458 lines
14 KiB
Plaintext
458 lines
14 KiB
Plaintext
CISCOSB-vlanVoice-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
vlan FROM CISCOSB-vlan-MIB
|
|
TruthValue, RowStatus,MacAddress,
|
|
DisplayString FROM SNMPv2-TC
|
|
ifIndex FROM IF-MIB
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
VlanIndex FROM Q-BRIDGE-MIB
|
|
VlanPriority FROM CISCOSB-MIB;
|
|
|
|
vlanVoice MODULE-IDENTITY
|
|
LAST-UPDATED "201001090000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for voice vlan support in switch devices."
|
|
REVISION "201009260000Z"
|
|
DESCRIPTION
|
|
"Editorial changes to support new MIB compilers."
|
|
REVISION "201009260000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { vlan 54 }
|
|
|
|
-- voice vlan
|
|
|
|
-- start from 6 since 1..5 are deprecated voice
|
|
vlanVoiceAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
auto-enabled(1),
|
|
auto-triggered(2),
|
|
oui-enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" administrative voice vlan status "
|
|
::= { vlanVoice 6 }
|
|
|
|
vlanVoiceOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
auto-enabled(1),
|
|
auto-triggered(2),
|
|
oui-enabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" operational voice vlan status "
|
|
::= { vlanVoice 7 }
|
|
|
|
vlanVoiceAdminVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"1-4094 actual vlan (must exist in dot1qvlan static table)"
|
|
DEFVAL { 1 }
|
|
::= { vlanVoice 8 }
|
|
|
|
vlanVoiceOperVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" operational Voice Vlan ID"
|
|
::= { vlanVoice 9 }
|
|
|
|
-- Voice VLAN local configuration configuration Table
|
|
vlanVoiceUcDeviceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanVoiceUcDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static default and UC directly connected to device configuration."
|
|
::= { vlanVoice 10 }
|
|
|
|
vlanVoiceUcDeviceEntry OBJECT-TYPE
|
|
SYNTAX VlanVoiceUcDeviceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static and dynamic per port information for a voice VLAN."
|
|
INDEX { vlanVoiceUcDeviceType, vlanVoiceUcDeviceMacAddress, vlanVoiceUcDeviceInterface }
|
|
::= { vlanVoiceUcDeviceTable 1 }
|
|
|
|
VlanVoiceUcDeviceEntry ::= SEQUENCE {
|
|
vlanVoiceUcDeviceType INTEGER { default(0), static(1), uc(2) },
|
|
vlanVoiceUcDeviceMacAddress MacAddress,
|
|
vlanVoiceUcDeviceInterface INTEGER,
|
|
vlanVoiceUcDeviceVid INTEGER (1..4094),
|
|
vlanVoiceUcDeviceVpt INTEGER (0..7),
|
|
vlanVoiceUcDeviceDscp INTEGER (0..63),
|
|
vlanVoiceUcDeviceIsBest TruthValue
|
|
}
|
|
|
|
vlanVoiceUcDeviceType OBJECT-TYPE
|
|
SYNTAX INTEGER { default(0),
|
|
static(1),
|
|
uc(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"type of entry"
|
|
::= { vlanVoiceUcDeviceEntry 1 }
|
|
|
|
|
|
vlanVoiceUcDeviceMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac address of UC"
|
|
::= { vlanVoiceUcDeviceEntry 2 }
|
|
|
|
vlanVoiceUcDeviceInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac interface on which UC is connected"
|
|
::= { vlanVoiceUcDeviceEntry 3 }
|
|
|
|
vlanVoiceUcDeviceVid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Voice Vlan ID"
|
|
::= { vlanVoiceUcDeviceEntry 4 }
|
|
|
|
vlanVoiceUcDeviceVpt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry VPT"
|
|
::= { vlanVoiceUcDeviceEntry 5 }
|
|
|
|
vlanVoiceUcDeviceDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry DSCP value"
|
|
::= { vlanVoiceUcDeviceEntry 6 }
|
|
|
|
vlanVoiceUcDeviceIsBest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether this entry is used as best local configuration"
|
|
::= { vlanVoiceUcDeviceEntry 7 }
|
|
|
|
-- voice vlan auto
|
|
vlanVoiceAuto OBJECT IDENTIFIER ::= { vlanVoice 11 }
|
|
|
|
-- voice vlan auto admin
|
|
|
|
vlanVoiceAutoAdmin OBJECT IDENTIFIER ::= { vlanVoiceAuto 1 }
|
|
|
|
vlanVoiceAutoAdminVpt OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"user configured VPT for Voice Vlan operation"
|
|
DEFVAL { 0 }
|
|
::= { vlanVoiceAutoAdmin 1 }
|
|
|
|
vlanVoiceAutoAdminDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"user configured DSCP for Voice Vlan operation"
|
|
DEFVAL { 0 }
|
|
::= { vlanVoiceAutoAdmin 2 }
|
|
|
|
-- voice vlan auto oper
|
|
|
|
vlanVoiceAutoOper OBJECT IDENTIFIER ::= { vlanVoiceAuto 2 }
|
|
|
|
vlanVoiceAutoOperVpt OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"operational VPT for Voice Vlan operation"
|
|
::= { vlanVoiceAutoOper 1 }
|
|
|
|
vlanVoiceAutoOperDscp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"user configured DSCP for Voice Vlan operation"
|
|
::= { vlanVoiceAutoOper 2 }
|
|
|
|
vlanVoiceAutoOperSource OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Mac address of the switch by which we've selected the VVID"
|
|
::= {vlanVoiceAutoOper 3 }
|
|
|
|
vlanVoiceAutoOperPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
staticActive(0), -- VVID selected according to user configuration of an active device
|
|
staticInActive(1), -- VVID selected according to user configuration of an inactive device
|
|
ucActive(2), -- VVID selected according to UC device + UC device is active
|
|
ucInActive(3), -- VVID selected according to UC device + UC device is inactive
|
|
default(6), -- VVID is at default (no UC device + no static configuration in lan)
|
|
disabled(10) -- Voice Vlan is disabled
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for which Voice Vlan ID was selected."
|
|
::= { vlanVoiceAutoOper 4 }
|
|
|
|
|
|
vlanVoiceAutoRefresh OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By setting the MIB to True, VSDP refresh will be executed."
|
|
::= { vlanVoiceAuto 3 }
|
|
|
|
vlanVoiceAutoAgreedVlanLastChange OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(12))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"date format is DDMMYYHHMMSS"
|
|
::= { vlanVoiceAuto 4 }
|
|
|
|
|
|
-- voice vlan OUI
|
|
|
|
vlanVoiceOUIBased OBJECT IDENTIFIER ::= { vlanVoice 12 }
|
|
|
|
vlanVoiceOUIBasedAdminPriority OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An administratively assigned Priority, which will be used
|
|
for all traffic on the voice vlan, this gives the packets
|
|
the requested priority (CoS) within the bridge."
|
|
DEFVAL { 6 }
|
|
::= { vlanVoiceOUIBased 1 }
|
|
|
|
vlanVoiceOUIBasedAdminRemark OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remark VPT on tagged frames egress the voice vlan according.
|
|
to priority true.false"
|
|
DEFVAL { false }
|
|
::= { vlanVoiceOUIBased 2 }
|
|
|
|
vlanVoiceOUIBasedSetToDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlanVoiceOUIBasedSetToDefault indicates that vlanVoiceOUIBasedTable
|
|
should be set to it's default values if existed
|
|
(OUI default prefixes).
|
|
|
|
To do so the vlanVoiceOUIBasedTable should be previously deleted by usual
|
|
entries destroying.
|
|
|
|
This object behaviors as write-only than
|
|
reading this object will always return 'false'."
|
|
DEFVAL{ false }
|
|
::= { vlanVoiceOUIBased 3 }
|
|
|
|
-- Voice VLAN OUI Table
|
|
vlanVoiceOUIBasedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanVoiceOUIBasedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
|
|
All entries are permanent and will be restored after the device is reset."
|
|
::= { vlanVoiceOUIBased 4 }
|
|
|
|
vlanVoiceOUIBasedEntry OBJECT-TYPE
|
|
SYNTAX VlanVoiceOUIBasedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information for a voice VLANs OUI MAC Prefixes configured into the
|
|
device by management."
|
|
INDEX { vlanVoiceOUIBasedPrefix }
|
|
::= { vlanVoiceOUIBasedTable 1 }
|
|
|
|
VlanVoiceOUIBasedEntry ::= SEQUENCE {
|
|
vlanVoiceOUIBasedPrefix OCTET STRING,
|
|
vlanVoiceOUIBasedDescription DisplayString,
|
|
vlanVoiceOUIBasedEntryRowStatus RowStatus
|
|
}
|
|
|
|
vlanVoiceOUIBasedPrefix OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the OUI MAC Prefix component
|
|
associated with this entry.
|
|
|
|
The value of this object is used as an index to the
|
|
vlanVoiceOUIBasedTable.
|
|
|
|
Voice VLANs OUI Prefix is the first 3 most significant
|
|
octets of the MAC address."
|
|
::= { vlanVoiceOUIBasedEntry 1 }
|
|
|
|
vlanVoiceOUIBasedDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An optional text that describes the OUI."
|
|
DEFVAL {""}
|
|
::= { vlanVoiceOUIBasedEntry 2 }
|
|
|
|
vlanVoiceOUIBasedEntryRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { vlanVoiceOUIBasedEntry 3 }
|
|
|
|
-- Voice VLAN per Port configuration Table
|
|
vlanVoiceOUIBasedPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanVoiceOUIBasedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing static and dynamic per port configuration information for Voice VLAN.
|
|
All entries are permanent and will be restored after the device is reset."
|
|
::= { vlanVoiceOUIBased 5 }
|
|
|
|
vlanVoiceOUIBasedPortEntry OBJECT-TYPE
|
|
SYNTAX VlanVoiceOUIBasedPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static and dynamic per port information for a voice VLAN."
|
|
INDEX { ifIndex }
|
|
::= { vlanVoiceOUIBasedPortTable 1 }
|
|
|
|
VlanVoiceOUIBasedPortEntry ::= SEQUENCE {
|
|
vlanVoiceOUIBasedPortEnable TruthValue,
|
|
vlanVoiceOUIBasedPortVlanIndex VlanIndex,
|
|
vlanVoiceOUIBasedPortSecure TruthValue,
|
|
vlanVoiceOUIBasedPortCurrentMembership INTEGER {active(1),notActive(2)},
|
|
vlanVoiceOUIBasedPortQosMode INTEGER {src(1),all(2)}
|
|
}
|
|
|
|
vlanVoiceOUIBasedPortEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable this port to be a candidate to be added into the Voice VLAN."
|
|
DEFVAL{ false }
|
|
::= { vlanVoiceOUIBasedPortEntry 1 }
|
|
|
|
vlanVoiceOUIBasedPortVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIndex
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Voice VLAN-ID the port is a candidate to be in."
|
|
DEFVAL{ 4095 }
|
|
::= { vlanVoiceOUIBasedPortEntry 2 }
|
|
|
|
vlanVoiceOUIBasedPortSecure OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify this port to be in Secure Mode when entering the Voice VLAN.
|
|
In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes
|
|
are accepted, otherwise dropped."
|
|
DEFVAL{ false }
|
|
::= { vlanVoiceOUIBasedPortEntry 3 }
|
|
|
|
vlanVoiceOUIBasedPortCurrentMembership OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notActive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port's current status of membership in Voice VLAN.
|
|
|
|
Port's possible values of membership in Voice VLAN:
|
|
'Active(1)' - Port is currently added to a Voice VLAN .
|
|
'NotActive(2)' - Specifies either that port is a candidate to be
|
|
in Voice VLAN or disabled."
|
|
::= { vlanVoiceOUIBasedPortEntry 4 }
|
|
|
|
vlanVoiceOUIBasedPortQosMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
src(1),
|
|
all(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port's current QOS mode in Voice VLAN.
|
|
Possible values:
|
|
'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan.
|
|
'all(2)' - All traffic through that port received QOS of the Voice Vlan."
|
|
::= { vlanVoiceOUIBasedPortEntry 5 }
|
|
|
|
vlanVoiceOUIBasedAgingTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..43200)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlanVoiceAgingTimeout indicates the time (in units of
|
|
minutes) from when the last OUI MAC was ageout from the FDB the port
|
|
will be removed from the Voice VLAN.
|
|
|
|
The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours).
|
|
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
DEFVAL { 1440 }
|
|
::= { vlanVoiceOUIBased 6 }
|
|
|
|
|
|
END
|