913 lines
38 KiB
Plaintext
913 lines
38 KiB
Plaintext
-- *****************************************************************
|
|
-- DLINKSW-DHCP-RELAY-MIB.mib : DHCP Relay MIB
|
|
--
|
|
-- Copyright (c) 2012 D-Link Corporation, all rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
DLINKSW-DHCP-RELAY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
DisplayString,
|
|
TruthValue,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
dlinkIndustrialCommon
|
|
FROM DLINK-ID-REC-MIB
|
|
Dlink2kVlanList
|
|
FROM DLINKSW-TC-MIB;
|
|
|
|
|
|
dlinkSwDhcpRelayMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201309260000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
" D-Link Corporation
|
|
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
|
Taipei City 114, Taiwan, R.O.C
|
|
Tel: +886-2-66000123
|
|
E-mail: tsd@dlink.com.tw
|
|
"
|
|
DESCRIPTION
|
|
"This MIB module defines objects for BOOTP/DHCP relay."
|
|
|
|
REVISION "201307190000Z"
|
|
DESCRIPTION
|
|
"This is the first version of the MIB file for 'BOOTP/DHCP Relay'
|
|
functionality."
|
|
|
|
REVISION "201309090000Z"
|
|
DESCRIPTION
|
|
"1.Update dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length(Note:follow UIS).
|
|
2.Remove dDhcpRIfIgnoreBootpRowStatus and add dDhcpRIfIgnoreBootpEnabled(Note:follow IP interface).
|
|
3.Remove dDhcpRIfAgentInfoChkRowStatus and modify dDhcpRIfAgentInfoChkState SYNTAX(Note:follow IP interface).
|
|
4.Remove dDhcpRIfAgentInfoInsertRowStatus and modify dDhcpRIfAgentInfoInsertState SYNTAX(Note:follow IP interface).
|
|
5.Remove dDhcpRIfAgentInfoPolicyRowStatus(Note:follow IP interface).
|
|
6.Remove dDhcpRIfAgentInfoTrustRowStatus and add dDhcpRIfAgentInfoTrustEnabled(Note:follow IP interface)."
|
|
|
|
REVISION "201309260000Z"
|
|
DESCRIPTION
|
|
"1.Modify dDhcpROption82RemoteIdUserDef and dDhcpROption82CircuitIdUserDef value length for IWL test.
|
|
2.Update dDhcpRVlanLocalRelayCrlSecond2K description "
|
|
|
|
::= { dlinkIndustrialCommon 23 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRelayMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 0 }
|
|
dDhcpRelayMIBObjects OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 1 }
|
|
dDhcpRelayMIBConformance OBJECT IDENTIFIER ::= { dlinkSwDhcpRelayMIB 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRelayGeneral OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 1 }
|
|
|
|
dDhcpRelayAgentInfoCheckEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the DHCP relay agent validates the
|
|
relay agent information option in the received DHCP reply packet."
|
|
DEFVAL { false }
|
|
::= { dDhcpRelayGeneral 1 }
|
|
|
|
dDhcpRelayAgentInfoInsertEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the DHCP relay agent inserts relay
|
|
agent information option (option 82)."
|
|
DEFVAL { false }
|
|
::= { dDhcpRelayGeneral 2 }
|
|
|
|
dDhcpRelayAgentInfoPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER { drop(1), keep(2), replace(3)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the re-forwarding policy of DHCP relay agent
|
|
information option 82.
|
|
drop (1) - discards the packet that already has the relay
|
|
option.
|
|
keep (2) - the DHCP requests packet that already has the relay
|
|
option is left unchanged and directly relayed to the
|
|
DHCP server.
|
|
replace (3) - the DHCP requests packet that already has the relay
|
|
option will be replaced by a new option."
|
|
DEFVAL { keep }
|
|
::= { dDhcpRelayGeneral 3 }
|
|
|
|
dDhcpRelayInfoTrustAll OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the DHCP relay agent trusts the DHCP
|
|
relay information for all interfaces."
|
|
DEFVAL { false }
|
|
::= { dDhcpRelayGeneral 4 }
|
|
|
|
dDhcpRelaySmartRelay OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of smart relay function.
|
|
By default, the relay agent sets the gateway address field of the
|
|
packet to the primary address of the interface. When the received
|
|
interface of the packet has secondary addresses and smart relay is
|
|
enabled, relay agent will count the number that a client retries
|
|
sending of the DISCOVER message. The relay agent will switch the
|
|
gateway address to secondary address of the received interface
|
|
after three retries. "
|
|
DEFVAL { false }
|
|
::= { dDhcpRelayGeneral 5 }
|
|
|
|
dDhcpROption82RemoteIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
userDefined(2),
|
|
vendor2(4),
|
|
vendor3(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of remote ID sub-option.
|
|
default(1) - MAC address of VLAN 1.
|
|
userDefined(2) - The value of dDhcpROption82RemoteID is used.
|
|
vendor2(4) - System Name.
|
|
vendor3(5) - The value of dDhcpRPortIfOp82RemIdVendor3Cfg
|
|
of the corresponding entry is used."
|
|
::= { dDhcpRelayGeneral 6 }
|
|
|
|
dDhcpROption82RemoteIdUserDef OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the global user defined string as the remote
|
|
ID of the device.
|
|
This object can be modified when dDhcpROption82RemoteIdType is set
|
|
to 'userDefined'.
|
|
When read, a zero length string is returned when dDhcpROption82RemoteIdType
|
|
is not 'userDefined'."
|
|
::= { dDhcpRelayGeneral 7 }
|
|
|
|
dDhcpROption82CircuitIdType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(1),
|
|
userDefined(2),
|
|
vendor1(3),
|
|
vendor2(4),
|
|
vendor3(5),
|
|
vendor4(6),
|
|
vendor5(7),
|
|
vendor6(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of circuit ID sub-option.
|
|
default(1) - VLAN ID, Module ID and Port Number.
|
|
userDefined(2) - The value of dDhcpROption82CircuitID is used.
|
|
vendor1(3) - VLAN ID, Slot ID, Port Number and MAC address of VLAN 1.
|
|
vendor2(4) - Port Number.
|
|
vendor3(5) - The value of dDhcpRPortIfOp82CirIdVendor3Cfg
|
|
of the corresponding entry is used.
|
|
vendor4(6) - System Name, Module ID, Port Number and Client's VLAN ID.
|
|
vendor5(7) - System Name, 'eth', Chassis ID, Slot ID, Port
|
|
Number and Client's VLAN ID.
|
|
vendor6(8) - 'Ethernet', Chassis ID, Slot ID, Port
|
|
Number, Client's VLAN ID and System Name.
|
|
"
|
|
::= { dDhcpRelayGeneral 8 }
|
|
|
|
dDhcpROption82CircuitIdUserDef OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the global user defined string as the circuit ID.
|
|
This object can be modified when dDhcpROption82CircuitIdType is set
|
|
to 'userDefined'.
|
|
When read, a zero length string is returned when dDhcpROption82CircuitIdType
|
|
is not 'userDefined'."
|
|
::= { dDhcpRelayGeneral 9 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRPoolObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 2 }
|
|
|
|
dDhcpRPoolClassRelayTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRPoolClassRelayTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains relay target class configuration for DHCP pools."
|
|
::= { dDhcpRPoolObjects 1 }
|
|
|
|
dDhcpRPoolClassRelayTargetEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRPoolClassRelayTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By using DHCP class, DHCP relay uses option configuration to further
|
|
determine which DHCP relay target for relaying the packet that
|
|
matches the value pattern of option defined in the class."
|
|
INDEX {
|
|
dDhcpRPoClRelayTargetPoolName,
|
|
dDhcpRPoClRelayTargetClassName,
|
|
dDhcpRPoClRelayTargetVrfName,
|
|
dDhcpRPoClRelayTargetAddr }
|
|
::= { dDhcpRPoolClassRelayTargetTable 1 }
|
|
|
|
DDhcpRPoolClassRelayTargetEntry ::= SEQUENCE {
|
|
dDhcpRPoClRelayTargetPoolName DisplayString,
|
|
dDhcpRPoClRelayTargetClassName DisplayString,
|
|
dDhcpRPoClRelayTargetVrfName DisplayString,
|
|
dDhcpRPoClRelayTargetAddr IpAddress,
|
|
dDhcpRPoClRelayTargetRowStatus RowStatus
|
|
}
|
|
|
|
dDhcpRPoClRelayTargetPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a DHCP pool.
|
|
The value must be same as an entry in dDhcpSPoolTable identified by
|
|
dDhcpSPoolName."
|
|
REFERENCE
|
|
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
|
|
::= { dDhcpRPoolClassRelayTargetEntry 1 }
|
|
|
|
dDhcpRPoClRelayTargetClassName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a DHCP class.
|
|
The value must be same as an entry in dDhcpSClassTable identified by
|
|
dDhcpSClassName."
|
|
REFERENCE
|
|
"dDhcpSClassName is defined in DLINKSW-DHCP-SERVER-MIB."
|
|
::= { dDhcpRPoolClassRelayTargetEntry 2 }
|
|
|
|
dDhcpRPoClRelayTargetVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of virtual routing and forwarding (VRF).
|
|
If this object is a zero length string, the relay target is in
|
|
global routing and forwarding space."
|
|
::= { dDhcpRPoolClassRelayTargetEntry 3 }
|
|
|
|
dDhcpRPoClRelayTargetAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address of the target server for
|
|
the class."
|
|
::= { dDhcpRPoolClassRelayTargetEntry 4 }
|
|
|
|
dDhcpRPoClRelayTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object manages this entry."
|
|
::= { dDhcpRPoolClassRelayTargetEntry 99 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRPoolRelayDestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRPoolRelayDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains DHCP relay destination IP address of DHCP
|
|
pools."
|
|
::= { dDhcpRPoolObjects 2 }
|
|
|
|
dDhcpRPoolRelayDestEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRPoolRelayDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By using DHCP class, DHCP relay uses option configuration to further
|
|
determine which IP addresses to allocate to clients."
|
|
INDEX {
|
|
dDhcpRPoolRelayDestPoolName,
|
|
dDhcpRPoolRelayDestVrfName,
|
|
dDhcpRPoolRelayDestAddr }
|
|
::= { dDhcpRPoolRelayDestTable 1 }
|
|
|
|
DDhcpRPoolRelayDestEntry ::= SEQUENCE {
|
|
dDhcpRPoolRelayDestPoolName DisplayString,
|
|
dDhcpRPoolRelayDestVrfName DisplayString,
|
|
dDhcpRPoolRelayDestAddr IpAddress,
|
|
dDhcpRPoolRelayDestRowStatus RowStatus
|
|
}
|
|
|
|
dDhcpRPoolRelayDestPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a DHCP pool.
|
|
The value must be same as an entry in dDhcpSPoolTable identified by
|
|
dDhcpSPoolName."
|
|
REFERENCE
|
|
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
|
|
::= { dDhcpRPoolRelayDestEntry 1 }
|
|
|
|
dDhcpRPoolRelayDestVrfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of virtual routing and forwarding(VRF).
|
|
If this object is a zero length string, the destination DHCP server
|
|
IP address is in global routing and forwarding space."
|
|
::= { dDhcpRPoolRelayDestEntry 2 }
|
|
|
|
dDhcpRPoolRelayDestAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address of the relay destination for
|
|
the pool."
|
|
::= { dDhcpRPoolRelayDestEntry 3 }
|
|
|
|
dDhcpRPoolRelayDestRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object manages this entry."
|
|
::= { dDhcpRPoolRelayDestEntry 99 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRPoolRelaySourceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRPoolRelaySourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the configuration of the source subnet that
|
|
the client packets come from."
|
|
::= { dDhcpRPoolObjects 3 }
|
|
|
|
dDhcpRPoolRelaySourceEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRPoolRelaySourceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry identifying a surce subnet that the client packets come
|
|
from."
|
|
INDEX {
|
|
dDhcpRPoolRelaySourcePoolName,
|
|
dDhcpRPoolRelaySourceSubnet,
|
|
dDhcpRPoolRelaySourceSubnetMask
|
|
}
|
|
::= { dDhcpRPoolRelaySourceTable 1 }
|
|
|
|
DDhcpRPoolRelaySourceEntry ::= SEQUENCE {
|
|
dDhcpRPoolRelaySourcePoolName DisplayString,
|
|
dDhcpRPoolRelaySourceSubnet IpAddress,
|
|
dDhcpRPoolRelaySourceSubnetMask IpAddress,
|
|
dDhcpRPoolRelaySourceRowStatus RowStatus
|
|
}
|
|
|
|
dDhcpRPoolRelaySourcePoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a DHCP pool.
|
|
The value must be same as an entry in dDhcpSPoolTable identified by
|
|
dDhcpSPoolName."
|
|
REFERENCE
|
|
"dDhcpSPoolName is defined in DLINKSW-DHCP-SERVER-MIB."
|
|
::= { dDhcpRPoolRelaySourceEntry 1 }
|
|
|
|
dDhcpRPoolRelaySourceSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source subnet of the client packets
|
|
come from of the corresponding entry."
|
|
::= { dDhcpRPoolRelaySourceEntry 2 }
|
|
|
|
dDhcpRPoolRelaySourceSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the network mask of the source subnet
|
|
for the corresponding entry."
|
|
::= { dDhcpRPoolRelaySourceEntry 3 }
|
|
|
|
dDhcpRPoolRelaySourceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object manages this entry."
|
|
::= { dDhcpRPoolRelaySourceEntry 99}
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRelayIfObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 3 }
|
|
|
|
dDhcpRIfIgnoreBootpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRIfIgnoreBootpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of configurations about the BOOTP/DHCP relay will ignore
|
|
BOOTP packet on an interface.
|
|
An entry is created/removed when ignoring the BOOTP request
|
|
packets is enabled or disabled on an interface via CLI or by
|
|
issuing appropriate sets to this table using snmp. "
|
|
::= { dDhcpRelayIfObjects 1 }
|
|
|
|
dDhcpRIfIgnoreBootpEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRIfIgnoreBootpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the dDhcpRelayAddrTable."
|
|
INDEX { dDhcpRIfIgnoreBootpIfIndex }
|
|
::= { dDhcpRIfIgnoreBootpTable 1 }
|
|
|
|
DDhcpRIfIgnoreBootpEntry ::= SEQUENCE {
|
|
dDhcpRIfIgnoreBootpIfIndex InterfaceIndex,
|
|
dDhcpRIfIgnoreBootpEnabled TruthValue
|
|
}
|
|
|
|
dDhcpRIfIgnoreBootpIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface.
|
|
Only VLAN interfaces are valid interfaces for this object."
|
|
::= { dDhcpRIfIgnoreBootpEntry 1 }
|
|
|
|
dDhcpRIfIgnoreBootpEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the interface ignore the bootp packet or not."
|
|
::= { dDhcpRIfIgnoreBootpEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRIfAgentInfoChkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoChkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of configurations about the DHCP relay validates the
|
|
relay agent information (option 82) in the received DHCP reply packet
|
|
on an interface.
|
|
An entry is created/removed when checking option 82 is or not configured
|
|
on an interface via CLI or by issuing appropriate sets to this table
|
|
using snmp.
|
|
If checking option 82 is not configured for an interface, the global
|
|
setting, dDhcpRelayAgentInfoCheckEnabled takes effect. If checking
|
|
option 82 is configured for an interface, the interface setting takes
|
|
effect."
|
|
::= { dDhcpRelayIfObjects 2 }
|
|
|
|
dDhcpRIfAgentInfoChkEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRIfAgentInfoChkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the dDhcpRIfInfoChkTable."
|
|
INDEX { dDhcpRIfAgentInfoChkIfIndex }
|
|
::= { dDhcpRIfAgentInfoChkTable 1 }
|
|
|
|
DDhcpRIfAgentInfoChkEntry ::= SEQUENCE {
|
|
dDhcpRIfAgentInfoChkIfIndex InterfaceIndex,
|
|
dDhcpRIfAgentInfoChkState INTEGER
|
|
}
|
|
|
|
dDhcpRIfAgentInfoChkIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface.
|
|
Only VLAN interfaces are valid interfaces for this object."
|
|
::= { dDhcpRIfAgentInfoChkEntry 1 }
|
|
|
|
dDhcpRIfAgentInfoChkState OBJECT-TYPE
|
|
SYNTAX INTEGER{enabled(1), disabled(2), none(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the DHCP relay agent validates the
|
|
relay agent information option in the received DHCP reply packet
|
|
on the corresponding interface."
|
|
::= { dDhcpRIfAgentInfoChkEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRIfAgentInfoInsertTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoInsertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of configurations about whether insert option 82 for
|
|
an interface during relay of DHCP request packets.
|
|
An entry is created/removed when the insertion of
|
|
option 82 is or not configured on an interface via CLI
|
|
or by issuing appropriate sets to this table using snmp.
|
|
If the insertion of option 82 is not configured for an interface,
|
|
the global setting, dDhcpRelayAgentInfoInsertEnabled takes effect. If checking
|
|
option 82 is configured for an interface, the interface setting takes
|
|
effect."
|
|
::= { dDhcpRelayIfObjects 3 }
|
|
|
|
dDhcpRIfAgentInfoInsertEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRIfAgentInfoInsertEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the dDhcpRIfAgentInfoInsertTable."
|
|
INDEX { dDhcpRIfAgentInfoInsertIfIndex }
|
|
::= { dDhcpRIfAgentInfoInsertTable 1 }
|
|
|
|
DDhcpRIfAgentInfoInsertEntry ::= SEQUENCE {
|
|
dDhcpRIfAgentInfoInsertIfIndex InterfaceIndex,
|
|
dDhcpRIfAgentInfoInsertState INTEGER
|
|
}
|
|
|
|
dDhcpRIfAgentInfoInsertIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface.
|
|
Only VLAN interfaces are valid interfaces for this object."
|
|
::= { dDhcpRIfAgentInfoInsertEntry 1 }
|
|
|
|
dDhcpRIfAgentInfoInsertState OBJECT-TYPE
|
|
SYNTAX INTEGER{enabled(1), disabled(2), none(3)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether insert option 82 for an interface
|
|
during relay of DHCP request packets."
|
|
::= { dDhcpRIfAgentInfoInsertEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRIfAgentInfoPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of configurations about relay agent information
|
|
re-forwarding policy for the DHCP relay agent on an interface.
|
|
An entry is created/removed when the re-forwarding policy
|
|
is or not configured on an interface via CLI
|
|
or by issuing appropriate sets to this table using snmp.
|
|
If the re-forwarding policy is not configured for an interface,
|
|
the global setting, dDhcpRelayAgentInfoPolicy takes effect. If
|
|
re-forwarding policy is configured for an interface, the interface
|
|
setting takes effect."
|
|
::= { dDhcpRelayIfObjects 4 }
|
|
|
|
dDhcpRIfAgentInfoPolicyEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRIfAgentInfoPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the dDhcpRIfAgentInfoPolicyTable."
|
|
INDEX { dDhcpRIfAgentInfoPolicyIfIndex }
|
|
::= { dDhcpRIfAgentInfoPolicyTable 1 }
|
|
|
|
DDhcpRIfAgentInfoPolicyEntry ::= SEQUENCE {
|
|
dDhcpRIfAgentInfoPolicyIfIndex InterfaceIndex,
|
|
dDhcpRIfAgentInfoPolicyAction INTEGER
|
|
}
|
|
|
|
dDhcpRIfAgentInfoPolicyIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface.
|
|
Only VLAN interfaces are valid interfaces for this object."
|
|
::= { dDhcpRIfAgentInfoPolicyEntry 1 }
|
|
|
|
dDhcpRIfAgentInfoPolicyAction OBJECT-TYPE
|
|
SYNTAX INTEGER { drop(1), keep(2), replace(3), none(4)}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the re-forwarding policy of DHCP relay agent
|
|
information option 82 for the corresponding interface.
|
|
drop (1) - discards the packet that already has the relay
|
|
option.
|
|
keep (2) - the DHCP requests packet that already has the relay
|
|
option is left unchanged and directly relayed to the
|
|
DHCP server.
|
|
replace (3) - the DHCP requests packet that already has the relay
|
|
option will be replaced by a new option.
|
|
none (4) - not configure the policy action on the interface. "
|
|
::= { dDhcpRIfAgentInfoPolicyEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRIfAgentInfoTrustTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRIfAgentInfoTrustEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of configurations about the relay agent trusts the relay
|
|
information on an interface.
|
|
An entry is created/removed when the trusting relay information
|
|
is enabled/disabled on an interface via CLI or by issuing
|
|
appropriate sets to this table using snmp.
|
|
|
|
If dDhcpRelayInfoTrustAll is 'true', the dhcp relay information is
|
|
trusted for all interfaces. If dDhcpRelayInfoTrustAll is 'false',
|
|
the trust state on an interface is determined whether
|
|
the corresponding interface exists in this table. If exists, the
|
|
corresponding interface is trusted, otherwise, the interface is not
|
|
trusted.
|
|
|
|
When relay information is trusted on an interface, the
|
|
arriving packets with giaddr==0 (this relay agent is the first
|
|
relay of this DHCP request packet) but with relay agent information
|
|
option present will be accepted. If it is un-trusted, these packets
|
|
will be dropped."
|
|
::= { dDhcpRelayIfObjects 5 }
|
|
|
|
dDhcpRIfAgentInfoTrustEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRIfAgentInfoTrustEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the dDhcpRIfAgentInfoTrustTable."
|
|
INDEX { dDhcpRIfAgentInfoTrustIfIndex }
|
|
::= { dDhcpRIfAgentInfoTrustTable 1 }
|
|
|
|
DDhcpRIfAgentInfoTrustEntry ::= SEQUENCE {
|
|
dDhcpRIfAgentInfoTrustIfIndex InterfaceIndex,
|
|
dDhcpRIfAgentInfoTrustEnabled TruthValue
|
|
}
|
|
|
|
dDhcpRIfAgentInfoTrustIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface.
|
|
Only VLAN interfaces are valid interfaces for this object."
|
|
::= { dDhcpRIfAgentInfoTrustEntry 1 }
|
|
|
|
dDhcpRIfAgentInfoTrustEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the interface is trusted on
|
|
the not."
|
|
::= { dDhcpRIfAgentInfoTrustEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRelayPortIfOption82Objects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 4 }
|
|
|
|
dDhcpRPortIfOp82RemIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRPortIfOp82RemIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the remote ID sub-option of Option 82
|
|
for physical port or port channel interface."
|
|
::={ dDhcpRelayPortIfOption82Objects 1}
|
|
|
|
dDhcpRPortIfOp82RemIdEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRPortIfOp82RemIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in dDhcpRPortIfOption82RemIdTable containing the
|
|
configuration about the remote ID sub-option of Option 82 for the
|
|
corresponding interface."
|
|
INDEX { dDhcpRPortIfOp82RemIdIfIndex }
|
|
::={ dDhcpRPortIfOp82RemIdTable 1 }
|
|
|
|
DDhcpRPortIfOp82RemIdEntry ::= SEQUENCE{
|
|
dDhcpRPortIfOp82RemIdIfIndex InterfaceIndex,
|
|
dDhcpRPortIfOp82RemIdVendor3Cfg DisplayString
|
|
}
|
|
|
|
dDhcpRPortIfOp82RemIdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex value of the port or port channel.
|
|
Only physical port and port channel interface will appear in this
|
|
table."
|
|
::= { dDhcpRPortIfOp82RemIdEntry 1 }
|
|
|
|
dDhcpRPortIfOp82RemIdVendor3Cfg OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the per port/port channel user defined
|
|
string as remote ID.
|
|
This object is used when dDhcpROption82RemoteIdType is set to
|
|
'vendor3'."
|
|
::= { dDhcpRPortIfOp82RemIdEntry 2 }
|
|
|
|
dDhcpRPortIfOp82CirIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DDhcpRPortIfOp82CirIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to manage the circuit ID sub-option of Option 82
|
|
for physical port or port channel interface."
|
|
::={ dDhcpRelayPortIfOption82Objects 2}
|
|
|
|
dDhcpRPortIfOp82CirIdEntry OBJECT-TYPE
|
|
SYNTAX DDhcpRPortIfOp82CirIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in dDhcpRPortIfOp82CirIdTable containing the
|
|
configuration about the circuit ID sub-option of Option 82 for the
|
|
corresponding interface."
|
|
INDEX { dDhcpRPortIfOp82CirIdIfIndex}
|
|
::={ dDhcpRPortIfOp82CirIdTable 1 }
|
|
|
|
DDhcpRPortIfOp82CirIdEntry ::= SEQUENCE{
|
|
dDhcpRPortIfOp82CirIdIfIndex InterfaceIndex,
|
|
dDhcpRPortIfOp82CirIdVendor3Cfg DisplayString
|
|
}
|
|
|
|
dDhcpRPortIfOp82CirIdIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex value of the port or port channel.
|
|
Only physical port and port channel interface will appear in this
|
|
table."
|
|
::= { dDhcpRPortIfOp82CirIdEntry 1 }
|
|
|
|
dDhcpRPortIfOp82CirIdVendor3Cfg OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the per port/port channel user defined
|
|
string as circuit ID.
|
|
This object is used when dDhcpROption82CircuitIdType is set to
|
|
'vendor3'."
|
|
::= { dDhcpRPortIfOp82CirIdEntry 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dDhcpRelayVlanObjects OBJECT IDENTIFIER ::= { dDhcpRelayMIBObjects 5 }
|
|
|
|
dDhcpRVlanLocalRelayCrlFirst2K OBJECT-TYPE
|
|
SYNTAX Dlink2kVlanList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DHCP Local Relay enabled VLAN in a
|
|
string of octets containing one bit per VLAN for VLANs 1 to 2048.
|
|
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay.
|
|
"
|
|
::= { dDhcpRelayVlanObjects 1 }
|
|
|
|
dDhcpRVlanLocalRelayCrlSecond2K OBJECT-TYPE
|
|
SYNTAX Dlink2kVlanList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DHCP Local Relay enabled VLAN in a
|
|
string of octets containing one bit per VLAN for VLANs 2049 to 4094.
|
|
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay.
|
|
"
|
|
::= { dDhcpRelayVlanObjects 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- ***************************************************************************
|
|
-- Conformance
|
|
-- ***************************************************************************
|
|
dDhcpRelayCompliances OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 1 }
|
|
|
|
dDhcpRelayCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
DLINK-DHCP-RELAY-IPV4-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
dDhcpRGblCfgGroup,
|
|
dDhcpRPoolCfgGroup,
|
|
dDhcpRInterfaceGroup
|
|
}
|
|
|
|
GROUP dDhcpROp82SuboptionGroup
|
|
DESCRIPTION
|
|
"This group is required only for implementations that support
|
|
sub-options configuration of option 82."
|
|
|
|
GROUP dDhcpRVlanCfgGroup
|
|
DESCRIPTION
|
|
"This group is required only for implementations that support
|
|
DHCP Local Relay for per VLAN."
|
|
::= { dDhcpRelayCompliances 1 }
|
|
|
|
dDhcpRelayGroups OBJECT IDENTIFIER ::= { dDhcpRelayMIBConformance 2 }
|
|
|
|
dDhcpRGblCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dDhcpRelayAgentInfoCheckEnabled,
|
|
dDhcpRelayAgentInfoInsertEnabled,
|
|
dDhcpRelayAgentInfoPolicy,
|
|
dDhcpRelayInfoTrustAll,
|
|
dDhcpRelaySmartRelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing global configuration about DHCP
|
|
relay."
|
|
::= { dDhcpRelayGroups 1 }
|
|
|
|
|
|
dDhcpRPoolCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dDhcpRPoClRelayTargetRowStatus,
|
|
dDhcpRPoolRelayDestRowStatus,
|
|
dDhcpRPoolRelaySourceRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing DHCP pool configuration."
|
|
::= { dDhcpRelayGroups 2 }
|
|
|
|
dDhcpRInterfaceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dDhcpRIfIgnoreBootpEnabled,
|
|
dDhcpRIfAgentInfoChkState,
|
|
dDhcpRIfAgentInfoInsertState,
|
|
dDhcpRIfAgentInfoPolicyAction,
|
|
dDhcpRIfAgentInfoTrustEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing per interface configuration of
|
|
DHCP Relay."
|
|
::= { dDhcpRelayGroups 3 }
|
|
|
|
dDhcpROp82SuboptionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dDhcpROption82RemoteIdType,
|
|
dDhcpROption82RemoteIdUserDef,
|
|
dDhcpROption82CircuitIdType,
|
|
dDhcpROption82CircuitIdUserDef,
|
|
dDhcpRPortIfOp82RemIdVendor3Cfg,
|
|
dDhcpRPortIfOp82CirIdVendor3Cfg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing sub-options configuration of option 82."
|
|
::= { dDhcpRelayGroups 4 }
|
|
|
|
dDhcpRVlanCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dDhcpRVlanLocalRelayCrlFirst2K,
|
|
dDhcpRVlanLocalRelayCrlSecond2K
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects which are used to configure as
|
|
well as show information regarding the feature enabling
|
|
on each VLAN."
|
|
::= { dDhcpRelayGroups 5 }
|
|
|
|
END
|
|
|
|
|