david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-LAG-MIB

1107 lines
36 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-LAG-MIB.my: Cisco LAG MIB
--
-- October 2001, Liwei Lue
--
-- Copyright (c) 2001-2003, 2004, 2006, 2008-2010, 2014 by cisco
-- Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-LAG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
dot3adAggPortEntry,
dot3adAggPortListEntry
FROM IEEE8023-LAG-MIB
CiscoInterfaceIndexList
FROM CISCO-TC
ifIndex
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoLagMIB MODULE-IDENTITY
LAST-UPDATED "201401140000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-etherchan@cisco.com
cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"Cisco Link Aggregation module for managing IEEE Std
802.3ad.
This MIB provides Link Aggregation information that are
either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)
or specific to Cisco products."
REVISION "201401140000Z"
DESCRIPTION
"Added clagAggPortListInterfaceIndexGroup."
REVISION "201010200000Z"
DESCRIPTION
"Added new enum values vlanIp(5) and ipPort(6) to
ClagDistributionProtocol textual convention."
REVISION "200911190000Z"
DESCRIPTION
"Added clagAggRateGroup, clagAggChannelIfLacpGroup,
clagAggChannelIfHashDistMethodGroup, clagAggChannelIfMinLinkGroup
and clagAggHashDistGlobalGroup."
REVISION "200801080000Z"
DESCRIPTION
"Modified the description of clagAggPortListPorts."
REVISION "200606210000Z"
DESCRIPTION
"Added clagAggMaxAggregatorsGroup and modified the
description of clagAggPortListPorts."
REVISION "200406110000Z"
DESCRIPTION
"Added clagAggPortListTable."
REVISION "200212130000Z"
DESCRIPTION
"Added a new value vlanIpPort(4) in TEXTUAL-CONVENTION
ClagDistributionProtocol.
Added a new object clagAggDistributionMplsProtocol."
REVISION "200201020000Z"
DESCRIPTION
"Modified Description of clagAggDistributionProtocol."
REVISION "200110230000Z"
DESCRIPTION
"Initial version of this MIB module.
Support Distribution configuration for LACP, Aggregation
protocol control, and Administrative status for LACP."
::= { ciscoMgmt 225 }
clagMIBObjects OBJECT IDENTIFIER
::= { ciscoLagMIB 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
ClagDistributionProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the supported load balancing
algorithms used on the port channel interface to distribute
outgoing data frames among its component interaces, such
as IP address.
ip(1) IP address
mac(2) MAC address
port(3) port number
vlanIpPort(4) vlan number, IP address and
port number
vlanIp(5) VLAN number and IP address
ipPort(6) IP address and port number"
SYNTAX INTEGER {
ip(1),
mac(2),
port(3),
vlanIpPort(4),
vlanIp(5),
ipPort(6)
}
ClagDistributionAddressMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the supported load
balancing address modes to distribute traffic
across multiple links. The address mode can be
source, destination, or both used on this port
channel interface to distribute outgoing data frames
among its component interfaces.
source(1) Source address.
destination(2) Destination address.
both(3) both, Source and Destination."
SYNTAX INTEGER {
source(1),
destination(2),
both(3)
}
ClagDistributionMplsProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the supported load balancing
algorithms used on the port channel interface to distribute
outgoing MPLS (Multi-Protocol Label Switching) data
frames among its component interfaces, such as
MPLS label.
label(1) MPLS label
labelIp(2) MPLS label or IP address"
SYNTAX INTEGER {
label(1),
labelIp(2)
}
ClagAggregationProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the supported aggregation
protocols.
lacp(1) Link Aggregation Control Protocol(LACP),
IEEE 802.3ad
pagp(2) Port Aggregation Protocol"
SYNTAX INTEGER {
lacp(1),
pagp(2)
}
ClagPortAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated type for all the LACP administrative states on
a particular aggregation port.
off(1) No LACP involved on the aggregation port.
on(2) The aggregation port always join link
aggregation whithout any LACP protocol
involved.
active(3) Active LACP indicates the port's preference
to participate in the protocol regardless of
Partner's control value.
passive(4) Passive indicates the port's preference for
not transmitting LACP PDU unless its Partner's
control value is Active LACP."
SYNTAX INTEGER {
off(1),
on(2),
active(3),
passive(4)
}
-- -------------------------------------------------------------
--
-- -------------------------------------------------------------
-- groups in the LAG MIB
-- -------------------------------------------------------------
clagGlobalConfigObjects OBJECT IDENTIFIER
::= { clagMIBObjects 1 }
clagAgg OBJECT IDENTIFIER
::= { clagMIBObjects 2 }
clagAggPort OBJECT IDENTIFIER
::= { clagMIBObjects 3 }
clagAggPortList OBJECT IDENTIFIER
::= { clagMIBObjects 4 }
clagAggChannelIntf OBJECT IDENTIFIER
::= { clagMIBObjects 5 }
-- -------------------------------------------------------------
--
-- -------------------------------------------------------------
-- The Aggregation Global Configuration
-- -------------------------------------------------------------
clagAggDistributionProtocol OBJECT-TYPE
SYNTAX ClagDistributionProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the load balancing algorithms
used on this port channel interface to distribute outgoing
data frames among its component interfaces."
::= { clagGlobalConfigObjects 1 }
clagAggDistributionAddressMode OBJECT-TYPE
SYNTAX ClagDistributionAddressMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The load balancing address mode for the device."
::= { clagGlobalConfigObjects 2 }
clagAggDistributionMplsProtocol OBJECT-TYPE
SYNTAX ClagDistributionMplsProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the load balancing algorithms
used on this port channel interface to distribute
outgoing MPLS data frames among its component interfaces.
This object is only instantiated on platforms which
support aggregation load balancing for MPLS packets."
::= { clagGlobalConfigObjects 3 }
clagAggMaxAggregators OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of aggregators
supported by the device."
::= { clagGlobalConfigObjects 4 }
clagAggHashDistMethodGlobalConfig OBJECT-TYPE
SYNTAX INTEGER {
adaptive(1),
fixed(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the global configuration for hash
distribution method applied on a port channel
interface among its channel members.
adaptive(1) : Adaptive hash distribution for the bundle
among port channel members.
fixed(2) : Fixed hash distribution for the bundle
among port channel members."
::= { clagGlobalConfigObjects 5 }
-- -------------------------------------------------------------
-- The Aggregation Protocol Table
-- -------------------------------------------------------------
clagAggProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClagAggProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains protocol information about every
interface which supports link aggregation."
::= { clagAgg 1 }
clagAggProtocolEntry OBJECT-TYPE
SYNTAX ClagAggProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing aggregation protocol type for a
particular interface. An entry is created in this
table when its associated ifEntry is created and that
interface supports link aggregation. The entry of this
table is deleted when the associated ifEntry is removed."
INDEX { ifIndex }
::= { clagAggProtocolTable 1 }
ClagAggProtocolEntry ::= SEQUENCE {
clagAggProtocolType ClagAggregationProtocol
}
clagAggProtocolType OBJECT-TYPE
SYNTAX ClagAggregationProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aggregation protocol type for the interface.
On some platforms, aggregation protocol may be assigned per
group. The group can be a collection of the ports which belong
to a module or system. If the aggregation protocol is assigned
to any of the ports in such group then the aggregation protocol
will apply to all ports in the same group.
On some platforms, aggregation protocol type can be assigned
per aggregator. If multiple ports belong to a aggregator,
the aggregation protocol assigned to any of the ports in such
aggregator will apply to all ports in the same."
::= { clagAggProtocolEntry 1 }
-- -------------------------------------------------------------
-- The Aggregation Port Configuration Table
-- -------------------------------------------------------------
clagAggPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClagAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every
aggregation port that is associated with this system.
This table contains additional objects for the
dot3adAggPortTable."
REFERENCE "IEEE 802.3 Subclause 30.7.2"
::= { clagAggPort 1 }
clagAggPortEntry OBJECT-TYPE
SYNTAX ClagAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular aggregation port."
AUGMENTS { dot3adAggPortEntry }
::= { clagAggPortTable 1 }
ClagAggPortEntry ::= SEQUENCE {
clagAggPortAdminStatus ClagPortAdminStatus,
clagAggPortRate INTEGER
}
clagAggPortAdminStatus OBJECT-TYPE
SYNTAX ClagPortAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of the LACP protocol on this
aggregation port."
::= { clagAggPortEntry 1 }
clagAggPortRate OBJECT-TYPE
SYNTAX INTEGER {
fast(1),
normal(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the requested exchange rate of LACP packets
on this interface.
fast(1) : The device requests its peers to send LACP packets
at fast rate to this interface.
normal(2): The decice requests its peers to send LACP packets
at normal rate to this interface."
::= { clagAggPortEntry 2 }
-- -------------------------------------------------------------
-- The Port List Table
-- -------------------------------------------------------------
clagAggPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClagAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the dot3adAggPortListTable and
provides the complete list of ports associated with
each Aggregator."
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
::= { clagAggPortList 1 }
clagAggPortListEntry OBJECT-TYPE
SYNTAX ClagAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the ports associated with a given Aggregator."
AUGMENTS { dot3adAggPortListEntry }
::= { clagAggPortListTable 1 }
ClagAggPortListEntry ::= SEQUENCE {
clagAggPortListPorts OCTET STRING,
clagAggPortListInterfaceIndexList CiscoInterfaceIndexList
}
clagAggPortListPorts OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a list of ports currently associated
with this Aggregator in the format of
'[number_of_ports][cieIfDot1dBaseMappingPort1][...]
[cieIfDot1dBaseMappingPortn]'
where
[number_of_ports] is of size 2 octet and indicates
the number of ports contains in this object. It
also indicates the number of cieIfDot1dBaseMappingPort field
following this field.
[cieIfDot1dBaseMappingPort'n'] is the value of
cieIfDot1dBaseMappingPort of the 'n' port associated with this
Aggregation and has size of 2 octets where n is up to
[number_of_ports]."
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
::= { clagAggPortListEntry 1 }
clagAggPortListInterfaceIndexList OBJECT-TYPE
SYNTAX CiscoInterfaceIndexList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a list of ports currently associated
with this Aggregator in the format of CiscoInterfaceIndexList."
REFERENCE "IEEE 802.3 Subclause 30.7.1.1.30"
::= { clagAggPortListEntry 2}
-- -------------------------------------------------------------
-- The Aggregation Channel Interface Table
-- -------------------------------------------------------------
clagAggChannelIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClagAggChannelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table providing port channel
configuration information for port channel
interfaces identified by ifIndex."
::= { clagAggChannelIntf 1 }
clagAggChannelIfEntry OBJECT-TYPE
SYNTAX ClagAggChannelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing port channel
configuration information for port
channel interfaces."
INDEX { ifIndex }
::= { clagAggChannelIfTable 1 }
ClagAggChannelIfEntry ::= SEQUENCE {
clagAggChannelIfFastSwitchOver TruthValue,
clagAggChannelIfMaxBundle Unsigned32,
clagAggChannelIfMinLink Unsigned32,
clagAggChannelIfHashDistAdminMethod INTEGER,
clagAggChannelIfHashDistOperMethod INTEGER
}
clagAggChannelIfFastSwitchOver OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether LACP protocol fast switchover
mode is enabled on this port channel interface
or not."
::= { clagAggChannelIfEntry 1 }
clagAggChannelIfMaxBundle OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of member
ports that can be bundled on this port
channel interface for LACP protocol."
::= { clagAggChannelIfEntry 2 }
clagAggChannelIfMinLink OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum number of bundled member ports that are
needed in order for this port channel interface to be
operational.
A value of zero for this object indicates that no minimum
number of bundled member ports are required for this port
channel interface to be operational."
::= { clagAggChannelIfEntry 3 }
clagAggChannelIfHashDistAdminMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
adaptive(2),
fixed(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the hash distribution method that is administratively
configured on this port channel interface upon its channel
membership transition event.
none(1) : Hash distribution algorithm on this
port channel interface is not specifically
configured and global configuration of
clagAggHashDistMethodGlobalConfig will
be applied on this port channel interface.
adaptive(2) : Adaptive hash distribution for this port
channel interface among its channel members.
fixed(3) : Fixed hash distribution for this port channel
interface among its channel members."
::= { clagAggChannelIfEntry 4 }
clagAggChannelIfHashDistOperMethod OBJECT-TYPE
SYNTAX INTEGER {
other(1),
adaptive(2),
fixed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the operational hash distribution method
for this port channel interface among the port channel members.
other(1) : None of the following.
adaptive(2) : Adaptive hash distribution for the
port channel interface among its
channel members.
fixed(3) : Fixed hash distribution for the port
channel among channel members."
::= { clagAggChannelIfEntry 5 }
-- -------------------------------------------------------------
-- Notifications
-- -------------------------------------------------------------
clagMIBNotifications OBJECT IDENTIFIER
::= { ciscoLagMIB 2 }
-- no notifications defined
--
-- -------------------------------------------------------------
-- Conformance
-- -------------------------------------------------------------
clagMIBConformance OBJECT IDENTIFIER
::= { ciscoLagMIB 3 }
clagMIBCompliances OBJECT IDENTIFIER
::= { clagMIBConformance 1 }
clagMIBGroups OBJECT IDENTIFIER
::= { clagMIBConformance 2 }
-- -------------------------------------------------------------
--
-- -------------------------------------------------------------
-- Compliance
-- -------------------------------------------------------------
clagMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 1 }
clagMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
GROUP clagAggDistributionMplsGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing for MPLS
packets."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 2 }
clagMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
GROUP clagAggDistributionMplsGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing for MPLS
packets."
GROUP clagAggPortListGroup
DESCRIPTION
"This group is mandatory for the devices which
supports dot1dBasePort value greater than 2048."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 3 }
clagMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
GROUP clagAggDistributionMplsGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing for MPLS
packets."
GROUP clagAggPortListGroup
DESCRIPTION
"This group is mandatory for the devices which
supports dot1dBasePort value greater than 2048."
GROUP clagAggMaxAggregatorsGroup
DESCRIPTION
"This group is mandatory for the devices which
provides the information about the maximum number
of aggregators supported by the device."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 4 }
clagMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
GROUP clagAggDistributionMplsGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing for MPLS
packets."
GROUP clagAggPortListGroup
DESCRIPTION
"This group is mandatory for the devices which
supports dot1dBasePort value greater than 2048."
GROUP clagAggMaxAggregatorsGroup
DESCRIPTION
"This group is mandatory for the devices which
provides the information about the maximum number
of aggregators supported by the device."
GROUP clagAggRateGroup
DESCRIPTION
"This group is mandatory for devices that support
LACP packet ingression rate on interfaces."
GROUP clagAggChannelIfLacpGroup
DESCRIPTION
"This group is mandatory for the devices which
support the LACP port channel configurations on
port channel interfaces."
GROUP clagAggChannelIfHashDistMethodGroup
DESCRIPTION
"This group is mandatory for the devices which
support the hash distribution method configurations on
port channel interfaces."
GROUP clagAggHashDistGlobalGroup
DESCRIPTION
"This group is mandatory for the devices which support
global configuration of hash distribution method on
port channel interface."
GROUP clagAggChannelIfMinLinkGroup
DESCRIPTION
"This group is mandatory for the devices which
support minimum link configurations on port channel
interfaces."
OBJECT clagAggDistributionProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggDistributionAddressMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggDistributionMplsProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggHashDistMethodGlobalConfig
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfFastSwitchOver
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfMaxBundle
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfMinLink
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfHashDistAdminMethod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 5 }
clagMIBCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Link Aggregation MIB"
MODULE -- this module
MANDATORY-GROUPS {
clagAggProtocolGroup,
clagAggPortGroup
}
GROUP clagAggDistributionGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing."
GROUP clagAggDistributionMplsGroup
DESCRIPTION
"This group is mandatory for the devices which
supported aggregation load balancing for MPLS
packets."
GROUP clagAggPortListGroup
DESCRIPTION
"This group is mandatory for the devices which
supports dot1dBasePort value greater than 2048."
GROUP clagAggMaxAggregatorsGroup
DESCRIPTION
"This group is mandatory for the devices which
provides the information about the maximum number
of aggregators supported by the device."
GROUP clagAggRateGroup
DESCRIPTION
"This group is mandatory for devices that support
LACP packet ingression rate on interfaces."
GROUP clagAggChannelIfLacpGroup
DESCRIPTION
"This group is mandatory for the devices which
support the LACP port channel configurations on
port channel interfaces."
GROUP clagAggChannelIfHashDistMethodGroup
DESCRIPTION
"This group is mandatory for the devices which
support the hash distribution method configurations on
port channel interfaces."
GROUP clagAggHashDistGlobalGroup
DESCRIPTION
"This group is mandatory for the devices which support
global configuration of hash distribution method on
port channel interface."
GROUP clagAggChannelIfMinLinkGroup
DESCRIPTION
"This group is mandatory for the devices which
support minimum link configurations on port channel
interfaces."
GROUP clagAggPortListInterfaceIndexGroup
DESCRIPTION
"This group is mandatory for the devices which
support Layer3 LACP interfaces."
OBJECT clagAggDistributionProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggDistributionAddressMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggDistributionMplsProtocol
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggHashDistMethodGlobalConfig
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggProtocolType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggPortRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfFastSwitchOver
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfMaxBundle
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfMinLink
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT clagAggChannelIfHashDistAdminMethod
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { clagMIBCompliances 6 }
-- -------------------------------------------------------------
-- Units of Conformance
-- -------------------------------------------------------------
clagAggProtocolGroup OBJECT-GROUP
OBJECTS { clagAggProtocolType }
STATUS current
DESCRIPTION
"The object that provide aggregation protocol type of an
interface. These are additional to the IEEE Std 802.3ad
MIB."
::= { clagMIBGroups 1 }
clagAggPortGroup OBJECT-GROUP
OBJECTS { clagAggPortAdminStatus }
STATUS current
DESCRIPTION
"A collection of objects that provide admin status
about an aggregation port. These are additional to the
IEEE Std 802.3ad MIB."
::= { clagMIBGroups 2 }
clagAggDistributionGroup OBJECT-GROUP
OBJECTS {
clagAggDistributionProtocol,
clagAggDistributionAddressMode
}
STATUS current
DESCRIPTION
"A collection of objects that provide the load balancing
information for an aggregator. These are additional to
the IEEE Std 802.3ad MIB."
::= { clagMIBGroups 3 }
clagAggDistributionMplsGroup OBJECT-GROUP
OBJECTS { clagAggDistributionMplsProtocol }
STATUS current
DESCRIPTION
"A collection of objects that provide the load balancing
information for an aggregator for MPLS packets.
These are additional to the IEEE Std 802.3ad MIB."
::= { clagMIBGroups 4 }
clagAggPortListGroup OBJECT-GROUP
OBJECTS { clagAggPortListPorts }
STATUS current
DESCRIPTION
"A collection of object that provides information about
ports in an aggregation."
::= { clagMIBGroups 5 }
clagAggMaxAggregatorsGroup OBJECT-GROUP
OBJECTS { clagAggMaxAggregators }
STATUS current
DESCRIPTION
"A collection of object that provides information about
the maximum number of aggregators supported by the
device."
::= { clagMIBGroups 6 }
clagAggRateGroup OBJECT-GROUP
OBJECTS { clagAggPortRate }
STATUS current
DESCRIPTION
"A collection of object that provides information about
the rate at which LACP packets are ingressed on
interfaces."
::= { clagMIBGroups 7 }
clagAggChannelIfLacpGroup OBJECT-GROUP
OBJECTS {
clagAggChannelIfFastSwitchOver,
clagAggChannelIfMaxBundle
}
STATUS current
DESCRIPTION
"A collection of objects that provides information about
the LACP protocol configurations for port channel
interfaces."
::= { clagMIBGroups 8 }
clagAggChannelIfHashDistMethodGroup OBJECT-GROUP
OBJECTS {
clagAggChannelIfHashDistAdminMethod,
clagAggChannelIfHashDistOperMethod
}
STATUS current
DESCRIPTION
"A collection of objects that provides information about
the port channel configurations of hash distribution
method on port channel interfaces."
::= { clagMIBGroups 9 }
clagAggHashDistGlobalGroup OBJECT-GROUP
OBJECTS { clagAggHashDistMethodGlobalConfig }
STATUS current
DESCRIPTION
"A collection of object that provides information about global
configuration of hash distribution method on port channel
interface."
::= { clagMIBGroups 10 }
clagAggChannelIfMinLinkGroup OBJECT-GROUP
OBJECTS {
clagAggChannelIfMinLink
}
STATUS current
DESCRIPTION
"A collection of objects that provides information about
the minimum link configurations for port channel
interfaces."
::= { clagMIBGroups 11 }
clagAggPortListInterfaceIndexGroup OBJECT-GROUP
OBJECTS {
clagAggPortListInterfaceIndexList
}
STATUS current
DESCRIPTION
"A collection of objects that provides information about
ports in an aggregation in the format of
CiscoInterfaceIndexList."
::= { clagMIBGroups 12 }
END
Reference in New Issue Copy Permalink