mibs/MIBS/hp/HP-SN-APPLETALK-MIB

HP-SN-APPLETALK-MIB DEFINITIONS ::= BEGIN


-- Foundry snAppleTalk Group MIB Release 1.0.0
-- Revision 0 1/19/98

-- Copyright 1996-98 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base 
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.

-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- SECTION 1: Top Level Definitions


-- Imports

IMPORTS
	Counter
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	ClearStatus, RowSts, PortIndex
		FROM HP-SN-IP-MIB
	snAppleTalk
		FROM HP-SN-ROOT-MIB;


    ATNetworkNumber ::=         -- 2 octets of net number
                                -- in network byte order
        OCTET STRING (SIZE (2))

    DdpNodeAddress ::=          -- 2 octets of net number
                                -- in network byte order,
                                -- 1 octet of node number
        OCTET STRING (SIZE (3))

    ATName ::=                  -- 0 to 32 octets of AppleTalk
                                -- ASCII [Inside AppleTalk]
        OCTET STRING (SIZE (0..32))

	--  RtrStatus Values

	     RtrStatus ::= INTEGER { disabled(0), enabled (1) }

	--  Action 

		Action ::= INTEGER { deny(0), permit(1) }

-- SECTION 2: MIB 

-- Router AppleTalk MIB
-- This section contains AppleTalk specific router MIB object definitions.

-- AppleTalk general group

snRtATGeneral               OBJECT IDENTIFIER ::= { snAppleTalk 1 }

snRtATRoutingEnable            OBJECT-TYPE
	SYNTAX  RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/disable AppleTalk routing function on this box."
	::= { snRtATGeneral 1 }

snRtATClearArpCache            OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear AppleTalk arp cache table."
	::= { snRtATGeneral 2 }

snRtATClearFwdCache            OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear AppleTalk forward cache table."
	::= { snRtATGeneral 3 }

snRtATClearRoute               OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear AppleTalk route table."
	::= { snRtATGeneral 4 }

snRtATClearTrafficCounters     OBJECT-TYPE
	SYNTAX  ClearStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"clear(1) will clear AppleTalk network statistics counters."
	::= { snRtATGeneral 5 }

snRtATArpRetransmitCount       OBJECT-TYPE
	SYNTAX  INTEGER (1..10)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The number of AppleTalk ARP request retransmits if the
		first request timeouts."
    DEFVAL  { 2 }
	::= { snRtATGeneral 6 }

snRtATArpRetransmitInterval    OBJECT-TYPE
	SYNTAX  INTEGER (1..120)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The waiting time interval for an AppleTalk ARP response
		before retransmission of an ARP request. Each unit value
		is one second."
    DEFVAL  { 1 }
	::= { snRtATGeneral 7 }

snRtATGleanPacketsEnable       OBJECT-TYPE
	SYNTAX  RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/disable AppleTalk glean packets function on this box."
    DEFVAL  { disabled }
	::= { snRtATGeneral 8 }

snRtATRtmpUpdateInterval       OBJECT-TYPE
	SYNTAX  INTEGER (1..3600)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The periodic time interval to transmit a RTMP
		update. Each unit value is one second."
    DEFVAL  { 10 }
	::= { snRtATGeneral 9 }

snRtATZipQueryInterval         OBJECT-TYPE
	SYNTAX  INTEGER (1..1000)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The periodic time interval to transmit a ZIP
		query. Each unit value is one second."
    DEFVAL  { 10 }
	::= { snRtATGeneral 10 }

snRtATInRtmpPkts               OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of RTMP packets received by
		this entity."
	::= { snRtATGeneral 11 }

snRtATOutRtmpPkts              OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of RTMP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 12 }

snRtATFilteredRtmpPkts         OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of RTMP packets which were
		filtered by this entity."
	::= { snRtATGeneral 13 }

snRtATInZipPkts                OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP packets received by
		this entity."
	::= { snRtATGeneral 14 }

snRtATOutZipPkts               OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 15 }

snRtATInZipGZLPkts             OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP get zone list packets received by
		this entity."
	::= { snRtATGeneral 16 }

snRtATOutZipGZLPkts            OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP get zone list packets which were
		transmitted from this entity."
	::= { snRtATGeneral 17 }

snRtATInZipNetInfoPkts         OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP network information packets received by
		this entity."
	::= { snRtATGeneral 18 }

snRtATOutZipNetInfoPkts        OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ZIP network information packets which were
		transmitted from this entity."
	::= { snRtATGeneral 19 }

snRtATInDdpPkts                OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of DDP datagrams received by
		this entity."
	::= { snRtATGeneral 20 }

snRtATOutDdpPkts               OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of DDP datagrams which were
		transmitted from this entity."
	::= { snRtATGeneral 21 }

snRtATForwardedDdpPkts         OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The number of input DDP datagrams for which this entity
		was not their final DDP destination, as a result of
		which an attempt was made to find a route to forward
		them to that final destination."
	::= { snRtATGeneral 22 }

snRtATInDeliveredDdpPkts       OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of input DDP datagrams for which
		this entity was their final DDP destination."
	::= { snRtATGeneral 23 }

snRtATDroppedNoRouteDdpPkts    OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of DDP datagrams dropped because a
		route could not be found to their final destination."
	::= { snRtATGeneral 24 }

snRtATDroppedBadHopCountsDdpPkts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of input DDP datagrams dropped
		because this entity was not their final destination
		and their hop count would exceed 15."
	::= { snRtATGeneral 25 }

snRtATDroppedOtherReasonsDdpPkts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of DDP datagrams dropped because
		of other reasons, e.g. run out of resouces."
	::= { snRtATGeneral 26 }

snRtATInAarpPkts               OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of AppleTalk ARP packets received by
		this entity."
	::= { snRtATGeneral 27 }

snRtATOutAarpPkts              OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of AppleTalk ARP packets which were
		transmitted from this entity."
	::= { snRtATGeneral 28 }


-- AppleTalk socket priority table

snRtATSocketPriorityTable      OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATSocketPriorityEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk socket priority table."
	::= { snAppleTalk 2 }

snRtATSocketPriorityEntry      OBJECT-TYPE
	SYNTAX  SnRtATSocketPriorityEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk socket priority table."
	INDEX   { snRtATSocketPrioritySocket }
	::= { snRtATSocketPriorityTable 1 }

SnRtATSocketPriorityEntry ::= SEQUENCE {
	snRtATSocketPrioritySocket
		INTEGER,
	snRtATSocketPriorityPriority
		INTEGER
	}

snRtATSocketPrioritySocket     OBJECT-TYPE
	SYNTAX  INTEGER (1..254)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"Socket number for a socket priority entry."
	::= { snRtATSocketPriorityEntry 1 }

snRtATSocketPriorityPriority OBJECT-TYPE
	SYNTAX  INTEGER {
		level0(0),
		level1(1),
		level2(2),
		level3(3),
		level4(4),
		level5(5),
		level6(6),
		level7(7)
		}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The Standalone router Priority level applies to a socket number:
		 low(0)   -- low prority
		 high(1) -- high prority.
		 The BigIron Priority levels applies to a socket number are:
		level0(0), level1(1), level2(2), level3(3),
		level4(4), level5(5), level6(6), level7(7) "
	::= { snRtATSocketPriorityEntry 2 }


-- AppleTalk interface zone filter table

snRtATPortZoneFilterTable      OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATPortZoneFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk interface zone filter table."
	::= { snAppleTalk 3 }

snRtATPortZoneFilterEntry      OBJECT-TYPE
	SYNTAX  SnRtATPortZoneFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk interface zone filter table."
	INDEX   { snRtATPortZoneFilterPortIndex, snRtATPortZoneFilterZone }
	::= { snRtATPortZoneFilterTable 1 }

SnRtATPortZoneFilterEntry ::= SEQUENCE {
	snRtATPortZoneFilterPortIndex
		PortIndex,
	snRtATPortZoneFilterZone
		ATName,
	snRtATPortZoneFilterAction
		Action,
	snRtATPortZoneFilterRtmpEnable
		RtrStatus,
	snRtATPortZoneFilterRowStatus
		RowSts
	}

snRtATPortZoneFilterPortIndex  OBJECT-TYPE
	SYNTAX  PortIndex
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index for a zone filter entry."
	::= { snRtATPortZoneFilterEntry 1 }

snRtATPortZoneFilterZone       OBJECT-TYPE
	SYNTAX  ATName
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The zone name granted for this filter."
	::= { snRtATPortZoneFilterEntry 2 }

snRtATPortZoneFilterAction     OBJECT-TYPE
	SYNTAX  Action
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if the AppleTalk packet match
		with this filter."
	::= { snRtATPortZoneFilterEntry 3 }

snRtATPortZoneFilterRtmpEnable OBJECT-TYPE
	SYNTAX  RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/disable RTMP filtering."
	::= { snRtATPortZoneFilterEntry 4 }

snRtATPortZoneFilterRowStatus  OBJECT-TYPE
	SYNTAX  RowSts
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"To create or delete a zone filter entry."
	::= { snRtATPortZoneFilterEntry 5 }


-- AppleTalk port table

snRtATPortTable                OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATPortEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk port table."
	::= { snAppleTalk 4 }

snRtATPortEntry                OBJECT-TYPE
	SYNTAX  SnRtATPortEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk port table."
	INDEX   { snRtATPortIndex }
	::= { snRtATPortTable 1 }

SnRtATPortEntry ::= SEQUENCE {
	snRtATPortIndex
		PortIndex,
	snRtATPortArpAge
		INTEGER,
	snRtATPortState
		INTEGER,
	snRtATPortSeedRouter
		INTEGER,
	snRtATPortOperationMode
		INTEGER
	}

snRtATPortIndex                OBJECT-TYPE
	SYNTAX  PortIndex
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index for port table entry."
	::= { snRtATPortEntry 1 }

snRtATPortArpAge               OBJECT-TYPE
	SYNTAX  INTEGER (0..240)
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The time in minutes an ARP entry can
		be valid without relearning. 
		0 - Don't age."
    DEFVAL  { 10 }
	::= { snRtATPortEntry 2 }

snRtATPortState                OBJECT-TYPE
	SYNTAX  INTEGER {
             other(1),
             down(2),
             up(3) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The up and down state of this port."
	::= { snRtATPortEntry 3 }

snRtATPortSeedRouter           OBJECT-TYPE
	SYNTAX  INTEGER {
             other(1),
             seedRouter(2),
             nonSeedRouter(3) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"This port was configured to seed or non-seed router."
	::= { snRtATPortEntry 4 }

snRtATPortOperationMode        OBJECT-TYPE
	SYNTAX  INTEGER {
             other(1),
             seedRouter(2),
             nonSeedRouter(3),
             notOperational(4),
             routingDisabled(5) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The operation mode of this port."
	::= { snRtATPortEntry 5 }


-- AppleTalk forwarding cache table

snRtATFwdCacheTable            OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATFwdCacheEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk forwarding cache table."
	::= { snAppleTalk 5 }

snRtATFwdCacheEntry            OBJECT-TYPE
	SYNTAX  SnRtATFwdCacheEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk forwarding cache table."
	INDEX   { snRtATFwdCacheIndex }
	::= { snRtATFwdCacheTable 1 }

SnRtATFwdCacheEntry ::= SEQUENCE {
	snRtATFwdCacheIndex
		INTEGER,
	snRtATFwdCacheNetAddr
		DdpNodeAddress,
	snRtATFwdCacheMacAddr
		OCTET STRING,
	snRtATFwdCacheNextHop
		DdpNodeAddress,
	snRtATFwdCacheOutgoingPort
		INTEGER,
	snRtATFwdCacheType
		INTEGER,
	snRtATFwdCacheAction
		INTEGER,
	snRtATFwdCacheVLanId
		INTEGER
	}

snRtATFwdCacheIndex            OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for an AppleTalk forwarding cache table entry."
	::= { snRtATFwdCacheEntry 1 }

snRtATFwdCacheNetAddr          OBJECT-TYPE
	SYNTAX  DdpNodeAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The AppleTalk network address of a station."
	::= { snRtATFwdCacheEntry 2 }

snRtATFwdCacheMacAddr          OBJECT-TYPE
	SYNTAX  OCTET STRING (SIZE (6))
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The Mac address of an AppleTalk station."
	::= { snRtATFwdCacheEntry 3 }

snRtATFwdCacheNextHop          OBJECT-TYPE
	SYNTAX  DdpNodeAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The next hop router network address."
	::= { snRtATFwdCacheEntry 4 }

snRtATFwdCacheOutgoingPort     OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The outgoing port of which packets will forward to.
		Return port value of zero to indicate no outgoing port
		associated to this entry."
	::= { snRtATFwdCacheEntry 5 }

snRtATFwdCacheType             OBJECT-TYPE
	SYNTAX  INTEGER { dynamic(1), permanent(2) }
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The 'dynamic' or 'permanent' type for an AppleTalk forwarding
		cache table entry."
	::= { snRtATFwdCacheEntry 6 }

snRtATFwdCacheAction           OBJECT-TYPE
	SYNTAX  INTEGER {
			other(1),
			forward(2),
			forUs(3),
			waitForArp(4),
			dropPacket(5)
			}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The action to take."
	::= { snRtATFwdCacheEntry 7 }

snRtATFwdCacheVLanId        OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The VLAN ID for an AppleTalk forwarding cache table entry.
		Return VLAN ID value of zero to indicate no VLAN associated
		to this entry."
	::= { snRtATFwdCacheEntry 8 }


-- AppleTalk zone table

snRtATZoneTable            OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATZoneEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk zone table."
	::= { snAppleTalk 6 }

snRtATZoneEntry            OBJECT-TYPE
	SYNTAX  SnRtATZoneEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk zone table."
	INDEX   { snRtATZoneIndex }
	::= { snRtATZoneTable 1 }

SnRtATZoneEntry ::= SEQUENCE {
	snRtATZoneIndex
		INTEGER,
	snRtATZoneNetStart
		ATNetworkNumber,
	snRtATZoneNetEnd
		ATNetworkNumber,
	snRtATZoneName
		ATName
	}

snRtATZoneIndex            OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The table index for an AppleTalk zone table entry."
	::= { snRtATZoneEntry 1 }

snRtATZoneNetStart         OBJECT-TYPE
	SYNTAX  ATNetworkNumber
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
        "The first AppleTalk network address in the range
        of this zone name."
	::= { snRtATZoneEntry 2 }

snRtATZoneNetEnd           OBJECT-TYPE
	SYNTAX  ATNetworkNumber
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
        "The last AppleTalk network address in the range
        of this zone name."
	::= { snRtATZoneEntry 3 }

snRtATZoneName             OBJECT-TYPE
	SYNTAX  ATName
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The zone name."
	::= { snRtATZoneEntry 4 }


-- AppleTalk additional zone filter table

snRtATAddZoneFilterTable       OBJECT-TYPE
	SYNTAX  SEQUENCE OF SnRtATAddZoneFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"AppleTalk additional zone filter table. Additional zones
		are those zones that do not match any zones defined in the
		zone filter table."
	::= { snAppleTalk 7 }

snRtATAddZoneFilterEntry       OBJECT-TYPE
	SYNTAX  SnRtATAddZoneFilterEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"An entry in the AppleTalk additional zone filter table."
	INDEX   { snRtATAddZoneFilterPortIndex }
	::= { snRtATAddZoneFilterTable 1 }

SnRtATAddZoneFilterEntry ::= SEQUENCE {
	snRtATAddZoneFilterPortIndex
		PortIndex,
	snRtATAddZoneFilterAction
		Action,
	snRtATAddZoneFilterRtmpEnable
		RtrStatus
	}

snRtATAddZoneFilterPortIndex   OBJECT-TYPE
	SYNTAX  PortIndex
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The port index for additional zone filter table entry."
	::= { snRtATAddZoneFilterEntry 1 }

snRtATAddZoneFilterAction      OBJECT-TYPE
	SYNTAX  Action
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Action to take if no zone filter match."
	::= { snRtATAddZoneFilterEntry 2 }

snRtATAddZoneFilterRtmpEnable  OBJECT-TYPE
	SYNTAX  RtrStatus
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Enable/disable RTMP filtering on additional zone."
	::= { snRtATAddZoneFilterEntry 3 }

END