mibs/MIBS/cisco/CISCOSB-vlanVoice-MIB

458 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CISCOSB-vlanVoice-MIB DEFINITIONS ::= BEGIN
IMPORTS
vlan FROM CISCOSB-vlan-MIB
TruthValue, RowStatus,MacAddress,
DisplayString FROM SNMPv2-TC
ifIndex FROM IF-MIB
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
VlanIndex FROM Q-BRIDGE-MIB
VlanPriority FROM CISCOSB-MIB;
vlanVoice MODULE-IDENTITY
LAST-UPDATED "201001090000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for voice vlan support in switch devices."
REVISION "201009260000Z"
DESCRIPTION
"Editorial changes to support new MIB compilers."
REVISION "201009260000Z"
DESCRIPTION
"Initial version of this MIB."
::= { vlan 54 }
-- voice vlan
-- start from 6 since 1..5 are deprecated voice
vlanVoiceAdminState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
auto-enabled(1),
auto-triggered(2),
oui-enabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" administrative voice vlan status "
::= { vlanVoice 6 }
vlanVoiceOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
auto-enabled(1),
auto-triggered(2),
oui-enabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" operational voice vlan status "
::= { vlanVoice 7 }
vlanVoiceAdminVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1-4094 actual vlan (must exist in dot1qvlan static table)"
DEFVAL { 1 }
::= { vlanVoice 8 }
vlanVoiceOperVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" operational Voice Vlan ID"
::= { vlanVoice 9 }
-- Voice VLAN local configuration configuration Table
vlanVoiceUcDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanVoiceUcDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static default and UC directly connected to device configuration."
::= { vlanVoice 10 }
vlanVoiceUcDeviceEntry OBJECT-TYPE
SYNTAX VlanVoiceUcDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static and dynamic per port information for a voice VLAN."
INDEX { vlanVoiceUcDeviceType, vlanVoiceUcDeviceMacAddress, vlanVoiceUcDeviceInterface }
::= { vlanVoiceUcDeviceTable 1 }
VlanVoiceUcDeviceEntry ::= SEQUENCE {
vlanVoiceUcDeviceType INTEGER { default(0), static(1), uc(2) },
vlanVoiceUcDeviceMacAddress MacAddress,
vlanVoiceUcDeviceInterface INTEGER,
vlanVoiceUcDeviceVid INTEGER (1..4094),
vlanVoiceUcDeviceVpt INTEGER (0..7),
vlanVoiceUcDeviceDscp INTEGER (0..63),
vlanVoiceUcDeviceIsBest TruthValue
}
vlanVoiceUcDeviceType OBJECT-TYPE
SYNTAX INTEGER { default(0),
static(1),
uc(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"type of entry"
::= { vlanVoiceUcDeviceEntry 1 }
vlanVoiceUcDeviceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac address of UC"
::= { vlanVoiceUcDeviceEntry 2 }
vlanVoiceUcDeviceInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mac interface on which UC is connected"
::= { vlanVoiceUcDeviceEntry 3 }
vlanVoiceUcDeviceVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Voice Vlan ID"
::= { vlanVoiceUcDeviceEntry 4 }
vlanVoiceUcDeviceVpt OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry VPT"
::= { vlanVoiceUcDeviceEntry 5 }
vlanVoiceUcDeviceDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entry DSCP value"
::= { vlanVoiceUcDeviceEntry 6 }
vlanVoiceUcDeviceIsBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this entry is used as best local configuration"
::= { vlanVoiceUcDeviceEntry 7 }
-- voice vlan auto
vlanVoiceAuto OBJECT IDENTIFIER ::= { vlanVoice 11 }
-- voice vlan auto admin
vlanVoiceAutoAdmin OBJECT IDENTIFIER ::= { vlanVoiceAuto 1 }
vlanVoiceAutoAdminVpt OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"user configured VPT for Voice Vlan operation"
DEFVAL { 0 }
::= { vlanVoiceAutoAdmin 1 }
vlanVoiceAutoAdminDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"user configured DSCP for Voice Vlan operation"
DEFVAL { 0 }
::= { vlanVoiceAutoAdmin 2 }
-- voice vlan auto oper
vlanVoiceAutoOper OBJECT IDENTIFIER ::= { vlanVoiceAuto 2 }
vlanVoiceAutoOperVpt OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"operational VPT for Voice Vlan operation"
::= { vlanVoiceAutoOper 1 }
vlanVoiceAutoOperDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user configured DSCP for Voice Vlan operation"
::= { vlanVoiceAutoOper 2 }
vlanVoiceAutoOperSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac address of the switch by which we've selected the VVID"
::= {vlanVoiceAutoOper 3 }
vlanVoiceAutoOperPriority OBJECT-TYPE
SYNTAX INTEGER {
staticActive(0), -- VVID selected according to user configuration of an active device
staticInActive(1), -- VVID selected according to user configuration of an inactive device
ucActive(2), -- VVID selected according to UC device + UC device is active
ucInActive(3), -- VVID selected according to UC device + UC device is inactive
default(6), -- VVID is at default (no UC device + no static configuration in lan)
disabled(10) -- Voice Vlan is disabled
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for which Voice Vlan ID was selected."
::= { vlanVoiceAutoOper 4 }
vlanVoiceAutoRefresh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting the MIB to True, VSDP refresh will be executed."
::= { vlanVoiceAuto 3 }
vlanVoiceAutoAgreedVlanLastChange OBJECT-TYPE
SYNTAX DisplayString (SIZE(12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"date format is DDMMYYHHMMSS"
::= { vlanVoiceAuto 4 }
-- voice vlan OUI
vlanVoiceOUIBased OBJECT IDENTIFIER ::= { vlanVoice 12 }
vlanVoiceOUIBasedAdminPriority OBJECT-TYPE
SYNTAX VlanPriority
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned Priority, which will be used
for all traffic on the voice vlan, this gives the packets
the requested priority (CoS) within the bridge."
DEFVAL { 6 }
::= { vlanVoiceOUIBased 1 }
vlanVoiceOUIBasedAdminRemark OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remark VPT on tagged frames egress the voice vlan according.
to priority true.false"
DEFVAL { false }
::= { vlanVoiceOUIBased 2 }
vlanVoiceOUIBasedSetToDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlanVoiceOUIBasedSetToDefault indicates that vlanVoiceOUIBasedTable
should be set to it's default values if existed
(OUI default prefixes).
To do so the vlanVoiceOUIBasedTable should be previously deleted by usual
entries destroying.
This object behaviors as write-only than
reading this object will always return 'false'."
DEFVAL{ false }
::= { vlanVoiceOUIBased 3 }
-- Voice VLAN OUI Table
vlanVoiceOUIBasedTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanVoiceOUIBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset."
::= { vlanVoiceOUIBased 4 }
vlanVoiceOUIBasedEntry OBJECT-TYPE
SYNTAX VlanVoiceOUIBasedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a voice VLANs OUI MAC Prefixes configured into the
device by management."
INDEX { vlanVoiceOUIBasedPrefix }
::= { vlanVoiceOUIBasedTable 1 }
VlanVoiceOUIBasedEntry ::= SEQUENCE {
vlanVoiceOUIBasedPrefix OCTET STRING,
vlanVoiceOUIBasedDescription DisplayString,
vlanVoiceOUIBasedEntryRowStatus RowStatus
}
vlanVoiceOUIBasedPrefix OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(3))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value used to identify the OUI MAC Prefix component
associated with this entry.
The value of this object is used as an index to the
vlanVoiceOUIBasedTable.
Voice VLANs OUI Prefix is the first 3 most significant
octets of the MAC address."
::= { vlanVoiceOUIBasedEntry 1 }
vlanVoiceOUIBasedDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An optional text that describes the OUI."
DEFVAL {""}
::= { vlanVoiceOUIBasedEntry 2 }
vlanVoiceOUIBasedEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { vlanVoiceOUIBasedEntry 3 }
-- Voice VLAN per Port configuration Table
vlanVoiceOUIBasedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanVoiceOUIBasedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset."
::= { vlanVoiceOUIBased 5 }
vlanVoiceOUIBasedPortEntry OBJECT-TYPE
SYNTAX VlanVoiceOUIBasedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static and dynamic per port information for a voice VLAN."
INDEX { ifIndex }
::= { vlanVoiceOUIBasedPortTable 1 }
VlanVoiceOUIBasedPortEntry ::= SEQUENCE {
vlanVoiceOUIBasedPortEnable TruthValue,
vlanVoiceOUIBasedPortVlanIndex VlanIndex,
vlanVoiceOUIBasedPortSecure TruthValue,
vlanVoiceOUIBasedPortCurrentMembership INTEGER {active(1),notActive(2)},
vlanVoiceOUIBasedPortQosMode INTEGER {src(1),all(2)}
}
vlanVoiceOUIBasedPortEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this port to be a candidate to be added into the Voice VLAN."
DEFVAL{ false }
::= { vlanVoiceOUIBasedPortEntry 1 }
vlanVoiceOUIBasedPortVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Voice VLAN-ID the port is a candidate to be in."
DEFVAL{ 4095 }
::= { vlanVoiceOUIBasedPortEntry 2 }
vlanVoiceOUIBasedPortSecure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify this port to be in Secure Mode when entering the Voice VLAN.
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
are accepted, otherwise dropped."
DEFVAL{ false }
::= { vlanVoiceOUIBasedPortEntry 3 }
vlanVoiceOUIBasedPortCurrentMembership OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notActive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port's current status of membership in Voice VLAN.
Port's possible values of membership in Voice VLAN:
'Active(1)' - Port is currently added to a Voice VLAN .
'NotActive(2)' - Specifies either that port is a candidate to be
in Voice VLAN or disabled."
::= { vlanVoiceOUIBasedPortEntry 4 }
vlanVoiceOUIBasedPortQosMode OBJECT-TYPE
SYNTAX INTEGER {
src(1),
all(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port's current QOS mode in Voice VLAN.
Possible values:
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
'all(2)' - All traffic through that port received QOS of the Voice Vlan."
::= { vlanVoiceOUIBasedPortEntry 5 }
vlanVoiceOUIBasedAgingTimeout OBJECT-TYPE
SYNTAX INTEGER (1..43200)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlanVoiceAgingTimeout indicates the time (in units of
minutes) from when the last OUI MAC was ageout from the FDB the port
will be removed from the Voice VLAN.
The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours).
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system."
DEFVAL { 1440 }
::= { vlanVoiceOUIBased 6 }
END