mibs/MIBS/comware/HH3C-STACK-MIB

-- =================================================================
-- Copyright (c) 2004-2021 New H3C Tech. Co., Ltd. All rights reserved
--
-- Description: stack mib
-- Reference: STACK-MIB
-- Version: V1.5
-- History:
--   V1.0 Created by ranbin
--        Initial version 2008-04-30
--   V1.1 2012-02-24 Modified by zhengwei
--        Changed the range of link delay to 0 to 30000 ms
--   V1.2 2013-08-16 Updated by wangpengju
--        Added node hh3cStackPortForwardingPath to hh3cStackPortInfoTable
--        2013-10-23 Updated by zhengwei
--        Added notification nodes because MAD group work status changed:
--        hh3cStackMadBfdChangeNormal
--        hh3cStackMadBfdChangeFailure
--        hh3cStackMadLacpChangeNormal
--        hh3cStackMadLacpChangeFailure
--   V1.3 2014-08-11 Updated by SongHao
--        Added hh3cStackDomainId
--        2014-11-20 Updated by songhao
--        Added hh3cStackPortConfigActivate in hh3cStackGlobalConfig.
--        hh3cStackLinkDelayInterval was changed to in the range of 0 to 2147483647 ms
--   V1.4 2020-03-03 Updated by zhangwenbo
--        Added notification node hh3cStackPhysicalIntfLinkUp
--        Added notification node hh3cStackPhysicalIntfLinkDown
--        Added hh3cStackPhysicalIntfName
--   V1.5 2021-03-17 Updated by meishenhe
--        Added notification node hh3cStackPhysicalIntfRxTimeout
-- =================================================================
HH3C-STACK-MIB DEFINITIONS ::= BEGIN

IMPORTS
        hh3cCommon
    FROM HH3C-OID-MIB
        entPhysicalIndex
    FROM ENTITY-MIB
        ifIndex, ifDescr
    FROM IF-MIB
        Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Unsigned32
    FROM SNMPv2-SMI;

hh3cStack MODULE-IDENTITY
    LAST-UPDATED "202103250943Z"
    ORGANIZATION
        "New H3C Technologies Co., Ltd."
    CONTACT-INFO
        "Platform Team New H3C Technologies Co., Ltd.
         Hai-Dian District Beijing P.R. China
         Http://www.h3c.com
         Zip:100085"
    DESCRIPTION
        "This MIB is used to manage STM (Stack Topology Management)
         information for IRF (Intelligent Resilient Framework) device.
         This MIB is applicable to IRF-capable products.  Some objects in
         this MIB may be used only for some specific products, so users should
         refer to the related documents to acquire more detailed information."
    REVISION "202103250943Z"
    DESCRIPTION
        "Added notification node hh3cStackPhysicalIntfRxTimeout."
    REVISION "201411200850Z"
    DESCRIPTION
        "Added hh3cStackPortConfigActivate in hh3cStackGlobalConfig.
         hh3cStackLinkDelayInterval was changed to in the range of 0 to
         2147483647 ms."
    REVISION "201408110641Z"
    DESCRIPTION
        "Added hh3cStackDomainId."
    REVISION "201310230000Z"
    DESCRIPTION
        "Added notification nodes because MAD group work status changed:
        hh3cStackMadBfdChangeNormal
        hh3cStackMadBfdChangeFailure
        hh3cStackMadLacpChangeNormal
        hh3cStackMadLacpChangeFailure"
    REVISION "201308160000Z"
    DESCRIPTION
        "Added node hh3cStackPortForwardingPath to hh3cStackPortInfoTable."
    REVISION "201202240000Z"
    DESCRIPTION
        "Changed the range of link delay to 0 to 30000 ms."
    REVISION "200804301650Z"             -- 30th April, 2007 at 16:50 GMT
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { hh3cCommon 91 }


-- Scalar MIB objects, which are considered as global variables
-- Global Level Configuration

hh3cStackGlobalConfig OBJECT IDENTIFIER ::= { hh3cStack 1 }

hh3cStackMaxMember OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of members in a stack."
    ::= { hh3cStackGlobalConfig 1 }

hh3cStackMemberNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of members currently in a stack."
    ::= { hh3cStackGlobalConfig 2 }

hh3cStackMaxConfigPriority OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The highest priority that can be configured for a member in a stack."
    ::= { hh3cStackGlobalConfig 3 }

hh3cStackAutoUpdate OBJECT-TYPE
    SYNTAX      INTEGER
        {
            disabled(1),
            enabled(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The function for automatically updating the image from the master to
         a device that is attempting to join the stack.
         When a new device tries to join a stack, STM verifies the image
         consistency between the joining device and the master.
         If the joining device uses a different image version than the master,
         the function updates the joining device with the image of the master.
         When this function is disabled, the new device can't join the stack
         if it uses a different software version than the master.

        disabled: disable auto update function
        enabled: enable auto update function"
    ::= { hh3cStackGlobalConfig 4 }

hh3cStackMacPersistence OBJECT-TYPE
    SYNTAX      INTEGER
        {
            notPersist(1),
            persistForSixMin(2),
            persistForever(3)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The mode of bridge MAC address persistence.  When a stack starts,
         the bridge MAC address of the master is used as that of the stack.
         When the master leaves the stack, the bridge MAC address of the
         stack changes depending on the mode of bridge MAC address persistence.

        notPersist: The bridge MAC address of the new master is used
         as that of the stack immediately.
        persistForSixMin: The original bridge MAC address will be reserved for six
         minutes.  In this period, if the master that has left rejoins the stack,
         the bridge MAC address of the stack will not change.
         If the old master doesn't rejoin the stack within this period, the
         bridge MAC address of the new master will be used as that of the stack.
        persistForever: Whether the master leaves or not, the bridge MAC address
         of the stack will never change."
    ::= { hh3cStackGlobalConfig 5 }

hh3cStackLinkDelayInterval OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "millisecond"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Delay for stack ports to report a link down event.  If the link comes up
         before the delay timer expires, the stack port will not report the link
         down event.  If the link is not recovered before the delay timer expires,
         the stack port will report the change.  If the delay is set to 0,
         the stack ports will report a link down event without delay.

        0: no delay
        other value(ms): delay time"
    ::= { hh3cStackGlobalConfig 6 }

hh3cStackTopology OBJECT-TYPE
    SYNTAX      INTEGER
        {
            chainConn(1),
            ringConn(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Stack topology.

        chainConn: daisy-chain connection
        ringConn: ring connection"
    ::= { hh3cStackGlobalConfig 7 }

hh3cStackDomainId OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Domain ID of the IRF fabric that is used to uniquely identify an IRF fabric.
        Domain IDs prevent IRF fabrics from interfering with one another."
    ::= { hh3cStackGlobalConfig 8 }

hh3cStackPortConfigActivate OBJECT-TYPE
    SYNTAX INTEGER
        {
            none(1),
            set(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "After connecting the physical interfaces between two devices and
        binding them to the correct IRF ports, you must
        activate the settings on the IRF ports.  This operation merges the two
        devices into one IRF fabric.  The system activates the IRF port
        settings automatically in the following situations:
        1. The configuration file that the device starts with contains
        IRF port bindings.
        2. You are binding physical interfaces to an IRF port after an IRF fabric
        is formed.

        none: If the user sets this object to none, this object will return
              a success without performing any operation.

        set: Activates the settings on the IRF ports.
             After the settings is activated, this object will return to
             none at the next reading."
    DEFVAL { none }
    ::= { hh3cStackGlobalConfig 9 }

-- Device Level Configuration
hh3cStackDeviceConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cStackDeviceConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage device information in a stack."
    ::= { hh3cStack 2 }

hh3cStackDeviceConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cStackDeviceConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage device information in a stack."
    INDEX
        {
            entPhysicalIndex
        }
    ::= { hh3cStackDeviceConfigTable 1 }

Hh3cStackDeviceConfigEntry ::= SEQUENCE
    {
        hh3cStackMemberID          Integer32,
        hh3cStackConfigMemberID    Integer32,
        hh3cStackPriority          Integer32,
        hh3cStackPortNum           Integer32,
        hh3cStackPortMaxNum        Integer32
    }

hh3cStackMemberID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The member ID of the device in a stack."
    ::= { hh3cStackDeviceConfigEntry 1 }

hh3cStackConfigMemberID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The configured member ID of the device.  The valid value ranges from
         1 to the value in hh3cStackMaxMember.  The configured member ID will
         take effect at a reboot if it is unique within the stack."
    ::= { hh3cStackDeviceConfigEntry 2 }

hh3cStackPriority OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The priority of a device in the stack.  The valid value ranges from
         1 to the value in hh3cStackMaxConfigPriority."
    ::= { hh3cStackDeviceConfigEntry 3 }

hh3cStackPortNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of stack ports enabled on a device."
    ::= { hh3cStackDeviceConfigEntry 4 }

hh3cStackPortMaxNum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of stack ports on a device."
    ::= { hh3cStackDeviceConfigEntry 5 }


-- Board Level Configuration
hh3cStackBoardConfigTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cStackBoardConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage MPU information for a stack."
    ::= { hh3cStack 3 }

hh3cStackBoardConfigEntry OBJECT-TYPE
    SYNTAX      Hh3cStackBoardConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage MPU information for a stack."
    INDEX
        {
            entPhysicalIndex
        }
    ::= { hh3cStackBoardConfigTable 1 }

Hh3cStackBoardConfigEntry ::= SEQUENCE
    {
        hh3cStackBoardRole              INTEGER,
        hh3cStackBoardBelongtoMember    Integer32
    }

hh3cStackBoardRole OBJECT-TYPE
    SYNTAX      INTEGER
        {
            slave(1),
            master(2),
            loading(3),
            other(4)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The role of the MPU in a stack.

        slave: Standby MPU
        master: Master MPU
        loading: Standby MPU is loading the software image from the master.
        other: other"
    ::= { hh3cStackBoardConfigEntry 1 }

hh3cStackBoardBelongtoMember OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Member ID of the device that holds the current board."
    ::= { hh3cStackBoardConfigEntry 2 }


-- stack port Information
hh3cStackPortInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cStackPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage stack port information
         for IRF stacked devices."
    ::= { hh3cStack 4 }

hh3cStackPortInfoEntry OBJECT-TYPE
    SYNTAX      Hh3cStackPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage stack port information
         for IRF stacked devices."
    INDEX
        {
            hh3cStackMemberID,
            hh3cStackPortIndex
        }
    ::= { hh3cStackPortInfoTable 1 }

Hh3cStackPortInfoEntry ::= SEQUENCE
    {
        hh3cStackPortIndex     Integer32,
        hh3cStackPortEnable    INTEGER,
        hh3cStackPortStatus    INTEGER,
        hh3cStackNeighbor      Integer32,
        hh3cStackPortForwardingPath    OCTET STRING
    }

hh3cStackPortIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The index of a stack port of the device."
    ::= { hh3cStackPortInfoEntry 1 }

hh3cStackPortEnable OBJECT-TYPE
    SYNTAX      INTEGER
        {
            disabled(1),
            enabled(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The status of a stack port of the device.  If no physical
         interfaces are added to the stack port, its status is disabled.
         If the stack port has physical interfaces, its status is enabled.

        disabled: The stack port is disabled.
        enabled: The stack port is enabled."
    ::= { hh3cStackPortInfoEntry 2 }

hh3cStackPortStatus OBJECT-TYPE
    SYNTAX      INTEGER
        {
            up(1),
            down(2),
            silent(3),
            disabled(4)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The link status of a stack port on the device.

        up: A physical link is present on the stack port.
        down: No physical link is present on the stack port.
        silent: The link state of the stack port is up,
                but the port can't transmit or receive traffic.
        disabled: The stack port doesn't contain physical links."
    ::= { hh3cStackPortInfoEntry 3 }

hh3cStackNeighbor OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The member ID of the stack port's neighbor.  0 means no
         neighbor exists."
    ::= { hh3cStackPortInfoEntry 4 }

hh3cStackPortForwardingPath OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..511))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "List of egress member IDs on a stack port.
         Each member device uses the egress member ID lists to choose the outgoing
         stack port for known unicast frames to be sent out of other member devices.
         The egress member ID lists are comma separated.
         A zero-length string means no egress members exist.

         For example:
           In a ring stack of 1-2-3-4-5-7-1,
           if hh3cStackPortForwardingPath.1.1 returns '7,5,4',
           IRF-port 1/1 will be the outgoing port for frames to reach members 7, 5,
           and 4 from member 1."
    ::= { hh3cStackPortInfoEntry 5 }

-- Physical interface Information
hh3cStackPhyPortInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF Hh3cStackPhyPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage information about physical
         interfaces that can be used for IRF stacking."
    ::= { hh3cStack 5 }

hh3cStackPhyPortInfoEntry OBJECT-TYPE
    SYNTAX      Hh3cStackPhyPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to manage information about physical
         interfaces that can be used for IRF stacking."
    INDEX
        {
            entPhysicalIndex
        }
    ::= { hh3cStackPhyPortInfoTable 1 }

Hh3cStackPhyPortInfoEntry ::= SEQUENCE
    {
        hh3cStackBelongtoPort    Integer32
    }

hh3cStackBelongtoPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The index of the stack port to which the physical interface is added.
         0 means the physical interface is not added to any stack port.
         The value will take effect when IRF is enabled on the device."
    ::= { hh3cStackPhyPortInfoEntry 1 }

--
-- Notification definitions
--
-- =================================================================
-- Traps are defined below.
hh3cStackTrap OBJECT IDENTIFIER ::= { hh3cStack 6 }

hh3cStackTrapOjbects OBJECT IDENTIFIER ::= { hh3cStackTrap 0 }
-- All trap definitions should be placed under this object.

hh3cStackPortLinkStatusChange  NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cStackMemberID,
            hh3cStackPortIndex,
            hh3cStackPortStatus
        }

    STATUS      current
    DESCRIPTION
        "The hh3cStackPortLinkStatusChange trap indicates that the link status
         of the stack port has changed."
    ::= { hh3cStackTrapOjbects 1 }

hh3cStackTopologyChange  NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cStackTopology
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackTopologyChange trap indicates that the topology type of
         the IRF stack has changed."
    ::= { hh3cStackTrapOjbects 2 }

hh3cStackMadBfdChangeNormal NOTIFICATION-TYPE
    OBJECTS
        {
            ifIndex,
            ifDescr
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackMadBfdChangeNormal trap indicates that the BFD MAD function
        changed to the normal state."
    ::= { hh3cStackTrapOjbects 3 }

hh3cStackMadBfdChangeFailure NOTIFICATION-TYPE
    OBJECTS
        {
            ifIndex,
            ifDescr
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackMadBfdChangeFailure trap indicates that the BFD MAD function
        changed to the failure state."
    ::= { hh3cStackTrapOjbects 4 }

hh3cStackMadLacpChangeNormal NOTIFICATION-TYPE
    OBJECTS
        {
            ifIndex,
            ifDescr
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackMadLacpChangeNormal trap indicates that the LACP MAD function
        changed to the normal state."
    ::= { hh3cStackTrapOjbects 5 }

hh3cStackMadLacpChangeFailure NOTIFICATION-TYPE
    OBJECTS
        {
            ifIndex,
            ifDescr
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackMadLacpChangeFailure trap indicates that the LACP MAD function
        changed to the failure state."
    ::= { hh3cStackTrapOjbects 6 }

hh3cStackPhysicalIntfLinkUp NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cStackMemberID,
            hh3cStackPortIndex,
            hh3cStackPhysicalIntfName
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackPhysicalIntfLinkUp trap indicates that the status
         of the stack physical interface has changed to the up state."
    ::= { hh3cStackTrapOjbects 7 }

hh3cStackPhysicalIntfLinkDown NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cStackMemberID,
            hh3cStackPortIndex,
            hh3cStackPhysicalIntfName
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackPhysicalIntfLinkDown trap indicates that the status
         of the stack physical interface has changed to the down state."
    ::= { hh3cStackTrapOjbects 8 }

hh3cStackPhysicalIntfRxTimeout NOTIFICATION-TYPE
    OBJECTS
        {
            hh3cStackMemberID,
            hh3cStackPortIndex,
            hh3cStackPhysicalIntfName
        }
    STATUS      current
    DESCRIPTION
        "The hh3cStackPhysicalIntfRxTimeout trap indicates that the timer for the stack
         physical interface to receive packets has timed out."
    ::= { hh3cStackTrapOjbects 9 }

hh3cStackTrapObjectDefinitions OBJECT IDENTIFIER ::= { hh3cStackTrap 1 }
-- All objects used for TRAP only are defined here.

hh3cStackPhysicalIntfName OBJECT-TYPE
    SYNTAX         OCTET STRING (SIZE(1..255))
    MAX-ACCESS     accessible-for-notify
    STATUS         current
    DESCRIPTION
        "The textual name of the stack physical interface."
    ::= { hh3cStackTrapObjectDefinitions 1 }

END