1410 lines
50 KiB
Plaintext
1410 lines
50 KiB
Plaintext
|
CTRON-COMMON-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- ctron-common-mib.txt
|
||
|
|
-- Part Number: 2170549-01
|
||
|
|
-- Revision: 1.03.03
|
||
|
|
-- Date: December 9, 1997
|
||
|
|
|
||
|
|
-- Cabletron Systems, Inc.
|
||
|
|
-- 35 Industrial Way, P.O. Box 5005
|
||
|
|
-- Rochester, NH 03867-0505
|
||
|
|
-- (603) 332-9400
|
||
|
|
-- support@ctron.com
|
||
|
|
|
||
|
|
-- This module provides authoritative definitions for Cabletron's
|
||
|
|
-- enterprise-specific common MIB.
|
||
|
|
--
|
||
|
|
-- This module will be extended, as required.
|
||
|
|
--
|
||
|
|
|
||
|
|
-- Cabletron Systems reserves the right to make changes in
|
||
|
|
-- specification and other information contained in this document
|
||
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
||
|
|
-- to determine whether any such changes have been made.
|
||
|
|
--
|
||
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
||
|
|
-- indirect, special, or consequential damages whatsoever (including
|
||
|
|
-- but not limited to lost profits) arising out of or related to this
|
||
|
|
-- document or the information contained in it, even if Cabletron
|
||
|
|
-- Systems has been advised of, known, or should have known, the
|
||
|
|
-- possibility of such damages.
|
||
|
|
--
|
||
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
||
|
|
-- a non-exclusive license to use this Specification in connection
|
||
|
|
-- with the management of Cabletron products.
|
||
|
|
|
||
|
|
-- Copyright August 94 Cabletron Systems
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
NetworkAddress, Counter
|
||
|
|
FROM RFC1155-SMI
|
||
|
|
subSysMMAC, subSysDevice, ups,
|
||
|
|
commonRev1, dl
|
||
|
|
FROM IRM-OIDS
|
||
|
|
DisplayString, PhysAddress
|
||
|
|
FROM RFC1213-MIB
|
||
|
|
OBJECT-TYPE FROM RFC-1212;
|
||
|
|
|
||
|
|
|
||
|
|
-- Updated to Revision 1.01 on January 31, 1992. Added
|
||
|
|
-- download group.
|
||
|
|
|
||
|
|
|
||
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as defined
|
||
|
|
-- in [9];
|
||
|
|
|
||
|
|
-- Textual convention
|
||
|
|
|
||
|
|
-- DisplayString ::= OCTET STRING
|
||
|
|
-- This data type is used to model textual information taken from
|
||
|
|
-- the NVT ASCII character set. By convention, objects with this
|
||
|
|
-- syntax are declared as having:
|
||
|
|
--
|
||
|
|
-- SIZE (0..255)
|
||
|
|
|
||
|
|
-- PhysAddress ::= OCTET STRING
|
||
|
|
-- This data type is used to model media addresses. For many
|
||
|
|
-- types of media, this will be in a binary representation. For
|
||
|
|
-- example, an Ethernet address would be represented as a string
|
||
|
|
-- of 6 octets.
|
||
|
|
|
||
|
|
fnb2 OBJECT IDENTIFIER ::= { subSysMMAC 2 }
|
||
|
|
chassis OBJECT IDENTIFIER ::= { subSysMMAC 3 }
|
||
|
|
environment OBJECT IDENTIFIER ::= { subSysMMAC 4 }
|
||
|
|
fnbTR OBJECT IDENTIFIER ::= { fnb2 1 }
|
||
|
|
fnbCSMACD OBJECT IDENTIFIER ::= { fnb2 2 }
|
||
|
|
fnbPortConnect OBJECT IDENTIFIER ::= { fnb2 3 }
|
||
|
|
nB55 OBJECT IDENTIFIER ::= { subSysDevice 3 }
|
||
|
|
mRXI OBJECT IDENTIFIER ::= { subSysDevice 6 }
|
||
|
|
iRM3 OBJECT IDENTIFIER ::= { subSysDevice 7 }
|
||
|
|
tRMM OBJECT IDENTIFIER ::= { subSysDevice 8 }
|
||
|
|
eMME OBJECT IDENTIFIER ::= { subSysDevice 9 }
|
||
|
|
fPRedundancy OBJECT IDENTIFIER ::= { subSysDevice 10 }
|
||
|
|
upsVersion OBJECT IDENTIFIER ::= { ups 1 }
|
||
|
|
upsRevision OBJECT IDENTIFIER ::= { upsVersion 1 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- The commonRev1 group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for all Cabletron
|
||
|
|
-- devices.
|
||
|
|
|
||
|
|
deviceType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
iRM2(176), -- integrated repeater and
|
||
|
|
-- management subsystem, version 2
|
||
|
|
iRBM(177), -- integrated repeater, bridge,
|
||
|
|
-- and management subsystem
|
||
|
|
iRM3(178), -- integrated repeater and
|
||
|
|
-- management subsystem, version 3
|
||
|
|
tRMBM-R(179), -- token ring repeater, management,
|
||
|
|
-- and bridge subsystem, type R
|
||
|
|
tRMBM-S(180), -- token ring repeater, management,
|
||
|
|
-- and bridge subsystem, type S
|
||
|
|
emm-E(185), -- ethernet repeater, management,
|
||
|
|
-- and bridge subsystem
|
||
|
|
tRMM(187), -- token ring repeater and
|
||
|
|
-- management subsystem
|
||
|
|
trmMim(190), -- token ring repeater MIM
|
||
|
|
mrxi24(65569), -- integrated repeater and
|
||
|
|
-- management subsytem with 24
|
||
|
|
-- 10BaseT ports (RJ45), 2 EPIMs
|
||
|
|
mrxi22(65570), -- integrated repeater and
|
||
|
|
-- management subsytem with 12
|
||
|
|
-- 10BaseT ports (RJ45), 1 EPIM
|
||
|
|
mrxi34(65571), -- integrated repeater and
|
||
|
|
-- management subsytem with 24
|
||
|
|
-- 10BaseT ports (50-POS CHAMP), 1 EPIM
|
||
|
|
mrxi38(65572) -- integrated repeater and
|
||
|
|
-- management subsytem with 48
|
||
|
|
-- 10BaseT ports (50-POS CHAMP), 2 EPIMs
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of management board."
|
||
|
|
::= { commonRev1 1 }
|
||
|
|
|
||
|
|
deviceName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A textual description on the entity managed by the
|
||
|
|
resident agent. It is mandatory that this only con-
|
||
|
|
tain printable ASCII characters."
|
||
|
|
::= { commonRev1 2 }
|
||
|
|
|
||
|
|
deviceIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Network address, in this case the IP address,
|
||
|
|
of the device. This object is required for use by
|
||
|
|
the Local Management Interface."
|
||
|
|
::= { commonRev1 3 }
|
||
|
|
|
||
|
|
deviceTime OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(8))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The current time of day, in 24 hour format, as
|
||
|
|
measured by the device. The representation shall
|
||
|
|
use the standard HHMMSS format."
|
||
|
|
::= { commonRev1 4 }
|
||
|
|
|
||
|
|
deviceDate OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(8))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The current date, as measured by the device. The
|
||
|
|
representation shall use the standard MMDDYYYY
|
||
|
|
format."
|
||
|
|
::= { commonRev1 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The fnbTR group implementation of this group is optional
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for Token Ring
|
||
|
|
-- subsystems on devices that incorporate the FNB.
|
||
|
|
|
||
|
|
fnbTRTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FnbTREntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of entries that provide connection status of
|
||
|
|
Token Ring subsystems, for the FNB."
|
||
|
|
::= { fnbTR 1 }
|
||
|
|
|
||
|
|
fnbTREntry OBJECT-TYPE
|
||
|
|
SYNTAX FnbTREntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the fnbTRTable containing objects that
|
||
|
|
provide FNB connection status for a Token Ring sub-
|
||
|
|
system."
|
||
|
|
INDEX { fnbTRIndex }
|
||
|
|
::= { fnbTRTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
FnbTREntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
fnbTRIndex
|
||
|
|
INTEGER,
|
||
|
|
fnbConnectLeft
|
||
|
|
INTEGER,
|
||
|
|
fnbConnectRight
|
||
|
|
INTEGER,
|
||
|
|
fnbBypass
|
||
|
|
INTEGER,
|
||
|
|
fnbRPBypass
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
fnbTRIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An unique value for each Token Ring subsystem. Its
|
||
|
|
value ranges between 1 and chassisSlots. The value
|
||
|
|
for each interface must remain constant, at least,
|
||
|
|
from one re-initialization of the entity's network
|
||
|
|
management system to the next re-initialization."
|
||
|
|
::= { fnbTREntry 1 }
|
||
|
|
|
||
|
|
fnbConnectLeft OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
detached(1),
|
||
|
|
attached(2),
|
||
|
|
faulted(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Connected Left board (board n + 1) has the following
|
||
|
|
states:
|
||
|
|
|
||
|
|
Detached == 1 (Management (only management) detached,
|
||
|
|
read/write).
|
||
|
|
Attached == 2 (Management/AutoMode attached, read/write).
|
||
|
|
Faulted == 3 (Management/AutoMode tried to attach but
|
||
|
|
failed READ ONLY)."
|
||
|
|
::= { fnbTREntry 2 }
|
||
|
|
|
||
|
|
fnbConnectRight OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
detached(1),
|
||
|
|
attached(2),
|
||
|
|
faulted(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The Connected Right board (board n - 1) has the following states:
|
||
|
|
|
||
|
|
Detached == 1 (Management (only management) detached, read/write).
|
||
|
|
Attached == 2 (Management/AutoMode attached, read/write ).
|
||
|
|
Faulted == 3 (Management/AutoMode tried to attach but failed,
|
||
|
|
READ ONLY)."
|
||
|
|
::= { fnbTREntry 3 }
|
||
|
|
|
||
|
|
fnbBypass OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
off(1), -- not bypassed
|
||
|
|
on(2) -- bypassed
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the bypass status of the current Token Ring
|
||
|
|
board. Bypassed means the board is NOT attached to the
|
||
|
|
FNB."
|
||
|
|
::= { fnbTREntry 4 }
|
||
|
|
|
||
|
|
fnbRPBypass OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
disabled(2),
|
||
|
|
enabled(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the Ring Port bypass status of the current Token Ring
|
||
|
|
board. If this capability is not available on this board, the
|
||
|
|
value 'other' is returned when read, and BADSETINFO when written."
|
||
|
|
::= { fnbTREntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The fnbCSMACD group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for CSMA/CD
|
||
|
|
-- subsystems on devices that incorporate the FNB.
|
||
|
|
|
||
|
|
fnbCSMACDTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FnbCSMACDEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of entries that provide connection status of
|
||
|
|
CSMA/CD subsystems, for the FNB."
|
||
|
|
::= { fnbCSMACD 1 }
|
||
|
|
|
||
|
|
fnbCSMACDEntry OBJECT-TYPE
|
||
|
|
SYNTAX FnbCSMACDEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the fnbCSMACDTable containing objects
|
||
|
|
that provide FNB connection status for a CSMA/CD
|
||
|
|
subsystem."
|
||
|
|
INDEX { fnbCSMACDIndex }
|
||
|
|
::= { fnbCSMACDTable 1 }
|
||
|
|
|
||
|
|
FnbCSMACDEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
fnbCSMACDIndex
|
||
|
|
INTEGER,
|
||
|
|
fnbConnect
|
||
|
|
INTEGER,
|
||
|
|
fnbPortChanges
|
||
|
|
Counter
|
||
|
|
}
|
||
|
|
|
||
|
|
fnbCSMACDIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An unique value for each CSMACD subsystem. Its
|
||
|
|
value ranges between 1 and chassisSlots. The value
|
||
|
|
for each interface must remain constant, at least,
|
||
|
|
from one re-initialization of the entity's network
|
||
|
|
management system to the next re-initialization."
|
||
|
|
::= { fnbCSMACDEntry 1 }
|
||
|
|
|
||
|
|
fnbConnect OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
connectB(1),
|
||
|
|
connectC(2),
|
||
|
|
disconnect(3),
|
||
|
|
connectA(4),
|
||
|
|
subnetB(5),
|
||
|
|
subnetC(6),
|
||
|
|
multiChannel(7),
|
||
|
|
frontPanel(8)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the connection status of the CSMA/CD board
|
||
|
|
to the inter-RIC bus."
|
||
|
|
::= { fnbCSMACDEntry 2 }
|
||
|
|
|
||
|
|
fnbPortChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the number of times any port on the
|
||
|
|
given MIM has changed it's connection to the
|
||
|
|
inter-RIC bus."
|
||
|
|
::= { fnbCSMACDEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The fnbPortConnect group. This group is required only for those devices
|
||
|
|
-- that support port switching
|
||
|
|
|
||
|
|
fnbPortConnectTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FnbPortConnectEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This table is used to control port
|
||
|
|
association on ethernet devices. Only
|
||
|
|
those boards that support port switching
|
||
|
|
will be listed in this table."
|
||
|
|
::= { fnbPortConnect 1 }
|
||
|
|
|
||
|
|
fnbPortConnectEntry OBJECT-TYPE
|
||
|
|
SYNTAX FnbPortConnectEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Describes a specific port connection entry."
|
||
|
|
INDEX { fnbPortConnectBoardIndex, fnbPortConnectPortIndex }
|
||
|
|
::= { fnbPortConnectTable 1 }
|
||
|
|
|
||
|
|
FnbPortConnectEntry ::= SEQUENCE {
|
||
|
|
fnbPortConnectBoardIndex
|
||
|
|
INTEGER,
|
||
|
|
fnbPortConnectPortIndex
|
||
|
|
INTEGER,
|
||
|
|
fnbPortConnectPortAssignment
|
||
|
|
INTEGER,
|
||
|
|
fnbPortConnectCompID
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
fnbPortConnectBoardIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An instance of a board for which this port
|
||
|
|
assignment relationship exists."
|
||
|
|
::= { fnbPortConnectEntry 1 }
|
||
|
|
|
||
|
|
fnbPortConnectPortIndex OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An instance of a port for which this
|
||
|
|
assignment relationship exists."
|
||
|
|
::= { fnbPortConnectEntry 2 }
|
||
|
|
|
||
|
|
fnbPortConnectPortAssignment OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
connectA(1),
|
||
|
|
connectB(2),
|
||
|
|
connectC(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The specific channel that the port is
|
||
|
|
assigned."
|
||
|
|
::= { fnbPortConnectEntry 3 }
|
||
|
|
|
||
|
|
fnbPortConnectCompID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the component ID as defined in the chassis
|
||
|
|
MIB that this port is associated with. These
|
||
|
|
components will be repeater components."
|
||
|
|
::= { fnbPortConnectEntry 4 }
|
||
|
|
|
||
|
|
fnbPortConnectionChanges OBJECT-TYPE
|
||
|
|
SYNTAX Counter
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Maintains the number of times any port within
|
||
|
|
the mangement domain of this MIM changes it's
|
||
|
|
port assignment."
|
||
|
|
::= { fnbPortConnect 2 }
|
||
|
|
|
||
|
|
-- The chassis group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for all cabletron
|
||
|
|
-- devices. Except for bounded slotless entities.
|
||
|
|
|
||
|
|
chassisHWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Define the hardware revision of the device or sys-
|
||
|
|
tem chassis."
|
||
|
|
::= { chassis 1 }
|
||
|
|
|
||
|
|
chassisType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
mMAC8FNB(2), -- non shunting
|
||
|
|
mMAC5FNB(3), -- non shunting
|
||
|
|
mMAC3FNB(4), -- non shunting
|
||
|
|
mINIMMAC(5),
|
||
|
|
mRXI(6),
|
||
|
|
m3FNB(7), -- shunting
|
||
|
|
m5FNB(8), -- shunting
|
||
|
|
m8FNB(9), -- non shunting
|
||
|
|
nonFNB(10),
|
||
|
|
mMAC3FNBS(11), -- shunting
|
||
|
|
mMAC5FNBS(12), -- shunting
|
||
|
|
mMAC8FNBS(13), -- shunting
|
||
|
|
m8FNBS(14) -- shunting
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the type of chassis."
|
||
|
|
::= { chassis 2 }
|
||
|
|
|
||
|
|
chassisSlots OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the number of available chassis slots."
|
||
|
|
::= { chassis 3 }
|
||
|
|
|
||
|
|
chassisFNB OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
absent(1),
|
||
|
|
present(2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the presence or absence of the FNB."
|
||
|
|
::= { chassis 4 }
|
||
|
|
|
||
|
|
chassisAlarmEna OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable(1),
|
||
|
|
enable(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Allow an audible alarm to be either enabled or dis-
|
||
|
|
abled."
|
||
|
|
::= { chassis 5 }
|
||
|
|
|
||
|
|
chassisAlarmState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
chassisNoFaultCondition(1),
|
||
|
|
chassisFaultCondition(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the current condition of the power supply
|
||
|
|
fault detection circuit. Setting a value of
|
||
|
|
chassisNoFaultCondition(1) disables the current
|
||
|
|
chassis alarm condition, and stops the current
|
||
|
|
audible alarm from sounding. Setting a value of
|
||
|
|
chassisFaultCondition(2) is not allowed.
|
||
|
|
|
||
|
|
This object will read with the value of
|
||
|
|
chassisNoFaultCondition(1) when the chassis is
|
||
|
|
currently operating with no power faults detected.
|
||
|
|
|
||
|
|
This object will read with the value of
|
||
|
|
chassisFaultCondition(2) when the chassis is
|
||
|
|
currently in a power fault condition."
|
||
|
|
::= { chassis 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The environment group
|
||
|
|
|
||
|
|
-- Implementation of this group is optional
|
||
|
|
|
||
|
|
powerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF PowerEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of power supply entries."
|
||
|
|
::= { environment 1 }
|
||
|
|
|
||
|
|
powerEntry OBJECT-TYPE
|
||
|
|
SYNTAX PowerEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the powerTable providing objects for a
|
||
|
|
power supply."
|
||
|
|
INDEX { powerSupplyNum }
|
||
|
|
::= { powerTable 1 }
|
||
|
|
|
||
|
|
PowerEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
powerSupplyNum
|
||
|
|
INTEGER,
|
||
|
|
powerSupplyState
|
||
|
|
INTEGER,
|
||
|
|
powerSupplyId
|
||
|
|
OBJECT IDENTIFIER,
|
||
|
|
powerSupplyRedun
|
||
|
|
INTEGER,
|
||
|
|
powerSupplyRemoteDisable
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
powerSupplyNum OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the power supply that may have failed."
|
||
|
|
::= { powerEntry 1 }
|
||
|
|
|
||
|
|
powerSupplyState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
infoNotAvailable(1),
|
||
|
|
notInstalled(2),
|
||
|
|
installedAndOperating(3),
|
||
|
|
installedAndNotOperating(4)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the power supply's state."
|
||
|
|
::= { powerEntry 2 }
|
||
|
|
|
||
|
|
powerSupplyId OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies the type of power supply. For example, this
|
||
|
|
could be used to identify power supplies which support
|
||
|
|
additional remote management capabilities."
|
||
|
|
::= { powerEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
powerSupplyRedun OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
redundancyAvail(1),
|
||
|
|
redundancyNotAvail(2),
|
||
|
|
infoNotAvailable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies whether power redundancy is available
|
||
|
|
within the chassis.
|
||
|
|
|
||
|
|
Devices that do not support power supply redundancy,
|
||
|
|
will return infoNotAvailable."
|
||
|
|
::= { powerEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
powerSupplyRemoteDisable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enable(1),
|
||
|
|
disable(2),
|
||
|
|
infoNotAvailable(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Provides Enable/Disable control of the power supply.
|
||
|
|
|
||
|
|
For devices that do not support this capability, a set
|
||
|
|
attempt will return BADVALUE, and a read will always
|
||
|
|
return infoNotAvailable."
|
||
|
|
|
||
|
|
::= { powerEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The nB55 group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for the nB55 device.
|
||
|
|
|
||
|
|
nB55HWAddress OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The device's MAC address."
|
||
|
|
REFERENCE
|
||
|
|
"This value is the same as ifPhysAddress in RFC
|
||
|
|
1213."
|
||
|
|
::= { nB55 1 }
|
||
|
|
|
||
|
|
nB55HWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of the nB55 board. A value of
|
||
|
|
one denotes Revision 1, a value of two denotes Revi-
|
||
|
|
sion 2, and so on."
|
||
|
|
::= { nB55 2 }
|
||
|
|
|
||
|
|
nB55FWRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(2))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { nB55 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The mRXI group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for the mRXI device.
|
||
|
|
|
||
|
|
mRXIHWAddress OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The device's MAC address."
|
||
|
|
REFERENCE
|
||
|
|
"This value is the same as ifPhysAddress in RFC
|
||
|
|
1213."
|
||
|
|
::= { mRXI 1 }
|
||
|
|
|
||
|
|
mRXIHWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of the mRXI board. A value of
|
||
|
|
one denotes Revision 1, a value of two denotes Revi-
|
||
|
|
sion 2, and so on."
|
||
|
|
::= { mRXI 2 }
|
||
|
|
|
||
|
|
mRXIFWRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(2))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { mRXI 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The iRM3 group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for the iRM3 device.
|
||
|
|
|
||
|
|
iRM3HWAddress OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The device's MAC address."
|
||
|
|
REFERENCE
|
||
|
|
"This value is the same as ifPhysAddress in RFC
|
||
|
|
1213."
|
||
|
|
::= { iRM3 1 }
|
||
|
|
|
||
|
|
iRM3HWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of the IRM3 board. A value of
|
||
|
|
one denotes Revision 1, a value of two denotes Revi-
|
||
|
|
sion 2, and so on."
|
||
|
|
::= { iRM3 2 }
|
||
|
|
|
||
|
|
iRM3FWRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(2))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { iRM3 3 }
|
||
|
|
|
||
|
|
|
||
|
|
iRM3PortAssoc OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
aoffFrp(5), -- AUI is repeater, fiber
|
||
|
|
-- is off
|
||
|
|
arpFoff(6) -- AUI is off, fiber
|
||
|
|
-- is repeater
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls how front panel ports are associated
|
||
|
|
with the Irm3."
|
||
|
|
::= { iRM3 4 }
|
||
|
|
|
||
|
|
iRM3BPSupport OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
notSupported (1),
|
||
|
|
supported (2)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes whether or not Backplane Protocol Support is
|
||
|
|
present in the current version of the IRM3."
|
||
|
|
::= { iRM3 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The tRMM group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for the tRMM device.
|
||
|
|
|
||
|
|
tRMMHWAddress OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The device's MAC address."
|
||
|
|
REFERENCE
|
||
|
|
"This value is the same as ifPhysAddress in RFC
|
||
|
|
1213."
|
||
|
|
::= { tRMM 1 }
|
||
|
|
|
||
|
|
tRMMHWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of the tRMM board. A value of
|
||
|
|
one denotes Revision 1, a value of two denotes Revi-
|
||
|
|
sion 2, and so on."
|
||
|
|
::= { tRMM 2 }
|
||
|
|
|
||
|
|
tRMMFWRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(2))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { tRMM 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The eMME group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for the eMME device.
|
||
|
|
|
||
|
|
eMMEHWAddress OBJECT-TYPE
|
||
|
|
SYNTAX PhysAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The device's MAC address."
|
||
|
|
REFERENCE
|
||
|
|
"This value is the same as ifPhysAddress in RFC
|
||
|
|
1213."
|
||
|
|
::= { eMME 1 }
|
||
|
|
|
||
|
|
eMMEHWRev OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of the eMME board. A value of
|
||
|
|
one denotes Revision 1, a value of two denotes Revi-
|
||
|
|
sion 2, and so on."
|
||
|
|
::= { eMME 2 }
|
||
|
|
|
||
|
|
eMMEFWRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..10))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { eMME 3 }
|
||
|
|
|
||
|
|
eMMEBoardMap OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes a bit encoded representation of the slots that
|
||
|
|
contain MIM boards. If a bit is a one then the board
|
||
|
|
is present."
|
||
|
|
::= { eMME 4 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The fPredund group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for devices with
|
||
|
|
-- front panel redundancy.
|
||
|
|
|
||
|
|
fPRedund OBJECT IDENTIFIER ::= { fPRedundancy 1 }
|
||
|
|
|
||
|
|
fPRedundReset OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noReset(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"If this object is set to Reset it will cause a reset
|
||
|
|
of the front panel redundancy. Setting this object to
|
||
|
|
NoReset will do nothing. This object will always be
|
||
|
|
read as NoReset."
|
||
|
|
::= { fPRedund 1 }
|
||
|
|
|
||
|
|
fPRedundPollInterval OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Get/Set the number of seconds between polls for front
|
||
|
|
panel redundancy."
|
||
|
|
::= { fPRedund 2 }
|
||
|
|
|
||
|
|
fPRedundRetrys OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Get/Set the the number of unanswered polls allowed for
|
||
|
|
the front panel redundancy before it switches ports."
|
||
|
|
::= { fPRedund 3 }
|
||
|
|
|
||
|
|
fPRedundNumAddr OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Get the number of IP Addresses associated with front panel
|
||
|
|
redundancy."
|
||
|
|
::= { fPRedund 4 }
|
||
|
|
|
||
|
|
fPRedundAddAddr OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Add an IP Address to the polling list for the front panel
|
||
|
|
redundancy."
|
||
|
|
::= { fPRedund 5 }
|
||
|
|
|
||
|
|
fPRedundDelAddr OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Delete an IP Address from the polling list for the
|
||
|
|
front panel redundancy."
|
||
|
|
::= { fPRedund 6 }
|
||
|
|
|
||
|
|
fPRedundActivePort OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Get/Set the front panel port you want to be active
|
||
|
|
when front panel redundancy is enabled."
|
||
|
|
::= { fPRedund 7 }
|
||
|
|
|
||
|
|
fPRedundEnable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
disable(1),
|
||
|
|
enable(2)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"If this object is set to enable, the front panel
|
||
|
|
redundancy will be activated. If this object is set
|
||
|
|
to disable, the front panel redundancy will be
|
||
|
|
deactivated. When read, this object will returns the
|
||
|
|
state of the object based on the last request
|
||
|
|
made."
|
||
|
|
::= { fPRedund 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The fPredundAddr group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for devices with
|
||
|
|
-- front panel redundancy.
|
||
|
|
|
||
|
|
fPRedundAddrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FPRedundAddrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of entries that provide IP address
|
||
|
|
information for front panel redundancy."
|
||
|
|
::= { fPRedundancy 2 }
|
||
|
|
|
||
|
|
fPRedundAddrEntry OBJECT-TYPE
|
||
|
|
SYNTAX FPRedundAddrEntry
|
||
|
|
ACCESS not-accessible
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the fPRedundAddrTable providing objects
|
||
|
|
for front panel redundancy."
|
||
|
|
INDEX { fPRedundAddrId }
|
||
|
|
::= { fPRedundAddrTable 1 }
|
||
|
|
|
||
|
|
FPRedundAddrEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
fPRedundAddrId
|
||
|
|
INTEGER,
|
||
|
|
fPRedundAddrIPAddr
|
||
|
|
NetworkAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
fPRedundAddrId OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value identifying an element in a sequence of
|
||
|
|
member IP Addresses which belong to the front panel
|
||
|
|
redundancy. This value goes from 1 to the maximum
|
||
|
|
number of IP Addresses which may be included in
|
||
|
|
front panel redundancy."
|
||
|
|
::= { fPRedundAddrEntry 1 }
|
||
|
|
|
||
|
|
fPRedundAddrIPAddr OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Returns an IP Address associated with the front panel
|
||
|
|
redundancy."
|
||
|
|
::= { fPRedundAddrEntry 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The ups group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for devices that
|
||
|
|
-- incorporate uninterruptible power supplies.
|
||
|
|
|
||
|
|
|
||
|
|
upsID OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
aPCModel370(257),
|
||
|
|
aPCModel400(258),
|
||
|
|
aPCModel600(259),
|
||
|
|
aPCModel900(260),
|
||
|
|
aPCModel1250(261),
|
||
|
|
aPCModel2000(262)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes a type code which refers to the manufactur-
|
||
|
|
ers and model of the UPS."
|
||
|
|
::= { upsRevision 1 }
|
||
|
|
|
||
|
|
upsUpTime OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the operating time, in hours, since the UPS
|
||
|
|
was last powered on."
|
||
|
|
::= { upsRevision 2 }
|
||
|
|
|
||
|
|
upsDisable OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"Allows the UPS to be disabled. A set turns of the
|
||
|
|
UPS for those systems, so equipped. A get/get-next
|
||
|
|
always returns 0."
|
||
|
|
::= { upsRevision 3 }
|
||
|
|
|
||
|
|
upsDisconnect OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Allows the UPS backup power system to conserve its
|
||
|
|
battery. Setting the object to a value of 1 turns off
|
||
|
|
the power system. A get/get-next always retuns a 0."
|
||
|
|
::= { upsRevision 4 }
|
||
|
|
|
||
|
|
upsTest OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unitOK(1),
|
||
|
|
unitFailed(2),
|
||
|
|
badBattery(3),
|
||
|
|
noRecentTest(4), -- no test performed in the last five
|
||
|
|
-- minutes
|
||
|
|
underTest(5)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the status performed on the UPS. A write
|
||
|
|
unitOK(1) intiates the test. A read indicates status of
|
||
|
|
test."
|
||
|
|
::= { upsRevision 5 }
|
||
|
|
|
||
|
|
upsBatteryCapacity OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the percentage of battery capacity left,
|
||
|
|
100% being a fully-charged battery."
|
||
|
|
::= { upsRevision 6 }
|
||
|
|
|
||
|
|
upsACLineVoltsIn OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the input AC utility line voltage."
|
||
|
|
::= { upsRevision 7 }
|
||
|
|
|
||
|
|
upsBatteryVoltsOut OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the battery voltage."
|
||
|
|
::= { upsRevision 8 }
|
||
|
|
|
||
|
|
|
||
|
|
-- The dl group
|
||
|
|
|
||
|
|
-- Implementation of this group is mandatory for systems
|
||
|
|
-- that provide the ability to download firmware."
|
||
|
|
|
||
|
|
|
||
|
|
dlForceOnBoot OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"When set to a 1, the system will request a
|
||
|
|
download, during the next system restart.
|
||
|
|
If no server is found and the current image
|
||
|
|
in flash memory is valid, the system will boot
|
||
|
|
using the flash-resident image."
|
||
|
|
::= { dl 1 }
|
||
|
|
|
||
|
|
dlCommitRAMToFlash OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"When written with a 1, the boot software will erase
|
||
|
|
flash memory, compress the downloaded code, and save
|
||
|
|
the compressed image into flash memory. Upon com-
|
||
|
|
pletion of this operation, the flash memory driver
|
||
|
|
resets this object to 0, indicating completion of
|
||
|
|
the programming operation."
|
||
|
|
::= { dl 2 }
|
||
|
|
|
||
|
|
dlInitiateColdBoot OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"When written with a 1, the boot software intiates a
|
||
|
|
system reboot. All MIB variables used to control
|
||
|
|
the exact nature of the download should be set,
|
||
|
|
prior to activating a system reset.
|
||
|
|
|
||
|
|
A read always returns a 0."
|
||
|
|
::= { dl 3 }
|
||
|
|
|
||
|
|
dlTFTPRequestHost OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the server to be used, when
|
||
|
|
firmware is to be loaded across the network."
|
||
|
|
::= { dl 4 }
|
||
|
|
|
||
|
|
dlTFTPRequest OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The filename requested of the server, when firmware
|
||
|
|
is to be loaded across the network."
|
||
|
|
::= { dl 5 }
|
||
|
|
|
||
|
|
dlLastImageFilename OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Filename of the last image to be successfully
|
||
|
|
loaded into memory."
|
||
|
|
::= { dl 6 }
|
||
|
|
|
||
|
|
dlLastServerIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the server used to load the
|
||
|
|
present image in flash memory."
|
||
|
|
::= { dl 7 }
|
||
|
|
|
||
|
|
dlFlashSize OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the size, in bytes, of flash memory con-
|
||
|
|
tained on this module."
|
||
|
|
::= { dl 8 }
|
||
|
|
|
||
|
|
dlFlashCount OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the number of times that flash memory has
|
||
|
|
been reprogrammed. This value is initialzed to 1,
|
||
|
|
when the module is initially powered up."
|
||
|
|
::= { dl 9 }
|
||
|
|
|
||
|
|
dlFirmwareBase OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the starting address of the firmware in
|
||
|
|
RAM."
|
||
|
|
::= { dl 10 }
|
||
|
|
|
||
|
|
dlFirmwareTop OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the ending address of firmware in RAM."
|
||
|
|
::= { dl 11 }
|
||
|
|
|
||
|
|
dlFirmwareStart OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the start address of the firmware, in RAM,
|
||
|
|
as established by the boot process."
|
||
|
|
::= { dl 12 }
|
||
|
|
|
||
|
|
dlBootRev OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..10))
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Denotes the revision of boot firmware in the module.
|
||
|
|
The first octets provides the version, and the
|
||
|
|
second provides the revision."
|
||
|
|
::= { dl 13 }
|
||
|
|
|
||
|
|
dlForceBootp OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"When set, this variable forces the client to send a
|
||
|
|
BOOTP request packet when rebooting. The client will
|
||
|
|
make several attempts before timing out if a server
|
||
|
|
does not respond. This variable stays set. When set to
|
||
|
|
a 1 it should always be read as a one. When set to zero
|
||
|
|
it should always be read as zero."
|
||
|
|
::= { dl 14 }
|
||
|
|
|
||
|
|
dlServerName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This OID is reserved for future use of the Bootp server
|
||
|
|
name. This field can be used when a client wants to get
|
||
|
|
boot information from a particular bootp server."
|
||
|
|
::= { dl 15 }
|
||
|
|
|
||
|
|
dlOnLineDownLoad OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
normalOperation(1),
|
||
|
|
forceDownLoad(2),
|
||
|
|
forceDownLoadReset(3)
|
||
|
|
}
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"During normal operation this object has the value of 1. By
|
||
|
|
setting this object to a value of forceDownLoad(2) an online
|
||
|
|
download will be performed. By setting this object to a
|
||
|
|
value of forceDownLoadReset(3) an online down load will be
|
||
|
|
performed and a reset will be forced upon successful completion
|
||
|
|
of the download."
|
||
|
|
::= { dl 16 }
|
||
|
|
|
||
|
|
dlOperStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1), -- none of the following
|
||
|
|
unknown(2),
|
||
|
|
normalOperation(3),
|
||
|
|
downLoadActive(4),
|
||
|
|
downLoadCompleteError(5)
|
||
|
|
}
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"This object reflects the status of the download code. A
|
||
|
|
value of normalOperation(3) reflects either a down load was
|
||
|
|
started but has finished normally and no reset was specified
|
||
|
|
or no down load has been started. A value of downLoadActive
|
||
|
|
only appears while a down load is in progress. A value of
|
||
|
|
downLoadCompleteError reflects that a down load was started
|
||
|
|
however an error was detected."
|
||
|
|
::= { dl 17 }
|
||
|
|
|
||
|
|
dlNetAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"IP Address of the server to be used when an image is to be
|
||
|
|
downloaded using the Runtime TFTP Download."
|
||
|
|
::= { dl 18 }
|
||
|
|
|
||
|
|
dlFileName OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"Filename requested of the server when an image is to be
|
||
|
|
downloaded using the Runtime TFTP Download. This should be a
|
||
|
|
complete path filename."
|
||
|
|
::= { dl 19 }
|
||
|
|
|
||
|
|
dlErrorString OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
ACCESS read-only
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"If the value of ctDLOperStatus is downloadCompleteError(5)
|
||
|
|
then this object will provide a more complete description of
|
||
|
|
the error. Otherwise this object will be the zero length
|
||
|
|
string."
|
||
|
|
::= { dl 20 }
|
||
|
|
|
||
|
|
dlTftpServerGatewayIPAddress OBJECT-TYPE
|
||
|
|
SYNTAX NetworkAddress
|
||
|
|
ACCESS read-write
|
||
|
|
STATUS mandatory
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the gateway/router which connects
|
||
|
|
this SNMP agent to the TFTP server."
|
||
|
|
::= { dl 21 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Enterprise specific trap definitions
|
||
|
|
|
||
|
|
-- Trap Description
|
||
|
|
-- fPRedundActivePort
|
||
|
|
|
||
|
|
-- Specific Trap Type Code - 0x15F
|
||
|
|
|
||
|
|
-- This trap indicates that a new port has been activated for the front panel
|
||
|
|
-- redundant circuit. This does NOT indicate this port is usable, but is being
|
||
|
|
-- tested.
|
||
|
|
|
||
|
|
-- The interesting information will include:
|
||
|
|
-- Active Port Number
|
||
|
|
--
|
||
|
|
-- aPCLineFail OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated in the event of an AC util-
|
||
|
|
-- ity line failure."
|
||
|
|
-- ::= 0x1101
|
||
|
|
--
|
||
|
|
-- aPCLineFailRecovery OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated when the UPS switches back
|
||
|
|
-- to line, and only if the aPCLineFail trap was issued
|
||
|
|
-- first."
|
||
|
|
-- ::= 0x1102
|
||
|
|
--
|
||
|
|
-- aPCLowBattery OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated in the event that the UPS'
|
||
|
|
-- battery is found to be low."
|
||
|
|
-- ::= 0x1103
|
||
|
|
--
|
||
|
|
-- aPCLowBatteryRecovery OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated when the UPS' battery has
|
||
|
|
-- charged above the low-battery point, and only if the
|
||
|
|
-- aPCLowBattery trap was issued first."
|
||
|
|
-- ::= 0x1104
|
||
|
|
--
|
||
|
|
-- aPCAbnormalCondition OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated in the event that the UPS
|
||
|
|
-- has entered an abnormal condition, such as an over-
|
||
|
|
-- load or trip on low battery. This trap is also
|
||
|
|
-- sent, when the UPS is first turned on."
|
||
|
|
-- ::= 0x1105
|
||
|
|
--
|
||
|
|
-- aPCAbnormalConditionRecovery OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated when the UPS has recovered
|
||
|
|
-- from an abnormal condition, and only if the aPCAb-
|
||
|
|
-- normalCondition trap was issued first."
|
||
|
|
-- ::= 0x1106
|
||
|
|
--
|
||
|
|
-- aPCShuttingDown OBJECT-TYPE
|
||
|
|
-- ENTERPRISE cabletron
|
||
|
|
-- DESCRIPTION
|
||
|
|
-- "This trap is generated in the event that the UPS
|
||
|
|
-- has been ordered to shut itself, or the load, off
|
||
|
|
-- over the serial line."
|
||
|
|
-- ::= 0x1107
|
||
|
|
--
|
||
|
|
--
|
||
|
|
|
||
|
|
END
|