mibs/MIBS/dlink/DLINKSW-L2FDB-MIB

579 lines
21 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-L2FDB-MIB.mib : L2 FDB MIB
--
-- Copyright (c) 2012 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-L2FDB-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,Unsigned32,
Integer32
FROM SNMPv2-SMI
RowStatus,DisplayString,TruthValue,MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
ifIndex, InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
dot1qFdbId, dot1qStaticUnicastAddress,
VlanId, PortList
FROM Q-BRIDGE-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwL2FdbMIB MODULE-IDENTITY
LAST-UPDATED "201212260000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for L2FDB."
REVISION "201212260000Z"
DESCRIPTION
"This is the first version of the MIB file for 'L2FDB'
functionality."
::= { dlinkIndustrialCommon 3 }
--
-- MIB OBJECTS
--
dL2FdbMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 0 }
dL2FdbMIBObjects OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 1 }
dL2FdbMIBConformance OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 2 }
-- -----------------------------------------------------------------------------
dL2FdbGblCtrl OBJECT IDENTIFIER ::= { dL2FdbMIBObjects 1 }
dL2FdbClearCtrl OBJECT IDENTIFIER ::= { dL2FdbGblCtrl 1 }
dL2FdbClearMacAddrByMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a MAC address which will be cleared.
When read, a value of '000000000000'H is returned."
::= { dL2FdbClearCtrl 1 }
dL2FdbClearMacAddrByIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the physical
port/port-channel/vlan interface on which
the dynamic MAC address(es) will be cleared.
When read, a value of 0 is returned."
::= { dL2FdbClearCtrl 2 }
dL2FdbClearAllMacAddr OBJECT-TYPE
SYNTAX INTEGER{
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object clears all of the dynamic FDB entries, when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dL2FdbClearCtrl 3 }
dL2FdbAgingTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 5..1000000 )
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the aging time in seconds.
The valid range is 5 to 1000000 seconds.
The special valie of 0 indicates the ging out function is disabled.
"
DEFVAL { 300 }
::= { dL2FdbGblCtrl 2 }
dL2FdbMacChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of MAC address notification feature
on the Switch."
DEFVAL { false }
::= { dL2FdbGblCtrl 3 }
dL2FdbMacChangeNotifInterval OBJECT-TYPE
SYNTAX Unsigned32 ( 1..2147483647 )
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval between two consecutive MAC address change notifications."
DEFVAL { 1 }
::= { dL2FdbGblCtrl 4 }
dL2FdbMacChangeNotifyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether cmnMacChangedNotification notifications
will or will not be sent when there are MAC addresses
learnt or removed from the forwarding table.
"
DEFVAL { false }
::= { dL2FdbGblCtrl 5 }
dL2FdbMacChangeHistorySize OBJECT-TYPE
SYNTAX Unsigned32 ( 0..500 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of the entries in the MAC history
notification table."
DEFVAL { 1 }
::= { dL2FdbGblCtrl 6 }
dL2FdbDestHitEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the state whether the destination MAC
address will trigger update function."
DEFVAL {false }
::= { dL2FdbGblCtrl 7 }
-- -----------------------------------------------------------------------------
dL2FdbStaticUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF DL2FdbStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of configuration for
static unicast MAC addresses."
::= { dL2FdbMIBObjects 2 }
dL2FdbStaticUnicastEntry OBJECT-TYPE
SYNTAX DL2FdbStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry represents configuration for a static
unicast MAC address information."
INDEX {
dL2FdbStaticUnicastVlanID,
dL2FdbStaticUnicastMacAddr
}
::= { dL2FdbStaticUnicastTable 1 }
DL2FdbStaticUnicastEntry ::= SEQUENCE {
dL2FdbStaticUnicastVlanID VlanId,
dL2FdbStaticUnicastMacAddr MacAddress,
dL2FdbStaticUnicastType INTEGER,
dL2FdbStaticUnicastPortNum Integer32,
dL2FdbStaticUnicastRowStatus RowStatus
}
dL2FdbStaticUnicastVlanID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the entry."
::= { dL2FdbStaticUnicastEntry 1 }
dL2FdbStaticUnicastMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the entry."
::= { dL2FdbStaticUnicastEntry 2 }
dL2FdbStaticUnicastType OBJECT-TYPE
SYNTAX INTEGER {
self(1),
permanent(2),
permanentDrop(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
self(1) - This entry is currently in use by the device's
MAC address.
permanent(2) - This entry is currently in use and will remain so
until after the next reset of the device.
permanentDrop(3) - This entry will filter the packet with the specified
MAC address as the source MAC or as the destination MAC.
The entry is currently in use and will remain so after the
next reboot of the device.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dL2FdbStaticUnicastEntry 3 }
dL2FdbStaticUnicastPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of the static unicast address.
The value of 0 indicates the CPU port.
The value of -1 indicates mac filter entry with permanentDrop type."
::= { dL2FdbStaticUnicastEntry 4 }
dL2FdbStaticUnicastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the RowStatus of this entry."
::= { dL2FdbStaticUnicastEntry 5 }
-- -----------------------------------------------------------------------------
dL2FdbIfCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF DL2FdbIfCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of interface-specific configuration for
L2 FDB."
::= { dL2FdbMIBObjects 3 }
dL2FdbIfCtrlEntry OBJECT-TYPE
SYNTAX DL2FdbIfCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents interface L2 FDB configuration."
INDEX { ifIndex }
::= { dL2FdbIfCtrlTable 1 }
DL2FdbIfCtrlEntry ::= SEQUENCE {
dL2FdbIfCtrlNotifyEnable BITS,
dL2FdbIfMacLearningEnabled TruthValue
}
dL2FdbIfCtrlNotifyEnable OBJECT-TYPE
SYNTAX BITS {
added(0),
removed(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
added(0) - the MAC change notification when a MAC address is added
on the interface.
removed(1) - the MAC change notification when a MAC address is removed
from the interface.
"
::= { dL2FdbIfCtrlEntry 1 }
dL2FdbIfMacLearningEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the MAC-address learning is enabled or not
on the physical interface."
::= { dL2FdbIfCtrlEntry 2 }
-- -----------------------------------------------------------------------------
dL2FdbMulticastFilterModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DL2FdbMulticastFilterModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of multicast filter mode configuration
of interfaces.
Only applicable interfaces will present on this table.
"
::= { dL2FdbMIBObjects 4 }
dL2FdbMulticastFilterModeEntry OBJECT-TYPE
SYNTAX DL2FdbMulticastFilterModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents multicast filter mode on an interface."
INDEX { dL2FdbMcastFilterModeIfIndex }
::= { dL2FdbMulticastFilterModeTable 1 }
DL2FdbMulticastFilterModeEntry ::= SEQUENCE {
dL2FdbMcastFilterModeIfIndex InterfaceIndex,
dL2FdbMcastFilterMode INTEGER
}
dL2FdbMcastFilterModeIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface.
If support vlan-based filtering mode: The valid interfaces are VLANs.
If support port-based filtering mode: The valid interfaces are physical
port.
"
::= { dL2FdbMulticastFilterModeEntry 1 }
dL2FdbMcastFilterMode OBJECT-TYPE
SYNTAX INTEGER {
forwardAll(1),
forwardUnregistered(2),
filterUnregistered(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the handling method for multicast packets
on the corresponding interface."
::= { dL2FdbMulticastFilterModeEntry 2 }
-- -----------------------------------------------------------------------------
dL2FdbMacChangeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF DL2FdbMacChangeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of MAC address change history."
::= { dL2FdbMIBObjects 5 }
dL2FdbMacChangeHistoryEntry OBJECT-TYPE
SYNTAX DL2FdbMacChangeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents a MAC address change."
INDEX { dL2FdbMacChangeHistoryIndex }
::= { dL2FdbMacChangeHistoryTable 1 }
DL2FdbMacChangeHistoryEntry ::= SEQUENCE {
dL2FdbMacChangeHistoryIndex Unsigned32,
dL2FdbMacChangeHistoryOp INTEGER,
dL2FdbMacChangeHistoryVlanID VlanId,
dL2FdbMacChangeHistoryMacAddr MacAddress,
dL2FdbMacChangeHistoryPortNum Integer32
}
dL2FdbMacChangeHistoryIndex OBJECT-TYPE
SYNTAX Unsigned32 ( 1..500 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is history index."
::= { dL2FdbMacChangeHistoryEntry 1 }
dL2FdbMacChangeHistoryOp OBJECT-TYPE
SYNTAX INTEGER {
added(1),
removed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"mac notify change operation
1 - learned a new MAC address
2 - deleted an old MAC address
"
::= { dL2FdbMacChangeHistoryEntry 2 }
dL2FdbMacChangeHistoryVlanID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the entry."
::= { dL2FdbMacChangeHistoryEntry 3 }
dL2FdbMacChangeHistoryMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the entry."
::= { dL2FdbMacChangeHistoryEntry 4 }
dL2FdbMacChangeHistoryPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the unicast address."
::= { dL2FdbMacChangeHistoryEntry 5 }
-- -----------------------------------------------------------------------------
dL2FdbNotifyInfo OBJECT IDENTIFIER ::= { dL2FdbMIBObjects 6 }
dL2FdbMacChangeNotifyInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE (1..1024))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the information for the device MAC address
changes. And the detailed information include:
Operation Code + MAC address + Box ID (or slot ID) + Port Number + Zero...
Operation Code: 1, 2
1 means learned a new MAC address
2 means deleted an old MAC address.
Box ID: The switch box ID, for standalone device, it always 1.
Port Number: The hysical port/port-channellearned or deleted for
the box,if port-channel, the box id is invalid
Zero: Used to separate each message(Operate Code + MAC address +
Box ID + Port Number)."
::= { dL2FdbNotifyInfo 1 }
-- ***************************************************************************
-- Notifications
-- ***************************************************************************
dL2FdbMacNotification NOTIFICATION-TYPE
OBJECTS { dL2FdbMacChangeNotifyInfo }
STATUS current
DESCRIPTION
"This trap indicates a MAC address is added to or removed from the
address table. "
::= { dL2FdbMIBNotifications 1 }
-- ***************************************************************************
-- Conformance
-- ***************************************************************************
dL2FdbCompliances OBJECT IDENTIFIER ::= { dL2FdbMIBConformance 1 }
dL2FdbCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-L2FDB-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dL2FdbGlobalGroup,
dL2FdbMacAddrTableGroup,
dL2FdbInterfaceGroup,
dL2FdbMcastFilterModeCfgGroup
}
GROUP dL2FdbMacChangeNotifyCfgGroup
DESCRIPTION
"This group is required only if the MAC change notification is
implemented by the agent."
GROUP dL2FdbMacChangeNotifyGroup
DESCRIPTION
"This group is required only if the MAC change notification is
implemented by the agent."
GROUP dL2FdbMacChgNotificationGroup
DESCRIPTION
"This group is required only if the MAC change notification is
implemented by the agent."
::= { dL2FdbCompliances 1 }
dL2FdbGroups OBJECT IDENTIFIER ::= { dL2FdbMIBConformance 2 }
dL2FdbGlobalGroup OBJECT-GROUP
OBJECTS {
dL2FdbClearMacAddrByMacAddr,
dL2FdbClearMacAddrByIf,
dL2FdbClearAllMacAddr,
dL2FdbAgingTime,
dL2FdbDestHitEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing the gloal configuration for L2FDB"
::= { dL2FdbGroups 1 }
dL2FdbMacAddrTableGroup OBJECT-GROUP
OBJECTS {
dL2FdbStaticUnicastType,
dL2FdbStaticUnicastPortNum,
dL2FdbStaticUnicastRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the information of MAC-Address-Table for L2FDB"
::= { dL2FdbGroups 2 }
dL2FdbInterfaceGroup OBJECT-GROUP
OBJECTS {
dL2FdbIfMacLearningEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing the information of Interface Table for L2FDB"
::= { dL2FdbGroups 3 }
dL2FdbMacChangeNotifyCfgGroup OBJECT-GROUP
OBJECTS {
dL2FdbMacChangeEnabled,
dL2FdbMacChangeNotifInterval,
dL2FdbMacChangeNotifyEnabled,
dL2FdbMacChangeHistorySize,
dL2FdbMacChangeNotifyInfo,
dL2FdbIfCtrlNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of objects about the information for L2FDB notification.
"
::= { dL2FdbGroups 4 }
dL2FdbMcastFilterModeCfgGroup OBJECT-GROUP
OBJECTS {
dL2FdbMcastFilterMode
}
STATUS current
DESCRIPTION
"A collection of objects about the configuration for multicast
filter mode.
"
::= { dL2FdbGroups 5 }
dL2FdbMacChangeNotifyGroup OBJECT-GROUP
OBJECTS {
dL2FdbMacChangeHistoryOp,
dL2FdbMacChangeHistoryVlanID,
dL2FdbMacChangeHistoryMacAddr,
dL2FdbMacChangeHistoryPortNum
}
STATUS current
DESCRIPTION
"The notifications information used for the change of
MAC address table.
"
::= { dL2FdbGroups 6 }
dL2FdbMacChgNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
dL2FdbMacNotification
}
STATUS current
DESCRIPTION
"The collection of notifications used for monitoring the change of
MAC address table."
::= { dL2FdbGroups 7 }
END