david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cambium/800/CAMBIUM-PTP800-V1-MIB

4246 lines
153 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CAMBIUM-PTP800-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress, enterprises
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
TRAP-TYPE
FROM RFC-1215
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB;
-- Define the Cambium PTP object identifier
cambium OBJECT IDENTIFIER ::= { enterprises 17713 }
-- Groups in cambium
ptp OBJECT IDENTIFIER ::= { cambium 1 }
ptmp OBJECT IDENTIFIER ::= { cambium 2 }
ptp800 OBJECT IDENTIFIER ::= { cambium 8 }
-- Groups in ptp800
bridge OBJECT IDENTIFIER ::= { ptp800 4 }
configuration OBJECT IDENTIFIER ::= { ptp800 5 }
ethernet OBJECT IDENTIFIER ::= { ptp800 6 }
licence OBJECT IDENTIFIER ::= { ptp800 8 }
management OBJECT IDENTIFIER ::= { ptp800 9 }
phyControl OBJECT IDENTIFIER ::= { ptp800 10 }
phyStatus OBJECT IDENTIFIER ::= { ptp800 12 }
alarms OBJECT IDENTIFIER ::= { ptp800 13 }
smtp OBJECT IDENTIFIER ::= { ptp800 15 }
snmpControl OBJECT IDENTIFIER ::= { ptp800 16 }
sntp OBJECT IDENTIFIER ::= { ptp800 17 }
reset OBJECT IDENTIFIER ::= { ptp800 18 }
versions OBJECT IDENTIFIER ::= { ptp800 19 }
pubStats OBJECT IDENTIFIER ::= { ptp800 20 }
encryption OBJECT IDENTIFIER ::= { ptp800 22 }
rfu OBJECT IDENTIFIER ::= { ptp800 23 }
radioLicense OBJECT IDENTIFIER ::= { ptp800 24 }
protectionConfig OBJECT IDENTIFIER ::= { ptp800 25 }
protectionStatus OBJECT IDENTIFIER ::= { ptp800 26 }
protectionStats OBJECT IDENTIFIER ::= { ptp800 27 }
aAAControl OBJECT IDENTIFIER ::= { ptp800 29 }
syslogControl OBJECT IDENTIFIER ::= { ptp800 28 }
supplementary OBJECT IDENTIFIER ::= { ptp800 96 }
ptpTraps OBJECT IDENTIFIER ::= { ptp800 99 }
ptpTrapPrefix OBJECT IDENTIFIER ::= { ptpTraps 0 }
EthernetPriorityTableEntry ::=
SEQUENCE { ethernetPriorityQueueMapping INTEGER
, ethernetPriorityTableIndex INTEGER
}
ethernetPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthernetPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority."
::= { ethernet 15 }
ethernetPriorityTableEntry OBJECT-TYPE
SYNTAX EthernetPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table EthernetPriorityTable"
INDEX { ethernetPriorityTableIndex }
::= { ethernetPriorityTable 1 }
L2CPPriorityTableEntry ::=
SEQUENCE { l2CPPriorityQueueMapping INTEGER
, l2CPPriorityTableIndex INTEGER
}
l2CPPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2CPPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A priority queue mapping table. This is a list of packet queues associated with the different layer 2 control protocol frameworks."
::= { ethernet 32 }
l2CPPriorityTableEntry OBJECT-TYPE
SYNTAX L2CPPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table L2CPPriorityTable"
INDEX { l2CPPriorityTableIndex }
::= { l2CPPriorityTable 1 }
IPDSCPPriorityTableEntry ::=
SEQUENCE { iPDSCPPriorityQueueMapping INTEGER
, iPDSCPPriorityTableIndex INTEGER
}
iPDSCPPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPDSCPPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority."
::= { ethernet 38 }
iPDSCPPriorityTableEntry OBJECT-TYPE
SYNTAX IPDSCPPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table IPDSCPPriorityTable"
INDEX { iPDSCPPriorityTableIndex }
::= { iPDSCPPriorityTable 1 }
MPLSTCPriorityTableEntry ::=
SEQUENCE { mPLSTCPriorityQueueMapping INTEGER
, mPLSTCPriorityTableIndex INTEGER
}
mPLSTCPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF MPLSTCPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority."
::= { ethernet 40 }
mPLSTCPriorityTableEntry OBJECT-TYPE
SYNTAX MPLSTCPriorityTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table MPLSTCPriorityTable"
INDEX { mPLSTCPriorityTableIndex }
::= { mPLSTCPriorityTable 1 }
SNMPTrapTableEntry ::=
SEQUENCE { sNMPTrapTableIndex INTEGER
, sNMPTrapIPAddress IpAddress
, sNMPTrapPortNumber INTEGER
, sNMPTrapInternetAddressType INTEGER
, sNMPTrapInternetAddress InetAddress
, sNMPTrapReceiverEnabled INTEGER
}
sNMPTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SNMPTrapTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" SNMP trap configuration table."
::= { snmpControl 10 }
sNMPTrapTableEntry OBJECT-TYPE
SYNTAX SNMPTrapTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table SNMPTrapTable"
INDEX { sNMPTrapTableIndex }
::= { sNMPTrapTable 1 }
SNTPServerTableEntry ::=
SEQUENCE { sNTPServerTableIndex INTEGER
, sNTPServerIPAddress IpAddress
, sNTPServerPortNumber INTEGER
, sNTPServerResponse DisplayString
, sNTPServerInternetAddressType INTEGER
, sNTPServerInternetAddress InetAddress
}
sNTPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SNTPServerTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { sntp 15 }
sNTPServerTableEntry OBJECT-TYPE
SYNTAX SNTPServerTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table SNTPServerTable"
INDEX { sNTPServerTableIndex }
::= { sNTPServerTable 1 }
UserTableEntry ::=
SEQUENCE { userTableIndex INTEGER
, userName OCTET STRING
, userRole INTEGER
, userEnabled INTEGER
, userPassword OCTET STRING
}
userTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The User Table Control group contains objects specifically for user account management."
::= { aAAControl 2 }
userTableEntry OBJECT-TYPE
SYNTAX UserTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table UserTable"
INDEX { userTableIndex }
::= { userTable 1 }
-- Bridge group attribute definitions
--
localPacketFiltering OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the filtering of Ethernet frames that have been
sourced from the CMU management agent. When Local Packet
Filtering is disabled, such frames are transmitted at the
Wireless Interface and either the Management Port for
Out-of-Band operation or the Data Port for In-Band
operation. This is regardless of whether the port has
been learned for the destination address. When Local
Packet Filtering is enabled, such frames are only
transmitted at the port which has been learned for the
destination address"
::= { bridge 1 }
-- Configuration group attribute definitions
--
iPv4Address OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network."
::= { configuration 1 }
subnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve network security and performance"
::= { configuration 2 }
gatewayIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv4 address of a device on the current network that
acts as an IPv4 network gateway. A gateway acts as an
entrance / exit to packets from / to other networks."
::= { configuration 3 }
maximumTransmitPower OBJECT-TYPE
SYNTAX INTEGER (-1000..370)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless link,
expressed in tenths of a dBm. Note that when an IRFU is
connected rather than an ODU, the transmit power refers
to the power at the transceiver output and not the IRFU
antenna port. See the User Guide for more details"
::= { configuration 6 }
antennaGain OBJECT-TYPE
SYNTAX INTEGER (0..610)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Antenna Gain. Expressed in 10ths of dBi."
::= { configuration 7 }
rFFeederLoss OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Insertion loss of the microwave connection between the
RFU and the antenna. The feeder loss should be 0 dB for
the standard 1 + 0 direct mount configuration. Expressed
in 10ths of dB."
::= { configuration 8 }
remoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP Address of the peer wireless unit"
::= { configuration 12 }
remoteMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Address of the peer wireless unit"
::= { configuration 13 }
enableTransmission OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
muted(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Permits the transmitter to radiate. Once the unit is
installed and configured, use this to enable the
transmitter"
::= { configuration 14 }
aTPCEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enables Automatic Transmitter Power Control (ATPC).
NOTE: Use of ATPC is mandatory in some regions. When ATPC
is enabled, the transmit power is dynamically adjusted to
optimize link performance. The transmit power will always
be adjusted within the constraints set by Maximum
Transmit Power. When ATPC is disabled, the transmit power
will be fixed at the level set by Maximum Transmit Power.
When adaptive modulation is enabled, this setting can
limit the capacity of the system by capping the
modulation to a mode which is consistent with the
configured Maximum Transmit Power."
::= { configuration 15 }
iFCableLength OBJECT-TYPE
SYNTAX INTEGER (0..19000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IF Cable Length in cm - please refer to the user manual
for more information on the recommended cable type."
::= { configuration 16 }
linkName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the PTP link allocated by the System
Administrator. Used to establish a connection with the
correct PTP wireless unit at the other end of the link.
NOTE: The link name MUST be the same at both ends of the
PTP link."
::= { configuration 17 }
siteName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field is allocated by the system administrator and
contains a description of the site name together with any
additional notes"
::= { configuration 18 }
diverseAntennaGain OBJECT-TYPE
SYNTAX INTEGER (0..610)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Diverse Antenna Receive Gain. Expressed in 10ths of
dBi."
::= { configuration 19 }
diverseRfFeederLoss OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Insertion loss of the microwave connection between the
RFU and the diverse antenna. Expressed in 10ths of dB."
::= { configuration 20 }
iPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network."
::= { configuration 21 }
iPVersion OBJECT-TYPE
SYNTAX INTEGER {
ipv4(0),
ipv6(1),
dual-ipv4-and-ipv6(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP protocol selection. Choice of IPv4, IPv6 or Dual."
::= { configuration 22 }
iPv6AutoConfiguredLinkLocalAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The auto configured link local IPv6 address"
::= { configuration 23 }
iPv6PrefixLength OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv6 prefix length"
::= { configuration 24 }
iPv6GatewayAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..39))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IPv6 address of a device on the current network that
is currently acting as an IPv6 network gateway. A gateway
acts as an entrance / exit to packets from / to other
networks."
::= { configuration 25 }
remoteInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
remoteInternetAddressType."
::= { configuration 26 }
remoteInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"INET address used to identify the peer wireless unit"
::= { configuration 27 }
-- Ethernet group attribute definitions
--
dataPortCopperAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls whether the configuration of the copper
data Ethernet interface is automatically negotiated or
forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To
operate an Ethernet link at a fixed speed, leave auto
negotiation enabled and limit the Auto Neg Advertisement
to the desired speed. Only force Ethernet configuration
as a last resort if constrained auto negotiation fails.
NB: Auto-MDI/MDIX is disabled when Forced is set, and the
unit defaults to MDIX, so the correct straight through or
crossover cable will be required to establish a
connection. NB: both ends of an Ethernet link must be
configured identically, as Forced and auto negotiation
are NOT compatible. A mixed configuration will cause a
duplex mismatch"
::= { ethernet 1 }
dataPortCopperAutoNegAdvertisement OBJECT-TYPE
SYNTAX BITS {
neg-100-mbps-full-duplex(6),
neg-1000-mbps-full-duplex(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This sets the different configurations of the copper
data Ethernet interface that will be advertised during
auto negotiation. WARNING: Duplex mismatch may result if
both ends of the Ethernet link do not have the same
settings. Do not use auto negotiation together with a
fixed setting at the Ethernet link partner (other end of
the link). WARNING: Make sure that you select option(s)
that you know your connected equipment can cater for!"
::= { ethernet 2 }
dataPortStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
copper-link-up(1),
fiber-link-up(2),
fiber-y-inactive(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current status of the data Ethernet link. NB: a change
of state may generate an SNMP trap and/or SMTP email
alert"
::= { ethernet 4 }
dataPortSpeedAndDuplex OBJECT-TYPE
SYNTAX INTEGER {
speed1000mbpsfullduplex(0),
speed100mbpsfullduplex(1),
unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current speed and duplex of the data Ethernet link"
::= { ethernet 5 }
dataPortWirelessDownAlert OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, this causes the data Ethernet link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a problem"
::= { ethernet 6 }
useVLANForManagementInterfaces OBJECT-TYPE
SYNTAX INTEGER {
no-vlan-tagging(0),
ieee-8021q-tagged-c-tag-type-8100(1),
ieee-8021ad-tagged-s-tag-or-b-tag-type-88a8(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls whether the management interfaces
(WWW/SNMP/SMTP/SNTP) use VLAN tags or not"
::= { ethernet 7 }
vLANManagementPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This VLAN Priority (0-7) will be included in packets
generated by the management interfaces"
::= { ethernet 8 }
vLANManagementVIDValidation OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured VLAN
Management VID, otherwise packets with any VID will be
accepted"
::= { ethernet 9 }
vLANManagementVID OBJECT-TYPE
SYNTAX INTEGER (0..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This VLAN VID (0-4094) will be included in packets
generated by the management interfaces"
::= { ethernet 11 }
ethernetPriorityTableNumber OBJECT-TYPE
SYNTAX INTEGER (9)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the ethernetPriorityTable."
::= { ethernet 14 }
managementPortAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls whether the configuration of the
out-of-band management Ethernet interface is
automatically negotiated or forced. WARNING: ONLY USE
FORCED AS A LAST RESORT. To operate an Ethernet link at a
fixed speed, leave auto negotiation enabled and limit the
Auto Neg Advertisement to the desired speed. Only force
Ethernet configuration as a last resort if constrained
auto negotiation fails. NB: Auto-MDI/MDIX is disabled
when Forced is set, and the unit defaults to MDIX, so the
correct straight through or crossover cable will be
required to establish a connection. NB: both ends of an
Ethernet link must be configured identically, as Forced
and auto negotiation are NOT compatible. A mixed
configuration will cause a duplex mismatch"
::= { ethernet 16 }
managementPortAutoNegAdvertisement OBJECT-TYPE
SYNTAX BITS {
neg-10-mbps-full-duplex(6),
neg-100-mbps-full-duplex(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This sets the different configurations of the
out-of-band management Ethernet interface that will be
advertised during auto negotiation. WARNING: Duplex
mismatch may result if both ends of the Ethernet link do
not have the same settings. Do not use auto negotiation
together with a fixed setting at the Ethernet link
partner (other end of the link). WARNING: Make sure that
you select option(s) that you know your connected
equipment can cater for!"
::= { ethernet 17 }
managementPortStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
copper-link-up(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current status of the out-of-band management Ethernet
link"
::= { ethernet 18 }
managementPortSpeedAndDuplex OBJECT-TYPE
SYNTAX INTEGER {
speed100mbpsfullduplex(1),
speed10mbpsfullduplex(2),
unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current speed and duplex of the out-of-band
management Ethernet link"
::= { ethernet 19 }
managementPortWirelessDownAlert OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, this causes the out-of-band management
Ethernet link to be dropped briefly when the wireless
link drops. This is so that spanning tree algorithms can
quickly detect that there is a problem"
::= { ethernet 20 }
managementMode OBJECT-TYPE
SYNTAX INTEGER {
out-of-band-local(0),
out-of-band(1),
in-band(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management mode: Out-of-band management. End-to-end
out-of-band mode in which the management agent can be
reached from the management port at the local CMU, and
(assuming that the wireless link is established) the
management port at the remote CMU. Out-of-band local
management. (default) Similar to the standard out-of-band
mode, except that management frames are not forwarded
over the wireless link. In-band management. The
management agent can be reached from the data port at the
local CMU, and (assuming that the wireless link is
established) the data port at the remote CMU. In this
mode, the management port is disabled."
::= { ethernet 22 }
managementCommittedInformationRate OBJECT-TYPE
SYNTAX INTEGER {
kbps-200(0),
kbps-300(1),
kbps-400(2),
kbps-500(3),
kbps-600(4),
kbps-700(5),
kbps-800(6),
kbps-900(7),
kbps-1000(8),
kbps-1100(9),
kbps-1200(10),
kbps-1300(11),
kbps-1400(12),
kbps-1500(13),
kbps-1600(14),
kbps-1700(15),
kbps-1800(16),
kbps-1900(17),
kbps-2000(18)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Management Network Committed Information Rate (CIR).
The Management Network guarantees this capacity will be
available for management traffic"
::= { ethernet 23 }
dataPortPauseFrames OBJECT-TYPE
SYNTAX INTEGER {
tunnel(0),
discard(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Controls whether the bridge tunnels or discards Layer 2
PAUSE frames arriving at the data Ethernet port. Such
frames are identified by the destination MAC Address
being equal to 01-80-C2-00-00-01"
::= { ethernet 24 }
transmitCapacityLimit OBJECT-TYPE
SYNTAX INTEGER (0..10000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transmit capacity is limited by the lower of: 1) the
capacity limit specified by the installed License Key. 2)
the Ethernet speed negotiated at the other end of the
wireless link. Value expressed in 10ths of Mbps. 0
indicates unlimited"
::= { ethernet 26 }
transmitCapacityLimitDetail OBJECT-TYPE
SYNTAX INTEGER {
limited-due-to-absence-of-license-key(0),
running-at-the-capacity-limit(1),
running-at-unlimited-capacity(2),
restricted-due-to-remote-ethernet-speed(3),
limited-due-to-development-override(4),
unlimited-due-to-development-override(5),
unlimited-capacity-trial-period(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A brief description of the reason (if any) for the limit
being applied to the transmit capacity"
::= { ethernet 27 }
dataPortEthernetMediaTypeToUse OBJECT-TYPE
SYNTAX INTEGER {
auto-with-fiber-preference(0),
force-copper(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical media type to use on the data Ethernet port
"
::= { ethernet 28 }
dataPortCopperForcedConfiguration OBJECT-TYPE
SYNTAX INTEGER {
force-100-mbps-full-duplex(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This forces the configuration of the copper data
Ethernet interface rather than using auto negotiation.
THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING
PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT
YOU CONFIGURE BOTH THIS UNIT AND THE Ethernet PORT TO
WHICH IT IS CONNECTED IDENTICALLY! WARNING: Duplex
mismatch may result if both ends of the Ethernet link do
not have the same settings. Do not use auto negotiation
together with a fixed setting at the Ethernet link
partner (other end of the link)"
::= { ethernet 29 }
managementPortForcedConfiguration OBJECT-TYPE
SYNTAX INTEGER {
force-100-mbps-full-duplex(0),
force-10-mbps-full-duplex(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This forces the configuration of the out-of-band
management Ethernet interface rather than using auto
negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF
YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU
MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE
Ethernet PORT TO WHICH IT IS CONNECTED IDENTICALLY!
WARNING: Duplex mismatch may result if both ends of the
Ethernet link do not have the same settings. Do not use
auto negotiation together with a fixed setting at the
Ethernet link partner (other end of the link)"
::= { ethernet 30 }
l2CPPriorityTableNumber OBJECT-TYPE
SYNTAX INTEGER (5)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the l2CPPriorityTable."
::= { ethernet 31 }
unknownNetworkPriorityQueueMapping OBJECT-TYPE
SYNTAX INTEGER {
q0(0),
q1(1),
q2(2),
q3(3),
q4(4),
q5(5),
q6(6),
q7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the classification of unknown network
protocols to an egress queue at the wireless port.
Unknown means something other than IP and MPLS"
::= { ethernet 33 }
dSCPManagementPriority OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Differentiated Services Code Point value will be
inserted in the IP Header of all IP Datagrams transmitted
by the management interfaces"
::= { ethernet 34 }
qOSPriorityScheme OBJECT-TYPE
SYNTAX INTEGER {
ethernet(0),
ipmpls(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Selects classification based on fields in the Ethernet
header (Layer 2) or in the Network header (Layer 3). The
unit recognises two network layer protocols: IP and MPLS"
::= { ethernet 35 }
iPDSCPPriorityTableNumber OBJECT-TYPE
SYNTAX INTEGER (64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the iPDSCPPriorityTable."
::= { ethernet 37 }
mPLSTCPriorityTableNumber OBJECT-TYPE
SYNTAX INTEGER (8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the mPLSTCPriorityTable."
::= { ethernet 39 }
-- EthernetPriorityTable group attribute definitions
--
ethernetPriorityQueueMapping OBJECT-TYPE
SYNTAX INTEGER {
q0(0),
q1(1),
q2(2),
q3(3),
q4(4),
q5(5),
q6(6),
q7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the classification of this Ethernet priority
(also known as IEEE 802.1p value) to an egress queue at
the wireless port."
::= { ethernetPriorityTableEntry 1 }
ethernetPriorityTableIndex OBJECT-TYPE
SYNTAX INTEGER {
p0(1),
p1(2),
p2(3),
p3(4),
p4(5),
p5(6),
p6(7),
p7(8),
untagged(9)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet priority flag, used to index values in the
ethernetPriorityTable."
::= { ethernetPriorityTableEntry 2 }
-- L2CPPriorityTable group attribute definitions
--
l2CPPriorityQueueMapping OBJECT-TYPE
SYNTAX INTEGER {
q0(0),
q1(1),
q2(2),
q3(3),
q4(4),
q5(5),
q6(6),
q7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the classification of this layer two control
protocol (L2CP) to an egress queue at the wireless port"
::= { l2CPPriorityTableEntry 1 }
l2CPPriorityTableIndex OBJECT-TYPE
SYNTAX INTEGER {
bridge(1),
garpmrp(2),
cfm(3),
r-aps(4),
eaps(5)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"layer 2 control protocol, used to index values in the
l2CPPriorityTable."
::= { l2CPPriorityTableEntry 2 }
-- IPDSCPPriorityTable group attribute definitions
--
iPDSCPPriorityQueueMapping OBJECT-TYPE
SYNTAX INTEGER {
q0(0),
q1(1),
q2(2),
q3(3),
q4(4),
q5(5),
q6(6),
q7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the classification of this IP differentiated
services code point (DSCP) value to an egress queue at
the wireless port"
::= { iPDSCPPriorityTableEntry 1 }
iPDSCPPriorityTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP DSCP priority flag, used to index values in the
iPDSCPPriorityTable"
::= { iPDSCPPriorityTableEntry 2 }
-- MPLSTCPriorityTable group attribute definitions
--
mPLSTCPriorityQueueMapping OBJECT-TYPE
SYNTAX INTEGER {
q0(0),
q1(1),
q2(2),
q3(3),
q4(4),
q5(5),
q6(6),
q7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures the classification of this MPLS traffic class
(the field formerly known as EXP) to an egress queue at
the wireless port"
::= { mPLSTCPriorityTableEntry 1 }
mPLSTCPriorityTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MPLS TC priority flag, used to index values in the
mPLSTCPriorityTable"
::= { mPLSTCPriorityTableEntry 2 }
-- Licence group attribute definitions
--
productVariant OBJECT-TYPE
SYNTAX INTEGER {
ptp-xx400-full(0),
ptp-xx400-deprecated-1(1),
ptp-xx400-deprecated-2(2),
ptp-xx400-lite(3),
spare-1(4),
ptp-xx300(5),
spare-2(6),
spare-3(7),
ptp-xx500-full-deprecated(8),
ptp-xx500-lite-deprecated(9),
ptp-xx500(10),
ptp-xx600-lite(11),
ptp-xx600-full(12),
spare-5(13),
spare-6(14),
ptp-800(15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The product variant"
::= { licence 2 }
productName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the product variant"
::= { licence 3 }
ethernetFiberSupport OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet fiber support availability on this wireless
unit"
::= { licence 4 }
transmitCapacity OBJECT-TYPE
SYNTAX INTEGER {
rate-10-mbps(0),
rate-20-mbps(1),
rate-30-mbps(2),
rate-40-mbps(3),
rate-50-mbps(4),
rate-100-mbps(5),
rate-150-mbps(6),
rate-200-mbps(7),
rate-300-mbps(8),
rate-unlimited(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum capacity the wireless link may provide in the
transmit direction. This is restricted by the License
Key."
::= { licence 10 }
encryptionAlgorithmsAvail OBJECT-TYPE
SYNTAX INTEGER {
none(0),
aes-rijndael(1),
aes-256-bit-rijndael(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Encryption Algorithm(s) available to the wireless
link. N.B. The same Encryption Algorithm must be
configured at BOTH ends of the link for it to function
correctly"
::= { licence 11 }
securityLevel OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configurable security level"
::= { licence 12 }
-- Management group attribute definitions
--
linkNameMismatch OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
link-name-mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Signaling was received with the wrong Link Name. Either
the Link Name is configured differently at each end of
the wireless link, or this unit is aligned to the wrong
link partner. NB: A change of value during operation may
generate an SNMP trap and/or SMTP email alert"
::= { management 3 }
alignmentMode OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
aligning(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the unit is undergoing alignment. NB: a
change of state during operation may generate an SNMP
trap and/or SMTP email alert"
::= { management 4 }
tFTPServerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved"
::= { management 5 }
tFTPServerPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved"
::= { management 6 }
tFTPSoftwareUpgradeFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Filename of the Software Upgrade to be loaded from the
TFTP Server"
::= { management 7 }
tFTPStartSoftwareUpgrade OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Write '1' to this attribute to start the TFTP software
upgrade process. The attribute will be reset to 0 when
the upgrade process has finished"
::= { management 8 }
tFTPSoftwareUpgradeStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
upload-in-progress(1),
upload-successful-programming-flash(2),
upgrade-successful-reboot-to-run-the-new-software-image(3),
upgrade-failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current status of the TFTP Software upgrade process"
::= { management 9 }
tFTPSoftwareUpgradeStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Descriptive text describing the status of the TFTP
Software upgrade process, including any error details"
::= { management 10 }
tFTPSoftwareUpgradeStatusAdditionalText OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Any additional text describing the status of the TFTP
Software upgrade process, including any error details"
::= { management 11 }
hTTPAccessEnabled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls whether or not HTTP access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTP port. Remote
management via HTTPS is not affected by this setting. Any
change in this setting will not take effect until the
unit has been rebooted. (Factory default = Enabled)"
::= { management 12 }
telnetAccessEnabled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls whether or not Telnet access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the TELNET port. Any change in
this setting will not take effect until the unit has been
rebooted. (Factory default = Disabled)"
::= { management 13 }
hTTPPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls the port number for HTTP access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
rebooted. (Factory default = 80)"
::= { management 14 }
hTTPSPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls the port number for HTTPS access. A value
of zero will use the default port number. Availability of
HTTPS is controlled via the Licence Key. Any change in
this setting will not take effect until the unit has been
rebooted. (Factory default = 443)"
::= { management 15 }
telnetPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls the port number for TELNET access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
rebooted. (Factory default = 23)"
::= { management 16 }
hTTPSAccessEnabled OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This controls whether or not HTTPS access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the configured HTTPS Port
Number. Remote management via HTTP is not affected by
this setting. Any change in this setting will not take
effect until the unit has been rebooted. (Factory default
= Enabled)"
::= { management 17 }
tFTPServerInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
tFTPServerInternetAddress."
::= { management 18 }
tFTPServerInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"INET address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved"
::= { management 19 }
-- PhyControl group attribute definitions
--
remoteMaximumTransmitPower OBJECT-TYPE
SYNTAX INTEGER (-1000..370)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum transmit power the remote wireless unit is
permitted to use when establishing and maintaining the
wireless link, expressed in tenths of a dBm. Note that
when an IRFU is connected rather than an ODU, the
transmit power refers to the power at the transceiver
output and not the IRFU antenna port. See the User Guide
for more details"
::= { phyControl 4 }
minModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When adaptive modulation is enabled, PTP 800 will adapt
the modulation mode between a minimum and maximum
modulation mode. Depending on the region, minimum and
maximum modulation modes will be either derived from the
radio license, e.g. FCC and Industry Canada, or will be
user adjustable, e.g. ETSI.In general, a modulation mode
is defined by two aspects, a modulation and a code rate.
This integer attribute identifies the modulation aspect
of the minimum modulation mode. For example, if the
minimum modulation mode is 16QAM 0.91, this attribute
will be set to a value of 2 which identifies a modulation
of 16QAM."
::= { phyControl 6 }
minCodeRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When adaptive modulation is enabled, PTP 800 will adapt
the modulation mode between a minimum and maximum
modulation mode. Depending on the region, minimum and
maximum modulation modes will be either derived from the
radio license, e.g. FCC and Industry Canada, or will be
user adjustable, e.g. ETSI. In general, a modulation mode
is defined by two aspects, a modulation and a code rate.
This attribute is equal to 100 times the code rate aspect
of the minimum modulation mode. For example, if the
minimum modulation mode is 16QAM 0.91, this attribute
will be set to a value of 91."
::= { phyControl 7 }
maxModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When adaptive modulation is enabled, PTP 800 will adapt
the modulation mode between a minimum and maximum
modulation mode. Depending on the region, minimum and
maximum modulation modes will be either derived from the
radio license, e.g. FCC and Industry Canada, or will be
user adjustable, e.g. ETSI. In general, a modulation mode
is defined by two aspects, a modulation and a code rate.
This integer attribute identifies the modulation aspect
of the maximum modulation mode. For example, if the
maximum modulation mode is 256QAM 0.91, this attribute
will be set to a value of 6 which identifies a modulation
of 256QAM."
::= { phyControl 8 }
maxCodeRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When adaptive modulation is enabled, PTP 800 will adapt
the modulation mode between a minimum and maximum
modulation mode. Depending on the region, minimum and
maximum modulation modes will be either derived from the
radio license, e.g. FCC and Industry Canada, or will be
user adjustable, e.g. ETSI. In general, a modulation mode
is defined by two aspects, a modulation and a code rate.
This attribute is equal to 100 times the code rate aspect
of the maximum modulation mode. For example, if the
maximum modulation mode is 256QAM 0.91, this attribute
will be set to a value of 91."
::= { phyControl 9 }
-- PhyStatus group attribute definitions
--
receivePower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the receive power measured by the RFU. When an
IRFU transceiver is connected rather than an ODU, the
Receive Power refers to the power at the input to the
transceiver and not the IRFU antenna port. Expressed in
tenths of a dBm."
::= { phyStatus 1 }
vectorError OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vector Error is a measure of received signal quality.
The value is generally in the range from -6 dB to -38 dB,
a more negative number indicating a higher quality
signal. Expressed in tenths of a dB."
::= { phyStatus 2 }
transmitPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the transmit power of the RFU. When an IRFU
transceiver is connected rather than an ODU, the Transmit
Power refers to the power at the transceiver output and
not the IRFU antenna port. Expressed in tenths of a dBm."
::= { phyStatus 3 }
linkLoss OBJECT-TYPE
SYNTAX INTEGER (-500..1800)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Link Loss is a measurement of the loss in signal level
as the radio wave propagates between the antennas
installed at each end of the link. The Link Loss is only
accurate if the Antenna Gain and RF Feeder Loss have been
configured correctly at both ends of the link. Expressed
in tenths of a dB."
::= { phyStatus 5 }
receiveModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active receive modulation"
::= { phyStatus 8 }
transmitModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active transmit modulation"
::= { phyStatus 9 }
receiveCodeRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the code rate applied to the signal being
received at the wireless interface. The reported value is
the code rate multiplied by 100."
::= { phyStatus 16 }
transmitCodeRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the code rate applied to the signal
transmitted at the wireless interface. The reported value
is the code rate multiplied by 100."
::= { phyStatus 17 }
-- Alarms group attribute definitions
--
unitOutOfCalibration OBJECT-TYPE
SYNTAX INTEGER {
calibrated(0),
partial-calibration(1),
invalid-calibration(2),
bandwidth-variant-unsupported-pas-shutdown(3),
out-of-calibration-pas-shutdown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit is out of calibration"
::= { alarms 1 }
encryptionEnabledMismatch OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
encryption-enabled-mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Encryption has been enabled on one end of the wireless
link but not the other"
::= { alarms 3 }
dataPortDisabledWarning OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
disabled-by-snmp-ifadminstatus(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNMP ifAdminStatus of the data Ethernet interface
has disabled Ethernet traffic"
::= { alarms 7 }
dataPortFiberStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
installed-fiber-not-licensed(1),
no-fiber-link-established-but-los-not-detected(2),
no-fiber-link-established-and-los-detected(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the fiber interface on the data Ethernet port is not
OK, there are three possible causes: 1) the fiber
interface has been installed but disabled, 2) the
interface could not be established even though no LOS was
detected (i.e. an optical carrier was detected, which
could be due to a broken TX fiber, or because the
interface is disabled at the other end of the fiber
link), or 3) the interface could not be established and
LOS is detected (i.e. no optical carrier is detected).
NB: a change of status may generate an SNMP trap and/or
SMTP email alert"
::= { alarms 8 }
dataPortConfigurationMismatch OBJECT-TYPE
SYNTAX INTEGER {
no-error(0),
mismatch-detected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The detection of Ethernet fragments (runt packets) on
the data Ethernet port when the link is in full duplex is
an indication of an auto-negotiation or forced
configuration mismatch"
::= { alarms 9 }
softwareVersionRemoteCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates a mismatch of software versions at the two
ends of the wireless link"
::= { alarms 10 }
managementPortDisabledWarning OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
disabled-by-snmp-ifadminstatus(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNMP ifAdminStatus of the out-of-band management
Ethernet interface has disabled Ethernet traffic"
::= { alarms 12 }
rFUStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
fault(1),
unknown-3(2),
in-reset(3),
download-in-progress(4),
incompatible-firmware-version(5),
incompatible-device(6),
ifi-card-attached(7),
no-response(8),
power-supply-fault(9),
power-supply-disabled(10),
switching-memory-banks(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current status of the RFU. A state of 'ok' indicates
that the RFU is fully operational, although may not be
transmitting."
::= { alarms 16 }
managementPortConfigurationMismatch OBJECT-TYPE
SYNTAX INTEGER {
no-error(0),
mismatch-detected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The detection of Ethernet fragments (runt packets) on
the out-of-band management Ethernet port when the link is
in full duplex is an indication of an auto-negotiation or
forced configuration mismatch"
::= { alarms 17 }
secureModeAlarm OBJECT-TYPE
SYNTAX INTEGER {
secure-mode-is-active(0),
secure-mode-is-not-configured(1),
secure-mode-is-configured-but-not-active(2),
secure-mode-is-not-supported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secure mode (e.g. FIPS, UC-APL) state of the unit.
The secure mode is not configured(1) state indicates that
the unit is capable of secure mode operation, and one or
more of the following security materials has not been
configured: Key Of Keys, Private Key, Public Certificate,
DRNG Entropy Status, Wireless Encryption Key. The secure
mode mode is configured but not active(2) state indicates
that the unit is capable of secure mode operation, and
the security material has been configured, but the
configuration of interfaces is not consistent with secure
mode operation. The secure mode is not supported(3) state
indicates that the unit is not capable of secure mode
operation. The secure mode capability requires
appropriate hardware compatibility, license key and
software image."
::= { alarms 18 }
rFUPlatformCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates when the RFU currently connected to the
CMU does not match the RFU Platform which was installed.
Either re-run the Installation Wizard or connect the
correct RFU"
::= { alarms 19 }
rFUProtectionCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates when the IRFU branching unit
configuration is not compatible with the protection
configuration or if the left hand transceiver has been
configured as Secondary or the right hand transceiver has
been configured as Primary"
::= { alarms 20 }
-- Smtp group attribute definitions
--
sMTPEmailAlert OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Simple Mail Transfer Protocol is used to send equipment
alerts via email to a specified email address. This
utility can only be configured by the system
administrator"
::= { smtp 1 }
sMTPServerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of the SMTP server"
::= { smtp 2 }
sMTPServerPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port number of the SMTP server"
::= { smtp 3 }
sMTPSourceEmailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The 'from' email address used when constructing the
automatically generated e-mail message"
::= { smtp 4 }
sMTPDestinationEmailAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The 'to' email address used when constructing the
automatically generated e-mail message"
::= { smtp 5 }
sMTPEnabledMessages OBJECT-TYPE
SYNTAX BITS {
protection-state(3),
enabled-diagnostic-alarms(4),
management-port-up-down(5),
data-port-up-down(6),
wireless-link-up-down(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls which SMTP messages the unit will send"
::= { smtp 6 }
sMTPServerInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
sMTPServerInternetAddress."
::= { smtp 7 }
sMTPServerInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Internet address of the SMTP server"
::= { smtp 8 }
-- SnmpControl group attribute definitions
--
sNMPPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP port number used to access the SNMP MIB (i.e.
Gets and Sets). NB: A system reboot is required to
activate changes to this attribute"
::= { snmpControl 1 }
sNMPCommunityString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP community string. NB: A system reboot is
required to activate changes to this attribute"
::= { snmpControl 2 }
sNMPTrapVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(0),
v2c(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP protocol version to use for SNMP Traps."
::= { snmpControl 5 }
sNMPEnabledTraps OBJECT-TYPE
SYNTAX BITS {
protection-state(1),
authentication-failure(2),
enabled-diagnostic-alarms(3),
management-port-up-down(4),
data-port-up-down(5),
wireless-link-up-down(6),
cold-start(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This controls which SNMP Traps the unit will send"
::= { snmpControl 6 }
enabledDiagnosticAlarms OBJECT-TYPE
SYNTAX BITS {
data-port-configuration-mismatch(0),
unknown-7(1),
wireless-link-status(2),
sntp-sync(3),
encryption-enabled-mismatch(4),
unit-out-of-calibration(5),
link-name-mismatch(6),
alignment-mode(7),
syslog-disabled-warning(8),
management-port-status(9),
data-port-status(10),
rfu-status(11),
management-port-disabled-warning(12),
management-port-configuration-mismatch(13),
data-port-fiber-status(14),
data-port-disabled-warning(15),
software-version-mismatch(18),
syslog-client-disabled-warning(19),
rfu-power-button-pressed(20),
secure-mode(21),
syslog-local-wrapped(22),
syslog-local-nearly-full(23)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls which individual diagnostic alarms are
enabled."
::= { snmpControl 7 }
enabledDiagnosticProtectionAlarms OBJECT-TYPE
SYNTAX BITS {
end-wireless-receive-signal-status(0),
protection-interface-status(1),
management-port-ethernet-speed-status(2),
data-port-ethernet-speed-status(3),
licensed-transmit-capacity-status(4),
wireless-receive-signal-status(5),
protection-configuration-status(6),
protection-availability-status(7),
rx-diversity-availability-status(13),
rx-diversity-configuration-status(14),
rx-diversity-data-port-status(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls which individual diagnostic protection alarms
are enabled."
::= { snmpControl 8 }
sNMPTrapTableNumber OBJECT-TYPE
SYNTAX INTEGER (2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the sNMPTrapTable."
::= { snmpControl 9 }
-- SNMPTrapTable group attribute definitions
--
sNMPTrapTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SNMP trap value, used to index the SNMPTrapTable."
::= { sNMPTrapTableEntry 1 }
sNMPTrapIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address to which all SNMP Traps are sent. NB: A
system reboot is required to activate changes to this
attribute."
::= { sNMPTrapTableEntry 2 }
sNMPTrapPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination port for SNMP Traps (default=162). NB: A
system reboot is required to activate changes to this
attribute."
::= { sNMPTrapTableEntry 3 }
sNMPTrapInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
sNMPTrapInternetAddress."
::= { sNMPTrapTableEntry 4 }
sNMPTrapInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Internet address to which all SNMP Traps are sent."
::= { sNMPTrapTableEntry 5 }
sNMPTrapReceiverEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value of 0 disables the sending of SNMP trap to
corresponding receiver. A value of 1 enables the sending
of SNMP trap to corresponding receiver."
::= { sNMPTrapTableEntry 6 }
-- Sntp group attribute definitions
--
sNTPState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNTP control state"
::= { sntp 1 }
sNTPPollInterval OBJECT-TYPE
SYNTAX INTEGER (60..43200)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNTP server polling interval"
::= { sntp 4 }
sNTPSync OBJECT-TYPE
SYNTAX INTEGER {
no-sync(0),
in-sync(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If SNTP Sync fails then check the server settings in the
Remote Management page, or disable SNTP. NB: a change of
state may generate an SNMP trap and/or SMTP email alert"
::= { sntp 5 }
sNTPLastSync OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last SNTP sync time"
::= { sntp 6 }
systemClock OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"System clock presented as local time"
::= { sntp 7 }
timeZone OBJECT-TYPE
SYNTAX INTEGER {
gmt-minus-1200(0),
gmt-minus-1130(1),
gmt-minus-1100(2),
gmt-minus-1030(3),
gmt-minus-1000(4),
gmt-minus-0930(5),
gmt-minus-0900(6),
gmt-minus-0830(7),
gmt-minus-0800(8),
gmt-minus-0730(9),
gmt-minus-0700(10),
gmt-minus-0630(11),
gmt-minus-0600(12),
gmt-minus-0530(13),
gmt-minus-0500(14),
gmt-minus-0430(15),
gmt-minus-0400(16),
gmt-minus-0330(17),
gmt-minus-0300(18),
gmt-minus-0230(19),
gmt-minus-0200(20),
gmt-minus-0130(21),
gmt-minus-0100(22),
gmt-minus-0030(23),
gmt-zero(24),
gmt-plus-0030(25),
gmt-plus-0100(26),
gmt-plus-0130(27),
gmt-plus-0200(28),
gmt-plus-0230(29),
gmt-plus-0300(30),
gmt-plus-0330(31),
gmt-plus-0400(32),
gmt-plus-0430(33),
gmt-plus-0500(34),
gmt-plus-0530(35),
gmt-plus-0600(36),
gmt-plus-0630(37),
gmt-plus-0700(38),
gmt-plus-0730(39),
gmt-plus-0800(40),
gmt-plus-0830(41),
gmt-plus-0900(42),
gmt-plus-0930(43),
gmt-plus-1000(44),
gmt-plus-1030(45),
gmt-plus-1100(46),
gmt-plus-1130(47),
gmt-plus-1200(48),
gmt-plus-1230(49),
gmt-plus-1300(50)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time zone offsets from Greenwich Mean Time (GMT)"
::= { sntp 8 }
daylightSaving OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Daylight Saving Time"
::= { sntp 9 }
sNTPPrimaryServer OBJECT-TYPE
SYNTAX INTEGER {
server-1(0),
server-2(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the primary SNTP server, determining the order
in which the servers are tried."
::= { sntp 10 }
sNTPPrimaryServerDeadTime OBJECT-TYPE
SYNTAX INTEGER (0..86400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time (in seconds) to wait before retrying communications
with an unresponsive primary SNTP server. Setting the
value to 0 disables the timer."
::= { sntp 11 }
sNTPServerRetries OBJECT-TYPE
SYNTAX INTEGER (0..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of times the PTP will retry after an SNTP server
fails to respond."
::= { sntp 12 }
sNTPServerTimeout OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time (in seconds) the PTP will wait for a response from
an SNTP server."
::= { sntp 13 }
sNTPServerTableNumber OBJECT-TYPE
SYNTAX INTEGER (2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the SNTPServerTable."
::= { sntp 14 }
-- SNTPServerTable group attribute definitions
--
sNTPServerTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Index range for the SNTPServerTable."
::= { sNTPServerTableEntry 1 }
sNTPServerIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of a valid SNTP server"
::= { sNTPServerTableEntry 2 }
sNTPServerPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP port number of the SNTP server. Defaults to port
123."
::= { sNTPServerTableEntry 3 }
sNTPServerResponse OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The most recent response received from the SNTP server,
if used"
::= { sNTPServerTableEntry 4 }
sNTPServerInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
sNTPServerInternetAddress."
::= { sNTPServerTableEntry 5 }
sNTPServerInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Internet address of a valid SNTP server"
::= { sNTPServerTableEntry 6 }
-- Reset group attribute definitions
--
systemReset OBJECT-TYPE
SYNTAX INTEGER {
running(0),
console-reboot(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to '1' will cause a system
reboot. NB: a system reboot will apply any pending new
settings held in memory"
::= { reset 1 }
-- Versions group attribute definitions
--
softwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current software version"
::= { versions 1 }
hardwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hardware platform version"
::= { versions 2 }
secondarySoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Secondary software version, used when the primary
software image is invalid or erased"
::= { versions 3 }
bootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Boot code software version"
::= { versions 4 }
-- PubStats group attribute definitions
--
receiveDataRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate received by the wireless interface. Expressed
in kbps, rounded down to nearest 100 kbps."
::= { pubStats 1 }
transmitDataRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data rate transmitted from the wireless interface.
Expressed in kbps, rounded down to nearest 100 kbps."
::= { pubStats 2 }
aggregateDataRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total data rate across the wireless interface summed
over both link directions. Expressed in kbps, rounded
down to nearest 100 kbps."
::= { pubStats 3 }
wirelessLinkAvailability OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of time that the unit has been able to
successfully demodulate the signal transmitted from the
remote end of the link. Calculated since the last reset
of the system counters. The reported value is the
percentage multiplied by 10000."
::= { pubStats 4 }
wirelessLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(0),
registering(1),
searching(2),
acquiring(3),
radar-cac(4),
initialising(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current status of the wireless link"
::= { pubStats 5 }
-- Encryption group attribute definitions
--
encryptionAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
none(0),
aes-rijndael(1),
aes-256-bit-rijndael(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Encryption Algorithm used by the wireless link. NB:
A system reboot is required to activate changes to this
attribute. NB: The same Encryption Algorithm must be
configured at BOTH ends of the link for it to function
correctly"
::= { encryption 1 }
-- Rfu group attribute definitions
--
rFURfBand OBJECT-TYPE
SYNTAX INTEGER (4000..70000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU RF band in MHz"
::= { rfu 1 }
rFUTxBandAboveRx OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Yes means RFU transmitter frequency band is above
receiver frequency band"
::= { rfu 2 }
rFUFreqSpacing OBJECT-TYPE
SYNTAX INTEGER (0..1560000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tx-Rx frequency spacing in kHz"
::= { rfu 3 }
rFUTxPowerMin OBJECT-TYPE
SYNTAX INTEGER (-100..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum transmitter power level, in 10ths of dBm"
::= { rfu 4 }
rFUTxPowerMax OBJECT-TYPE
SYNTAX INTEGER (160..370)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum transmitter power level, in 10ths of dBm"
::= { rfu 5 }
rFURxFreqMin OBJECT-TYPE
SYNTAX INTEGER (5725000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum receiver frequency in kHz"
::= { rfu 6 }
rFURxFreqMax OBJECT-TYPE
SYNTAX INTEGER (5725000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum receiver frequency in kHz"
::= { rfu 7 }
rFUTxFreqMin OBJECT-TYPE
SYNTAX INTEGER (5725000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum transmitter frequency in kHz"
::= { rfu 8 }
rFUTxFreqMax OBJECT-TYPE
SYNTAX INTEGER (5725000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum transmitter frequency in kHz"
::= { rfu 9 }
rFUSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..11))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU serial number"
::= { rfu 10 }
rFUActiveFirmwareBank OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU active firmware bank number"
::= { rfu 11 }
rFUVersionBank1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..11))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU firmware version number (nnn/ddMMYY) in bank 1"
::= { rfu 12 }
rFUVersionBank2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..11))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU firmware version number (nnn/ddMMYY) in bank 2"
::= { rfu 13 }
rFUType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU type as: RFU platform, frequency band, Tx-Rx
frequency spacing, Hi/Lo band and transmit frequency
range"
::= { rfu 14 }
rFURxRFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU RF receiver out of lock alarm"
::= { rfu 15 }
rFUTxRFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU RF transmitter out of lock alarm"
::= { rfu 16 }
rFUTxPowerAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
tx-output-failed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU transmitter output failed alarm"
::= { rfu 17 }
rFUCommonIFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm indicating when the common IF RFU synthesizer is
out of lock"
::= { rfu 18 }
rFUPowerAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
power-failed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU general power alarm"
::= { rfu 19 }
rFULockoutAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
locked-out(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU locked pending unlock code alarm"
::= { rfu 20 }
rFUCableAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
if-cable-voltage-out-of-range(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU cable detector voltage out of range alarm"
::= { rfu 21 }
rFUCableAttenuationAdjustAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
if-cable-attenuator-adjusting(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU cable attenuator not yet adjusted alarm"
::= { rfu 22 }
rFUTxPowerDegradedAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
degraded(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates when the current transmit power is more than 3
dB below or more than 3 dB above the correct transmit
power."
::= { rfu 23 }
rFURpsAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
rps-alarm-active(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU radio protection switch (RPS) alarm"
::= { rfu 24 }
rFUTxMuteStatus OBJECT-TYPE
SYNTAX INTEGER {
transmitting(0),
muted-by-user(1),
muted-due-to-configuration-error(2),
muted-due-to-rfu-fault(3),
muted-due-to-rfu-configuring(4),
muted-due-to-rfu-incompatible-with-cmu(5),
muted-due-to-inactive(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the RFU is transmitting or muted. If
it is muted, it will also indicate the reason."
::= { rfu 25 }
rFUFanAssemblyAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
partial-fan-failure(1),
total-fan-failure(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates when the IRFU transceiver fan assembly
has failed. The assembly consists of two fans and if one
fan fails, the this will report partial failure. If both
fans fail, this will report total failure"
::= { rfu 26 }
rFUHighTemperatureAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
high-temperature(1),
very-high-temperature(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates when the temperature of the IRFU transceiver
has risen above either of two thresholds. If the
temperature exceeds the High Temperature threshold, the
transmit power may reduce. If the temperature exceeds the
Very High Temperature threshold, the transceiver will
mute the transmitter"
::= { rfu 27 }
rFURFSwitchAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
fault(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates that an RF switch is not present when it
should be or that on the most recent attempt to make this
unit active, the IRFU RF Switch was not able to switch to
the correct position"
::= { rfu 28 }
rFURxIFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU IF receiver out of lock alarm"
::= { rfu 29 }
rFUTxIFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RFU IF transmitter out of lock alarm"
::= { rfu 30 }
rFUPowerButtonPressed OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
irfu-power-button-was-pressed(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IRFU power button have been pressed, IFRU has powered
down unexpectedly"
::= { rfu 31 }
rFUConnectedPlatform OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
odu-a(1),
odu-b(2),
irfu-hp(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of RFU platform currently connected to the CMU"
::= { rfu 32 }
rFUCommonRFSynthLockAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
out-of-lock(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm indicating when the common RFU RF synthesizer is
out of lock"
::= { rfu 33 }
rFUBranchingConfiguration OBJECT-TYPE
SYNTAX INTEGER {
rfu-1plus0(0),
rfu-1plus0-mhsb-ready-equal(1),
rfu-1plus0-mhsb-ready-unequal(2),
rfu-1plus1-mhsb-equal(3),
rfu-1plus1-mhsb-unequal(4),
rfu-1plus1-tx-mhsb--rx-sd(5),
rfu-2plus0(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When an IRFU is being installed, the configuration of
the IRFU branching unit must be configured. Please see
the User Guide for further details"
::= { rfu 34 }
rFUTransceiverLocation OBJECT-TYPE
SYNTAX INTEGER {
left-trx-a(0),
right-trx-b(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When a 2+0 IRFU is being installed, the user must
configure which of the two IRFU transceivers the CMU is
controlling in order to ensure correct operation"
::= { rfu 35 }
rFURfSwitchCableAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
fault(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RF switch in the IRFU is indicating an invalid
switch position. The most likely cause is a fault or a
disconnection of the cable which connects the transceiver
to the RF switch"
::= { rfu 36 }
rFUReceiveBranchingUnitLoss OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The receive loss in the IRFU branching unit, expressed
in tenths of a dB. The branching unit is a component of
the IRFU which is situated between the IRFU transceiver
and IRFU antenna port. It provides the necessary
filtering, isolation and coupling."
::= { rfu 37 }
rFUTransmitBranchingUnitLoss OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The transmit loss in the IRFU branching unit, expressed
in tenths of a dB. The branching unit is a component of
the IRFU which is situated between the IRFU transceiver
and IRFU antenna port. It provides the necessary
filtering, isolation and coupling."
::= { rfu 38 }
-- RadioLicense group attribute definitions
--
radioLicenseIdentifier OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license identifier"
::= { radioLicense 1 }
radioLicenseBand OBJECT-TYPE
SYNTAX INTEGER {
band-lower-6-ghz(0),
band-7-ghz(1),
band-8-ghz(2),
band-11-ghz(3),
band-13-ghz(4),
band-15-ghz(5),
band-18-ghz(6),
band-23-ghz(7),
band-26-ghz(8),
band-32-ghz(9),
band-38-ghz(10),
band-upper-6-ghz(11),
band-28-ghz(12),
band-42-ghz(13),
band-unsupported(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license band"
::= { radioLicense 2 }
radioLicenseRegion OBJECT-TYPE
SYNTAX INTEGER {
etsi(0),
fcc(1),
canada(2),
brazil(3),
ntia(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license region"
::= { radioLicense 3 }
radioLicenseTxFreq OBJECT-TYPE
SYNTAX INTEGER (5925000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license transmit frequency in kHz"
::= { radioLicense 4 }
radioLicenseRxFreq OBJECT-TYPE
SYNTAX INTEGER (5925000..70000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license receive frequency in kHz"
::= { radioLicense 5 }
radioLicenseBandwidth OBJECT-TYPE
SYNTAX INTEGER {
bw-7-mhz(0),
bw-10-mhz(1),
bw-1375-mhz(2),
bw-14-mhz(3),
bw-20-mhz(4),
bw-275-mhz(5),
bw-28-mhz(6),
bw-30-mhz(7),
bw-40-mhz(8),
bw-50-mhz(9),
bw-55-mhz(10),
bw-56-mhz(11),
bw-80-mhz(12),
bw-25-mhz(13),
bw-60-mhz(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license bandwidth"
::= { radioLicense 6 }
radioLicenseMaxEIRP OBJECT-TYPE
SYNTAX INTEGER (-300..1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum Effective Isotropic Radiated Power (EIRP)
permitted by the license. Expressed in 10ths of dBm"
::= { radioLicense 7 }
radioLicenseModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license modulation"
::= { radioLicense 8 }
radioLicenseCodeRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radio license code rate, multiplied by 100 to give two
decimal places of precision"
::= { radioLicense 9 }
radioLicenseIncompatibleAlarm OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
radio-license-incompatible-with-rfu(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the radio license is incompatible with the
attached RFU. Re-run Installation to correct the issue"
::= { radioLicense 10 }
radioLicenseMinModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Certain licensing authorities, for example FCC and
Industry Canada, require adaptive modulation to be bound
by a minimum and maximum modulation mode as defined by
the radio license. This attribute is only of significance
in such regions and when adaptive modulation is enabled.
For other regions, for example ETSI, minimum and maximum
modulation mode are directly adjustable by the user and
are not defined by the radio license. In general, a
modulation mode is defined by two aspects, a modulation
and a code rate. This integer attribute identifies the
modulation aspect of the RadioLicenseMinModMode attribute
required by the radio license. For example, if
RadioLicenseMinModMode is configured for 16QAM 0.79, this
attribute will be set to a value of 2 which identifies a
modulation of 16QAM."
::= { radioLicense 11 }
radioLicenseMinCodeRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Certain licensing authorities, for example FCC and
Industry Canada, require adaptive modulation to be bound
by a minimum and maximum modulation mode as defined by
the radio license. This attribute is only of significance
in such regions and when adaptive modulation is enabled.
For other regions, for example ETSI, minimum and maximum
modulation mode are directly adjustable by the user and
are not defined by the radio license. In general, a
modulation mode is defined by two aspects, a modulation
and a code rate. This attribute is equal to 100 times the
code rate aspect of the RadioLicenseMinModMode attribute
required by the radio license. For example, if
RadioLicenseMinModMode is configured for QPSK 0.80, this
attribute will read 80."
::= { radioLicense 12 }
radioLicenseMaxModulation OBJECT-TYPE
SYNTAX INTEGER {
mod-qpsk(0),
mod-8psk(1),
mod-16qam(2),
mod-32qam(3),
mod-64qam(4),
mod-128qam(5),
mod-256qam(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Certain licensing authorities, for example FCC and
Industry Canada, require adaptive modulation to be bound
by a minimum and maximum modulation mode as defined by
the radio license. This attribute is only of significance
in such regions and when adaptive modulation is enabled.
For other regions, for example ETSI, minimum and maximum
modulation mode are directly adjustable by the user and
are not defined by the radio license. In general, a
modulation mode is defined by two aspects, a modulation
and a code rate. This integer attribute identifies the
modulation aspect of the RadioLicenseMaxModMode attribute
required by the radio license. For example, if
RadioLicenseMaxModMode is configured for 256QAM 0.91,
this attribute will be set to a value of 6 which
identifies a modulation of 256QAM."
::= { radioLicense 13 }
radioLicenseMaxCodeRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Certain licensing authorities, for example FCC and
Industry Canada, require adaptive modulation to be bound
by a minimum and maximum modulation mode as defined by
the radio license. This attribute is only of significance
in such regions and when adaptive modulation is enabled.
For other regions, for example ETSI, minimum and maximum
modulation mode are directly adjustable by the user and
are not defined by the radio license. In general, a
modulation mode is defined by two aspects, a modulation
and a code rate. This attribute is equal to 100 times the
code rate aspect of the RadioLicenseMaxModMode attribute
required by the radio license. For example, if
RadioLicenseMaxModMode is configured for 256QAM 0.91,
this attribute will read 91."
::= { radioLicense 14 }
-- ProtectionConfig group attribute definitions
--
protection OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
hot-standby-1plus1(1),
hot-standby-1plus1-with-rx-diversity(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PTP 800 supports a 1+1 Hot Standby configuration where
the wireless link is protected against hardware failure.
This requires the installation of redundant equipment at
each end of the wireless link including a secondary CMU
and RFU. At a given end of the wireless link, only one
CMU / RFU is Active at any one time, the neighbor CMU /
RFU being Inactive. When a fault is detected on the
Active CMU / RFU, the Active role will automatically
switch to the Inactive CMU / RFU. To enable functionality
associated with this feature, this attribute must be
configured for a setting of 1+1."
::= { protectionConfig 1 }
faultProtectionSwitching OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, protection switching
on detection of a fault can be enabled/disabled using
this attribute."
::= { protectionConfig 2 }
primarySecondaryMode OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, one
CMU must be configured as Primary, the other CMU as
Secondary. When a Protected Link initialises with no
faults, the CMUs configured as Primary will become the
Active CMUs, that is, the Primary CMUs are the preferred
CMUs. When RFUs are connected to the antenna via an
Asymmetric Coupler, the RFU which is connected to the
Primary CMU should be connected to the Main path of the
coupler. This is the path with the lowest loss."
::= { protectionConfig 3 }
numberOfAntennas OBJECT-TYPE
SYNTAX INTEGER {
one(0),
two(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This must be configured to match the number of antennas
installed at this end of the link."
::= { protectionConfig 4 }
primaryRecovery OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, the
CMU configured as Primary is the preferred unit to take
the Active role. If the Primary Recovery attribute is set
to Enabled at a given end, a protection switch back to
the preferred Primary CMU / RFU will occur autonomously
if it has stayed free of faults for a configurable period
of time determined by the Primary Recovery Period."
::= { protectionConfig 5 }
primaryRecoveryPeriod OBJECT-TYPE
SYNTAX INTEGER (0..2880)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, the
CMU configured as Primary is the preferred unit to take
the Active role. If the Primary Recovery attribute is set
to Enabled at a given end, a protection switch back to
the preferred Primary CMU / RFU will occur autonomously
if it has stayed free of faults for a configurable period
of time determined by the Primary Recovery Period."
::= { protectionConfig 6 }
requestedProtectionState OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, only one CMU / RFU
at a given end of the link is Active at any one time, the
neighbor CMU / RFU being Inactive. Use the Requested
Protection State attribute to request whether this CMU /
RFU should be in the Active or Inactive state."
::= { protectionConfig 7 }
antennaReceiveLevelDeltaThreshold OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, a CMU
will raise an alarm to the management system when the
measured receive level adjusted by antenna gain and
feeder loss is less than that of its neighbor by more
than the Antenna Receive Level Delta Threshold."
::= { protectionConfig 8 }
antennaReceiveLevelMeasurementWindow OBJECT-TYPE
SYNTAX INTEGER (1..2880)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, a CMU
will raise an alarm to the management system when the
measured receive level adjusted by antenna gain and
feeder loss is less than that of its neighbor by more
than the Antenna Receive Level Delta Threshold. The
measurements are averaged over the most recent Antenna
Receive Level Measurement Window."
::= { protectionConfig 9 }
fiberY OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"One or both ends of a 1+1 Hot Standby system can be
connected to the network using an 'Optical-Y Splitter Kit
per end'. This end configuration provides a single fiber
interface to the network. Any end which is connected to
the network using this method must have the Fiber Y
attribute set to Enabled. Please note: CMUs must be
loaded with boot code version 03-00 or later and recovery
version 04-00 or later for Fiber Y to work correctly."
::= { protectionConfig 12 }
rxDiversityVlanTpid OBJECT-TYPE
SYNTAX INTEGER {
ieee-8021q-tagged-c-tag-type-8100(0),
ieee-8021ad-tagged-s-tag-or-b-tag-type-88a8(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When Receive Diversity is enabled, the Inactive CMU
sends Rx Diversity Ethernet Frames to the Active CMU.
These Ethernet Frames must be VLAN tagged and this
attribute controls whether the frames are tagged using
the TPID defined by 802.1Q or the TPID defined by
802.1ad."
::= { protectionConfig 14 }
rxDiversityVid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When Receive Diversity is enabled, the Inactive CMU
sends Rx Diversity Ethernet Frames to the Active CMU.
These Ethernet Frames must be VLAN tagged and this
attribute controls the VLAN Identifier"
::= { protectionConfig 15 }
-- ProtectionStatus group attribute definitions
--
protectionAvailabilityStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
not-protected(1),
not-protecting(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Protection
Availability Status attribute indicates whether the
Active unit is currently being protected by the Inactive
unit. If it isn't being protected, the Active unit will
report Not Protected and the Inactive unit will report
Not Protecting."
::= { protectionStatus 2 }
protectionConfigurationStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
configuration-not-protecting(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, this attribute will
indicate whether the configuration will support
protection."
::= { protectionStatus 3 }
protectionState OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, only one CMU / RFU
at a given end of the link is Active at any one time, the
neighbor CMU / RFU being Inactive. The Protection State
attribute indicates whether a CMU / RFU is in the Active
or Inactive state."
::= { protectionStatus 4 }
activeUnit OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"At a given end of a 1+1 Hot Standby configuration, one
CMU must be configured as Primary, the other CMU as
Secondary. When a Protected Link initialises with no
faults, the CMU configured as Primary will become the
Active CMU, that is, the Primary CMU is the preferred
CMUs. The Active Unit attribute indicates whether the
active unit is configured as Primary or Secondary."
::= { protectionStatus 5 }
protectionSwitchCause OBJECT-TYPE
SYNTAX INTEGER {
no-previous-protection-switch(0),
neighbor-cmu-connected-but-not-responding(1),
rfu-not-responding(2),
rfu-rx-rf-synth-out-of-lock(3),
rfu-tx-rf-synth-out-of-lock(4),
rfu-common-rf-synth-out-of-lock(5),
rfu-cable-failure(6),
rfu-cable-attenuator-adjustment-failure(7),
rfu-tx-power-degraded(8),
data-port-down(9),
management-port-down(10),
wireless-receive-signal-not-detected(11),
byte-error-ratio-over-threshold(12),
code-word-error-ratio-over-threshold(13),
cmu-rebooting(14),
configuration-not-protecting(15),
wireless-receive-signal-not-detected-at-remote-end(16),
byte-error-ratio-over-threshold-at-remote-end(17),
code-word-error-ratio-over-threshold-at-remote-end(18),
multiple-receive-failure-at-remote-end(19),
primary-recovery(20),
managed-protection-switch(21),
rfu-rx-if-synth-out-of-lock(22),
rfu-tx-if-synth-out-of-lock(23),
rfu-common-if-synth-out-of-lock(24),
rfu-very-high-temperature(25)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Protection
Switch Cause attribute reports the reason for the last
protection switch."
::= { protectionStatus 6 }
endId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the End Id contains
the IP address of neighboring CMUs starting with the
highest IP address and with a space separating the
addresses. It is a single identifier of neighboring
CMUs."
::= { protectionStatus 7 }
neighborIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Neighbor IP
Address identifies the IP Address of the neighbor CMU
connected via the Protection Interface."
::= { protectionStatus 8 }
neighborMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Neighbor MAC
Address identifies the MAC Address of the neighbor CMU
connected via the Protection Interface."
::= { protectionStatus 9 }
wirelessReceiveSignalStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
not-detected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Wireless Receive Signal Status indicates if the
receiver is able to demodulate the transmit signal from
the remote end of the link. If it cannot demodulate the
signal, a protection switch may occur in a system
configured for 1+1 Hot Standby."
::= { protectionStatus 10 }
licensedTransmitCapacityStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
less-than-neighbor(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Licensed
Transmit Capacity Status attribute indicates when the
Licensed Transmit Capacity is below that of its
neighbor."
::= { protectionStatus 14 }
dataPortEthernetSpeedStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
less-than-neighbor(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Data Port
Ethernet Speed Status attribute indicates if the Ethernet
Speed of the Data Port is below that of its neighbor."
::= { protectionStatus 15 }
managementPortEthernetSpeedStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
less-than-neighbor(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Management Port
Ethernet Speed Status attribute indicates if the Ethernet
Speed of the Management Port is below that of its
neighbor."
::= { protectionStatus 16 }
protectionInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
neighbor-not-responding(1),
neighbor-not-connected(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, information is
shared between neighbor CMUs over the Protection
Interface. The Protection Interface Status attribute
reports whether the neighbor CMU is successfully
responding, physically disconnected or whether it is
physically connected but not responding, e.g. powered
down."
::= { protectionStatus 17 }
remotePrimaryIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Primary
IP Address reports the IP address of the CMU which is
configured as Primary at the remote end of the wireless
link."
::= { protectionStatus 18 }
remoteSecondaryIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Secondary
IP Address reports the IP address of the CMU which is
configured as Secondary at the remote end of the wireless
link."
::= { protectionStatus 19 }
remotePrimaryMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Primary
MAC Address reports the MAC address of the CMU which is
configured as Primary at the remote end of the wireless
link."
::= { protectionStatus 20 }
remoteSecondaryMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Secondary
MAC Address reports the MAC address of the CMU which is
configured as Secondary at the remote end of the wireless
link."
::= { protectionStatus 21 }
remotePrimarySecondaryMode OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, this attribute
identifies whether the Active Unit at the remote end of
the link is configured as Primary or Secondary."
::= { protectionStatus 22 }
transmitterStatus OBJECT-TYPE
SYNTAX INTEGER {
muted(0),
transmitting(1),
inactive(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the RFU is transmitting or muted. In a
1+1 Hot Standby configuration, it will also indicate if
the RFU is Inactive and therefore ready to transmit."
::= { protectionStatus 23 }
endWirelessReceiveSignalStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
not-detected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The End Wireless Receive Signal Status indicates if the
end of a link is unable to demodulate the signal
transmitted from the remote end of the link. When
Protection is set to 1+1 Hot Standby, this attribute will
indicate Not Detected if the Active CMU is unable to
demodulate the wireless signal. When Receive Diversity is
enabled, this attribute will indicate Not Detected if
both the Active and Inactive CMUs are unable to
demodulate the wireless signal."
::= { protectionStatus 26 }
rxDiversityDataPortStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
not-protecting(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When Receive Diversity is enabled, the Inactive CMU
sends Rx Diversity Ethernet Frames to the Active CMU.
Before sending these frames, the Data Port MUST be
negotiated at 1000 Mbps. This attribute indicates if this
is not the case"
::= { protectionStatus 27 }
rxDiversityAvailabilityStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
not-protected(1),
not-protecting(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Rx Diversity Availability Status attribute will
indicate when Receive Diversity is not operating
correctly, either due to a fault or due to an incorrect
configuration"
::= { protectionStatus 28 }
rxDiversityConfigurationStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
configuration-not-protecting(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For Receive Diversity to operate correctly, certain
attributes must be configured correctly on both neighbor
CMUs. The Rx Diversity Configuration Status attribute
will indicate when this is not the case"
::= { protectionStatus 29 }
rxDiversityNeighborCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For Receive Diversity to operate correctly, both
neighbor CMUs must both be configured with the Protection
attribute set to <20>1+1 Hot Standby with Rx Diversity<74>.
The Rx Diversity Neighbor Compatibility attribute
indicates when the neighbor CMU is configured to a
different setting"
::= { protectionStatus 30 }
rxDiversityVlanTpidNeighborCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For Receive Diversity to operate correctly, both
neighbor CMUs must be configured with the same value of
Rx Diversity VLAN TPID. The Rx Diversity VLAN TPID
Neighbor Compatibility attribute indicates when this is
not the case"
::= { protectionStatus 31 }
rxDiversityVidNeighborCompatibility OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
mismatch(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For Receive Diversity to operate correctly, both
neighbor CMUs must be configured with the same value of
Rx Diversity VID. The Rx Diversity VID Neighbor
Compatibility attribute indicates when this is not the
case"
::= { protectionStatus 32 }
neighborInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
neighborInternetAddress."
::= { protectionStatus 33 }
neighborInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Neighbor
Internet Address identifies the INET Address of the
neighbor CMU connected via the Protection Interface."
::= { protectionStatus 34 }
remotePrimaryInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
remoteSecondaryInternetAddress."
::= { protectionStatus 35 }
remotePrimaryInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Primary
Internet Address reports the INET address of the CMU
which is configured as Primary at the remote end of the
wireless link."
::= { protectionStatus 36 }
remoteSecondaryInternetAddressType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ipv4(1),
ipv6(2),
ipv4z(3),
ipv6z(4),
unknown-6(5),
unknown-7(6),
unknown-8(7),
unknown-9(8),
unknown-10(9),
unknown-11(10),
unknown-12(11),
unknown-13(12),
unknown-14(13),
unknown-15(14),
unknown-16(15),
dns(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of Internet address specified by the associated
remoteSecondaryInternetAddress."
::= { protectionStatus 37 }
remoteSecondaryInternetAddress OBJECT-TYPE
SYNTAX InetAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Remote Secondary
Internet Address reports the INET address of the CMU
which is configured as Secondary at the remote end of the
wireless link."
::= { protectionStatus 38 }
-- ProtectionStats group attribute definitions
--
activeAvailableTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Active Available Time reports the time which the
Wireless Link Status has been Up whilst the CMU/RFU has
been in the Active role of a 1+1 Hot Standby
configuration. The reported time is since the last
statistics reset."
::= { protectionStats 5 }
activeCounterMeasurementPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For a 1+1 Hot Standby link, the elapsed time that the
Protection State of the unit has been in the active state
since the last reset of the system counters."
::= { protectionStats 6 }
activeWirelessLinkAvailability OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For a 1+1 Hot Standby link, the percentage of time that
the unit has been able to successfully demodulate the
signal transmitted from the remote end of the link whilst
the Protecion State of the unit has been active. This
attribute is not updated whilst the Protection State is
inactive. Calculated since the last reset of the system
counters. The reported value is the percentage multiplied
by 10000"
::= { protectionStats 7 }
-- AAAControl group attribute definitions
--
userTableNumber OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries in the userTable"
::= { aAAControl 1 }
-- UserTable group attribute definitions
--
userTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"used to index values in the userTable."
::= { userTableEntry 1 }
userName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User name which must be entered, along with the
appropriate password, in order to gain access to the
system."
::= { userTableEntry 2 }
userRole OBJECT-TYPE
SYNTAX INTEGER {
read-only(0),
system-administrator(1),
security-officer(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Role of the selected user. A Security Officer has access
to and can modify all settings. A System Administrator
has access to and can modify all non-security settings. A
Read Only user can view settings, but cannot make any
changes."
::= { userTableEntry 3 }
userEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable / Disable the selected user"
::= { userTableEntry 4 }
userPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User password, which must be entered in order to gain
access to the system."
::= { userTableEntry 5 }
-- SyslogControl group attribute definitions
--
syslogClient OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable the syslog client"
::= { syslogControl 1 }
syslogState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The syslog service has been enabled or disabled"
::= { syslogControl 2 }
-- Supplementary group attribute definitions
--
longitude OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..19))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The longitude of the unit, measured in decimal degrees.
This object is set by the SNMP manager and has no
internal function."
::= { supplementary 1 }
latitude OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..19))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The latitude of the unit, measured in decimal degrees.
This object is set by the SNMP manager and has no
internal function."
::= { supplementary 2 }
altitude OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The altitude of the unit, measured in metres. This
object is set by the SNMP manager and has no internal
function."
::= { supplementary 3 }
-- Enterprise TRAP definitions
--
dataPortStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { dataPortStatus }
DESCRIPTION
"Current status of the data Ethernet link. NB: a change
of state may generate an SNMP trap and/or SMTP email
alert"
::= 3
linkNameMismatchTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { linkNameMismatch }
DESCRIPTION
"Signaling was received with the wrong Link Name. Either
the Link Name is configured differently at each end of
the wireless link, or this unit is aligned to the wrong
link partner. NB: A change of value during operation may
generate an SNMP trap and/or SMTP email alert"
::= 9
alignmentModeTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { alignmentMode }
DESCRIPTION
"Indicates if the unit is undergoing alignment. NB: a
change of state during operation may generate an SNMP
trap and/or SMTP email alert"
::= 10
unitOutOfCalibrationTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { unitOutOfCalibration }
DESCRIPTION
"The unit is out of calibration"
::= 11
encryptionEnabledMismatchTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { encryptionEnabledMismatch }
DESCRIPTION
"Encryption has been enabled on one end of the wireless
link but not the other"
::= 13
dataPortDisabledWarningTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { dataPortDisabledWarning }
DESCRIPTION
"The SNMP ifAdminStatus of the data Ethernet interface
has disabled Ethernet traffic"
::= 17
dataPortFiberStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { dataPortFiberStatus }
DESCRIPTION
"If the fiber interface on the data Ethernet port is not
OK, there are three possible causes: 1) the fiber
interface has been installed but disabled, 2) the
interface could not be established even though no LOS was
detected (i.e. an optical carrier was detected, which
could be due to a broken TX fiber, or because the
interface is disabled at the other end of the fiber
link), or 3) the interface could not be established and
LOS is detected (i.e. no optical carrier is detected).
NB: a change of status may generate an SNMP trap and/or
SMTP email alert"
::= 18
dataPortConfigurationMismatchTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { dataPortConfigurationMismatch }
DESCRIPTION
"The detection of Ethernet fragments (runt packets) on
the data Ethernet port when the link is in full duplex is
an indication of an auto-negotiation or forced
configuration mismatch"
::= 19
softwareVersionRemoteCompatibilityTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { softwareVersionRemoteCompatibility }
DESCRIPTION
"Indicates a mismatch of software versions at the two
ends of the wireless link"
::= 20
sNTPSyncTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { sNTPSync }
DESCRIPTION
"If SNTP Sync fails then check the server settings in the
Remote Management page, or disable SNTP. NB: a change of
state may generate an SNMP trap and/or SMTP email alert"
::= 21
managementPortStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { managementPortStatus }
DESCRIPTION
"Current status of the out-of-band management Ethernet
link"
::= 23
managementPortDisabledWarningTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { managementPortDisabledWarning }
DESCRIPTION
"The SNMP ifAdminStatus of the out-of-band management
Ethernet interface has disabled Ethernet traffic"
::= 24
rFUStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { rFUStatus }
DESCRIPTION
"Current status of the RFU. A state of 'ok' indicates
that the RFU is fully operational, although may not be
transmitting."
::= 27
managementPortConfigurationMismatchTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { managementPortConfigurationMismatch }
DESCRIPTION
"The detection of Ethernet fragments (runt packets) on
the out-of-band management Ethernet port when the link is
in full duplex is an indication of an auto-negotiation or
forced configuration mismatch"
::= 28
wirelessLinkStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { wirelessLinkStatus }
DESCRIPTION
"Current status of the wireless link"
::= 29
protectionAvailabilityStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { protectionAvailabilityStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Protection
Availability Status attribute indicates whether the
Active unit is currently being protected by the Inactive
unit. If it isn't being protected, the Active unit will
report Not Protected and the Inactive unit will report
Not Protecting."
::= 31
protectionConfigurationStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { protectionConfigurationStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, this attribute will
indicate whether the configuration will support
protection."
::= 32
protectionStateTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { protectionState }
DESCRIPTION
"In a 1+1 Hot Standby configuration, only one CMU / RFU
at a given end of the link is Active at any one time, the
neighbor CMU / RFU being Inactive. The Protection State
attribute indicates whether a CMU / RFU is in the Active
or Inactive state."
::= 33
wirelessReceiveSignalStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { wirelessReceiveSignalStatus }
DESCRIPTION
"The Wireless Receive Signal Status indicates if the
receiver is able to demodulate the transmit signal from
the remote end of the link. If it cannot demodulate the
signal, a protection switch may occur in a system
configured for 1+1 Hot Standby."
::= 34
licensedTransmitCapacityStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { licensedTransmitCapacityStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Licensed
Transmit Capacity Status attribute indicates when the
Licensed Transmit Capacity is below that of its
neighbor."
::= 36
dataPortEthernetSpeedStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { dataPortEthernetSpeedStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Data Port
Ethernet Speed Status attribute indicates if the Ethernet
Speed of the Data Port is below that of its neighbor."
::= 37
managementPortEthernetSpeedStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { managementPortEthernetSpeedStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, the Management Port
Ethernet Speed Status attribute indicates if the Ethernet
Speed of the Management Port is below that of its
neighbor."
::= 38
protectionInterfaceStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { protectionInterfaceStatus }
DESCRIPTION
"In a 1+1 Hot Standby configuration, information is
shared between neighbor CMUs over the Protection
Interface. The Protection Interface Status attribute
reports whether the neighbor CMU is successfully
responding, physically disconnected or whether it is
physically connected but not responding, e.g. powered
down."
::= 39
syslogStateTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { syslogState }
DESCRIPTION
"The syslog service has been enabled or disabled"
::= 40
syslogLocalNearlyFullTrap TRAP-TYPE
ENTERPRISE ptpTraps
DESCRIPTION "The syslog local log is nearly full (90%)"
::= 41
syslogLocalWrappedTrap TRAP-TYPE
ENTERPRISE ptpTraps
DESCRIPTION "The syslog local log has wrapped"
::= 42
secureModeAlarmTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { secureModeAlarm }
DESCRIPTION
"The secure mode (e.g. FIPS, UC-APL) state of the unit.
The secure mode is not configured(1) state indicates that
the unit is capable of secure mode operation, and one or
more of the following security materials has not been
configured: Key Of Keys, Private Key, Public Certificate,
DRNG Entropy Status, Wireless Encryption Key. The secure
mode mode is configured but not active(2) state indicates
that the unit is capable of secure mode operation, and
the security material has been configured, but the
configuration of interfaces is not consistent with secure
mode operation. The secure mode is not supported(3) state
indicates that the unit is not capable of secure mode
operation. The secure mode capability requires
appropriate hardware compatibility, license key and
software image."
::= 43
endWirelessReceiveSignalStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { endWirelessReceiveSignalStatus }
DESCRIPTION
"The End Wireless Receive Signal Status indicates if the
end of a link is unable to demodulate the signal
transmitted from the remote end of the link. When
Protection is set to 1+1 Hot Standby, this attribute will
indicate Not Detected if the Active CMU is unable to
demodulate the wireless signal. When Receive Diversity is
enabled, this attribute will indicate Not Detected if
both the Active and Inactive CMUs are unable to
demodulate the wireless signal."
::= 44
rxDiversityDataPortStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { rxDiversityDataPortStatus }
DESCRIPTION
"When Receive Diversity is enabled, the Inactive CMU
sends Rx Diversity Ethernet Frames to the Active CMU.
Before sending these frames, the Data Port MUST be
negotiated at 1000 Mbps. This attribute indicates if this
is not the case"
::= 45
rxDiversityAvailabilityStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { rxDiversityAvailabilityStatus }
DESCRIPTION
"The Rx Diversity Availability Status attribute will
indicate when Receive Diversity is not operating
correctly, either due to a fault or due to an incorrect
configuration"
::= 46
rxDiversityConfigurationStatusTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { rxDiversityConfigurationStatus }
DESCRIPTION
"For Receive Diversity to operate correctly, certain
attributes must be configured correctly on both neighbor
CMUs. The Rx Diversity Configuration Status attribute
will indicate when this is not the case"
::= 47
rFUPowerButtonPressedTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { rFUPowerButtonPressed }
DESCRIPTION
"IRFU power button have been pressed, IFRU has powered
down unexpectedly"
::= 48
syslogClientTrap TRAP-TYPE
ENTERPRISE ptpTraps
VARIABLES { syslogClient }
DESCRIPTION
"Enable or disable the syslog client"
::= 49
END
Reference in New Issue Copy Permalink