mibs/MIBS/bdcom/BDCOM-PROCESS-MIB
2023-12-05 12:25:34 +01:00

405 lines
12 KiB
Plaintext

-- *****************************************************************
-- BDCOM-PROCESS-MIB.my: MIB for CPU and process statistics
--
-- October 2003
--
-- Copyright (c) 2003 by BDCOM, Inc.
-- All rights reserved.
-- *****************************************************************
--
BDCOM-PROCESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32
FROM SNMPv2-SMI
TimeStamp,
DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
bdMgmt
FROM BDCOM-SMI
Unsigned32 FROM SNMPv2-SMI
EntPhysicalIndexOrZero
FROM BDCOM-TC;
bdcomProcessMIB MODULE-IDENTITY
LAST-UPDATED "200311060000Z"
ORGANIZATION "BDCOM, Inc."
CONTACT-INFO
" Tel: +86-21-50800666
Postal: No.123,Juli RD,Zhangjiang Hitech Park,
Shanghai Baud Data Communication Corporation Inc,
Shanghai City 201203,
P.R.C "
DESCRIPTION
"The MIB module to describe active system processes."
REVISION "200310160000Z"
DESCRIPTION
"Initial version of this MIB."
::= { bdMgmt 109 }
-- This MIB displays memory and CPU utilization on cisco devices. CPU
-- utilization will give a general idea of how busy the processor is.
-- The numbers are a ratio of the current idle time over the longest
-- idle time. Please note that this information should be used as an
-- estimate only.
bdcomProcessMIBObjects OBJECT IDENTIFIER ::= { bdcomProcessMIB 1 }
bdpmCPU OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 1 }
bdpmProcess OBJECT IDENTIFIER ::= { bdcomProcessMIBObjects 2 }
--BDCOM CPU Total Table
bdpmCPUTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF BdpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of overall CPU statistics. "
::= { bdpmCPU 1 }
bdpmCPUTotalEntry OBJECT-TYPE
SYNTAX BdpmCPUTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Overall information about the CPU load. Entries in this
table come and go as CPUs are added and removed from the
system."
INDEX { bdpmCPUTotalIndex }
::= { bdpmCPUTotalTable 1 }
BdpmCPUTotalEntry ::=
SEQUENCE {
bdpmCPUTotalIndex Unsigned32,
bdpmCPUTotalPhysicalIndex EntPhysicalIndexOrZero,
bdpmCPUTotal5sec Gauge32,
bdpmCPUTotal1min Gauge32,
bdpmCPUTotal5min Gauge32
}
bdpmCPUTotalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely represents a CPU (or group of CPUs)
whose CPU load information is reported by a row in this table.
This index is assigned arbitrarily by the engine
and is not saved over reboots."
::= { bdpmCPUTotalEntry 1 }
bdpmCPUTotalPhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex of the physical entity for which
the CPU statistics in this entry are maintained.
The physical entity can be a CPU chip, a group of CPUs,
a CPU card etc. The exact type of this entity is described by
its entPhysicalVendorType value. If the CPU statistics
in this entry correspond to more than one physical entity
(or to no physical entity), or if the entPhysicalTable is
not supported on the SNMP agent, the value of this object
must be zero."
::= { bdpmCPUTotalEntry 2 }
bdpmCPUTotal5sec OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 5 second
period. This object obsoletes the busyPer object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by bdpmCPUTotal5secRev which has the changed range of
value (0..100)."
::= { bdpmCPUTotalEntry 3 }
bdpmCPUTotal1min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 1 minute
period. This object obsoletes the avgBusy1 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by bdpmCPUTotal1minRev which has the changed range
of value (0..100)."
::= { bdpmCPUTotalEntry 4 }
bdpmCPUTotal5min OBJECT-TYPE
SYNTAX Gauge32 (1..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The overall CPU busy percentage in the last 5 minute
period. This object deprecates the avgBusy5 object from
the OLD-CISCO-SYSTEM-MIB. This object is deprecated
by bdpmCPUTotal5minRev which has the changed range
of value (0..100)."
::= { bdpmCPUTotalEntry 5 }
-- BDCOM Processes Common Table
bdpmProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF BdpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of generic information on all active
processes on this device."
::= { bdpmProcess 1 }
bdpmProcessEntry OBJECT-TYPE
SYNTAX BdpmProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Generic information about an active process on this
device. Entries in this table come and go as processes are
created and destroyed by the device."
INDEX { bdpmCPUTotalIndex, bdpmProcessPID }
::= { bdpmProcessTable 1 }
BdpmProcessEntry ::=
SEQUENCE {
bdpmProcessPID
Unsigned32,
bdpmProcessName
DisplayString,
bdpmProcessPriority
INTEGER,
bdpmProcessTimeCreated
TimeStamp
}
bdpmProcessPID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the process ID. bdpmProcessTimeCreated
should be checked against the last time it was polled,
and if it has changed the PID has been reused and the
entire entry should be polled again. The process IDs
are discrete."
::= { bdpmProcessEntry 1 }
bdpmProcessName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name associated with this process. If the name is
longer than 32 characters, it will be truncated to the first
31 characters, and a `*' will be appended as the last
character to imply this is a truncated process name."
::= { bdpmProcessEntry 2 }
bdpmProcessPriority OBJECT-TYPE
SYNTAX INTEGER {
critical(0),
veryhigh(55),
high(60),
normal(128),
low(180),
verylow(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority level at which the process is
running. This object is deprecated by
bdpmProcExtPriorityRev."
::= { bdpmProcessEntry 3 }
bdpmProcessTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the process was created. The process ID
and the time when the process was created, uniquely
identifies a process."
::= { bdpmProcessEntry 4 }
-- notifications
bdcomProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { bdcomProcessMIB 2 }
bdcomProcessMIBNotifs OBJECT IDENTIFIER ::=
{ bdcomProcessMIBNotifPrefix 0 }
-- (no notifications are currently defined)
-- conformance information
--
--bdcomProcessMIBConformance OBJECT IDENTIFIER ::= { bdcomProcessMIB 3 }
--bdpmCompliances OBJECT IDENTIFIER ::= { bdcomProcessMIBConformance 1 }
--bdpmGroups OBJECT IDENTIFIER ::= { bdcomProcessMIBConformance 2 }
--
--bdProcessMIBCompliance MODULE-COMPLIANCE
-- STATUS deprecated
-- DESCRIPTION
-- "The compliance statement for entities which implement
-- the BDCOM Process MIB. This is deprecated and new
-- compliance bdProcessMIBComplianceRev is added."
-- this module
-- MODULE
-- MANDATORY-GROUPS { bdpmCPUTotalGroup, bdpmProcessGroup }
--
--
-- GROUP bdpmProcessExtGroup
-- DESCRIPTION
-- "The bdpmProcessExtGroup is optional for all entities."
--
-- OBJECT bdpmProcExtPriority
-- MIN-ACCESS read-only
-- DESCRIPTION "Write access is not required."
--
-- ::= { bdpmCompliances 1 }
--
--bdProcessMIBComplianceRev MODULE-COMPLIANCE
-- STATUS current
-- DESCRIPTION
-- "The compliance statement for entities which implement
-- the BDCOM Process MIB. This compliance module
-- deprecates bdProcessMIBCompliance."
-- this module
-- MODULE
-- MANDATORY-GROUPS { bdpmCPUTotalGroupRev, bdpmProcessGroupRev}
--
-- GROUP bdpmProcessExtGroupRev
-- DESCRIPTION
-- "The bdpmProcessExtGroupRev is optional for all
-- entities. This object is defined after deprecating
-- bdpmProcessExtGroup."
--
-- ::= { bdpmCompliances 2 }
--
-- units of conformance
--
--bdpmCPUTotalGroup OBJECT-GROUP
-- OBJECTS {
-- bdpmCPUTotalPhysicalIndex,
-- bdpmCPUTotal5sec,
-- bdpmCPUTotal1min,
-- bdpmCPUTotal5min
-- }
-- STATUS deprecated
-- DESCRIPTION
-- "A collection of objects providing CPU load monitoring
-- information. This group is mandatory for all cisco devices.
-- This group is deprecated since the objects bdpmCPUTotal5sec,
-- bdpmCPUTotal1min and bdpmCPUTotal5min are
-- deprecated. A new object bdpmCPUTotalGroupRev is
-- added in place of it."
-- ::= { bdpmGroups 1 }
--
--bdpmProcessGroup OBJECT-GROUP
-- OBJECTS {
-- bdpmProcessPID,
-- bdpmProcessName,
-- bdpmProcessuSecs,
-- bdpmProcessTimeCreated
-- }
-- STATUS deprecated
-- DESCRIPTION
-- "A collection of objects providing common process
-- monitoring information. This group is mandatory for
-- all cisco devices. This object is deprecated
-- by bdpmProcessGroupRev."
-- ::= { bdpmGroups 2 }
--
--bdpmProcessExtGroup OBJECT-GROUP
-- OBJECTS {
-- bdpmProcExtMemAllocated,
-- bdpmProcExtMemFreed,
-- bdpmProcExtInvoked,
-- bdpmProcExtRuntime,
-- bdpmProcExtUtil5Sec,
-- bdpmProcExtUtil1Min,
-- bdpmProcExtUtil5Min,
-- bdpmProcExtPriority
-- }
-- STATUS deprecated
-- DESCRIPTION
-- "A collection of objects providing additional and
-- more detailed process monitoring information. This
-- group is mandatory for all cisco devices that have
-- the internal capability to keep this information.
-- This group is deprecated and new group
-- bdpmProcessExtGroupRev is added."
-- ::= { bdpmGroups 3 }
--
--bdpmCPUTotalGroupRev OBJECT-GROUP
-- OBJECTS {
-- bdpmCPUTotalPhysicalIndex,
-- bdpmCPUTotal5secRev,
-- bdpmCPUTotal1minRev,
-- bdpmCPUTotal5minRev
-- }
-- STATUS current
-- DESCRIPTION
-- "A collection of objects providing CPU load monitoring
-- information. This group is mandatory for all cisco
-- devices. This group deprecates bdpmCPUTotalGroup."
-- ::= { bdpmGroups 4 }
--
--bdpmProcessExtGroupRev OBJECT-GROUP
-- OBJECTS {
-- bdpmProcExtMemAllocatedRev,
-- bdpmProcExtMemFreedRev,
-- bdpmProcExtInvokedRev,
-- bdpmProcExtRuntimeRev,
-- bdpmProcExtUtil5SecRev,
-- bdpmProcExtUtil1MinRev,
-- bdpmProcExtUtil5MinRev,
-- bdpmProcExtPriorityRev
-- }
-- STATUS current
-- DESCRIPTION
-- "A collection of objects providing additional and
-- more detailed process monitoring information. This
-- group is mandatory for all cisco devices that have
-- the internal capability to keep this information.
-- This group is formed after deprecating bdpmProcessExtGroup.
-- bdpmProcExtMemAllocatedRev, bdpmProcExtMemFreedRev,
-- bdpmProcExtInvokedRev, bdpmProcExtRuntimeRev,
-- bdpmProcExtUtil5SecRev, bdpmProcExtUtil1MinRev and
-- bdpmProcExtUtil5MinRev are the new objects added."
-- ::= { bdpmGroups 5 }
--
--bdpmProcessGroupRev OBJECT-GROUP
-- OBJECTS {
-- bdpmProcessPID,
-- bdpmProcessName,
-- bdpmProcessAverageUSecs,
-- bdpmProcessTimeCreated
-- }
-- STATUS current
-- DESCRIPTION
-- "A collection of objects providing common process
-- monitoring information. This group is mandatory for
-- all cisco devices. This object deprecates
-- bdpmProcessGroup."
-- ::= { bdpmGroups 6 }
END