mibs/MIBS/enterasys/CTRON-UPS-MIB

209 lines
7.4 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
CTRON-UPS-MIB DEFINITIONS ::= BEGIN
-- ctron-ups-mib.txt
-- Revision: 1.03.00
-- Part Number: 2170564
-- Date: May 1, 1996
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise-specific UPS MIB.
--
-- This module will be extended, as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright October 95 Cabletron Systems
-- This MIB is implemented whenever a uninterruptable power
-- supply is implemented.
IMPORTS
ctUPowerSupply FROM CTRON-MIB-NAMES
OBJECT-TYPE FROM RFC-1212;
ctUPS OBJECT IDENTIFIER ::= { ctUPowerSupply 1 }
-- The ups group
-- Implementation of this group is mandatory for devices that
-- incorporate uninterruptible power supplies.
ctUpsID OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
aPCModel370(257),
aPCModel400(258),
aPCModel600(259),
aPCModel900(260),
aPCModel1250(261),
aPCModel2000(262),
matrix3000(263),
matrix5000(264),
su700(265),
su1400(266),
su2000XL(267),
aPCGeneric(268) -- Generic APC for use when APC is not
-- otherwise defined.
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Denotes a type code which refers to the
manufacturers and model of the UPS."
::= { ctUPS 1 }
ctUpsUpTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Denotes the operating time, in hours, since the UPS
was last powered on."
::= { ctUPS 2 }
ctUpsDisable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Allows the UPS to be disabled. A set turns of the
UPS for those systems, so equipped. A get/get-next
always returns 0."
::= { ctUPS 3 }
ctUpsDisconnect OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allows the UPS backup power system to conserve its
battery. A set turns off the power system. A
get/get-next always returns a 0."
::= { ctUPS 4 }
ctUpsTest OBJECT-TYPE
SYNTAX INTEGER {
unitOK(1),
unitFailed(2),
badBattery(3),
noRecentTest(4), -- no test performed in the last five
-- minutes
underTest(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Denotes the status performed on the UPS. A write
initiates the test. A read indicates status of
test."
::= { ctUPS 5 }
ctUpsBatteryCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the percentage of battery capacity left,
100% being a fully-charged battery."
::= { ctUPS 6 }
ctUpsACLineVoltsIn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the input AC utility line voltage."
::= { ctUPS 7 }
ctUpsBatteryVoltsOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the battery voltage."
::= { ctUPS 8 }
-- Enterprise specific trap definitions
-- aPCLineFail OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated in the event of an AC
-- utility line failure."
-- ::= 0x1101
--
-- aPCLineFailRecovery OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated when the UPS switches back
-- to line, and only if the aPCLineFail trap was issued
-- first."
-- ::= 0x1102
--
-- aPCLowBattery OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated in the event that the UPS'
-- battery is found to be low."
-- ::= 0x1103
--
-- aPCLowBatteryRecovery OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated when the UPS' battery has
-- charged above the low-battery point, and only if the
-- aPCLowBattery trap was issued first."
-- ::= 0x1104
--
-- aPCAbnormalCondition OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated in the event that the UPS
-- has entered an abnormal condition, such as an
-- overload or trip on low battery. This trap is also
-- sent, when the UPS is first turned on."
-- ::= 0x1105
--
-- aPCAbnormalConditionRecovery OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated when the UPS has recovered
-- from an abnormal condition, and only if the
-- aPCAb-normalCondition trap was issued first."
-- ::= 0x1106
--
-- aPCShuttingDown OBJECT-TYPE
-- ENTERPRISE cabletron
-- DESCRIPTION
-- "This trap is generated in the event that the UPS
-- has been ordered to shut itself, or the load, off
-- over the serial line."
-- ::= 0x1107
--
--
END