david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/enterasys/CTRON-DECIV-ROUTER-MIB

2473 lines
95 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CTRON-DECIV-ROUTER-MIB DEFINITIONS ::= BEGIN
-- ctron-deciv-router-mib.txt
-- Revision: 1.01.03
-- Part Number: 2170985
-- Date: August 11, 1995
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific DECnet Routing Services MIB.
--
-- This module will be extended as required.
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
nwRtrProtoSuites
FROM ROUTER-OIDS
Counter, TimeTicks, Gauge
FROM RFC1155-SMI;
-- The DECnet Phase IV Router Group.
nwDecIVRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 3 }
nwDecIVMibs OBJECT IDENTIFIER ::= { nwDecIVRouter 1 }
nwDecIVComponents OBJECT IDENTIFIER ::= { nwDecIVRouter 2 }
-- DECnet Phase IV Router Component Groups
nwDecIVSystem OBJECT IDENTIFIER ::= { nwDecIVComponents 1 }
nwDecIVForwarding OBJECT IDENTIFIER ::= { nwDecIVComponents 2 }
nwDecIVTopology OBJECT IDENTIFIER ::= { nwDecIVComponents 4 }
nwDecIVFib OBJECT IDENTIFIER ::= { nwDecIVComponents 5 }
nwDecIVEndSystems OBJECT IDENTIFIER ::= { nwDecIVComponents 6 }
nwDecIVAccessControl OBJECT IDENTIFIER ::= { nwDecIVComponents 7 }
nwDecIVFilters OBJECT IDENTIFIER ::= { nwDecIVComponents 8 }
nwDecIVRedirector OBJECT IDENTIFIER ::= { nwDecIVComponents 9 }
nwDecIVEvent OBJECT IDENTIFIER ::= { nwDecIVComponents 10 }
nwDecIVWorkGroup OBJECT IDENTIFIER ::= { nwDecIVComponents 11 }
-- DECnet Phase IV Router System Groups
nwDecIVSysConfig OBJECT IDENTIFIER ::= { nwDecIVSystem 1 }
nwDecIVSysAdministration OBJECT IDENTIFIER ::= { nwDecIVSystem 2 }
-- DECnet Phase IV Router Forwarding Groups
nwDecIVFwdSystem OBJECT IDENTIFIER ::= { nwDecIVForwarding 1 }
nwDecIVFwdInterfaces OBJECT IDENTIFIER ::= { nwDecIVForwarding 2 }
nwDecIVFwdCounters OBJECT IDENTIFIER ::= { nwDecIVFwdSystem 1 }
nwDecIVFwdIfConfig OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 1 }
nwDecIVFwdIfCounters OBJECT IDENTIFIER ::= { nwDecIVFwdInterfaces 2 }
-- DECnet Phase IV Router Routing Groups
nwDecIVDistanceVector OBJECT IDENTIFIER ::= { nwDecIVTopology 1 }
nwDecIVLinkState OBJECT IDENTIFIER ::= { nwDecIVTopology 2 }
nwDecIVProto OBJECT IDENTIFIER ::= { nwDecIVDistanceVector 1 }
nwDecIVProtoSystem OBJECT IDENTIFIER ::= { nwDecIVProto 1 }
nwDecIVProtoInterface OBJECT IDENTIFIER ::= { nwDecIVProto 2 }
nwDecIVProtoConfig OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 1 }
nwDecIVProtoCounters OBJECT IDENTIFIER ::= { nwDecIVProtoSystem 2 }
nwDecIVProtoIfConfig OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 1 }
nwDecIVProtoIfCounters OBJECT IDENTIFIER ::= { nwDecIVProtoInterface 2 }
-- DECnet Phase IV Router Host End Systems Groups
nwDecIVHostsSystem OBJECT IDENTIFIER ::= { nwDecIVEndSystems 1 }
nwDecIVHostsInterfaces OBJECT IDENTIFIER ::= { nwDecIVEndSystems 2 }
nwDecIVHostsToMedia OBJECT IDENTIFIER ::= { nwDecIVEndSystems 3 }
-- DECnet Phase IV Router Access Control Group
-- DECnet Phase IV Router Event Log Group
nwDecIVEventLogConfig OBJECT IDENTIFIER ::= { nwDecIVEvent 1 }
nwDecIVEventLogFilterTable OBJECT IDENTIFIER ::= { nwDecIVEvent 2 }
nwDecIVEventLogTable OBJECT IDENTIFIER ::= { nwDecIVEvent 3 }
-- DECnet Phase IV Router Work-Group Group
DecIVAddress ::= OCTET STRING
-- MacAddress ::= OCTET STRING (SIZE (6))
-- DECnet Phase IV MIB Group
-- This group contains information about the revision level of this
-- MIB within the device. It allows verification of the released
-- version without having to read other objects.
nwDecIVMibRevText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the DECnet Phase
IV MIB in textual format."
::= { nwDecIVMibs 1 }
-- DECnet Phase IV Router System Group
-- This group contains the objects related to the DECnet Phase IV Router at a
-- global device-wide level.
-- DECnet Phase IV System Configuration Group
-- This group contains the objects that pertain to the setup and
-- configuration of the DECnet Phase IV routing services at a global,
-- device-wide level.
nwDecIVSysRouterId OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DECnet Address used to uniquely identify the host (device)
running DECnet Phase IV Routing Services. Since DECnet Phase IV
uses a single address to identify the host and all of its router
ports, rather than using an address per router port,
nwDecIVSysRouterID is the DECnet node address for all the router
ports on the device."
::= { nwDecIVSysConfig 1 }
nwDecIVNodeType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not configured
routing-iv(2), -- level 1 router
area(3) -- level 2 router
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the node type. Setting this value to 2, (routing-iv),
establishes the Routing Services-enabled device as a DECnet
Level 1, intra-area router. Setting this value to 2, establishes
the Routing Services-enabled device as a DECnet Phase IV Level 2,
or inter-area router."
DEFVAL { routing-iv }
::= { nwDecIVSysConfig 2 }
nwDecIVMaxNodes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of DECnet nodes allowed within an
area."
DEFVAL { 1023 }
::= { nwDecIVSysConfig 3 }
nwDecIVMaxBRA OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of router adjacencies supported by
this node."
DEFVAL { 16 }
::= { nwDecIVSysConfig 4 }
nwDecIVMaxBEA OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of endnode adjacencies supported
by this node."
DEFVAL { 64 }
::= { nwDecIVSysConfig 5 }
nwDecIVMaxHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of hops allowed for a valid route
within the area. Any intra-area route consisting of a greater
number of hops than specified by nwDecIVMaxHops is considered
unreachable."
DEFVAL { 30 }
::= { nwDecIVSysConfig 6 }
nwDecIVMaxCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum cost allowed for a valid route within the
area. Any intra-area route with a cost greater than nwDecIVMaxCost
is considered unreachable."
DEFVAL { 1022 }
::= { nwDecIVSysConfig 7 }
nwDecIVMaxVisits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of intra-area hops a packet can be
forwarded. A packet is dropped once it has been forwarded
nwDecIVMaxVisits."
DEFVAL { 63 }
::= { nwDecIVSysConfig 8 }
nwDecIVNonBroadcastTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the periodic interval (in seconds) at which DECnet
Routing Services advertises its route table, on any non-broadcast
networks attached to any router port configured and enabled for
DECnet Phase IV Routing Services."
DEFVAL { 1000 }
::= { nwDecIVSysConfig 9 }
nwDecIVBroadcastTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the periodic interval (in seconds) at which DECnet
Routing Services advertises its route table on any multi-access
broadcast networks attached to any router port configured and
enabled for DECnet Phase IV Routing Services."
DEFVAL { 1000 }
::= { nwDecIVSysConfig 10 }
nwDecIVAreas OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of areas allowed within a Level 2
(inter-area)routing domain."
DEFVAL { 63 }
::= { nwDecIVSysConfig 11 }
nwDecIVMaxAreaHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of areas that can be hopped by
a valid inter-area route. Any inter-area route requiring a
greater number of areas to be hopped than specified by
nwDecIVMaxAreaHops is considered invalid."
DEFVAL { 30 }
::= { nwDecIVSysConfig 12 }
nwDecIVMaxAreaCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum cost allowed for a valid Level 2
(inter-area) route. Any inter-area route with a cost greater than
nwDecIVMaxAreaCost is considered unreachable."
DEFVAL { 1022 }
::= { nwDecIVSysConfig 13 }
-- DECnet Phase IV System Administration Group
nwDecIVSysAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- shutdown DECnet routing services
enabled(3) -- startup DECnet routing services
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of DECnet Phase IV Routing Services,
system-wide. Enabled (3) causes DECnet Phase IV system-wide Routing
Services to become active on all router ports configured and enabled
for DECnet Phase IV Routing Services. Disabled (2) causes DECnet
Phase IV Routing Services to become inactive system-wide."
DEFVAL { enabled }
::= { nwDecIVSysAdministration 1 }
nwDecIVSysOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of DECnet Phase IV
Routing Services system-wide. The value of nwDecIVSysOperStatus
indicates any problem with your DECnet Phase IV Routing Services
configuration. A value of 6 indicates that regardless of the value
of nwDecIVSysAdminStatus, DECnet Phase IV Routing Services is not
operating because of an invalid configuration."
DEFVAL { enabled }
::= { nwDecIVSysAdministration 2 }
nwDecIVSysAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets DECnet Phase IV Routing Services, system-wide. Reset (2)
forces a restart of DECnet Phase IV Routing Services without a
graceful shutdown on any active router ports and without affecting
any other routing services."
DEFVAL { other }
::= { nwDecIVSysAdministration 3 }
nwDecIVSysOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVSysOperStatus has been in it's current state."
::= { nwDecIVSysAdministration 4 }
nwDecIVSysVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the DECnet Phase IV Routing
Services firmware, in textual format."
::= { nwDecIVSysAdministration 5 }
-- DECnet Phase IV Forwarding Group
-- This group contains the managed objects used to setup and configure
-- the DECnet Phase IV router network router ports for packet forwarding as well as
-- the aggregate and per-interface DECnet Phase IV packet forwarding counters.
-- DECnet Phase IV System-wide Packet Forwarding Counters
nwDecIVFwdCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- counters off
enabled(3) -- counters on
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the aggregate (system-wide)
DECnet packet and byte counters. Enabled (3) causes these counters
to become active. Disabled (2) causes these counters to become
inactive."
DEFVAL { enabled }
::= { nwDecIVFwdCounters 1 }
nwDecIVFwdCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the aggregate (system-wide) DECnet packet and byte counters.
Reset (2) resets the DECnet aggregate counters to 0.
nwDecIVFwdCtrOperationalTime is also reset to 0."
DEFVAL { other }
::= { nwDecIVFwdCounters 2 }
nwDecIVFwdCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
DecIVFwdCtrOperStatus has been in the current state."
::= { nwDecIVFwdCounters 3 }
nwDecIVFwdCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
received, system-wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 4 }
nwDecIVFwdCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
transmitted, system-wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 5 }
nwDecIVFwdCtrFwdPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
forwarded, system-wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 6 }
nwDecIVFwdCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
administratively filtered, system-wide, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 7 }
nwDecIVFwdCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded, system-wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 8 }
nwDecIVFwdCtrAddrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
because of addressing errors in the DECnet header."
::= { nwDecIVFwdCounters 9 }
nwDecIVFwdCtrLenErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
because an invalid packet length is contained in the DECnet header."
::= { nwDecIVFwdCounters 10 }
nwDecIVFwdCtrHdrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded, system-wide, during nwDecIVFwdCtrOperationalTime,
because of an invalid DECnet header."
::= { nwDecIVFwdCounters 11 }
nwDecIVFwdCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been received, system-wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 12 }
nwDecIVFwdCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been transmitted, system-wide, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 13 }
nwDecIVFwdCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets
that have been forwarded, system-wide, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 14 }
nwDecIVFwdCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been administratively filtered, system-wide, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 15 }
nwDecIVFwdCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been discarded, system wide, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 16 }
nwDecIVFwdCtrHostInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
successfully delivered to the local host, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 17 }
nwDecIVFwdCtrHostOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
transmitted by the local host, during nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 18 }
nwDecIVFwdCtrHostDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded by the local host, during nwDecIVFwdCtrOperationalTime,
due to a lack of host resources."
::= { nwDecIVFwdCounters 19 }
nwDecIVFwdCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been received by the local host, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 20 }
nwDecIVFwdCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been transmitted by the local host, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdCounters 21 }
nwDecIVFwdCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that have
been discarded by the local host, during
nwDecIVFwdCtrOperationalTime, due to a lack of host resources."
::= { nwDecIVFwdCounters 22 }
-- DECnet Phase IV Forwarding Interface Table
nwDecIVFwdIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port. This table is
indexed by nwDecIVFwdIfIndex, which indicates the value of MIB 2
ifIndex, which identifies the router port for which each entry exists."
::= { nwDecIVFwdIfConfig 1 }
nwDecIVFwdIfEntry OBJECT-TYPE
SYNTAX NwDecIVFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the DECnet Phase IV Routing Services
configuration for the router port for which the entry exists."
INDEX { nwDecIVFwdIfIndex }
::= { nwDecIVFwdIfTable 1 }
NwDecIVFwdIfEntry ::=
SEQUENCE {
nwDecIVFwdIfIndex INTEGER,
nwDecIVFwdIfAdminStatus INTEGER,
nwDecIVFwdIfOperStatus INTEGER,
nwDecIVFwdIfOperationalTime TimeTicks,
nwDecIVFwdIfControl INTEGER,
nwDecIVFwdIfMtu INTEGER,
nwDecIVFwdIfForwarding INTEGER,
nwDecIVFwdIfFrameType INTEGER,
nwDecIVFwdIfAclIdentifier INTEGER,
nwDecIVFwdIfAclStatus INTEGER,
nwDecIVFwdIfCacheControl INTEGER,
nwDecIVFwdIfCacheEntries Counter,
nwDecIVFwdIfCacheHits Counter,
nwDecIVFwdIfCacheMisses Counter
}
nwDecIVFwdIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists."
::= { nwDecIVFwdIfEntry 1 }
nwDecIVFwdIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of DECnet Phase IV Routing Services
on the router port for which the entry exists. Enabled (3) causes
DECnet Phase IV Routing Services to become active. Disabled (2)
causes it to become inactive."
DEFVAL { enabled }
::= { nwDecIVFwdIfEntry 2 }
nwDecIVFwdIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running,invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of DECnet Phase IV
Routing Services on the router port for which the entry exists.
The value of nwDecIVFwdIfOperStatus indicates any problem with the
configuration of DECnet Phase IV Routing Services on the router port.
value of 6 indicates that regardless of the value of
nwDecIVFwdIfAdminStatus, DECnet Phase IV Routing Services is not
operating because of an invalid port-level configuration."
::= { nwDecIVFwdIfEntry 3 }
nwDecIVFwdIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVFwdIfOperStatus has been in its current state."
::= { nwDecIVFwdIfEntry 4 }
nwDecIVFwdIfControl OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
add(2), -- add this entry
delete(3) -- delete this entry
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object,
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect."
DEFVAL { add }
::= { nwDecIVFwdIfEntry 5 }
nwDecIVFwdIfMtu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Maximum Transmission Unit (MTU) for DECnet packets on
the router port for which the entry exists. This includes the DECnet
header and data, but does not include framing."
DEFVAL { 1500 }
::= { nwDecIVFwdIfEntry 6 }
nwDecIVFwdIfForwarding OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not forwarding
enabled(3) -- forwarding
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the forwarding of DECnet packets on the router port for
which the entry exists. Enabled (3) causes DECnet packets to be
forwarded. Disabled (2) prevents DECnet packets from being forwarded."
DEFVAL { disabled }
::= { nwDecIVFwdIfEntry 7 }
nwDecIVFwdIfFrameType OBJECT-TYPE
SYNTAX INTEGER { -- valid media types
other(1), -- experimental
ethernet(2), -- ethernet
snap(3), -- ethernet, fddi, and token ring
nativewan(8), -- wan media types
encapenet(9), -- wan media types
encapenetsnap(11), -- wan media types
encaptrsnap(14), -- wan media types
encapfddisnap(16), -- wan media types
canonical(17) -- special media, tbd
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the framing type for DECnet packets forwarded on the router
port for which the entry exists. Some frame types are only valid for
specific media types. The comments reflect those valid media types."
DEFVAL { ethernet }
::= { nwDecIVFwdIfEntry 8 }
nwDecIVFwdIfAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Access Control ID of the access control list in
effect for DECnet packets being routed on the router port for which
the entry exists. A value of 0 indicates that no access control list
is in effect."
DEFVAL { 0 }
::= { nwDecIVFwdIfEntry 9 }
nwDecIVFwdIfAclStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- do not apply nwDecIVFwdIfAclIdentifier
enabled(3) -- apply nwDecIVFwdIfAclIdentifier
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of any access control list configured
for DECnet traffic on the router port for which the entry exists.
Enabled (3) applies the access control list indicated by the value
of nwDecIVFwdIfAclIdentifier to all DECnet traffic being routed on
the port. Disabled (2) prevents the access control list from being
applied."
DEFVAL { disabled }
::= { nwDecIVFwdIfEntry 10 }
nwDecIVFwdIfCacheControl OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the followin
disable(2), -- caching disabled
enable(3) -- caching enabled
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect."
DEFVAL { enable }
::= { nwDecIVFwdIfEntry 11 }
nwDecIVFwdIfCacheEntries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing
Services protocol-specific MIBs. Setting this object has no
effect."
::= { nwDecIVFwdIfEntry 12 }
nwDecIVFwdIfCacheHits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect."
::= { nwDecIVFwdIfEntry 13 }
nwDecIVFwdIfCacheMisses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect."
::= { nwDecIVFwdIfEntry 14 }
-- DECnet Phase IV Forwarding Interfaces Counter Table
nwDecIVFwdIfCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port configured and
enabled for DECnet Phase IV Routing Services."
::= { nwDecIVFwdIfCounters 1 }
nwDecIVFwdIfCtrEntry OBJECT-TYPE
SYNTAX NwDecIVFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry indicates the current packet and byte count of DECnet
packets on each router port for which the entry exists."
INDEX { nwDecIVFwdIfCtrIfIndex }
::= { nwDecIVFwdIfCtrTable 1 }
NwDecIVFwdIfCtrEntry ::=
SEQUENCE {
nwDecIVFwdIfCtrIfIndex INTEGER,
nwDecIVFwdIfCtrAdminStatus INTEGER,
nwDecIVFwdIfCtrReset INTEGER,
nwDecIVFwdIfCtrOperationalTime TimeTicks,
nwDecIVFwdIfCtrInPkts Counter,
nwDecIVFwdIfCtrOutPkts Counter,
nwDecIVFwdIfCtrFwdPkts Counter,
nwDecIVFwdIfCtrFilteredPkts Counter,
nwDecIVFwdIfCtrDiscardPkts Counter,
nwDecIVFwdIfCtrAddrErrPkts Counter,
nwDecIVFwdIfCtrLenErrPkts Counter,
nwDecIVFwdIfCtrHdrErrPkts Counter,
nwDecIVFwdIfCtrInBytes Counter,
nwDecIVFwdIfCtrOutBytes Counter,
nwDecIVFwdIfCtrFwdBytes Counter,
nwDecIVFwdIfCtrFilteredBytes Counter,
nwDecIVFwdIfCtrDiscardBytes Counter,
nwDecIVFwdIfCtrHostInPkts Counter,
nwDecIVFwdIfCtrHostOutPkts Counter,
nwDecIVFwdIfCtrHostDiscardPkts Counter,
nwDecIVFwdIfCtrHostInBytes Counter,
nwDecIVFwdIfCtrHostOutBytes Counter,
nwDecIVFwdIfCtrHostDiscardBytes Counter
}
nwDecIVFwdIfCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 1 }
nwDecIVFwdIfCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the per-port DECnet packet and
byte counters on the router port for which the entry exists. Enabled
(3) causes these counters to become active. Disabled (2) causes
these counters to become inactive."
DEFVAL { enabled }
::= { nwDecIVFwdIfCtrEntry 2 }
nwDecIVFwdIfCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the per-port DECnet packet and byte counters on the router
port for which the entry exists. Reset (2) resets the counters to 0.
nwDecIVFwdIfCtrOperationalTime is also reset to 0."
DEFVAL { other }
::= { nwDecIVFwdIfCtrEntry 3 }
nwDecIVFwdIfCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that the
per-port DECnet packet and byte counters have been active on the
router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 4 }
nwDecIVFwdIfCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
received, during nwDecIVFwdIfCtrOperationaltime, on the router port
for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 5 }
nwDecIVFwdIfCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 6 }
nwDecIVFwdIfCtrFwdPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
forwarded on the router port for which the entry exists, during
nwDecIVFwdCtrOperationalTime."
::= { nwDecIVFwdIfCtrEntry 7 }
nwDecIVFwdIfCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
administratively filtered, during nwDecIVFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 8 }
nwDecIVFwdIfCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded (dropped), during nwDecIVFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 9 }
nwDecIVFwdIfCtrAddrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded because of addressing errors in the DECnet header,
during nwDecIVFwdIfCtrOperationalTime, on the router port for
which the entry exists."
::= { nwDecIVFwdIfCtrEntry 10 }
nwDecIVFwdIfCtrLenErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded because an invalid packet length was contained in the
DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 11 }
nwDecIVFwdIfCtrHdrErrPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded because of an invalid DECnet header, during
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
entry exists."
::= { nwDecIVFwdIfCtrEntry 12 }
nwDecIVFwdIfCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been received, during nwDecIVFwdIfCtrOperationalTime, on the
router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 13 }
nwDecIVFwdIfCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that have
been transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 14 }
nwDecIVFwdIfCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been forwarded, during nwDecIVFwdIfCtrOperationalTime, on the
router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 15 }
nwDecIVFwdIfCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been administratively filtered, during
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
entry exists."
::= { nwDecIVFwdIfCtrEntry 16 }
nwDecIVFwdIfCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been discarded, during nwDecIVFwdIfCtrOperationalTime, on the
router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 17 }
nwDecIVFwdIfCtrHostInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
delivered to the local host, during nwDecIVFwdIfCtrOperationalTime,
that were received on the router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 18 }
nwDecIVFwdIfCtrHostOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
transmitted by the local host, during nwDecIVFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 19 }
nwDecIVFwdIfCtrHostDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet packets that have been
discarded by the local host, during nwDecIVFwdIfCtrOperationalTime,
that were received on the router port for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 20 }
nwDecIVFwdIfCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been delivered to the local host, during
nwDecIVFwdIfCtrOperationalTime, that were received on the router port
for which the entry exists."
::= { nwDecIVFwdIfCtrEntry 21 }
nwDecIVFwdIfCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been transmitted by the local host, during
nwDecIVFwdIfCtrOperationalTime, on the router port for which the
entry exists."
::= { nwDecIVFwdIfCtrEntry 22 }
nwDecIVFwdIfCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that
have been discarded by the local host, due to a lack of host
resources, that were received on the router port for which the entry
exists, during nwDecIVFwdIfCtrOperationalTime."
::= { nwDecIVFwdIfCtrEntry 23 }
-- DistanceVector-based Protocols
-- This group contains the managed objects for DEC IV Routing Protocol, DEC IV
-- DistanceVector based routing.
-- DEC IV Proto System Configuration Parameters
-- This group contains the objects that pertain to the setup and
-- configuration of the DEC IV Proto DistanceVector based routing protocol.
nwDecIVProtoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- shutdown the router
enabled(3) -- startup the router
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the DECnet Phase IV
distance-vector-based routing protocol system-wide. Enabled (3)
causes the routing protocol to become active on all router ports
configured and enabled for DECnet Routing Services. Disabled (2)
causes the routing protocol to become inactive."
DEFVAL { enabled }
::= { nwDecIVProtoConfig 1 }
nwDecIVProtoOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6) -- not running-invalid config
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the DECnet Phase
IV distance-vector-based routing protocol system-wide. The value
of nwDecIVProtoOperStatus indicates any problem with the DECnet
Phase IV distance-vector-based routing protocol configuration.
A value of 6 indicates that regardless of the value of
nwDecIVProtoAdminStatus, the DECnet Phase IV distance-vector-based
routing protocol is not operating because of an invalid configuration."
::= { nwDecIVProtoConfig 2 }
nwDecIVProtoAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the DECnet Phase IV distance-vector-based routing
protocol. Reset (2) forces a system-wide restart of the protocol
without a graceful shut-down on any active router ports."
DEFVAL { other }
::= { nwDecIVProtoConfig 3 }
nwDecIVProtoOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVProtoOperStatus has been in current state."
::= { nwDecIVProtoConfig 4 }
nwDecIVProtoVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the DECnet Phase IV
distance-vector-based routing protocol firmware, in textual format."
::= { nwDecIVProtoConfig 5 }
nwDecIVProtoStackSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the stack size of the DECnet Phase IV distance-vector-
based routing protocol thread. In order for a change of this value
to take effect, the protocol (nwDecIVProtoAdminReset), DECnet
Phase IV Routing Services (nwDecIVSysAdminReset), or the device
running Routing Services must be reset."
DEFVAL { 4096 }
::= { nwDecIVProtoConfig 6 }
nwDecIVProtoThreadPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the run-time execution priority of the DECnet Phase IV
distance-vector-based routing protocol thread. In order for a change
of this value to take effect, the protocol (nwDecIVProtoAdminReset),
DECnet Phase IV Routing Services (nwDecIVSysAdminReset), or the
device running Routing Services must be reset."
DEFVAL { 127 }
::= { nwDecIVProtoConfig 7 }
nwDecIVProtoDatabaseThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect."
DEFVAL { 2000 }
::= { nwDecIVProtoConfig 8 }
nwDecIVProtoAgeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect."
DEFVAL { 180 }
::= { nwDecIVProtoConfig 9 }
nwDecIVProtoHoldDown OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific
MIBs. Setting this object has no effect. "
DEFVAL { 120 }
::= { nwDecIVProtoConfig 10 }
-- DEC IV Routing Protocol System (aggregate) Counters
-- This group contains the aggregate (device-wide) DEC IV Routing Protocol
-- packet and byte counters.
nwDecIVProtoCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- counters off
enabled(3) -- counters on
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the aggregate (system-wide) DECnet
Phase IV distance-vector-based routing protocol packet and byte
counters. Enabled (3) causes these counters to become active.
Disabled (2) causes these counters to become inactive."
DEFVAL { enabled }
::= { nwDecIVProtoCounters 1 }
nwDecIVProtoCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the aggregate (system-wide) DECnet Phase IV
distance-vector-based routing protocol packet and byte counters.
Reset (2) resets the DECnet aggregate counters to 0.
nwDecIVProtoCtrOperationalTime is also reset to 0."
DEFVAL { other }
::= { nwDecIVProtoCounters 2 }
nwDecIVProtoCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVProtoCtrAdminStatus has been in it's current state."
::= { nwDecIVProtoCounters 3 }
nwDecIVProtoCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been received, system-wide,
during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 4 }
nwDecIVProtoCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been transmitted, system-wide,
during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 5 }
nwDecIVProtoCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been administratively filtered,
system-wide, during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 6 }
nwDecIVProtoCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of the DECnet Phase IV distance-vector
-based routing protocol packets that have been discarded,
system-wide, during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 7 }
nwDecIVProtoCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vector based routing protocol packets that have been
received, system-wide, during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 8 }
nwDecIVProtoCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vectorbased routing protocol packets that have been
transmitted, system-wide, during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 9 }
nwDecIVProtoCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vectorbased routing protocol packets that have been
administratively filtered, system-wide, during
nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 10 }
nwDecIVProtoCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vectorbased routing protocol packets that have been
discarded system-wide, during nwDecIVProtoCtrOperationalTime."
::= { nwDecIVProtoCounters 11 }
-- DecIV Protocol Interface Table
nwDecIVProtoIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVProtoIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port. Each entry can
contain different values, allowing the routing protocol configuration
to vary from router port to router port. This table is indexed by
nwDecIVProtoIfIndex, which indicates the value of MIB 2 ifIndex,
which identifies the router port for which each entry exists."
::= { nwDecIVProtoIfConfig 1 }
nwDecIVProtoIfEntry OBJECT-TYPE
SYNTAX NwDecIVProtoIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the DECnet Phase IV distance-vector-based
routing protocol configuration for the router port for which the
entry exists."
INDEX { nwDecIVProtoIfIndex }
::= { nwDecIVProtoIfTable 1 }
NwDecIVProtoIfEntry ::=
SEQUENCE {
nwDecIVProtoIfIndex INTEGER,
nwDecIVProtoIfAdminStatus INTEGER,
nwDecIVProtoIfOperStatus INTEGER,
nwDecIVProtoIfOperationalTime TimeTicks,
nwDecIVProtoIfVersion INTEGER,
nwDecIVProtoIfAdvertisement INTEGER,
nwDecIVProtoIfFloodDelay INTEGER,
nwDecIVProtoIfRequestDelay INTEGER,
nwDecIVProtoIfPriority INTEGER,
nwDecIVProtoIfHelloTimer INTEGER,
nwDecIVProtoIfSplitHorizon INTEGER,
nwDecIVProtoIfPoisonReverse INTEGER,
nwDecIVProtoIfSnooping INTEGER,
nwDecIVProtoIfType INTEGER,
nwDecIVProtoIfXmitCost INTEGER,
nwDecIVProtoIfAclIdentifier INTEGER,
nwDecIVProtoIfAclStatus INTEGER
}
nwDecIVProtoIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists."
::= { nwDecIVProtoIfEntry 1 }
nwDecIVProtoIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the DECnet Phase IV
distance-vector-based routing protocol on the router port for which
the entry exists. Enabled (3) causes the routing protocol to become
active on the router port. Disabled (2) causes it to become inactive."
DEFVAL { enabled }
::= { nwDecIVProtoIfEntry 2 }
nwDecIVProtoIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5) -- start-up in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the DECnet Phase IV
distance-vector-based routing protocol on the router port for which
the entry exists. The value of nwDecIVProtoIfOperStatus indicates
any problem with your routing protocol configuration on the router
port. A value of 6 indicates that regardless of the value of
nwDecIVProtoIfAdminStatus, the routing protocol is not operating
because of an invalid configuration."
::= { nwDecIVProtoIfEntry 3 }
nwDecIVProtoIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVProtoIfOperStatus has been in it`s current state."
::= { nwDecIVProtoIfEntry 4 }
nwDecIVProtoIfVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the revision level of the DECnet Phase IV
distance-vector-based routing protocol firmware on the router port
for which the entry exists, in textual format."
DEFVAL { 3 }
::= { nwDecIVProtoIfEntry 5 }
nwDecIVProtoIfAdvertisement OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the interval, in seconds, at which the DECnet Phase IV
distance-vectorbased routing protocol advertises its route table on
the router port for which the entry exists. Change this value to
cause the DECnet Phase IV distance-vector-based routing protocol to
advertise its route table more or less frequently on the router port."
DEFVAL { 40 }
::= { nwDecIVProtoIfEntry 6 }
nwDecIVProtoIfFloodDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect."
DEFVAL { 2 }
::= { nwDecIVProtoIfEntry 7 }
nwDecIVProtoIfRequestDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect."
DEFVAL { 0 }
::= { nwDecIVProtoIfEntry 8 }
nwDecIVProtoIfPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the priority of the DECnet Phase IV distance-vector-based
routing protocol on the router port for which the entry exists.
Within an area, the router with the highest value for
nwDecIVProtoIfPriority becomes the priority or designated router.
The highest possible value for nwDecIVProtocolIfPriority is 127. Set
this value high to cause your DECnet Phase IV Routing Services-enabled
device to become the designated router. Set this value low to guarantee
that it does not become the designated router."
DEFVAL { 64 }
::= { nwDecIVProtoIfEntry 9 }
nwDecIVProtoIfHelloTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the interval, in seconds, at which DECnet Phase IV
distance-vector-based routing protocol sends Hello packets on the
router port for which the entry exists."
DEFVAL { 15 }
::= { nwDecIVProtoIfEntry 10 }
nwDecIVProtoIfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- Split Horizon off
enabled(3) -- Split Horizon on
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect."
DEFVAL { enabled }
::= { nwDecIVProtoIfEntry 11 }
nwDecIVProtoIfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common object
inherited from the MIB framework used to provide a common management
interface to all the Cabletron Routing Services protocol-specific MIBs.
Setting this object has no effect."
DEFVAL { disabled }
::= { nwDecIVProtoIfEntry 12 }
nwDecIVProtoIfSnooping OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- Snooping off
enabled(3) -- Snooping on
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of DECnet Phase IV distance-vector-based
routing protocol snooping on the router port. When snooping is
enabled the DECnet Phase IV distance-vector-based routing protocol
operates in passive mode, so that it receives route information,
builds and maintains a route table, but does not advertise the route
table or send updates on the router port for which the entry exists."
DEFVAL { disabled }
::= { nwDecIVProtoIfEntry 13 }
nwDecIVProtoIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
bma(2), -- broadcast media access
nbma(3) -- non-broadcast media access
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the directly connected network segment does or
does not support broadcast media access."
DEFVAL { bma }
::= { nwDecIVProtoIfEntry 14 }
nwDecIVProtoIfXmitCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the cost of transmitting a packet on the network segment
connected to the router port for which the entry exists. The DECnet
Phase IV distance-vector-based routing protocol picks the route with
the least total nwDecIVProtoIfXmitCost as the best route. If
nwDecIVProtocolIfXmitCost, also known as path cost, is the same for
all possible routes , the best route chosen is the route with the
least number of hops is chosen as the best route."
DEFVAL { 1 }
::= { nwDecIVProtoIfEntry 15 }
nwDecIVProtoIfAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Access Control ID of the access control list in
effect for DECnet Phase IV distance-vector-based routing protocol
packets on the router port for which the entry exists. A value of 0
indicates that there is no access control list in effect for DECnet
Phase IV distance-vector-based routing protocol packets on the router
port."
DEFVAL { 0 }
::= { nwDecIVProtoIfEntry 16 }
nwDecIVProtoIfAclStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- do not apply nwDecIVProtoIfAcl
enabled(3) -- apply nwDecIVProtoIfAcl
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the operation of the access control list identified by
nwDecIVProtoIfAclIdentifier. Enabled (3) applies the access control
list to all DECnet Phase IV distance-vector-based routing protocol
packet traffic on the router port for which the entry exists. Disabled
(2) prevents the access control list from being applied."
DEFVAL { disabled }
::= { nwDecIVProtoIfEntry 17 }
-- Dec IV Protocol Interface Counters Table
-- This table contains the managed objects for DEC IV protocols packet and
-- byte counter on a per router port basis.
nwDecIVProtoIfCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVProtoIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port. This table is
indexed by nwDecIVProtoIfCtrIfIndex which indicates the value of
MIB2 ifindex, which identifies the router port for which the entry
exists."
::= { nwDecIVProtoIfCounters 1 }
nwDecIVProtoIfCtrEntry OBJECT-TYPE
SYNTAX NwDecIVProtoIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry indicates the current packet and byte count of DECnet
Phase IV distance-vector-based routing protocol packets on the router
port for which the entry exists."
INDEX { nwDecIVProtoIfCtrIfIndex }
::= { nwDecIVProtoIfCtrTable 1 }
NwDecIVProtoIfCtrEntry ::=
SEQUENCE {
nwDecIVProtoIfCtrIfIndex INTEGER,
nwDecIVProtoIfCtrAdminStatus INTEGER,
nwDecIVProtoIfCtrReset INTEGER,
nwDecIVProtoIfCtrOperationalTime TimeTicks,
nwDecIVProtoIfCtrInPkts Counter,
nwDecIVProtoIfCtrOutPkts Counter,
nwDecIVProtoIfCtrFilteredPkts Counter,
nwDecIVProtoIfCtrDiscardPkts Counter,
nwDecIVProtoIfCtrInBytes Counter,
nwDecIVProtoIfCtrOutBytes Counter,
nwDecIVProtoIfCtrFilteredBytes Counter,
nwDecIVProtoIfCtrDiscardBytes Counter
}
nwDecIVProtoIfCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port for which the entry exists."
::= { nwDecIVProtoIfCtrEntry 1 }
nwDecIVProtoIfCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the per-port DECnet Phase IV
distance-vectorbased routing protocol packet and byte counters on
the router port for which the entry exists. Enabled (3) causes these
counters to become active. Disabled (2) causes these counters to
become inactive."
DEFVAL { enabled }
::= { nwDecIVProtoIfCtrEntry 2 }
nwDecIVProtoIfCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the per-port DECnet Phase IV distance-vector-based routing
protocol packet and byte counters on the router port for which the
entry exists. Reset (2) resets the counters to 0.
nwDecIVProtoIfCtrOperationalTime is also reset to 0."
DEFVAL { other }
::= { nwDecIVProtoIfCtrEntry 3 }
nwDecIVProtoIfCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwDecIVProtoIfCtrAdminStatus has been in the current state."
::= { nwDecIVProtoIfCtrEntry 4 }
nwDecIVProtoIfCtrInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been received, during
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
entry exists."
::= { nwDecIVProtoIfCtrEntry 5 }
nwDecIVProtoIfCtrOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been transmitted, during
nwDecIVProtoIfCtrOperationalTime, on the router port for which the
entry exists."
::= { nwDecIVProtoIfCtrEntry 6 }
nwDecIVProtoIfCtrFilteredPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been administratively filtered,
during nwDecIVProtoIfCtrOperationalTime, on the router port for which
the entry exists."
::= { nwDecIVProtoIfCtrEntry 7 }
nwDecIVProtoIfCtrDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of DECnet Phase IV distance-vector-based
routing protocol packets that have been discarded, during
nwDecIVProtoIfCtrOperationalTime, that were received on the router
port for which the entry exist."
::= { nwDecIVProtoIfCtrEntry 8 }
nwDecIVProtoIfCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vector-based routing protocol packets that have been
received, during nwDecIVProtoIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwDecIVProtoIfCtrEntry 9 }
nwDecIVProtoIfCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vector-based routing protocol packets that have been
transmitted, during nwDecIVProtoIfCtrOperationalTime, on the router
port for which the entry exists."
::= { nwDecIVProtoIfCtrEntry 10 }
nwDecIVProtoIfCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet Phase IV
distance-vector-based routing protocol packets that have been
administratively filtered, during nwDecIVProtoIfCtrOperationalTime,
that were received on the router port for which the entry exists."
::= { nwDecIVProtoIfCtrEntry 11 }
nwDecIVProtoIfCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the DECnet packets that have
been discarded, during nwDecIVProtoIfCtrOperationalTime, that were
received on the router port for which the entry exists."
::= { nwDecIVProtoIfCtrEntry 12 }
-- DECnet Phase IV Forward Information Base (FIB) Table
-- This table contains the managed objects for the forwarding table of the
-- DECnet Phase IV router. This table is built from entries in the DECnet
-- Phase IV routing table(s) and reflects the routes that are considered
-- the best routes to forward on.
nwDecIVFibTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVFibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each route being used to forward
DECnet data packets.."
::= { nwDecIVFib 1 }
nwDecIVFibEntry OBJECT-TYPE
SYNTAX NwDecIVFibEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in the table describes a route to a particular DECnet
destination network and node."
INDEX { nwDecIVFibNodeId }
::= { nwDecIVFibTable 1 }
NwDecIVFibEntry ::=
SEQUENCE {
nwDecIVFibNodeId DecIVAddress,
nwDecIVFibNextHopNodeId DecIVAddress,
nwDecIVFibNextHopIf INTEGER,
nwDecIVFibRouteType INTEGER
}
nwDecIVFibNodeId OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the DECnet Address of the destination node of the route
for which the entry exists."
::= { nwDecIVFibEntry 1 }
nwDecIVFibNextHopNodeId OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Contains the DECnet Address of the next hop router for the route
for which the entry exists."
::= { nwDecIVFibEntry 2 }
nwDecIVFibNextHopIf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the router
port through which the route exists."
DEFVAL { 0 }
::= { nwDecIVFibEntry 3 }
nwDecIVFibRouteType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
invalid(2), -- not a valid route
direct(3), -- destination is on a direct conn. seg.
remote(4) -- destination is avail. through the next hop router.
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the status of the route. A value of 3 indicates that the
destination is on the network segment that is directly connected to
the router port identified by nwDecIVFibNextHopIf. A value of 4
indicates that the destination is on an indirectly connected network
segment, which is reachable through the next hop router indicated by
the value of nwDecIVFibNextHopNodeId. A value of 2 indicates that the
route is invalid."
DEFVAL { direct }
::= { nwDecIVFibEntry 4 }
-- DECnet Phase IV Access Control List Table
-- This table contains the managed objects for the Access Control Lists
-- within the DECnet Phase IV Router. Access Control Lists allow configuration of
-- restricted access to networks and protocols reachable thru the DecIV
-- Router device. Access Control Lists can be defined with these
nwDecIVAclValidEntries OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of valid entries that exist in the access
control list table, nwDecIVAclTable."
::= { nwDecIVAccessControl 1 }
nwDecIVAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the access control list information for DECnet
traffic. This table contains entries each of which specifies whether
packet forwarding between a particular source destination pair is
permitted or denied. Each entry is part of a particular access
control list. Each list is identified by a unique Access Control ID.
Each list may contain multiple entries ordered by sequence number.
When an Access Control List is searched, it is searched in sequence
number order and the first match found ends the search. If no match
is found, access defaults to permitted."
::= { nwDecIVAccessControl 2 }
nwDecIVAclEntry OBJECT-TYPE
SYNTAX NwDecIVAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains DECnet source/destination access information."
INDEX { nwDecIVAclIdentifier, nwDecIVAclSequence }
::= { nwDecIVAclTable 1 }
NwDecIVAclEntry ::=
SEQUENCE {
nwDecIVAclIdentifier INTEGER,
nwDecIVAclSequence INTEGER,
nwDecIVAclPermission INTEGER,
nwDecIVAclMatches Counter,
nwDecIVAclDestAddress DecIVAddress,
nwDecIVAclSrcAddress DecIVAddress
}
nwDecIVAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the primary (major) index into the DECnet access control
list table. This value identifies each access control list by a
unique identifier, a number arbitrarily assigned by the user. All
entries that have the same value for nwDecIVAclIdentifier belong to
the same access control list."
::= { nwDecIVAclEntry 1 }
nwDecIVAclSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the secondary (minor) index into the DECnet access control
list table. This number corresponds to a sequence number used to
order multiple entries within the same access control list."
::= { nwDecIVAclEntry 2 }
nwDecIVAclPermission OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
permit(3),
deny(4),
permit-bidirectional(5),
deny-bidirectional(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether access is allowed or denied between the source
and destination address pair. Note that source and destination are
interchangeable when bi-directional control is selected. To remove
an existing entry set nwDecIVAclPermission to invalid (2). Invalid
entries disappear after reboot."
DEFVAL { permit }
::= { nwDecIVAclEntry 3 }
nwDecIVAclMatches OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of matches on this entry that have resulted
in the permit/deny access restriction being applied as part of the
forwarding process."
::= { nwDecIVAclEntry 4 }
nwDecIVAclDestAddress OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the destination DECnet Address used to compare for
matches on the access control list. Either the Area ID or Node ID
of this address may be set to 0, a wildcard value which matches all
areas or all nodes."
::= { nwDecIVAclEntry 5 }
nwDecIVAclSrcAddress OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the source DECnet Address used to compare for matches on
the access control list. Either the Area ID or Node ID of this
address may be set to a wildcard value which matches all areas or
all nodes."
::= { nwDecIVAclEntry 6 }
--
-- DecIV Hosts-to-Media Table
-- This table provides a mapping between DecIV Network Protocol
-- addresses and their corresponding circuit identifiers (if
-- applicable), port numbers, and framing.
nwDecIVHostMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVHostMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The DecIV Address translation table used for mapping
a DecIV address to a circuit identifier (if applicable),
corresponding port number, and framing type."
::= { nwDecIVHostsToMedia 1 }
nwDecIVHostMapEntry OBJECT-TYPE
SYNTAX NwDecIVHostMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains one DecIVAddress to circuit
equivalence. Also provided is the framing required to
converse with this host, and the corresponding logical
port number."
INDEX { nwDecIVHostMapIfIndex, nwDecIVHostMapDecIVAddr }
::= { nwDecIVHostMapTable 1 }
NwDecIVHostMapEntry ::=
SEQUENCE {
nwDecIVHostMapIfIndex INTEGER,
nwDecIVHostMapDecIVAddr DecIVAddress,
nwDecIVHostMapType INTEGER,
nwDecIVHostMapCircuitID INTEGER,
nwDecIVHostMapFraming INTEGER,
nwDecIVHostMapPortNumber INTEGER
}
nwDecIVHostMapIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the primary (major) index into the DecIV HostMap
table. This number corresponds to the index into the MIB-2
Interfaces Group which describes the DecIV router port for which
the entry exists."
::= { nwDecIVHostMapEntry 1 }
nwDecIVHostMapDecIVAddr OBJECT-TYPE
SYNTAX DecIVAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The DecIVAddress of the host on the corresponding interface
and circuit (if applicable)."
::= { nwDecIVHostMapEntry 2 }
nwDecIVHostMapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
dynamic(3),
static(4),
inactive(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry in the
nwDecIVHostMapTable. That is, it effectively dissasociates
the circuitand/or interface identified with said entry from the
mapping identified with said entry. It is an implementation-
specific matter as to whether the agent removes an invalidated
entry from the table. Accordingly, management stations must be
prepared to receive tabular information from agents that
corresponds to entries not currently in use. Proper inter-
pretation of such entries requires examination of the relevant
wDecIVHostMapType object."
::= { nwDecIVHostMapEntry 3 }
nwDecIVHostMapCircuitID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The identifier for the virtual circuit present on the
interface. On an interface configured for Frame Relay,
this number is the DLCI for the DecIV Address at the end of
the circuit. For non-WAN interfaces, the value of this
object is zero."
::= { nwDecIVHostMapEntry 4 }
nwDecIVHostMapFraming OBJECT-TYPE
SYNTAX INTEGER { -- valid media types
other(1), -- experimental
ethernet(2), -- ethernet
snap(3), -- ethernet, fddi, and token ring
nativewan(8), -- wan media types
encapenet(9), -- wan media types
encapenetsnap(11), -- wan media types
encaptrsnap(14), -- wan media types
encapfddisnap(16), -- wan media types
canonical(17) -- special media, tbd
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the framing type required to converse with the
host for which this entry exists."
::= { nwDecIVHostMapEntry 5 }
nwDecIVHostMapPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value for the logical port number. It's value
ranges between 1 and a maximum value which is dependent on both
the number of configured interfaces in the system and the number
of circuits present on those interfaces which are of WAN type."
::= { nwDecIVHostMapEntry 6 }
-- DECnet Event Group
nwDecIVEventAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1) ,
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of DECnet event logging. Enabled (3)
causes the event log to become active. Disabled (2) causes the event
log to become inactive."
DEFVAL { disabled }
::= { nwDecIVEventLogConfig 1 }
nwDecIVEventMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the maximum number of entries allowed in the event log table.
When the number of entries reaches the value of nwDecIVEventMaxEntries,
the first (oldest) entry is deleted to allow a new entry to be added."
DEFVAL { 100 }
::= { nwDecIVEventLogConfig 2 }
nwDecIVEventTraceAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled (3) allows logging of all event types on all router ports
for all protocols and components. Disabled (2) causes the filter
table to specify which events to log."
DEFVAL { enabled }
::= { nwDecIVEventLogConfig 3 }
-- Event Log Filter Table
-- The Event Log Filter Table contains the managed objects used to set-up
-- and configure log entries.
nwDecIVEventFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains and entry for each event filter configured for
DECnet Phase IV Routing Services events."
::= { nwDecIVEventLogFilterTable 1 }
nwDecIVEventFilterEntry OBJECT-TYPE
SYNTAX NwDecIVEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry describes an event filter which defines a particular type
of event to be logged to the event log. The value of
nwDecIVEventFltrProtocol indicates the value used either in the
nwRtgProtocolTable or the nwComponentTable in the Cabletron Routing
Services MIB, which identifies the protocol or component to which the
entry applies."
INDEX { nwDecIVEventFltrProtocol, nwDecIVEventFltrIfNum }
::= { nwDecIVEventFilterTable 1 }
NwDecIVEventFilterEntry ::=
SEQUENCE {
nwDecIVEventFltrProtocol INTEGER,
nwDecIVEventFltrIfNum INTEGER,
nwDecIVEventFltrControl INTEGER,
nwDecIVEventFltrType INTEGER,
nwDecIVEventFltrSeverity INTEGER,
nwDecIVEventFltrAction INTEGER
}
nwDecIVEventFltrProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of the Cabletron Routing Services MIB
nwRtgProtocolInstance or nwComponentRtgInstance which identifies the
protocol involved in the event for which the event filter exists."
::= { nwDecIVEventFilterEntry 1 }
nwDecIVEventFltrIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the router port involved in the event for which the event
filter exists."
::= { nwDecIVEventFilterEntry 2 }
nwDecIVEventFltrControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2),
add(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this value to 3 to add the entry to the event filter table. Set
this value to 2 to remove the entry from the event filter table."
DEFVAL { add }
::= { nwDecIVEventFilterEntry 3 }
nwDecIVEventFltrType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
diags(32),
error(64)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This 6 bit mask specifies the types of events to be logged. By
default all 6 bits are set to 1, indicating that all types of events
are to be logged. Setting any bit to 0 removes an event type from
this field and prevents that type of event from being logged. Setting
any bit to 1 adds an event type to this field and enables that type
of event to be logged."
::= { nwDecIVEventFilterEntry 4 }
nwDecIVEventFltrSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the level of severity an event must meet in order to be
logged. Controls the amount of event logging by ignoring events of a
lower priority than specified by this filter value. `Highmed' ignores
only events of the lowest severity. `Highlow' logs all events highest
priority through lowest. `Highest' severity causes all events except
those of the highest severity to be ignored. `Highmed' severity is the
default setting which causes only events of the lowest severity to be
ignored. `Highlow' severity logs all events, regardless of severity."
DEFVAL { highest }
::= { nwDecIVEventFilterEntry 5 }
nwDecIVEventFltrAction OBJECT-TYPE
SYNTAX INTEGER {
log(1),
trap(2),
log-trap(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies how the events are to be logged. Logging to the `log'
stores the events in the event log table (nwDecIVEventLogTable).
Logging to'trap' sends events out through the trap mechanism."
DEFVAL { log }
::= { nwDecIVEventFilterEntry 6 }
-- Event Log Table
-- The Event Log Table contains the logged events.
nwDecIVEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwDecIVEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each event that has been
logged."
::= { nwDecIVEventLogTable 1 }
nwDecIVEventEntry OBJECT-TYPE
SYNTAX NwDecIVEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains the information about an event that has
been logged to the event table."
INDEX { nwDecIVEventNumber }
::= { nwDecIVEventTable 1 }
NwDecIVEventEntry ::=
SEQUENCE {
nwDecIVEventNumber INTEGER,
nwDecIVEventTime TimeTicks,
nwDecIVEventType INTEGER,
nwDecIVEventSeverity INTEGER,
nwDecIVEventProtocol INTEGER,
nwDecIVEventIfNum INTEGER,
nwDecIVEventTextString OCTET STRING
}
nwDecIVEventNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An ordinal value assigned to the event for which the log entry
exists. nwDecIVEventNumber is assigned so that each event in the
event log can be uniquely identified by the value of
nwDecIVEventNumber."
::= { nwDecIVEventEntry 1 }
nwDecIVEventTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time at which the event was logged to the event
log."
::= { nwDecIVEventEntry 2 }
nwDecIVEventType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of event that was logged."
::= { nwDecIVEventEntry 3 }
nwDecIVEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the severity that was assigned to the event."
::= { nwDecIVEventEntry 4 }
nwDecIVEventProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of the Cabletron Routing Services MIB
nwRtgProtocolInstance or nwComponentInstance which identifies the
protocol or component that was involved in the event."
::= { nwDecIVEventEntry 5 }
nwDecIVEventIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the router port that was involved in the event."
::= { nwDecIVEventEntry 6 }
nwDecIVEventTextString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains the actual text string that was logged."
::= { nwDecIVEventEntry 7 }
END
Reference in New Issue Copy Permalink