david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cambium/WHISP-SM-MIB

4157 lines
112 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- whisp-sm-mib.mib
-- GENERATED FROM ui_db.xml
--
-- *****************************************************************************************
-- Copyright 2005 - 2015 (c), Cambium Networks
-- Cambium Networks Confidential Proprietary
-- *****************************************************************************************
--
-- Canopy SM and Backhaul Timing Slave MIB definitions.
--
-- *****************************************************************************************
WHISP-SM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, TimeTicks, IpAddress, Unsigned32
FROM SNMPv2-SMI
DisplayString, PhysAddress, MacAddress
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
WhispLUID, WhispMACAddress
FROM WHISP-TCV2-MIB
whispModules, whispBox, whispAps, whispSm
FROM WHISP-GLOBAL-REG-MIB
dhcpRfPublicIp, whispBoxEsn
FROM WHISP-BOX-MIBV2-MIB
;
whispSmMibModule MODULE-IDENTITY
LAST-UPDATED "200304150000Z"
ORGANIZATION "Cambium Networks"
CONTACT-INFO
"Cambium Networks Support
email: support@cambiumnetworks.com"
DESCRIPTION
"This module contains MIB definitions for Subscriber Modem."
::= {whispModules 13}
-- -------------------------------------------------------------------------
-- Top Level Registrations
whispSmConfig OBJECT IDENTIFIER ::= {whispSm 1}
whispSmSecurity OBJECT IDENTIFIER ::= {whispSm 7}
whispSmStatus OBJECT IDENTIFIER ::= {whispSm 2}
whispSmGroups OBJECT IDENTIFIER ::= {whispSm 3}
whispSmEvent OBJECT IDENTIFIER ::= {whispSm 4}
whispSmDfsEvent OBJECT IDENTIFIER ::= {whispSmEvent 1}
whispSmSpAnEvent OBJECT IDENTIFIER ::= {whispSmEvent 2}
whispSmDHCPClientEvent OBJECT IDENTIFIER ::= {whispSmEvent 3}
whispSmControls OBJECT IDENTIFIER ::= {whispSm 8}
-- -------------------------------------------------------------------------
-- Subscriber Modem and Backhaul timing slave configuration
rfScanList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF scan list string.
The frequencies vary by product and region.
If the frequency list is too long an SNMP error will be returned. If this occurs please refer to
OID rfScanListTable, which will allow user to enter the full range of available frequencies.
String length is limited to SNMP buffer size, so while all frequencies may be set, not all may be retrieved.
Special settings:
0: none.
all: All frequencies in the band(s) supported by the radio will be selected.
all49, all51, all52: Available only for 450i 5 GHz wideband radio.
all54, all57: Available only for 450 and 450i 5 GHz radios.
When doing a set, separate values with comma with no white space between values."
::={whispSmConfig 1}
powerUpMode OBJECT-TYPE
SYNTAX INTEGER {
operational(0),
aim(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SM Power Up Mode With No 802.3 Link.
0 - Power up in Operational mode.
1 - Power up in Aim mode."
::={whispSmConfig 2}
lanIpSm OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LAN IP."
::={whispSmConfig 3}
lanMaskSm OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LAN subnet mask."
::={whispSmConfig 4}
defaultGwSm OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default gateway."
::={whispSmConfig 5}
networkAccess OBJECT-TYPE
SYNTAX INTEGER {
localIP(0),
publicIP(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network accessibility. Public or local IP.
For multipoint only."
::={whispSmConfig 6}
authKeySm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication key. It should be equal or less than 32
characters long."
::={whispSmConfig 7}
enable8023link OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"To enable or disable 802.3 link. For SMs only. Deprecated: Use enable8023linkBox instead."
::={whispSmConfig 8}
authKeyOption OBJECT-TYPE
SYNTAX INTEGER {
useDefault(0),
useKeySet(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option is for SMs only. Backhaul timing slave always
uses the set key.
0 - Use default key.
1 - Use set key."
::={whispSmConfig 9}
timingPulseGated OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 - Disable (Always propagate the frame timing pulse).
1 - Enable (If SM out of sync then dont propagate the frame timing pulse)."
::={whispSmConfig 10}
-- NAPT configuration
naptPrivateIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAPT private IP address. Only the first three bytes can be
changed when NAPT is enabled."
::={whispSmConfig 11}
naptPrivateSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAPT private subnet mask. Only the last byte can be
changed when NAPT is enabled. The address will always be:
255.255.255.x."
::={whispSmConfig 12}
naptPublicIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of NAPT Public Interface. The variable is available
only when NAPT is enabled."
::={whispSmConfig 13}
naptPublicSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnet mask for NAPT Public Interface. The variable is available
only when NAPT is enabled."
::={whispSmConfig 14}
naptPublicGatewayIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of NAPT Public Interface Gateway. The variable is available
only when NAPT is enabled."
::={whispSmConfig 15}
naptRFPublicIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of RF Public Interface. The variable is available
only when NAPT is enabled."
::={whispSmConfig 16}
naptRFPublicSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnet mask of RF Public Interface. The variable is available
only when NAPT is enabled."
::={whispSmConfig 17}
naptRFPublicGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address of RF Public Interface Gateway. The variable is
available only when NAPT is enabled."
::={whispSmConfig 18}
naptEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable NAPT. For multipoint only.
1=Enable NAPT, 0=Disable NAPT."
::={whispSmConfig 19}
arpCacheTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ARP cache time out in unit of minutes. For multipoint only.
Range from 1-30."
::={whispSmConfig 20}
tcpGarbageCollectTmout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of minutes for TCP garbage collection. For multipoint only.
Range 4-1440."
::={whispSmConfig 21}
udpGarbageCollectTmout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of minutes for UDP garbage collection. For multipoint only.
Range 1-1440."
::={whispSmConfig 22}
-- DHCP configuration
dhcpClientEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To enable or disable DHCP client. For multipoint SM's
with NAPT enabled."
::={whispSmConfig 23}
dhcpServerEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable DHCP server. For multipoint SM's
with NAPT enabled."
::={whispSmConfig 24}
dhcpServerLeaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of days for DHCP server lease time. For multipoint
SM's with NAPT enabled. Range from 1-30."
::={whispSmConfig 25}
dhcpIPStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last byte will be set for the starting IP that
our DHCP server gives away. The first 3 bytes of the
starting IP are the same as those of NAPT private IP"
::={whispSmConfig 26}
dnsAutomatic OBJECT-TYPE
SYNTAX INTEGER {
manually(0),
automatically(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To have DHCP Server obtain DNS information automatically or manually."
::={whispSmConfig 27}
prefferedDNSIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferred DNS IP when we are configured for static DNS
(Not used when configured for automatic DNS)."
::={whispSmConfig 28}
alternateDNSIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The alternate DNS IP when we are configured for static DNS
(Not used when configured for automatic DNS)."
::={whispSmConfig 29}
dmzIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only the last byte of DMZ Host IP will be set.
The first 3 bytes of DMZ IP are the same as those of
NAPT private IP."
::={whispSmConfig 30}
dmzEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable DMZ host functionality."
::={whispSmConfig 31}
dhcpNumIPsToLease OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of IP addresses that our DHCP server can give away."
::={whispSmConfig 32}
pppoeFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set PPPoE packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 33}
smbFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set SMB packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 34}
snmpFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set SNMP packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 35}
userP1Filter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 1 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 36}
userP2Filter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 2 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 37}
userP3Filter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 3 packet filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 38}
allOtherIpFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set all other IPv4 packet filter when NAT
is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 39}
upLinkBCastFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This variable is currently obsolete."
::={whispSmConfig 40}
arpFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set ARP packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 41}
allOthersFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set all other packet filter when NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 42}
-- User Defined Port Filtering Configuration
userDefinedPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An integer value of number one user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 43}
port1TCPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 1 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 44}
port1UDPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 1 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 45}
userDefinedPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An integer value of number two user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 46}
port2TCPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 2 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 47}
port2UDPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 2 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 48}
userDefinedPort3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An integer value of number three user defined port. Range:0-65535
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 49}
port3TCPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 3 TCP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 50}
port3UDPFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set user defined port 3 UDP traffic filter.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 51}
bootpcFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set bootp client sourced packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 52}
bootpsFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set bootp server sourced packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 53}
ip4MultFilter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set IPv4 MultiCast packets filter when
NAT is disabled.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 54}
ingressVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Untagged ingress VID."
::={whispSmConfig 55}
-- CIR configuration
lowPriorityUplinkCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Low priority uplink CIR."
::={whispSmConfig 56}
lowPriorityDownlinkCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Low priority downlink CIR."
::={whispSmConfig 57}
hiPriorityChannel OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable high priority channel."
::={whispSmConfig 58}
hiPriorityUplinkCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"High priority uplink CIR."
::={whispSmConfig 59}
hiPriorityDownlinkCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"High priority downlink CIR."
::={whispSmConfig 60}
smRateAdapt OBJECT-TYPE
SYNTAX INTEGER {
onex(0),
onextwox(1),
onextwoxthreex(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation."
::={whispSmConfig 61}
upLnkDataRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sustained uplink bandwidth cap."
::={whispSmConfig 62}
upLnkLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Burst uplink bandwidth cap."
::={whispSmConfig 63}
dwnLnkDataRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sustained downlink bandwidth cap."
::={whispSmConfig 64}
dwnLnkLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Burst downlink bandwidth cap."
::={whispSmConfig 65}
dfsConfig OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
::={whispSmConfig 66}
ethAccessFilterEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To enable or disable Ethernet Port access filtering to SM Management Functions.
(0) - Ethernet access to SM Management allowed.
(1) - Ethernet access to SM Management blocked."
::={whispSmConfig 67}
ipAccessFilterEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable IP access filtering to Management functions.
(0) - IP access will be allowed from all addresses.
(1) - IP access will be controlled using allowedIPAccess1-3 entries."
::={whispSmConfig 68}
allowedIPAccess1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to SM Management from this IP.
0 is default setting to allow from all IPs."
::={whispSmConfig 69}
allowedIPAccess2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to SM Management from this IP.
0 is default setting to allow from all IPs."
::={whispSmConfig 70}
allowedIPAccess3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to SM Management from this IP.
0 is default setting to allow from all IPs."
::={whispSmConfig 71}
rfDhcpState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable RF Interface DHCP feature."
::={whispSmConfig 72}
-- Broadcast MIR Feature.
bCastMIR OBJECT-TYPE
SYNTAX INTEGER {
disabled(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable.
Units are as per bCastMIRUnits variable. Set the units first and then set this value."
::={whispSmConfig 73}
bhsReReg OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh."
::={whispSmConfig 74}
smLEDModeFlag OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
revised(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)"
::={whispSmConfig 75}
ethAccessEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable Ethernet Port access to SM Management Functions.
(1) - Ethernet access to SM Management allowed.
(0) - Ethernet access to SM Management blocked."
::={whispSmConfig 76}
pppoeEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP."
::={whispSmConfig 77}
pppoeAuthenticationType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
chap-pap(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Authentication Type to either None or CHAP/pap"
::={whispSmConfig 78}
pppoeAccessConcentrator OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters"
::={whispSmConfig 79}
pppoeServiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Service Name. Less than or equal to 32 characters"
::={whispSmConfig 80}
pppoeUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Username. Less than or equal to 32 characters"
::={whispSmConfig 81}
pppoePassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Password. Less than or equal to 32 characters"
::={whispSmConfig 82}
pppoeTCPMSSClampEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets.
This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are
using PMTUD reliably, this should not be needed."
::={whispSmConfig 83}
pppoeMTUOverrideEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
the smaller MTU will be used."
::={whispSmConfig 84}
pppoeMTUOverrideValue OBJECT-TYPE
SYNTAX INTEGER (0..1492)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
the smaller MTU will be used. Max MTU of a PPPoE link is 1492."
::={whispSmConfig 85}
pppoeTimerType OBJECT-TYPE
SYNTAX INTEGER {
keepAlive(1),
idleTimeout(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and
automatically redialed if the link is down. Also could be an Idle Timeout where the link will
be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers
are in seconds while Idle Timeout timers are in minutes."
::={whispSmConfig 86}
pppoeTimeoutPeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes.
Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout."
::={whispSmConfig 87}
timedSpectrumAnalysisDuration OBJECT-TYPE
SYNTAX INTEGER (10..1000)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig.
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds."
::={whispSmConfig 88}
spectrumAnalysisOnBoot OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable Spectrum Analysis on boot up for one scan through the band.
(0) - Disabled
(1) - Enabled"
::={whispSmConfig 89}
spectrumAnalysisAction OBJECT-TYPE
SYNTAX INTEGER {
stopSpectrumAnalysis(0),
startTimedSpectrumAnalysis(1),
startContinuousSpectrumAnalysis(2),
idleNoSpectrumAnalysis(3),
idleCompleteSpectrumAnalysis(4),
inProgressTimedSpectrumAnalysis(5),
inProgressContinuousSpectrumAnalysis(6)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig.
Start or stop timed or continuous Spectrum Analysis and also give status.
(0) - Stop Spectrum Analysis
(1) - Start Timed Spectrum Analysis
(2) - Start Continuous Spectrum Analysis
(3) - Idle, no Spectrum Analysis results.
(4) - Idle, Spectrum Analysis results available.
(5) - Timed or Remote Spectrum Analysis in progress.
(6) - Continuous Spectrum Analysis in progress.
Note: Continuous mode has a max of 24 hours."
::={whispSmConfig 90}
pppoeConnectOD OBJECT-TYPE
SYNTAX INTEGER {
connectOnDemand(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force a manual PPPoE connection attempt."
::={whispSmConfig 91}
pppoeDisconnectOD OBJECT-TYPE
SYNTAX INTEGER {
disconnectOnDemand(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force a manual PPPoE disconnection."
::={whispSmConfig 92}
smAntennaType OBJECT-TYPE
SYNTAX INTEGER {
integrated(0),
external(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Deprecated. See whispBoxStatus.antType for antenna type information."
::={whispSmConfig 93}
-- SM NAT Connection Type
natConnectionType OBJECT-TYPE
SYNTAX INTEGER {
staticIP(0),
dhcp(1),
pppoe(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE."
::={whispSmConfig 94}
-- SM WAN (NAT and/or PPPoE) Ping Reply Enable
wanPingReplyEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces."
::={whispSmConfig 95}
packetFilterDirection OBJECT-TYPE
SYNTAX INTEGER {
upstream(1),
downstream(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To packet filter direction when NAT is disabled. Upstream is default.
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 96}
colorCode2 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 97}
colorCodepriority2 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the second color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 98}
colorCode3 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 99}
colorCodepriority3 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the third color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 100}
colorCode4 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 101}
colorCodepriority4 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the fourth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 102}
colorCode5 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 103}
colorCodepriority5 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the fifth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 104}
colorCode6 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 105}
colorCodepriority6 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the sixth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 106}
colorCode7 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 107}
colorCodepriority7 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the seventh color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 108}
colorCode8 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 109}
colorCodepriority8 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the eighth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 110}
colorCode9 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 111}
colorCodepriority9 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the ninth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 112}
colorCode10 OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
::={whispSmConfig 113}
colorCodepriority10 OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3),
disable(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Priority setting for the tenth color code. The variable is deprecated.
See additionalColorCodePriority in whispSmConfig."
::={whispSmConfig 114}
natDNSProxyEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically.
If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases."
::={whispSmConfig 115}
allIpv4Filter OBJECT-TYPE
SYNTAX INTEGER {
filterOff(0),
filterOn(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To set all IPv4 packet filter when NAT
is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
IPv4 Mcast, User Defined Ports, and All Other IPv4).
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
::={whispSmConfig 116}
spectrumAnalysisDisplay OBJECT-TYPE
SYNTAX INTEGER {
averaging(0),
instantaneous(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The display for Spectrum Analyzer:
(0) - Averaging over entire period
(1) - Instantaneous showing the last reading"
::={whispSmConfig 117}
syslogSMXmitSetting OBJECT-TYPE
SYNTAX INTEGER {
obtain-from-AP(0),
enable(1),
disable(2)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2)."
::={whispSmConfig 118}
syslogServerApPreferred OBJECT-TYPE
SYNTAX INTEGER {
use-local(0),
use-AP-preferred(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Uses Syslog server configuration from AP/BHM if enabled and available,
otherwise uses local configuration."
::={whispSmConfig 119}
syslogMinLevelApPreferred OBJECT-TYPE
SYNTAX INTEGER {
use-local(0),
use-AP-preferred(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Uses Syslog minimum transmit level configuration from AP/BHM if available,
otherwise uses local configuration."
::={whispSmConfig 120}
syslogSMXmitControl OBJECT-TYPE
SYNTAX INTEGER {
obtain-from-AP-default-disabled(0),
obtain-from-AP-default-enabled(1),
disable(2),
enable(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state."
::={whispSmConfig 121}
eapPeerAAAServerCommonName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name"
::={whispSmConfig 126}
rfScanListBandFilter OBJECT-TYPE
SYNTAX INTEGER {
band5400(8),
band5700(9)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This element is obsolete."
::={whispSmConfig 127}
upLnkMaxBurstDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum burst uplink rate."
::={whispSmConfig 128}
dwnLnkMaxBurstDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum burst downlink rate."
::={whispSmConfig 129}
cyclicPrefixScan OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cyclic Prefix value for frequency scanning used by MIMO SMs only.
When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16"
::={whispSmConfig 130}
bandwidthScan OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bandwidth values for frequency scanning used by MIMO SMs only.
When setting use a comma delimited list of bandwidths.
For example: 10, 20"
::={whispSmConfig 131}
apSelection OBJECT-TYPE
SYNTAX INTEGER {
powerLevel(1),
optimizeForThroughput(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration.
(0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput.
(1) - Select the AP with the best receive power level.
Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc."
::={whispSmConfig 132}
radioBandscanConfig OBJECT-TYPE
SYNTAX INTEGER {
instant(0),
delayed(1),
apply(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to determine when frequency, cyclic prefix and bandwidth settings take effect for
band scanning MIMO SMs.
0 - Instant
1 - Delayed
2 - Apply changes"
::={whispSmConfig 133}
forcepoweradjust OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will force a multipoint SM to initiate an asynchronous power adjust sequence.
This is done automatically every 2 minutes."
::={whispSmConfig 134}
clearBerrResults OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This will clear the BER results."
::={whispSmConfig 135}
berrautoupdateflag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled"
::={whispSmConfig 136}
testSMBER OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0 - Disable (Return the SM to a normal operation state).
1 - Enable (Set SM into a BER test state)."
::={whispSmConfig 137}
allowedIPAccessNMLength1 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispSmConfig 138}
allowedIPAccessNMLength2 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispSmConfig 139}
allowedIPAccessNMLength3 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispSmConfig 140}
naptRemoteManage OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable-standalone(1),
enable-wan(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable Remote Management. For multipoint only.
0=Disable Remote Management,
1=Enable - Standalone Config,
2=Enable - Use WAN Interface."
::={whispSmConfig 141}
spectrumAnalysisScanBandwidth OBJECT-TYPE
SYNTAX INTEGER {
bandwidth5MHz(0),
bandwidth10MHz(1),
bandwidth20MHz(2),
bandwidth7MHz(3),
bandwidth15MHz(4),
bandwidth30MHz(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450."
::={whispSmConfig 142}
berDeModSelect OBJECT-TYPE
SYNTAX INTEGER {
qpsk(0),
qam-16(1),
qam-64(2),
qam-256(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
::={whispSmConfig 143}
multicastVCRcvRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast VC Receive Rate"
::={whispSmConfig 144}
pmp430ApRegistrationOptions OBJECT-TYPE
SYNTAX INTEGER {
pmp430(1),
pmp450(2),
both(3)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Deprecated. The 430 SM only supports PMP 450
interoperability mode."
::={whispSmConfig 145}
switchRadioModeAndReboot OBJECT-TYPE
SYNTAX INTEGER {
finishedReboot(0),
switchRadioModeAndReboot(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"As of 14.2, the 430 SM no longer supports multiple
radio modes. It only support 450 interoperability
mode."
::={whispSmConfig 146}
natTslTableSize OBJECT-TYPE
SYNTAX INTEGER (1024..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAT Translation Table Size.
Range 1024-8192."
::={whispSmConfig 147}
ingressVIDPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ingress VID VLAN Priority."
::={whispSmConfig 148}
ingressVIDPriorityMode OBJECT-TYPE
SYNTAX INTEGER {
promote-IP-priority(0),
define-priority(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ingress VID VLAN Priority Mode."
::={whispSmConfig 149}
providerVIDPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provider VID VLAN Priority."
::={whispSmConfig 150}
providerVIDPriorityMode OBJECT-TYPE
SYNTAX INTEGER {
promote-IP-priority(0),
define-priority(1),
copy-inner-tag-priority(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provider VID VLAN Priority Mode."
::={whispSmConfig 151}
additionalColorCode OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add an additional color code. Setting additionalColorCode and
additionalColorCodePriority adds an entry."
::={whispSmConfig 152}
additionalColorCodePriority OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add an additional color code priority. Setting additionalColorCode and
additionalColorCodePriority adds an entry."
::={whispSmConfig 153}
deleteAdditionalColorCode OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete an additional color code."
::={whispSmConfig 154}
bCastMIRUnits OBJECT-TYPE
SYNTAX INTEGER {
kbps(0),
pps(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR"
::={whispSmConfig 155}
txPowerControl OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Automatic control of SM TX power.
Engineering use only."
::={whispSmConfig 157}
bridgeTableSize OBJECT-TYPE
SYNTAX INTEGER (4..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge Table Size : 4 -- 4096."
::={whispSmConfig 158}
bridgeTableRestrict OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restrict forwarding packets from hosts for which MAC address is not in the bridge table."
::={whispSmConfig 159}
maxTxPowerEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Max Tx Power configuration.
This is used with OID maxTxPower to set the max transmit power.
This might be required in certain regions and frequency bands.
See User Guide for more information.
Enabling this will not allow a radio to transmit above its EIRP limit.
The AP's Transmit Power Control may still adjust the Tx power down.
SM only."
::={whispSmConfig 160}
maxTxPower OBJECT-TYPE
SYNTAX INTEGER (-30..27)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID is controled by OID maxTxPowerEnable.
This might be required in certain regions and frequency bands.
See user guide for more information.
Setting this will not allow a radio to transmit above its EIRP limit.
The AP's Transmit Power Control may still adjust the Tx power down.
SM only."
::={whispSmConfig 161}
rfScanListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RfScanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of configured scanning frequencies on the SM or BHS."
::= {whispSmConfig 156}
rfScanListEntry OBJECT-TYPE
SYNTAX RfScanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of configured scanning frequencies on the SM or BHS."
INDEX {rfScanListFrequency}
::= {rfScanListTable 1}
RfScanListEntry ::= SEQUENCE{
rfScanListFrequency INTEGER
}
rfScanListFrequency OBJECT-TYPE
SYNTAX INTEGER (0..9000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF scan list.
The frequencies vary by product and region."
::={rfScanListEntry 1}
numAuthCerts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"can have a max value of 2"
::={whispSmSecurity 2}
authenticationEnforce OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
aaa(1),
presharedkey(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enforce SM to register with specifed Auth Enabled AP"
::={whispSmSecurity 3}
-- PEAP is not supported for MPC860 platorm
phase1 OBJECT-TYPE
SYNTAX INTEGER {
eapttls(0),
eapMSChapV2(1),
eappeap(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the outer method for EAP Authentication.
Note: PEAP is not supported for MPC860 platform."
::={whispSmSecurity 4}
phase2 OBJECT-TYPE
SYNTAX INTEGER {
pap(0),
chap(1),
mschapv2(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the outer method for EAP Authentication"
::={whispSmSecurity 5}
authOuterId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..253))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EAP Peer Username"
::={whispSmSecurity 6}
authPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EAP Peer password"
::={whispSmSecurity 7}
authUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EAP Peer Identity"
::={whispSmSecurity 8}
useRealm OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of realm option."
::={whispSmSecurity 9}
realm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EAP Peer Realm"
::={whispSmSecurity 10}
certTable OBJECT-TYPE
SYNTAX SEQUENCE OF CertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CA Certificates on SM."
::= {whispSmSecurity 1}
certEntry OBJECT-TYPE
SYNTAX CertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of Certifcates."
INDEX {certIndex}
::= {certTable 1}
CertEntry ::= SEQUENCE{
certIndex INTEGER,
cert INTEGER,
action INTEGER,
certificateDN DisplayString
}
certIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User information table index."
::={certEntry 1}
cert OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: Inactive 1: Active"
::={certEntry 2}
action OBJECT-TYPE
SYNTAX INTEGER {
noop(0),
delete(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: No Operation 1: Delete Certificate"
::={certEntry 3}
certificateDN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Distinguished Name of Certificate 2"
::={certEntry 4}
-- Subscriber Modem status page
sessionStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SM registered or not."
::={whispSmStatus 1}
rssi OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio signal strength index. FSK only."
::={whispSmStatus 2}
jitter OBJECT-TYPE
SYNTAX Gauge32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A measure of multipath interference. Applicable to FSK radios only."
::={whispSmStatus 3}
airDelay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round trip delay in bits."
::={whispSmStatus 4}
radioSlicingSm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable is deprecated."
::={whispSmStatus 5}
radioTxGainSm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio transmission gain setting. Applicable to FSK radios only."
::={whispSmStatus 6}
calibrationStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Varible deprecated. Please use calibrationStatusBox."
::={whispSmStatus 7}
radioDbm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx Power level.
For MIMO this is the combined power of the horizontal and vertical paths."
::={whispSmStatus 8}
registeredToAp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP MAC address that the SM registered to."
::={whispSmStatus 9}
-- DHCP client status:
dhcpCip OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Assigned IP address to DHCP client."
::={whispSmStatus 10}
dhcpSip OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Public DHCP server IP."
::={whispSmStatus 11}
dhcpClientLease OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP client lease time."
::={whispSmStatus 12}
dhcpCSMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Public DHCP server subnet mask."
::={whispSmStatus 13}
dhcpDfltRterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Public default router IP address."
::={whispSmStatus 14}
dhcpcdns1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary public domain name server."
::={whispSmStatus 15}
dhcpcdns2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary public domain name server."
::={whispSmStatus 16}
dhcpcdns3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third public domain name server."
::={whispSmStatus 17}
dhcpDomName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Public domain name server."
::={whispSmStatus 18}
adaptRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VC adapt rate."
::={whispSmStatus 20}
radioDbmInt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio power level(integer).
For MIMO radios this is the combined power of the horiztontal and vertical paths."
::={whispSmStatus 21}
dfsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic frequency shifting status. For DFS Radio only."
::={whispSmStatus 22}
radioTxPwr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx Power level. Valid for FSK and OFDM SMs."
::={whispSmStatus 23}
activeRegion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active region of the radio."
::={whispSmStatus 24}
snmpBerLevel OBJECT-TYPE
SYNTAX INTEGER {
twoLevelOrMimoQPSK(2),
fourLevelOrMimo16QAM(4),
mimo64QAM(6),
mimo256QAM(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BER level.
For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM
For non PMP 450: 2=2 level BER, 4=4 level BER."
::={whispSmStatus 25}
nbBitsRcvd OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BER bits received (non MIMO platforms only)."
::={whispSmStatus 26}
nbPriBitsErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Primary bit errors (non MIMO platforms only)."
::={whispSmStatus 27}
nbSndBitsErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of secondary bit errors (non MIMO platforms only)."
::={whispSmStatus 28}
primaryBER OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate."
::={whispSmStatus 29}
secondaryBER OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate."
::={whispSmStatus 30}
totalBER OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate."
::={whispSmStatus 31}
minRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Min. RSSI. Applicable to FSK radios only."
::={whispSmStatus 32}
maxRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Max. RSSI. Applicable to FSK radios only."
::={whispSmStatus 33}
minJitter OBJECT-TYPE
SYNTAX Gauge32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Min. Jitter. Applicable to FSK radios only."
::={whispSmStatus 34}
maxJitter OBJECT-TYPE
SYNTAX Gauge32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Max. Jitter. Applicable to FSK radios only."
::={whispSmStatus 35}
smSessionTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SM current session timer."
::={whispSmStatus 36}
pppoeSessionStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Session Status"
::={whispSmStatus 37}
pppoeSessionID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Session ID"
::={whispSmStatus 38}
pppoeIPCPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE IPCP IP Address"
::={whispSmStatus 39}
pppoeMTUOverrideEn OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE MTU Override Setting"
::={whispSmStatus 40}
pppoeMTUValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE MTU Value"
::={whispSmStatus 41}
pppoeTimerTypeValue OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
keepAlive(1),
idleTimeout(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer."
::={whispSmStatus 42}
pppoeTimeoutValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes."
::={whispSmStatus 43}
pppoeDNSServer1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE DNS Server 1"
::={whispSmStatus 44}
pppoeDNSServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE DNS Server 2"
::={whispSmStatus 45}
pppoeControlBytesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Control Bytes Sent"
::={whispSmStatus 46}
pppoeControlBytesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Control Bytes Received"
::={whispSmStatus 47}
pppoeDataBytesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Data Bytes Sent"
::={whispSmStatus 48}
pppoeDataBytesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Data Bytes Received"
::={whispSmStatus 49}
pppoeEnabledStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE Enabled"
::={whispSmStatus 50}
pppoeTCPMSSClampEnableStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PPPoE TCP MSS Clamping Enable"
::={whispSmStatus 51}
pppoeACNameStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Access Concentrator In Use"
::={whispSmStatus 52}
pppoeSvcNameStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current PPPoE Service Name In Use"
::={whispSmStatus 53}
pppoeSessUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uptime of current PPPoE Session in ticks"
::={whispSmStatus 54}
primaryBERDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Primary Bit Error Rate.
Non MIMO platforms only."
::={whispSmStatus 55}
secondaryBERDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Secondary Bit Error Rate.
FSK platforms only."
::={whispSmStatus 56}
totalBERDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured Total Bit Error Rate.
For MIMO this is combined both paths."
::={whispSmStatus 57}
minRadioDbm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum receive power of beacon in dBm.
For MIMO radios, this is only available in the vertical path."
::={whispSmStatus 58}
maxRadioDbm OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum receive power in dBm (rounded to nearest integer)."
::={whispSmStatus 59}
pppoeSessIdleTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Idle Time of current PPPoE Session in ticks"
::={whispSmStatus 60}
radioDbmAvg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average Receive Power of the AP's beacon in dBm.
OFDM Radios only.
For MIMO this is only the verical path, as the beacon is not transmitted on horizontal."
::={whispSmStatus 61}
zoltarFPGAFreqOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FPGA peek of 70001088"
::={whispSmStatus 62}
zoltarSWFreqOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FPGA peek of 7000108C"
::={whispSmStatus 63}
airDelayns OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round trip delay in nanoseconds."
::={whispSmStatus 64}
currentColorCode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered."
::={whispSmStatus 65}
currentColorCodePri OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2),
tertiary(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current priority of the Registered color code"
::={whispSmStatus 66}
currentChanFreq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Current Channel Frequency of the AP/BHM when in session."
::={whispSmStatus 67}
linkQualityBeacon OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering only.
Link Quality for incoming beacons.
For Gen II OFDM radios and forward.
For PMP 450 and forward this is vertical path."
::={whispSmStatus 68}
dhcpServerPktXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets transmitted by SM DHCP Server"
::={whispSmStatus 72}
dhcpServerPktRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received by SM DHCP Server"
::={whispSmStatus 73}
dhcpServerPktToss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets tossed by SM DHCP Server"
::={whispSmStatus 74}
receiveFragmentsModulationPercentage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
The percentage of recent fragments received at which modulation.
For Gen II OFDM only and forward."
::={whispSmStatus 86}
fragmentsReceived1XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 1x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path."
::={whispSmStatus 87}
fragmentsReceived2XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 2x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path."
::={whispSmStatus 88}
fragmentsReceived3XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 3x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path."
::={whispSmStatus 89}
fragmentsReceived4XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 4x modulation.
For GenII OFDM only and forward.
For MIMO this is the vertical path."
::={whispSmStatus 90}
linkQualityData1XVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for QPSK modulation (1X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path."
::={whispSmStatus 91}
linkQualityData2XVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 16-QAM modulation (2X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path."
::={whispSmStatus 92}
linkQualityData3XVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 64-QAM modulation (3X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path."
::={whispSmStatus 93}
linkQualityData4XVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 256-QAM modulation (4X).
For Gen II OFDM radios and forward only.
For MIMO this is the vertical path."
::={whispSmStatus 94}
signalToNoiseRatioSMVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimated signal to noise ratio based on the last received data.
For GenII OFDM only and forward.
For MIMO this is the vertical antenna.
Will return zero if Signal to Noise Ratio Calculation is disabled."
::={whispSmStatus 95}
rfStatTxSuppressionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RF Scheduler Stats DFS TX Suppression Count"
::={whispSmStatus 96}
bridgecbUplinkCreditRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sustained uplink data rate."
::={whispSmStatus 97}
bridgecbUplinkCreditLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink Burst Allocation."
::={whispSmStatus 98}
bridgecbDownlinkCreditRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sustained uplink data rate."
::={whispSmStatus 99}
bridgecbDownlinkCreditLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink Burst Allocation."
::={whispSmStatus 100}
mimoQpskBerDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QPSK BER statistics.
MIMO platforms only."
::={whispSmStatus 101}
mimo16QamBerDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"16-QAM BER statistics
MIMO platforms only.
Engineering use only."
::={whispSmStatus 102}
mimo64QamBerDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"64-QAM BER statistics
MIMO platforms only.
Engineering use only."
::={whispSmStatus 103}
mimo256QamBerDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"256-QAM BER statistics
MIMO platforms only.
Engineering use only."
::={whispSmStatus 104}
mimoBerRcvModulationType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive modulation type.
MIMO platforms only."
::={whispSmStatus 105}
signalToNoiseRatioSMHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimated signal to noise ratio based on the last received data for horizontal antenna.
MIMO radios only.
Will return zero if Signal to Noise Ratio Calculation is disabled.
When operating in MIMO-A will return 0."
::={whispSmStatus 106}
maxRadioDbmDeprecated OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated
and kept for backwards compatibility."
::={whispSmStatus 107}
signalStrengthRatio OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
power received by the horizontal antenna input (dB).
MIMO radios only."
::={whispSmStatus 108}
fragmentsReceived1XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 1x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 109}
fragmentsReceived2XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 2x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 110}
fragmentsReceived3XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 3x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 111}
fragmentsReceived4XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 4x modulation.
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 112}
linkQualityData1XHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for QPSK modulation (1X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 113}
linkQualityData2XHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 16-QAM modulation (2X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 114}
linkQualityData3XHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 64-QAM modulation (3X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 115}
linkQualityData4XHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Link Quality for the data VC for 256-QAM modulation (4X).
For MIMO radios only.
For MIMO this is the horizontal path.
Fragments received in MIMO-A will only be counted on vertical."
::={whispSmStatus 116}
radioDbmHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive power level of the horizontal antenna in dBm.
MIMO radios only."
::={whispSmStatus 117}
radioDbmVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive power level of the vertical antenna in dBm.
MIMO radios only."
::={whispSmStatus 118}
bridgecbDownlinkMaxBurstBitRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum burst downlink rate."
::={whispSmStatus 119}
bridgecbUplinkMaxBurstBitRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum burst uplink Rate."
::={whispSmStatus 120}
currentCyclicPrefix OBJECT-TYPE
SYNTAX INTEGER {
one-quarter(0),
one-eighth(1),
one-sixteenth(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Current Cyclic Prefix of the AP/BHM when in session."
::={whispSmStatus 121}
currentBandwidth OBJECT-TYPE
SYNTAX INTEGER {
bandwidth5mhz(1),
bandwidth7MHz(2),
bandwidth10mhz(3),
bandwidth15mhz(4),
bandwidth20mhz(5),
bandwidth30mhz(6),
bandwidth40MHz(7)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Current Bandwidth of the AP/BHM when in session."
::={whispSmStatus 122}
berPwrRxFPGAPathA OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BER power level on FPGA Rx Path A of SM. Engineering Use Only."
::={whispSmStatus 123}
berPwrRxFPGAPathB OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BER power level on FPGA Rx Path B of SM. Engineering Use Only."
::={whispSmStatus 124}
rawBERPwrRxPathA OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only."
::={whispSmStatus 125}
rawBERPwrRxPathB OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only."
::={whispSmStatus 126}
radioModeStatus OBJECT-TYPE
SYNTAX INTEGER {
undefined(0),
pmp430(1),
pmp450Interoperability(2)}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current radio mode that SM is operating in.
PMP 430 SMs only.
As of 14.2, the 430 SM only supports PMP 450
interoperability mode, so this will only return
pmp450Interoperability."
::={whispSmStatus 127}
adaptRateLowPri OBJECT-TYPE
SYNTAX INTEGER {
noSession(0),
rate1X(1),
rate2X(2),
rete3X(3),
rate4X(4),
rate6X(6),
rate8X(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmitting rate of the low priority VC.
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MIMO
6 : 6X 64-QAM MIMO
8 : 8X 256-QAM MIMO"
::={whispSmStatus 128}
adaptRateHighPri OBJECT-TYPE
SYNTAX INTEGER {
noHighPriorityChannel(-1),
noSession(0),
rate1X(1),
rate2X(2),
rete3X(3),
rate4X(4),
rate6X(6),
rate8X(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmitting rate of the high priority VC.
-1 : High Priority Channel not configured
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MIMO
6 : 6X 64-QAM MIMO
8 : 8X 256-QAM MIMO"
::={whispSmStatus 129}
bitErrorsQSPKpathA OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at QPSK path A.
Valid MIMO platforms only."
::={whispSmStatus 130}
bitErrorsQSPKpathB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at QPSK path B.
Valid MIMO platforms only."
::={whispSmStatus 131}
bitErrors16QAMpathA OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 16-QAM path A.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 132}
bitErrors16QAMpathB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 16-QAM path B.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 133}
bitErrors64QAMpathA OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 64-QAM path A.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 134}
bitErrors64QAMpathB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 64-QAM path B.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 135}
bitErrors256QAMpathA OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 256-QAM path A.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 136}
bitErrors256QAMpathB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors received from BER packet at 256-QAM path B.
Valid MIMO platforms only.
Engineering use only."
::={whispSmStatus 137}
bitsReceivedPerPathModulation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit received from BER.
To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID.
To get combined BER add errors and divide by this multiplied by each path and modulation.
i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2)
Valid MIMO platforms only."
::={whispSmStatus 138}
beaconsPercentReceived OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current percentage of beacons that the SM/BHS successfully receiving."
::={whispSmStatus 139}
mapsPercentReceived OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PMP 450 only.
The current percentage of scheduling maps that the SM/BHS successfully receiving."
::={whispSmStatus 140}
natTslTableEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Entries in NAT Translation Table."
::={whispSmStatus 141}
maxReceivePower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum receive power level for this session.
MIMO radios only."
::={whispSmStatus 142}
beaconsPercentMinReceived OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
::={whispSmStatus 143}
beaconsPercentMaxReceived OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
::={whispSmStatus 144}
beaconsPercentReceivedSnapshot OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes."
::={whispSmStatus 145}
smSectorID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Sector ID of the Registered AP/BHM.
A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID."
::={whispSmStatus 146}
scanCycleCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth."
::={whispSmStatus 147}
bridgeCbErrStatBridgeDropCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet drop count for hosts with MAC address not in bridge table"
::={whispSmStatus 148}
dhcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of DHCP server hosts."
::= {whispSmStatus 19}
dhcpServerEntry OBJECT-TYPE
SYNTAX DhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of DHCP server hosts."
INDEX {hostIp}
::= {dhcpServerTable 1}
DhcpServerEntry ::= SEQUENCE{
hostIp IpAddress,
hostMacAddress PhysAddress,
hostLease TimeTicks
}
hostIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP server IP address."
::={dhcpServerEntry 1}
hostMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Private host MAC address."
::={dhcpServerEntry 2}
hostLease OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lease time assigned by DHCP server host."
::={dhcpServerEntry 3}
whispSmConfigGroup OBJECT-GROUP
OBJECTS {
rfScanListBandFilter,
rfScanList,
powerUpMode,
lanIpSm,
lanMaskSm,
defaultGwSm,
networkAccess,
authKeySm,
enable8023link,
authKeyOption,
timingPulseGated,
naptPrivateIP,
naptPrivateSubnetMask,
naptPublicIP,
naptPublicSubnetMask,
naptPublicGatewayIP,
naptRFPublicIP,
naptRFPublicSubnetMask,
naptRFPublicGateway,
naptEnable,
arpCacheTimeout,
tcpGarbageCollectTmout,
udpGarbageCollectTmout,
natTslTableSize,
dhcpClientEnable,
dhcpServerEnable,
dhcpServerLeaseTime,
dhcpIPStart,
dnsAutomatic,
prefferedDNSIP,
alternateDNSIP,
natDNSProxyEnable,
spectrumAnalysisDisplay,
dmzIP,
dmzEnable,
dhcpNumIPsToLease,
pppoeFilter,
smbFilter,
snmpFilter,
userP1Filter,
userP2Filter,
userP3Filter,
allOtherIpFilter,
allIpv4Filter,
upLinkBCastFilter,
arpFilter,
allOthersFilter,
userDefinedPort1,
port1TCPFilter,
port1UDPFilter,
userDefinedPort2,
port2TCPFilter,
port2UDPFilter,
userDefinedPort3,
port3TCPFilter,
port3UDPFilter,
bootpcFilter,
bootpsFilter,
ip4MultFilter,
ingressVID,
ingressVIDPriority,
ingressVIDPriorityMode,
providerVIDPriority,
providerVIDPriorityMode,
lowPriorityUplinkCIR,
lowPriorityDownlinkCIR,
hiPriorityChannel,
hiPriorityUplinkCIR,
hiPriorityDownlinkCIR,
smRateAdapt,
upLnkMaxBurstDataRate,
upLnkDataRate,
upLnkLimit,
dwnLnkMaxBurstDataRate,
cyclicPrefixScan,
bandwidthScan,
apSelection,
radioBandscanConfig,
forcepoweradjust,
clearBerrResults,
berrautoupdateflag,
testSMBER,
dwnLnkDataRate,
dwnLnkLimit,
dfsConfig,
ethAccessFilterEnable,
ipAccessFilterEnable,
allowedIPAccess1,
allowedIPAccess2,
allowedIPAccess3,
allowedIPAccessNMLength1,
allowedIPAccessNMLength2,
allowedIPAccessNMLength3,
rfDhcpState,
bCastMIR,
bhsReReg,
smLEDModeFlag,
ethAccessEnable,
pppoeEnable,
pppoeAuthenticationType,
pppoeAccessConcentrator,
pppoeServiceName,
pppoeUserName,
pppoePassword,
pppoeTCPMSSClampEnable,
pppoeMTUOverrideEnable,
pppoeMTUOverrideValue,
pppoeTimerType,
pppoeTimeoutPeriod,
timedSpectrumAnalysisDuration,
spectrumAnalysisScanBandwidth,
spectrumAnalysisOnBoot,
spectrumAnalysisAction,
pppoeConnectOD,
pppoeDisconnectOD,
smAntennaType,
natConnectionType,
wanPingReplyEnable,
packetFilterDirection,
colorCode2,
colorCodepriority2,
colorCode3,
colorCodepriority3,
colorCode4,
colorCodepriority4,
colorCode5,
colorCodepriority5,
colorCode6,
colorCodepriority6,
colorCode7,
colorCodepriority7,
colorCode8,
colorCodepriority8,
colorCode9,
colorCodepriority9,
colorCode10,
colorCodepriority10,
additionalColorCode,
additionalColorCodePriority,
deleteAdditionalColorCode,
bridgeTableSize,
bridgeTableRestrict,
berDeModSelect,
multicastVCRcvRate,
syslogServerApPreferred,
syslogMinLevelApPreferred,
syslogSMXmitSetting,
syslogSMXmitControl,
bCastMIRUnits,
naptRemoteManage,
maxTxPowerEnable,
maxTxPower,
txPowerControl,
eapPeerAAAServerCommonName,
pmp430ApRegistrationOptions,
switchRadioModeAndReboot}
STATUS current
DESCRIPTION
"Canopy Subscriber Module configuration group."
::= {whispSmGroups 1}
whispSmStatusGroup OBJECT-GROUP
OBJECTS {
natTslTableEntries,
sessionStatus,
rssi,
jitter,
airDelay,
radioSlicingSm,
radioTxGainSm,
calibrationStatus,
radioDbm,
registeredToAp,
dhcpCip,
dhcpSip,
dhcpClientLease,
dhcpCSMask,
dhcpDfltRterIP,
dhcpcdns1,
dhcpcdns2,
dhcpcdns3,
dhcpDomName,
adaptRate,
adaptRateLowPri,
adaptRateHighPri,
bitErrorsQSPKpathA,
bitErrorsQSPKpathB,
bitErrors16QAMpathA,
bitErrors16QAMpathB,
bitErrors64QAMpathA,
bitErrors64QAMpathB,
bitErrors256QAMpathA,
bitErrors256QAMpathB,
bitsReceivedPerPathModulation,
radioDbmInt,
dfsStatus,
radioTxPwr,
activeRegion,
snmpBerLevel,
nbBitsRcvd,
nbPriBitsErr,
nbSndBitsErr,
primaryBER,
secondaryBER,
totalBER,
minRSSI,
maxRSSI,
minJitter,
maxJitter,
smSessionTimer,
pppoeSessionStatus,
pppoeSessionID,
pppoeIPCPAddress,
pppoeMTUOverrideEn,
pppoeMTUValue,
pppoeTimerTypeValue,
pppoeTimeoutValue,
pppoeDNSServer1,
pppoeDNSServer2,
pppoeControlBytesSent,
pppoeControlBytesReceived,
pppoeDataBytesSent,
pppoeDataBytesReceived,
pppoeEnabledStatus,
pppoeTCPMSSClampEnableStatus,
pppoeACNameStatus,
pppoeSvcNameStatus,
pppoeSessUptime,
primaryBERDisplay,
secondaryBERDisplay,
totalBERDisplay,
mimoQpskBerDisplay,
mimo16QamBerDisplay,
mimo64QamBerDisplay,
mimo256QamBerDisplay,
mimoBerRcvModulationType,
minRadioDbm,
maxRadioDbm,
maxRadioDbmDeprecated,
pppoeSessIdleTime,
radioDbmAvg,
zoltarFPGAFreqOffset,
zoltarSWFreqOffset,
airDelayns,
smSectorID,
scanCycleCount,
currentColorCode,
currentColorCodePri,
currentChanFreq,
linkQualityBeacon,
currentCyclicPrefix,
currentBandwidth,
berPwrRxFPGAPathA,
berPwrRxFPGAPathB,
rawBERPwrRxPathA,
rawBERPwrRxPathB,
linkQualityData1XVertical,
linkQualityData2XVertical,
linkQualityData3XVertical,
linkQualityData4XVertical,
linkQualityData1XHorizontal,
linkQualityData2XHorizontal,
linkQualityData3XHorizontal,
linkQualityData4XHorizontal,
signalToNoiseRatioSMVertical,
signalToNoiseRatioSMHorizontal,
signalStrengthRatio,
radioDbmHorizontal,
radioDbmVertical,
rfStatTxSuppressionCount,
receiveFragmentsModulationPercentage,
fragmentsReceived1XVertical,
fragmentsReceived2XVertical,
fragmentsReceived3XVertical,
fragmentsReceived4XVertical,
fragmentsReceived1XHorizontal,
fragmentsReceived2XHorizontal,
fragmentsReceived3XHorizontal,
fragmentsReceived4XHorizontal,
beaconsPercentReceived,
mapsPercentReceived,
beaconsPercentMinReceived,
beaconsPercentMaxReceived,
beaconsPercentReceivedSnapshot,
maxReceivePower,
bridgecbUplinkCreditRate,
bridgecbUplinkCreditLimit,
bridgecbDownlinkCreditRate,
bridgecbDownlinkCreditLimit,
bridgecbDownlinkMaxBurstBitRate,
bridgecbUplinkMaxBurstBitRate,
bridgeCbErrStatBridgeDropCount,
radioModeStatus}
STATUS current
DESCRIPTION
"Canopy Subscriber Module status group."
::= {whispSmGroups 2}
whispSmNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
enterSpectrumAnalysis,
availableSpectrumAnalysis,
whispRadarDetected,
whispRadarEnd,
smNatWanDHCPClientEvent,
smNatRFPubDHCPClientEvent}
STATUS current
DESCRIPTION
"WHiSP SMs notification group."
::= {whispSmGroups 3}
whispMappingTableGroup OBJECT-GROUP
OBJECTS {
tableIndex,
protocol,
port,
localIp}
STATUS current
DESCRIPTION
"Canopy SM NAT port mapping Table group."
::= {whispSmGroups 4}
-- DFS events
whispRadarDetected NOTIFICATION-TYPE
OBJECTS {
dfsStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Radar detected transmit stopped."
::={whispSmDfsEvent 1}
whispRadarEnd NOTIFICATION-TYPE
OBJECTS {
dfsStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Radar ended back to normal transmit."
::={whispSmDfsEvent 2}
-- Spectrum Analysis Events
enterSpectrumAnalysis NOTIFICATION-TYPE
OBJECTS {
whispBoxEsn}
STATUS current
DESCRIPTION
"Entering spectrum analysis.
physAddress - MAC address of the SM"
::={whispSmSpAnEvent 1}
-- Spectrum Analysis Events
availableSpectrumAnalysis NOTIFICATION-TYPE
OBJECTS {
whispBoxEsn}
STATUS current
DESCRIPTION
"Spectrum analysis is complete, SM is re-registered with AP and results are available.
physAddress - MAC address of the SM"
::={whispSmSpAnEvent 2}
-- SM NAT WAN DHCP Client Event
smNatWanDHCPClientEvent NOTIFICATION-TYPE
OBJECTS {
dhcpCip,
whispBoxEsn}
STATUS current
DESCRIPTION
"NAT WAN DHCP Client has received a new address via DHCP."
::={whispSmDHCPClientEvent 1}
-- SM NAT RF Public DHCP Client Event
smNatRFPubDHCPClientEvent NOTIFICATION-TYPE
OBJECTS {
dhcpRfPublicIp,
whispBoxEsn}
STATUS current
DESCRIPTION
"NAT RF Public DHCP Client has received a new address via DHCP."
::={whispSmDHCPClientEvent 2}
clearLinkStats OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to a nonzero value will clear the link stats."
::={whispSmControls 1}
rescan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to a nonzero value will start the rescan.
Warning: If currently connected, this will cause the SM/BHS to drop session"
::={whispSmControls 2}
apEvalControl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to 0 will clear the AP Evaluation Data."
::={whispSmControls 3}
whispMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NAT port mapping information table."
::= {whispSm 5}
whispMappingEntry OBJECT-TYPE
SYNTAX WhispMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mapping table entry."
INDEX {tableIndex}
::= {whispMappingTable 1}
WhispMappingEntry ::= SEQUENCE{
tableIndex INTEGER,
protocol INTEGER,
port INTEGER,
localIp IpAddress
}
tableIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User information table index."
::={whispMappingEntry 1}
protocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP."
::={whispMappingEntry 2}
port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer."
::={whispMappingEntry 3}
localIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP of local host to which the incoming packet mapped to an application should be forwarded."
::={whispMappingEntry 4}
whispSmTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispSmTranslationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Translation Table."
::= {whispSm 6}
whispSmTranslationTableEntry OBJECT-TYPE
SYNTAX WhispSmTranslationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Translation Table Entry."
INDEX {whispTranslationTableIndex}
::= {whispSmTranslationTable 1}
WhispSmTranslationTableEntry ::= SEQUENCE{
whispTranslationTableIndex INTEGER,
whispTranslationTableMacAddr MacAddress,
whispTranslationTableIpAddr IpAddress,
whispTranslationTableAge Counter32
}
whispTranslationTableIndex OBJECT-TYPE
SYNTAX INTEGER (1..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into translation table."
::={whispSmTranslationTableEntry 1}
whispTranslationTableMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC Address of the registered entity."
::={whispSmTranslationTableEntry 2}
whispTranslationTableIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip Address of the registered entity."
::={whispSmTranslationTableEntry 3}
whispTranslationTableAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Age of the registered entity."
::={whispSmTranslationTableEntry 4}
whispSmColorCodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispSmColorCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional color code Table."
::= {whispSm 9}
whispSmColorCodeEntry OBJECT-TYPE
SYNTAX WhispSmColorCodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional Color code Entry."
INDEX {entryColorCode}
::= {whispSmColorCodeTable 1}
WhispSmColorCodeEntry ::= SEQUENCE{
entryColorCode INTEGER,
entryColorCodePriority INTEGER
}
entryColorCode OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"color code."
::={whispSmColorCodeEntry 1}
entryColorCodePriority OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"color code priority."
::={whispSmColorCodeEntry 2}
whispSmAPEvalTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispSmAPEvalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP Eval List."
::= {whispSm 10}
whispSmAPEvalEntry OBJECT-TYPE
SYNTAX WhispSmAPEvalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Evaluation of AP and BHM Entries"
INDEX {evalIndex}
::= {whispSmAPEvalTable 1}
WhispSmAPEvalEntry ::= SEQUENCE{
evalIndex INTEGER,
evalFrequency INTEGER,
evalChannelBandwidth INTEGER,
evalCyclicPrefix INTEGER,
evalESN PhysAddress,
evalRegion DisplayString,
evalBeaconReceivePowerCombined INTEGER,
evalBeaconReceivePowerH INTEGER,
evalBeaconReceivePowerV INTEGER,
evalFECEnable INTEGER,
evalType INTEGER,
evalAvail INTEGER,
evalAge INTEGER,
evalLockout INTEGER,
evalRegFail INTEGER,
evalRange INTEGER,
evalMaxRange INTEGER,
evalTxBER INTEGER,
evalEBCast INTEGER,
evalSessionCount INTEGER,
evalNoLuid INTEGER,
evalOutOfRange INTEGER,
evalAuthFail INTEGER,
evalEncryptFail INTEGER,
evalReScanReq INTEGER,
evalLimitReached INTEGER,
evalNoVCs INTEGER,
evalVCReserveFail INTEGER,
evalVCActFail INTEGER,
evalTxPower INTEGER,
evalReceiveTargetLevel INTEGER,
evalColorCode INTEGER,
evalBeaconVersion INTEGER,
evalSectorUserCount INTEGER,
evalSyncSrc INTEGER,
evalNumULSlots INTEGER,
evalNumDLSlots INTEGER,
evalNumULContSlots INTEGER,
evalICC INTEGER,
evalAuthentication INTEGER,
evalSMPPPoE INTEGER,
evalPToPVLAN INTEGER,
evalFramePeriod INTEGER
}
evalIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the radio seen in the scan"
::={whispSmAPEvalEntry 1}
evalFrequency OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Frequency in KHz"
::={whispSmAPEvalEntry 2}
evalChannelBandwidth OBJECT-TYPE
SYNTAX INTEGER {
bandwidth3Point5MHz(0),
bandwidth5MHz(1),
bandwidth7MHz(2),
bandwidth10MHz(3),
bandwidth15MHz(4),
bandwidth20MHz(5),
bandwidth30MHz(6),
bandwidth40MHz(7)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel Bandwidth"
::={whispSmAPEvalEntry 3}
evalCyclicPrefix OBJECT-TYPE
SYNTAX INTEGER {
one-quarter(0),
one-eighth(1),
one-sixteenth(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cyclic Prefix value, for OFDM Radios only."
::={whispSmAPEvalEntry 4}
evalESN OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio ESN"
::={whispSmAPEvalEntry 5}
evalRegion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Region"
::={whispSmAPEvalEntry 6}
evalBeaconReceivePowerCombined OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Receive Power Combined in dBm(rounded to nearest integer)"
::={whispSmAPEvalEntry 7}
evalBeaconReceivePowerH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Receive Power in dBm(rounded to nearest integer) for Path H(MIMO Radios only)"
::={whispSmAPEvalEntry 8}
evalBeaconReceivePowerV OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Receive Power in dBm(rounded to nearest integer) for Path V(MIMO Radios only)"
::={whispSmAPEvalEntry 9}
evalFECEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Error Correction Enabled Status.
Note, this is always enabled on 450 and forward."
::={whispSmAPEvalEntry 10}
evalType OBJECT-TYPE
SYNTAX INTEGER {
multipoint(0),
point-to-point(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio Type (Point-to-Point or Multipoint)"
::={whispSmAPEvalEntry 11}
evalAvail OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns True if seen on the previous SM's scan"
::={whispSmAPEvalEntry 12}
evalAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of minutes since index was last seen"
::={whispSmAPEvalEntry 13}
evalLockout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of minutes radio is currently locked out"
::={whispSmAPEvalEntry 14}
evalRegFail OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Registration Fail Count"
::={whispSmAPEvalEntry 15}
evalRange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range in feet"
::={whispSmAPEvalEntry 16}
evalMaxRange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max Range is in miles"
::={whispSmAPEvalEntry 17}
evalTxBER OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio is transmitting Bit Error Rate symbol or not
Note: This is always enabled on 450 and forward"
::={whispSmAPEvalEntry 18}
evalEBCast OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcast Encryption status"
::={whispSmAPEvalEntry 19}
evalSessionCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Session Count"
::={whispSmAPEvalEntry 20}
evalNoLuid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to No Luid"
::={whispSmAPEvalEntry 21}
evalOutOfRange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to out of range"
::={whispSmAPEvalEntry 22}
evalAuthFail OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to authentication failure"
::={whispSmAPEvalEntry 23}
evalEncryptFail OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to encrypt fail"
::={whispSmAPEvalEntry 24}
evalReScanReq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rescan request count"
::={whispSmAPEvalEntry 25}
evalLimitReached OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times failed when trying to register with an limited AP maxed out"
::={whispSmAPEvalEntry 26}
evalNoVCs OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to No VCs"
::={whispSmAPEvalEntry 27}
evalVCReserveFail OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to VC reserve fail"
::={whispSmAPEvalEntry 28}
evalVCActFail OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the registration request has been rejected due to VC activate fail"
::={whispSmAPEvalEntry 29}
evalTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Power in dBm"
::={whispSmAPEvalEntry 30}
evalReceiveTargetLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive Target Level(in dBm)(PMP only)"
::={whispSmAPEvalEntry 31}
evalColorCode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Color Code"
::={whispSmAPEvalEntry 32}
evalBeaconVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Beacon Version"
::={whispSmAPEvalEntry 33}
evalSectorUserCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sector User Count(AP only)"
::={whispSmAPEvalEntry 34}
evalSyncSrc OBJECT-TYPE
SYNTAX INTEGER {
generate-sync(0),
gps-sync(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sync Source(PMP only)"
::={whispSmAPEvalEntry 35}
evalNumULSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of uplink slots"
::={whispSmAPEvalEntry 36}
evalNumDLSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of downlink slots"
::={whispSmAPEvalEntry 37}
evalNumULContSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of uplink contention slots(PMP only)"
::={whispSmAPEvalEntry 38}
evalICC OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instalaton Color Code(PMP only)"
::={whispSmAPEvalEntry 39}
evalAuthentication OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Setting(PMP only)"
::={whispSmAPEvalEntry 40}
evalSMPPPoE OBJECT-TYPE
SYNTAX INTEGER {
not-supported(0),
suported(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SM PPPoE status(PMP only)"
::={whispSmAPEvalEntry 41}
evalPToPVLAN OBJECT-TYPE
SYNTAX INTEGER {
not-supported(0),
suported(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PToP VLAN"
::={whispSmAPEvalEntry 42}
evalFramePeriod OBJECT-TYPE
SYNTAX INTEGER {
twoPointFiveMs(0),
fiveMs(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame Period"
::={whispSmAPEvalEntry 43}
END
Reference in New Issue Copy Permalink