579 lines
21 KiB
Plaintext
579 lines
21 KiB
Plaintext
-- *****************************************************************
|
|
-- DLINKSW-L2FDB-MIB.mib : L2 FDB MIB
|
|
--
|
|
-- Copyright (c) 2012 D-Link Corporation, all rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
DLINKSW-L2FDB-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,Unsigned32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
RowStatus,DisplayString,TruthValue,MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex, InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
dot1qFdbId, dot1qStaticUnicastAddress,
|
|
VlanId, PortList
|
|
FROM Q-BRIDGE-MIB
|
|
dlinkIndustrialCommon
|
|
FROM DLINK-ID-REC-MIB;
|
|
|
|
dlinkSwL2FdbMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201212260000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
" D-Link Corporation
|
|
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
|
Taipei City 114, Taiwan, R.O.C
|
|
Tel: +886-2-66000123
|
|
E-mail: tsd@dlink.com.tw
|
|
"
|
|
DESCRIPTION
|
|
"This MIB module defines objects for L2FDB."
|
|
|
|
REVISION "201212260000Z"
|
|
DESCRIPTION
|
|
"This is the first version of the MIB file for 'L2FDB'
|
|
functionality."
|
|
::= { dlinkIndustrialCommon 3 }
|
|
|
|
--
|
|
-- MIB OBJECTS
|
|
--
|
|
dL2FdbMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 0 }
|
|
dL2FdbMIBObjects OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 1 }
|
|
dL2FdbMIBConformance OBJECT IDENTIFIER ::= { dlinkSwL2FdbMIB 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbGblCtrl OBJECT IDENTIFIER ::= { dL2FdbMIBObjects 1 }
|
|
|
|
dL2FdbClearCtrl OBJECT IDENTIFIER ::= { dL2FdbGblCtrl 1 }
|
|
dL2FdbClearMacAddrByMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies a MAC address which will be cleared.
|
|
When read, a value of '000000000000'H is returned."
|
|
::= { dL2FdbClearCtrl 1 }
|
|
|
|
dL2FdbClearMacAddrByIf OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex of the physical
|
|
port/port-channel/vlan interface on which
|
|
the dynamic MAC address(es) will be cleared.
|
|
When read, a value of 0 is returned."
|
|
::= { dL2FdbClearCtrl 2 }
|
|
|
|
dL2FdbClearAllMacAddr OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
clear(1),
|
|
noOp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object clears all of the dynamic FDB entries, when set to 'clear'.
|
|
No action is taken if this object is set to 'noOp'.
|
|
When read, the value 'noOp' is returned."
|
|
::= { dL2FdbClearCtrl 3 }
|
|
|
|
dL2FdbAgingTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0 | 5..1000000 )
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the aging time in seconds.
|
|
The valid range is 5 to 1000000 seconds.
|
|
The special valie of 0 indicates the ging out function is disabled.
|
|
"
|
|
DEFVAL { 300 }
|
|
::= { dL2FdbGblCtrl 2 }
|
|
|
|
dL2FdbMacChangeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of MAC address notification feature
|
|
on the Switch."
|
|
DEFVAL { false }
|
|
::= { dL2FdbGblCtrl 3 }
|
|
|
|
dL2FdbMacChangeNotifInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 1..2147483647 )
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interval between two consecutive MAC address change notifications."
|
|
DEFVAL { 1 }
|
|
::= { dL2FdbGblCtrl 4 }
|
|
|
|
dL2FdbMacChangeNotifyEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether cmnMacChangedNotification notifications
|
|
will or will not be sent when there are MAC addresses
|
|
learnt or removed from the forwarding table.
|
|
"
|
|
DEFVAL { false }
|
|
::= { dL2FdbGblCtrl 5 }
|
|
|
|
dL2FdbMacChangeHistorySize OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 0..500 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum number of the entries in the MAC history
|
|
notification table."
|
|
DEFVAL { 1 }
|
|
::= { dL2FdbGblCtrl 6 }
|
|
|
|
dL2FdbDestHitEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the state whether the destination MAC
|
|
address will trigger update function."
|
|
DEFVAL {false }
|
|
::= { dL2FdbGblCtrl 7 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbStaticUnicastTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DL2FdbStaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of configuration for
|
|
static unicast MAC addresses."
|
|
::= { dL2FdbMIBObjects 2 }
|
|
|
|
dL2FdbStaticUnicastEntry OBJECT-TYPE
|
|
SYNTAX DL2FdbStaticUnicastEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table entry represents configuration for a static
|
|
unicast MAC address information."
|
|
INDEX {
|
|
dL2FdbStaticUnicastVlanID,
|
|
dL2FdbStaticUnicastMacAddr
|
|
}
|
|
::= { dL2FdbStaticUnicastTable 1 }
|
|
|
|
DL2FdbStaticUnicastEntry ::= SEQUENCE {
|
|
dL2FdbStaticUnicastVlanID VlanId,
|
|
dL2FdbStaticUnicastMacAddr MacAddress,
|
|
dL2FdbStaticUnicastType INTEGER,
|
|
dL2FdbStaticUnicastPortNum Integer32,
|
|
dL2FdbStaticUnicastRowStatus RowStatus
|
|
}
|
|
|
|
dL2FdbStaticUnicastVlanID OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the entry."
|
|
::= { dL2FdbStaticUnicastEntry 1 }
|
|
|
|
dL2FdbStaticUnicastMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the entry."
|
|
::= { dL2FdbStaticUnicastEntry 2 }
|
|
|
|
dL2FdbStaticUnicastType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
self(1),
|
|
permanent(2),
|
|
permanentDrop(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
|
|
self(1) - This entry is currently in use by the device's
|
|
MAC address.
|
|
|
|
permanent(2) - This entry is currently in use and will remain so
|
|
until after the next reset of the device.
|
|
|
|
permanentDrop(3) - This entry will filter the packet with the specified
|
|
MAC address as the source MAC or as the destination MAC.
|
|
The entry is currently in use and will remain so after the
|
|
next reboot of the device.
|
|
|
|
The value of this object MUST be retained across
|
|
reinitializations of the management system."
|
|
::= { dL2FdbStaticUnicastEntry 3 }
|
|
|
|
dL2FdbStaticUnicastPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the static unicast address.
|
|
The value of 0 indicates the CPU port.
|
|
The value of -1 indicates mac filter entry with permanentDrop type."
|
|
::= { dL2FdbStaticUnicastEntry 4 }
|
|
|
|
dL2FdbStaticUnicastRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the RowStatus of this entry."
|
|
::= { dL2FdbStaticUnicastEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbIfCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DL2FdbIfCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of interface-specific configuration for
|
|
L2 FDB."
|
|
::= { dL2FdbMIBObjects 3 }
|
|
|
|
dL2FdbIfCtrlEntry OBJECT-TYPE
|
|
SYNTAX DL2FdbIfCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry represents interface L2 FDB configuration."
|
|
INDEX { ifIndex }
|
|
::= { dL2FdbIfCtrlTable 1 }
|
|
|
|
DL2FdbIfCtrlEntry ::= SEQUENCE {
|
|
dL2FdbIfCtrlNotifyEnable BITS,
|
|
dL2FdbIfMacLearningEnabled TruthValue
|
|
}
|
|
|
|
dL2FdbIfCtrlNotifyEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
added(0),
|
|
removed(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether a specified notification is enabled or not.
|
|
If a bit corresponding to a notification is set to 1, then
|
|
the specified notification can be generated.
|
|
|
|
added(0) - the MAC change notification when a MAC address is added
|
|
on the interface.
|
|
removed(1) - the MAC change notification when a MAC address is removed
|
|
from the interface.
|
|
"
|
|
::= { dL2FdbIfCtrlEntry 1 }
|
|
|
|
|
|
dL2FdbIfMacLearningEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the MAC-address learning is enabled or not
|
|
on the physical interface."
|
|
::= { dL2FdbIfCtrlEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbMulticastFilterModeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DL2FdbMulticastFilterModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of multicast filter mode configuration
|
|
of interfaces.
|
|
Only applicable interfaces will present on this table.
|
|
"
|
|
::= { dL2FdbMIBObjects 4 }
|
|
|
|
dL2FdbMulticastFilterModeEntry OBJECT-TYPE
|
|
SYNTAX DL2FdbMulticastFilterModeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry represents multicast filter mode on an interface."
|
|
INDEX { dL2FdbMcastFilterModeIfIndex }
|
|
::= { dL2FdbMulticastFilterModeTable 1 }
|
|
|
|
DL2FdbMulticastFilterModeEntry ::= SEQUENCE {
|
|
dL2FdbMcastFilterModeIfIndex InterfaceIndex,
|
|
dL2FdbMcastFilterMode INTEGER
|
|
}
|
|
|
|
dL2FdbMcastFilterModeIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ifIndex of the interface.
|
|
If support vlan-based filtering mode: The valid interfaces are VLANs.
|
|
If support port-based filtering mode: The valid interfaces are physical
|
|
port.
|
|
"
|
|
::= { dL2FdbMulticastFilterModeEntry 1 }
|
|
|
|
|
|
dL2FdbMcastFilterMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forwardAll(1),
|
|
forwardUnregistered(2),
|
|
filterUnregistered(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the handling method for multicast packets
|
|
on the corresponding interface."
|
|
::= { dL2FdbMulticastFilterModeEntry 2 }
|
|
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbMacChangeHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DL2FdbMacChangeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of MAC address change history."
|
|
::= { dL2FdbMIBObjects 5 }
|
|
|
|
dL2FdbMacChangeHistoryEntry OBJECT-TYPE
|
|
SYNTAX DL2FdbMacChangeHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry represents a MAC address change."
|
|
INDEX { dL2FdbMacChangeHistoryIndex }
|
|
::= { dL2FdbMacChangeHistoryTable 1 }
|
|
|
|
DL2FdbMacChangeHistoryEntry ::= SEQUENCE {
|
|
dL2FdbMacChangeHistoryIndex Unsigned32,
|
|
dL2FdbMacChangeHistoryOp INTEGER,
|
|
dL2FdbMacChangeHistoryVlanID VlanId,
|
|
dL2FdbMacChangeHistoryMacAddr MacAddress,
|
|
dL2FdbMacChangeHistoryPortNum Integer32
|
|
}
|
|
|
|
dL2FdbMacChangeHistoryIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 ( 1..500 )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is history index."
|
|
::= { dL2FdbMacChangeHistoryEntry 1 }
|
|
|
|
dL2FdbMacChangeHistoryOp OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
added(1),
|
|
removed(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"mac notify change operation
|
|
1 - learned a new MAC address
|
|
2 - deleted an old MAC address
|
|
"
|
|
::= { dL2FdbMacChangeHistoryEntry 2 }
|
|
|
|
dL2FdbMacChangeHistoryVlanID OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID of the entry."
|
|
::= { dL2FdbMacChangeHistoryEntry 3 }
|
|
|
|
dL2FdbMacChangeHistoryMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the entry."
|
|
::= { dL2FdbMacChangeHistoryEntry 4 }
|
|
|
|
dL2FdbMacChangeHistoryPortNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the unicast address."
|
|
::= { dL2FdbMacChangeHistoryEntry 5 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dL2FdbNotifyInfo OBJECT IDENTIFIER ::= { dL2FdbMIBObjects 6 }
|
|
|
|
dL2FdbMacChangeNotifyInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (1..1024))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the information for the device MAC address
|
|
changes. And the detailed information include:
|
|
Operation Code + MAC address + Box ID (or slot ID) + Port Number + Zero...
|
|
|
|
Operation Code: 1, 2
|
|
1 means learned a new MAC address
|
|
2 means deleted an old MAC address.
|
|
Box ID: The switch box ID, for standalone device, it always 1.
|
|
Port Number: The hysical port/port-channellearned or deleted for
|
|
the box,if port-channel, the box id is invalid
|
|
Zero: Used to separate each message(Operate Code + MAC address +
|
|
Box ID + Port Number)."
|
|
::= { dL2FdbNotifyInfo 1 }
|
|
|
|
|
|
|
|
-- ***************************************************************************
|
|
-- Notifications
|
|
-- ***************************************************************************
|
|
dL2FdbMacNotification NOTIFICATION-TYPE
|
|
OBJECTS { dL2FdbMacChangeNotifyInfo }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap indicates a MAC address is added to or removed from the
|
|
address table. "
|
|
::= { dL2FdbMIBNotifications 1 }
|
|
|
|
-- ***************************************************************************
|
|
-- Conformance
|
|
-- ***************************************************************************
|
|
dL2FdbCompliances OBJECT IDENTIFIER ::= { dL2FdbMIBConformance 1 }
|
|
|
|
dL2FdbCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
DLINKSW-L2FDB-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
dL2FdbGlobalGroup,
|
|
dL2FdbMacAddrTableGroup,
|
|
dL2FdbInterfaceGroup,
|
|
dL2FdbMcastFilterModeCfgGroup
|
|
}
|
|
GROUP dL2FdbMacChangeNotifyCfgGroup
|
|
DESCRIPTION
|
|
"This group is required only if the MAC change notification is
|
|
implemented by the agent."
|
|
|
|
GROUP dL2FdbMacChangeNotifyGroup
|
|
DESCRIPTION
|
|
"This group is required only if the MAC change notification is
|
|
implemented by the agent."
|
|
GROUP dL2FdbMacChgNotificationGroup
|
|
DESCRIPTION
|
|
"This group is required only if the MAC change notification is
|
|
implemented by the agent."
|
|
::= { dL2FdbCompliances 1 }
|
|
|
|
dL2FdbGroups OBJECT IDENTIFIER ::= { dL2FdbMIBConformance 2 }
|
|
|
|
dL2FdbGlobalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbClearMacAddrByMacAddr,
|
|
dL2FdbClearMacAddrByIf,
|
|
dL2FdbClearAllMacAddr,
|
|
dL2FdbAgingTime,
|
|
dL2FdbDestHitEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the gloal configuration for L2FDB"
|
|
::= { dL2FdbGroups 1 }
|
|
|
|
dL2FdbMacAddrTableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbStaticUnicastType,
|
|
dL2FdbStaticUnicastPortNum,
|
|
dL2FdbStaticUnicastRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the information of MAC-Address-Table for L2FDB"
|
|
::= { dL2FdbGroups 2 }
|
|
|
|
dL2FdbInterfaceGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbIfMacLearningEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the information of Interface Table for L2FDB"
|
|
::= { dL2FdbGroups 3 }
|
|
|
|
dL2FdbMacChangeNotifyCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbMacChangeEnabled,
|
|
dL2FdbMacChangeNotifInterval,
|
|
dL2FdbMacChangeNotifyEnabled,
|
|
dL2FdbMacChangeHistorySize,
|
|
dL2FdbMacChangeNotifyInfo,
|
|
dL2FdbIfCtrlNotifyEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects about the information for L2FDB notification.
|
|
"
|
|
::= { dL2FdbGroups 4 }
|
|
|
|
dL2FdbMcastFilterModeCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbMcastFilterMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects about the configuration for multicast
|
|
filter mode.
|
|
"
|
|
::= { dL2FdbGroups 5 }
|
|
|
|
dL2FdbMacChangeNotifyGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dL2FdbMacChangeHistoryOp,
|
|
dL2FdbMacChangeHistoryVlanID,
|
|
dL2FdbMacChangeHistoryMacAddr,
|
|
dL2FdbMacChangeHistoryPortNum
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notifications information used for the change of
|
|
MAC address table.
|
|
"
|
|
::= { dL2FdbGroups 6 }
|
|
|
|
dL2FdbMacChgNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
dL2FdbMacNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications used for monitoring the change of
|
|
MAC address table."
|
|
::= { dL2FdbGroups 7 }
|
|
|
|
END
|
|
|