945 lines
39 KiB
Plaintext
945 lines
39 KiB
Plaintext
--
|
||
-- Copyright (c) 2006-2013, Aerohive Networks, Inc
|
||
-- All rights reserved.
|
||
|
||
AH_TRAP_MIB DEFINITIONS ::= BEGIN
|
||
|
||
--
|
||
-- Imports
|
||
--
|
||
|
||
IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
|
||
FROM SNMPv2-SMI
|
||
DisplayString
|
||
FROM SNMPv2-TC
|
||
ahAPTrap, AhString, AhNodeID, AhMACProtocol FROM AH-SMI-MIB;
|
||
|
||
--
|
||
-- Module Identity
|
||
--
|
||
|
||
|
||
AhAuthenticationMethod ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION "Authentication method supported by the HiveAP"
|
||
SYNTAX INTEGER {
|
||
cwp (0),
|
||
open (1),
|
||
wep-open (2),
|
||
wep-shared (3),
|
||
wpa-psk (4),
|
||
wpa2-psk (5),
|
||
wpa-8021x (6),
|
||
wpa2-8021X (7),
|
||
wpa-auto-psk (8),
|
||
wpa-auto-8021x (9),
|
||
dynamic-wep (10),
|
||
8021x (11)
|
||
}
|
||
|
||
AhEncrytionMethod ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION "Encryption method supported by the HiveAP"
|
||
SYNTAX INTEGER {
|
||
AES (0),
|
||
TKIP (1),
|
||
WEP (2),
|
||
Non (3)
|
||
}
|
||
|
||
|
||
ahTrapModule MODULE-IDENTITY
|
||
LAST-UPDATED "201608310000Z" -- Aug 31, 2016
|
||
ORGANIZATION "Aerohive Networks, Inc."
|
||
CONTACT-INFO "See AH-SMI-MIB for information."
|
||
DESCRIPTION
|
||
"This is the MIB module for access point trap definitions
|
||
for Aerohive Networks Inc."
|
||
|
||
::= { ahAPTrap 1 }
|
||
|
||
ahNotificationVarBind OBJECT IDENTIFIER ::= { ahAPTrap 2 }
|
||
|
||
AhState ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION "It defines the state for interfaces."
|
||
SYNTAX INTEGER {
|
||
ahUp (1), -- Interface up
|
||
ahDown (2) -- Interface down
|
||
}
|
||
|
||
AhProbableCause ::= TEXTUAL-CONVENTION
|
||
STATUS current
|
||
DESCRIPTION "It defines the probable cause for a problem on the HiveAP."
|
||
SYNTAX INTEGER {
|
||
ahClear (0),
|
||
ahUnknown (1),
|
||
ahFlashFailure (2),
|
||
ahFanFailure (3),
|
||
ahPowerSupplyFailure (4),
|
||
ahSoftwareUpgradeFailure (5),
|
||
ahRadioFailure (6),
|
||
ahConfFailure (7)
|
||
}
|
||
|
||
--
|
||
-- Trap Definitions
|
||
--
|
||
|
||
ahFailureTrap NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId,
|
||
ahAPName,
|
||
ahObjectName, -- Failed object name
|
||
ahSeverity,
|
||
ahProbableCause,
|
||
ahFailureSet,
|
||
ahCode,
|
||
ahTrapDesc }
|
||
STATUS current
|
||
DESCRIPTION "This event is generated for any equipment or software failures.
|
||
"
|
||
::= { ahTrapModule 1 }
|
||
|
||
ahThresholdCrossingEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId,
|
||
ahAPName,
|
||
ahObjectName, -- Threshold name
|
||
ahCurValue,
|
||
ahThresholdHigh,
|
||
ahThresholdLow,
|
||
ahCode,
|
||
ahTrapDesc }
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever a threshold is crossed for the first time."
|
||
::= { ahTrapModule 2 }
|
||
|
||
ahStateChangeEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId,
|
||
ahAPName,
|
||
ahObjectName, -- The object changes state
|
||
ahPreviousState,
|
||
ahCurrentState,
|
||
ahCode,
|
||
ahTrapDesc }
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever an object state change occurs."
|
||
::= { ahTrapModule 3}
|
||
|
||
|
||
ahConnectionChangeEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId,
|
||
ahAPName,
|
||
ahObjectName,
|
||
ahIfIndex, -- Interface index detecting the client/neighbor
|
||
ahObjectType, -- Client connection or neighbor connection
|
||
ahRemoteId, -- MAC addr for the client or neighbour
|
||
ahCurrentState, -- up, or down.
|
||
ahSSID, -- ssid of the client is using if remoteid is a client
|
||
ahCLientIP, -- Client IP address if the remote id is a client
|
||
ahClientHostName, -- Client Host Name if the remote id is a client
|
||
ahClientUserName, -- Client User Name if the remote id is a client
|
||
ahClientAuthMethod, -- The authentication method the client uses to communicate with the HiveAP
|
||
ahClientEncryptionMethod, -- The encryption method the client uses to communicate with the HiveAP
|
||
ahClientMACProtocol, -- The radio mode the client uses to communicate with the HiveAP
|
||
ahClientVLAN, -- The VLAN used by client to communicate with the HiveAP
|
||
ahClientUserProfId, -- The user profile id used by client to communicate with the HiveAP
|
||
ahClientChannel, -- The radio channel used by client to communicate with the HiveAP
|
||
ahClientCWPUsed, -- The boolean indicating whether Captive Web Portal is used
|
||
ahBSSID, -- Basic Service Set Identifier of the client is using if remoteid is a client.
|
||
ahAssociationTime, -- The association time(s) of client connect or disconnect to AP.
|
||
ahIfName, -- The interface name of client connect or disconnect to AP.
|
||
ahIDPRSSI, -- RSSI information
|
||
ahCode,
|
||
ahTrapDesc }
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever a connection state change
|
||
occurs. The connection might be between a HiveAP and its client,
|
||
or between a HiveAP and a neighboring HiveAP."
|
||
::= { ahTrapModule 4}
|
||
|
||
ahIDPStationEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahIfIndex, -- interface index detecting the IDP-AP
|
||
ahObjectName,
|
||
ahStationType, -- indicating whether it is an AP or client PC event
|
||
ahRemoteId, -- MAC addr for the IDP-AP
|
||
ahIDPType, -- IDP type
|
||
ahIDPChannel, -- channel number detected
|
||
ahIDPRSSI, -- RSSI information
|
||
ahIDPStationData, -- Station data received (related to the policies)
|
||
ahIDPCompliance,
|
||
ahSSID,
|
||
ahRemoved,
|
||
ahIDPInNet,
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever IDP detects an AP
|
||
in its neighborhood. The ahRomoteId indicates the detected AP
|
||
MAC address, and the ahIDPCompliance indicates conformance of
|
||
IDP policy this AP satisfies. The ahIDPChannel and ahIDPRSSI
|
||
indicates the radio channel and Receive Signal Strenth Indication."
|
||
::= { ahTrapModule 5}
|
||
|
||
ahClientInfoEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahObjectName, -- reporting object name
|
||
ahSSID, -- ssid of the client is using
|
||
ahClientMAC, -- Client MAC address
|
||
ahCLientIP, -- Client IP address
|
||
ahClientHostName, -- Client Host Name
|
||
ahClientUserName, -- Client User Name
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever HiveAP a new client
|
||
makes an association and its IP address, hostname, and
|
||
User name is obtained."
|
||
::= { ahTrapModule 6}
|
||
|
||
ahPoEEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- Reporting APID
|
||
ahAPName, -- Reporting HiveAP name
|
||
ahObjectName, -- Reporting object name
|
||
ahPowerSrc, -- Power source: adaptor, PoE
|
||
ahPoEEth0On, -- On/Off
|
||
ahPoEEth0Pwr, -- Power level in watts
|
||
ahPoEEth0MaxSpeed, -- Maximum line speed
|
||
ahPoEWifi0Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
|
||
ahPoEEth1On, -- On/Off
|
||
ahPoEEth1Pwr, -- Power level in watts
|
||
ahPoEEth1MaxSpeed, -- Maximum line speed
|
||
ahPoEWifi1Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
|
||
ahPoEWifi2Setting, -- Auto, 2X3 (xmit/rcv-chain), linkdown
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever a HiveAP (802.11n
|
||
product line) boots up or changes power levels."
|
||
::= { ahTrapModule 7}
|
||
|
||
ahChannelPowerChangeEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- Reporting APID
|
||
ahAPName, -- Reporting HiveAP name
|
||
ahObjectName, -- Reporting object name - interface name
|
||
ahIfIndex, -- Interface index reporting the channel/pwr change
|
||
ahRadioChannel, -- Current channel number in use
|
||
ahRadioTxPower, -- Current transmit power in use
|
||
ahBeaconInterval, -- Current beacon interval in use
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever a HiveAP boots up,
|
||
or changes channels or power levels."
|
||
::= { ahTrapModule 8}
|
||
|
||
|
||
ahIDPMitigateEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahIfIndex, -- interface index detecting the IDP-AP
|
||
ahObjectName, -- Reporting object name
|
||
ahRemoteId, -- MAC addr for the IDP-Station
|
||
ahBSSID, -- Basic Service Set Identifier of the rogue AP
|
||
ahDiscoverAge,
|
||
ahUpdateAge,
|
||
ahRemoved,
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "This event is generated whenever IDP detects an rogue client
|
||
connect to a rogue AP. The ahRomoteId indicates the detected
|
||
Station MAC address. "
|
||
::= { ahTrapModule 9}
|
||
|
||
ahInterferenceMapAlertEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahIfIndex, -- interface index
|
||
ahObjectName, -- Reporting object name
|
||
ahInterferenceThreshold, --the configured channel utilizations interference threshold
|
||
ahRunningAverageInterference, --channel utilizations running average interference
|
||
ahShortTermInterference, --channel utilizations short term interference
|
||
ahSnapshotInterference, --channel utilizations snapshot interference
|
||
ahCRCErrRateThreshold, -- the configured CRC error rate threshold
|
||
ahCRCErrRate, -- CRC error rate
|
||
ahSeverity,
|
||
ahFailureSet, -- indicate whether this is an interference alert or clear alert
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "For every one minute interval, AP will monitor the interference channel utilizations
|
||
(snapshot, short term means average and running average) and CRC error rate
|
||
against their thresholds, if any one of them is above their threshold
|
||
(thresholds are settable by CLI), AP should send HM an interference alert event to HM.
|
||
AP will send out clear alert to HM only when: the last short term period<6F><64>s CRC_error_rate,
|
||
means average Interference CU and the last snapshot interference CU are all below their thresholds."
|
||
::= { ahTrapModule 10}
|
||
|
||
ahBandwidthSentinelEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahIfIndex, -- interface index
|
||
ahObjectName, -- Reporting object name
|
||
ahClientMAC, -- Client MAC address
|
||
ahBandwidthSentinelStatus, --Bandwidth sentinel status
|
||
ahGuaranteedBandwidth, --Configured guaranteed-bandwidth
|
||
ahActualBandwidth, --Actual bandwidth usage
|
||
ahBandwidthSentinelAction, --Bandwidth sentinel action
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "HiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap.
|
||
The <20><>alert<72><74> trap will serve the purpose to tell HM that the client is violating the bandwidth sentinel,
|
||
the <20><>clear<61><72> trap will clear the previous <20><>alert<72><74> trap."
|
||
::= { ahTrapModule 11}
|
||
|
||
ahAlarmMsgMapAlertEvent NOTIFICATION-TYPE
|
||
OBJECTS { ahAPId, -- reporting APID
|
||
ahAPName, -- reporting AP name
|
||
ahIfIndex, -- the wifi interface index
|
||
ahObjectName, -- Reporting object name
|
||
ahLevel, -- the level will tell HM whether this is a interface or client level alert
|
||
ahClientMAC, -- Client MAC address, if it is client level alert type
|
||
ahSSID, -- the Client ssid name, if client level, include the SSID name, interface level, no ssid name
|
||
ahAlarmAlertType, -- the CRC error rate, the TX drop/retry rate, the RX rate, Airtime consumption
|
||
ahThresholdValue, -- the value of HOS setting
|
||
ahShortTermValue, -- the CRC error rate, TX drop/retry rate, RX drop rate percentage of this sampling period
|
||
ahSnapshotValue, -- the CRC error rate, TX drop/retry rate, RX drop rate of snapshort
|
||
ahFailureSet, -- indicate whether this is an alert or clear alert
|
||
ahCode,
|
||
ahTrapDesc}
|
||
|
||
STATUS current
|
||
DESCRIPTION "HiveOS will send two different kinds of level alert: interface level alert, and client level alert.
|
||
There are four alert types, CRC error rate, TX drop/retry rate, Rx drop rate; interface level includes all alert type,
|
||
the client level includes Tx drop/retry rate, Rx drop Rate; the 'set' alert means there is an alert raised,
|
||
with type indicated in the alert type field, the 'clear' alert means the previous alert condition has been cleared."
|
||
::= { ahTrapModule 12}
|
||
--
|
||
-- Types
|
||
--
|
||
|
||
ahAPId OBJECT-TYPE
|
||
SYNTAX AhNodeID
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is the node ID (MAC address in hexadecimal format)
|
||
of the HiveAP where the trap is generated. If a HiveAP is
|
||
configured with 2 hives, the node ID is the first MAC address
|
||
of the management interface."
|
||
::= {ahNotificationVarBind 1}
|
||
|
||
ahAPName OBJECT-TYPE
|
||
SYNTAX AhString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "The host name of the HiveAP where the trap is generated."
|
||
::= { ahNotificationVarBind 2}
|
||
|
||
ahSeverity OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
critical (5), -- service impact problem
|
||
major (4), -- Problem requiring user intervension
|
||
minor (3), -- Problem not requiring user intervension
|
||
info (2), -- informational only
|
||
undetermined (1)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the serverity of the trap."
|
||
::= { ahNotificationVarBind 3}
|
||
|
||
ahObjectName OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE (0..64) )
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It describes the object for which the trap is generated."
|
||
::= { ahNotificationVarBind 4}
|
||
|
||
ahProbableCause OBJECT-TYPE
|
||
SYNTAX AhProbableCause
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It describes the probable cause of a problem."
|
||
::= { ahNotificationVarBind 5}
|
||
|
||
ahCurValue OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the current value of a threshold counter."
|
||
::= { ahNotificationVarBind 6}
|
||
|
||
ahThresholdHigh OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the value for a high threshold."
|
||
::= { ahNotificationVarBind 7}
|
||
|
||
ahThresholdLow OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the value for a low threshold."
|
||
::= { ahNotificationVarBind 8}
|
||
|
||
ahPreviousState OBJECT-TYPE
|
||
SYNTAX AhState
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the value for a previous state."
|
||
::= { ahNotificationVarBind 9}
|
||
|
||
ahCurrentState OBJECT-TYPE
|
||
SYNTAX AhState
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the value for the current state."
|
||
::= { ahNotificationVarBind 10}
|
||
|
||
ahTrapDesc OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the description of the trap."
|
||
::= { ahNotificationVarBind 11}
|
||
|
||
ahCode OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains access information to the Aerohive
|
||
logging/action dictionary."
|
||
::= { ahNotificationVarBind 12}
|
||
|
||
ahIfIndex OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "The interface index used to identify uniquely
|
||
an interface (logical or physical)."
|
||
::= { ahNotificationVarBind 13}
|
||
|
||
|
||
ahObjectType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
clientLink (1), -- Client link
|
||
neighborLink (2) -- Neighbor link
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It specifies the object type: a client link or a neighbor link."
|
||
::= { ahNotificationVarBind 14}
|
||
|
||
ahRemoteId OBJECT-TYPE
|
||
SYNTAX AhNodeID
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is the MAC address of the remote node. If the remote
|
||
node is a HiveAP, the ID must be the MAC address
|
||
of its management interface. If the remote node is a
|
||
client station, it must be the MAC address of the client."
|
||
::= {ahNotificationVarBind 15}
|
||
|
||
ahIDPType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
rogue (1),
|
||
valid (2),
|
||
external (3)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is used to indicate the AP identified is a
|
||
rogue, or valid, or compliant, or noncompliant, or external AP."
|
||
::= {ahNotificationVarBind 16}
|
||
|
||
ahIDPChannel OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is the channel number used by the identified AP."
|
||
::= {ahNotificationVarBind 17}
|
||
|
||
ahIDPRSSI OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is the RSSI for the identified AP or Client."
|
||
::= {ahNotificationVarBind 18}
|
||
|
||
ahIDPCompliance OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
open_policy (1),
|
||
wep_policy (2),
|
||
wpa_policy (4),
|
||
wmm_policy (8),
|
||
oui_policy (16),
|
||
ssid_policy (32),
|
||
short_preamble_policy (64),
|
||
short_beacon_policy (128),
|
||
ad_hoc_policy (256)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is bit mask to indicate which policy the indentified
|
||
AP is compliant with (bit is set if it is NOT compliant)."
|
||
::= {ahNotificationVarBind 19}
|
||
|
||
ahSSID OBJECT-TYPE
|
||
SYNTAX DisplayString (SIZE (0..32) )
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the SSID name for the detected AP."
|
||
::= { ahNotificationVarBind 20}
|
||
|
||
ahStationType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
station_ap (1),
|
||
station_client (2)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates whether it is event for a peer AP
|
||
or client PC"
|
||
::= { ahNotificationVarBind 21}
|
||
|
||
ahIDPStationData OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
open_policy (1),
|
||
wep_policy (2),
|
||
wpa_policy (4),
|
||
wmm_policy (8),
|
||
short_preamble_policy (64),
|
||
short_beacon_policy (128),
|
||
ad_hoc_policy (256)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It is bit mask to indicate policies are detected for
|
||
the identified AP . Note: the oui_policy and ssid_policy are
|
||
omitted due to the presence of the ahRemoteID, and SSID in the
|
||
trap message. "
|
||
::= {ahNotificationVarBind 22}
|
||
|
||
ahRemoved OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
removed_false (0),
|
||
removed_true (1)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates whether the AP or client can not
|
||
be detected."
|
||
::= { ahNotificationVarBind 23}
|
||
|
||
|
||
|
||
ahClientMAC OBJECT-TYPE
|
||
SYNTAX AhNodeID
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the MAC address of the wireless client. It is
|
||
required."
|
||
::= { ahNotificationVarBind 24}
|
||
|
||
ahCLientIP OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the IP address of the wireless client. It is
|
||
optional."
|
||
::= { ahNotificationVarBind 25}
|
||
|
||
ahClientHostName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the host name of the wireless client. It is
|
||
optional."
|
||
::= { ahNotificationVarBind 26}
|
||
|
||
ahClientUserName OBJECT-TYPE
|
||
SYNTAX DisplayString
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It contains the user name of the wireless client. It is
|
||
optional."
|
||
::= { ahNotificationVarBind 27}
|
||
|
||
ahPowerSrc OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
adaptor (0),
|
||
poe (1)
|
||
}
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates whether the power source is from the power adaptor or PoE.
|
||
If the power source is the adaptor, PoE information in the trap is ignored."
|
||
::= { ahNotificationVarBind 28}
|
||
|
||
ahPoEEth0On OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates whether PoE is on eth0 or not."
|
||
::= { ahNotificationVarBind 29}
|
||
|
||
ahPoEEth0Pwr OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates the power level of PoE in watts
|
||
multiply by 10."
|
||
::= { ahNotificationVarBind 30}
|
||
|
||
ahPoEEth1On OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates whether PoE is on eth1 or not."
|
||
::= { ahNotificationVarBind 31}
|
||
|
||
ahPoEEth1Pwr OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION "It indicates the power level of PoE on eht1 in watts
|
||
multiply by 10."
|
||
::= { ahNotificationVarBind 32}
|
||
|
||
ahRadioChannel OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the channel number currently in use for this radio."
|
||
::= { ahNotificationVarBind 33 }
|
||
|
||
ahRadioTxPower OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the transmit power in dBm that the radio is currently using. The range
|
||
is 0 to 20 dBm."
|
||
::= { ahNotificationVarBind 34 }
|
||
|
||
ahClientAuthMethod OBJECT-TYPE
|
||
SYNTAX AhAuthenticationMethod
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the authentication method the client uses when
|
||
communicating with the HiveAP."
|
||
::= { ahNotificationVarBind 35 }
|
||
|
||
ahClientEncryptionMethod OBJECT-TYPE
|
||
SYNTAX AhEncrytionMethod
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the encryption method the client uses when communicating
|
||
with the HiveAP."
|
||
::= { ahNotificationVarBind 36 }
|
||
|
||
ahClientMACProtocol OBJECT-TYPE
|
||
SYNTAX AhMACProtocol
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the radio mode the client uses when communicating
|
||
with the HiveAP."
|
||
::= { ahNotificationVarBind 37 }
|
||
|
||
ahClientVLAN OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the VLAN that the client uses when communicating
|
||
with the HiveAP."
|
||
::= { ahNotificationVarBind 38 }
|
||
|
||
|
||
ahClientUserProfId OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the user profile ID that the client uses when communicating
|
||
with the HiveAP."
|
||
::= { ahNotificationVarBind 39 }
|
||
|
||
ahClientChannel OBJECT-TYPE
|
||
SYNTAX Integer32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the radio channel that the client uses when communicating
|
||
with the HiveAP."
|
||
::= { ahNotificationVarBind 40 }
|
||
|
||
ahClientCWPUsed OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the Boolean datatype indicating whether a captive web portal
|
||
is used."
|
||
::= { ahNotificationVarBind 41 }
|
||
|
||
ahBSSID OBJECT-TYPE
|
||
SYNTAX AhNodeID
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the basic service set identifier of the client
|
||
if the ahRemoteId is a client."
|
||
::= { ahNotificationVarBind 42 }
|
||
|
||
ahPoEEth0MaxSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
linkdown (1), -- Interface down
|
||
eth10 (2), -- 10 Mbps
|
||
eth100 (3), -- 100 Mbps
|
||
eth1000 (4) -- 1000 Mbps
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the automatically adjusted maximum Ethernet speed
|
||
based on the power source and level."
|
||
::= { ahNotificationVarBind 43 }
|
||
|
||
ahPoEEth1MaxSpeed OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
linkdown (1), -- Interface shutdown
|
||
eth10 (2), -- 10 Mbps
|
||
eth100 (3), -- 100 Mbps
|
||
eth1000 (4) -- 1000 Mbps
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the automatically adjusted maximum Ethernet speed
|
||
based on the power source and level."
|
||
::= { ahNotificationVarBind 44 }
|
||
|
||
ahPoEWifi0Setting OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
invalid (0), -- Interface is invalid
|
||
linkdown (1), -- Interface shutdown
|
||
config (2), -- User configured Wi-Fi tx-rx chain
|
||
tx2rx3 (3) -- Maximum transmit chain 2 and max. receive chain 3
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
|
||
power source and power level."
|
||
::= { ahNotificationVarBind 45 }
|
||
|
||
ahPoEWifi1Setting OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
invalid (0), -- Interface is invalid
|
||
linkdown (1), -- Interface shutdown
|
||
config (2), -- User configured Wi-Fi tx-rx chain
|
||
tx2rx3 (3) -- Maximum transmit chain 2 and maximum receive chain 3
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
|
||
power source and power level."
|
||
::= { ahNotificationVarBind 46 }
|
||
|
||
ahPoEWifi2Setting OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
invalid (0), -- Interface is invalid
|
||
linkdown (1), -- Interface shutdown
|
||
config (2), -- User configured Wi-Fi tx-rx chain
|
||
tx2rx3 (3) -- Maximum transmit chain 2 and maximum receive chain 3
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the automatically adjusted Wi-Fi setting based on the
|
||
power source and power level."
|
||
::= { ahNotificationVarBind 47 }
|
||
|
||
ahAssociationTime OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "The association time(s) of client connect or disconnect to AP."
|
||
::= { ahNotificationVarBind 48 }
|
||
ahIDPInNet OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the Boolean datatype indicating whether AP is in local network."
|
||
::= { ahNotificationVarBind 49 }
|
||
|
||
ahDiscoverAge OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the age from the rogue client is discovered."
|
||
::= { ahNotificationVarBind 50 }
|
||
|
||
ahUpdateAge OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the age from the rogue client is updated."
|
||
::= { ahNotificationVarBind 51 }
|
||
|
||
ahRunningAverageInterference OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "channel utilizations running average interference."
|
||
::= { ahNotificationVarBind 52 }
|
||
|
||
ahShortTermInterference OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "channel utilizations short term interference.
|
||
The short term period is defined by CLI config,
|
||
usually, it should be in the range of 5 minutes to 30 minutes. "
|
||
::= { ahNotificationVarBind 53 }
|
||
|
||
ahSnapshotInterference OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "channel utilizations snapshot interference. it is the last minute<74><65>s means average."
|
||
::= { ahNotificationVarBind 54 }
|
||
|
||
ahFailureSet OBJECT-TYPE
|
||
SYNTAX TruthValue
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the Boolean datatype indicating whether this failure(alert) is on or off."
|
||
::= { ahNotificationVarBind 55 }
|
||
|
||
ahInterferenceThreshold OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the configured channel utilizations interference threshold.
|
||
it is defined by CLI config."
|
||
::= { ahNotificationVarBind 56 }
|
||
|
||
ahCRCErrRateThreshold OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the configured CRC error rate threshold. it is defined by CLI config."
|
||
::= { ahNotificationVarBind 57 }
|
||
|
||
ahCRCErrRate OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "short term CRC error rate. The interval of the refresh of CRC error rate calculation
|
||
is the same interval as channel utilization short term means average interval."
|
||
::= { ahNotificationVarBind 58 }
|
||
|
||
|
||
ahBandwidthSentinelStatus OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
alert (0), -- good client but does not meet sla
|
||
clear (1), -- good client and meet sla
|
||
bad (2) -- bad client
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "Bandwidth sentinel status.
|
||
In alert message, the value should be zero. In clear message, the value should be 1."
|
||
::= { ahNotificationVarBind 59 }
|
||
|
||
ahGuaranteedBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the configured guaranteed bandwidth(Kbps). it is defined by CLI config."
|
||
::= { ahNotificationVarBind 60 }
|
||
|
||
ahActualBandwidth OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the actual bandwidth(Kbps)."
|
||
::= { ahNotificationVarBind 61 }
|
||
|
||
ahBandwidthSentinelAction OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "bit maps to indicate which action has been taken on this client.
|
||
bit 0: indicate whether log the guaranteed bandwidth violation or not,
|
||
bit 1: indicate whether add more token to meet the minimum guaranteed bandwidth or not."
|
||
::= { ahNotificationVarBind 62 }
|
||
|
||
ahBeaconInterval OBJECT-TYPE
|
||
SYNTAX Counter32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "It is the number of time units between Beacon transmissions, One time unit is
|
||
1024 microseconds."
|
||
::= { ahNotificationVarBind 63 }
|
||
|
||
ahLevel OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
interface (1), -- a interface level alert
|
||
client (2) -- a client level alert
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "The level value will tell HM whether this is an interface level alert or a client alert."
|
||
::= {ahNotificationVarBind 64}
|
||
|
||
ahAlarmAlertType OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
crcrate (0), -- The CRC error rate only applies to interface level alert
|
||
txdroprate (1), -- The TX drop rate is calculated based on the max retried TX frames over total unicast TX frames
|
||
txretryrate (2), -- The TX retry rate is calculated based on the total retries over total unicast TX frames
|
||
rxdroprate (3), -- The RX drop rate is calculated based on the dropped RX frames over total RX frames
|
||
airtime (4) -- The The airtime percentage is the sum of both TX and RX airtime percentages
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "There are five types, CRC Rate only applies to interface level alert,
|
||
TX drop/retry rate is is calculated based on retries over total unicast TX frames,
|
||
RX drop rate is calculated based on the dropped RX frames over total RX frames,
|
||
Airtime percentage is the sum of both TX and RX airtime percentages."
|
||
::= {ahNotificationVarBind 65}
|
||
|
||
ahThresholdValue OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config."
|
||
::= {ahNotificationVarBind 66}
|
||
|
||
ahShortTermValue OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate."
|
||
::= {ahNotificationVarBind 67}
|
||
|
||
ahSnapshotValue OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "the snapshot value of CRC error rate, TX drop/retry rate, RX drop rate."
|
||
::= {ahNotificationVarBind 68}
|
||
|
||
ahIfName OBJECT-TYPE
|
||
SYNTAX AhString
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION "Name - uniquely identifies an AP Interface."
|
||
::= {ahNotificationVarBind 69}
|
||
|
||
END
|