david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/AIRESPACE-SWITCHING-MIB

4069 lines
147 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *******************************************************************
-- Airespace Switching MIB
-- Copyright 2001 Airespace, Inc. All rights reserved.
-- This SNMP Management Information Specification
-- embodies Airespace's confidential and proprietary
-- intellectual property. LVL7 Systems retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Airespace
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
-- Status: Release
-- Version: 3.2
-- Internal Source Code Version:1.75
-- Date: 19 Dec 2005
-- *******************************************************************
AIRESPACE-SWITCHING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress,
Counter32, Integer32, Unsigned32, TimeTicks
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
DisplayString, PhysAddress,
RowStatus, MacAddress, TruthValue FROM SNMPv2-TC
airespace FROM AIRESPACE-REF-MIB
dot1qVlanIndex, dot1qFdbId FROM Q-BRIDGE-MIB
IANAifType FROM IANAifType-MIB;
--********************************************************************
--* MODULE IDENTITY
--********************************************************************
bsnSwitching MODULE-IDENTITY
LAST-UPDATED "200604100000Z"
ORGANIZATION "Airespace, Inc."
CONTACT-INFO
" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration, statistics and
status information about the controller.
This includes controller statistics and provides
information such as Inventory, Trap logs, memory and
CPU. This MIB also provides configuration of CLI,
SNMP, LAG, DHCP, Spanning Tree, etc.
The relationship between controller and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Station Management (SMT)
This term refers to the internal management of the
802.11 protocol operations by the AP to work
cooperatively with the other APs and 802.11
devices in the network.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol. "
REVISION "200604100000Z"
DESCRIPTION
"Updated MIB with description and format"
::= { airespace 1 }
--********************************************************************
-- Major sections
--********************************************************************
agentInfoGroup OBJECT IDENTIFIER ::= { bsnSwitching 1 }
agentConfigGroup OBJECT IDENTIFIER ::= { bsnSwitching 2 }
agentSystemGroup OBJECT IDENTIFIER ::= { bsnSwitching 3 }
stats OBJECT IDENTIFIER ::= { bsnSwitching 4 }
switchingTraps OBJECT IDENTIFIER ::= { bsnSwitching 50 }
bsnSwitchingGroups OBJECT IDENTIFIER ::= { bsnSwitching 51 }
bsnSwitchingCompliances OBJECT IDENTIFIER ::= { bsnSwitching 52 }
--********************************************************************
-- agentInventoryGroup
--********************************************************************
agentInventoryGroup OBJECT IDENTIFIER ::= { agentInfoGroup 1 }
agentInventorySysDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Inventory system description."
::= { agentInventoryGroup 1 }
agentInventoryMachineType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the Machine used in the Switch."
::= { agentInventoryGroup 2 }
agentInventoryMachineModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Machine Model. "
::= { agentInventoryGroup 3 }
agentInventorySerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of the switch."
::= { agentInventoryGroup 4 }
agentInventoryMaintenanceLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Inventory Maintenance Level"
::= { agentInventoryGroup 6 }
agentInventoryBurnedInMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burned-In MAC Address"
::= { agentInventoryGroup 9 }
agentInventoryOperatingSystem OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operating System running on this unit"
::= { agentInventoryGroup 10 }
agentInventoryManufacturerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the switch manufacturer."
::= { agentInventoryGroup 12 }
agentInventoryProductName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the product."
::= { agentInventoryGroup 13 }
agentInventoryProductVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the product."
::= { agentInventoryGroup 14 }
agentInventoryIsGigECardPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the Switch contains a Gigabit ethernet
card
."
::= { agentInventoryGroup 15 }
agentInventoryIsCryptoCardPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the switch is carrying a Crypto card."
::= { agentInventoryGroup 16 }
agentInventoryIsForeignAPSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"States whether the switch supports third party
Access Points."
::= { agentInventoryGroup 17 }
agentInventoryMaxNumberOfAPsSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of APs supported with this
Controller."
::= { agentInventoryGroup 18 }
agentInventoryIsCryptoCard2Present OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the switch is carrying second Crypto
card for 4400 controller."
::= { agentInventoryGroup 19 }
agentInventoryFipsModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if FIPS (Federal Information Processing
Standards) mode has been enabled on the
controller.False if FIPS mode has not been
enabled. FIPS mode can only be enabled through
console."
DEFVAL {false}
::= { agentInventoryGroup 20 }
--********************************************************************
-- agentTrapLogGroup
--********************************************************************
agentTrapLogGroup OBJECT IDENTIFIER ::= { agentInfoGroup 2}
agentTrapLogTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of traps sent since last
reset."
::= { agentTrapLogGroup 1 }
agentTrapLogTotalSinceLastViewed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of traps sent since last viewed."
::= { agentTrapLogGroup 3 }
agentRadioUpDownTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Up/Down traps sent since
last reset."
::= { agentTrapLogGroup 5 }
agentApAssociateDisassociateTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Associate/Disassociate
traps sent since last reset."
::= { agentTrapLogGroup 6 }
agentApLoadProfileFailTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Load Profile Failure
traps sent since last reset."
::= { agentTrapLogGroup 7 }
agentApNoiseProfileFailTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Noise Profile Failure
traps sent since last reset."
::= { agentTrapLogGroup 8 }
agentApInterferenceProfileFailTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Interference Profile
Failure traps sent since last reset."
::= { agentTrapLogGroup 9 }
agentApCoverageProfileFailTrapCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Coverge Profile Failure
traps sent since last reset."
::= { agentTrapLogGroup 10 }
--********************************************************************
-- agentTrapLogTable
--********************************************************************
agentTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Agent Trap Log"
::= { agentTrapLogGroup 4 }
agentTrapLogEntry OBJECT-TYPE
SYNTAX AgentTrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Agent trap log entry"
INDEX { agentTrapLogIndex }
::= { agentTrapLogTable 1 }
AgentTrapLogEntry ::= SEQUENCE {
agentTrapLogIndex Integer32,
agentTrapLogSystemTime DisplayString,
agentTrapLogTrap OCTET STRING
}
agentTrapLogIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index of trap entry"
::= { agentTrapLogEntry 1 }
agentTrapLogSystemTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System uptime when trap was sent. This entry
shows how long the system has been up when the
trap occurred."
::= { agentTrapLogEntry 2 }
agentTrapLogTrap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the trap sent."
::= { agentTrapLogEntry 22 }
--********************************************************************
-- agentSwitchInfoGroup
--********************************************************************
agentSwitchInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 3 }
agentSwitchInfoLwappTransportMode OBJECT-TYPE
SYNTAX INTEGER {
layer2(1),
layer3(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LWAPP transport mode specifies if the switch
is operating in Layer2 or Layer3 mode. This
attribute gives the current mode the switch is
operating on."
::= { agentSwitchInfoGroup 1 }
agentSwitchInfoPowerSupply1Present OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is to indicate if the switch has Power
Supply 1 present on it. This is applicable to
the 4200 series and will always return true for
the earlier device versions."
::= { agentSwitchInfoGroup 2 }
agentSwitchInfoPowerSupply1Operational OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is to indicate if the switch's Power Supply
1 is operational. This is applicable to the
4200 series and will always return true for the
earlier device versions."
::= { agentSwitchInfoGroup 3 }
agentSwitchInfoPowerSupply2Present OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is to indicate if the switch has Power
Supply 2 present on it. This is applicable to
the 4200 series and will always return false for
the earlier device versions."
::= { agentSwitchInfoGroup 4 }
agentSwitchInfoPowerSupply2Operational OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is to indicate if the switch's Power Supply
2 is operational.This is applicable to the 4200
series and will always return false for the
earlier device versions."
::= { agentSwitchInfoGroup 5 }
--********************************************************************
-- agentResourceInfoGroup
--********************************************************************
agentResourceInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 5 }
agentCurrentCPUUtilization OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current CPU Load of the switch in percentage."
::= { agentResourceInfoGroup 1 }
agentTotalMemory OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total RAM of the switch in Kbytes."
::= { agentResourceInfoGroup 2 }
agentFreeMemory OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free RAM of the switch in Kbytes."
::= { agentResourceInfoGroup 3 }
--********************************************************************
-- agentWcpInfoGroup
--********************************************************************
agentWcpInfoGroup OBJECT IDENTIFIER ::= { agentInfoGroup 6 }
agentWcpDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the name of the device this controller
is residing on."
::= { agentWcpInfoGroup 1 }
agentWcpSlotNumber OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number on the Wcp Device that this
controller is residing on."
::= { agentWcpInfoGroup 2 }
agentWcpPortNumber OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on the Wcp Device that this
controller is residing on."
::= { agentWcpInfoGroup 3 }
agentWcpPeerPortNumber OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of this controller's peer on the
same slot on Wcp Device that this controller is
residing on."
::= { agentWcpInfoGroup 4 }
agentWcpPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of this controller's peer on the
same slot on Wcp Device that this controller is
residing on."
::= { agentWcpInfoGroup 5 }
agentWcpControllerTableChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the checksum that tracks the changes in
the agentWcpControllerInfoTable. If there is any
change in the information on this table, the
checksum changes."
::= { agentWcpInfoGroup 6 }
agentWcpControllerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentWcpControllerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the wireless controllers on a WCP
device."
::= { agentWcpInfoGroup 7 }
agentWcpControllerInfoEntry OBJECT-TYPE
SYNTAX AgentWcpControllerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for a wireless controller on a WCP
device."
INDEX { agentWcpControllerInfoSlotNumber,
agentWcpControllerInfoPortNumber }
::= { agentWcpControllerInfoTable 1 }
AgentWcpControllerInfoEntry ::= SEQUENCE {
agentWcpControllerInfoSlotNumber Unsigned32,
agentWcpControllerInfoPortNumber Unsigned32,
agentWcpControllerInfoIpAddress IpAddress
}
agentWcpControllerInfoSlotNumber OBJECT-TYPE
SYNTAX Unsigned32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number on the Wcp device that a
controller is residing on."
::= { agentWcpControllerInfoEntry 1 }
agentWcpControllerInfoPortNumber OBJECT-TYPE
SYNTAX Unsigned32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on the Wcp Device that a
controller is residing on."
::= { agentWcpControllerInfoEntry 2 }
agentWcpControllerInfoIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management IP Address of a controller."
::= { agentWcpControllerInfoEntry 10 }
--********************************************************************
-- agentProductGroup
--********************************************************************
agentProductGroup OBJECT IDENTIFIER ::= { agentInfoGroup 4 }
--********************************************************************
-- productGroup1. This includes the 4000 switch series: 4012, 4024 and
-- the 4100 appliance series: 4101 and 4102
--********************************************************************
productGroup1 OBJECT IDENTIFIER ::= { agentProductGroup 1 }
--********************************************************************
-- productGroup2. This includes the Branch Office Switch series
--********************************************************************
productGroup2 OBJECT IDENTIFIER ::= { agentProductGroup 2 }
--********************************************************************
-- productGroup3. This includes the 4200 switch series: 4202 and 4204
--
--********************************************************************
productGroup3 OBJECT IDENTIFIER ::= { agentProductGroup 3 }
--********************************************************************
-- productGroup4. This includes the Catalyst 6k series with 2
-- 4204s on a single blade
--********************************************************************
productGroup4 OBJECT IDENTIFIER ::= { agentProductGroup 4 }
--********************************************************************
agentCLIConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 1 }
--********************************************************************
-- agentLoginSessionTable
--********************************************************************
agentLoginSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLoginSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the switch's login session"
::= { agentCLIConfigGroup 1 }
agentLoginSessionEntry OBJECT-TYPE
SYNTAX AgentLoginSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login Session Entry"
INDEX { agentLoginSessionIndex }
::= { agentLoginSessionTable 1 }
AgentLoginSessionEntry ::= SEQUENCE {
agentLoginSessionIndex Integer32,
agentLoginSessionUserName DisplayString,
agentLoginSessionIPAddress IpAddress,
agentLoginSessionConnectionType INTEGER,
agentLoginSessionIdleTime TimeTicks,
agentLoginSessionSessionTime TimeTicks,
agentLoginSessionStatus RowStatus
}
agentLoginSessionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session Index of the switch"
::= { agentLoginSessionEntry 1 }
agentLoginSessionUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session UserName of the switch"
::= { agentLoginSessionEntry 2 }
agentLoginSessionIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session IP Address of the switch"
::= { agentLoginSessionEntry 3 }
agentLoginSessionConnectionType OBJECT-TYPE
SYNTAX INTEGER {
serial(1),
telnet(2),
web(3),
ssl(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session Connection Type of the
switch"
::= { agentLoginSessionEntry 4 }
agentLoginSessionIdleTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session Idle Time of the switch"
::= { agentLoginSessionEntry 5 }
agentLoginSessionSessionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Agent Login Session Time of the switch"
::= { agentLoginSessionEntry 6 }
agentLoginSessionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the user.
active(1) - This connection is active.
destroy(6) - Set to this value to disconnect
this user."
::= { agentLoginSessionEntry 26 }
--********************************************************************
-- agentTelnetConfigGroup
--********************************************************************
agentTelnetConfigGroup OBJECT IDENTIFIER ::= {agentCLIConfigGroup 2}
agentTelnetLoginTimeout OBJECT-TYPE
SYNTAX Integer32 (0..160)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Telnet login timeout (minutes)
Config telnet timeout will set the telnet
session timeout value. A session is active as
long as the session has not remained idle for
the value set. Specify a value from 0 to 160.
A value of 0 indicates that a Telnet session
remains active indefinitely.
Note: Changing the timeout value for active
sessions does not become effective until the
session is reaccessed. Any keystroke will
also activate the new timeout duration."
::= { agentTelnetConfigGroup 1 }
agentTelnetMaxSessions OBJECT-TYPE
SYNTAX Integer32 (0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of Telnet Sessions
Config telnet maxsessions is an integer value
from 0 to 5 that specifies the maximum number of
telnet sessions that can be established. If the
value is 0, no Telnet session can be established."
::= { agentTelnetConfigGroup 2 }
agentTelnetAllowNewMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow new telnet sessions (enable or disable)
Config telnet disable means that no new Telnet
sessions are to be established. Any already
established session remains active until
the session is ended or an abnormal network error
ends it. "
::= { agentTelnetConfigGroup 3 }
agentSSHAllowNewMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow new SSH sessions (enable or disable)
Config SSH disable means that no new SSH sessions
are to be established. Any already established
session remains active until the session is ended
or an abnormal network error ends it."
::= { agentTelnetConfigGroup 4 }
--********************************************************************
-- agentSerialGroup
--********************************************************************
agentSerialGroup OBJECT IDENTIFIER ::= { agentCLIConfigGroup 5 }
agentSerialTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Agent Serial Timeout "
::= { agentSerialGroup 1 }
agentSerialBaudrate OBJECT-TYPE
SYNTAX INTEGER {
baud1200(1),
baud2400(2),
baud4800(3),
baud9600(4),
baud19200(5),
baud38400(6),
baud57600(7),
baud115200(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Agent Serial Baudrate"
::= { agentSerialGroup 2 }
agentSerialCharacterSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Agent Serial Character Size"
::= { agentSerialGroup 3 }
agentSerialHWFlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Agent Serial Hardware Flow Control."
::= { agentSerialGroup 4 }
agentSerialStopBits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Agent Serial Stop Bits"
::= { agentSerialGroup 5 }
agentSerialParityType OBJECT-TYPE
SYNTAX INTEGER {
even(1),
odd(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Agent Serial Parity Type"
::= { agentSerialGroup 6 }
--*******************************************************************
-- agentLagConfigGroup
--********************************************************************
agentLagConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 2 }
agentLagConfigCreate OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Agent Lag Create.
When this object is set with a non-empty string,
a new lag will be created.if possible with the
entered string as it's name."
::= { agentLagConfigGroup 1 }
agentLagSummaryConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLagSummaryConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A summary table of the switch's lag config
entries"
::= { agentLagConfigGroup 2 }
agentLagSummaryConfigEntry OBJECT-TYPE
SYNTAX AgentLagSummaryConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Switch's lag config entry"
INDEX { agentLagSummaryName }
::= { agentLagSummaryConfigTable 1 }
AgentLagSummaryConfigEntry ::= SEQUENCE {
agentLagSummaryName DisplayString,
agentLagSummaryLagIndex Integer32,
agentLagSummaryFlushTimer Integer32,
agentLagSummaryLinkTrap INTEGER,
agentLagSummaryAdminMode INTEGER,
agentLagSummaryStpMode INTEGER,
agentLagSummaryAddPort Integer32,
agentLagSummaryDeletePort Integer32,
agentLagSummaryPortsBitMask Unsigned32,
agentLagSummaryStatus RowStatus
}
agentLagSummaryName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Name"
::= { agentLagSummaryConfigEntry 1 }
agentLagSummaryLagIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Agent Lag If Index"
::= { agentLagSummaryConfigEntry 2 }
agentLagSummaryFlushTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Flush Timer"
::= { agentLagSummaryConfigEntry 3 }
agentLagSummaryLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Link Trap"
::= { agentLagSummaryConfigEntry 4 }
agentLagSummaryAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Admin Mode"
::= { agentLagSummaryConfigEntry 5 }
agentLagSummaryStpMode OBJECT-TYPE
SYNTAX INTEGER {
dot1d(1),
fast(2),
off(3)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag STP Mode"
::= { agentLagSummaryConfigEntry 6 }
agentLagSummaryAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Add Port.
Note: agentPortType for the port to be added
must be full duplex and the same speed as
previously added port(s), if any."
::= { agentLagSummaryConfigEntry 7 }
agentLagSummaryDeletePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Delete Port"
::= { agentLagSummaryConfigEntry 8 }
agentLagSummaryPortsBitMask OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Member Ports in bit mask
representation"
::= { agentLagSummaryConfigEntry 9 }
agentLagSummaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Agent Lag Status.
active(1) - This Lag is enabled.
destroy(6) - Set to this value to remove the
Lag."
::= { agentLagSummaryConfigEntry 30 }
--*******************************************************************
-- agentLagDetailedConfigTable
--*******************************************************************
agentLagDetailedConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLagDetailedConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A detailed table of the switch's lag config
entries"
::= { agentLagConfigGroup 3 }
agentLagDetailedConfigEntry OBJECT-TYPE
SYNTAX AgentLagDetailedConfigEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Switch's lag config entry"
INDEX { agentLagDetailedLagIndex,
agentLagDetailedIfIndex }
::= { agentLagDetailedConfigTable 1 }
AgentLagDetailedConfigEntry ::= SEQUENCE {
agentLagDetailedLagIndex Integer32,
agentLagDetailedIfIndex Integer32,
agentLagDetailedPortSpeed OBJECT IDENTIFIER
}
agentLagDetailedLagIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Lag index"
::= { agentLagDetailedConfigEntry 1 }
agentLagDetailedIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Lag port index"
::= { agentLagDetailedConfigEntry 2 }
agentLagDetailedPortSpeed OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Lag port speed. See agentPortType for
description and list of valid values."
::= { agentLagDetailedConfigEntry 22 }
agentLagConfigMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The Lag Mode on the 4400 series controller. When
it is on, all the gigabit ports are bound to one
aggregated link."
::= { agentLagConfigGroup 4 }
--********************************************************************
-- agentNetworkConfigGroup
--********************************************************************
agentNetworkConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 3 }
agentNetworkIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's network ip address"
::= { agentNetworkConfigGroup 1 }
agentNetworkSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's network subnet mask"
::= { agentNetworkConfigGroup 2 }
agentNetworkDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's network default gateway"
::= { agentNetworkConfigGroup 3 }
agentNetworkBurnedInMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Burned-In MAC address"
::= { agentNetworkConfigGroup 4 }
agentNetworkConfigProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
bootp(2),
dhcp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's network config protocol"
::= { agentNetworkConfigGroup 7 }
agentNetworkWebMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's web access mode."
::= { agentNetworkConfigGroup 8 }
agentNetworkSecureWebMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If https is enable or not provided web mode is
enabled"
::= { agentNetworkConfigGroup 9 }
agentNetworkMulticastMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch's ethernet multicast support.
disable- multicast is disabled
multicast - Multicast is enabled.
unicast- Controller will convert multicast to
unicast packet."
::= { agentNetworkConfigGroup 10 }
agentNetworkDsPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's distribution port number."
::= { agentNetworkConfigGroup 11 }
agentNetworkUserIdleTimeout OBJECT-TYPE
SYNTAX Unsigned32(10..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the idle user timeout."
::= { agentNetworkConfigGroup 12 }
agentNetworkArpTimeout OBJECT-TYPE
SYNTAX Unsigned32(10..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the ARP entry timeout."
::= { agentNetworkConfigGroup 13 }
agentNetworkManagementVlan OBJECT-TYPE
SYNTAX Unsigned32(0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of the network management interface."
::= { agentNetworkConfigGroup 14 }
agentNetworkGvrpStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(0) }
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The state of GVRP operation on the Switch. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port.(Attribute No longer
supported)"
DEFVAL { enabled }
::= { agentNetworkConfigGroup 15 }
agentNetworkAllowMgmtViaWireless OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This states whether Management via wireless is
allowed or not."
::= { agentNetworkConfigGroup 16 }
agentNetworkBroadcastSsidMode OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mode when enabled allows WLAN SSIDs to be
broadcasted."
::= { agentNetworkConfigGroup 17 }
agentNetworkSecureWebPassword OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSL Certificate Password. This can be optionally
set while downloading SSL certificates of type
Web Admin and Web Authentication"
::= { agentNetworkConfigGroup 18 }
agentNetworkWebAdminCertType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of currently existing Web Admin Certificate
installed on the Switch. It could be 'Empty' if the
certificate is not present, 'Locally Generated' if
the certificate is locally generated or it could
have a name if it is downloaded externally."
::= { agentNetworkConfigGroup 19 }
agentNetworkWebAdminCertRegenerateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This command when set to 'activate' will regenerate
a Web Administration Certificate Locally that will
replace the existing certificate."
::= { agentNetworkConfigGroup 20 }
agentNetworkWebAuthCertType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of currently exisitng Web Authentication
Certificate installed on the Switch. It could be
'Empty' if the certificate is not present, 'Locally
Generated' if the certificate is locally generated or
it could have a name if it is downloaded externally."
::= { agentNetworkConfigGroup 21 }
agentNetworkWebAuthCertRegenerateCmdInvoke OBJECT-TYPE
SYNTAX INTEGER { default (0), activate (1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This command when set to 'activate' will regenerate a
Web Authentication Certificate Locally that will
replace the existing certificate."
::= { agentNetworkConfigGroup 22 }
agentNetworkPeerToPeerBlockingMode OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mobile Peer to Peer Blocking mode on the switch."
::= { agentNetworkConfigGroup 24 }
agentNetworkMulticastGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast group address for access points."
::= { agentNetworkConfigGroup 25 }
--********************************************************************
-- agentNeworkRouteTable
--********************************************************************
agentNetworkRouteConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentNetworkRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the switch's Network Route entries"
::= { agentNetworkConfigGroup 23 }
agentNetworkRouteConfigEntry OBJECT-TYPE
SYNTAX AgentNetworkRouteConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's Network Route entry"
INDEX {agentNetworkRouteIPAddress }
::= { agentNetworkRouteConfigTable 1 }
AgentNetworkRouteConfigEntry ::= SEQUENCE {
agentNetworkRouteIPAddress IpAddress,
agentNetworkRouteIPNetmask IpAddress,
agentNetworkRouteGateway IpAddress,
agentNetworkRouteStatus RowStatus
}
agentNetworkRouteIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Network Route IP Address."
::= { agentNetworkRouteConfigEntry 1 }
agentNetworkRouteIPNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Network Route IP Netmask."
::= { agentNetworkRouteConfigEntry 2 }
agentNetworkRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Network Route IP Gateway."
::= { agentNetworkRouteConfigEntry 3 }
agentNetworkRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Network Route Row Status."
::= { agentNetworkRouteConfigEntry 23 }
--********************************************************************
-- agentInterfaceConfigTable
--********************************************************************
agentInterfaceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentInterfaceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the switch's Interface Config entries
Typically, it will contain entries for Service
Port Interface, DS Port Interface and Virtual
Gateway Interface apart from other entries."
::= { agentConfigGroup 13 }
agentInterfaceConfigEntry OBJECT-TYPE
SYNTAX AgentInterfaceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's Interface Config entry"
INDEX { agentInterfaceName }
::= { agentInterfaceConfigTable 1 }
AgentInterfaceConfigEntry ::= SEQUENCE {
agentInterfaceName OCTET STRING,
agentInterfaceVlanId Integer32,
agentInterfaceType INTEGER,
agentInterfaceMacAddress MacAddress,
agentInterfaceIPAddress IpAddress,
agentInterfaceIPNetmask IpAddress,
agentInterfaceIPGateway IpAddress,
agentInterfacePortNo Integer32,
agentInterfaceActivePortNo Integer32,
agentInterfaceBackupPortNo Integer32,
agentInterfacePrimaryDhcpAddress IpAddress,
agentInterfaceSecondaryDhcpAddress IpAddress,
agentInterfaceDhcpProtocol INTEGER,
agentInterfaceDnsHostName DisplayString,
agentInterfaceAclName DisplayString,
agentInterfaceAPManagementFeature INTEGER,
agentInterfaceRowStatus RowStatus,
agentInterfaceVlanQuarantine TruthValue
}
agentInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interace Name. This values is 'management' for DS
port, 'service-port' for service port and 'virtual'
for virtual gateway. For other interfaces, the name
can be anything. These interfaces are already created
by default."
::= { agentInterfaceConfigEntry 1 }
agentInterfaceVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Vlan ID configured for the Interface."
DEFVAL{ 0 }
::= { agentInterfaceConfigEntry 2 }
agentInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
static(0),
dynamic(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's type. The static type is set for
the interfaces that are created by default on the
switch and these cannot be deleted. Any other
interface that is created is of type dynamic
which can be deleted."
::= { agentInterfaceConfigEntry 3 }
agentInterfaceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface MAC Address. This is only applicable in
case of management and service-port interfaces."
::= { agentInterfaceConfigEntry 4 }
agentInterfaceIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the interface."
::= { agentInterfaceConfigEntry 5 }
agentInterfaceIPNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Netmask of the interface. This is 0 for the
virtual interface."
::= { agentInterfaceConfigEntry 6 }
agentInterfaceIPGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Gateway of the interface. This is 0 for virtual
and service-port interface."
::= { agentInterfaceConfigEntry 7 }
agentInterfacePortNo OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A value 0 means the port is not set. The valid value
can be any one of the physical ports on the switch.
This is the primary port configured on the
interface."
DEFVAL{ 0 }
::= { agentInterfaceConfigEntry 8 }
agentInterfacePrimaryDhcpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Primary DHCP Server IP Address for the interface
This applies to the management interface and other
dynamic interfaces."
::= { agentInterfaceConfigEntry 9 }
agentInterfaceSecondaryDhcpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Secondary DHCP Server IP Address for the interface.
This applies to the management interface and other
dynamic interfaces."
::= { agentInterfaceConfigEntry 10 }
agentInterfaceDhcpProtocol OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface's DHCP protocol. This applies only
to the service port interface."
::= { agentInterfaceConfigEntry 11 }
agentInterfaceDnsHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DNS host name for the Virtual Interface.
This attribute is not valid for other
interfaces."
::= { agentInterfaceConfigEntry 12 }
agentInterfaceAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the Access Control List applied to the
interface. This attribute is applicable only to
the management interface and other dynamic
interfaces. If it is required to remove the ACL
name for an interface, it should be set to an
empty string."
::= { agentInterfaceConfigEntry 13 }
agentInterfaceAPManagementFeature OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When enabled, the dynamic interface can be used for AP
management. SNMP support for AP management through
dynamic interfaces has been introduced since '3.0.21.0'
release. Only applicable to dynamic interfaces in 4200
series. In static interfaces, 'disable' value 0
is returned. In 4000/3500 series of switches, 'disable'
value 0 is returned."
::= { agentInterfaceConfigEntry 14 }
agentInterfaceActivePortNo OBJECT-TYPE
SYNTAX Integer32(0..25)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the currently active port for this
interface."
DEFVAL{ 0 }
::= { agentInterfaceConfigEntry 15 }
agentInterfaceBackupPortNo OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This values is valid only for the 4200 series of
switches. The backup port is the port this interface
is moved to once the primary port fails. A value 0
means the port is not set. The valid value can be
any one of the physical ports on the 4200 switch."
DEFVAL{ 0 }
::= { agentInterfaceConfigEntry 16 }
agentInterfaceVlanQuarantine OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to configure the health of the
interface identified by agentInterfaceName.
A value of 'true' is used to indicate that this
particular interface is unhealthy. In this case,
the data packets of the clients, that are assigned
the VLAN Id corresponding to this interface, must
be tunneled to the Controller by the REAP AP.
A value of 'false' indicates that the VLAN configured
against the interface is healthy and that the REAP
AP can switch the clients of this VLAN locally rather
than tunneling them to the Controller. "
DEFVAL { false }
::= { agentInterfaceConfigEntry 17 }
agentInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface entry Row status."
::= { agentInterfaceConfigEntry 31 }
--********************************************************************
-- agentNtpConfigGroup - Configuration of Switch Network Time Protocol
--********************************************************************
agentNtpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 14 }
agentNtpPollingInterval OBJECT-TYPE
SYNTAX Integer32(3600..604800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network Time Protocol polling interval. Min value
is one hour and maximum is a week."
::= { agentNtpConfigGroup 1 }
--********************************************************************
-- agentNtpServerTable - Configuration of Network Time Protocol Server
--********************************************************************
agentNtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A summary table for switch's lag config entries"
::= { agentNtpConfigGroup 2 }
agentNtpServerEntry OBJECT-TYPE
SYNTAX AgentNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's NTP Server entry. Upto 4 entries may be
added."
INDEX { agentNtpServerIndex }
::= { agentNtpServerTable 1 }
AgentNtpServerEntry ::= SEQUENCE {
agentNtpServerIndex Integer32,
agentNtpServerAddress IpAddress,
agentNtpServerRowStatus RowStatus
}
agentNtpServerIndex OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"NTP Server priority index."
::= { agentNtpServerEntry 1 }
agentNtpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the NTP Server"
::= { agentNtpServerEntry 2 }
agentNtpServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"NTP server entry row status."
::= { agentNtpServerEntry 20 }
--********************************************************************
-- agentDhcpConfigGroup - Configuration of Switch DHCP Server and
-- its Scopes
--********************************************************************
agentDhcpConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 15 }
agentDhcpScopeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDhcpScopeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing the Scopes defined on the
switch's DHCP Server."
::= { agentDhcpConfigGroup 1 }
agentDhcpScopeEntry OBJECT-TYPE
SYNTAX AgentDhcpScopeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's DHCP Server Scope entry."
INDEX { agentDhcpScopeIndex }
::= { agentDhcpScopeTable 1 }
AgentDhcpScopeEntry ::= SEQUENCE {
agentDhcpScopeIndex Unsigned32,
agentDhcpScopeName DisplayString,
agentDhcpScopeLeaseTime Integer32,
agentDhcpScopeNetwork IpAddress,
agentDhcpScopeNetmask IpAddress,
agentDhcpScopePoolStartAddress IpAddress,
agentDhcpScopePoolEndAddress IpAddress,
agentDhcpScopeDefaultRouterAddress1 IpAddress,
agentDhcpScopeDefaultRouterAddress2 IpAddress,
agentDhcpScopeDefaultRouterAddress3 IpAddress,
agentDhcpScopeDnsDomainName DisplayString,
agentDhcpScopeDnsServerAddress1 IpAddress,
agentDhcpScopeDnsServerAddress2 IpAddress,
agentDhcpScopeDnsServerAddress3 IpAddress,
agentDhcpScopeNetbiosNameServerAddress1 IpAddress,
agentDhcpScopeNetbiosNameServerAddress2 IpAddress,
agentDhcpScopeNetbiosNameServerAddress3 IpAddress,
agentDhcpScopeState INTEGER,
agentDhcpScopeRowStatus RowStatus
}
agentDhcpScopeIndex OBJECT-TYPE
SYNTAX Unsigned32(0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP Scope Identifier Index."
::= { agentDhcpScopeEntry 1 }
agentDhcpScopeName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..79))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP Scope Name."
::= { agentDhcpScopeEntry 2 }
agentDhcpScopeLeaseTime OBJECT-TYPE
SYNTAX Integer32(120..8640000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP Scope Lease time in seconds."
::= { agentDhcpScopeEntry 3 }
agentDhcpScopeNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope Network. This is
the address which is used to determine the DHCP
scope a remote Switch is attaching to."
::= { agentDhcpScopeEntry 4 }
agentDhcpScopeNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Scope Netmask. This the subnet mask for
the address pool."
::= { agentDhcpScopeEntry 5 }
agentDhcpScopePoolStartAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Scope address pool start IP address."
::= { agentDhcpScopeEntry 6 }
agentDhcpScopePoolEndAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DHCP Scope address pool end IP address."
::= { agentDhcpScopeEntry 7 }
agentDhcpScopeDefaultRouterAddress1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's default Router
1."
::= { agentDhcpScopeEntry 8 }
agentDhcpScopeDefaultRouterAddress2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's default Router
2."
::= { agentDhcpScopeEntry 9 }
agentDhcpScopeDefaultRouterAddress3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's default Router
3."
::= { agentDhcpScopeEntry 10 }
agentDhcpScopeDnsDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..79))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DNS Domain name for the DHCP Scope."
::= { agentDhcpScopeEntry 11 }
agentDhcpScopeDnsServerAddress1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's DNS Server 1."
::= { agentDhcpScopeEntry 12 }
agentDhcpScopeDnsServerAddress2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's DNS Server 2."
::= { agentDhcpScopeEntry 13 }
agentDhcpScopeDnsServerAddress3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of the DHCP Scope's DNS Server 3."
::= { agentDhcpScopeEntry 14 }
agentDhcpScopeNetbiosNameServerAddress1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of DHCP Scope's Netbios Name Server
1."
::= { agentDhcpScopeEntry 15 }
agentDhcpScopeNetbiosNameServerAddress2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of DHCP Scope's Netbios Name Server
2."
::= { agentDhcpScopeEntry 16 }
agentDhcpScopeNetbiosNameServerAddress3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Address of DHCP Scope's Netbios Name Server
3."
::= { agentDhcpScopeEntry 17 }
agentDhcpScopeState OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"DHCP Scope's State."
::= { agentDhcpScopeEntry 18 }
agentDhcpScopeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dhcp Scope entry row status."
::= { agentDhcpScopeEntry 30 }
--********************************************************************
-- agentServicePortConfigGroup
-- (Interface of type service-port in agentInterfaceConfigTable
-- use is recommended instead of this group.)
--********************************************************************
agentServicePortConfigGroup OBJECT IDENTIFIER ::=
{ agentConfigGroup 4 }
agentServicePortIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The switch's Service Port IP address.
(Service-port interface use is recommended
instead
of this group)"
::= { agentServicePortConfigGroup 1 }
agentServicePortSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The switch's Service Port subnet mask.
(Service-port interface in
agentInterfaceConfigTable is recommended
instead
of this group)"
::= { agentServicePortConfigGroup 2 }
agentServicePortDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Not Supported for release 1.0. The switch's
Service Port default gateway. (Service-port
interface in agentInterfaceConfigTable is
recommended instead of this group)"
::= { agentServicePortConfigGroup 3 }
agentServicePortBurnedInMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The switch's Service Port Burned-In MAC address
(Service-port interface in
agentInterfaceConfigTable is recommended
instead
of this group)"
::= { agentServicePortConfigGroup 4 }
agentServicePortConfigProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
dhcp(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The switch's Service Port config protocol
(Service-port interface in
agentInterfaceConfigTable is recommended
instead
of this group)"
::= { agentServicePortConfigGroup 5 }
--********************************************************************
-- agentSnmpConfigGroup
--********************************************************************
agentSnmpConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 5}
agentSnmpTrapPortNumber OBJECT-TYPE
SYNTAX Unsigned32(1..65534)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snmp Trap Port Number"
::= { agentSnmpConfigGroup 1 }
agentSnmpVersion1Status OBJECT-TYPE
SYNTAX INTEGER{disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snmp Version 1 Status"
::= { agentSnmpConfigGroup 2 }
agentSnmpVersion2cStatus OBJECT-TYPE
SYNTAX INTEGER{disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snmp Version 2c Status"
::= { agentSnmpConfigGroup 3 }
--********************************************************************
-- agentSnmpCommunityConfigTable
--********************************************************************
agentSnmpCommunityConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSnmpCommunityConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the switch's SNMP community Config
entries"
::= { agentSnmpConfigGroup 5 }
agentSnmpCommunityConfigEntry OBJECT-TYPE
SYNTAX AgentSnmpCommunityConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's SNMP community Config entry"
INDEX {agentSnmpCommunityName }
::= { agentSnmpCommunityConfigTable 1 }
AgentSnmpCommunityConfigEntry ::= SEQUENCE {
agentSnmpCommunityName DisplayString,
agentSnmpCommunityIPAddress IpAddress,
agentSnmpCommunityIPMask IpAddress,
agentSnmpCommunityAccessMode INTEGER,
agentSnmpCommunityEnabled INTEGER,
agentSnmpCommunityStatus RowStatus
}
agentSnmpCommunityName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Community Name
This name identifies each SNMP community;
the name can be up to 16 characters, and it is
case-sensitive. Community names in the SNMP
community must be unique. If you make multiple
entries using the same community name, the first
entry is kept and processed and all duplicate
entries are ignored. "
::= { agentSnmpCommunityConfigEntry 1 }
agentSnmpCommunityIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Community IP Address
Client IP Address - This attribute is an IP
address (or portion thereof) from which this
device will accept SNMP packets with the
associated community. The requesting entity's IP
address is logical-ANDed with the Client IP Mask
and the result must match the Client IP Address.
Note: If the Client IP Mask is set to 0.0.0.0, a
Client IP Address of 0.0.0.0 matches all IP
addresses."
::= { agentSnmpCommunityConfigEntry 2 }
agentSnmpCommunityIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Community
IP Mask Client IP Mask - This attribute is a mask
to be logical-ANDed with the requesting entity's
IP address before comparison with the Client IP
Address. If the result matches with Client IP
Address then the address is an authenticated IP
address. For example, if the Client IP Address
is 9.47.128.0 and the corresponding Client IP
Mask is 255.255.255.0, a range of incoming IP
addresses would match, that is, the incoming IP
addresses could be a value in the following
range: 9.47.128.0 to 9.47.128.255. To have a
specific IP address be the only authenticated IP
address, set the Client IP Address to the
required IP address and set the Client IP Mask to
255.255.255.255."
::= { agentSnmpCommunityConfigEntry 3 }
agentSnmpCommunityAccessMode OBJECT-TYPE
SYNTAX INTEGER {
readOnly(1),
readWrite(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Community Access Mode
Access Mode - This value can be readOnly or
readWrite. A community with a read-only access
allows for switch information to be displayed.
A community with a readWrite access allows for
configuration changes to be made and for
information to be displayed. "
DEFVAL {readOnly}
::= { agentSnmpCommunityConfigEntry 4 }
agentSnmpCommunityEnabled OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If community is Enabled "
DEFVAL { no }
::= { agentSnmpCommunityConfigEntry 5 }
agentSnmpCommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Community Status.
active(1) - This community is active,
allowing SNMP manager
associated
with this community to manage
the switch according to its
access right.
notInService(2) - This community is not active;
no
SNMP requests using this
community will be accepted. In
this case the SNMP manager
associated with this community
cannot manage the switch until
the Status is changed back to
active(1).
config(3) - The community Status must be
set to this value in order to
configure it. When creating a
new community entry, initial
Status will be set to this
value.
destroy(4) - Set to this value to remove
the
community from the agent."
::= { agentSnmpCommunityConfigEntry 25 }
--********************************************************************
-- agentSnmpTrapReceiverConfigTable
--********************************************************************
agentSnmpTrapReceiverConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSnmpTrapReceiverConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trap messages are sent across a network to an SNMP
Network Manager. These messages alert the manager to
events occurring within the switch or on the network.
Up to six simultaneous trap receivers are supported."
::= { agentSnmpConfigGroup 6 }
agentSnmpTrapReceiverConfigEntry OBJECT-TYPE
SYNTAX AgentSnmpTrapReceiverConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's Snmp Trap Receiver Config entry"
INDEX { agentSnmpTrapReceiverName }
::= { agentSnmpTrapReceiverConfigTable 1 }
AgentSnmpTrapReceiverConfigEntry ::= SEQUENCE {
agentSnmpTrapReceiverName OCTET STRING,
agentSnmpTrapReceiverIPAddress IpAddress,
agentSnmpTrapReceiverEnabled INTEGER,
agentSnmpTrapReceiverStatus RowStatus
}
agentSnmpTrapReceiverName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The switch's Snmp Trap Receiver Name.
This is the name of the remote network manager.
the name can be up to 16 characters,
and is case-sensitive."
::= { agentSnmpTrapReceiverConfigEntry 1 }
agentSnmpTrapReceiverIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMP network Manager IP Address. The IP Address
traps will be sent to. Each IP address parameter
is four integer numbers. The numbers range from
0 to 255. After creation of entry IP Address
cannot be changed."
::= { agentSnmpTrapReceiverConfigEntry 2 }
agentSnmpTrapReceiverEnabled OBJECT-TYPE
SYNTAX INTEGER{no(0),yes(1)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag to enable the trap receiver. If
disabled, no traps are sent to this receiver's
IP Address. "
DEFVAL{ no }
::= { agentSnmpTrapReceiverConfigEntry 3 }
agentSnmpTrapReceiverStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create and delete instances
of this table.
The row, when created with the row status value
of 'createAndGo' or 'createAndWait' is moved to the
'active' state automatically by the agent and remains
in that state till the time the row is removed through
the 'destroy' option."
::= { agentSnmpTrapReceiverConfigEntry 23 }
--********************************************************************
-- agentSnmpTrapFlagsConfigGroup
--********************************************************************
agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER ::=
{ agentSnmpConfigGroup 7 }
agentSnmpAuthenticationTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Flag - Enable/Disable
authentication Flag."
::= { agentSnmpTrapFlagsConfigGroup 1 }
agentSnmpLinkUpDownTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link Up/Down Flag - Enable/Disable Link Up/Link
Down traps for the entire switch. When set to
Enable, the Link Up/Down traps will be sent only
if the Link Trap flag setting associated with
the port (Port Configuration Menu) is set to
Enable."
::= { agentSnmpTrapFlagsConfigGroup 2 }
agentSnmpMultipleUsersTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multiple Users Flag - Enable/Disable Multiple
User traps. When the value is set to Enable, a
Multiple User Trap is sent whenever someone logs
in to the terminal interface (EIA 232 or Telnet)
and there is already an existing terminal
interface session"
::= { agentSnmpTrapFlagsConfigGroup 3 }
agentSnmpSpanningTreeTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Spanning Tree Flag - This flag enables the
sending of new root traps and topology change
notification traps."
::= { agentSnmpTrapFlagsConfigGroup 4 }
agentSnmpBroadcastStormTrapFlag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Broadcast Storm Flag - This flag enables or
disables the broadcast storm trap. You must also
enable Broadcast Storm Recovery Mode
(see the Switch Configuration Menu). When this
value is set to Enable and Broadcast Storm
Recovery mode is set to Enable, the Broadcast
Storm Start/End traps are sent when the switch
enters and leaves Broadcast Storm Recovery."
::= { agentSnmpTrapFlagsConfigGroup 5 }
--********************************************************************
-- agentSnmpV3ConfigGroup
--********************************************************************
agentSnmpV3ConfigGroup OBJECT IDENTIFIER ::= {agentConfigGroup 6}
agentSnmpVersion3Status OBJECT-TYPE
SYNTAX INTEGER{disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Snmp Version 3 Status"
::= { agentSnmpV3ConfigGroup 1 }
--********************************************************************
-- agentSnmpV3UserConfigTable
--********************************************************************
agentSnmpV3UserConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSnmpV3UserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Config Table. Only creation and deletion of
users is supported. All individual updates are
not supported."
::= { agentSnmpV3ConfigGroup 2 }
agentSnmpV3UserConfigEntry OBJECT-TYPE
SYNTAX AgentSnmpV3UserConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Config Entry"
INDEX { agentSnmpV3UserName }
::= { agentSnmpV3UserConfigTable 1 }
AgentSnmpV3UserConfigEntry ::= SEQUENCE {
agentSnmpV3UserName OCTET STRING,
agentSnmpV3UserAccessMode INTEGER,
agentSnmpV3UserAuthenticationType INTEGER,
agentSnmpV3UserEncryptionType INTEGER,
agentSnmpV3UserAuthenticationPassword OCTET STRING,
agentSnmpV3UserEncryptionPassword OCTET STRING,
agentSnmpV3UserStatus RowStatus
}
agentSnmpV3UserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Agent User Name."
::= { agentSnmpV3UserConfigEntry 1 }
agentSnmpV3UserAccessMode OBJECT-TYPE
SYNTAX INTEGER {
readonly(1),
readwrite(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Agent User Access Mode"
::= { agentSnmpV3UserConfigEntry 2 }
agentSnmpV3UserAuthenticationType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
hmacmd5(2),
hmacsha(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMPv3 User Authentication
none(1) - no authentication used
hmacmd5(1) - Use HMAC-MD5 authentication
hmacsha(1) - Use HMAC-SHA authentication"
::= { agentSnmpV3UserConfigEntry 3 }
agentSnmpV3UserEncryptionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
des(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMPv3 User Encryption Must be set to none(1) if
agentSnmpV3UserAuthenticationType is set to
none(1). Setting this object will set the
encryption password to an empty string.
none(1) - no encryption used
des(1) - DES encryption used"
::= { agentSnmpV3UserConfigEntry 4 }
agentSnmpV3UserAuthenticationPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMPv3 User Encryption Password"
::= { agentSnmpV3UserConfigEntry 5 }
agentSnmpV3UserEncryptionPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMPv3 User Encryption Password"
::= { agentSnmpV3UserConfigEntry 6 }
agentSnmpV3UserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Agent User Status.
active(1) - This user account is active.
destroy(6) - Set to this value to remove this
user account."
::= { agentSnmpV3UserConfigEntry 26 }
--********************************************************************
-- agentSpanningTreePortTable
--********************************************************************
agentSpanningTreeConfigGroup OBJECT IDENTIFIER ::=
{ agentConfigGroup 7 }
agentSpanningTreeMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Spanning Tree Switch Status"
::= { agentSpanningTreeConfigGroup 1 }
--********************************************************************
-- agentSwitchConfigGroup
--********************************************************************
agentSwitchConfigGroup OBJECT IDENTIFIER ::= { agentConfigGroup 8
}
agentSwitchAddressAgingTimeoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The switch's address aging timeout table"
::= { agentSwitchConfigGroup 4 }
agentSwitchAddressAgingTimeoutEntry OBJECT-TYPE
SYNTAX AgentSwitchAddressAgingTimeoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aging information about a specific Filtering
Database."
INDEX { dot1qFdbId }
::= { agentSwitchAddressAgingTimeoutTable 1 }
AgentSwitchAddressAgingTimeoutEntry ::=
SEQUENCE {
agentSwitchAddressAgingTimeout
Integer32
}
agentSwitchAddressAgingTimeout OBJECT-TYPE
SYNTAX Integer32 (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FDB entry's address aging timeout(in
seconds)"
DEFVAL { 300 }
::= { agentSwitchAddressAgingTimeoutEntry 10 }
agentSwitchBroadcastControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch config broadcast allows you to enable
or disable broadcast storm recovery mode. When
you specify Enable for Broadcast Storm Recovery
and the broadcast traffic on any Ethernet port
exceeds 20 percent of the link speed, the switch
blocks (discards) the broadcast traffic until
the broadcast traffic returns to 10 percent or
less.Upper limit for 10M link is 20% and lower
limit is 10%. For 100M link Upper limit is 5%
and lower limit is 2%"
::= { agentSwitchConfigGroup 2 }
agentSwitchDot3FlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config switchconfig flowcontrol allows you to
enable or disable 802.3x flow control for the
switch. This value applies to only full-duplex
mode ports. "
::= { agentSwitchConfigGroup 3 }
agentSwitchLwappTransportMode OBJECT-TYPE
SYNTAX INTEGER {
layer2(1),
layer3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LWAPP transport mode decides if the switch
is operating in the Layer2 or Layer3 mode.
The switch needs to be rebooted for the mode
change to take effect."
::= { agentSwitchConfigGroup 5 }
--********************************************************************
-- agentTransferConfigGroup
--********************************************************************
agentTransferConfigGroup OBJECT IDENTIFIER ::=
{ agentConfigGroup 9 }
--*******************************************************************
-- agentTransferUploadGroup
--*******************************************************************
agentTransferUploadGroup OBJECT IDENTIFIER ::=
{ agentTransferConfigGroup 1 }
agentTransferUploadMode OBJECT-TYPE
SYNTAX INTEGER {
tftp(1),
xmodem(2),
ymodem(3),
zmodem(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload mode configures the mode to use
when uploading from the switch. The mode is
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
only when the file transfer is initiated by the
serial EIA 232 port."
::= { agentTransferUploadGroup 1 }
agentTransferUploadServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload tftpserverip configures the IP
address of the server where the file will be
uploaded. It is valid only when the Transfer
Mode is TFTP. The address is 4 integer bytes
ranging from 0 to 255."
::= { agentTransferUploadGroup 2 }
agentTransferUploadPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload tftppath configures the
directory
path where the file is to be uploaded to. The
switch remembers the last file path used."
::= { agentTransferUploadGroup 3 }
agentTransferUploadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload tftpfilename configures the
file name for the file being uploaded from the
switch. It can be up to 32 alphanumeric
characters. The switch remembers the last file
name used. File path can be appended to the file
name if the string is less than 17 characters.
Otherwise, the File Path field will need to be
used and the File Name will be appended to the
File Path as is. An example would be File Path
set to c:\tftp\code\ and File Name set to
e1r1v1.opr.
Note: File Name, File Path, and TFTP Server IP
Address are applicable only if the Transfer Mode
is TFTP."
::= { agentTransferUploadGroup 4 }
agentTransferUploadDataType OBJECT-TYPE
SYNTAX INTEGER {
config(2),
errorlog(3),
systemtrace(4),
traplog(5),
crashfile(6),
signatures(7),
unknown(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload datatype configures the type of
file to upload from the switch.
The types for upload are:
- Configuration File
- Error log
- System trace
- Trap log
- Crash File
"
::= { agentTransferUploadGroup 5 }
agentTransferUploadStart OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer upload start will start an upload
transfer. The agentTransferUploadMode object
must not be set to xmodem(2), ymodem(3), or
zmodem(4) to initiate a transfer via SNMP."
::= { agentTransferUploadGroup 6 }
agentTransferUploadStatus OBJECT-TYPE
SYNTAX INTEGER {
notInitiated(1),
transferStarting(2),
errorStarting(3),
wrongFileType(4),
updatingConfig(5),
invalidConfigFile(6),
writingToFlash(7),
failureWritingToFlash(8),
checkingCRC(9),
failedCRC(10),
unknownDirection(11),
transferSuccessful(12),
transferFailed(13),
unknown(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of an upload
transfer."
::= { agentTransferUploadGroup 7 }
agentTransferConfigurationFileEncryption OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration file can be encrypted before
tftp upload from the switch and then decrypted
before downloading to the switch when this
option is enabled."
::= { agentTransferConfigGroup 3 }
agentTransferConfigurationFileEncryptionKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the key to be used when encrypting the
configuration file while upload from the switch
or while decrypting the file after download to
the switch."
::= { agentTransferConfigGroup 4 }
--********************************************************************
-- agentTransferDownloadGroup
--********************************************************************
agentTransferDownloadGroup OBJECT IDENTIFIER ::=
{ agentTransferConfigGroup 2 }
agentTransferDownloadMode OBJECT-TYPE
SYNTAX INTEGER {
tftp(1),
xmodem(2),
ymodem(3),
zmodem(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download mode configures the mode to
use when downloading to the switch. The mode is
either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid
only when the file transfer is initiated by the
serial EIA 232 port."
::= { agentTransferDownloadGroup 1 }
agentTransferDownloadServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download tftpserverip configures the IP
address of the server where the file is located.
It is valid only when the Transfer Mode is TFTP.
The address is 4 integer bytes ranging from 0 to
255."
::= { agentTransferDownloadGroup 2 }
agentTransferDownloadPath OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download tftppath configures the
directory path where the file is located. The
switch remembers the last file path used."
::= { agentTransferDownloadGroup 3 }
agentTransferDownloadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download tftpfilename configures the
file name for the file being downloaded to the
switch. It can be up to 32 alphanumeric
characters. The switch remembers the last file
name used. File path can be appended to the
file name if the string is less than 33
characters. Otherwise, the File Path field will
need to be used and the File Name will be
appended to the File Path as is. An example
would be File Path set to c:\tftp\code\
and File Name set to e1r1v1.opr. Note: File
Name, File Path, and TFTP Server IP Address are
applicable only if the Transfer Mode is TFTP."
::= { agentTransferDownloadGroup 4 }
agentTransferDownloadDataType OBJECT-TYPE
SYNTAX INTEGER {
code(2),
config(3),
webauthcert(4),
webadmincert(5),
signatures(6),
customWebAuth(7),
unknown(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download datatype configures the type
of file to downloaded to the switch.
The types for download are:
- Code
- Configuration
- Certificates
- Signatures
- customWebauth- custom webauth tar ball"
::= { agentTransferDownloadGroup 5 }
agentTransferDownloadStart OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transfer download start will start an download
transfer. The agentTransferDownloadMode object
must not be set to xmodem(2), ymodem(3), or
zmodem(4) to initiate a transfer via SNMP."
::= { agentTransferDownloadGroup 6 }
agentTransferDownloadStatus OBJECT-TYPE
SYNTAX INTEGER {
notInitiated(1),
transferStarting(2),
errorStarting(3),
wrongFileType(4),
updatingConfig(5),
invalidConfigFile(6),
writingToFlash(7),
failureWritingToFlash(8),
checkingCRC(9),
failedCRC(10),
unknownDirection(11),
transferSuccessful(12),
transferFailed(13),
bootBreakOff(14),
invalidTarFile(15),
unknown(99)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of an download
transfer."
::= { agentTransferDownloadGroup 7 }
agentTransferDownloadTftpMaxRetries OBJECT-TYPE
SYNTAX Unsigned32(1..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of retries to be allowed for a
TFTP message packet."
DEFVAL{ 10 }
::= { agentTransferDownloadGroup 8 }
agentTransferDownloadTftpTimeout OBJECT-TYPE
SYNTAX Unsigned32(1..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout in seconds for a TFTP message packet."
DEFVAL{ 6 }
::= { agentTransferDownloadGroup 9 }
--********************************************************************
-- agentDot3adAggPortTable
--********************************************************************
agentDot3adAggPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentDot3adAggPortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This table provides 802.3ad link aggregation
information for each physical port that is not
available through the standard MIB."
::= { agentConfigGroup 11 }
agentDot3adAggPortEntry OBJECT-TYPE
SYNTAX AgentDot3adAggPortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information about a table entry. The
agentDot3adAggPort identifies the external
interface number of the port."
INDEX { agentDot3adAggPort }
::= { agentDot3adAggPortTable 1 }
AgentDot3adAggPortEntry ::= SEQUENCE {
agentDot3adAggPort Integer32,
agentDot3adAggPortLACPMode INTEGER
}
agentDot3adAggPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"ifIndex of this physical port"
::= { agentDot3adAggPortEntry 1 }
agentDot3adAggPortLACPMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Enable/disable 802.3ad LACP on this port"
::= { agentDot3adAggPortEntry 21 }
--********************************************************************
-- agentPortConfigTable
--
--********************************************************************
agentPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of the switch's physical port config
entries"
::= { agentConfigGroup 12 }
agentPortConfigEntry OBJECT-TYPE
SYNTAX AgentPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch's physical port config entry"
INDEX { agentPortDot1dBasePort }
::= { agentPortConfigTable 1 }
AgentPortConfigEntry ::= SEQUENCE {
agentPortDot1dBasePort Integer32,
agentPortIfIndex Integer32,
agentPortIanaType IANAifType,
agentPortSTPMode INTEGER,
agentPortSTPState INTEGER,
agentPortAdminMode INTEGER,
agentPortPhysicalMode INTEGER,
agentPortPhysicalStatus INTEGER,
agentPortLinkTrapMode INTEGER,
agentPortClearStats INTEGER,
agentPortDefaultType OBJECT IDENTIFIER,
agentPortType OBJECT IDENTIFIER,
agentPortAutoNegAdminStatus INTEGER,
agentPortDot3FlowControlMode INTEGER,
agentPortPowerMode INTEGER,
agentPortGvrpStatus INTEGER,
agentPortGarpJoinTime Unsigned32,
agentPortGarpLeaveTime Unsigned32,
agentPortGarpLeaveAllTime Unsigned32,
agentPortMirrorMode INTEGER,
agentPortMulticastApplianceMode INTEGER,
agentPortOperationalStatus INTEGER
}
agentPortDot1dBasePort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of this port."
::= { agentPortConfigEntry 1 }
agentPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Port IfIndex"
::= { agentPortConfigEntry 2 }
agentPortIanaType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Port Type"
::= { agentPortConfigEntry 3 }
agentPortSTPMode OBJECT-TYPE
SYNTAX INTEGER {
dot1d(1),
fast(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast
spanning tree mode
off, indicates the STP mode is turned off for a
particular port"
::= { agentPortConfigEntry 4 }
agentPortSTPState OBJECT-TYPE
SYNTAX INTEGER {
blocking(1),
listening(2),
learning(3),
forwarding(4),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Port Spanning Tree Protocol State"
::= { agentPortConfigEntry 5 }
agentPortAdminMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Port Admin Mode"
::= { agentPortConfigEntry 6 }
agentPortPhysicalMode OBJECT-TYPE
SYNTAX INTEGER {
autoNegotiate(1),
half10(2),
full10(3),
half100(4),
full100(5),
full1000sx(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Port Speed Mode. This is the
configured physical mode.This object is
read-only for gigabit ports"
::= { agentPortConfigEntry 7 }
agentPortPhysicalStatus OBJECT-TYPE
SYNTAX INTEGER {
autonegotiate(1),
half10(2),
full10(3),
half100(4),
full100(5),
full1000sx(8),
unknown(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch's Port Physical Speed Status.This
is the current actual speed."
::= { agentPortConfigEntry 8 }
agentPortLinkTrapMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, link up and link down traps will be
sent for this port."
::= { agentPortConfigEntry 9 }
agentPortClearStats OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear stats for this port only"
::= { agentPortConfigEntry 10 }
agentPortDefaultType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the default administrative
port type, to be used in conjunction with the
operational port type denoted by agentPortType.
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
This object represents the administratively-
configured
type of the MAU. If auto-negotiation is not enabled
or is not implemented for this MAU, the value of
this object determines the operational type of the
MAU. In this case, a set to this object will force
the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for
this MAU, the operational type of the MAU is
determined by auto-negotiation, and the value of
this object denotes the type to which the MAU will
automatically revert if/when auto-negotiation is
later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD"
REFERENCE "RFC 2668"
::= { agentPortConfigEntry 11 }
agentPortType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the port type.
An initial set of MAU types are defined in RFC 2668.
The assignment of OBJECT IDENTIFIERs to new types of
MAUs is managed by the IANA.
If the MAU type is unknown, the object identifier
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownMauType is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER must
be able to generate and recognize this value.
This object represents the operational type of the
MAU, as determined by either (1) the result of the
auto-negotiation function or (2) if auto-negotiation
is not enabled or is not implemented for this MAU,
by the value of the object qbEnetDefaultType, or (3)
for the GigE card a value determined by the GBIC
connected to the card. In case (2), a set to the
object qbEnetPortDefaultType will force the MAU into
the new operating mode.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD"
REFERENCE "RFC 2668"
::= { agentPortConfigEntry 12 }
agentPortAutoNegAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the administration status of
auto negotiation for this port."
::= { agentPortConfigEntry 13 }
agentPortDot3FlowControlMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config flowcontrol allows you to enable or
disable 802.3x flow control for this port. This
value applies to only full-duplex mode ports."
::= { agentPortConfigEntry 14 }
agentPortPowerMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable the port's Power over ethernet. This doesn't
apply to appliances that have no POE controller."
::= { agentPortConfigEntry 15 }
agentPortGvrpStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port.(Attribute no longer
supported)"
DEFVAL { enabled }
::= { agentPortConfigEntry 16 }
agentPortGarpJoinTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The GARP Join time, in centiseconds.(Attribute no longer
supported)"
DEFVAL { 20 }
::= { agentPortConfigEntry 17 }
agentPortGarpLeaveTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The GARP Leave time, in centiseconds.(Attribute no
longer supported)"
DEFVAL { 60 }
::= { agentPortConfigEntry 18 }
agentPortGarpLeaveAllTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The GARP LeaveAll time, in centiseconds.(Attribute no
longer supported)"
DEFVAL { 1000 }
::= { agentPortConfigEntry 19 }
agentPortMirrorMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch's Port Mirror Mode. If enabled, then
this is the port that the packets are mirrored
to."
::= { agentPortConfigEntry 20 }
agentPortMulticastApplianceMode OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Port Multicast Appliance Mode. If enabled,
then this port allows multicast streams through
it. At a time, a maximum of four ports including
the gigabit ethernet port can have this mode
enabled on them. This is to limit the number of
multicast streams allowed through the switch
at a given time."
::= { agentPortConfigEntry 21 }
agentPortOperationalStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the port."
::= { agentPortConfigEntry 40 }
--********************************************************************
-- agentSystemGroup
--********************************************************************
agentSaveConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"save config to NVRAM"
::= { agentSystemGroup 1 }
agentClearConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear config to factory defaults"
::= { agentSystemGroup 2 }
agentClearLags OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear lag configuration"
::= { agentSystemGroup 3 }
agentClearLoginSessions OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"close all telnet sessions"
::= { agentSystemGroup 4 }
agentClearPortStats OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear all port statistics"
::= { agentSystemGroup 6 }
agentClearSwitchStats OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear all switch statistics"
::= { agentSystemGroup 7 }
agentClearTrapLog OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear trap log"
::= { agentSystemGroup 8 }
agentResetSystem OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reset the switch"
::= { agentSystemGroup 10 }
--********************************************************************
-- portStatsTable
-- Enterprise portion of Ethernet Statistics Group
-- This augments the etherStatsTable of RMON group.
--********************************************************************
portStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of additional thernet statistics entries."
::= { stats 1 }
portStatsEntry OBJECT-TYPE
SYNTAX PortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of statistics kept for a particular Ethernet
interface."
INDEX { portStatsIndex }
::= { portStatsTable 1 }
PortStatsEntry ::= SEQUENCE {
portStatsIndex Integer32,
portStatsPktsTx64Octets Counter32,
portStatsPktsTx65to127Octets Counter32,
portStatsPktsTx128to255Octets Counter32,
portStatsPktsTx256to511Octets Counter32,
portStatsPktsTx512to1023Octets Counter32,
portStatsPktsTx1024to1518Octets Counter32,
portStatsPktsRx1519to1530Octets Counter32,
portStatsPktsTx1519to1530Octets Counter32,
portStatsPktsTxOversizeOctets Counter32
}
portStatsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object uniquely identifies
this portStatsEntry."
::= { portStatsEntry 1 }
portStatsPktsTx64Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were 64 octets in length
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 2 }
portStatsPktsTx65to127Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 3 }
portStatsPktsTx128to255Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 4 }
portStatsPktsTx256to511Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 5 }
portStatsPktsTx512to1023Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 6 }
portStatsPktsTx1024to1518Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 7 }
portStatsPktsRx1519to1530Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) received that were between
1519 and 1530 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 8 }
portStatsPktsTx1519to1530Octets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were between
1519 and 1530 octets in length inclusive
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 9 }
portStatsPktsTxOversizeOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets (including bad
packets) transmitted that were more than
1530 octets in length.
(excluding framing bits but including FCS octets)."
::= { portStatsEntry 30 }
--********************************************************************
-- switchingTraps
--********************************************************************
multipleUsersTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Multiple Users Log Trap."
::= { switchingTraps 1 }
broadcastStormStartTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Broadcast Storm Start Log Trap."
::= { switchingTraps 2 }
broadcastStormEndTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Broadcast Storm End Log Trap."
::= { switchingTraps 3 }
linkFailureTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"trapMgrLinkFailureLogTrap."
::= { switchingTraps 4 }
vlanRequestFailureTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"Vlan Request Failure Log Trap"
::= { switchingTraps 5 }
vlanDeleteLastTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"Last Vlan Delete Log Trap"
::= { switchingTraps 6 }
vlanDefaultCfgFailureTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"Default Vlan Config Failure Log Trap"
::= { switchingTraps 7 }
vlanRestoreFailureTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"Vlan Restore Failure Log Trap"
::= { switchingTraps 8 }
fanFailureTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Fan Failure Log Trap."
::= { switchingTraps 9 }
stpInstanceNewRootTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"STP Instance New Root Trap"
::= { switchingTraps 10 }
stpInstanceTopologyChangeTrap NOTIFICATION-TYPE
OBJECTS {
dot1qVlanIndex
}
STATUS current
DESCRIPTION
"STP Instance Topology Change Trap"
::= { switchingTraps 11 }
powerSupplyStatusChangeTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Power Supply Status Change Trap"
::= { switchingTraps 12 }
--********************************************************************
--* Compliance statements
--********************************************************************
bsnSwitchingCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the bsnSwitching module"
MODULE
MANDATORY-GROUPS { bsnSwitchingAgentInfoGroup,
bsnSwitchingAgentConfigGroup,
bsnSwitchingAgentSystemGroup,
bsnSwitchingAgentStatsGroup }
::= { bsnSwitchingCompliances 1 }
--********************************************************************
--* Units of conformance
--********************************************************************
bsnSwitchingAgentInfoGroup OBJECT-GROUP
OBJECTS {
agentInventorySysDescription,
agentInventoryMachineType,
agentInventoryMachineModel,
agentInventorySerialNumber,
agentInventoryMaintenanceLevel,
agentInventoryBurnedInMacAddress,
agentInventoryOperatingSystem,
agentInventoryManufacturerName,
agentInventoryProductName,
agentInventoryProductVersion,
agentInventoryIsGigECardPresent,
agentInventoryIsCryptoCardPresent,
agentInventoryIsForeignAPSupported,
agentInventoryMaxNumberOfAPsSupported,
agentInventoryIsCryptoCard2Present,
agentInventoryFipsModeEnabled,
agentTrapLogTotal,
agentTrapLogTotalSinceLastViewed,
agentTrapLogIndex,
agentTrapLogSystemTime,
agentTrapLogTrap,
agentRadioUpDownTrapCount,
agentApAssociateDisassociateTrapCount,
agentApLoadProfileFailTrapCount,
agentApNoiseProfileFailTrapCount,
agentApInterferenceProfileFailTrapCount,
agentApCoverageProfileFailTrapCount,
agentSwitchInfoLwappTransportMode,
agentSwitchInfoPowerSupply1Present,
agentSwitchInfoPowerSupply1Operational,
agentSwitchInfoPowerSupply2Present,
agentSwitchInfoPowerSupply2Operational,
agentCurrentCPUUtilization,
agentTotalMemory,
agentFreeMemory,
agentWcpDeviceName,
agentWcpSlotNumber,
agentWcpPortNumber,
agentWcpPeerPortNumber,
agentWcpPeerIpAddress,
agentWcpControllerTableChecksum,
agentWcpControllerInfoSlotNumber,
agentWcpControllerInfoPortNumber,
agentWcpControllerInfoIpAddress
}
STATUS current
DESCRIPTION
"This collection of objects provide switching information."
::= { bsnSwitchingGroups 1}
bsnSwitchingAgentConfigGroup OBJECT-GROUP
OBJECTS {
agentLoginSessionIndex,
agentLoginSessionUserName,
agentLoginSessionIPAddress,
agentLoginSessionConnectionType,
agentLoginSessionIdleTime,
agentLoginSessionSessionTime,
agentLoginSessionStatus,
agentTelnetLoginTimeout,
agentTelnetMaxSessions,
agentTelnetAllowNewMode,
agentSSHAllowNewMode,
agentSerialTimeout,
agentSerialBaudrate,
agentSerialCharacterSize,
agentSerialHWFlowControlMode,
agentSerialStopBits,
agentSerialParityType,
agentNetworkIPAddress,
agentNetworkSubnetMask,
agentNetworkDefaultGateway,
agentNetworkBurnedInMacAddress,
agentNetworkConfigProtocol,
agentNetworkWebMode,
agentNetworkSecureWebMode,
agentNetworkMulticastMode,
agentNetworkDsPortNumber,
agentNetworkUserIdleTimeout,
agentNetworkArpTimeout,
agentNetworkManagementVlan,
agentNetworkAllowMgmtViaWireless,
agentNetworkBroadcastSsidMode,
agentNetworkSecureWebPassword,
agentNetworkWebAdminCertType,
agentNetworkWebAuthCertRegenerateCmdInvoke,
agentNetworkWebAdminCertRegenerateCmdInvoke,
agentNetworkWebAuthCertType,
agentNetworkRouteIPAddress,
agentNetworkRouteIPNetmask,
agentNetworkRouteGateway,
agentNetworkRouteStatus,
agentNetworkPeerToPeerBlockingMode,
agentNetworkMulticastGroupAddress,
agentInterfaceName,
agentInterfaceVlanId,
agentInterfaceType,
agentInterfaceMacAddress,
agentInterfaceIPAddress,
agentInterfaceIPNetmask,
agentInterfaceIPGateway,
agentInterfacePortNo,
agentInterfacePrimaryDhcpAddress,
agentInterfaceSecondaryDhcpAddress,
agentInterfaceDhcpProtocol,
agentInterfaceDnsHostName,
agentInterfaceAclName,
agentInterfaceAPManagementFeature,
agentInterfaceActivePortNo,
agentInterfaceBackupPortNo,
agentInterfaceVlanQuarantine,
agentInterfaceRowStatus,
agentNtpPollingInterval,
agentNtpServerIndex,
agentNtpServerAddress,
agentNtpServerRowStatus,
agentDhcpScopeIndex,
agentDhcpScopeName,
agentDhcpScopeLeaseTime,
agentDhcpScopeNetwork,
agentDhcpScopeNetmask,
agentDhcpScopePoolStartAddress,
agentDhcpScopePoolEndAddress,
agentDhcpScopeDefaultRouterAddress1,
agentDhcpScopeDefaultRouterAddress2,
agentDhcpScopeDefaultRouterAddress3,
agentDhcpScopeDnsDomainName,
agentDhcpScopeDnsServerAddress1,
agentDhcpScopeDnsServerAddress2,
agentDhcpScopeDnsServerAddress3,
agentDhcpScopeNetbiosNameServerAddress1,
agentDhcpScopeNetbiosNameServerAddress2,
agentDhcpScopeNetbiosNameServerAddress3,
agentDhcpScopeState,
agentDhcpScopeRowStatus,
agentSnmpTrapPortNumber,
agentSnmpVersion1Status,
agentSnmpVersion2cStatus,
agentSnmpCommunityName,
agentSnmpCommunityIPAddress,
agentSnmpCommunityIPMask,
agentSnmpCommunityAccessMode,
agentSnmpCommunityEnabled,
agentSnmpCommunityStatus,
agentSnmpTrapReceiverName,
agentSnmpTrapReceiverIPAddress,
agentSnmpTrapReceiverEnabled,
agentSnmpTrapReceiverStatus,
agentSnmpAuthenticationTrapFlag,
agentSnmpLinkUpDownTrapFlag,
agentSnmpMultipleUsersTrapFlag,
agentSnmpSpanningTreeTrapFlag,
agentSnmpVersion3Status,
agentSnmpV3UserName,
agentSnmpV3UserAccessMode,
agentSnmpV3UserAuthenticationType,
agentSnmpV3UserEncryptionType,
agentSnmpV3UserAuthenticationPassword,
agentSnmpV3UserEncryptionPassword,
agentSnmpV3UserStatus,
agentSpanningTreeMode,
agentSwitchAddressAgingTimeout,
agentSwitchBroadcastControlMode,
agentSwitchDot3FlowControlMode,
agentSwitchLwappTransportMode,
agentTransferUploadMode,
agentTransferUploadServerIP,
agentTransferUploadPath,
agentTransferUploadFilename,
agentTransferUploadDataType,
agentTransferUploadStart,
agentTransferUploadStatus,
agentTransferConfigurationFileEncryption,
agentTransferConfigurationFileEncryptionKey,
agentTransferDownloadMode,
agentTransferDownloadServerIP,
agentTransferDownloadPath,
agentTransferDownloadFilename,
agentTransferDownloadDataType,
agentTransferDownloadStart,
agentTransferDownloadStatus,
agentTransferDownloadTftpMaxRetries,
agentTransferDownloadTftpTimeout,
agentPortDot1dBasePort,
agentPortIfIndex,
agentPortIanaType,
agentPortSTPMode,
agentPortSTPState,
agentPortAdminMode,
agentPortPhysicalMode,
agentPortPhysicalStatus,
agentPortLinkTrapMode,
agentPortClearStats,
agentPortDefaultType,
agentPortType,
agentPortAutoNegAdminStatus,
agentPortDot3FlowControlMode,
agentPortPowerMode,
agentPortMirrorMode,
agentPortMulticastApplianceMode,
agentPortOperationalStatus
}
STATUS current
DESCRIPTION
"This collection of objects provide switching configuration
information."
::= { bsnSwitchingGroups 2}
bsnSwitchingAgentSystemGroup OBJECT-GROUP
OBJECTS {
agentSaveConfig,
agentClearConfig,
agentClearLags,
agentClearLoginSessions,
agentClearPortStats,
agentClearSwitchStats,
agentClearTrapLog,
agentResetSystem
}
STATUS current
DESCRIPTION
"This collection of objects provide switching system
information and config."
::= { bsnSwitchingGroups 3 }
bsnSwitchingAgentStatsGroup OBJECT-GROUP
OBJECTS {
portStatsIndex,
portStatsPktsTx64Octets,
portStatsPktsTx65to127Octets,
portStatsPktsTx128to255Octets,
portStatsPktsTx256to511Octets,
portStatsPktsTx512to1023Octets,
portStatsPktsTx1024to1518Octets,
portStatsPktsRx1519to1530Octets,
portStatsPktsTx1519to1530Octets,
portStatsPktsTxOversizeOctets
}
STATUS current
DESCRIPTION
"This collection of objects provide switching statistics."
::= { bsnSwitchingGroups 4 }
bsnSwitchingObsGroup OBJECT-GROUP
OBJECTS {
agentLagConfigCreate,
agentLagSummaryName,
agentLagSummaryLagIndex,
agentLagSummaryLinkTrap,
agentLagSummaryAdminMode,
agentLagSummaryStpMode,
agentLagSummaryAddPort,
agentLagSummaryDeletePort,
agentLagSummaryPortsBitMask,
agentLagSummaryStatus,
agentLagDetailedLagIndex,
agentLagDetailedIfIndex,
agentLagDetailedPortSpeed,
agentLagConfigMode,
agentServicePortIPAddress,
agentServicePortSubnetMask,
agentServicePortBurnedInMacAddress,
agentServicePortConfigProtocol,
agentSnmpBroadcastStormTrapFlag,
agentDot3adAggPort,
agentDot3adAggPortLACPMode,
agentNetworkGvrpStatus,
agentPortGvrpStatus,
agentPortGarpJoinTime,
agentPortGarpLeaveTime,
agentPortGarpLeaveAllTime,
agentLagSummaryFlushTimer,
agentServicePortDefaultGateway
}
STATUS obsolete
DESCRIPTION
"This collection of objects are obsoleted in bsnSwitching
module."
::= { bsnSwitchingGroups 5 }
bsnSwitchingTrap NOTIFICATION-GROUP
NOTIFICATIONS {
multipleUsersTrap,
broadcastStormStartTrap,
broadcastStormEndTrap,
linkFailureTrap,
vlanRequestFailureTrap,
vlanDeleteLastTrap,
vlanDefaultCfgFailureTrap,
vlanRestoreFailureTrap,
fanFailureTrap,
stpInstanceNewRootTrap,
stpInstanceTopologyChangeTrap,
powerSupplyStatusChangeTrap
}
STATUS current
DESCRIPTION
"This collection of objects provides switching related
notification."
::= { bsnSwitchingGroups 6 }
--********************************************************************
--* End of units of conformance
--********************************************************************
END
Reference in New Issue Copy Permalink