RX drop rate is calculated based on the dropped RX frames over total RX frames,
Airtime percentage is the sum of both TX and RX airtime percentages."
::= {ahNotificationVarBind 65}
ahThresholdValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config."
::= {ahNotificationVarBind 66}
ahShortTermValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate."
::= {ahNotificationVarBind 67}
ahSnapshotValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the snapshot value of CRC error rate, TX drop/retry rate, RX drop rate."
::= {ahNotificationVarBind 68}
ahIfName OBJECT-TYPE
SYNTAX AhString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name - uniquely identifies an AP Interface."
::= {ahNotificationVarBind 69}
END
Reference in New Issue Copy Permalink