david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-ENTITY-EXT-MIB

1446 lines
49 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-ENTITY-EXT-MIB.my
--
-- Cisco Extension to ENTITY-MIB(RFC2737)
--
-- April 2001, A S Kiran Koushik
-- May 2004, Arul Mozhi
-- Mar 2015, Neha Jagtap
--
-- Copyright (c) 2001-2018 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ENTITY-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
entPhysicalIndex,
entPhysicalEntry,
entPhysicalDescr,
entPhysicalName,
entPhysicalContainedIn
FROM ENTITY-MIB
Unsigned64
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoEntityExtMIB MODULE-IDENTITY
LAST-UPDATED "201804040000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This MIB is an extension of the ENTITY-MIB
specified in RFC2737.
This MIB module contains Cisco-defined extensions
to the entityPhysicalTable to represent information
related to entities of class module(entPhysicalClass
= 'module') which have a Processor.
A processor module is defined as a physical entity
that has a CPU, RAM and NVRAM so that
it can independently
- load a bootable image
- save configuration.
This module is the entry point for external
applications like SNMP Manager, CLI, FTP etc.
Line card is an interface card with at least a
Processor and RAM. This might be referred to as
Service Module in some cisco products.
A configuration register is a 16 bit
software register.
The configuration register is mainly used to
check for instructions on where to find the Cisco
Operating System software.
Some other functions of configuration register are:
- To select a boot source and default boot filename.
- To enable or disable the Break function.
- To control broadcast addresses.
- To set the console terminal baud rate.
- To load operating software from Flash memory.
- To allow us to manually boot the system using the
boot command at the bootstrap program prompt.
Booting is the process of initializing the
hardware and starting the Operating System."
REVISION "201804040000Z"
DESCRIPTION
"Added the following groups OBJECT-GROUP
ceExtNVRAMOverflowGroup
ceExtHCNVRAMGroup"
REVISION "201504170000Z"
DESCRIPTION
"Added ceExtUSBModemTable,
ceExtUSBModemPlugInNotif, ceExtUSBModemPlugOutNotif,
ceExtEntUsbModemNotifEnable."
REVISION "201409120000Z"
DESCRIPTION
"Changed the description ceExtEntDoorOpenNotif to
include ceExtEntDoorOpenNotif instead
of ceExtEntDoorCloseNotif."
REVISION "201403270000Z"
DESCRIPTION
"Changed the Max Access of ceExtEntDoorNotifEnable from
read-only to read-write."
REVISION "201308060000Z"
DESCRIPTION
"Added following object to ciscoEntityExtMIBNotifications
ceExtBreakOutPortInserted
ceExtBreakOutPortRemoved
Added following object to ceExtNotificationControlObjects
ceExtBreakOutPortNotifEnable
Added the following new groups to ciscoEntityExtMIBGroups
ceExtBreakOutPortNotifGroup
ceExtBreakOutPortNotifControlGroup.
Added a new compliance ciscoEntityExtMIBComplianceRev5 which
deprecates ciscoEntityExtMIBComplianceRev4
A port can be configured to act as multiple interfaces.
Ex: One Hundred GigE port can act as 10 TenGigE interface
Breakout is the term that can be used to define this behaviour.
Alternatively slice term is also used.
When a breakout config is applied on the interface, the base
interface will be replaced with multiple breakout interfaces.
Reference to the base interface will be removed from the system
and breakout interface will be made available. Vice versa will
happen when breakout config will be removed from the system."
REVISION "201308050000Z"
DESCRIPTION
"Added following new objects to ciscoEntityExtMIBNotifications.
ceExtEntDoorCloseNotif
ceExtEntDoorOpenNotif
Added following new groups to ciscoEntityExtMIBGroups.
ceExtNotificationControlObjects.
Added following new objects to ceExtNotificationControlObjects
ceExtEntDoorNotifEnable.
Added the following new groups to ciscoEntityExtMIBGroups
ceExtEntDoorNotifGroup
ceExtEntDoorNotifControlGroup.
Added a new compliance ciscoEntityExtMIBComplianceRev4 which
deprecates ciscoEntityExtMIBComplianceRev3."
REVISION "200811240000Z"
DESCRIPTION
"Added following new objects to ceExtPhysicalProcessorTable.
ceExtProcessorRamOverflow and ceExtHCProcessorRam
Added following new groups to ciscoEntityExtMIBGroups.
ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup.
Added a new compliance ciscoEntityExtMIBComplianceRev3 which
deprecates ciscoEntityExtMIBComplianceRev2."
REVISION "200407060000Z"
DESCRIPTION
"Added a new table object 'ceExtEntPhysicalTable' ."
REVISION "200403030000Z"
DESCRIPTION
"Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC."
REVISION "200401260000Z"
DESCRIPTION
"Added new enum to ceExtEntityLEDType."
REVISION "200308240000Z"
DESCRIPTION
"Added ceExtEntityLEDTable. Added ceExtKickstartImageList to
ceExtConfigRegTable.
Added new group ciscoEntityExtLEDGroup.
Added group ceExtSysBootImageListGroupRev1."
REVISION "200105170000Z"
DESCRIPTION
"Corrected the description for the TC
ConfigRegisterValue."
REVISION "200104050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 195 }
ciscoEntityExtMIBObjects OBJECT IDENTIFIER
::= { ciscoEntityExtMIB 1 }
-- textual conventions
ConfigRegisterValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x"
STATUS current
DESCRIPTION
"An Integer containing the value of config register.
The definition of individual bits from right to left
when set are as follows:
00 to
03 Boot Fields(Refer below for
explanation).
04 to
05 Not Used.
06 Causes system software to ignore the
contents of NVRAM.
07 Enable the original equipment
manufacturer (OEM) bit.
08 The Break function is disabled.
09 Not used.
10 Broadcast based on 0.0.0.0 IP address.
11 to
12 Defines the console baud rate as below:
Bits 11 & 12 unset: 9600 baud(default),
Bit 11 set & 12 unset: 4800 baud,
Bit 11 unset & 12 set: 1200 baud,
Bit 11 set & 12 set: 2400 baud
13 Boots default Flash software if
network boot fails.
14 IP broadcasts do not have network
numbers.
15 Enables diagnostic messages and ignores
the contents of NVRAM.
Meanings for different values of Boot Fields
(Bits 00 to 03) are explained below:
Value(in hex) Description
------------ -----------
00 On powerup or reload, the system
remains at the ROM monitor prompt
(rommon>), awaiting a user command
to boot the system manually by means
of the rommon boot command.
01 On powerup or reload, the system loads
the system image found in onboard
Flash memory.
02 to On powerup or reload, the system loads
0F the system image specified by
ceExtSysBootImageList.
It tries to boot the
image in the order in which
the image names are entered in
ceExtSysBootImageList. If
it cannot boot any image in the
ceExtSysBootImageList, it
stays in ROM monitor mode."
SYNTAX OCTET STRING (SIZE (2))
BootImageList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This contains a list of boot images,
each separated by the ';' (semi-colon) character.
The following provides a syntax for parsing a single
boot image list item.
<device>:[filename] | <URL>
<device> can be (but not limited to):
flash, bootflash, slot0, rom, C
The transfer protocol used in the <URL>
can be (but not limited to):
tftp, ftp, rcp, mop.
The following is en example containing two boot image
names:
disk0:c7100-ik2s-mz;tftp://dirt/c7100-ik2s-mz
If the filename is not specified, then the
first file on the <device> will be used.
If the last two characters in the returned value
are ';+' this indicates that additional boot image
items are configured on the device but can not
be returned because the maximum string size limitation
would be exceeded.
For example:
disk0:image1;disk0:image2;+"
SYNTAX OCTET STRING (SIZE (0..255))
-- ceExtPhysicalProcessorTable
ceExtPhysicalProcessorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeExtPhysicalProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ceExtPhysicalProcessorTable extends
the ENTITY-MIB entPhysicalTable for modules
(Non FRUs(Field Replacable Units) or FRUs)."
REFERENCE "RFC2737: Section 2.12.1"
::= { ciscoEntityExtMIBObjects 1 }
ceExtPhysicalProcessorEntry OBJECT-TYPE
SYNTAX CeExtPhysicalProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A ceExtPhysicalProcessorTable entry extends
a corresponding entPhysicalTable entry of class
module(entPhysicalClass = 'module').
A processor module or line card which
has a processor will have an entry in
this table.
A processor module or line card having
multiple processors and is a SMP(Symmetric
multi processor) system will have only
one entry corresponding to all the processors
since the resources defined below are shared.
A processor module or line card having
multiple processors and is not an SMP system
would register the processors as separate entities.
Entries are created by the agent at the system power-up
or module insertion.
Entries are removed when the module is reset or removed."
INDEX { entPhysicalIndex }
::= { ceExtPhysicalProcessorTable 1 }
CeExtPhysicalProcessorEntry ::= SEQUENCE {
ceExtProcessorRam Unsigned32,
ceExtNVRAMSize Unsigned32,
ceExtNVRAMUsed Unsigned32,
ceExtProcessorRamOverflow Unsigned32,
ceExtHCProcessorRam Unsigned64,
ceExtNVRAMSizeOverflow Unsigned32,
ceExtHCNVRAMSize Unsigned64,
ceExtNVRAMUsedOverflow Unsigned32,
ceExtHCNVRAMUsed Unsigned64
}
ceExtProcessorRam OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes of RAM available on the
Processor."
::= { ceExtPhysicalProcessorEntry 1 }
ceExtNVRAMSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes of NVRAM in the entity.
A value of 0 for this object means the entity
does not support NVRAM or NVRAM information
is not available."
::= { ceExtPhysicalProcessorEntry 2 }
ceExtNVRAMUsed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes of NVRAM in use. This object
is irrelevant if ceExtNVRAMSize is 0."
::= { ceExtPhysicalProcessorEntry 3 }
ceExtProcessorRamOverflow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of ceExtProcessorRam.
This object needs to be supported only if the available RAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0."
::= { ceExtPhysicalProcessorEntry 4 }
ceExtHCProcessorRam OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of bytes of RAM
available on the Processor. This object is a 64-bit version
of ceExtProcessorRam."
::= { ceExtPhysicalProcessorEntry 5 }
ceExtNVRAMSizeOverflow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of ceExtNVRAMSize.
This object needs to be supported only if the available NVRAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0."
::= { ceExtPhysicalProcessorEntry 6 }
ceExtHCNVRAMSize OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of bytes of NVRAM
available on the Processor. This object is a 64-bit version
of ceExtNVRAMSize."
::= { ceExtPhysicalProcessorEntry 7 }
ceExtNVRAMUsedOverflow OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of ceExtNVRAMUsed.
This object needs to be supported only if the used NVRAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0."
::= { ceExtPhysicalProcessorEntry 8 }
ceExtHCNVRAMUsed OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of bytes of NVRAM used
on the Processor. This object is a 64-bit version of
ceExtHCNVRAMUsed."
::= { ceExtPhysicalProcessorEntry 9 }
ceExtConfigRegTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeExtConfigRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ceExtConfigRegTable extends
the ENTITY-MIB entPhysicalTable."
REFERENCE "RFC2737: Section 2.12.1"
::= { ciscoEntityExtMIBObjects 2 }
ceExtConfigRegEntry OBJECT-TYPE
SYNTAX CeExtConfigRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A ceExtConfigRegTable entry extends
a corresponding entPhysicalTable entry of class
module which has a configuration register.
Entries are created by the agent at the system power-up
or module insertion.
Entries are removed when the module is reset or
removed."
INDEX { entPhysicalIndex }
::= { ceExtConfigRegTable 1 }
CeExtConfigRegEntry ::= SEQUENCE {
ceExtConfigRegister ConfigRegisterValue,
ceExtConfigRegNext ConfigRegisterValue,
ceExtSysBootImageList BootImageList,
ceExtKickstartImageList BootImageList
}
ceExtConfigRegister OBJECT-TYPE
SYNTAX ConfigRegisterValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of configuration register with which
the processor module booted."
::= { ceExtConfigRegEntry 1 }
ceExtConfigRegNext OBJECT-TYPE
SYNTAX ConfigRegisterValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of configuration register in the
processor module at next reboot. Just after
the reboot this has the same value as
ceExtConfigRegister."
::= { ceExtConfigRegEntry 2 }
ceExtSysBootImageList OBJECT-TYPE
SYNTAX BootImageList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of system boot images which
can be used for booting."
DEFVAL { "" }
::= { ceExtConfigRegEntry 3 }
ceExtKickstartImageList OBJECT-TYPE
SYNTAX BootImageList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The list of system kickstart images which
can be used for booting."
DEFVAL { "" }
::= { ceExtConfigRegEntry 4 }
-- ceExtEntityLEDTable
ceExtEntityLEDTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeExtEntityLEDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information of LED on an entity."
::= { ciscoEntityExtMIBObjects 3 }
ceExtEntityLEDEntry OBJECT-TYPE
SYNTAX CeExtEntityLEDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ceExtEntityLEDTable,
containing information about an LED on an entity, identified by
entPhysicalIndex."
INDEX {
entPhysicalIndex,
ceExtEntityLEDType
}
::= { ceExtEntityLEDTable 1 }
CeExtEntityLEDEntry ::= SEQUENCE {
ceExtEntityLEDType INTEGER,
ceExtEntityLEDColor INTEGER
}
ceExtEntityLEDType OBJECT-TYPE
SYNTAX INTEGER {
status(1),
system(2),
active(3),
power(4),
battery(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of LED on this entity.
'status' - indicates the entity status.
'system' - indicates the overall system status.
'active' - the redundancy status of a module, for e.g.
supervisor module.
'power' - indicates sufficient power availability for all
modules.
'battery'- indicates the battery status."
REFERENCE
"Cisco MDS 9500 Series Hardware Installation Guide,
Product Overview."
::= { ceExtEntityLEDEntry 1 }
ceExtEntityLEDColor OBJECT-TYPE
SYNTAX INTEGER {
off(1),
green(2),
amber(3),
red(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The color of the LED."
REFERENCE
"Cisco MDS 9500 Series Multilayer Switches, Product
Overview."
::= { ceExtEntityLEDEntry 2 }
-- ceExtEntityPhysicalTable
ceExtEntPhysicalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeExtEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains additional information about
a particular physical entity.
This table augments the 'entPhysicalTable' of
the ENTITY-MIB."
REFERENCE "RFC2737: Section 2.12.1"
::= { ciscoEntityExtMIBObjects 4 }
ceExtEntPhysicalEntry OBJECT-TYPE
SYNTAX CeExtEntPhysicalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the 'ceExtEntPhysicalTable',
containing additional information about a physical entity,
identified by 'entPhysicalIndex'."
AUGMENTS { entPhysicalEntry }
::= { ceExtEntPhysicalTable 1 }
CeExtEntPhysicalEntry ::= SEQUENCE {
ceEntPhysicalSecondSerialNum SnmpAdminString
}
ceEntPhysicalSecondSerialNum OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the vendor-specific second
serial number string for the physical entity.
The first serial number string of the physical
entity is represented in the value of corresponding
instance of the 'entPhysicalSerialNum' object.
On the first instantiation of an physical entity, the value
of this object is the correct vendor-assigned second
serial number, if this information is available to the agent.
If the second serial number is unknown or non-existent, then
the value of this object will be a zero-length string instead.
Note that implementations which can correctly identify the
second serial numbers of all installed physical entities do
not need to provide write access to this object.
Agents which cannot provide non-volatile storage for the
second serial number strings are not required to implement
write access for this object.
Not every physical component will have a serial number, or
even need one. Physical entities for which the associated
value of the entPhysicalIsFRU object is equal to 'false(2)'
(e.g., the repeater ports within a repeater module), do not
need their own unique serial number. An agent does not have
to provide write access for such entities, and may return a
zero-length string.
If write access is implemented for an instance of
'ceEntPhysicalSecondSerialNum', and a value is written into
the instance, the agent must retain the supplied value in the
'ceEntPhysicalSecondSerialNum' instance associated with the
same physical entity for as long as that entity remains
instantiated. This includes instantiations across all re-
initializations/reboots of the network management system,
including those which result in a change of the physical
entity's entPhysicalIndex value."
DEFVAL { "" }
::= { ceExtEntPhysicalEntry 1 }
ceExtNotificationControlObjects OBJECT IDENTIFIER
::= { ciscoEntityExtMIBObjects 5 }
ceExtEntDoorNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
ceExtEntDoorCloseNotif and ceExtEntDoorOpenNotif
notifications as follows:
'true(1)' - the generation of ceExtEntDoorCloseNotif
and ceExtEntDoorOpenNotif
notifications are enabled.
'false(2)' - the generation of ceExtEntDoorCloseNotif
and ceExtEntDoorOpenNotif
notifications are disabled."
DEFVAL { false }
::= { ceExtNotificationControlObjects 1 }
ceExtEntBreakOutPortNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object controls the generation of
ceExtBreakOutPortInserted and
ceExtBreakOutPortRemoved as follows:
'true(1)' - the generation of ceExtBreakOutPortInserted
and ceExtBreakOutPortRemoved
notifications is enabled.
'false(2)' - the generation of ceExtBreakOutPortInserted
and ceExtBreakOutPortRemoved
notifications is disabled."
DEFVAL { false }
::= { ceExtNotificationControlObjects 2 }
ceExtEntUsbModemNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the generation of
ceExtUSBModemPlugInNotif and
ceExtUSBModemPlugOutNotif as follows:
'true(1)' - the generation of ceExtUSBModemPlugInNotif
and ceExtUSBModemPlugOutNotif
notifications is enabled.
'false(2)' - the generation of ceExtUSBModemPlugOutNotif
and ceExtUSBModemPlugOutNotif
notifications is disabled."
DEFVAL { false }
::= { ceExtNotificationControlObjects 3 }
-- ceExtUSBModemTable
ceExtUSBModemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeExtUSBModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information of USB MODEMs on an entity."
::= { ciscoEntityExtMIBObjects 6 }
ceExtUSBModemEntry OBJECT-TYPE
SYNTAX CeExtUSBModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ceExtUSBModemTable,
containing information about an USB MODEM on an entity,
identified by entPhysicalIndex."
INDEX { entPhysicalIndex }
::= { ceExtUSBModemTable 1 }
CeExtUSBModemEntry ::= SEQUENCE {
ceExtUSBModemIMEI SnmpAdminString,
ceExtUSBModemIMSI SnmpAdminString,
ceExtUSBModemServiceProvider SnmpAdminString,
ceExtUSBModemSignalStrength SnmpAdminString
}
ceExtUSBModemIMEI OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The International Mobile Equipment Identifier (IMEI) of the
USB-MODEM"
REFERENCE "RFC 6155"
::= { ceExtUSBModemEntry 1 }
ceExtUSBModemIMSI OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The International Mobile Subscriber Identifier(IMSI) -
for a GSM USB MODEM."
REFERENCE "RFC 4186"
::= { ceExtUSBModemEntry 2 }
ceExtUSBModemServiceProvider OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Provider name for a USB MODEM."
::= { ceExtUSBModemEntry 3 }
ceExtUSBModemSignalStrength OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signal strength of the USB MODEM."
::= { ceExtUSBModemEntry 4 }
-- Notifications
ceExtMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoEntityExtMIB 2 }
ciscoEntityExtMIBNotifications OBJECT IDENTIFIER
::= { ceExtMIBNotificationPrefix 0 }
ceExtEntDoorCloseNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
entPhysicalName
}
STATUS current
DESCRIPTION
"A ceExtEntDoorCloseNotif is generated if the door of an entity
has been closed."
::= { ciscoEntityExtMIBNotifications 1 }
ceExtEntDoorOpenNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
entPhysicalName
}
STATUS current
DESCRIPTION
"A ceExtEntDoorOpenNotif is generated if the door of an entity
has been opened."
::= { ciscoEntityExtMIBNotifications 2 }
ceExtBreakOutPortInserted NOTIFICATION-TYPE
OBJECTS {
entPhysicalContainedIn,
entPhysicalName
}
STATUS current
DESCRIPTION
"The ceExtBreakOutPortInserted notification indicates
that a Breakout port was inserted. The varbind for
this notification indicates the entPhysicalIndex of
the inserted Breakout port, and the entPhysicalIndex
of the BreakOut Port module that contains this port."
::= { ciscoEntityExtMIBNotifications 3 }
ceExtBreakOutPortRemoved NOTIFICATION-TYPE
OBJECTS {
entPhysicalContainedIn,
entPhysicalName
}
STATUS current
DESCRIPTION
"The ceExtBreakOutPortRemoved notification indicates
that a Breakout Port was removed. The varbind for this
notification indicates the entPhysicalIndex of the
removed Breakout port, and the entPhysicalIndex
of the BreakOut Port module that contains this port."
::= { ciscoEntityExtMIBNotifications 4 }
ceExtUSBModemPlugInNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalContainedIn,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"The ceExtUSBModemPlugInNotif notification indicates that
a USB MODEM was inserted. The varbind for this notification
indicates the entPhysicalDescr of the inserted USB MODEM,
and the entPhysicalIndex of the USB MODEM's container."
::= { ciscoEntityExtMIBNotifications 5 }
ceExtUSBModemPlugOutNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalContainedIn,
entPhysicalDescr
}
STATUS current
DESCRIPTION
"The ceExtUSBModemPlugOutNotif notification indicates that
a USB MODEM was removed. The varbind for this notification
indicates the entPhysicalDescr of the removed USB MODEM,
and the entPhysicalIndex of the USB MODEM's container."
::= { ciscoEntityExtMIBNotifications 6 }
-- conformance information
ciscoEntityExtMIBConformance OBJECT IDENTIFIER
::= { ciscoEntityExtMIB 3 }
ciscoEntityExtMIBCompliances OBJECT IDENTIFIER
::= { ciscoEntityExtMIBConformance 1 }
ciscoEntityExtMIBGroups OBJECT IDENTIFIER
::= { ciscoEntityExtMIBConformance 2 }
-- compliance statements
ciscoEntityExtMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an optional group
containing objects providing information about
configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
::= { ciscoEntityExtMIBCompliances 1 }
ciscoEntityExtMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an optional group
containing objects providing information about
configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object
which provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
::= { ciscoEntityExtMIBCompliances 2 }
ciscoEntityExtMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an optional group
containing objects providing information about
configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object
which provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
GROUP ciscoExtEntityPhysicalGroup
DESCRIPTION
"This group is an optional group containing an object
which provides additional information about the
physical entity."
::= { ciscoEntityExtMIBCompliances 3 }
ciscoEntityExtMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an optional group
containing objects providing information about
configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object
which provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object
which provides information about the system boot images."
GROUP ciscoExtEntityPhysicalGroup
DESCRIPTION
"This group is an optional group containing an object
which provides additional information about the
physical entity."
GROUP ceExtPhyProcessorOverflowGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtPhyProcessorHCGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
::= { ciscoEntityExtMIBCompliances 4 }
ciscoEntityExtMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an
optional group containing objects providing
information about configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object which
provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoExtEntityPhysicalGroup
DESCRIPTION
"This group is an optional group containing an object which
provides additional information about the physical entity."
GROUP ceExtPhyProcessorOverflowGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtPhyProcessorHCGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtEntDoorNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
GROUP ceExtEntDoorNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
OBJECT ceExtConfigRegNext
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceExtSysBootImageList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceExtKickstartImageList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceEntPhysicalSecondSerialNum
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceExtEntDoorNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoEntityExtMIBCompliances 5 }
ciscoEntityExtMIBComplianceRev5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an
optional group containing objects providing
information about configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object which
provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoExtEntityPhysicalGroup
DESCRIPTION
"This group is an optional group containing an object which
provides additional information about the physical entity."
GROUP ceExtPhyProcessorOverflowGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtPhyProcessorHCGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtEntDoorNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
GROUP ceExtEntDoorNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
GROUP ceExtBreakOutPortNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support Breakout
port notifications."
GROUP ceExtBreakOutPortNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support Breakout
port notifications."
OBJECT ceExtEntBreakOutPortNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoEntityExtMIBCompliances 6 }
ciscoEntityExtMIBComplianceRev6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance for SNMP Entities which support modules
with CPU, NVRAM and configuration register."
MODULE -- this module
MANDATORY-GROUPS { ceExtPhysicalProcessorGroup }
GROUP ciscoEntityExtConfigRegGroup
DESCRIPTION
"The ciscoEntityExtConfigRegGroup is an
optional group containing objects providing
information about configuration register."
GROUP ceExtSysBootImageListGroup
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoEntityExtLEDGroup
DESCRIPTION
"This group is an optional group containing an object which
provides LED information."
GROUP ceExtSysBootImageListGroupRev1
DESCRIPTION
"This group is an optional group containing an object which
provides information about the system boot images."
GROUP ciscoExtEntityPhysicalGroup
DESCRIPTION
"This group is an optional group containing an object which
provides additional information about the physical entity."
GROUP ceExtPhyProcessorOverflowGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtPhyProcessorHCGroup
DESCRIPTION
"This group is an optional group for the physical entities which
support 32-bit operating system."
GROUP ceExtEntDoorNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
GROUP ceExtEntDoorNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support entity door
open/close notifications."
GROUP ceExtBreakOutPortNotifGroup
DESCRIPTION
"This group is mandatory for platforms which support Breakout
port notifications."
GROUP ceExtBreakOutPortNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support Breakout
port notifications."
GROUP ceExtUSBModemGroup
DESCRIPTION
"This group is mandatory for platforms which support
USB Modem management."
GROUP ceExtUsbModemNotificationsGroup
DESCRIPTION
"This group is mandatory for platforms which support
USB Modem management."
GROUP ceExtUsbModemNotifControlGroup
DESCRIPTION
"This group is mandatory for platforms which support
USB Modem management."
OBJECT ceExtEntBreakOutPortNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceExtEntUsbModemNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoEntityExtMIBCompliances 7 }
-- units of conformance
ceExtPhysicalProcessorGroup OBJECT-GROUP
OBJECTS {
ceExtProcessorRam,
ceExtNVRAMSize,
ceExtNVRAMUsed
}
STATUS current
DESCRIPTION
"The collection of objects which give information about
the Processor RAM and NVRAM."
::= { ciscoEntityExtMIBGroups 1 }
ciscoEntityExtConfigRegGroup OBJECT-GROUP
OBJECTS {
ceExtConfigRegister,
ceExtConfigRegNext
}
STATUS current
DESCRIPTION
"The collection of objects which give information about
configuration register.
Implementation of this group is optional."
::= { ciscoEntityExtMIBGroups 2 }
ceExtSysBootImageListGroup OBJECT-GROUP
OBJECTS { ceExtSysBootImageList }
STATUS current
DESCRIPTION
"A group containing an object providing information
about the system boot images.
Implementation of this group is optional."
::= { ciscoEntityExtMIBGroups 3 }
ciscoEntityExtLEDGroup OBJECT-GROUP
OBJECTS { ceExtEntityLEDColor }
STATUS current
DESCRIPTION
"A collection of objects for giving led information."
::= { ciscoEntityExtMIBGroups 4 }
ceExtSysBootImageListGroupRev1 OBJECT-GROUP
OBJECTS { ceExtKickstartImageList }
STATUS current
DESCRIPTION
"A group containing an object providing information
about the system boot images.
Implementation of this group is optional."
::= { ciscoEntityExtMIBGroups 5 }
ciscoExtEntityPhysicalGroup OBJECT-GROUP
OBJECTS { ceEntPhysicalSecondSerialNum }
STATUS current
DESCRIPTION
"The collection of objects for providing additional
information about the physical entity.
Implementation of this group is optional."
::= { ciscoEntityExtMIBGroups 6 }
ceExtPhyProcessorOverflowGroup OBJECT-GROUP
OBJECTS { ceExtProcessorRamOverflow }
STATUS current
DESCRIPTION
"The collection of Overflow (upper 32-bit) objects which
provides information about physical processor, when the entity
runs on 64-bit Operating System (OS). This group is optional for
the entities which run on 32-bit OS."
::= { ciscoEntityExtMIBGroups 7 }
ceExtPhyProcessorHCGroup OBJECT-GROUP
OBJECTS { ceExtHCProcessorRam }
STATUS current
DESCRIPTION
"The collection of High Capacity (HC) objects which provides
information about physical processor, when the entity runs on
64-bit Operating System (OS). This group is optional for the
entities which run on 32-bit OS."
::= { ciscoEntityExtMIBGroups 8 }
ceExtEntDoorNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ceExtEntDoorCloseNotif,
ceExtEntDoorOpenNotif
}
STATUS current
DESCRIPTION
"A collection of objects providing the notification
information for door entitites."
::= { ciscoEntityExtMIBGroups 9 }
ceExtEntDoorNotifControlGroup OBJECT-GROUP
OBJECTS { ceExtEntDoorNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects providing control for entity door
notifications."
::= { ciscoEntityExtMIBGroups 10 }
ceExtBreakOutPortNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ceExtBreakOutPortInserted,
ceExtBreakOutPortRemoved
}
STATUS current
DESCRIPTION
"A collection of objects providing the notification
information for supporting Breakout port feature."
::= { ciscoEntityExtMIBGroups 11 }
ceExtBreakOutPortNotifControlGroup OBJECT-GROUP
OBJECTS { ceExtEntBreakOutPortNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects providing control for Breakout
Port notifications."
::= { ciscoEntityExtMIBGroups 12 }
ceExtUSBModemGroup OBJECT-GROUP
OBJECTS {
ceExtUSBModemIMEI,
ceExtUSBModemIMSI,
ceExtUSBModemServiceProvider,
ceExtUSBModemSignalStrength
}
STATUS current
DESCRIPTION
"A collection of objects for giving USB MODEM
config information."
::= { ciscoEntityExtMIBGroups 13 }
ceExtUsbModemNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ceExtUSBModemPlugInNotif,
ceExtUSBModemPlugOutNotif
}
STATUS current
DESCRIPTION
"A collection of notifications for USB MODEM removal and
insertion."
::= { ciscoEntityExtMIBGroups 14 }
ceExtUsbModemNotifControlGroup OBJECT-GROUP
OBJECTS { ceExtEntUsbModemNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects providing control for USB
MODEM notifications."
::= { ciscoEntityExtMIBGroups 15 }
ceExtNVRAMOverflowGroup OBJECT-GROUP
OBJECTS {
ceExtNVRAMSizeOverflow,
ceExtNVRAMUsedOverflow
}
STATUS current
DESCRIPTION
"The collection of objects providing Overflow (upper 32-bit) objects
for processor NVRAM information."
::= { ciscoEntityExtMIBGroups 16 }
ceExtHCNVRAMGroup OBJECT-GROUP
OBJECTS {
ceExtHCNVRAMSize,
ceExtHCNVRAMUsed
}
STATUS current
DESCRIPTION
"The collection of objects providing High Capacity (HC) objects
for processor NVRAM information."
::= { ciscoEntityExtMIBGroups 17 }
END
Reference in New Issue Copy Permalink