mibs/MIBS/bdcom/BDCOM-PROCESS-MIB

-- *****************************************************************
-- BDCOM-PROCESS-MIB.my: MIB for CPU and process statistics
--
-- October 2003
--
-- Copyright (c) 2003 by BDCOM, Inc.
-- All rights reserved.
-- *****************************************************************
--

BDCOM-PROCESS-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Counter32,
	Gauge32
		FROM SNMPv2-SMI
	TimeStamp,
	DisplayString
		FROM SNMPv2-TC
	MODULE-COMPLIANCE,
	OBJECT-GROUP
		FROM SNMPv2-CONF
	bdMgmt
		FROM BDCOM-SMI
	Unsigned32 FROM SNMPv2-SMI
	EntPhysicalIndexOrZero
		FROM BDCOM-TC;


bdcomProcessMIB MODULE-IDENTITY
	LAST-UPDATED "200311060000Z"
	ORGANIZATION "BDCOM, Inc."
	CONTACT-INFO
		" Tel:   +86-21-50800666  
		 Postal: No.123,Juli RD,Zhangjiang Hitech Park,
			 Shanghai Baud Data Communication Corporation Inc,
			 Shanghai City 201203,
		 	P.R.C "
	DESCRIPTION
		"The MIB module to describe active system processes."
	REVISION        "200310160000Z"
	DESCRIPTION
		"Initial version of this MIB."		
	::= { bdMgmt 109 }

-- This MIB displays memory and CPU utilization on cisco devices. CPU 
-- utilization will give a general idea of how busy the processor is. 
-- The numbers are a ratio of the current idle time over the longest 
-- idle time. Please note that this information should be used as an 
-- estimate only. 

bdcomProcessMIBObjects	OBJECT IDENTIFIER ::= { bdcomProcessMIB 1 }
bdpmCPU		OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 1 }
bdpmProcess		OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 2 }


--BDCOM CPU Total Table

bdpmCPUTotalTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF BdpmCPUTotalEntry
	MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
		"A table of overall CPU statistics. "
	::= { bdpmCPU 1 }

bdpmCPUTotalEntry OBJECT-TYPE
	SYNTAX		BdpmCPUTotalEntry
	MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
		"Overall information about the CPU load. Entries in this
		table come and go as CPUs are added and removed from the
		system."
	INDEX	{ bdpmCPUTotalIndex }
	::= { bdpmCPUTotalTable 1 }

BdpmCPUTotalEntry ::=
	SEQUENCE {
		bdpmCPUTotalIndex		Unsigned32,
		bdpmCPUTotalPhysicalIndex	EntPhysicalIndexOrZero,
		bdpmCPUTotal5sec		Gauge32,
		bdpmCPUTotal1min		Gauge32,
		bdpmCPUTotal5min		Gauge32
	}

bdpmCPUTotalIndex OBJECT-TYPE
	SYNTAX          Unsigned32 (1.. 4294967295)
	MAX-ACCESS      not-accessible
	STATUS          current
	DESCRIPTION
		"An index that uniquely represents a CPU (or group of CPUs)
		whose CPU load information is reported by a row in this table.
		This index is assigned arbitrarily by the engine
		and is not saved over reboots."
	::= { bdpmCPUTotalEntry 1 }

bdpmCPUTotalPhysicalIndex OBJECT-TYPE
	SYNTAX	        EntPhysicalIndexOrZero
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The entPhysicalIndex of the physical entity for which
		 the CPU statistics in this entry are maintained.
		 The physical entity can be a CPU chip, a group of CPUs,
		 a CPU card etc. The exact type of this entity is described by
		 its entPhysicalVendorType value. If the CPU statistics
		 in this entry correspond to more than one physical entity
		 (or to no physical entity), or if the entPhysicalTable is
		 not supported on the SNMP agent, the value of this object
		 must be zero."
	::= { bdpmCPUTotalEntry 2 }

bdpmCPUTotal5sec OBJECT-TYPE
        SYNTAX          Gauge32 (1..100)
	UNITS		"percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The overall CPU busy percentage in the last 5 second 
		period. This object obsoletes the busyPer object from 
		the OLD-CISCO-SYSTEM-MIB. This object is deprecated
		by bdpmCPUTotal5secRev which has the changed range of
		value (0..100)."
	::= { bdpmCPUTotalEntry 3 }

bdpmCPUTotal1min OBJECT-TYPE
        SYNTAX          Gauge32  (1..100)
	UNITS		"percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The overall CPU busy percentage in the last 1 minute
		period. This object obsoletes the avgBusy1 object from 
		the OLD-CISCO-SYSTEM-MIB. This object is deprecated
		by bdpmCPUTotal1minRev which has the changed range
		of value (0..100)."
	::= { bdpmCPUTotalEntry 4 }

bdpmCPUTotal5min OBJECT-TYPE
        SYNTAX          Gauge32 (1..100)
	UNITS		"percent"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The overall CPU busy percentage in the last 5 minute
		period. This object deprecates the avgBusy5 object from 
		the OLD-CISCO-SYSTEM-MIB. This object is deprecated
		by bdpmCPUTotal5minRev which has the changed range 
		of value (0..100)."
	::= { bdpmCPUTotalEntry 5 }


-- BDCOM Processes Common Table

bdpmProcessTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF BdpmProcessEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
		"A table of generic information on all active 
		processes on this device."
	::= { bdpmProcess 1 }

bdpmProcessEntry OBJECT-TYPE
	SYNTAX    	BdpmProcessEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
		"Generic information about an active process on this 
		device. Entries in this table come and go as processes are 
		created and destroyed by the device."
	INDEX	{ bdpmCPUTotalIndex, bdpmProcessPID }
	::= { bdpmProcessTable 1 }

BdpmProcessEntry ::=
	SEQUENCE {
		bdpmProcessPID
			Unsigned32,
		bdpmProcessName 
			DisplayString,
		bdpmProcessPriority
			INTEGER,
		bdpmProcessTimeCreated
			TimeStamp
	}

bdpmProcessPID OBJECT-TYPE
	SYNTAX    	Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"This object contains the process ID. bdpmProcessTimeCreated
		should be checked against the last time it was polled,
		and if it has changed the PID has been reused and the
		 entire entry should be polled again. The process IDs
		are discrete."
	::= { bdpmProcessEntry 1 }

bdpmProcessName OBJECT-TYPE
	SYNTAX    	DisplayString(SIZE(1..32))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The name associated with this process. If the name is
		longer than 32 characters, it will be truncated to the first
		31 characters, and a `*' will be appended as the last
		character to imply this is a truncated process name."
	::= { bdpmProcessEntry 2 }

bdpmProcessPriority OBJECT-TYPE
	SYNTAX		INTEGER {
				critical(0),
				veryhigh(55),
				high(60),
				normal(128),
				low(180),
				verylow(255)
			}
	MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
		"The priority level at which the process is 
		running. This object is deprecated by
		bdpmProcExtPriorityRev."
	::= { bdpmProcessEntry 3 }

bdpmProcessTimeCreated OBJECT-TYPE
	SYNTAX		TimeStamp
	MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
		"The time when the process was created. The process ID 
		and the time when the process was created, uniquely 
		identifies a process."
	::= { bdpmProcessEntry 4 }

-- notifications

bdcomProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { bdcomProcessMIB 2 }
bdcomProcessMIBNotifs OBJECT IDENTIFIER ::=
	{ bdcomProcessMIBNotifPrefix 0 }

-- (no notifications are currently defined)


-- conformance information
--
--bdcomProcessMIBConformance OBJECT IDENTIFIER ::= { bdcomProcessMIB 3 }
--bdpmCompliances OBJECT IDENTIFIER ::= { bdcomProcessMIBConformance 1 }
--bdpmGroups OBJECT IDENTIFIER ::=      { bdcomProcessMIBConformance 2 }
--
--bdProcessMIBCompliance  MODULE-COMPLIANCE
--	STATUS	deprecated
--	DESCRIPTION
--		"The compliance statement for entities which implement
--		the BDCOM Process MIB. This is deprecated and new 
--		compliance bdProcessMIBComplianceRev is added."
-- this module
--	MODULE	
--		MANDATORY-GROUPS { bdpmCPUTotalGroup, bdpmProcessGroup }
--
--
--	GROUP bdpmProcessExtGroup
--	DESCRIPTION
--		"The bdpmProcessExtGroup is optional for all entities."
--
--	OBJECT		bdpmProcExtPriority
--	MIN-ACCESS	read-only
--	DESCRIPTION     "Write access is not required."
--
--	::= { bdpmCompliances 1 }
--
--bdProcessMIBComplianceRev  MODULE-COMPLIANCE
--	STATUS	current
--	DESCRIPTION
--		"The compliance statement for entities which implement
--		the BDCOM Process MIB. This compliance module
--		deprecates bdProcessMIBCompliance."
-- this module
--	MODULE	
--		MANDATORY-GROUPS { bdpmCPUTotalGroupRev, bdpmProcessGroupRev}	
--
--	GROUP bdpmProcessExtGroupRev
--	DESCRIPTION
--		"The bdpmProcessExtGroupRev is optional for all
--		entities. This object is defined after deprecating
--		bdpmProcessExtGroup."
--	
--	::= { bdpmCompliances 2 }
--
-- units of conformance
--
--bdpmCPUTotalGroup OBJECT-GROUP
--	OBJECTS {
--		bdpmCPUTotalPhysicalIndex,
--		bdpmCPUTotal5sec,
--		bdpmCPUTotal1min,
--		bdpmCPUTotal5min
--	}
--	STATUS  deprecated
--	DESCRIPTION
--		"A collection of objects providing CPU load monitoring
--		information. This group is mandatory for all cisco devices.
--		This group is deprecated since the objects bdpmCPUTotal5sec,
--		bdpmCPUTotal1min and bdpmCPUTotal5min are
--		deprecated. A new object bdpmCPUTotalGroupRev is
--		added in place of it."
--	::= { bdpmGroups 1 }
--
--bdpmProcessGroup OBJECT-GROUP
--	OBJECTS {
--		bdpmProcessPID,
--		bdpmProcessName,
--		bdpmProcessuSecs,
--		bdpmProcessTimeCreated
--	}
--	STATUS	deprecated
--	DESCRIPTION
--		"A collection of objects providing common process 
--		monitoring information. This group is mandatory for 
--		all cisco devices. This object is deprecated
--		by bdpmProcessGroupRev."
--	::= { bdpmGroups 2 }
--
--bdpmProcessExtGroup OBJECT-GROUP
--	OBJECTS {
--		bdpmProcExtMemAllocated,
--		bdpmProcExtMemFreed,
--		bdpmProcExtInvoked,
--		bdpmProcExtRuntime,
--		bdpmProcExtUtil5Sec,
--		bdpmProcExtUtil1Min,
--		bdpmProcExtUtil5Min,
--		bdpmProcExtPriority
--	}
--	STATUS	deprecated
--	DESCRIPTION
--		"A collection of objects providing additional and 
--		more detailed process monitoring information. This 
--		group is mandatory for all cisco devices that have 
--		the internal capability to keep this information. 
--		This group is deprecated and new group
--		bdpmProcessExtGroupRev is added."
--	::= { bdpmGroups 3 }
--
--bdpmCPUTotalGroupRev OBJECT-GROUP
--	OBJECTS {
--		bdpmCPUTotalPhysicalIndex,
--		bdpmCPUTotal5secRev,
--		bdpmCPUTotal1minRev,
--		bdpmCPUTotal5minRev
--	}
--	STATUS  current
--	DESCRIPTION
--		"A collection of objects providing CPU load monitoring
--		information. This group is mandatory for all cisco
--		devices. This group deprecates bdpmCPUTotalGroup."
--	::= { bdpmGroups 4 }
--
--bdpmProcessExtGroupRev OBJECT-GROUP
--	OBJECTS {
--		bdpmProcExtMemAllocatedRev,
--		bdpmProcExtMemFreedRev,
--		bdpmProcExtInvokedRev,
--		bdpmProcExtRuntimeRev,
--		bdpmProcExtUtil5SecRev,
--		bdpmProcExtUtil1MinRev,
--		bdpmProcExtUtil5MinRev,
--		bdpmProcExtPriorityRev
--	}
--	STATUS	current
--	DESCRIPTION
--		"A collection of objects providing additional and 
--		more detailed process monitoring information. This 
--		group is mandatory for all cisco devices that have 
--		the internal capability to keep this information.
--		This group is formed after deprecating bdpmProcessExtGroup.
--		bdpmProcExtMemAllocatedRev, bdpmProcExtMemFreedRev,
--		bdpmProcExtInvokedRev, bdpmProcExtRuntimeRev,
--		bdpmProcExtUtil5SecRev, bdpmProcExtUtil1MinRev and 
--		bdpmProcExtUtil5MinRev are the new objects added."
--	::= { bdpmGroups 5 }
--
--bdpmProcessGroupRev OBJECT-GROUP
--	OBJECTS {
--		bdpmProcessPID,
--		bdpmProcessName,
--		bdpmProcessAverageUSecs,
--		bdpmProcessTimeCreated
--	}
--	STATUS	current
--	DESCRIPTION
--		"A collection of objects providing common process 
--		monitoring information. This group is mandatory for 
--		all cisco devices. This object deprecates
--		bdpmProcessGroup."
--	::= { bdpmGroups 6 }

END