david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/dlink/DLINKSW-DHCP-RELAY-MIB

913 lines
38 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-DHCP-RELAY-MIB.mib : DHCP Relay MIB
--
-- Copyright (c) 2012 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString,
TruthValue,
RowStatus
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB
Dlink2kVlanList
FROM DLINKSW-TC-MIB;
dlinkSwDhcpRelayMIB MODULE-IDENTITY
LAST-UPDATED "201309260000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for BOOTP/DHCP relay."
REVISION "201307190000Z"
DESCRIPTION
"This is the first version of the MIB file for 'BOOTP/DHCP Relay'
functionality."
REVISION "201309090000Z"
DESCRIPTION
"1.Update dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length(Note:follow UIS).
2.Remove dDhcpRIfIgnoreBootpRowStatus and add dDhcpRIfIgnoreBootpEnabled(Note:follow IP interface).
3.Remove dDhcpRIfAgentInfoChkRowStatus and modify dDhcpRIfAgentInfoChkState SYNTAX(Note:follow IP interface).
4.Remove dDhcpRIfAgentInfoInsertRowStatus and modify dDhcpRIfAgentInfoInsertState SYNTAX(Note:follow IP interface).
5.Remove dDhcpRIfAgentInfoPolicyRowStatus(Note:follow IP interface).
6.Remove dDhcpRIfAgentInfoTrustRowStatus and add dDhcpRIfAgentInfoTrustEnabled(Note:follow IP interface)."
REVISION "201309260000Z"
DESCRIPTION
"1.Modify dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length for IWL test.
2.Update dDhcpRVlanLocalRelayCrlSecond2K description "
::= { dlinkIndustrialCommon 23 }
-- -----------------------------------------------------------------------------
dDhcpRelayMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 0 }
dDhcpRelayMIBObjects OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 1 }
dDhcpRelayMIBConformance OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 2 }
-- -----------------------------------------------------------------------------
dDhcpRelayGeneral OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 1 }
dDhcpRelayAgentInfoCheckEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the DHCP relay agent validates the
relay agent information option in the received DHCP reply packet."
DEFVAL { false }
::= { dDhcpRelayGeneral 1 }
dDhcpRelayAgentInfoInsertEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the DHCP relay agent inserts relay
agent information option (option 82)."
DEFVAL { false }
::= { dDhcpRelayGeneral 2 }
dDhcpRelayAgentInfoPolicy OBJECT-TYPE
SYNTAX INTEGER { drop(1), keep(2), replace(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the re-forwarding policy of DHCP relay agent
information option 82.
drop (1) - discards the packet that already has the relay
option.
keep (2) - the DHCP requests packet that already has the relay
option is left unchanged and directly relayed to the
DHCP server.
replace (3) - the DHCP requests packet that already has the relay
option will be replaced by a new option."
DEFVAL { keep }
::= { dDhcpRelayGeneral 3 }
dDhcpRelayInfoTrustAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the DHCP relay agent trusts the DHCP
relay information for all interfaces."
DEFVAL { false }
::= { dDhcpRelayGeneral 4 }
dDhcpRelaySmartRelay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of smart relay function.
By default, the relay agent sets the gateway address field of the
packet to the primary address of the interface. When the received
interface of the packet has secondary addresses and smart relay is
enabled, relay agent will count the number that a client retries
sending of the DISCOVER message. The relay agent will switch the
gateway address to secondary address of the received interface
after three retries. "
DEFVAL { false }
::= { dDhcpRelayGeneral 5 }
dDhcpROption82RemoteIdType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
userDefined(2),
vendor2(4),
vendor3(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of remote ID sub-option.
default(1) - MAC address of VLAN 1.
userDefined(2) - The value of dDhcpROption82RemoteID is used.
vendor2(4) - System Name.
vendor3(5) - The value of dDhcpRPortIfOp82RemIdVendor3Cfg
of the corresponding entry is used."
::= { dDhcpRelayGeneral 6 }
dDhcpROption82RemoteIdUserDef OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the global user defined string as the remote
ID of the device.
This object can be modified when dDhcpROption82RemoteIdType is set
to 'userDefined'.
When read, a zero length string is returned when dDhcpROption82RemoteIdType
is not 'userDefined'."
::= { dDhcpRelayGeneral 7 }
dDhcpROption82CircuitIdType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
userDefined(2),
vendor1(3),
vendor2(4),
vendor3(5),
vendor4(6),
vendor5(7),
vendor6(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of circuit ID sub-option.
default(1) - VLAN ID, Module ID and Port Number.
userDefined(2) - The value of dDhcpROption82CircuitID is used.
vendor1(3) - VLAN ID, Slot ID, Port Number and MAC address of VLAN 1.
vendor2(4) - Port Number.
vendor3(5) - The value of dDhcpRPortIfOp82CirIdVendor3Cfg
of the corresponding entry is used.
vendor4(6) - System Name, Module ID, Port Number and Client's VLAN ID.
vendor5(7) - System Name, 'eth', Chassis ID, Slot ID, Port
Number and Client's VLAN ID.
vendor6(8) - 'Ethernet', Chassis ID, Slot ID, Port
Number, Client's VLAN ID and System Name.
"
::= { dDhcpRelayGeneral 8 }
dDhcpROption82CircuitIdUserDef OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the global user defined string as the circuit ID.
This object can be modified when dDhcpROption82CircuitIdType is set
to 'userDefined'.
When read, a zero length string is returned when dDhcpROption82CircuitIdType
is not 'userDefined'."
::= { dDhcpRelayGeneral 9 }
-- -----------------------------------------------------------------------------
-- -----------------------------------------------------------------------------
dDhcpRPoolObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 2 }
dDhcpRPoolClassRelayTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRPoolClassRelayTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains relay target class configuration for DHCP pools."
::= { dDhcpRPoolObjects 1 }
dDhcpRPoolClassRelayTargetEntry OBJECT-TYPE
SYNTAX DDhcpRPoolClassRelayTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"By using DHCP class, DHCP relay uses option configuration to further
determine which DHCP relay target for relaying the packet that
matches the value pattern of option defined in the class."
INDEX {
dDhcpRPoClRelayTargetPoolName,
dDhcpRPoClRelayTargetClassName,
dDhcpRPoClRelayTargetVrfName,
dDhcpRPoClRelayTargetAddr }
::= { dDhcpRPoolClassRelayTargetTable 1 }
DDhcpRPoolClassRelayTargetEntry ::= SEQUENCE {
dDhcpRPoClRelayTargetPoolName DisplayString,
dDhcpRPoClRelayTargetClassName DisplayString,
dDhcpRPoClRelayTargetVrfName DisplayString,
dDhcpRPoClRelayTargetAddr IpAddress,
dDhcpRPoClRelayTargetRowStatus RowStatus
}
dDhcpRPoClRelayTargetPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName."
REFERENCE
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
::= { dDhcpRPoolClassRelayTargetEntry 1 }
dDhcpRPoClRelayTargetClassName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a DHCP class.
The value must be same as an entry in dDhcpSClassTable identified by
dDhcpSClassName."
REFERENCE
"dDhcpSClassName is defined in DLINKSW-DHCP-SERVER-MIB."
::= { dDhcpRPoolClassRelayTargetEntry 2 }
dDhcpRPoClRelayTargetVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of virtual routing and forwarding (VRF).
If this object is a zero length string, the relay target is in
global routing and forwarding space."
::= { dDhcpRPoolClassRelayTargetEntry 3 }
dDhcpRPoClRelayTargetAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the target server for
the class."
::= { dDhcpRPoolClassRelayTargetEntry 4 }
dDhcpRPoClRelayTargetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object manages this entry."
::= { dDhcpRPoolClassRelayTargetEntry 99 }
-- -----------------------------------------------------------------------------
dDhcpRPoolRelayDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRPoolRelayDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains DHCP relay destination IP address of DHCP
pools."
::= { dDhcpRPoolObjects 2 }
dDhcpRPoolRelayDestEntry OBJECT-TYPE
SYNTAX DDhcpRPoolRelayDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"By using DHCP class, DHCP relay uses option configuration to further
determine which IP addresses to allocate to clients."
INDEX {
dDhcpRPoolRelayDestPoolName,
dDhcpRPoolRelayDestVrfName,
dDhcpRPoolRelayDestAddr }
::= { dDhcpRPoolRelayDestTable 1 }
DDhcpRPoolRelayDestEntry ::= SEQUENCE {
dDhcpRPoolRelayDestPoolName DisplayString,
dDhcpRPoolRelayDestVrfName DisplayString,
dDhcpRPoolRelayDestAddr IpAddress,
dDhcpRPoolRelayDestRowStatus RowStatus
}
dDhcpRPoolRelayDestPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName."
REFERENCE
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
::= { dDhcpRPoolRelayDestEntry 1 }
dDhcpRPoolRelayDestVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of virtual routing and forwarding(VRF).
If this object is a zero length string, the destination DHCP server
IP address is in global routing and forwarding space."
::= { dDhcpRPoolRelayDestEntry 2 }
dDhcpRPoolRelayDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP address of the relay destination for
the pool."
::= { dDhcpRPoolRelayDestEntry 3 }
dDhcpRPoolRelayDestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object manages this entry."
::= { dDhcpRPoolRelayDestEntry 99 }
-- -----------------------------------------------------------------------------
dDhcpRPoolRelaySourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRPoolRelaySourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the configuration of the source subnet that
the client packets come from."
::= { dDhcpRPoolObjects 3 }
dDhcpRPoolRelaySourceEntry OBJECT-TYPE
SYNTAX DDhcpRPoolRelaySourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry identifying a surce subnet that the client packets come
from."
INDEX {
dDhcpRPoolRelaySourcePoolName,
dDhcpRPoolRelaySourceSubnet,
dDhcpRPoolRelaySourceSubnetMask
}
::= { dDhcpRPoolRelaySourceTable 1 }
DDhcpRPoolRelaySourceEntry ::= SEQUENCE {
dDhcpRPoolRelaySourcePoolName DisplayString,
dDhcpRPoolRelaySourceSubnet IpAddress,
dDhcpRPoolRelaySourceSubnetMask IpAddress,
dDhcpRPoolRelaySourceRowStatus RowStatus
}
dDhcpRPoolRelaySourcePoolName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName."
REFERENCE
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
::= { dDhcpRPoolRelaySourceEntry 1 }
dDhcpRPoolRelaySourceSubnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source subnet of the client packets
come from of the corresponding entry."
::= { dDhcpRPoolRelaySourceEntry 2 }
dDhcpRPoolRelaySourceSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the network mask of the source subnet
for the corresponding entry."
::= { dDhcpRPoolRelaySourceEntry 3 }
dDhcpRPoolRelaySourceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object manages this entry."
::= { dDhcpRPoolRelaySourceEntry 99}
-- -----------------------------------------------------------------------------
dDhcpRelayIfObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 3 }
dDhcpRIfIgnoreBootpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRIfIgnoreBootpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configurations about the BOOTP/DHCP relay will ignore
BOOTP packet on an interface.
An entry is created/removed when ignoring the BOOTP request
packets is enabled or disabled on an interface via CLI or by
issuing appropriate sets to this table using snmp. "
::= { dDhcpRelayIfObjects 1 }
dDhcpRIfIgnoreBootpEntry OBJECT-TYPE
SYNTAX DDhcpRIfIgnoreBootpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dDhcpRelayAddrTable."
INDEX { dDhcpRIfIgnoreBootpIfIndex }
::= { dDhcpRIfIgnoreBootpTable 1 }
DDhcpRIfIgnoreBootpEntry ::= SEQUENCE {
dDhcpRIfIgnoreBootpIfIndex InterfaceIndex,
dDhcpRIfIgnoreBootpEnabled TruthValue
}
dDhcpRIfIgnoreBootpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object."
::= { dDhcpRIfIgnoreBootpEntry 1 }
dDhcpRIfIgnoreBootpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the interface ignore the bootp packet or not."
::= { dDhcpRIfIgnoreBootpEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRIfAgentInfoChkTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoChkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configurations about the DHCP relay validates the
relay agent information (option 82) in the received DHCP reply packet
on an interface.
An entry is created/removed when checking option 82 is or not configured
on an interface via CLI or by issuing appropriate sets to this table
using snmp.
If checking option 82 is not configured for an interface, the global
setting, dDhcpRelayAgentInfoCheckEnabled takes effect. If checking
option 82 is configured for an interface, the interface setting takes
effect."
::= { dDhcpRelayIfObjects 2 }
dDhcpRIfAgentInfoChkEntry OBJECT-TYPE
SYNTAX DDhcpRIfAgentInfoChkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dDhcpRIfInfoChkTable."
INDEX { dDhcpRIfAgentInfoChkIfIndex }
::= { dDhcpRIfAgentInfoChkTable 1 }
DDhcpRIfAgentInfoChkEntry ::= SEQUENCE {
dDhcpRIfAgentInfoChkIfIndex InterfaceIndex,
dDhcpRIfAgentInfoChkState INTEGER
}
dDhcpRIfAgentInfoChkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object."
::= { dDhcpRIfAgentInfoChkEntry 1 }
dDhcpRIfAgentInfoChkState OBJECT-TYPE
SYNTAX INTEGER{enabled(1), disabled(2), none(3)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the DHCP relay agent validates the
relay agent information option in the received DHCP reply packet
on the corresponding interface."
::= { dDhcpRIfAgentInfoChkEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRIfAgentInfoInsertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoInsertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configurations about whether insert option 82 for
an interface during relay of DHCP request packets.
An entry is created/removed when the insertion of
option 82 is or not configured on an interface via CLI
or by issuing appropriate sets to this table using snmp.
If the insertion of option 82 is not configured for an interface,
the global setting, dDhcpRelayAgentInfoInsertEnabled takes effect. If checking
option 82 is configured for an interface, the interface setting takes
effect."
::= { dDhcpRelayIfObjects 3 }
dDhcpRIfAgentInfoInsertEntry OBJECT-TYPE
SYNTAX DDhcpRIfAgentInfoInsertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dDhcpRIfAgentInfoInsertTable."
INDEX { dDhcpRIfAgentInfoInsertIfIndex }
::= { dDhcpRIfAgentInfoInsertTable 1 }
DDhcpRIfAgentInfoInsertEntry ::= SEQUENCE {
dDhcpRIfAgentInfoInsertIfIndex InterfaceIndex,
dDhcpRIfAgentInfoInsertState INTEGER
}
dDhcpRIfAgentInfoInsertIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object."
::= { dDhcpRIfAgentInfoInsertEntry 1 }
dDhcpRIfAgentInfoInsertState OBJECT-TYPE
SYNTAX INTEGER{enabled(1), disabled(2), none(3)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether insert option 82 for an interface
during relay of DHCP request packets."
::= { dDhcpRIfAgentInfoInsertEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRIfAgentInfoPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configurations about relay agent information
re-forwarding policy for the DHCP relay agent on an interface.
An entry is created/removed when the re-forwarding policy
is or not configured on an interface via CLI
or by issuing appropriate sets to this table using snmp.
If the re-forwarding policy is not configured for an interface,
the global setting, dDhcpRelayAgentInfoPolicy takes effect. If
re-forwarding policy is configured for an interface, the interface
setting takes effect."
::= { dDhcpRelayIfObjects 4 }
dDhcpRIfAgentInfoPolicyEntry OBJECT-TYPE
SYNTAX DDhcpRIfAgentInfoPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dDhcpRIfAgentInfoPolicyTable."
INDEX { dDhcpRIfAgentInfoPolicyIfIndex }
::= { dDhcpRIfAgentInfoPolicyTable 1 }
DDhcpRIfAgentInfoPolicyEntry ::= SEQUENCE {
dDhcpRIfAgentInfoPolicyIfIndex InterfaceIndex,
dDhcpRIfAgentInfoPolicyAction INTEGER
}
dDhcpRIfAgentInfoPolicyIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object."
::= { dDhcpRIfAgentInfoPolicyEntry 1 }
dDhcpRIfAgentInfoPolicyAction OBJECT-TYPE
SYNTAX INTEGER { drop(1), keep(2), replace(3), none(4)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the re-forwarding policy of DHCP relay agent
information option 82 for the corresponding interface.
drop (1) - discards the packet that already has the relay
option.
keep (2) - the DHCP requests packet that already has the relay
option is left unchanged and directly relayed to the
DHCP server.
replace (3) - the DHCP requests packet that already has the relay
option will be replaced by a new option.
none (4) - not configure the policy action on the interface. "
::= { dDhcpRIfAgentInfoPolicyEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRIfAgentInfoTrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configurations about the relay agent trusts the relay
information on an interface.
An entry is created/removed when the trusting relay information
is enabled/disabled on an interface via CLI or by issuing
appropriate sets to this table using snmp.
If dDhcpRelayInfoTrustAll is 'true', the dhcp relay information is
trusted for all interfaces. If dDhcpRelayInfoTrustAll is 'false',
the trust state on an interface is determined whether
the corresponding interface exists in this table. If exists, the
corresponding interface is trusted, otherwise, the interface is not
trusted.
When relay information is trusted on an interface, the
arriving packets with giaddr==0 (this relay agent is the first
relay of this DHCP request packet) but with relay agent information
option present will be accepted. If it is un-trusted, these packets
will be dropped."
::= { dDhcpRelayIfObjects 5 }
dDhcpRIfAgentInfoTrustEntry OBJECT-TYPE
SYNTAX DDhcpRIfAgentInfoTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the dDhcpRIfAgentInfoTrustTable."
INDEX { dDhcpRIfAgentInfoTrustIfIndex }
::= { dDhcpRIfAgentInfoTrustTable 1 }
DDhcpRIfAgentInfoTrustEntry ::= SEQUENCE {
dDhcpRIfAgentInfoTrustIfIndex InterfaceIndex,
dDhcpRIfAgentInfoTrustEnabled TruthValue
}
dDhcpRIfAgentInfoTrustIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object."
::= { dDhcpRIfAgentInfoTrustEntry 1 }
dDhcpRIfAgentInfoTrustEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the interface is trusted on
the not."
::= { dDhcpRIfAgentInfoTrustEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRelayPortIfOption82Objects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 4 }
dDhcpRPortIfOp82RemIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRPortIfOp82RemIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the remote ID sub-option of Option 82
for physical port or port channel interface."
::={ dDhcpRelayPortIfOption82Objects 1}
dDhcpRPortIfOp82RemIdEntry OBJECT-TYPE
SYNTAX DDhcpRPortIfOp82RemIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in dDhcpRPortIfOption82RemIdTable containing the
configuration about the remote ID sub-option of Option 82 for the
corresponding interface."
INDEX { dDhcpRPortIfOp82RemIdIfIndex }
::={ dDhcpRPortIfOp82RemIdTable 1 }
DDhcpRPortIfOp82RemIdEntry ::= SEQUENCE{
dDhcpRPortIfOp82RemIdIfIndex InterfaceIndex,
dDhcpRPortIfOp82RemIdVendor3Cfg DisplayString
}
dDhcpRPortIfOp82RemIdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ifIndex value of the port or port channel.
Only physical port and port channel interface will appear in this
table."
::= { dDhcpRPortIfOp82RemIdEntry 1 }
dDhcpRPortIfOp82RemIdVendor3Cfg OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the per port/port channel user defined
string as remote ID.
This object is used when dDhcpROption82RemoteIdType is set to
'vendor3'."
::= { dDhcpRPortIfOp82RemIdEntry 2 }
dDhcpRPortIfOp82CirIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF DDhcpRPortIfOp82CirIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to manage the circuit ID sub-option of Option 82
for physical port or port channel interface."
::={ dDhcpRelayPortIfOption82Objects 2}
dDhcpRPortIfOp82CirIdEntry OBJECT-TYPE
SYNTAX DDhcpRPortIfOp82CirIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in dDhcpRPortIfOp82CirIdTable containing the
configuration about the circuit ID sub-option of Option 82 for the
corresponding interface."
INDEX { dDhcpRPortIfOp82CirIdIfIndex}
::={ dDhcpRPortIfOp82CirIdTable 1 }
DDhcpRPortIfOp82CirIdEntry ::= SEQUENCE{
dDhcpRPortIfOp82CirIdIfIndex InterfaceIndex,
dDhcpRPortIfOp82CirIdVendor3Cfg DisplayString
}
dDhcpRPortIfOp82CirIdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ifIndex value of the port or port channel.
Only physical port and port channel interface will appear in this
table."
::= { dDhcpRPortIfOp82CirIdEntry 1 }
dDhcpRPortIfOp82CirIdVendor3Cfg OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the per port/port channel user defined
string as circuit ID.
This object is used when dDhcpROption82CircuitIdType is set to
'vendor3'."
::= { dDhcpRPortIfOp82CirIdEntry 2 }
-- -----------------------------------------------------------------------------
dDhcpRelayVlanObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 5 }
dDhcpRVlanLocalRelayCrlFirst2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the DHCP Local Relay enabled VLAN in a
string of octets containing one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay.
"
::= { dDhcpRelayVlanObjects 1 }
dDhcpRVlanLocalRelayCrlSecond2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the DHCP Local Relay enabled VLAN in a
string of octets containing one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay.
"
::= { dDhcpRelayVlanObjects 2 }
-- -----------------------------------------------------------------------------
-- ***************************************************************************
-- Conformance
-- ***************************************************************************
dDhcpRelayCompliances OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 1 }
dDhcpRelayCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINK-DHCP-RELAY-IPV4-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dDhcpRGblCfgGroup,
dDhcpRPoolCfgGroup,
dDhcpRInterfaceGroup
}
GROUP dDhcpROp82SuboptionGroup
DESCRIPTION
"This group is required only for implementations that support
sub-options configuration of option 82."
GROUP dDhcpRVlanCfgGroup
DESCRIPTION
"This group is required only for implementations that support
DHCP Local Relay for per VLAN."
::= { dDhcpRelayCompliances 1 }
dDhcpRelayGroups OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 2 }
dDhcpRGblCfgGroup OBJECT-GROUP
OBJECTS {
dDhcpRelayAgentInfoCheckEnabled,
dDhcpRelayAgentInfoInsertEnabled,
dDhcpRelayAgentInfoPolicy,
dDhcpRelayInfoTrustAll,
dDhcpRelaySmartRelay
}
STATUS current
DESCRIPTION
"A collection of objects providing global configuration about DHCP
relay."
::= { dDhcpRelayGroups 1 }
dDhcpRPoolCfgGroup OBJECT-GROUP
OBJECTS {
dDhcpRPoClRelayTargetRowStatus,
dDhcpRPoolRelayDestRowStatus,
dDhcpRPoolRelaySourceRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing DHCP pool configuration."
::= { dDhcpRelayGroups 2 }
dDhcpRInterfaceGroup OBJECT-GROUP
OBJECTS {
dDhcpRIfIgnoreBootpEnabled,
dDhcpRIfAgentInfoChkState,
dDhcpRIfAgentInfoInsertState,
dDhcpRIfAgentInfoPolicyAction,
dDhcpRIfAgentInfoTrustEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing per interface configuration of
DHCP Relay."
::= { dDhcpRelayGroups 3 }
dDhcpROp82SuboptionGroup OBJECT-GROUP
OBJECTS {
dDhcpROption82RemoteIdType,
dDhcpROption82RemoteIdUserDef,
dDhcpROption82CircuitIdType,
dDhcpROption82CircuitIdUserDef,
dDhcpRPortIfOp82RemIdVendor3Cfg,
dDhcpRPortIfOp82CirIdVendor3Cfg
}
STATUS current
DESCRIPTION
"A collection of objects providing sub-options configuration of option 82."
::= { dDhcpRelayGroups 4 }
dDhcpRVlanCfgGroup OBJECT-GROUP
OBJECTS {
dDhcpRVlanLocalRelayCrlFirst2K,
dDhcpRVlanLocalRelayCrlSecond2K
}
STATUS current
DESCRIPTION
"A collection of objects which are used to configure as
well as show information regarding the feature enabling
on each VLAN."
::= { dDhcpRelayGroups 5 }
END
Reference in New Issue Copy Permalink