4157 lines
112 KiB
Plaintext
4157 lines
112 KiB
Plaintext
|
|
--
|
|
-- whisp-sm-mib.mib
|
|
-- GENERATED FROM ui_db.xml
|
|
--
|
|
-- *****************************************************************************************
|
|
-- Copyright 2005 - 2015 (c), Cambium Networks
|
|
-- Cambium Networks Confidential Proprietary
|
|
-- *****************************************************************************************
|
|
--
|
|
-- Canopy SM and Backhaul Timing Slave MIB definitions.
|
|
--
|
|
-- *****************************************************************************************
|
|
|
|
WHISP-SM-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, TimeTicks, IpAddress, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, PhysAddress, MacAddress
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
WhispLUID, WhispMACAddress
|
|
FROM WHISP-TCV2-MIB
|
|
whispModules, whispBox, whispAps, whispSm
|
|
FROM WHISP-GLOBAL-REG-MIB
|
|
dhcpRfPublicIp, whispBoxEsn
|
|
FROM WHISP-BOX-MIBV2-MIB
|
|
;
|
|
|
|
whispSmMibModule MODULE-IDENTITY
|
|
LAST-UPDATED "200304150000Z"
|
|
ORGANIZATION "Cambium Networks"
|
|
CONTACT-INFO
|
|
"Cambium Networks Support
|
|
email: support@cambiumnetworks.com"
|
|
DESCRIPTION
|
|
"This module contains MIB definitions for Subscriber Modem."
|
|
::= {whispModules 13}
|
|
|
|
-- -------------------------------------------------------------------------
|
|
-- Top Level Registrations
|
|
|
|
whispSmConfig OBJECT IDENTIFIER ::= {whispSm 1}
|
|
whispSmSecurity OBJECT IDENTIFIER ::= {whispSm 7}
|
|
whispSmStatus OBJECT IDENTIFIER ::= {whispSm 2}
|
|
whispSmGroups OBJECT IDENTIFIER ::= {whispSm 3}
|
|
whispSmEvent OBJECT IDENTIFIER ::= {whispSm 4}
|
|
whispSmDfsEvent OBJECT IDENTIFIER ::= {whispSmEvent 1}
|
|
whispSmSpAnEvent OBJECT IDENTIFIER ::= {whispSmEvent 2}
|
|
whispSmDHCPClientEvent OBJECT IDENTIFIER ::= {whispSmEvent 3}
|
|
whispSmControls OBJECT IDENTIFIER ::= {whispSm 8}
|
|
|
|
-- -------------------------------------------------------------------------
|
|
|
|
|
|
-- Subscriber Modem and Backhaul timing slave configuration
|
|
|
|
rfScanList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF scan list string.
|
|
The frequencies vary by product and region.
|
|
If the frequency list is too long an SNMP error will be returned. If this occurs please refer to
|
|
OID rfScanListTable, which will allow user to enter the full range of available frequencies.
|
|
String length is limited to SNMP buffer size, so while all frequencies may be set, not all may be retrieved.
|
|
Special settings:
|
|
0: none.
|
|
all: All frequencies in the band(s) supported by the radio will be selected.
|
|
all49, all51, all52: Available only for 450i 5 GHz wideband radio.
|
|
all54, all57: Available only for 450 and 450i 5 GHz radios.
|
|
When doing a set, separate values with comma with no white space between values."
|
|
::={whispSmConfig 1}
|
|
|
|
powerUpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
operational(0),
|
|
aim(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM Power Up Mode With No 802.3 Link.
|
|
0 - Power up in Operational mode.
|
|
1 - Power up in Aim mode."
|
|
::={whispSmConfig 2}
|
|
|
|
lanIpSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LAN IP."
|
|
::={whispSmConfig 3}
|
|
|
|
lanMaskSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LAN subnet mask."
|
|
::={whispSmConfig 4}
|
|
|
|
defaultGwSm OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default gateway."
|
|
::={whispSmConfig 5}
|
|
|
|
networkAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
localIP(0),
|
|
publicIP(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network accessibility. Public or local IP.
|
|
For multipoint only."
|
|
::={whispSmConfig 6}
|
|
|
|
authKeySm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication key. It should be equal or less than 32
|
|
characters long."
|
|
::={whispSmConfig 7}
|
|
|
|
enable8023link OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"To enable or disable 802.3 link. For SMs only. Deprecated: Use enable8023linkBox instead."
|
|
::={whispSmConfig 8}
|
|
|
|
authKeyOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
useDefault(0),
|
|
useKeySet(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This option is for SMs only. Backhaul timing slave always
|
|
uses the set key.
|
|
0 - Use default key.
|
|
1 - Use set key."
|
|
::={whispSmConfig 9}
|
|
|
|
timingPulseGated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 - Disable (Always propagate the frame timing pulse).
|
|
1 - Enable (If SM out of sync then dont propagate the frame timing pulse)."
|
|
::={whispSmConfig 10}
|
|
|
|
-- NAPT configuration
|
|
|
|
naptPrivateIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAPT private IP address. Only the first three bytes can be
|
|
changed when NAPT is enabled."
|
|
::={whispSmConfig 11}
|
|
|
|
naptPrivateSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAPT private subnet mask. Only the last byte can be
|
|
changed when NAPT is enabled. The address will always be:
|
|
255.255.255.x."
|
|
::={whispSmConfig 12}
|
|
|
|
naptPublicIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of NAPT Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 13}
|
|
|
|
naptPublicSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask for NAPT Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 14}
|
|
|
|
naptPublicGatewayIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of NAPT Public Interface Gateway. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 15}
|
|
|
|
naptRFPublicIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of RF Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 16}
|
|
|
|
naptRFPublicSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Subnet mask of RF Public Interface. The variable is available
|
|
only when NAPT is enabled."
|
|
::={whispSmConfig 17}
|
|
|
|
naptRFPublicGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP Address of RF Public Interface Gateway. The variable is
|
|
available only when NAPT is enabled."
|
|
::={whispSmConfig 18}
|
|
|
|
naptEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable NAPT. For multipoint only.
|
|
1=Enable NAPT, 0=Disable NAPT."
|
|
::={whispSmConfig 19}
|
|
|
|
arpCacheTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ARP cache time out in unit of minutes. For multipoint only.
|
|
Range from 1-30."
|
|
::={whispSmConfig 20}
|
|
|
|
tcpGarbageCollectTmout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of minutes for TCP garbage collection. For multipoint only.
|
|
Range 4-1440."
|
|
::={whispSmConfig 21}
|
|
|
|
udpGarbageCollectTmout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of minutes for UDP garbage collection. For multipoint only.
|
|
Range 1-1440."
|
|
::={whispSmConfig 22}
|
|
|
|
-- DHCP configuration
|
|
|
|
dhcpClientEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To enable or disable DHCP client. For multipoint SM's
|
|
with NAPT enabled."
|
|
::={whispSmConfig 23}
|
|
|
|
dhcpServerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable DHCP server. For multipoint SM's
|
|
with NAPT enabled."
|
|
::={whispSmConfig 24}
|
|
|
|
dhcpServerLeaseTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of days for DHCP server lease time. For multipoint
|
|
SM's with NAPT enabled. Range from 1-30."
|
|
::={whispSmConfig 25}
|
|
|
|
dhcpIPStart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last byte will be set for the starting IP that
|
|
our DHCP server gives away. The first 3 bytes of the
|
|
starting IP are the same as those of NAPT private IP"
|
|
::={whispSmConfig 26}
|
|
|
|
dnsAutomatic OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manually(0),
|
|
automatically(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To have DHCP Server obtain DNS information automatically or manually."
|
|
::={whispSmConfig 27}
|
|
|
|
prefferedDNSIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The preferred DNS IP when we are configured for static DNS
|
|
(Not used when configured for automatic DNS)."
|
|
::={whispSmConfig 28}
|
|
|
|
alternateDNSIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alternate DNS IP when we are configured for static DNS
|
|
(Not used when configured for automatic DNS)."
|
|
::={whispSmConfig 29}
|
|
|
|
dmzIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only the last byte of DMZ Host IP will be set.
|
|
The first 3 bytes of DMZ IP are the same as those of
|
|
NAPT private IP."
|
|
::={whispSmConfig 30}
|
|
|
|
dmzEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable DMZ host functionality."
|
|
::={whispSmConfig 31}
|
|
|
|
dhcpNumIPsToLease OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of IP addresses that our DHCP server can give away."
|
|
::={whispSmConfig 32}
|
|
|
|
pppoeFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set PPPoE packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 33}
|
|
|
|
smbFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set SMB packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 34}
|
|
|
|
snmpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set SNMP packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 35}
|
|
|
|
userP1Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 36}
|
|
|
|
userP2Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 37}
|
|
|
|
userP3Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 packet filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 38}
|
|
|
|
allOtherIpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all other IPv4 packet filter when NAT
|
|
is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 39}
|
|
|
|
upLinkBCastFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This variable is currently obsolete."
|
|
::={whispSmConfig 40}
|
|
|
|
arpFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set ARP packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 41}
|
|
|
|
allOthersFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all other packet filter when NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 42}
|
|
|
|
-- User Defined Port Filtering Configuration
|
|
|
|
userDefinedPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number one user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 43}
|
|
|
|
port1TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 44}
|
|
|
|
port1UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 1 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 45}
|
|
|
|
userDefinedPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number two user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 46}
|
|
|
|
port2TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 47}
|
|
|
|
port2UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 2 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 48}
|
|
|
|
userDefinedPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"An integer value of number three user defined port. Range:0-65535
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 49}
|
|
|
|
port3TCPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 TCP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 50}
|
|
|
|
port3UDPFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set user defined port 3 UDP traffic filter.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 51}
|
|
|
|
bootpcFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set bootp client sourced packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 52}
|
|
|
|
bootpsFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set bootp server sourced packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 53}
|
|
|
|
ip4MultFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set IPv4 MultiCast packets filter when
|
|
NAT is disabled.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 54}
|
|
|
|
ingressVID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Untagged ingress VID."
|
|
::={whispSmConfig 55}
|
|
|
|
-- CIR configuration
|
|
|
|
lowPriorityUplinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low priority uplink CIR."
|
|
::={whispSmConfig 56}
|
|
|
|
lowPriorityDownlinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low priority downlink CIR."
|
|
::={whispSmConfig 57}
|
|
|
|
hiPriorityChannel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable high priority channel."
|
|
::={whispSmConfig 58}
|
|
|
|
hiPriorityUplinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High priority uplink CIR."
|
|
::={whispSmConfig 59}
|
|
|
|
hiPriorityDownlinkCIR OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High priority downlink CIR."
|
|
::={whispSmConfig 60}
|
|
|
|
smRateAdapt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
onex(0),
|
|
onextwox(1),
|
|
onextwoxthreex(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation."
|
|
::={whispSmConfig 61}
|
|
|
|
upLnkDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink bandwidth cap."
|
|
::={whispSmConfig 62}
|
|
|
|
upLnkLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burst uplink bandwidth cap."
|
|
::={whispSmConfig 63}
|
|
|
|
dwnLnkDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained downlink bandwidth cap."
|
|
::={whispSmConfig 64}
|
|
|
|
dwnLnkLimit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Burst downlink bandwidth cap."
|
|
::={whispSmConfig 65}
|
|
|
|
dfsConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
|
|
::={whispSmConfig 66}
|
|
|
|
ethAccessFilterEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To enable or disable Ethernet Port access filtering to SM Management Functions.
|
|
(0) - Ethernet access to SM Management allowed.
|
|
(1) - Ethernet access to SM Management blocked."
|
|
::={whispSmConfig 67}
|
|
|
|
ipAccessFilterEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable IP access filtering to Management functions.
|
|
(0) - IP access will be allowed from all addresses.
|
|
(1) - IP access will be controlled using allowedIPAccess1-3 entries."
|
|
::={whispSmConfig 68}
|
|
|
|
allowedIPAccess1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 69}
|
|
|
|
allowedIPAccess2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 70}
|
|
|
|
allowedIPAccess3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow access to SM Management from this IP.
|
|
0 is default setting to allow from all IPs."
|
|
::={whispSmConfig 71}
|
|
|
|
rfDhcpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable RF Interface DHCP feature."
|
|
::={whispSmConfig 72}
|
|
|
|
-- Broadcast MIR Feature.
|
|
|
|
bCastMIR OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable.
|
|
Units are as per bCastMIRUnits variable. Set the units first and then set this value."
|
|
::={whispSmConfig 73}
|
|
|
|
bhsReReg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh."
|
|
::={whispSmConfig 74}
|
|
|
|
smLEDModeFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
legacy(0),
|
|
revised(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)"
|
|
::={whispSmConfig 75}
|
|
|
|
ethAccessEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Ethernet Port access to SM Management Functions.
|
|
(1) - Ethernet access to SM Management allowed.
|
|
(0) - Ethernet access to SM Management blocked."
|
|
::={whispSmConfig 76}
|
|
|
|
pppoeEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP."
|
|
::={whispSmConfig 77}
|
|
|
|
pppoeAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
chap-pap(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Authentication Type to either None or CHAP/pap"
|
|
::={whispSmConfig 78}
|
|
|
|
pppoeAccessConcentrator OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters"
|
|
::={whispSmConfig 79}
|
|
|
|
pppoeServiceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Service Name. Less than or equal to 32 characters"
|
|
::={whispSmConfig 80}
|
|
|
|
pppoeUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Username. Less than or equal to 32 characters"
|
|
::={whispSmConfig 81}
|
|
|
|
pppoePassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Password. Less than or equal to 32 characters"
|
|
::={whispSmConfig 82}
|
|
|
|
pppoeTCPMSSClampEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets.
|
|
This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are
|
|
using PMTUD reliably, this should not be needed."
|
|
::={whispSmConfig 83}
|
|
|
|
pppoeMTUOverrideEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
|
|
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
|
|
the smaller MTU will be used."
|
|
::={whispSmConfig 84}
|
|
|
|
pppoeMTUOverrideValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1492)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the
|
|
PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU,
|
|
the smaller MTU will be used. Max MTU of a PPPoE link is 1492."
|
|
::={whispSmConfig 85}
|
|
|
|
pppoeTimerType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
keepAlive(1),
|
|
idleTimeout(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and
|
|
automatically redialed if the link is down. Also could be an Idle Timeout where the link will
|
|
be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers
|
|
are in seconds while Idle Timeout timers are in minutes."
|
|
::={whispSmConfig 86}
|
|
|
|
pppoeTimeoutPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
|
|
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes.
|
|
Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout."
|
|
::={whispSmConfig 87}
|
|
|
|
timedSpectrumAnalysisDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig.
|
|
Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds."
|
|
::={whispSmConfig 88}
|
|
|
|
spectrumAnalysisOnBoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Spectrum Analysis on boot up for one scan through the band.
|
|
(0) - Disabled
|
|
(1) - Enabled"
|
|
::={whispSmConfig 89}
|
|
|
|
spectrumAnalysisAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stopSpectrumAnalysis(0),
|
|
startTimedSpectrumAnalysis(1),
|
|
startContinuousSpectrumAnalysis(2),
|
|
idleNoSpectrumAnalysis(3),
|
|
idleCompleteSpectrumAnalysis(4),
|
|
inProgressTimedSpectrumAnalysis(5),
|
|
inProgressContinuousSpectrumAnalysis(6)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig.
|
|
Start or stop timed or continuous Spectrum Analysis and also give status.
|
|
(0) - Stop Spectrum Analysis
|
|
(1) - Start Timed Spectrum Analysis
|
|
(2) - Start Continuous Spectrum Analysis
|
|
(3) - Idle, no Spectrum Analysis results.
|
|
(4) - Idle, Spectrum Analysis results available.
|
|
(5) - Timed or Remote Spectrum Analysis in progress.
|
|
(6) - Continuous Spectrum Analysis in progress.
|
|
|
|
Note: Continuous mode has a max of 24 hours."
|
|
::={whispSmConfig 90}
|
|
|
|
pppoeConnectOD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
connectOnDemand(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Force a manual PPPoE connection attempt."
|
|
::={whispSmConfig 91}
|
|
|
|
pppoeDisconnectOD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disconnectOnDemand(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Force a manual PPPoE disconnection."
|
|
::={whispSmConfig 92}
|
|
|
|
smAntennaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
integrated(0),
|
|
external(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Deprecated. See whispBoxStatus.antType for antenna type information."
|
|
::={whispSmConfig 93}
|
|
|
|
-- SM NAT Connection Type
|
|
|
|
natConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
staticIP(0),
|
|
dhcp(1),
|
|
pppoe(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE."
|
|
::={whispSmConfig 94}
|
|
|
|
-- SM WAN (NAT and/or PPPoE) Ping Reply Enable
|
|
|
|
wanPingReplyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces."
|
|
::={whispSmConfig 95}
|
|
|
|
packetFilterDirection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
upstream(1),
|
|
downstream(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To packet filter direction when NAT is disabled. Upstream is default.
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 96}
|
|
|
|
colorCode2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 97}
|
|
|
|
colorCodepriority2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the second color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 98}
|
|
|
|
colorCode3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 99}
|
|
|
|
colorCodepriority3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the third color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 100}
|
|
|
|
colorCode4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 101}
|
|
|
|
colorCodepriority4 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the fourth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 102}
|
|
|
|
colorCode5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 103}
|
|
|
|
colorCodepriority5 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the fifth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 104}
|
|
|
|
colorCode6 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 105}
|
|
|
|
colorCodepriority6 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the sixth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 106}
|
|
|
|
colorCode7 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 107}
|
|
|
|
colorCodepriority7 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the seventh color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 108}
|
|
|
|
colorCode8 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 109}
|
|
|
|
colorCodepriority8 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the eighth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 110}
|
|
|
|
colorCode9 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 111}
|
|
|
|
colorCodepriority9 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the ninth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 112}
|
|
|
|
colorCode10 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig."
|
|
::={whispSmConfig 113}
|
|
|
|
colorCodepriority10 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3),
|
|
disable(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Priority setting for the tenth color code. The variable is deprecated.
|
|
See additionalColorCodePriority in whispSmConfig."
|
|
::={whispSmConfig 114}
|
|
|
|
natDNSProxyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically.
|
|
If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases."
|
|
::={whispSmConfig 115}
|
|
|
|
allIpv4Filter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
filterOff(0),
|
|
filterOn(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"To set all IPv4 packet filter when NAT
|
|
is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp,
|
|
IPv4 Mcast, User Defined Ports, and All Other IPv4).
|
|
Obsolete - Use corresponding OID in whipsBoxConfig MIB."
|
|
::={whispSmConfig 116}
|
|
|
|
spectrumAnalysisDisplay OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
averaging(0),
|
|
instantaneous(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The display for Spectrum Analyzer:
|
|
(0) - Averaging over entire period
|
|
(1) - Instantaneous showing the last reading"
|
|
::={whispSmConfig 117}
|
|
|
|
syslogSMXmitSetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
obtain-from-AP(0),
|
|
enable(1),
|
|
disable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2)."
|
|
::={whispSmConfig 118}
|
|
|
|
syslogServerApPreferred OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
use-local(0),
|
|
use-AP-preferred(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uses Syslog server configuration from AP/BHM if enabled and available,
|
|
otherwise uses local configuration."
|
|
::={whispSmConfig 119}
|
|
|
|
syslogMinLevelApPreferred OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
use-local(0),
|
|
use-AP-preferred(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uses Syslog minimum transmit level configuration from AP/BHM if available,
|
|
otherwise uses local configuration."
|
|
::={whispSmConfig 120}
|
|
|
|
syslogSMXmitControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
obtain-from-AP-default-disabled(0),
|
|
obtain-from-AP-default-enabled(1),
|
|
disable(2),
|
|
enable(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state."
|
|
::={whispSmConfig 121}
|
|
|
|
eapPeerAAAServerCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name"
|
|
::={whispSmConfig 126}
|
|
|
|
rfScanListBandFilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
band5400(8),
|
|
band5700(9)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This element is obsolete."
|
|
::={whispSmConfig 127}
|
|
|
|
upLnkMaxBurstDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kilobits/sec"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst uplink rate."
|
|
::={whispSmConfig 128}
|
|
|
|
dwnLnkMaxBurstDataRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "Kilobits/sec"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst downlink rate."
|
|
::={whispSmConfig 129}
|
|
|
|
cyclicPrefixScan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cyclic Prefix value for frequency scanning used by MIMO SMs only.
|
|
When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16"
|
|
::={whispSmConfig 130}
|
|
|
|
bandwidthScan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bandwidth values for frequency scanning used by MIMO SMs only.
|
|
When setting use a comma delimited list of bandwidths.
|
|
For example: 10, 20"
|
|
::={whispSmConfig 131}
|
|
|
|
apSelection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
powerLevel(1),
|
|
optimizeForThroughput(0)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration.
|
|
(0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput.
|
|
(1) - Select the AP with the best receive power level.
|
|
Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc."
|
|
::={whispSmConfig 132}
|
|
|
|
radioBandscanConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
instant(0),
|
|
delayed(1),
|
|
apply(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to determine when frequency, cyclic prefix and bandwidth settings take effect for
|
|
band scanning MIMO SMs.
|
|
0 - Instant
|
|
1 - Delayed
|
|
2 - Apply changes"
|
|
::={whispSmConfig 133}
|
|
|
|
forcepoweradjust OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will force a multipoint SM to initiate an asynchronous power adjust sequence.
|
|
This is done automatically every 2 minutes."
|
|
::={whispSmConfig 134}
|
|
|
|
clearBerrResults OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will clear the BER results."
|
|
::={whispSmConfig 135}
|
|
|
|
berrautoupdateflag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled"
|
|
::={whispSmConfig 136}
|
|
|
|
testSMBER OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 - Disable (Return the SM to a normal operation state).
|
|
1 - Enable (Set SM into a BER test state)."
|
|
::={whispSmConfig 137}
|
|
|
|
allowedIPAccessNMLength1 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 138}
|
|
|
|
allowedIPAccessNMLength2 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 139}
|
|
|
|
allowedIPAccessNMLength3 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
|
|
::={whispSmConfig 140}
|
|
|
|
naptRemoteManage OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable-standalone(1),
|
|
enable-wan(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable or disable Remote Management. For multipoint only.
|
|
0=Disable Remote Management,
|
|
1=Enable - Standalone Config,
|
|
2=Enable - Use WAN Interface."
|
|
::={whispSmConfig 141}
|
|
|
|
spectrumAnalysisScanBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidth5MHz(0),
|
|
bandwidth10MHz(1),
|
|
bandwidth20MHz(2),
|
|
bandwidth7MHz(3),
|
|
bandwidth15MHz(4),
|
|
bandwidth30MHz(5)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450."
|
|
::={whispSmConfig 142}
|
|
|
|
berDeModSelect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qpsk(0),
|
|
qam-16(1),
|
|
qam-64(2),
|
|
qam-256(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
|
|
::={whispSmConfig 143}
|
|
|
|
multicastVCRcvRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast VC Receive Rate"
|
|
::={whispSmConfig 144}
|
|
|
|
pmp430ApRegistrationOptions OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pmp430(1),
|
|
pmp450(2),
|
|
both(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated. The 430 SM only supports PMP 450
|
|
interoperability mode."
|
|
::={whispSmConfig 145}
|
|
|
|
switchRadioModeAndReboot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
finishedReboot(0),
|
|
switchRadioModeAndReboot(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"As of 14.2, the 430 SM no longer supports multiple
|
|
radio modes. It only support 450 interoperability
|
|
mode."
|
|
::={whispSmConfig 146}
|
|
|
|
natTslTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1024..8192)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT Translation Table Size.
|
|
Range 1024-8192."
|
|
::={whispSmConfig 147}
|
|
|
|
ingressVIDPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ingress VID VLAN Priority."
|
|
::={whispSmConfig 148}
|
|
|
|
ingressVIDPriorityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
promote-IP-priority(0),
|
|
define-priority(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ingress VID VLAN Priority Mode."
|
|
::={whispSmConfig 149}
|
|
|
|
providerVIDPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provider VID VLAN Priority."
|
|
::={whispSmConfig 150}
|
|
|
|
providerVIDPriorityMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
promote-IP-priority(0),
|
|
define-priority(1),
|
|
copy-inner-tag-priority(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provider VID VLAN Priority Mode."
|
|
::={whispSmConfig 151}
|
|
|
|
additionalColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add an additional color code. Setting additionalColorCode and
|
|
additionalColorCodePriority adds an entry."
|
|
::={whispSmConfig 152}
|
|
|
|
additionalColorCodePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Add an additional color code priority. Setting additionalColorCode and
|
|
additionalColorCodePriority adds an entry."
|
|
::={whispSmConfig 153}
|
|
|
|
deleteAdditionalColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delete an additional color code."
|
|
::={whispSmConfig 154}
|
|
|
|
bCastMIRUnits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
kbps(0),
|
|
pps(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR"
|
|
::={whispSmConfig 155}
|
|
|
|
txPowerControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable Automatic control of SM TX power.
|
|
Engineering use only."
|
|
::={whispSmConfig 157}
|
|
|
|
bridgeTableSize OBJECT-TYPE
|
|
SYNTAX INTEGER (4..4096)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge Table Size : 4 -- 4096."
|
|
::={whispSmConfig 158}
|
|
|
|
bridgeTableRestrict OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Restrict forwarding packets from hosts for which MAC address is not in the bridge table."
|
|
::={whispSmConfig 159}
|
|
|
|
maxTxPowerEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable Max Tx Power configuration.
|
|
This is used with OID maxTxPower to set the max transmit power.
|
|
This might be required in certain regions and frequency bands.
|
|
See User Guide for more information.
|
|
Enabling this will not allow a radio to transmit above its EIRP limit.
|
|
The AP's Transmit Power Control may still adjust the Tx power down.
|
|
SM only."
|
|
::={whispSmConfig 160}
|
|
|
|
maxTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (-30..27)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This OID is controled by OID maxTxPowerEnable.
|
|
This might be required in certain regions and frequency bands.
|
|
See user guide for more information.
|
|
Setting this will not allow a radio to transmit above its EIRP limit.
|
|
The AP's Transmit Power Control may still adjust the Tx power down.
|
|
SM only."
|
|
::={whispSmConfig 161}
|
|
|
|
rfScanListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RfScanListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of configured scanning frequencies on the SM or BHS."
|
|
::= {whispSmConfig 156}
|
|
|
|
rfScanListEntry OBJECT-TYPE
|
|
SYNTAX RfScanListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of configured scanning frequencies on the SM or BHS."
|
|
INDEX {rfScanListFrequency}
|
|
::= {rfScanListTable 1}
|
|
|
|
RfScanListEntry ::= SEQUENCE{
|
|
rfScanListFrequency INTEGER
|
|
}
|
|
|
|
rfScanListFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF scan list.
|
|
The frequencies vary by product and region."
|
|
::={rfScanListEntry 1}
|
|
|
|
numAuthCerts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"can have a max value of 2"
|
|
::={whispSmSecurity 2}
|
|
|
|
authenticationEnforce OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
aaa(1),
|
|
presharedkey(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enforce SM to register with specifed Auth Enabled AP"
|
|
::={whispSmSecurity 3}
|
|
|
|
-- PEAP is not supported for MPC860 platorm
|
|
|
|
phase1 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
eapttls(0),
|
|
eapMSChapV2(1),
|
|
eappeap(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the outer method for EAP Authentication.
|
|
Note: PEAP is not supported for MPC860 platform."
|
|
::={whispSmSecurity 4}
|
|
|
|
phase2 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pap(0),
|
|
chap(1),
|
|
mschapv2(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the outer method for EAP Authentication"
|
|
::={whispSmSecurity 5}
|
|
|
|
authOuterId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..253))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Username"
|
|
::={whispSmSecurity 6}
|
|
|
|
authPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer password"
|
|
::={whispSmSecurity 7}
|
|
|
|
authUsername OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Identity"
|
|
::={whispSmSecurity 8}
|
|
|
|
useRealm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the use of realm option."
|
|
::={whispSmSecurity 9}
|
|
|
|
realm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP Peer Realm"
|
|
::={whispSmSecurity 10}
|
|
|
|
certTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of CA Certificates on SM."
|
|
::= {whispSmSecurity 1}
|
|
|
|
certEntry OBJECT-TYPE
|
|
SYNTAX CertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of Certifcates."
|
|
INDEX {certIndex}
|
|
::= {certTable 1}
|
|
|
|
CertEntry ::= SEQUENCE{
|
|
certIndex INTEGER,
|
|
cert INTEGER,
|
|
action INTEGER,
|
|
certificateDN DisplayString
|
|
}
|
|
|
|
certIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User information table index."
|
|
::={certEntry 1}
|
|
|
|
cert OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Inactive 1: Active"
|
|
::={certEntry 2}
|
|
|
|
action OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noop(0),
|
|
delete(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: No Operation 1: Delete Certificate"
|
|
::={certEntry 3}
|
|
|
|
certificateDN OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Distinguished Name of Certificate 2"
|
|
::={certEntry 4}
|
|
|
|
-- Subscriber Modem status page
|
|
|
|
sessionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM registered or not."
|
|
::={whispSmStatus 1}
|
|
|
|
rssi OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio signal strength index. FSK only."
|
|
::={whispSmStatus 2}
|
|
|
|
jitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A measure of multipath interference. Applicable to FSK radios only."
|
|
::={whispSmStatus 3}
|
|
|
|
airDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Round trip delay in bits."
|
|
::={whispSmStatus 4}
|
|
|
|
radioSlicingSm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This variable is deprecated."
|
|
::={whispSmStatus 5}
|
|
|
|
radioTxGainSm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio transmission gain setting. Applicable to FSK radios only."
|
|
::={whispSmStatus 6}
|
|
|
|
calibrationStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Varible deprecated. Please use calibrationStatusBox."
|
|
::={whispSmStatus 7}
|
|
|
|
radioDbm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx Power level.
|
|
For MIMO this is the combined power of the horizontal and vertical paths."
|
|
::={whispSmStatus 8}
|
|
|
|
registeredToAp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP MAC address that the SM registered to."
|
|
::={whispSmStatus 9}
|
|
|
|
-- DHCP client status:
|
|
|
|
dhcpCip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Assigned IP address to DHCP client."
|
|
::={whispSmStatus 10}
|
|
|
|
dhcpSip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public DHCP server IP."
|
|
::={whispSmStatus 11}
|
|
|
|
dhcpClientLease OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP client lease time."
|
|
::={whispSmStatus 12}
|
|
|
|
dhcpCSMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public DHCP server subnet mask."
|
|
::={whispSmStatus 13}
|
|
|
|
dhcpDfltRterIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public default router IP address."
|
|
::={whispSmStatus 14}
|
|
|
|
dhcpcdns1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Primary public domain name server."
|
|
::={whispSmStatus 15}
|
|
|
|
dhcpcdns2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary public domain name server."
|
|
::={whispSmStatus 16}
|
|
|
|
dhcpcdns3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Third public domain name server."
|
|
::={whispSmStatus 17}
|
|
|
|
dhcpDomName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Public domain name server."
|
|
::={whispSmStatus 18}
|
|
|
|
adaptRate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VC adapt rate."
|
|
::={whispSmStatus 20}
|
|
|
|
radioDbmInt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio power level(integer).
|
|
For MIMO radios this is the combined power of the horiztontal and vertical paths."
|
|
::={whispSmStatus 21}
|
|
|
|
dfsStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic frequency shifting status. For DFS Radio only."
|
|
::={whispSmStatus 22}
|
|
|
|
radioTxPwr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx Power level. Valid for FSK and OFDM SMs."
|
|
::={whispSmStatus 23}
|
|
|
|
activeRegion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active region of the radio."
|
|
::={whispSmStatus 24}
|
|
|
|
snmpBerLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
twoLevelOrMimoQPSK(2),
|
|
fourLevelOrMimo16QAM(4),
|
|
mimo64QAM(6),
|
|
mimo256QAM(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER level.
|
|
For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM
|
|
For non PMP 450: 2=2 level BER, 4=4 level BER."
|
|
::={whispSmStatus 25}
|
|
|
|
nbBitsRcvd OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of BER bits received (non MIMO platforms only)."
|
|
::={whispSmStatus 26}
|
|
|
|
nbPriBitsErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Primary bit errors (non MIMO platforms only)."
|
|
::={whispSmStatus 27}
|
|
|
|
nbSndBitsErr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of secondary bit errors (non MIMO platforms only)."
|
|
::={whispSmStatus 28}
|
|
|
|
primaryBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate."
|
|
::={whispSmStatus 29}
|
|
|
|
secondaryBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate."
|
|
::={whispSmStatus 30}
|
|
|
|
totalBER OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate."
|
|
::={whispSmStatus 31}
|
|
|
|
minRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Min. RSSI. Applicable to FSK radios only."
|
|
::={whispSmStatus 32}
|
|
|
|
maxRSSI OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Max. RSSI. Applicable to FSK radios only."
|
|
::={whispSmStatus 33}
|
|
|
|
minJitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Min. Jitter. Applicable to FSK radios only."
|
|
::={whispSmStatus 34}
|
|
|
|
maxJitter OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..15)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Max. Jitter. Applicable to FSK radios only."
|
|
::={whispSmStatus 35}
|
|
|
|
smSessionTimer OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM current session timer."
|
|
::={whispSmStatus 36}
|
|
|
|
pppoeSessionStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Session Status"
|
|
::={whispSmStatus 37}
|
|
|
|
pppoeSessionID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Session ID"
|
|
::={whispSmStatus 38}
|
|
|
|
pppoeIPCPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE IPCP IP Address"
|
|
::={whispSmStatus 39}
|
|
|
|
pppoeMTUOverrideEn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE MTU Override Setting"
|
|
::={whispSmStatus 40}
|
|
|
|
pppoeMTUValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE MTU Value"
|
|
::={whispSmStatus 41}
|
|
|
|
pppoeTimerTypeValue OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
keepAlive(1),
|
|
idleTimeout(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer."
|
|
::={whispSmStatus 42}
|
|
|
|
pppoeTimeoutValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then
|
|
the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes."
|
|
::={whispSmStatus 43}
|
|
|
|
pppoeDNSServer1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE DNS Server 1"
|
|
::={whispSmStatus 44}
|
|
|
|
pppoeDNSServer2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE DNS Server 2"
|
|
::={whispSmStatus 45}
|
|
|
|
pppoeControlBytesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Control Bytes Sent"
|
|
::={whispSmStatus 46}
|
|
|
|
pppoeControlBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Control Bytes Received"
|
|
::={whispSmStatus 47}
|
|
|
|
pppoeDataBytesSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Data Bytes Sent"
|
|
::={whispSmStatus 48}
|
|
|
|
pppoeDataBytesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Data Bytes Received"
|
|
::={whispSmStatus 49}
|
|
|
|
pppoeEnabledStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE Enabled"
|
|
::={whispSmStatus 50}
|
|
|
|
pppoeTCPMSSClampEnableStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PPPoE TCP MSS Clamping Enable"
|
|
::={whispSmStatus 51}
|
|
|
|
pppoeACNameStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Access Concentrator In Use"
|
|
::={whispSmStatus 52}
|
|
|
|
pppoeSvcNameStatus OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current PPPoE Service Name In Use"
|
|
::={whispSmStatus 53}
|
|
|
|
pppoeSessUptime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uptime of current PPPoE Session in ticks"
|
|
::={whispSmStatus 54}
|
|
|
|
primaryBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Primary Bit Error Rate.
|
|
Non MIMO platforms only."
|
|
::={whispSmStatus 55}
|
|
|
|
secondaryBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Secondary Bit Error Rate.
|
|
FSK platforms only."
|
|
::={whispSmStatus 56}
|
|
|
|
totalBERDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Total Bit Error Rate.
|
|
For MIMO this is combined both paths."
|
|
::={whispSmStatus 57}
|
|
|
|
minRadioDbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum receive power of beacon in dBm.
|
|
For MIMO radios, this is only available in the vertical path."
|
|
::={whispSmStatus 58}
|
|
|
|
maxRadioDbm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum receive power in dBm (rounded to nearest integer)."
|
|
::={whispSmStatus 59}
|
|
|
|
pppoeSessIdleTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Idle Time of current PPPoE Session in ticks"
|
|
::={whispSmStatus 60}
|
|
|
|
radioDbmAvg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Average Receive Power of the AP's beacon in dBm.
|
|
OFDM Radios only.
|
|
For MIMO this is only the verical path, as the beacon is not transmitted on horizontal."
|
|
::={whispSmStatus 61}
|
|
|
|
zoltarFPGAFreqOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FPGA peek of 70001088"
|
|
::={whispSmStatus 62}
|
|
|
|
zoltarSWFreqOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FPGA peek of 7000108C"
|
|
::={whispSmStatus 63}
|
|
|
|
airDelayns OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Round trip delay in nanoseconds."
|
|
::={whispSmStatus 64}
|
|
|
|
currentColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered."
|
|
::={whispSmStatus 65}
|
|
|
|
currentColorCodePri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current priority of the Registered color code"
|
|
::={whispSmStatus 66}
|
|
|
|
currentChanFreq OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Channel Frequency of the AP/BHM when in session."
|
|
::={whispSmStatus 67}
|
|
|
|
linkQualityBeacon OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering only.
|
|
Link Quality for incoming beacons.
|
|
For Gen II OFDM radios and forward.
|
|
For PMP 450 and forward this is vertical path."
|
|
::={whispSmStatus 68}
|
|
|
|
dhcpServerPktXmt OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets transmitted by SM DHCP Server"
|
|
::={whispSmStatus 72}
|
|
|
|
dhcpServerPktRcv OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets received by SM DHCP Server"
|
|
::={whispSmStatus 73}
|
|
|
|
dhcpServerPktToss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of packets tossed by SM DHCP Server"
|
|
::={whispSmStatus 74}
|
|
|
|
receiveFragmentsModulationPercentage OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
The percentage of recent fragments received at which modulation.
|
|
For Gen II OFDM only and forward."
|
|
::={whispSmStatus 86}
|
|
|
|
fragmentsReceived1XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 1x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 87}
|
|
|
|
fragmentsReceived2XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 2x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 88}
|
|
|
|
fragmentsReceived3XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 3x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 89}
|
|
|
|
fragmentsReceived4XVertical OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 4x modulation.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 90}
|
|
|
|
linkQualityData1XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for QPSK modulation (1X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 91}
|
|
|
|
linkQualityData2XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 16-QAM modulation (2X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 92}
|
|
|
|
linkQualityData3XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 64-QAM modulation (3X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 93}
|
|
|
|
linkQualityData4XVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 256-QAM modulation (4X).
|
|
For Gen II OFDM radios and forward only.
|
|
For MIMO this is the vertical path."
|
|
::={whispSmStatus 94}
|
|
|
|
signalToNoiseRatioSMVertical OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimated signal to noise ratio based on the last received data.
|
|
For GenII OFDM only and forward.
|
|
For MIMO this is the vertical antenna.
|
|
Will return zero if Signal to Noise Ratio Calculation is disabled."
|
|
::={whispSmStatus 95}
|
|
|
|
rfStatTxSuppressionCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF Scheduler Stats DFS TX Suppression Count"
|
|
::={whispSmStatus 96}
|
|
|
|
bridgecbUplinkCreditRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink data rate."
|
|
::={whispSmStatus 97}
|
|
|
|
bridgecbUplinkCreditLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uplink Burst Allocation."
|
|
::={whispSmStatus 98}
|
|
|
|
bridgecbDownlinkCreditRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sustained uplink data rate."
|
|
::={whispSmStatus 99}
|
|
|
|
bridgecbDownlinkCreditLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uplink Burst Allocation."
|
|
::={whispSmStatus 100}
|
|
|
|
mimoQpskBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QPSK BER statistics.
|
|
MIMO platforms only."
|
|
::={whispSmStatus 101}
|
|
|
|
mimo16QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"16-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 102}
|
|
|
|
mimo64QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"64-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 103}
|
|
|
|
mimo256QamBerDisplay OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"256-QAM BER statistics
|
|
MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 104}
|
|
|
|
mimoBerRcvModulationType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive modulation type.
|
|
MIMO platforms only."
|
|
::={whispSmStatus 105}
|
|
|
|
signalToNoiseRatioSMHorizontal OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An estimated signal to noise ratio based on the last received data for horizontal antenna.
|
|
MIMO radios only.
|
|
Will return zero if Signal to Noise Ratio Calculation is disabled.
|
|
When operating in MIMO-A will return 0."
|
|
::={whispSmStatus 106}
|
|
|
|
maxRadioDbmDeprecated OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated
|
|
and kept for backwards compatibility."
|
|
::={whispSmStatus 107}
|
|
|
|
signalStrengthRatio OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
|
|
power received by the horizontal antenna input (dB).
|
|
MIMO radios only."
|
|
::={whispSmStatus 108}
|
|
|
|
fragmentsReceived1XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 1x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 109}
|
|
|
|
fragmentsReceived2XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 2x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 110}
|
|
|
|
fragmentsReceived3XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 3x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 111}
|
|
|
|
fragmentsReceived4XHorizontal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Number of fragments received in 4x modulation.
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 112}
|
|
|
|
linkQualityData1XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for QPSK modulation (1X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 113}
|
|
|
|
linkQualityData2XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 16-QAM modulation (2X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 114}
|
|
|
|
linkQualityData3XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 64-QAM modulation (3X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 115}
|
|
|
|
linkQualityData4XHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Engineering use only.
|
|
Link Quality for the data VC for 256-QAM modulation (4X).
|
|
For MIMO radios only.
|
|
For MIMO this is the horizontal path.
|
|
Fragments received in MIMO-A will only be counted on vertical."
|
|
::={whispSmStatus 116}
|
|
|
|
radioDbmHorizontal OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive power level of the horizontal antenna in dBm.
|
|
MIMO radios only."
|
|
::={whispSmStatus 117}
|
|
|
|
radioDbmVertical OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive power level of the vertical antenna in dBm.
|
|
MIMO radios only."
|
|
::={whispSmStatus 118}
|
|
|
|
bridgecbDownlinkMaxBurstBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst downlink rate."
|
|
::={whispSmStatus 119}
|
|
|
|
bridgecbUplinkMaxBurstBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst uplink Rate."
|
|
::={whispSmStatus 120}
|
|
|
|
currentCyclicPrefix OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-quarter(0),
|
|
one-eighth(1),
|
|
one-sixteenth(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Cyclic Prefix of the AP/BHM when in session."
|
|
::={whispSmStatus 121}
|
|
|
|
currentBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidth5mhz(1),
|
|
bandwidth7MHz(2),
|
|
bandwidth10mhz(3),
|
|
bandwidth15mhz(4),
|
|
bandwidth20mhz(5),
|
|
bandwidth30mhz(6),
|
|
bandwidth40MHz(7)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Current Bandwidth of the AP/BHM when in session."
|
|
::={whispSmStatus 122}
|
|
|
|
berPwrRxFPGAPathA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER power level on FPGA Rx Path A of SM. Engineering Use Only."
|
|
::={whispSmStatus 123}
|
|
|
|
berPwrRxFPGAPathB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"BER power level on FPGA Rx Path B of SM. Engineering Use Only."
|
|
::={whispSmStatus 124}
|
|
|
|
rawBERPwrRxPathA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only."
|
|
::={whispSmStatus 125}
|
|
|
|
rawBERPwrRxPathB OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only."
|
|
::={whispSmStatus 126}
|
|
|
|
radioModeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
pmp430(1),
|
|
pmp450Interoperability(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The current radio mode that SM is operating in.
|
|
PMP 430 SMs only.
|
|
As of 14.2, the 430 SM only supports PMP 450
|
|
interoperability mode, so this will only return
|
|
pmp450Interoperability."
|
|
::={whispSmStatus 127}
|
|
|
|
adaptRateLowPri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noSession(0),
|
|
rate1X(1),
|
|
rate2X(2),
|
|
rete3X(3),
|
|
rate4X(4),
|
|
rate6X(6),
|
|
rate8X(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transmitting rate of the low priority VC.
|
|
0 : SM is not in session
|
|
1 : 1X QPSK SISO
|
|
2 : 2X 16-QAM SISO or QPSK MIMO
|
|
3 : 3X 64-QAM SISO
|
|
4 : 4X 256-QAM SISO or 16-QAM MIMO
|
|
6 : 6X 64-QAM MIMO
|
|
8 : 8X 256-QAM MIMO"
|
|
::={whispSmStatus 128}
|
|
|
|
adaptRateHighPri OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noHighPriorityChannel(-1),
|
|
noSession(0),
|
|
rate1X(1),
|
|
rate2X(2),
|
|
rete3X(3),
|
|
rate4X(4),
|
|
rate6X(6),
|
|
rate8X(8)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current transmitting rate of the high priority VC.
|
|
-1 : High Priority Channel not configured
|
|
0 : SM is not in session
|
|
1 : 1X QPSK SISO
|
|
2 : 2X 16-QAM SISO or QPSK MIMO
|
|
3 : 3X 64-QAM SISO
|
|
4 : 4X 256-QAM SISO or 16-QAM MIMO
|
|
6 : 6X 64-QAM MIMO
|
|
8 : 8X 256-QAM MIMO"
|
|
::={whispSmStatus 129}
|
|
|
|
bitErrorsQSPKpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at QPSK path A.
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 130}
|
|
|
|
bitErrorsQSPKpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at QPSK path B.
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 131}
|
|
|
|
bitErrors16QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 16-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 132}
|
|
|
|
bitErrors16QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 16-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 133}
|
|
|
|
bitErrors64QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 64-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 134}
|
|
|
|
bitErrors64QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 64-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 135}
|
|
|
|
bitErrors256QAMpathA OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 256-QAM path A.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 136}
|
|
|
|
bitErrors256QAMpathB OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit errors received from BER packet at 256-QAM path B.
|
|
Valid MIMO platforms only.
|
|
Engineering use only."
|
|
::={whispSmStatus 137}
|
|
|
|
bitsReceivedPerPathModulation OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of bit received from BER.
|
|
To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID.
|
|
To get combined BER add errors and divide by this multiplied by each path and modulation.
|
|
i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2)
|
|
Valid MIMO platforms only."
|
|
::={whispSmStatus 138}
|
|
|
|
beaconsPercentReceived OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current percentage of beacons that the SM/BHS successfully receiving."
|
|
::={whispSmStatus 139}
|
|
|
|
mapsPercentReceived OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PMP 450 only.
|
|
The current percentage of scheduling maps that the SM/BHS successfully receiving."
|
|
::={whispSmStatus 140}
|
|
|
|
natTslTableEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of Entries in NAT Translation Table."
|
|
::={whispSmStatus 141}
|
|
|
|
maxReceivePower OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum receive power level for this session.
|
|
MIMO radios only."
|
|
::={whispSmStatus 142}
|
|
|
|
beaconsPercentMinReceived OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
|
|
::={whispSmStatus 143}
|
|
|
|
beaconsPercentMaxReceived OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes."
|
|
::={whispSmStatus 144}
|
|
|
|
beaconsPercentReceivedSnapshot OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes."
|
|
::={whispSmStatus 145}
|
|
|
|
smSectorID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current Sector ID of the Registered AP/BHM.
|
|
A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID."
|
|
::={whispSmStatus 146}
|
|
|
|
scanCycleCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth."
|
|
::={whispSmStatus 147}
|
|
|
|
bridgeCbErrStatBridgeDropCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet drop count for hosts with MAC address not in bridge table"
|
|
::={whispSmStatus 148}
|
|
|
|
dhcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of DHCP server hosts."
|
|
::= {whispSmStatus 19}
|
|
|
|
dhcpServerEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of DHCP server hosts."
|
|
INDEX {hostIp}
|
|
::= {dhcpServerTable 1}
|
|
|
|
DhcpServerEntry ::= SEQUENCE{
|
|
hostIp IpAddress,
|
|
hostMacAddress PhysAddress,
|
|
hostLease TimeTicks
|
|
}
|
|
|
|
hostIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP server IP address."
|
|
::={dhcpServerEntry 1}
|
|
|
|
hostMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Private host MAC address."
|
|
::={dhcpServerEntry 2}
|
|
|
|
hostLease OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lease time assigned by DHCP server host."
|
|
::={dhcpServerEntry 3}
|
|
|
|
whispSmConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
rfScanListBandFilter,
|
|
rfScanList,
|
|
powerUpMode,
|
|
lanIpSm,
|
|
lanMaskSm,
|
|
defaultGwSm,
|
|
networkAccess,
|
|
authKeySm,
|
|
enable8023link,
|
|
authKeyOption,
|
|
timingPulseGated,
|
|
naptPrivateIP,
|
|
naptPrivateSubnetMask,
|
|
naptPublicIP,
|
|
naptPublicSubnetMask,
|
|
naptPublicGatewayIP,
|
|
naptRFPublicIP,
|
|
naptRFPublicSubnetMask,
|
|
naptRFPublicGateway,
|
|
naptEnable,
|
|
arpCacheTimeout,
|
|
tcpGarbageCollectTmout,
|
|
udpGarbageCollectTmout,
|
|
natTslTableSize,
|
|
dhcpClientEnable,
|
|
dhcpServerEnable,
|
|
dhcpServerLeaseTime,
|
|
dhcpIPStart,
|
|
dnsAutomatic,
|
|
prefferedDNSIP,
|
|
alternateDNSIP,
|
|
natDNSProxyEnable,
|
|
spectrumAnalysisDisplay,
|
|
dmzIP,
|
|
dmzEnable,
|
|
dhcpNumIPsToLease,
|
|
pppoeFilter,
|
|
smbFilter,
|
|
snmpFilter,
|
|
userP1Filter,
|
|
userP2Filter,
|
|
userP3Filter,
|
|
allOtherIpFilter,
|
|
allIpv4Filter,
|
|
upLinkBCastFilter,
|
|
arpFilter,
|
|
allOthersFilter,
|
|
userDefinedPort1,
|
|
port1TCPFilter,
|
|
port1UDPFilter,
|
|
userDefinedPort2,
|
|
port2TCPFilter,
|
|
port2UDPFilter,
|
|
userDefinedPort3,
|
|
port3TCPFilter,
|
|
port3UDPFilter,
|
|
bootpcFilter,
|
|
bootpsFilter,
|
|
ip4MultFilter,
|
|
ingressVID,
|
|
ingressVIDPriority,
|
|
ingressVIDPriorityMode,
|
|
providerVIDPriority,
|
|
providerVIDPriorityMode,
|
|
lowPriorityUplinkCIR,
|
|
lowPriorityDownlinkCIR,
|
|
hiPriorityChannel,
|
|
hiPriorityUplinkCIR,
|
|
hiPriorityDownlinkCIR,
|
|
smRateAdapt,
|
|
upLnkMaxBurstDataRate,
|
|
upLnkDataRate,
|
|
upLnkLimit,
|
|
dwnLnkMaxBurstDataRate,
|
|
cyclicPrefixScan,
|
|
bandwidthScan,
|
|
apSelection,
|
|
radioBandscanConfig,
|
|
forcepoweradjust,
|
|
clearBerrResults,
|
|
berrautoupdateflag,
|
|
testSMBER,
|
|
dwnLnkDataRate,
|
|
dwnLnkLimit,
|
|
dfsConfig,
|
|
ethAccessFilterEnable,
|
|
ipAccessFilterEnable,
|
|
allowedIPAccess1,
|
|
allowedIPAccess2,
|
|
allowedIPAccess3,
|
|
allowedIPAccessNMLength1,
|
|
allowedIPAccessNMLength2,
|
|
allowedIPAccessNMLength3,
|
|
rfDhcpState,
|
|
bCastMIR,
|
|
bhsReReg,
|
|
smLEDModeFlag,
|
|
ethAccessEnable,
|
|
pppoeEnable,
|
|
pppoeAuthenticationType,
|
|
pppoeAccessConcentrator,
|
|
pppoeServiceName,
|
|
pppoeUserName,
|
|
pppoePassword,
|
|
pppoeTCPMSSClampEnable,
|
|
pppoeMTUOverrideEnable,
|
|
pppoeMTUOverrideValue,
|
|
pppoeTimerType,
|
|
pppoeTimeoutPeriod,
|
|
timedSpectrumAnalysisDuration,
|
|
spectrumAnalysisScanBandwidth,
|
|
spectrumAnalysisOnBoot,
|
|
spectrumAnalysisAction,
|
|
pppoeConnectOD,
|
|
pppoeDisconnectOD,
|
|
smAntennaType,
|
|
natConnectionType,
|
|
wanPingReplyEnable,
|
|
packetFilterDirection,
|
|
colorCode2,
|
|
colorCodepriority2,
|
|
colorCode3,
|
|
colorCodepriority3,
|
|
colorCode4,
|
|
colorCodepriority4,
|
|
colorCode5,
|
|
colorCodepriority5,
|
|
colorCode6,
|
|
colorCodepriority6,
|
|
colorCode7,
|
|
colorCodepriority7,
|
|
colorCode8,
|
|
colorCodepriority8,
|
|
colorCode9,
|
|
colorCodepriority9,
|
|
colorCode10,
|
|
colorCodepriority10,
|
|
additionalColorCode,
|
|
additionalColorCodePriority,
|
|
deleteAdditionalColorCode,
|
|
bridgeTableSize,
|
|
bridgeTableRestrict,
|
|
berDeModSelect,
|
|
multicastVCRcvRate,
|
|
syslogServerApPreferred,
|
|
syslogMinLevelApPreferred,
|
|
syslogSMXmitSetting,
|
|
syslogSMXmitControl,
|
|
bCastMIRUnits,
|
|
naptRemoteManage,
|
|
maxTxPowerEnable,
|
|
maxTxPower,
|
|
txPowerControl,
|
|
eapPeerAAAServerCommonName,
|
|
pmp430ApRegistrationOptions,
|
|
switchRadioModeAndReboot}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy Subscriber Module configuration group."
|
|
::= {whispSmGroups 1}
|
|
|
|
whispSmStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
natTslTableEntries,
|
|
sessionStatus,
|
|
rssi,
|
|
jitter,
|
|
airDelay,
|
|
radioSlicingSm,
|
|
radioTxGainSm,
|
|
calibrationStatus,
|
|
radioDbm,
|
|
registeredToAp,
|
|
dhcpCip,
|
|
dhcpSip,
|
|
dhcpClientLease,
|
|
dhcpCSMask,
|
|
dhcpDfltRterIP,
|
|
dhcpcdns1,
|
|
dhcpcdns2,
|
|
dhcpcdns3,
|
|
dhcpDomName,
|
|
adaptRate,
|
|
adaptRateLowPri,
|
|
adaptRateHighPri,
|
|
bitErrorsQSPKpathA,
|
|
bitErrorsQSPKpathB,
|
|
bitErrors16QAMpathA,
|
|
bitErrors16QAMpathB,
|
|
bitErrors64QAMpathA,
|
|
bitErrors64QAMpathB,
|
|
bitErrors256QAMpathA,
|
|
bitErrors256QAMpathB,
|
|
bitsReceivedPerPathModulation,
|
|
radioDbmInt,
|
|
dfsStatus,
|
|
radioTxPwr,
|
|
activeRegion,
|
|
snmpBerLevel,
|
|
nbBitsRcvd,
|
|
nbPriBitsErr,
|
|
nbSndBitsErr,
|
|
primaryBER,
|
|
secondaryBER,
|
|
totalBER,
|
|
minRSSI,
|
|
maxRSSI,
|
|
minJitter,
|
|
maxJitter,
|
|
smSessionTimer,
|
|
pppoeSessionStatus,
|
|
pppoeSessionID,
|
|
pppoeIPCPAddress,
|
|
pppoeMTUOverrideEn,
|
|
pppoeMTUValue,
|
|
pppoeTimerTypeValue,
|
|
pppoeTimeoutValue,
|
|
pppoeDNSServer1,
|
|
pppoeDNSServer2,
|
|
pppoeControlBytesSent,
|
|
pppoeControlBytesReceived,
|
|
pppoeDataBytesSent,
|
|
pppoeDataBytesReceived,
|
|
pppoeEnabledStatus,
|
|
pppoeTCPMSSClampEnableStatus,
|
|
pppoeACNameStatus,
|
|
pppoeSvcNameStatus,
|
|
pppoeSessUptime,
|
|
primaryBERDisplay,
|
|
secondaryBERDisplay,
|
|
totalBERDisplay,
|
|
mimoQpskBerDisplay,
|
|
mimo16QamBerDisplay,
|
|
mimo64QamBerDisplay,
|
|
mimo256QamBerDisplay,
|
|
mimoBerRcvModulationType,
|
|
minRadioDbm,
|
|
maxRadioDbm,
|
|
maxRadioDbmDeprecated,
|
|
pppoeSessIdleTime,
|
|
radioDbmAvg,
|
|
zoltarFPGAFreqOffset,
|
|
zoltarSWFreqOffset,
|
|
airDelayns,
|
|
smSectorID,
|
|
scanCycleCount,
|
|
currentColorCode,
|
|
currentColorCodePri,
|
|
currentChanFreq,
|
|
linkQualityBeacon,
|
|
currentCyclicPrefix,
|
|
currentBandwidth,
|
|
berPwrRxFPGAPathA,
|
|
berPwrRxFPGAPathB,
|
|
rawBERPwrRxPathA,
|
|
rawBERPwrRxPathB,
|
|
linkQualityData1XVertical,
|
|
linkQualityData2XVertical,
|
|
linkQualityData3XVertical,
|
|
linkQualityData4XVertical,
|
|
linkQualityData1XHorizontal,
|
|
linkQualityData2XHorizontal,
|
|
linkQualityData3XHorizontal,
|
|
linkQualityData4XHorizontal,
|
|
signalToNoiseRatioSMVertical,
|
|
signalToNoiseRatioSMHorizontal,
|
|
signalStrengthRatio,
|
|
radioDbmHorizontal,
|
|
radioDbmVertical,
|
|
rfStatTxSuppressionCount,
|
|
receiveFragmentsModulationPercentage,
|
|
fragmentsReceived1XVertical,
|
|
fragmentsReceived2XVertical,
|
|
fragmentsReceived3XVertical,
|
|
fragmentsReceived4XVertical,
|
|
fragmentsReceived1XHorizontal,
|
|
fragmentsReceived2XHorizontal,
|
|
fragmentsReceived3XHorizontal,
|
|
fragmentsReceived4XHorizontal,
|
|
beaconsPercentReceived,
|
|
mapsPercentReceived,
|
|
beaconsPercentMinReceived,
|
|
beaconsPercentMaxReceived,
|
|
beaconsPercentReceivedSnapshot,
|
|
maxReceivePower,
|
|
bridgecbUplinkCreditRate,
|
|
bridgecbUplinkCreditLimit,
|
|
bridgecbDownlinkCreditRate,
|
|
bridgecbDownlinkCreditLimit,
|
|
bridgecbDownlinkMaxBurstBitRate,
|
|
bridgecbUplinkMaxBurstBitRate,
|
|
bridgeCbErrStatBridgeDropCount,
|
|
radioModeStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy Subscriber Module status group."
|
|
::= {whispSmGroups 2}
|
|
|
|
whispSmNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
enterSpectrumAnalysis,
|
|
availableSpectrumAnalysis,
|
|
whispRadarDetected,
|
|
whispRadarEnd,
|
|
smNatWanDHCPClientEvent,
|
|
smNatRFPubDHCPClientEvent}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WHiSP SMs notification group."
|
|
::= {whispSmGroups 3}
|
|
|
|
whispMappingTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tableIndex,
|
|
protocol,
|
|
port,
|
|
localIp}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Canopy SM NAT port mapping Table group."
|
|
::= {whispSmGroups 4}
|
|
|
|
-- DFS events
|
|
|
|
whispRadarDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dfsStatus,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radar detected transmit stopped."
|
|
::={whispSmDfsEvent 1}
|
|
|
|
whispRadarEnd NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dfsStatus,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radar ended back to normal transmit."
|
|
::={whispSmDfsEvent 2}
|
|
|
|
-- Spectrum Analysis Events
|
|
|
|
enterSpectrumAnalysis NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entering spectrum analysis.
|
|
physAddress - MAC address of the SM"
|
|
::={whispSmSpAnEvent 1}
|
|
|
|
-- Spectrum Analysis Events
|
|
|
|
availableSpectrumAnalysis NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spectrum analysis is complete, SM is re-registered with AP and results are available.
|
|
physAddress - MAC address of the SM"
|
|
::={whispSmSpAnEvent 2}
|
|
|
|
-- SM NAT WAN DHCP Client Event
|
|
|
|
smNatWanDHCPClientEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dhcpCip,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT WAN DHCP Client has received a new address via DHCP."
|
|
::={whispSmDHCPClientEvent 1}
|
|
|
|
-- SM NAT RF Public DHCP Client Event
|
|
|
|
smNatRFPubDHCPClientEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
dhcpRfPublicIp,
|
|
whispBoxEsn}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT RF Public DHCP Client has received a new address via DHCP."
|
|
::={whispSmDHCPClientEvent 2}
|
|
|
|
clearLinkStats OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to a nonzero value will clear the link stats."
|
|
::={whispSmControls 1}
|
|
|
|
rescan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to a nonzero value will start the rescan.
|
|
Warning: If currently connected, this will cause the SM/BHS to drop session"
|
|
::={whispSmControls 2}
|
|
|
|
apEvalControl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to 0 will clear the AP Evaluation Data."
|
|
::={whispSmControls 3}
|
|
|
|
whispMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NAT port mapping information table."
|
|
::= {whispSm 5}
|
|
|
|
whispMappingEntry OBJECT-TYPE
|
|
SYNTAX WhispMappingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mapping table entry."
|
|
INDEX {tableIndex}
|
|
::= {whispMappingTable 1}
|
|
|
|
WhispMappingEntry ::= SEQUENCE{
|
|
tableIndex INTEGER,
|
|
protocol INTEGER,
|
|
port INTEGER,
|
|
localIp IpAddress
|
|
}
|
|
|
|
tableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User information table index."
|
|
::={whispMappingEntry 1}
|
|
|
|
protocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP."
|
|
::={whispMappingEntry 2}
|
|
|
|
port OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer."
|
|
::={whispMappingEntry 3}
|
|
|
|
localIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP of local host to which the incoming packet mapped to an application should be forwarded."
|
|
::={whispMappingEntry 4}
|
|
|
|
whispSmTranslationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispSmTranslationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translation Table."
|
|
::= {whispSm 6}
|
|
|
|
whispSmTranslationTableEntry OBJECT-TYPE
|
|
SYNTAX WhispSmTranslationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Translation Table Entry."
|
|
INDEX {whispTranslationTableIndex}
|
|
::= {whispSmTranslationTable 1}
|
|
|
|
WhispSmTranslationTableEntry ::= SEQUENCE{
|
|
whispTranslationTableIndex INTEGER,
|
|
whispTranslationTableMacAddr MacAddress,
|
|
whispTranslationTableIpAddr IpAddress,
|
|
whispTranslationTableAge Counter32
|
|
}
|
|
|
|
whispTranslationTableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index into translation table."
|
|
::={whispSmTranslationTableEntry 1}
|
|
|
|
whispTranslationTableMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC Address of the registered entity."
|
|
::={whispSmTranslationTableEntry 2}
|
|
|
|
whispTranslationTableIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip Address of the registered entity."
|
|
::={whispSmTranslationTableEntry 3}
|
|
|
|
whispTranslationTableAge OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Age of the registered entity."
|
|
::={whispSmTranslationTableEntry 4}
|
|
|
|
whispSmColorCodeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispSmColorCodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional color code Table."
|
|
::= {whispSm 9}
|
|
|
|
whispSmColorCodeEntry OBJECT-TYPE
|
|
SYNTAX WhispSmColorCodeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Additional Color code Entry."
|
|
INDEX {entryColorCode}
|
|
::= {whispSmColorCodeTable 1}
|
|
|
|
WhispSmColorCodeEntry ::= SEQUENCE{
|
|
entryColorCode INTEGER,
|
|
entryColorCodePriority INTEGER
|
|
}
|
|
|
|
entryColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"color code."
|
|
::={whispSmColorCodeEntry 1}
|
|
|
|
entryColorCodePriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2),
|
|
tertiary(3)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"color code priority."
|
|
::={whispSmColorCodeEntry 2}
|
|
|
|
whispSmAPEvalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WhispSmAPEvalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AP Eval List."
|
|
::= {whispSm 10}
|
|
|
|
whispSmAPEvalEntry OBJECT-TYPE
|
|
SYNTAX WhispSmAPEvalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Evaluation of AP and BHM Entries"
|
|
INDEX {evalIndex}
|
|
::= {whispSmAPEvalTable 1}
|
|
|
|
WhispSmAPEvalEntry ::= SEQUENCE{
|
|
evalIndex INTEGER,
|
|
evalFrequency INTEGER,
|
|
evalChannelBandwidth INTEGER,
|
|
evalCyclicPrefix INTEGER,
|
|
evalESN PhysAddress,
|
|
evalRegion DisplayString,
|
|
evalBeaconReceivePowerCombined INTEGER,
|
|
evalBeaconReceivePowerH INTEGER,
|
|
evalBeaconReceivePowerV INTEGER,
|
|
evalFECEnable INTEGER,
|
|
evalType INTEGER,
|
|
evalAvail INTEGER,
|
|
evalAge INTEGER,
|
|
evalLockout INTEGER,
|
|
evalRegFail INTEGER,
|
|
evalRange INTEGER,
|
|
evalMaxRange INTEGER,
|
|
evalTxBER INTEGER,
|
|
evalEBCast INTEGER,
|
|
evalSessionCount INTEGER,
|
|
evalNoLuid INTEGER,
|
|
evalOutOfRange INTEGER,
|
|
evalAuthFail INTEGER,
|
|
evalEncryptFail INTEGER,
|
|
evalReScanReq INTEGER,
|
|
evalLimitReached INTEGER,
|
|
evalNoVCs INTEGER,
|
|
evalVCReserveFail INTEGER,
|
|
evalVCActFail INTEGER,
|
|
evalTxPower INTEGER,
|
|
evalReceiveTargetLevel INTEGER,
|
|
evalColorCode INTEGER,
|
|
evalBeaconVersion INTEGER,
|
|
evalSectorUserCount INTEGER,
|
|
evalSyncSrc INTEGER,
|
|
evalNumULSlots INTEGER,
|
|
evalNumDLSlots INTEGER,
|
|
evalNumULContSlots INTEGER,
|
|
evalICC INTEGER,
|
|
evalAuthentication INTEGER,
|
|
evalSMPPPoE INTEGER,
|
|
evalPToPVLAN INTEGER,
|
|
evalFramePeriod INTEGER
|
|
}
|
|
|
|
evalIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of the radio seen in the scan"
|
|
::={whispSmAPEvalEntry 1}
|
|
|
|
evalFrequency OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Frequency in KHz"
|
|
::={whispSmAPEvalEntry 2}
|
|
|
|
evalChannelBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bandwidth3Point5MHz(0),
|
|
bandwidth5MHz(1),
|
|
bandwidth7MHz(2),
|
|
bandwidth10MHz(3),
|
|
bandwidth15MHz(4),
|
|
bandwidth20MHz(5),
|
|
bandwidth30MHz(6),
|
|
bandwidth40MHz(7)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Bandwidth"
|
|
::={whispSmAPEvalEntry 3}
|
|
|
|
evalCyclicPrefix OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
one-quarter(0),
|
|
one-eighth(1),
|
|
one-sixteenth(2)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Cyclic Prefix value, for OFDM Radios only."
|
|
::={whispSmAPEvalEntry 4}
|
|
|
|
evalESN OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio ESN"
|
|
::={whispSmAPEvalEntry 5}
|
|
|
|
evalRegion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Region"
|
|
::={whispSmAPEvalEntry 6}
|
|
|
|
evalBeaconReceivePowerCombined OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Beacon Receive Power Combined in dBm(rounded to nearest integer)"
|
|
::={whispSmAPEvalEntry 7}
|
|
|
|
evalBeaconReceivePowerH OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Beacon Receive Power in dBm(rounded to nearest integer) for Path H(MIMO Radios only)"
|
|
::={whispSmAPEvalEntry 8}
|
|
|
|
evalBeaconReceivePowerV OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Beacon Receive Power in dBm(rounded to nearest integer) for Path V(MIMO Radios only)"
|
|
::={whispSmAPEvalEntry 9}
|
|
|
|
evalFECEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forward Error Correction Enabled Status.
|
|
Note, this is always enabled on 450 and forward."
|
|
::={whispSmAPEvalEntry 10}
|
|
|
|
evalType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
multipoint(0),
|
|
point-to-point(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio Type (Point-to-Point or Multipoint)"
|
|
::={whispSmAPEvalEntry 11}
|
|
|
|
evalAvail OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns True if seen on the previous SM's scan"
|
|
::={whispSmAPEvalEntry 12}
|
|
|
|
evalAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of minutes since index was last seen"
|
|
::={whispSmAPEvalEntry 13}
|
|
|
|
evalLockout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of minutes radio is currently locked out"
|
|
::={whispSmAPEvalEntry 14}
|
|
|
|
evalRegFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Registration Fail Count"
|
|
::={whispSmAPEvalEntry 15}
|
|
|
|
evalRange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Range in feet"
|
|
::={whispSmAPEvalEntry 16}
|
|
|
|
evalMaxRange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max Range is in miles"
|
|
::={whispSmAPEvalEntry 17}
|
|
|
|
evalTxBER OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Radio is transmitting Bit Error Rate symbol or not
|
|
Note: This is always enabled on 450 and forward"
|
|
::={whispSmAPEvalEntry 18}
|
|
|
|
evalEBCast OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
false(0),
|
|
true(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Broadcast Encryption status"
|
|
::={whispSmAPEvalEntry 19}
|
|
|
|
evalSessionCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Session Count"
|
|
::={whispSmAPEvalEntry 20}
|
|
|
|
evalNoLuid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to No Luid"
|
|
::={whispSmAPEvalEntry 21}
|
|
|
|
evalOutOfRange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to out of range"
|
|
::={whispSmAPEvalEntry 22}
|
|
|
|
evalAuthFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to authentication failure"
|
|
::={whispSmAPEvalEntry 23}
|
|
|
|
evalEncryptFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to encrypt fail"
|
|
::={whispSmAPEvalEntry 24}
|
|
|
|
evalReScanReq OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rescan request count"
|
|
::={whispSmAPEvalEntry 25}
|
|
|
|
evalLimitReached OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times failed when trying to register with an limited AP maxed out"
|
|
::={whispSmAPEvalEntry 26}
|
|
|
|
evalNoVCs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to No VCs"
|
|
::={whispSmAPEvalEntry 27}
|
|
|
|
evalVCReserveFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to VC reserve fail"
|
|
::={whispSmAPEvalEntry 28}
|
|
|
|
evalVCActFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the registration request has been rejected due to VC activate fail"
|
|
::={whispSmAPEvalEntry 29}
|
|
|
|
evalTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Transmit Power in dBm"
|
|
::={whispSmAPEvalEntry 30}
|
|
|
|
evalReceiveTargetLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Receive Target Level(in dBm)(PMP only)"
|
|
::={whispSmAPEvalEntry 31}
|
|
|
|
evalColorCode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Color Code"
|
|
::={whispSmAPEvalEntry 32}
|
|
|
|
evalBeaconVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Beacon Version"
|
|
::={whispSmAPEvalEntry 33}
|
|
|
|
evalSectorUserCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sector User Count(AP only)"
|
|
::={whispSmAPEvalEntry 34}
|
|
|
|
evalSyncSrc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
generate-sync(0),
|
|
gps-sync(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sync Source(PMP only)"
|
|
::={whispSmAPEvalEntry 35}
|
|
|
|
evalNumULSlots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of uplink slots"
|
|
::={whispSmAPEvalEntry 36}
|
|
|
|
evalNumDLSlots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of downlink slots"
|
|
::={whispSmAPEvalEntry 37}
|
|
|
|
evalNumULContSlots OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of uplink contention slots(PMP only)"
|
|
::={whispSmAPEvalEntry 38}
|
|
|
|
evalICC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Instalaton Color Code(PMP only)"
|
|
::={whispSmAPEvalEntry 39}
|
|
|
|
evalAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication Setting(PMP only)"
|
|
::={whispSmAPEvalEntry 40}
|
|
|
|
evalSMPPPoE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-supported(0),
|
|
suported(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SM PPPoE status(PMP only)"
|
|
::={whispSmAPEvalEntry 41}
|
|
|
|
evalPToPVLAN OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-supported(0),
|
|
suported(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PToP VLAN"
|
|
::={whispSmAPEvalEntry 42}
|
|
|
|
evalFramePeriod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
twoPointFiveMs(0),
|
|
fiveMs(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Period"
|
|
::={whispSmAPEvalEntry 43}
|
|
|
|
|
|
END
|