462 lines
14 KiB
Plaintext
462 lines
14 KiB
Plaintext
-- This file was automatically generated from ciena-ws-alarm.yang. Do not edit.
|
|
|
|
CIENA-WS-ALARM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
cienaWsConfig
|
|
FROM CIENA-WS-MIB
|
|
StringMaxl16, StringMaxl32, StringMaxl44
|
|
FROM CIENA-WS-TYPEDEFS-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC;
|
|
|
|
cienaWsAlarmMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201703140000Z"
|
|
ORGANIZATION "Ciena Corporation"
|
|
CONTACT-INFO "Web URL: http://www.ciena.com/
|
|
Postal: 7035 Ridge Road
|
|
Hanover, Maryland 21076
|
|
U.S.A.
|
|
Phone: +1 800-921-1144
|
|
Fax: +1 410-694-5750"
|
|
DESCRIPTION "This module defines alarm data for the Waveserver."
|
|
REVISION "201703140000Z"
|
|
DESCRIPTION "Waveserver Release 1.4
|
|
Changed the maximum length of alarm description to 44.
|
|
Aligned MIB files to respect YANG read/write status."
|
|
REVISION "201612120000Z"
|
|
DESCRIPTION "Waveserver Rel 1.3 revision"
|
|
REVISION "201606270000Z"
|
|
DESCRIPTION "Waveserver Rel 1.2 revised.
|
|
Restructuring of the module."
|
|
REVISION "201505200000Z"
|
|
DESCRIPTION "Initial version."
|
|
::= { cienaWsConfig 4 }
|
|
|
|
AlarmReason ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "None"
|
|
SYNTAX INTEGER { reset(1), set(2), acknowledge(5), clear(6), delete(7), config(9) }
|
|
|
|
AlarmSeverity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION "None"
|
|
SYNTAX INTEGER { cleared(1), critical(3), major(4), minor(5), warning(6), info(8) }
|
|
|
|
cwsAlarmActiveTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwsAlarmActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Active alarms"
|
|
::= { cienaWsAlarmMIB 3 }
|
|
|
|
cwsAlarmActiveEntry OBJECT-TYPE
|
|
SYNTAX CwsAlarmActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for cwsAlarmActiveTable."
|
|
INDEX { cwsAlarmActiveAlarmInstanceId }
|
|
::= { cwsAlarmActiveTable 1 }
|
|
|
|
CwsAlarmActiveEntry ::= SEQUENCE {
|
|
cwsAlarmActiveAlarmInstanceId Integer32,
|
|
cwsAlarmActiveAcknowledged TruthValue,
|
|
cwsAlarmActiveAlarmTableId Unsigned32,
|
|
cwsAlarmActiveSeverity AlarmSeverity,
|
|
cwsAlarmActiveLocalDateTime StringMaxl32,
|
|
cwsAlarmActiveInstance StringMaxl32,
|
|
cwsAlarmActiveDescription StringMaxl44,
|
|
cwsAlarmActiveSiteIdentifier Unsigned32,
|
|
cwsAlarmActiveGroupIdentifier Unsigned32,
|
|
cwsAlarmActiveMemberIdentifier Unsigned32
|
|
}
|
|
|
|
cwsAlarmActiveAlarmInstanceId OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The alarm Instance ID"
|
|
::= { cwsAlarmActiveEntry 1 }
|
|
|
|
cwsAlarmActiveAcknowledged OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Alarm has been acknowledged."
|
|
::= { cwsAlarmActiveEntry 2 }
|
|
|
|
cwsAlarmActiveAlarmTableId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm table ID."
|
|
::= { cwsAlarmActiveEntry 3 }
|
|
|
|
cwsAlarmActiveSeverity OBJECT-TYPE
|
|
SYNTAX AlarmSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm severity."
|
|
::= { cwsAlarmActiveEntry 4 }
|
|
|
|
cwsAlarmActiveLocalDateTime OBJECT-TYPE
|
|
SYNTAX StringMaxl32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local date and time when alarm was raised."
|
|
::= { cwsAlarmActiveEntry 5 }
|
|
|
|
cwsAlarmActiveInstance OBJECT-TYPE
|
|
SYNTAX StringMaxl32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object instance the alarm is raised against."
|
|
::= { cwsAlarmActiveEntry 6 }
|
|
|
|
cwsAlarmActiveDescription OBJECT-TYPE
|
|
SYNTAX StringMaxl44
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm description."
|
|
::= { cwsAlarmActiveEntry 7 }
|
|
|
|
cwsAlarmActiveSiteIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
|
|
::= { cwsAlarmActiveEntry 8 }
|
|
|
|
cwsAlarmActiveGroupIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
|
|
::= { cwsAlarmActiveEntry 9 }
|
|
|
|
cwsAlarmActiveMemberIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
|
|
::= { cwsAlarmActiveEntry 10 }
|
|
|
|
cwsAlarmHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwsAlarmHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Alarm history"
|
|
::= { cienaWsAlarmMIB 4 }
|
|
|
|
cwsAlarmHistoryEntry OBJECT-TYPE
|
|
SYNTAX CwsAlarmHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for cwsAlarmHistoryTable."
|
|
INDEX { cwsAlarmHistoryHistoryId }
|
|
::= { cwsAlarmHistoryTable 1 }
|
|
|
|
CwsAlarmHistoryEntry ::= SEQUENCE {
|
|
cwsAlarmHistoryHistoryId Integer32,
|
|
cwsAlarmHistoryReason AlarmReason,
|
|
cwsAlarmHistoryAlarmInstanceId Unsigned32,
|
|
cwsAlarmHistoryAlarmTableId Unsigned32,
|
|
cwsAlarmHistorySeverity AlarmSeverity,
|
|
cwsAlarmHistoryLocalDateTime StringMaxl32,
|
|
cwsAlarmHistoryInstance StringMaxl32,
|
|
cwsAlarmHistoryDescription StringMaxl44,
|
|
cwsAlarmHistorySiteIdentifier Unsigned32,
|
|
cwsAlarmHistoryGroupIdentifier Unsigned32,
|
|
cwsAlarmHistoryMemberIdentifier Unsigned32
|
|
}
|
|
|
|
cwsAlarmHistoryHistoryId OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The alarm history ID"
|
|
::= { cwsAlarmHistoryEntry 1 }
|
|
|
|
cwsAlarmHistoryReason OBJECT-TYPE
|
|
SYNTAX AlarmReason
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The reason for the alarm condition."
|
|
::= { cwsAlarmHistoryEntry 2 }
|
|
|
|
cwsAlarmHistoryAlarmInstanceId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm instance ID."
|
|
::= { cwsAlarmHistoryEntry 3 }
|
|
|
|
cwsAlarmHistoryAlarmTableId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm table ID."
|
|
::= { cwsAlarmHistoryEntry 4 }
|
|
|
|
cwsAlarmHistorySeverity OBJECT-TYPE
|
|
SYNTAX AlarmSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm severity."
|
|
::= { cwsAlarmHistoryEntry 5 }
|
|
|
|
cwsAlarmHistoryLocalDateTime OBJECT-TYPE
|
|
SYNTAX StringMaxl32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The local date and time when alarm was raised."
|
|
::= { cwsAlarmHistoryEntry 6 }
|
|
|
|
cwsAlarmHistoryInstance OBJECT-TYPE
|
|
SYNTAX StringMaxl32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object instance the alarm is raised against."
|
|
::= { cwsAlarmHistoryEntry 7 }
|
|
|
|
cwsAlarmHistoryDescription OBJECT-TYPE
|
|
SYNTAX StringMaxl44
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm description."
|
|
::= { cwsAlarmHistoryEntry 8 }
|
|
|
|
cwsAlarmHistorySiteIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify the site where this Waveserver is located."
|
|
::= { cwsAlarmHistoryEntry 9 }
|
|
|
|
cwsAlarmHistoryGroupIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify a group of Waveservers within a site."
|
|
::= { cwsAlarmHistoryEntry 10 }
|
|
|
|
cwsAlarmHistoryMemberIdentifier OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An integer to uniquely identify a Waveserver chassis within a group of Waveservers. Initial configuration of this identifier automatically assigns 2 specific wavelengths for the Ciena wavelength grid to the Wavelogic 3 Extreme ports 1 and 12. Wavelengths can also be manually assigned independently."
|
|
::= { cwsAlarmHistoryEntry 11 }
|
|
|
|
cwsAlarmDefinedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwsAlarmDefinedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Defined Alarm Table"
|
|
::= { cienaWsAlarmMIB 5 }
|
|
|
|
cwsAlarmDefinedEntry OBJECT-TYPE
|
|
SYNTAX CwsAlarmDefinedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for cwsAlarmDefinedTable."
|
|
INDEX { cwsAlarmDefinedAlarmTableId }
|
|
::= { cwsAlarmDefinedTable 1 }
|
|
|
|
CwsAlarmDefinedEntry ::= SEQUENCE {
|
|
cwsAlarmDefinedAlarmTableId Integer32,
|
|
cwsAlarmDefinedEnabled TruthValue,
|
|
cwsAlarmDefinedActive TruthValue,
|
|
cwsAlarmDefinedThreshold Unsigned32,
|
|
cwsAlarmDefinedCap Unsigned32,
|
|
cwsAlarmDefinedSeverity AlarmSeverity,
|
|
cwsAlarmDefinedInstance StringMaxl16,
|
|
cwsAlarmDefinedDescription StringMaxl44
|
|
}
|
|
|
|
cwsAlarmDefinedAlarmTableId OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The alarm table ID."
|
|
::= { cwsAlarmDefinedEntry 1 }
|
|
|
|
cwsAlarmDefinedEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Alarm is enabled."
|
|
::= { cwsAlarmDefinedEntry 2 }
|
|
|
|
cwsAlarmDefinedActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Alarm is active."
|
|
::= { cwsAlarmDefinedEntry 3 }
|
|
|
|
cwsAlarmDefinedThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm threshold."
|
|
::= { cwsAlarmDefinedEntry 4 }
|
|
|
|
cwsAlarmDefinedCap OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm cap."
|
|
::= { cwsAlarmDefinedEntry 5 }
|
|
|
|
cwsAlarmDefinedSeverity OBJECT-TYPE
|
|
SYNTAX AlarmSeverity
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm severity."
|
|
::= { cwsAlarmDefinedEntry 6 }
|
|
|
|
cwsAlarmDefinedInstance OBJECT-TYPE
|
|
SYNTAX StringMaxl16
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The object instance the alarm is raised against."
|
|
::= { cwsAlarmDefinedEntry 7 }
|
|
|
|
cwsAlarmDefinedDescription OBJECT-TYPE
|
|
SYNTAX StringMaxl44
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm description."
|
|
::= { cwsAlarmDefinedEntry 8 }
|
|
|
|
cwsAlarmStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwsAlarmStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Waveserver Alarm Statistics."
|
|
::= { cienaWsAlarmMIB 6 }
|
|
|
|
cwsAlarmStatisticsEntry OBJECT-TYPE
|
|
SYNTAX CwsAlarmStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Entry for cwsAlarmStatisticsTable."
|
|
INDEX { cwsAlarmStatisticsIndex }
|
|
::= { cwsAlarmStatisticsTable 1 }
|
|
|
|
CwsAlarmStatisticsEntry ::= SEQUENCE {
|
|
cwsAlarmStatisticsIndex Integer32,
|
|
cwsAlarmStatisticsActive TruthValue,
|
|
cwsAlarmStatisticsDisabled TruthValue,
|
|
cwsAlarmStatisticsCount Unsigned32,
|
|
cwsAlarmStatisticsCumulative Unsigned32,
|
|
cwsAlarmStatisticsType StringMaxl32
|
|
}
|
|
|
|
cwsAlarmStatisticsIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The alarm statistics table index."
|
|
::= { cwsAlarmStatisticsEntry 1 }
|
|
|
|
cwsAlarmStatisticsActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "There is alarm active for the alarm type"
|
|
::= { cwsAlarmStatisticsEntry 2 }
|
|
|
|
cwsAlarmStatisticsDisabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "There is alarm disabled for the alarm type"
|
|
::= { cwsAlarmStatisticsEntry 3 }
|
|
|
|
cwsAlarmStatisticsCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The count of active alarms for the alarm type"
|
|
::= { cwsAlarmStatisticsEntry 4 }
|
|
|
|
cwsAlarmStatisticsCumulative OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The cumulative count of active alarms for the alarm type "
|
|
::= { cwsAlarmStatisticsEntry 5 }
|
|
|
|
cwsAlarmStatisticsType OBJECT-TYPE
|
|
SYNTAX StringMaxl32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The alarm type."
|
|
::= { cwsAlarmStatisticsEntry 6 }
|
|
|
|
|
|
|
|
-- Conformance statements
|
|
cienaWsAlarmObjects OBJECT IDENTIFIER
|
|
::= { cienaWsAlarmMIB 1 }
|
|
|
|
cienaWsAlarmConformance OBJECT IDENTIFIER
|
|
::= { cienaWsAlarmMIB 2 }
|
|
|
|
cienaWsAlarmGroups OBJECT IDENTIFIER
|
|
::= { cienaWsAlarmConformance 1 }
|
|
|
|
cienaWsAlarmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cwsAlarmActiveAcknowledged,
|
|
cwsAlarmActiveAlarmTableId,
|
|
cwsAlarmActiveSeverity,
|
|
cwsAlarmActiveLocalDateTime,
|
|
cwsAlarmActiveInstance,
|
|
cwsAlarmActiveDescription,
|
|
cwsAlarmActiveSiteIdentifier,
|
|
cwsAlarmActiveGroupIdentifier,
|
|
cwsAlarmActiveMemberIdentifier,
|
|
cwsAlarmHistoryReason,
|
|
cwsAlarmHistoryAlarmInstanceId,
|
|
cwsAlarmHistoryAlarmTableId,
|
|
cwsAlarmHistorySeverity,
|
|
cwsAlarmHistoryLocalDateTime,
|
|
cwsAlarmHistoryInstance,
|
|
cwsAlarmHistoryDescription,
|
|
cwsAlarmHistorySiteIdentifier,
|
|
cwsAlarmHistoryGroupIdentifier,
|
|
cwsAlarmHistoryMemberIdentifier,
|
|
cwsAlarmDefinedEnabled,
|
|
cwsAlarmDefinedActive,
|
|
cwsAlarmDefinedThreshold,
|
|
cwsAlarmDefinedCap,
|
|
cwsAlarmDefinedSeverity,
|
|
cwsAlarmDefinedInstance,
|
|
cwsAlarmDefinedDescription,
|
|
cwsAlarmStatisticsActive,
|
|
cwsAlarmStatisticsDisabled,
|
|
cwsAlarmStatisticsCount,
|
|
cwsAlarmStatisticsCumulative,
|
|
cwsAlarmStatisticsType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "Conformance Group"
|
|
::= { cienaWsAlarmGroups 1 }
|
|
|
|
cienaWsAlarmCompliances OBJECT IDENTIFIER
|
|
::= { cienaWsAlarmConformance 2 }
|
|
|
|
cienaWsAlarmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "Compliance"
|
|
MODULE MANDATORY-GROUPS { cienaWsAlarmGroup }
|
|
::= { cienaWsAlarmCompliances 1 }
|
|
|
|
END -- End module
|