mibs/MIBS/ciena/CIENA-WS-ALARM-MIB

462 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- This file was automatically generated from ciena-ws-alarm.yang. Do not edit.
CIENA-WS-ALARM-MIB DEFINITIONS ::= BEGIN
IMPORTS
cienaWsConfig
FROM CIENA-WS-MIB
StringMaxl16, StringMaxl32, StringMaxl44
FROM CIENA-WS-TYPEDEFS-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC;
cienaWsAlarmMIB MODULE-IDENTITY
LAST-UPDATED "201703140000Z"
ORGANIZATION "Ciena Corporation"
CONTACT-INFO "Web URL: http://www.ciena.com/
Postal: 7035 Ridge Road
Hanover, Maryland 21076
U.S.A.
Phone: +1 800-921-1144
Fax: +1 410-694-5750"
DESCRIPTION "This module defines alarm data for the Waveserver."
REVISION "201703140000Z"
DESCRIPTION "Waveserver Release 1.4
Changed the maximum length of alarm description to 44.
Aligned MIB files to respect YANG read/write status."
REVISION "201612120000Z"
DESCRIPTION "Waveserver Rel 1.3 revision"
REVISION "201606270000Z"
DESCRIPTION "Waveserver Rel 1.2 revised.
Restructuring of the module."
REVISION "201505200000Z"
DESCRIPTION "Initial version."
::= { cienaWsConfig 4 }
AlarmReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "None"
SYNTAX INTEGER { reset(1), set(2), acknowledge(5), clear(6), delete(7), config(9) }
AlarmSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "None"
SYNTAX INTEGER { cleared(1), critical(3), major(4), minor(5), warning(6), info(8) }
cwsAlarmActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsAlarmActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Active alarms"
::= { cienaWsAlarmMIB 3 }
cwsAlarmActiveEntry OBJECT-TYPE
SYNTAX CwsAlarmActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsAlarmActiveTable."
INDEX { cwsAlarmActiveAlarmInstanceId }
::= { cwsAlarmActiveTable 1 }
CwsAlarmActiveEntry ::= SEQUENCE {
cwsAlarmActiveAlarmInstanceId Integer32,
cwsAlarmActiveAcknowledged TruthValue,
cwsAlarmActiveAlarmTableId Unsigned32,
cwsAlarmActiveSeverity AlarmSeverity,
cwsAlarmActiveLocalDateTime StringMaxl32,
cwsAlarmActiveInstance StringMaxl32,
cwsAlarmActiveDescription StringMaxl44,
cwsAlarmActiveSiteIdentifier Unsigned32,
cwsAlarmActiveGroupIdentifier Unsigned32,
cwsAlarmActiveMemberIdentifier Unsigned32
}
cwsAlarmActiveAlarmInstanceId OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The alarm Instance ID"
::= { cwsAlarmActiveEntry 1 }
cwsAlarmActiveAcknowledged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm has been acknowledged."
::= { cwsAlarmActiveEntry 2 }
cwsAlarmActiveAlarmTableId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm table ID."
::= { cwsAlarmActiveEntry 3 }
cwsAlarmActiveSeverity OBJECT-TYPE
SYNTAX AlarmSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm severity."
::= { cwsAlarmActiveEntry 4 }
cwsAlarmActiveLocalDateTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local date and time when alarm was raised."
::= { cwsAlarmActiveEntry 5 }
cwsAlarmActiveInstance OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object instance the alarm is raised against."
::= { cwsAlarmActiveEntry 6 }
cwsAlarmActiveDescription OBJECT-TYPE
SYNTAX StringMaxl44
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm description."
::= { cwsAlarmActiveEntry 7 }
cwsAlarmActiveSiteIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
::= { cwsAlarmActiveEntry 8 }
cwsAlarmActiveGroupIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
::= { cwsAlarmActiveEntry 9 }
cwsAlarmActiveMemberIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
::= { cwsAlarmActiveEntry 10 }
cwsAlarmHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsAlarmHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Alarm history"
::= { cienaWsAlarmMIB 4 }
cwsAlarmHistoryEntry OBJECT-TYPE
SYNTAX CwsAlarmHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsAlarmHistoryTable."
INDEX { cwsAlarmHistoryHistoryId }
::= { cwsAlarmHistoryTable 1 }
CwsAlarmHistoryEntry ::= SEQUENCE {
cwsAlarmHistoryHistoryId Integer32,
cwsAlarmHistoryReason AlarmReason,
cwsAlarmHistoryAlarmInstanceId Unsigned32,
cwsAlarmHistoryAlarmTableId Unsigned32,
cwsAlarmHistorySeverity AlarmSeverity,
cwsAlarmHistoryLocalDateTime StringMaxl32,
cwsAlarmHistoryInstance StringMaxl32,
cwsAlarmHistoryDescription StringMaxl44,
cwsAlarmHistorySiteIdentifier Unsigned32,
cwsAlarmHistoryGroupIdentifier Unsigned32,
cwsAlarmHistoryMemberIdentifier Unsigned32
}
cwsAlarmHistoryHistoryId OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The alarm history ID"
::= { cwsAlarmHistoryEntry 1 }
cwsAlarmHistoryReason OBJECT-TYPE
SYNTAX AlarmReason
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The reason for the alarm condition."
::= { cwsAlarmHistoryEntry 2 }
cwsAlarmHistoryAlarmInstanceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm instance ID."
::= { cwsAlarmHistoryEntry 3 }
cwsAlarmHistoryAlarmTableId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm table ID."
::= { cwsAlarmHistoryEntry 4 }
cwsAlarmHistorySeverity OBJECT-TYPE
SYNTAX AlarmSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm severity."
::= { cwsAlarmHistoryEntry 5 }
cwsAlarmHistoryLocalDateTime OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local date and time when alarm was raised."
::= { cwsAlarmHistoryEntry 6 }
cwsAlarmHistoryInstance OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object instance the alarm is raised against."
::= { cwsAlarmHistoryEntry 7 }
cwsAlarmHistoryDescription OBJECT-TYPE
SYNTAX StringMaxl44
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm description."
::= { cwsAlarmHistoryEntry 8 }
cwsAlarmHistorySiteIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
::= { cwsAlarmHistoryEntry 9 }
cwsAlarmHistoryGroupIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
::= { cwsAlarmHistoryEntry 10 }
cwsAlarmHistoryMemberIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
::= { cwsAlarmHistoryEntry 11 }
cwsAlarmDefinedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsAlarmDefinedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defined Alarm Table"
::= { cienaWsAlarmMIB 5 }
cwsAlarmDefinedEntry OBJECT-TYPE
SYNTAX CwsAlarmDefinedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsAlarmDefinedTable."
INDEX { cwsAlarmDefinedAlarmTableId }
::= { cwsAlarmDefinedTable 1 }
CwsAlarmDefinedEntry ::= SEQUENCE {
cwsAlarmDefinedAlarmTableId Integer32,
cwsAlarmDefinedEnabled TruthValue,
cwsAlarmDefinedActive TruthValue,
cwsAlarmDefinedThreshold Unsigned32,
cwsAlarmDefinedCap Unsigned32,
cwsAlarmDefinedSeverity AlarmSeverity,
cwsAlarmDefinedInstance StringMaxl16,
cwsAlarmDefinedDescription StringMaxl44
}
cwsAlarmDefinedAlarmTableId OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The alarm table ID."
::= { cwsAlarmDefinedEntry 1 }
cwsAlarmDefinedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm is enabled."
::= { cwsAlarmDefinedEntry 2 }
cwsAlarmDefinedActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Alarm is active."
::= { cwsAlarmDefinedEntry 3 }
cwsAlarmDefinedThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm threshold."
::= { cwsAlarmDefinedEntry 4 }
cwsAlarmDefinedCap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm cap."
::= { cwsAlarmDefinedEntry 5 }
cwsAlarmDefinedSeverity OBJECT-TYPE
SYNTAX AlarmSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm severity."
::= { cwsAlarmDefinedEntry 6 }
cwsAlarmDefinedInstance OBJECT-TYPE
SYNTAX StringMaxl16
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The object instance the alarm is raised against."
::= { cwsAlarmDefinedEntry 7 }
cwsAlarmDefinedDescription OBJECT-TYPE
SYNTAX StringMaxl44
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm description."
::= { cwsAlarmDefinedEntry 8 }
cwsAlarmStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwsAlarmStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Waveserver Alarm Statistics."
::= { cienaWsAlarmMIB 6 }
cwsAlarmStatisticsEntry OBJECT-TYPE
SYNTAX CwsAlarmStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cwsAlarmStatisticsTable."
INDEX { cwsAlarmStatisticsIndex }
::= { cwsAlarmStatisticsTable 1 }
CwsAlarmStatisticsEntry ::= SEQUENCE {
cwsAlarmStatisticsIndex Integer32,
cwsAlarmStatisticsActive TruthValue,
cwsAlarmStatisticsDisabled TruthValue,
cwsAlarmStatisticsCount Unsigned32,
cwsAlarmStatisticsCumulative Unsigned32,
cwsAlarmStatisticsType StringMaxl32
}
cwsAlarmStatisticsIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The alarm statistics table index."
::= { cwsAlarmStatisticsEntry 1 }
cwsAlarmStatisticsActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "There is alarm active for the alarm type"
::= { cwsAlarmStatisticsEntry 2 }
cwsAlarmStatisticsDisabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "There is alarm disabled for the alarm type"
::= { cwsAlarmStatisticsEntry 3 }
cwsAlarmStatisticsCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The count of active alarms for the alarm type"
::= { cwsAlarmStatisticsEntry 4 }
cwsAlarmStatisticsCumulative OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cumulative count of active alarms for the alarm type "
::= { cwsAlarmStatisticsEntry 5 }
cwsAlarmStatisticsType OBJECT-TYPE
SYNTAX StringMaxl32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alarm type."
::= { cwsAlarmStatisticsEntry 6 }
-- Conformance statements
cienaWsAlarmObjects OBJECT IDENTIFIER
::= { cienaWsAlarmMIB 1 }
cienaWsAlarmConformance OBJECT IDENTIFIER
::= { cienaWsAlarmMIB 2 }
cienaWsAlarmGroups OBJECT IDENTIFIER
::= { cienaWsAlarmConformance 1 }
cienaWsAlarmGroup OBJECT-GROUP
OBJECTS {
cwsAlarmActiveAcknowledged,
cwsAlarmActiveAlarmTableId,
cwsAlarmActiveSeverity,
cwsAlarmActiveLocalDateTime,
cwsAlarmActiveInstance,
cwsAlarmActiveDescription,
cwsAlarmActiveSiteIdentifier,
cwsAlarmActiveGroupIdentifier,
cwsAlarmActiveMemberIdentifier,
cwsAlarmHistoryReason,
cwsAlarmHistoryAlarmInstanceId,
cwsAlarmHistoryAlarmTableId,
cwsAlarmHistorySeverity,
cwsAlarmHistoryLocalDateTime,
cwsAlarmHistoryInstance,
cwsAlarmHistoryDescription,
cwsAlarmHistorySiteIdentifier,
cwsAlarmHistoryGroupIdentifier,
cwsAlarmHistoryMemberIdentifier,
cwsAlarmDefinedEnabled,
cwsAlarmDefinedActive,
cwsAlarmDefinedThreshold,
cwsAlarmDefinedCap,
cwsAlarmDefinedSeverity,
cwsAlarmDefinedInstance,
cwsAlarmDefinedDescription,
cwsAlarmStatisticsActive,
cwsAlarmStatisticsDisabled,
cwsAlarmStatisticsCount,
cwsAlarmStatisticsCumulative,
cwsAlarmStatisticsType
}
STATUS current
DESCRIPTION "Conformance Group"
::= { cienaWsAlarmGroups 1 }
cienaWsAlarmCompliances OBJECT IDENTIFIER
::= { cienaWsAlarmConformance 2 }
cienaWsAlarmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance"
MODULE MANDATORY-GROUPS { cienaWsAlarmGroup }
::= { cienaWsAlarmCompliances 1 }
END -- End module