mibs/MIBS/huawei/HUAWEI-LI-MIB

898 lines
30 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ==================================================================
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI LI Management MIB HWAWEI-LI-MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 s49159, 2007-06-10, publish
-- ==================================================================
HUAWEI-LI-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
InetAddress, InetPortNumber, InetAddressType, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, BITS, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, MacAddress, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
hwLiMib MODULE-IDENTITY
LAST-UPDATED "200706270000Z"
ORGANIZATION
"hw Technologies co.,Ltd."
CONTACT-INFO
" R&D Meaning, huawei Technologies co.,Ltd.
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"This module manages huawei's Lawful interception feature."
REVISION "200706270000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { hwDatacomm 131 }
--
-- Textual conventions
--
HWLiDscp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of the DiffServ codepoint
values."
SYNTAX Integer32 (0..63)
--
-- Node definitions
--
hwLiMibNotifs OBJECT IDENTIFIER ::= { hwLiMib 1 }
hwLiMibActive NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification is sent when an intercepting router or switch is first
capable of intercepting a packet corresponding to a configured data stream. "
::= { hwLiMibNotifs 1 }
hwLiX3HeartBeatAlarm NOTIFICATION-TYPE
OBJECTS { hwLiGatewayX3Address }
STATUS current
DESCRIPTION
"This notification is sent when an LIG is lost connection to the device
which intercepting packet corresponding to a configured data stream. "
::= { hwLiMibNotifs 2 }
hwLiX3HeartBeatRecover NOTIFICATION-TYPE
OBJECTS { hwLiGatewayX3Address }
STATUS current
DESCRIPTION
"This notification is sent when an LIG is recover connection to the device
which intercepting packet corresponding to a configured data stream. "
::= { hwLiMibNotifs 3 }
hwLiMibObjects OBJECT IDENTIFIER ::= { hwLiMib 2 }
hwLiAgentObjects OBJECT IDENTIFIER ::= { hwLiMibObjects 1 }
hwLiAgentTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the LI agent.Read-only."
::= { hwLiAgentObjects 1 }
hwLiAgentEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the LI agent.Read-only."
::= { hwLiAgentObjects 2 }
hwLiAgentX2IpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the X2 interface in LI agent.Just can be read by server
and can be set in command line."
::= { hwLiAgentObjects 3 }
hwLiAgentX2Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port of the X2 interface in LI agent.Just can be read by server
and can be set in command line."
::= { hwLiAgentObjects 4 }
hwLiAgentX3IpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the X3 interface in LI agent.Just can be read by server
and can be set in command line."
::= { hwLiAgentObjects 5 }
hwLiAgentX3Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port of the X3 interface in LI agent.Just can be read by server
and can be set in command line."
::= { hwLiAgentObjects 6 }
hwLiGatewayGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 3 }
hwLiGatewayNewIndex OBJECT-TYPE
SYNTAX Integer32 (0 | 1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a value which may be used as an index
value for a new HwLiGatewayEntry. This is to reduce
the probability of errors during creation of new hwLiGatewayTable
entries.0 means no free resource."
::= { hwLiGatewayGroup 1 }
hwLiGatewayTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLiGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the LI Gateway Devices with which the
intercepting device communicates.
This table is written by the LI Gateway Device, and is always
volatile. This is because intercepts may disappear during a
restart of the intercepting equipment.
Entries are added to this table via hwLiGatewayStatus in
accordance with the RowStatus convention."
::= { hwLiGatewayGroup 2 }
hwLiGatewayEntry OBJECT-TYPE
SYNTAX HwLiGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry describes a single session maintained with an
application on a LI Gateway Device."
INDEX { hwLiGatewayIndex }
::= { hwLiGatewayTable 1 }
HwLiGatewayEntry ::=
SEQUENCE {
hwLiGatewayIndex
Integer32,
hwLiGatewayAddressType
InetAddressType,
hwLiGatewayX2Protocol
INTEGER,
hwLiGatewayX2Address
InetAddress,
hwLiGatewayX2Port
InetPortNumber,
hwLiGatewayX3Protocol
INTEGER,
hwLiGatewayX3Address
InetAddress,
hwLiGatewayX3Port
InetPortNumber,
hwLiGatewayX3HeartBeatTimer
Integer32,
hwLiGatewayX3NoResponseNum
Integer32,
hwLiGatewayX3OperateStatus
INTEGER,
hwLiGatewayX3Dscp
HWLiDscp,
hwLiGatewayRowStatus
RowStatus,
hwLiGatewayX3AddressType
InetAddressType,
hwLiGatewayX2AddressType
InetAddressType
}
hwLiGatewayIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the LIG itself."
::= { hwLiGatewayEntry 1 }
hwLiGatewayAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in LIG"
DEFVAL { ipv4 }
::= { hwLiGatewayEntry 2 }
hwLiGatewayX2Protocol OBJECT-TYPE
SYNTAX INTEGER
{
udp(1),
tcp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol used in transferring intercepted data to the
Gateway Device. "
DEFVAL { tcp }
::= { hwLiGatewayEntry 3 }
hwLiGatewayX2Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the Gateway Device's network interface
to which to direct IRI."
::= { hwLiGatewayEntry 4 }
hwLiGatewayX2Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number on the Gateway Device's network interface
to which to direct IRI."
::= { hwLiGatewayEntry 5 }
hwLiGatewayX3Protocol OBJECT-TYPE
SYNTAX INTEGER
{
udp(1),
tcp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol used in transferring intercepted data to the
Gateway Device. "
DEFVAL { udp }
::= { hwLiGatewayEntry 6 }
hwLiGatewayX3Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the Gateway Device's network interface
to which to direct CC."
::= { hwLiGatewayEntry 7 }
hwLiGatewayX3Port OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number on the Gateway Device's network interface
to which to direct intercepted traffic."
::= { hwLiGatewayEntry 8 }
hwLiGatewayX3HeartBeatTimer OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The timer for sending HeartBeat to LIG,In seconds"
DEFVAL { 5 }
::= { hwLiGatewayEntry 9 }
hwLiGatewayX3NoResponseNum OBJECT-TYPE
SYNTAX Integer32 (2..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The times of heartbeats that allowed to missed from LIG"
DEFVAL { 3 }
::= { hwLiGatewayEntry 10 }
hwLiGatewayX3OperateStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
noHeartBeat(2),
linkdown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operate status of X3 interface"
::= { hwLiGatewayEntry 11 }
hwLiGatewayX3Dscp OBJECT-TYPE
SYNTAX HWLiDscp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Differentiated Services Code Point the intercepting
device applies to the IP packets encapsulating the
intercepted traffic."
DEFVAL { 0 }
::= { hwLiGatewayEntry 12 }
hwLiGatewayRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object is used to
manage creation, modification and deletion of rows in this
table.
"
::= { hwLiGatewayEntry 14 }
hwLiGatewayX3AddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in LIG"
DEFVAL { ipv4 }
::= { hwLiGatewayEntry 15 }
hwLiGatewayX2AddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in LIG"
DEFVAL { ipv4 }
::= { hwLiGatewayEntry 16 }
hwLiGatewayCapabilities OBJECT-TYPE
SYNTAX BITS
{
ipv4SrcInterface(0),
ipv6SrcInterface(1),
udp(2),
tcp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the device capabilities with respect to
certain fields in Gateway Device table. This may be dependent
on hardware capabilities, software capabilities.
The following values may be supported:
ipv4SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
hwLiGatewaySrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv4
address Gateway Device.
ipv6SrcInterface: SNMP ifIndex Value may be used to select
the interface (denoted by
hwLiGatewaySrcInterface) on the
intercepting device from which to
transmit intercepted data to an IPv6
address Gateway Device.
udp: UDP may be used as transport protocol
(denoted by hwLiGatewayTransport) in
transferring intercepted data to the
Gateway Device.
tcp: TCP may be used as transport protocol
(denoted by hwLiGatewayTransport) in
transferring intercepted data to the
Gateway Device."
::= { hwLiGatewayGroup 3 }
hwLiStreamGroup OBJECT IDENTIFIER ::= { hwLiMibObjects 4 }
hwLiStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLiStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Intercept Stream Table lists the IPv4 and IPv6 streams
to be intercepted. The same data stream must be used by
one LIG.
The first index indicates which LIG the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together, such as
having an IP address as source or destination."
::= { hwLiStreamGroup 2 }
hwLiStreamEntry OBJECT-TYPE
SYNTAX HwLiStreamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported."
INDEX { hwLiGatewayIndex, hwLiStreamIndex }
::= { hwLiStreamTable 1 }
HwLiStreamEntry ::=
SEQUENCE {
hwLiStreamIndex
Integer32,
hwLiStreamLiId
Unsigned32,
hwLiStreamActivationType
INTEGER,
hwLiStreamSessionId
Integer32,
hwLiStreamTargetIdType
INTEGER,
hwLiStreamSrcMacAddress
MacAddress,
hwLiStreamDstMacAddress
MacAddress,
hwLiStreamSrcIpAddress
InetAddress,
hwLiStreamSrcIpLength
InetAddressPrefixLength,
hwLiStreamDstIpAddress
InetAddress,
hwLiStreamDstIpLength
InetAddressPrefixLength,
hwLiStreamProtocol
Integer32,
hwLiStreamSrcPort
InetPortNumber,
hwLiStreamDstPort
InetPortNumber,
hwLiStreamIfIndex
Integer32,
hwLiStreamUserName
OCTET STRING,
hwLiStreamRowStatus
RowStatus,
hwLiStreamSrcIpAddressType
InetAddressType,
hwLiStreamDstIpAddressType
InetAddressType,
hwLiStreamSrcVpnName
OCTET STRING,
hwLiStreamDstVpnName
OCTET STRING,
hwLiStreamL2tpIfIndex
Integer32,
hwLiStreamL2tpVlanId
Integer32,
hwLiStreamAcctSessionId
OCTET STRING
}
hwLiStreamIndex OBJECT-TYPE
SYNTAX Integer32 (1..8192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the stream itself."
::= { hwLiStreamEntry 1 }
hwLiStreamLiId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID indicate a independency stream in a LIG ."
::= { hwLiStreamEntry 2 }
hwLiStreamActivationType OBJECT-TYPE
SYNTAX INTEGER
{
iri(1),
cc(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Intercepted IRI or CC or BOTH."
DEFVAL { cc }
::= { hwLiStreamEntry 3 }
hwLiStreamSessionId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the stream itself.0 means no session ID will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 4 }
hwLiStreamTargetIdType OBJECT-TYPE
SYNTAX INTEGER
{
oneDirection(1),
biDirection(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Target ID type specifies the type of packets.
1 means one direction traffic is intercept,
2 means bidirectional traffic is intercept.
for bidirectional interception, if the source IP or destination IP
in a packet is equal with the configured hwLiStreamSrcIpAddress<73><73>
If other condition is satisfied then the packet is intercepted.
for one-directional interception, if the sourceIP and DestinationIP
in a packet is equal with the configured hwLiStreamSrcIpAddress and
hwLiStreamDstIPAddress<73><73>If other condition is satisfied then the
packet is intercepted"
DEFVAL { biDirection }
::= { hwLiStreamEntry 5 }
hwLiStreamSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source Mac address of the packets which will be intercepted.0000-0000-0000 means no MAC address will be specified"
::= { hwLiStreamEntry 7 }
hwLiStreamDstMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination Mac address of the packets which will be intercepted."
::= { hwLiStreamEntry 8 }
hwLiStreamSrcIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Source Address used in packet selection. This address will
be of the type specified in hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified"
DEFVAL { '00000000'H }
::= { hwLiStreamEntry 9 }
hwLiStreamSrcIpLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the Source Prefix. A value of 32 causes all
addresses to match. This prefix length will be consistent with
the type specified in hwLiStreamIpAddrType."
DEFVAL { 32 }
::= { hwLiStreamEntry 10 }
hwLiStreamDstIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Destination address or prefix used in packet selection.
This address will be of the type specified in
hwLiStreamIpAddrType.0.0.0.0 means no IP address will be specified"
DEFVAL { '00000000'H }
::= { hwLiStreamEntry 11 }
hwLiStreamDstIpLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of the Destination Prefix. A value of 32 causes
all addresses to match. This prefix length will be consistent
with the type specified in hwLiStreamIpAddrType."
DEFVAL { 32 }
::= { hwLiStreamEntry 12 }
hwLiStreamProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protocol type of the packets which will be intercepted.0 means no Protocol type will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 13 }
hwLiStreamSrcPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port.0 means no Port will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 14 }
hwLiStreamDstPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer Destination port.0 means no Port will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 15 }
hwLiStreamIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface switch carrying the intercepted taffic.0 means no interface will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 16 }
hwLiStreamUserName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The username whose traffic will be intercepted.zero-length means no user will be specified"
::= { hwLiStreamEntry 17 }
hwLiStreamRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object is used to
manage creation, modification and deletion of rows in this
table."
::= { hwLiStreamEntry 18 }
hwLiStreamSrcIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source IP address of the interception stream"
DEFVAL { ipv4 }
::= { hwLiStreamEntry 19 }
hwLiStreamDstIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address of the interception stream"
DEFVAL { ipv4 }
::= { hwLiStreamEntry 20 }
hwLiStreamSrcVpnName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source VPN instance name whose traffic will be intercepted.zero-length means no VPN will be specified"
::= { hwLiStreamEntry 21 }
hwLiStreamDstVpnName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination VPN instance name whose traffic will be intercepted. zero-length means no VPN will be specified"
::= { hwLiStreamEntry 22 }
hwLiStreamL2tpIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The L2TP ifindex of intercepting stream.0 means no l2tpIfindex will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 23 }
hwLiStreamL2tpVlanId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The L2TP VLAN ID of intercepting stream.0 means no Vlan will be specified"
DEFVAL { 0 }
::= { hwLiStreamEntry 24 }
hwLiStreamAcctSessionId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The accounting session ID of intercepting stream.zero-length means no accouting session ID will be specified"
::= { hwLiStreamEntry 25 }
hwLiMibConform OBJECT IDENTIFIER ::= { hwLiMib 3 }
hwLiMibCompliances OBJECT IDENTIFIER ::= { hwLiMibConform 2 }
hwLiMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwLiGatewayComplianceGroup, hwLiStreamComplianceGroup, hwLiNotificationGroup, hwLiGatewayCpbComplianceGroup }
::= { hwLiMibCompliances 1 }
hwLiMibGroups OBJECT IDENTIFIER ::= { hwLiMibConform 3 }
hwLiAgentComplianceGroup OBJECT-GROUP
OBJECTS { hwLiAgentTime, hwLiAgentEnable, hwLiAgentX2IpAddress, hwLiAgentX2Port, hwLiAgentX3IpAddress,
hwLiAgentX3Port }
STATUS current
DESCRIPTION
"Description."
::= { hwLiMibGroups 1 }
hwLiGatewayComplianceGroup OBJECT-GROUP
OBJECTS { hwLiGatewayNewIndex, hwLiGatewayAddressType, hwLiGatewayX2Protocol, hwLiGatewayX2Address, hwLiGatewayX2Port,
hwLiGatewayX3Protocol, hwLiGatewayX3Address, hwLiGatewayX3Port, hwLiGatewayX3HeartBeatTimer, hwLiGatewayX3NoResponseNum,
hwLiGatewayX3OperateStatus, hwLiGatewayX3Dscp, hwLiGatewayRowStatus,hwLiGatewayX3AddressType,hwLiGatewayX2AddressType }
STATUS current
DESCRIPTION
"Description."
::= { hwLiMibGroups 2 }
hwLiStreamComplianceGroup OBJECT-GROUP
OBJECTS { hwLiStreamLiId, hwLiStreamActivationType, hwLiStreamSessionId, hwLiStreamTargetIdType,
hwLiStreamProtocol, hwLiStreamSrcPort,hwLiStreamDstPort,hwLiStreamSrcMacAddress, hwLiStreamDstMacAddress, hwLiStreamSrcIpAddress, hwLiStreamSrcIpLength,
hwLiStreamDstIpAddress, hwLiStreamDstIpLength, hwLiStreamIfIndex, hwLiStreamUserName, hwLiStreamRowStatus,
hwLiStreamSrcIpAddressType,hwLiStreamDstIpAddressType,hwLiStreamSrcVpnName,hwLiStreamDstVpnName,
hwLiStreamL2tpIfIndex,hwLiStreamL2tpVlanId,hwLiStreamAcctSessionId }
STATUS current
DESCRIPTION
"Description."
::= { hwLiMibGroups 3 }
hwLiNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwLiMibActive, hwLiX3HeartBeatAlarm, hwLiX3HeartBeatRecover}
STATUS current
DESCRIPTION
"Description."
::= { hwLiMibGroups 4 }
hwLiGatewayCpbComplianceGroup OBJECT-GROUP
OBJECTS { hwLiGatewayCapabilities }
STATUS current
DESCRIPTION
"Description."
::= { hwLiMibGroups 5 }
END